Fabrication, properties and bioapplications of cellulose/collagen hydrolysate composite films

Fabrication of a modified bacterial cellulose with different alkyl chains and its prevention of abdominal adhesion

Abdominal hernia mesh is a common product which is used for prevention of abdominal adhesion and repairing abdominal wall defect. Currently, designing and preparing a novel bio-mesh material with prevention of adhesion, promoting repair and good biocompatibility simultaneously remain a great bottleneck. In this study, a novel siloxane-modified bacterial cellulose (BC) was designed and fabricated by chemical vapor deposition silylation, then the effects of different alkyl chains length of siloxane on surface properties and cell behaviors were explored. The effect of preventing of abdominal adhesion and repairing abdominal wall defect in rats with the siloxane-modified BC was evaluated. As the grafted alkyl chains become longer, the surface of the siloxane-modified BC can be transformed from super hydrophilic to hydrophobic. In vivo results showed that BC-C16 had good long-term anti-adhesion effect, good tissue adaptability and histocompatibility, which is expected to be used as a new anti-adhesion hernia repair material in clinic.

Influence of preparation techniques of cellulose II nanocrystals as reinforcement for tannery solid waste-based gelatin composite films

Tannery waste-based gelatin composite film reinforced with cellulose II nanocrystal (CNC II) extracted from wet wipes using three different hydrolysis techniques is explored for its functional properties and possible utilization as a biodegradable packaging material. CNC II isolated using hydrogen peroxide (PCNC), citric acid (CCNC), and hydrochloric acid (HCNC) differed in morphological and crystalline character as investigated using DLS, FE-SEM, FTIR, and XRD analysis. The crystallinity of PCNC, CCNC, and HCNC was found to be 81.1%, 75.4%, and 86.1%, respectively. The highly crystalline CNC II (PCNC) incorporation improved mechanical stiffness of rawhide trimming waste-based gelatin films by 50% compared to control gelatin film. Maximum thermal decomposition with Tmax of 329 °C was obtained for gelatin films with PCNC nano-reinforcement. Films with CNC II were structurally stable and sufficiently antibacterial against Gram-positive S. aureus microbial strain. Strong interfacial non-covalent and hydrogen bonding interactions between gelatin and cellulose II nanocrystal have likely enhanced the properties of the composite films. Incorporation of CNC II reduced the surface wettability of the films and nanocomposites absorbed UV radiation as evidenced by transmittance value T280 of 0.19%. Nanocomposite films degraded up to 79.9% of initial mass within 7 days of soil burial. Furthermore, based on the optimized system, single-use packaging application of eggplant seeds has been demonstrated.

Molecular and thermodynamic insights into interfacial interactions between collagen and cellulose investigated by molecular dynamics simulation and umbrella sampling

Cellulose/collagen composites have been widely used in biomedicine and tissue engineering. Interfacial interactions are crucial in determining the final properties of cellulose/collagen composite. Molecular dynamics simulations were carried out to gain insights into the interactions between cellulose and collagen. It has been found that the structure of collagen remained intact during adsorption. The results derived from umbrella sampling showed that (110) and ([Formula: see text]) faces exhibited the strongest affinity with collagen (100) face came the second and (010) the last, which could be attributed to the surface roughness and hydrogen-bonding linkers involved water molecules. Cellulose planes with flat surfaces and the capability to form hydrogen-bonding linkers produce stronger affinity with collagen. The occupancy of hydrogen bonds formed between cellulose and collagen was low and not significantly contributive to the binding affinity. These findings provided insights into the interactions between cellulose and collagen at the molecular level, which may guide the design and fabrication of cellulose/collagen composites.

Synthesis of Antibacterial Hybrid Hydroxyapatite/Collagen/Polysaccharide Bioactive Membranes and Their Effect on Osteoblast Culture

Inspired by the composition and confined environment provided by collagen fibrils during bone formation, this study aimed to compare two different strategies to synthesize bioactive hybrid membranes and to assess the role the organic matrix plays as physical confinement during mineral phase deposition. The hybrid membranes were prepared by (1) incorporating calcium phosphate in a biopolymeric membrane for in situ hydroxyapatite (HAp) precipitation in the interstices of the biopolymeric membrane as a confined environment (Methodology 1) or (2) adding synthetic HAp nanoparticles (SHAp) to the freshly prepared biopolymeric membrane (Methodology 2). The biopolymeric membranes were based on hydrolyzed collagen (HC) and chitosan (Cht) or κ-carrageenan (κ-carr). The hybrid membranes presented homogeneous and continuous dispersion of the mineral particles embedded in the biopolymeric membrane interstices and enhanced mechanical properties. The importance of the confined spaces in biomineralization was confirmed by controlled biomimetic HAp precipitation via Methodology 1. HAp precipitation after immersion in simulated body fluid attested that the hybrid membranes were bioactive. Hybrid membranes containing Cht were not toxic to the osteoblasts. Hybrid membranes added with silver nanoparticles (AgNPs) displayed antibacterial action against different clinically important pathogenic microorganisms. Overall, these results open simple and promising pathways to develop a new generation of bioactive hybrid membranes with controllable degradation rates and antimicrobial properties.

Improving the mechanical properties and thermal stability of sodium alginate/hydrolyzed collagen films through the incorporation of SiO2

Biopolymer-based films have become leading alternatives to traditional fossil-based packaging plastics. Among the countless types of biopolymers with potential for such applications, films containing hydrolyzed collagen in their composition were scarcely explored. This study determined the effect of different loads of nano-SiO₂ (0, 2, 6, 8 and 10% w/w of sodium alginate) in the sodium alginate (SA) and hydrolyzed collagen (HC) blend films in terms of structure, thickness, mechanical properties, and thermal stability. The results indicated an improvement in the general mechanical and thermal behavior. Tensile strength increased from 18.2 MPa (control sample) to 25.4 MPa for the SA/HC film incorporated with 10% nano-SiO₂. In the same condition, the film's elongation at break improved impressively (from 19.5 to 35.8%). Thermal stability improved slightly for all proportions of nano-SiO₂. Therefore, the addition of nano-SiO₂ can be an easy and simple strategy to improve crucial properties of SA/HC blend films, increasing its performance for future application as sustainable packaging.

Approaches in Animal Proteins and Natural Polysaccharides Application for Food Packaging: Edible Film Production and Quality Estimation

Natural biopolymers are an interesting resource for edible films production, as they are environmentally friendly packaging materials. The possibilities of the application of main animal proteins and natural polysaccharides are considered in the review, including the sources, structure, and limitations of usage. The main ways for overcoming the limitations caused by the physico-chemical properties of biopolymers are also discussed, including composites approaches, plasticizers, and the addition of crosslinking agents. Approaches for the production of biopolymer-based films and coatings are classified according to wet and dried processes and considered depending on biopolymer types. The methods for mechanical, physico-chemical, hydration, and uniformity estimation of edible films are reviewed.

Preparation and Properties of Microcrystalline Cellulose/Fish Gelatin Composite Film

As a natural macromolecule-based biomaterial, fish gelatin is used in medical materials for its low pathogen infection risk. However, because of poor mechanical properties, its application has been limited. In this study, microcrystalline cellulose-reinforced fish gelatin (FG/MCC) composite films were prepared with a biological cross-linking agent (genipin) under ultrasonic treatment. SEM micrographs showed that the smooth microstructure of FG film became increasingly disordered with the addition of MCC. The infrared spectrum analysis (FTIR) demonstrated the existence of hydrogen bond interaction between MCC and FG. Compared with the pure FG film, the tensile strength (TS) and modulus of elasticity (MOE) of composite films with MCC were improved, and the elongation at break (EAB) and swelling ratios (SR) were decreased. Ultrasonic treatment could further improve TS, MOE, and SR. When the composite film was prepared with 15% MCC and treated with ultrasound, the TS and MOE increased by 115% and 227%, respectively, while the EAB decreased by 35% and the SR decreased by 4% in comparison with pure FG films. Thermo-gravimetric analysis (TGA) showed that the FG/MCC composite films were stable below 100 °C. The above results indicate that the FG/MCC films have optimistic application prospects in the biomedical field.

Cellulose/Collagen Dressings for Diabetic Foot Ulcer: A Review

Diabetic foot ulcer (DFU) is currently a global concern and it requires urgent attention, as the cost allocation by the government for DFU increases every year. This review was performed to provide scientific evidence on the advanced biomaterials that can be utilised as a first-line treatment for DFU patients. Cellulose/collagen dressings have a biological property on non-healing wounds, such as DFU. This review aims to analyse scientific-based evidence of cellulose/collagen dressing for DFU. It has been proven that the healing rate of cellulose/collagen dressing for DFU patients demonstrated a significant improvement in wound closure as compared to current standard or conventional dressings. It has been scientifically proven that cellulose/collagen dressing provides a positive effect on non-healing DFU. There is a high tendency for cellulose/collagen dressing to be used, as it highly promotes angiogenesis with a rapid re-epithelisation rate that has been proven effective in clinical trials.

Development and Performance of Bioactive Compounds-Loaded Cellulose/Collagen/Polyurethane Materials

Here we present a new biomaterial based on cellulose, collagen and polyurethane, obtained by dissolving in butyl imidazole chloride. This material served as a matrix for the incorporation of tannin and lipoic acid, as well as bioactive substances with antioxidant properties. The introduction of these bioactive principles into the base matrix led to an increase of the compressive strength in the range 105-139 kPa. An increase of 29.85% of the mucoadhesiveness of the film containing tannin, as compared to the reference, prolongs the bioavailability of the active substance; a fact also demonstrated by the controlled release studies. The presence of bioactive principles, as well as tannins and lipoic acid, gives biomaterials an antioxidant capacity on average 40%-50% higher compared to the base matrix. The results of the tests of the mechanical resistance, mucoadhesiveness, bioadhesiveness, water absorption and antioxidant capacity of active principles recommend these biomaterials for the manufacture of cosmetic masks or patches.

Ferulic acid-loaded collagen hydrolysate and polycaprolactone nanofibres for tissue engineering applications

There is a great need for the progress of composite biomaterials, which are effective for tissue engineering applications. In this work, the development of composite electrospun nanofibres based on polycaprolactone (PCL) and collagen hydrolysate (CH) loaded with ferulic acid (FA) for the treatment of chronic wounds. Response Surface Methodology (RSM) has been applied to nanofibres factor manufacturing assisted by electrospinning. For wound healing applications, the authors have created the efficacy of CH, and PCL membranes can act as a stable, protective cover for wound, enabling continuous FA release. The findings of the RSM showed a reasonably good fit with a polynomial equation of the second order which was statistically acceptable at P < 0.05. The optimised parameters include the quantity of hydrolysate collagen, the voltage applied and the distance from tip-to-collector. Based on the Box-Behnken design, the RSM was used to create a mathematical model and optimise nanofibres with minimum diameter production conditions. Using FTIR, TGA and SEM, optimised nanofibres were defined. In vitro, cytocompatibility trials showed that there was an important cytocompatibility of the optimised nanofibres, which was proved by cell proliferation and cell morphology. In this research, the mixed nanofibres of PCL and CH with ferulic could be a potential biomaterial for wound healing.

A 3D porous microsphere with multistage structure and component based on bacterial cellulose and collagen for bone tissue engineering

Collagen (COL) and bacterial cellulose (BC) were chemically recombined by Malaprade and Schiff-base reactions. A three-dimensional (3D) porous microsphere of COL/BC/Bone morphogenetic protein 2 (BMP-2) with multistage structure and components were prepared by the template method combined with reverse-phase suspension regeneration. The microspheres were full of pores and had a rough surface. The particle size ranged from 8 to 12 microns, the specific surface area (S_BET) was 123.4 m²/g, the pore volume (V_Pore) was 0.59 cm³/g, and the average pore diameter (D_BJH) was 198.5 nm. The adsorption isotherm of the microspheres on the N₂ molecule belongs to that of mesoporous materials. The microspheres showed good biocompatibility, and the 3D porous microspheres with multiple structures and components effectively promoted the adhesion, proliferation, and osteogenic differentiation of mice MC3T3-E1 cells. The study can provide a theoretical basis for the application of COL/BC porous microspheres in the field of bone tissue engineering.

Hydrolyzed Collagen-Sources and Applications

Hydrolyzed collagen (HC) is a group of peptides with low molecular weight (3-6 KDa) that can be obtained by enzymatic action in acid or alkaline media at a specific incubation temperature. HC can be extracted from different sources such as bovine or porcine. These sources have presented health limitations in the last years. Recently research has shown good properties of the HC found in skin, scale, and bones from marine sources. Type and source of extraction are the main factors that affect HC properties, such as molecular weight of the peptide chain, solubility, and functional activity. HC is widely used in several industries including food, pharmaceutical, cosmetic, biomedical, and leather industries. The present review presents the different types of HC, sources of extraction, and their applications as a biomaterial.

Preparation and characterization of homogeneous and enhanced casein protein-based composite films via incorporating cellulose microgel

Gelatin-coupled cellulose (GCC) microgel with whisker-like structure is prepared and used to incorporate into casein (CA) matrix to construct reinforced CA-based composite films by solution casting. The GCC microgel has excellent dispersibility and stability in water, which contributes to the hydrophobicity and significantly reduces the moisture absorption of the composite films, as well as a decrease in the water vapor permeability with an increase of GCC content at different relative humidity is also observed. Compared with pure casein material, the resultant CA-based composite films show more homogeneous and dense cross-sectional structure, and the cleavage temperature of the hydrogen bonds increases by 16 °C. In particular, their tensile strength and Young’s modulus increase by 6 and 3.5 times, respectively. These indicators are superior to that of the nanoparticle enhanced CA-based composite film. Moreover, the light transmittance of the CA-based films at 550 nm is about 88% when GCC content is higher than 9%. The above results could be attributed to the strong hydrogen bonds formed between GCC components and CA matrix, as further confirmed by fourier transform infrared spectra and X-ray diffraction analysis.

Film-forming ability of collagen hydrolysate extracted from leather solid wastes with chitosan

Discharges of huge quantities of leather solid wastes by leather industries and the increased use of synthetic packaging films have raised serious concerns on account of their environmental impacts. The paper focuses on the development and characterization of potential environmentally friendly composite films using collagen hydrolysate (CH) extracted from leather solid wastes and chitosan (C) to assess the feasibility of producing polymeric materials suitable for applications in packaging and wrapping purposes. Solid collagen-based protein hydrolysate was extracted from chromium-tanned leather wastes and analyzed to determine its chemical properties. With the goal of improving the physico-chemical performance of CH, three types of composite films (CH75/C25, CH50/C50, CH25/C75) were prepared with increasing concentrations of C, and some of their physical and functional properties were characterized. The results indicated that the addition of C caused increase (p < 0.05) in the thickness, tensile strength (TS), elasticity modulus (EM), and water vapor permeability (WVP), leading to stronger films as compared with CH film, but significantly (p < 0.05) decreased the elongation at break (EAB) and solubility of films (p < 0.05). The light barrier measurements present low values of transparency at 600 nm of the CH/C films, indicating that the films are very transparent and they have excellent barrier properties against UV light. The structural properties investigated by FTIR and DSC showed total miscibility between both polymers. Scanning electron micrographs revealed that CH/C composite films showed a compact homogeneous structure. These results demonstrate the potential application of CH/C composite films in packaging industry.

A novel microporous oxidized bacterial cellulose/arginine composite and its effect on behavior of fibroblast/endothelial cell

The bacterial cellulose (BC) has been reported widely. Although there are many methods to modify BC, such as the oxidized BC, which is biodegradable and can be used as wound dressing. However, the nanostructure of BC makes it difficult to be oxidized. Importantly, high oxidation degree makes the content of aldehyde high, which make the cell biocompatibility poor. Herein, we fabricated a novel bio-composite based on microporous oxidized BC (MOBC) and in-situ grafted with Arg. The micropores can increase the contact area between BC and oxidizing agent and the reaction between MOBC and Arg, which will enhance the biocompatibility. The roughness and surface energy of MOBC/68.68%Arg are 1.5 and 1.16 times than that of BC respectively. We applied a microfluidic chip to evaluate the cell migration. Comparing with BC, MOBC/Arg promoted proliferation, migration and expression of Collagen-I of fibroblasts and endothelial cells. It prospects the MOBC/Arg can be used as wound dressing.

Microenvironmental changes in collagen/polyvinyl alcohol blends in the presence of ionic liquid: A spectroscopic analysis

This study describes the microenvironmental changes due to various non-covalent interactions occurring in collagen/polyvinyl alcohol blends in the presence of ionic liquid, 1-butyl-3-methylimidazolium chloride, using spectroscopic techniques. These non-covalent interactions alter the hydration network of collagen. Electronic spectral analysis of collagen/polyvinyl alcohol/ionic liquid blends exhibited movement of tyrosine amino acid from the hydrophilic to hydrophobic core of collagen. Conformational studies investigating the influence of 1-butyl-3-methylimidazolium chloride on the intramolecular H-bonds revealed increased helicity packing and reorientation of H-bonds. This signifies that 1-butyl-3-methylimidazolium chloride is likely to be involved in reorienting the hydration dynamics of collagen, namely, by altering the existing and promoting formation of new intramolecular H-bonds between collagen and polyvinyl alcohol. Surface morphology of collagen/polyvinyl alcohol/ionic liquid blends revealed porous matrix, indicating 1-butyl-3-methylimidazolium chloride could act as a pore generator. This phenomenon can be employed for developing novel biomaterials with tunable porosity.

Sol-gel assisted fabrication of collagen hydrolysate composite scaffold: a novel therapeutic alternative to the traditional collagen scaffold

Collagen is one of the most widely used biomaterial for various biomedical applications. In this Research Article, we present a novel approach of using collagen hydrolysate, smaller fragments of collagen, as an alternative to traditionally used collagen scaffold. Collagen hydrolysate composite scaffold (CHCS) was fabricated with sol-gel transition procedure using tetraethoxysilane as the silica precursor. CHCS exhibits porous morphology with pore sizes varying between 380 and 780 μm. Incorporation of silica conferred CHCS with controlled biodegradation and better water uptake capacity. Notably, 3T3 fibroblast proliferation was seen to be significantly better under CHCS treatment when compared to treatment with collagen scaffold. Additionally, CHCS showed excellent antimicrobial activity against the wound pathogens Staphylococcus aureus, Bacillus subtilis, and Escherichia coli due to the inherited antimicrobial activity of collagen hydrolysate. In vivo wound healing experiments with full thickness excision wounds in rat model demonstrated that wounds treated with CHCS showed accelerated healing when compared to wounds treated with collagen scaffold. These findings indicate that the CHCS scaffold from collagen fragments would be an effective and affordable alternative to the traditionally used collagen structural biomaterials.

Interactions between carboxymethyl konjac glucomannan and soy protein isolate in blended films

To elucidate biopolymer interactions between carboxymethyl konjac glucomannan (CMKGM) and soy protein isolate (SPI) in different ratios on physicochemical properties of the blended films, biodegradable CMKGM/SPI films were prepared and characterized. The results showed that CMKGM and SPI are highly compatible in blended film formation, and that Maillard reactions and hydrogen bonds interactions between CMKGM and SPI occurred. The water adsorption of the CMKGM/SPI films progressively decreased with increasing CMKGM level, the surface wettability of the blended films was improved with increasing CMKGM content; the CMKGM/SPI blend films had enhanced tensile strength (TS) and elongation at break (EAB) compared to pure CMKGM and SPI films; the oxygen permeability of blend films was decreased; the roughness was decreased with increasing CMKGM content. Moreover, the CMKGM/SPI film was biocompatible and biodegradable.