Polyelectrolyte complex formation using alginate and chitosan

Nanoencapsulation of ascorbic acid loaded in pluronic® F127 coated by chitosan-alginate polyelectrolyte complex and application of a direct quantification method to enhance its accuracy

Ascorbic acid (AA) is an active ingredient in numerous food, pharmaceutical, and cosmetic products. Due to its high instability and reactivity, encapsulation is a strategy to enhance its bioavailability. However, encapsulating AA is challenging, and assessing its encapsulation efficiency (EE) also poses difficulties because the indirect method typically used is inappropriate for AA, as it does not consider AA's degradation kinetics. The composite nanoparticles (NPs) were prepared by using three biocompatible polymers - pluronic® F127 (PLX), alginate (ALG), and chitosan (CS). PLX micelles loaded with six distinct AA amounts (1 to 20 mg) were coated by CS-ALG polyelectrolyte complex (PEC). SEM images indicated that NPs have an almost spherical shape, while TEM images confirm the presence of PLX micelles within the NPs. The average particle size ranged from 291 to 399 nm, with a Zeta potential exceeding 34 mV and a polydispersity index of <0.32 for AA-loaded NPs formulations. Regarding the inconsistencies in AA quantification, we applied a colorimetric method for quantifying AA directly in the NPs and for accurately quantifying AA in release studies (pH 5.5 and 7.4). CS-ALG PEC NPs showed suitable properties for short-term topical treatments, delivering AA at a constant rate over time.

Low friction hydrogel with diclofenac eluting ability for dry eye therapeutic contact lenses

When placed in the eye, contact lenses (CLs) disturb the tear fluid and affect the natural tribological behaviour of the eye. The disruption in the contact mechanics between the ocular tissues can increase frictional shear stress and ocular dryness, causing discomfort. Ultimately, continuous CLs wear can trigger inflammation which is particularly critical for people suffering from dry eye. In this work, a double strategy was followed to obtain therapeutic daily disposable CLs for dry eye: a hydroxyethyl methacrylate (HEMA) based hydrogel was coated with two natural polysaccharides, chitosan (CHI) and hyaluronic acid (HA) and posteriorly loaded with an anti-inflammatory drug (diclofenac, DCF). Material sterilisation was carried out by high hydrostatic pressure (HHP) combined with moderate temperature. The friction coefficient (μ) was determined in the presence of different tear biomolecules (cholesterol, lysozyme and albumin) using a nanotribometer. Drug release experiments were performed in static and in hydrodynamic conditions. The material was extensively characterised, regarding surface morphology/topography, optical properties, water content and swelling behaviour, wettability, ionic and oxygen permeability and mechanical properties. It was found that the coating did not impair the physico-chemical properties relevant for the material's application in CLs. Besides, it also ensured a sustained release of DCF for 24 h in tests performed in hydrodynamic conditions that simulate those found in the eye, increasing significantly the amount of drug released. It reduced friction, improving the lubrication ability of the hydrogel, and presented antibacterial properties against S. aureus, P. aeruginosa and B. Cereus. The coated samples did not reveal any signs of cytotoxicity or potential eye irritation. Overall, the coating of the hydrogel may be useful to produce daily CLs able to alleviate dry eye symptoms and the discomfort of CLs wearers.

Iota-Carrageenan/Chitosan Nanoparticles via Coacervation: Achieving Stability for Tiny Particles

This study investigated the influence of parameters such as pH condition, polyelectrolyte concentration, polymer ratio, and order of addition of the commercial polyelectrolytes chitosan and iota-carrageenan (ι-carrageenan) on the formation of polymeric nanoparticles in suspension (coacervates). A preliminary purification step of the polymers was essential for obtaining stable nanoparticles with small sizes as impurities, particularly metal ions that interfere with complexation, are removed by dialysis. Microparticles (13.5 μm in dry diameter) are obtained when aliquots of chitosan solution are poured into the ι-carrageenan solution. In general, an excess of chitosan results in the formation of agglomerated particles. The addition of an aliquot of ι-carrageenan solution (30 mL at 0.6 mg/mL and pH 4.0) to the chitosan solution (6.0 mL at 0.3 mg/mL and pH 4.0) leads to dispersed nanoparticles with a hydrodynamic radius of 278 ± 5 nm, a zeta potential of -31 ± 3 mV, and an average dry diameter of 45 ± 11 nm. The hydrodynamic radius increases as the pH rises. The partial deprotonation of ι-carrageenan chains enhances the interaction with water molecules, causing the particles to swell. These findings contribute to the fundamental understanding of polyelectrolyte complexation processes in aqueous suspension and provide insights for developing stable nanomaterials for potential practical applications.

Effect of Hyaluronan Molecular Weight on the Stability and Biofunctionality of Microfibers Assembled by Interfacial Polyelectrolyte Complexation

Nervous system disorders are characterized by a progressive loss of function and structure of neurons that ultimately leads to a decline in cognitive and motor functions. In this study, we used interfacial polyelectrolyte complexation (IPC) to produce fibers for neural tissue regeneration. IPC is a processing method that allows spinning of sensitive biopolymers. The rate of spinning and the properties of the used biopolymers (charge and molecular weight) influence different characteristics of the fibers such as size and stability, among others. We used two major components of the neuronal stem cell niche, the polycationic collagen (Col) and the polyanionic hyaluronic acid (HA), to obtain bioactive fibers. We tested HA with different molecular weights and found that HA with medium and high molecular weights (350 and 1200 kDa, respectively) enabled drawing of microfibers with a homogeneous distribution of Col and HA, whereas low-molecular-weight HA (40 kDa) did not allow spinning. The obtained microfibers showed high swelling ability in a physiological buffer: their diameters increased more than 5-fold from their dry state. At these conditions, the tensile storage moduli of the fibers were similar to nervous tissues. Collagenase and hyaluronidase did not change the morphology of the fibers for up to 3 days but reduced their moduli 2- to 3-fold. Assays with PC12 neuronal-like cells showed that IPC microfibers support cell adhesion and viability regardless of the molecular weight of the used HA.

Effect of Degree of Substitution and Polymer Ratio on the Structure of Chitosan: Carboxymethyl Starch (Bio)Polyelectrolyte Complexes

In this work, three carboxymethyl starches (CMS) were obtained by the two-step reaction process of carboxymethylation with different degrees of substitution (0.16, 0.33, and 0.36). From these samples, (bio)polyelectrolyte complexes ((bio)PECs) were obtained with chitosan (Chit) by the mixing of individual solutions of polymers (0.25 wt.%) at different volume ratios. The effect of the biopolymer and ionized groups of z ratios, pH, and degree of substitution of CMS in the formation of PEC were evaluated by turbidimetry and dynamic light scattering. The results showed that increasing the amount of CMS samples (ratio of z) led to an increase in the efficiency of the formation of (bio)PEC using CMS with a high DS value. Using the turbidimetry method for the chitosan and CMS mixtures, it was observed that the formation of (bio)PEC is divided into four transition zones delimited by pH transition points, and the stoichiometric complexation (z = 1) is achieved at a pH that displayed morphological changes "pHmorph", which is a single point for Chit:CMS 1, and for Chit:CMS 2 and Chit:CMS 3, this is a range of 4.9-6.4 and 4.3-6.4, respectively. Analysis of the structural properties of the structures of (bio)PECs by dynamic light scattering was characterized by monomodal distribution, and the main observed effect was associated with an increase in the value of Davg with an increase in the ratio of Chit:CMS.

Design Strategy, On-Demand Control, and Biomedical Engineering Applications of Wet Adhesion

The adhesion of tissues to external devices is fundamental to numerous critical applications in biomedical engineering, including tissue and organ repair, bioelectronic interfaces, adhesive robotics, wearable electronics, biomedical sensing and actuation, as well as medical monitoring, treatment, and healthcare. A key challenge in this context is that tissues are typically situated in aqueous and dynamic environments, which poses a bottleneck to further advancements in these fields. Wet adhesion technology (WAT) presents an effective solution to this issue. In this review, we summarize the three major design strategies and control methods of wet adhesion, comprehensively and systematically introducing the latest applications and advancements of WAT in the field of biomedical engineering. First, single adhesion mechanism under the frameworks of the three design strategies is systematically introduced. Second, control methods for adhesion are comprehensively summarized, including spatiotemporal control, detachment control, and reversible adhesion control. Third, a systematic summary and discussion of the latest applications of WAT in biomedical engineering research and education were presented, with a particular focus on innovative applications such as tissue-electronic interface devices, ingestible devices, end-effector components, in vivo medical microrobots, and medical instruments and equipment. Finally, opportunities and challenges encountered in the design and development of wet adhesives with advanced adhesive performance and application prospects are discussed.

Alginate Formulation for Wound Healing Applications

Significance: Alginate, sourced from seaweed, holds significant importance in industrial and biomedical domains due to its versatile properties. Its chemical composition, primarily comprising β-D-mannuronic acid and α-L-guluronic acid, governs its physical and biological attributes. This polysaccharide, extracted from brown algae and bacteria, offers diverse compositions impacting key factors such as molecular weight, flexibility, solubility, and stability. Recent Advances: Commercial extraction methods yield soluble sodium alginate essential for various biomedical applications. Extraction processes involve chemical treatments converting insoluble alginic acid salts into soluble forms. While biosynthesis pathways in bacteria and algae share similarities, differences in enzyme utilization and product characteristics are noted. Critical Issues: Despite its widespread applicability, challenges persist regarding alginate's stability, biodegradability, and bioactivity. Further understanding of its interactions in complex biological environments and the optimization of extraction and synthesis processes are imperative. Additionally, concerns regarding immune responses to alginate-based implants necessitate thorough investigation. Future Directions: Future research endeavors aim to enhance alginate's stability and bioactivity, facilitating its broader utilization in regenerative medicine and therapeutic interventions. Novel approaches focusing on tailored hydrogel formations, advanced drug delivery systems, and optimized cellular encapsulation techniques hold promise. Continued exploration of alginate's potential in tissue engineering and wound healing, alongside efforts to address critical issues, will drive advancements in biomedical applications.

Unveiling the Electrostatically Driven Collapsing and Relaxation of Polyelectrolyte-Colloid Complexes: A Tunable Pathway to Colloidal Assembly

Polyelectrolyte-colloid (PEC) complexes, ubiquitous across diverse fields, exhibit remarkable phase transitions, mimicking intricate biological assemblies. While the role of electrostatic forces in the PEC complex assembly is undeniable, achieving a holistic comprehension remains an elusive goal. This study unveils a fascinating phenomenon: the formation of highly collapsed coacervate structures in PEC complexes at elevated polyelectrolyte concentrations, followed by the swelling of complexes at even higher concentrations. Employing anionic silica colloids and cationic chitosan as a model system, small-angle X-ray/neutron (SAXS/SANS) elucidates the transition from a bead-on-a-necklace-like phase to a dense packed coacervate state (with volume fraction ∼0.62) until 3 wt % concentration of the polyelectrolyte. However, beyond 3 wt %, swelling of the dense collapsed assembly is observed. This structural evolution of PEC complexes as a function of chitosan concentration is attributed to the interplay of electrostatically driven interactions and the Donnan effect. Notably, the critical concentration for coacervation, Cs*, demonstrates a linear dependence on the initial colloid concentration. Interestingly, a complete expansion of the coacervate is observed at a high polyelectrolyte concentration, particularly for dilute colloid solutions (2 wt %). Furthermore, the addition of an electrolyte sheds light on the delicate interplay of forces. While a low electrolyte concentration partially screens charges, leading to a shift in phase diagram, higher concentrations trigger complete coacervate dissolution beyond the critical electrolyte concentration of 0.2 M, due to the complete screening of electrostatic charges.

Recent advances in alginate-based composite gel spheres for removal of heavy metals

The discharge of heavy metal ions from industrial wastewater into natural water bodies is a consequence of global industrialisation. Due to their high toxicity and resistance to degradation, these heavy metal ions pose a substantial threat to human health as they accumulate and amplify. Alginate-based composite gels exhibit good adsorption and mechanical properties, excellent biodegradability, and non-toxicity, making them environmentally friendly heavy metal ion adsorbents for water with promising development prospects. This paper introduces the basic properties, cross-linking methods, synthetic approaches, modification methods, and manufacturing techniques of alginate-based composite gels. The adsorption properties and mechanical strength of these gels can be enhanced through surface modification, multi-component mixing, and embedding. The main production processes involved are sol-gel and cross-linking methods. Additionally, this paper reviews various applications of alginate composite gels for common heavy metals, rare earth elements, and radionuclides and elucidates the adsorption mechanism of alginate composite gels. This study aimed to provide a reference for synthesising new, efficient, and environmentally friendly alginate-based adsorbents and to contribute new ideas and directions for addressing the issue of heavy metal pollution.

Research progresses on carboxymethyl xanthan gum: Review of synthesis, physicochemical properties, rheological characterization and applications in drug delivery

Xanthan gum is a nonionic polysaccharide widely explored in biomedical, nutraceutical, and pharmaceutical fields. XG suffers from several drawbacks like poor dissolution, lower bioavailability and an inability to form hydrogels. The carboxymethyl derivative of XG, CMX, has better solubility, dissolution, and bioavailability characteristics. Moreover, due to its anionic character, it forms water insoluble hydrogels upon crosslinking with metal cations. CMX hydrogels are used to prepare matrix tablets, microparticles, beads, and films. CMX hydrogels has been used in drug delivery and tissue engineering fields. CMX hydrogels are used for sustained gastrointestinal, colon targeted, and transdermal delivery of drugs. CMX nanoparticles have been used for targeted delivery of anticancer drugs to tumor cells. CMX hydrogels have already made significant strides in drug delivery and tissue engineering fields. Further understanding of the physicochemical properties and rheological characteristics of CMX would enable researchers to explore newer applications of CMX. This review article thus aims to discuss the synthesis, physicochemical properties, and rheological characteristics of CMX. The article also gives critical insights on the versatility of CMX as a drug delivery carrier and presents prospective trends on applications of CMX.

Cationized gelatin-sodium alginate polyelectrolyte nanoparticles encapsulating moxifloxacin as an eye drop to treat bacterial keratitis

A mucoadhesive polyelectrolyte complex (PEC) nanoparticles were developed for ocular moxifloxacin (Mox) delivery in Bacterial Keratitis (BK). Moxifloxacin-loaded G/CG-Alg NPs were prepared by an amalgamation of cationic polymers (gelatin (G)/cationized gelatin (CG)), and anionic polymer (sodium alginate (Alg)) along with Mox respectively. Mox@CG-Alg NPs were characterized for physicochemical parameters such as particle size (DLS technique), morphology (SEM analysis), DSC, XRD, encapsulation efficiency, drug loading, mucoadhesive study (by texture analyzer), mucin turbidity, and viscosity assessment. The NPs uptake and toxicity of the formulation were analyzed in the Human Corneal Epithelial (HCE) cell line and an ocular irritation study was performed on the HET-CAM. The results indicated that the CG-Alg NPs, with optimal size (217.2 ± 4 nm) and polydispersity (0.22 ± 0.05), have shown high cellular uptake in monolayer and spheroids of HCE. The drug-loaded formulation displayed mucoadhesiveness, trans-corneal permeation, and sustained the release of the Mox. The anti-bacterial efficacy studied on planktonic bacteria/biofilms of P. aeruginosa and S. aureus (in vitro) indicated that the Mox@CG-Alg NPs displayed low MIC, higher zone of bacterial growth inhibition, and cell death compared to free Mox. A significant reduction of bacterial load was observed in the BK-induced mouse model.

Design of bioactive and biomimetic scaffolds based on chitosan-alginate polyelectrolyte complexes for tissue engineering

The replacement and regeneration of biological tissues by fabricating three-dimensional functionalized constructs that can improve material interaction with cells is an important challenge of tissue engineering. In this study, bioactive and biomimetic scaffolds based on chitosan-alginate polyelectrolyte complexes (PECs) were fabricated by freeze-drying method and then crosslinked with CaCl2. Various chitosan-alginate (CS-AL) molar ratios were used to obtain PECs with different structural and mechanical properties. The CS1-AL2.3 scaffold showed to possess the best mechanical properties (8 MPa) and good pore morphology with an average size of 100-150 μm. After the crosslinking process, a less porous structure but with higher elastic modulus (30 MPa) was obtained. To make matrix bioactive and biomimetic, the CS1-AL2.3 system was first functionalized with 3,4-dihydroxyhydrocinnamic acid (HCAF) and then with PySO3 or Heparin to introduce groups/molecules mimicking the extracellular matrix. While the antioxidant properties of the scaffolds containing HCAF improved by 3 orders of magnitude, compared to the non-functionalized matrix, the introduction of sulfonic groups into the bioactive scaffold made the structure more porous and hydrophilic with respect to the heparinized one also favoring the penetration and proliferation of fibroblasts into the scaffold. These results indicate the potential of these novel systems for tissue engineering.

Modulation the Synergistic Effect of Chitosan-Sodium Alginate Nanoparticles with Ca2+: Enhancing the Stability of Pickering Emulsion on D-Limonene

Pickering emulsions (PEs) have been regarded as an effective approach to sustaining and preserving the bioactivities of essential oils. The aim of this research is to prepare a PE stabilized by chitosan/alginate nanoparticles (CS-SA NPs) for the encapsulation and stabilization of D-limonene. In this work, the influence of calcium ions (Ca2+) on the morphology and interaction of nanoparticles was studied, and then the preparation technology of CS-SA/Ca2+ NPs was optimized. The results showed that the presence of Ca2+ reduced the size of the nanoparticles and made them assume a spherical structure. In addition, under the conditions of 0.2 mg/mL CaCl2, 0.6 mg/mL SA, and 0.4 mg/mL CS, the CS-SA/Ca2+ NPs had the smallest size (274 ± 2.51 nm) and high stability (-49 ± 0.69 mV). Secondly, the PE was prepared by emulsifying D-limonene with CS-SA/Ca2+ NPs, and the NP concentrations and homogenization speeds were optimized. The results showed that the small droplet size PE could be prepared with 2 mg/mL NP and a homogenization speed of 20,000 r/min, and it had excellent antibacterial and antioxidant activities. Most importantly, the emulsion showed higher activity, higher resistance to ultraviolet (UV) and a higher temperature than free D-limonene. This research provides a feasible solution for the encapsulation, protection and delivery of essential oils.

Chitosan coated graphene oxide incorporated sodium alginate hydrogel beads for the controlled release of amoxicillin

Biopolymers are crucial in pharmaceuticals, particularly for controlled drug release. In this study, we loaded the broad-spectrum antibacterial drug amoxicillin into sodium alginate, a well-known biopolymer. Graphene oxide was incorporated into the composite, and the hydrogel beads were coated with chitosan for its mucoadhesive properties. Various composites were formulated by adjusting the weight percentage of graphene oxide (GO). The fabricated beads demonstrated controlled and sustained drug release, with 98 % of the loaded drug molecules released over 24 h at gastric pH. The antibacterial test using the disc diffusion technique confirmed the drug release, exhibiting greater effectiveness against the gram-positive bacterium S. aureus than the gram-negative bacterium E. coli. The drug release data were optimized using zero order, first order, Higuchi, and Korsmeyer-Peppas models. The experimental data were best fit to the Korsmeyer-Peppas model with a relatively higher correlation coefficient value. Biocompatibility was evaluated through a cell viability test using mouse fibroblast cell lines (L929). The MTT viability assay confirmed high levels of cytocompatibility, even at higher concentrations (100 μg/mL), with 98.15 % viable cells. These results highlight the potential of the fabricated beads as an effective amoxicillin drug delivery system with biomedical applications.

Bioadhesives with Antimicrobial Properties

Bioadhesives with antimicrobial properties enable easier and safer treatment of wounds as compared to the traditional methods such as suturing and stapling. Composed of natural or synthetic polymers, these bioadhesives seal wounds and facilitate healing while preventing infections through the activity of locally released antimicrobial drugs, nanocomponents, or inherently antimicrobial polers. Although many different materials and strategies are employed to develop antimicrobial bioadhesives, the design of these biomaterials necessitates a prudent approach as achieving all the required properties including optimal adhesive and cohesive properties, biocompatibility, and antimicrobial activity can be challenging. Designing antimicrobial bioadhesives with tunable physical, chemical, and biological properties will shed light on the path for future advancement of bioadhesives with antimicrobial properties. In this review, the requirements and commonly used strategies for developing bioadhesives with antimicrobial properties are discussed. In particular, different methods for their synthesis and their experimental and clinical applications on a variety of organs are reviewed. Advances in the design of bioadhesives with antimicrobial properties will pave the way for a better management of wounds to increase positive clinical outcomes.

Self-Cross-Linkable Chitosan-Alginate Complexes Inspired by Mussel Glue Chemistry

In this study, mussel-inspired chemistry, based on catechol-amine reactions, was adopted to develop self-cross-linkable chitosan-alginate (Chi-Alg) complexes. To do so, the biopolymers were each substituted with ∼20% catechol groups (ChiC and AlgC), and then four complex combinations (Chi-Alg, ChiC-Alg, Chi-AlgC, ChiC-AlgC) were prepared at the surface and in bulk solution. Based on QCM-D and lap shear adhesion tests, the complex with catechol only on Chi (ChiC-Alg) did not show a significant variation from the control complex (Chi-Alg). Conversely, the complexes with catechol on alginate (Chi-AlgC and ChiC-AlgC) rendered a self-cross-linking property and enhanced cohesive properties.

NAD+-associated-hyaluronic acid and poly(L-lysine) polyelectrolyte complexes: An evaluation of their potential for ocular drug delivery

This study details the formation and characterisation of a novel nicotinamide adenine dinucleotide (NAD+)-associated polymeric nanoparticle system. The development of a polyelectrolyte complex (PEC) composed of two natural polyelectrolytes, hyaluronic acid and poly(L-lysine), and an evaluation of its suitability for NAD+ ocular delivery, primarily based on its physicochemical properties and in vitro release profile under physiological ocular flow rates, were of key focus. Following optimisation of formulation method conditions such as complexation pH, mode of addition, and charge ratio, the PEC was successfully formulated under mild formulation conditions via polyelectrolyte complexation. With a size of 235.1 ± 19.0 nm, a PDI value of 0.214 ± 0.140, and a zeta potential value of - 38.0 ± 1.1 mV, the chosen PEC, loaded with 430 µg of NAD+ per mg of PEC, exhibited non-Fickian, sustained release at physiological flowrates of 10.9 ± 0.2 mg of NAD+ over 14 h. PECs containing up to 200 µM of NAD+ did not induce any significant cytotoxic effects on an immortalised human corneal epithelial cell line. Using fluorescent labeling, the NAD+-associated PECs demonstrated retention within the corneal epithelium layer of a porcine model up to 6 h post incubation under physiological conditions. A study of the physicochemical behaviour of the PECs, in terms of size, zeta potential and NAD+ complexation in response to environmental stimuli,highlighted the dynamic nature of the PEC matrix and its dependence on both pH and ionic condition. Considering the successful formation of reproducible NAD+-associated PECs with suitable characteristics for ocular drug delivery via an inexpensive formulation method, they provide a promising platform for NAD+ ocular delivery with a strong potential to improve ocular health.

Complexation between chitosan and carboxymethyl cellulose in weakly acidic, neutral, and weakly alcaline media

The interaction between carboxymethyl cellulose and partially reacetylated chitosan soluble in acidic and alkaline aqueous media is studied by light scattering and isothermal titration calorimetry in a wide pH range. It is shown that the formation of polyelectrolyte complexes (PEC) can occur in the pH range of 6-8, while this pair of polyelectrolytes loses the ability to complexation upon transition to a more alkaline medium. The revealed dependence of the observed enthalpy of interaction on the ionization enthalpy of the buffer indicates the participation of proton transfer from the buffer substance to chitosan and its additional ionization in the binding process. This phenomenon is first observed in a mixture of a weak polybase chitosan and a weak polyacid. The possibility to obtain soluble nonstoichiometric PEC by a direct mixing of the components in a weakly alkaline medium is shown. The resulting PECs are polymolecular particles in shape close to homogeneous spheres with a radius of about 100 nm. The obtained results are promising for creating of biocompatible and biodegradable drug delivery systems.

A Comparison of Interpolyelectrolyte Complexes (IPECs) Made from Anionic Block Copolymer Micelles and PDADMAC or q-Chitosan as Polycation

Block copolymers synthesized via Atom Transfer Radical Polymerization from alkyl acrylate and t-butyl acrylate and the subsequent hydrolysis of the t-butyl acrylate to acrylic acid were systematically varied with respect to their hydrophobic part by the variation in the alkyl chain length and the degree of polymerisation in this block. Depending on the architecture of the hydrophobic part, they had a more or less pronounced tendency to form copolymer micelles in an aqueous solution. They were employed for the preparation of IPECs by mixing the copolymer aggregates with the polycations polydiallyldimethylammonium chloride (PDADMAC) or q-chit. The IPEC structure as a function of the composition was investigated by Static Light and Small Angle Neutron Scattering. For weakly-associated block copolymers (short alkyl chain), complexation with polycation led to the formation of globular complexes, while already existing micelles (long alkyl chain) grew further in mass. In general, aggregates became larger upon the addition of further polycation, but this growth was much more pronounced for PDADMAC compared to q-chit, thereby leading to the formation of clusters of aggregates. Accordingly, the structure of such IPECs with a hydrophobic block depended largely on the type of complexing polyelectrolyte, which allowed for controlling the structural organisation via the molecular architecture of the two oppositely charged polyelectrolytes.

Quantitative Assessment of Interfacial Interactions Governing Ultrafiltration Membrane Fouling by the Mixture of Silica Nanoparticles (SiO2 NPs) and Natural Organic Matter (NOM): Effects of Solution Chemistry

Mixtures of silica nanoparticles (SiO₂ NPs) and natural organic matter (NOM) are ubiquitous in natural aquatic environments and pose risks to organisms. Ultrafiltration (UF) membranes can effectively remove SiO₂ NP-NOM mixtures. However, the corresponding membrane fouling mechanisms, particularly under different solution conditions, have not yet been studied. In this work, the effect of solution chemistry on polyethersulfone (PES) UF membrane fouling caused by a SiO₂ NP-NOM mixture was investigated at different pH levels, ionic strengths, and calcium concentrations. The corresponding membrane fouling mechanisms, i.e., Lifshitz-van der Waals (LW), electrostatic (EL), and acid-base (AB) interactions, were quantitatively evaluated using the extended Derjaguin-Landau-Verwey-Overbeek (xDLVO) theory. It was found that the extent of membrane fouling increased with decreasing pH, increasing ionic strength, and increasing calcium concentration. The attractive AB interaction between the clean/fouled membrane and foulant was the major fouling mechanism in both the initial adhesion and later cohesion stages, while the attractive LW and repulsive EL interactions were less important. The change of fouling potential with solution chemistry was negatively correlated with the calculated interaction energy, indicating that the UF membrane fouling behavior under different solution conditions can be effectively explained and predicted using the xDLVO theory.

Nanochitin and Nanochitosan: Chitin Nanostructure Engineering with Multiscale Properties for Biomedical and Environmental Applications

Nanochitin and nanochitosan (with random-copolymer-based multiscale architectures of glucosamine and N-acetylglucosamine units) have recently attracted immense attention for the development of green, sustainable, and advanced functional materials. Nanochitin and nanochitosan are multiscale materials from small oligomers, rod-shaped nanocrystals, longer nanofibers, to hierarchical assemblies of nanofibers. Various physical properties of chitin and chitosan depend on their molecular- and nanostructures; translational research has utilized them for a wide range of applications (biomedical, industrial, environmental, and so on). Instead of reviewing the entire extensive literature on chitin and chitosan, here, recent developments in multiscale-dependent material properties and their applications are highlighted; immune, medical, reinforcing, adhesive, green electrochemical materials, biological scaffolds, and sustainable food packaging are discussed considering the size, shape, and assembly of chitin nanostructures. In summary, new perspectives for the development of sustainable advanced functional materials based on nanochitin and nanochitosan by understanding and engineering their multiscale properties are described.

Fabrication of Curcumin Diethyl γ-Aminobutyrate-Loaded Chitosan-Coated Magnetic Nanocarriers for Improvement of Cytotoxicity against Breast Cancer Cells

This study shows the effectiveness of magnetic-guide targeting in the delivery of curcumin diethyl γ-aminobutyrate (CUR-2GE), a prodrug of curcumin (CUR) previously synthesized to overcome unfavorable physicochemical properties of CUR. In this study, chitosan (Ch)-coated iron oxide nanoparticles (Ch-IONPs) were fabricated and optimized using Box-Behnken design-based response surface methodology for delivery of CUR-2GE. Ch was used as a coating material on the nanoparticle surface to avoid aggregation. The optimized condition for preparing Ch-IONPs consisted of using 4 mg Ch fabricated at pH 11 under a reaction temperature of 85 °C. The optimized Ch-IONPs were successfully loaded with CUR-2GE with sufficient loading capacity (1.72 ± 0.01%) and encapsulation efficiency (94.9 ± 0.8%). The obtained CUR-2GE-loaded Ch-IONPs (CUR-2GE-Ch-IONPs) exhibited desirable characteristics including a particle size of less than 50 nm based on TEM images, superparamagnetic property, highly crystalline IONP core, sufficient stability, and sustained-release profile. In the presence of permanent magnets, CUR-2GE-Ch-IONPs significantly increased cellular uptake and cytotoxicity toward MDA-MB-231 with a 12-fold increase in potency compared to free CUR-2GE, indicating the potential of magnetic-field assisted delivery of CUR-2GE-Ch-IONPs for the treatment of triple-negative breast cancer.

Histological and Molecular Evidence of the Positive Performance of Glycerol-Plasticized Chitosan-Alginate Membranes on Skin Lesions of Hyperglycemic Mice

The purpose of this study was to investigate tissue repair of excisional wounds in hyperglycemic animals treated with chitosan-alginate membranes (CAM) produced in the presence of glycerol. 8-week C57B1 male mice were divided into normoglycemic animals with a 0.9% saline solution topical treatment (CTSF); hyperglycemic animals with 0.9% saline solution topical treatment (DMSF) and hyperglycemic animals with glycerol-plasticized chitosan-alginate membrane topical treatment (DMCAM). On post-wound day three, the DMCAM group presented a lower number of leukocytes, mature mastocytes, a higher number of vessels (p < 0.05), and active mastocytes (p < 0.05) when compared to the CTSF and DMSF groups. There were no differences regarding the distribution, deposition, organization, and thickness of collagen fibers. On day 7 there were no differences in the analysis of fibroblasts, mastocytes, and TGF−β1 and VEGF expressions among the groups. Regarding collagen fibers, the DMCAM group presented slight red-orange birefringence when compared to the CTSF and DMSF groups. On day 14 there was a slight concentration of thinner elastic fibers for the DMCAM group, with a greater reorganization of papillary skin and improved red-orange birefringence collagen fibers, as well as net-shaped orientation, similar to intact skin. In addition, improved elastic fiber organization distributed in the entire neo-dermis and a larger presence of elaunin fibers were observed, in a similar pattern found in the intact skin. The use of CAM in cutaneous lesions boosted tissue repair since there was a smaller number of inflammatory cells and mastocytes, and an improvement in collagen deposition and collagen fibers. These results demonstrate the high potential of plasticized chitosan-alginate membrane for skin wound dressing of hyperglycemic patients.

Alginate as a Promising Biopolymer in Drug Delivery and Wound Healing: A Review of the State-of-the-Art

Biopolymeric nanoparticulate systems hold favorable carrier properties for active delivery. The enhancement in the research interest in alginate formulations in biomedical and pharmaceutical research, owing to its biodegradable, biocompatible, and bioadhesive characteristics, reiterates its future use as an efficient drug delivery matrix. Alginates, obtained from natural sources, are the colloidal polysaccharide group, which are water-soluble, non-toxic, and non-irritant. These are linear copolymeric blocks of α-(1→4)-linked l-guluronic acid (G) and β-(1→4)-linked d-mannuronic acid (M) residues. Owing to the monosaccharide sequencing and the enzymatically governed reactions, alginates are well-known as an essential bio-polymer group for multifarious biomedical implementations. Additionally, alginate’s bio-adhesive property makes it significant in the pharmaceutical industry. Alginate has shown immense potential in wound healing and drug delivery applications to date because its gel-forming ability maintains the structural resemblance to the extracellular matrices in tissues and can be altered to perform numerous crucial functions. The initial section of this review will deliver a perception of the extraction source and alginate’s remarkable properties. Furthermore, we have aspired to discuss the current literature on alginate utilization as a biopolymeric carrier for drug delivery through numerous administration routes. Finally, the latest investigations on alginate composite utilization in wound healing are addressed.

pH-responsive polyelectrolyte complexation on upconversion nanoparticles: a multifunctional nanocarrier for protection, delivery, and 3D-imaging of therapeutic protein

The delicate tertiary structure of proteins, their susceptibility to heat- and enzyme-induced irreversible denaturation, and their tendency to get accumulated at the cell membrane during uptake are daunting challenges in proteinaceous therapeutic delivery. Herein, a polyelectrolyte complex having encapsulated therapeutic protein has been designed on the surface of upconverting luminescent nanoparticles (NaYF₄:20%Yb³⁺,2%Er³⁺). This nanosized complex system has been found to overcome the challenges of protein aggregation at the cell membrane. It has also defended the cargo from denaturation against (a) enzymatic action of proteinase K and (b) heat (up to 60 °C). Additionally, the nanoparticles at the core of the loaded carrier served as near-infrared (980 nm) responsive probe to accomplish extended-duration 3D imaging during protein delivery. The outer layer of polymer played pivotal role to protect/retrieve the protein structure from denaturation as investigated by circular dichroism studies. Both the masked surface-charges of protein and the nanoscale size of the loaded carrier have facilitated their efficient passage through the cell membrane as observed through 3D images/videos. This nanocarrier is the first of its kind for direct delivery of protein. Thus, the findings can be useful to protect and transport various proteinaceous materials to overcome challenges of accumulation at the cell-membrane and low-temperature storage, as nature does.

Microencapsulation of functional ovalbumin and bovine serum albumin with polylysine-alginate complex for sustained protein vehicle's development

Overcoming harsh gastric environment is still a challenging to bioactive proteins, microencapsulation provides one strategy in designing this protection barrier. In this work, bovine serum albumin and ovalbumin were chosen as model proteins, while polylysine-alginate complex was fabricated for microencapsulation purpose. Both of the protein-loaded microcapsules had regular internal microstructures. The model protein's embedding increased the thermal stability of the microcapsules. Both of the protein-loaded microcapsules had a slow release rate in simulated gastric fluids (pH 3.0), while a sustained release profile in simulated intestinal fluids (pH 6.4), indicating an excellent tolerance to the acidic gastric environment. The microencapsulation process was mild and had no influence on the protein's molecular weight, while a slight peak shifting occurred in the secondary structure of the released proteins. The developed microcapsules could be explored as a kind of vehicle for bioactive proteins applied in functional foods, health care products and medical formulations.

Genipin-crosslinked chitosan/alginate/alumina nanocomposite gels for 3D bioprinting

Immobilizing microorganisms inside 3D printed semi-permeable substrates can be desirable for biotechnological processes since it simplifies product separation and purification, reducing costs, and processing time. To this end, we developed a strategy for synthesizing a feedstock suitable for 3D bioprinting of mechanically rigid and insoluble materials with embedded living bacteria. The processing route is based on a highly particle-filled alumina/chitosan nanocomposite gel which is reinforced by (a) electrostatic interactions with alginate and (b) covalent binding between the chitosan molecules with the mild gelation agent genipin. To analyze network formation and material properties, we characterized the rheological properties and printability of the feedstock gel. Stability measurements showed that the genipin-crosslinked chitosan/alginate/alumina gels did not dissolve in PBS, NaOH, or HCl after 60 days of incubation. Alginate-containing gels also showed less swelling in water than gels without alginate. Furthermore, E. coli bacteria were embedded in the nanocomposites and we analyzed the influence of the individual bioink components as well as of the printing process on bacterial viability. Here, the addition of alginate was necessary to maintain the effective viability of the embedded bacteria, while samples without alginate showed no bacterial viability. The experimental results demonstrate the potential of this approach for producing macroscopic bioactive materials with complex 3D geometries as a platform for novel applications in bioprocessing.

In vitro digestion of sodium alginate/pectin co-encapsulated Lactobacillus bulgaricus and its application in yogurt bilayer beads

The purpose of this study was to prepare sodium alginate (SA)/pectin (PE) hydrogel microspheres using the extrusion method to encapsulate Lactobacillus bulgaricus. Microscopic observation showed that the beads were spherical with a smooth and uniform surface. For microspheres with a diameter range of 140-156 μm, the encapsulation efficiency reached 85.67%. After simulating saliva, gastric juice, and intestinal juice, the activity of the microcapsules was estimated to be 5.78 × 10⁴ log colony forming unit (CFU)/mL. These data show that the use of SA and PE encapsulated probiotics exhibit enhanced viability. In addition, double-layer beads containing probiotic microspheres and yogurt were prepared, and physical and chemical analysis was performed using scanning electron microscopy, Fourier-transform infrared spectroscopy, and differential scanning calorimetry. Texture and sensory property analysis revealed that the beads had good elasticity, chewiness, and high commercial value. Collectively, these findings indicate that SA and PE can be used for the encapsulation, protection, and gastrointestinal delivery of probiotics. Moreover, these microcapsules exhibit good stability in vitro and improve yogurt characteristics by increasing the survival rate of encapsulated probiotics, thus demonstrating their commercial application potential.

New insights into physicochemical aspects involved in the formation of polyelectrolyte complexes based on chitosan and dextran sulfate

Polyelectrolyte complexation is a technique based on interactions between polyelectrolytes of opposite charges driven by supramolecular interactions. Although many studies address the formation of polyelectrolyte complexes (PECs), few explore strategies and tools to select the best working conditions and are often based on empirical choices. This study evaluates the influence of pH, molecular weight, and polymeric proportion on the formation of PECs based on chitosan:dextran sulfate. In addition, it assesses the approaches that study the influence of pH on the zeta potential of polymeric dispersions as a tool in the design of PECs. Results showed that nanoparticles with an excess of polycation formed aggregates, while an excess of dextran sulfate reduced the size of the particles. The graph of zeta potential as a function of pH proved to be a promising tool in the choice of polymers and a better pH condition in the development of PECs.

The preparation, characterization and catalytic activity of Ni NPs supported on porous alginate-g-poly(p-styrene sulfonamide-co-acrylamide)

Herein, we report the synthesis of nickel nanoparticles under mild conditions using porous alginate-g-poly(p-styrene sulfonamide-co-acrylamide) as a protecting/stabilizing agent and sodium borohydride as a reducing agent. The porous cross-linked polymeric support was prepared via combining the use of sol-gel, nanocasting, and crosslinking techniques, in which the p-styrene sulfonamide monomer (PSSA) and N,N'-methylene-bis (acrylamide) (MBA) cross-linker underwent copolymerization on the surface of sodium alginate in the presence of a SiO2 nanoparticle (NP) template (Alg-PSSA-co-ACA). The prepared catalyst (Alg-PSSA-co-ACA@Ni) showed high catalytic activity for the one-step synthesis of 1,3,4-oxadiazoles from the reaction of hydrazides and aryl iodides through isocyanide insertion/cyclization.

Chitosan alginate nanoparticles as a platform for the treatment of diabetic and non-diabetic pressure ulcers: Formulation and in vitro/in vivo evaluation

Chitosan and alginate are natural bioactive polymers with wound healing properties, in addition to chitosan's anti-bacterial properties. In this study, these two polymers were combined in a drug-free nanosystem with positive or negative surface charges, for the treatment of non-diabetic and diabetic pressure ulcers. Chitosan alginate nanoparticles (CA NPs) were prepared by a modified ionic gelation method. Interaction between the polymers and formation of the NPs were confirmed by Fourier-Transform infrared spectroscopy, differential scanning calorimetry and transmission electron microscopy. For in vivo study, selected CA NPs with optimum particle size, polydispersity index, positive and negative zeta potential, were evaluated for their pressure ulcers-healing effect using non-diabetic and diabetic rats. Rate of wound closure, histological examination and histomorphometric assessment were used to evaluate the CA NPs' wound healing potential. Positively and negatively charged CA NPs significantly enhanced wound closure rates, compared to control untreated group. Histological and histomorphometric analysis revealed higher quality and maturation of the formed granulation tissue, less inflammation and higher collagen content with positively charged CA NPs containing higher amount of chitosan. These results suggest that chitosan alginate nanoparticles offer a promising platform for diabetic and non-diabetic wound healing applications.

Fundamental and Practical Aspects in the Formulation of Colloidal Polyelectrolyte Complexes of Chitosan and siRNA

The formation of electrostatic interactions between polyanionic siRNA and polycations gives an easy access to the formation of colloidal particles capable of delivering siRNA in vitro or in vivo. Among the polycations used for siRNA delivery, chitosan occupies a special place due to its unique physicochemical and biological properties. In this chapter we describe the fundamental and practical aspects of the formation of colloidal complexes between chitosan and siRNA. The basis of the electrostatic complexation between oppositely charged polyelectrolytes is first introduced with a focus on the specific conditions to obtain stable colloid complex particles. Subsequent, the properties that make chitosan so special are described. In a third part, the main parameters influencing the colloidal properties and stability of siRNA/chitosan complexes are reviewed with emphasis on some practical aspects to consider in the preparation of complexes.

Low-energy electron beam sterilization of solid alginate and chitosan, and their polyelectrolyte complexes

Polysaccharidic scaffolds hold great hope in regenerative medicine, however their sterilization still remains challenging since conventional methods are deleterious. Recently, electron beams (EB) have raised interest as emerging sterilization techniques. In this context, the aim of this work was to study the impact of EB irradiations on polysaccharidic macroporous scaffolds. The effects of continuous and pulsed low energy EB were examined on polysaccharidic or on polyelectrolyte complexes (PEC) scaffolds by SEC-MALLS, FTIR and EPR. Then the scaffolds' physicochemical properties: swelling, architecture and compressive modulus were investigated. Finally, sterility and in vitro biocompatibility of irradiated scaffolds were evaluated to validate the effectiveness of our approach. Continuous beam irradiations appear less deleterious on alginate and chitosan chains, but the use of a pulsed beam limits the time of irradiation and better preserve the architecture of PEC scaffolds. This work paves the way for low energy EB tailor-made sterilization of sensitive porous scaffolds.

Designing biopolymer-based artificial peroxidase for oxidative removal of dibenzothiophene from a model diesel fuel

Naturally occurring peroxidases are important for living organisms and have manifold utility in industries. However, lack of stability in harsh reaction conditions hinders wide applicability of such enzymes. Thus, suitable alternative is vital which can endure severe reaction conditions. As a substitute of natural peroxidase, herein, biopolymer-based polyelectrolyte complexes (PECs) coordinated with Feⁿ⁺ is proposed as macromolecular peroxidase mimicking systems. Three PECs were engineered via complexation of protonated chitosan and alginate with Fe²⁺ (Fe²⁺-PEC), Fe³⁺ (Fe³⁺-PEC), and Fe₃O₄ (Fe₃O₄-PEC), respectively. Computational study showed the Fe³⁺-PEC was highly stable with abundant electrostatic and intramolecular hydrogen bonding interactions. The versatility of the Fe-PECs as artificial peroxidase biocatalysts was probed by two types of peroxidase assays - ABTS oxidation in buffer systems (pH 4.0 and 7.0) and pyrogallol oxidation in organic solvents (acetonitrile, ethyl acetate and toluene). Overall, Fe³⁺-PEC showed remarkably high peroxidase activity both in aqueous buffers and in organic solvents, whereas, Fe₃O₄-PEC showed least catalytic activity. Finally, as a proof of concept, the ability of the biocatalyst to carry out deep oxidative desulphurization was demonstrated envisaging removal of dibenzothiophene from model fossil fuel in a sustainable way.

Water-soluble poly(ethylene glycol) methyl ether-grafted chitosan/alginate polyelectrolyte complex hydrogels

This study aimed to fabricate polyelectrolyte complexes from water-soluble poly(ethylene glycol) methyl ether-grafted chitosan (mPEG-g-CTS) and alginate (ALG) in the absence of acetic acid. The complexes formed fibrous network macrogels when mPEG-g-CTS with short mPEG chains (mPEG750-g-CTS and mPEG2000-g-CTS) and mPEG-g-CTS:ALG weight ratios in the range from 1:0.14 to 1:1 were used. The macrogels at a weight ratio of mPEG-g-CTS:ALG of 1:1 possessed the highest elasticity with electrophoretic mobility close to 0 m²·V^-1·s^-1. Water uptake of the sponge-like lyophilized macrogels decreased with increasing ALG content, mPEG chain length, and degree of substitution of mPEG-g-CTS. In contrast, the polyelectrolyte complexes prepared using long mPEG chains of mPEG-g-CTS (mPEG5000-g-CTS) formed spherical nanoparticles (70-90 nm) and showed highly negative electrophoretic mobility (< -3.20 × 10⁸ m²·V^-1·s^-1). The obtained mPEG-g-CTS/ALG polyelectrolyte complex hydrogels and nanoparticles have the potential to be applied as carriers for functional food additives, drugs, and bioactive compounds.

Ions-induced gelation of alginate: Mechanisms and applications

Alginate is an important natural biopolymer and has been widely used in the food, biomedical, and chemical industries. Ca²⁺-induced gelation is one of the most important functional properties of alginate. The gelation mechanism is well-known as egg-box model, which has been intensively studied in the last five decades. Alginate also forms gels with many other monovalent, divalent or trivalent cations, and their gelation can possess different mechanisms from that of Ca²⁺-induced gelation. The resulted gels also exhibit different properties that lead to various applications. This study is proposed to summarize the gelation mechanisms of alginate induced by different cations, mainly including H⁺, Ca²⁺, Ba²⁺, Cu²⁺, Sr²⁺, Zn²⁺, Fe²⁺, Mn²⁺, Al³⁺, and Fe³⁺. The mechanism of H⁺-induced gelation of alginate mainly depends on the protonation of carboxyl groups. Divalent ions-induced gelation of alginate show different selection towards G, M, and GM blocks. Trivalent ions can bind to carboxyl groups of uronates with no selection. The properties and applications of these ionotropic alginate gels are also discussed. The knowledge gained in this study would provide useful information for the practical applications of alginate.