Sorption of carbamazepine from water by magnetic molecularly imprinted polymers based on chitosan-Fe3O4

Advanced technologies in water treatment: Chitosan and its modifications as effective agents in the adsorption of contaminants

Chitosan, derived from the abundant biopolymer chitin, has emerged as a promising option for water treatment due to its intrinsic bioavailability. This review emphasizes the notable characteristics of chitosan, which allow for various modifications, expanding its applications. The polymer's effectiveness in adsorbing contaminants, particularly in advanced water treatment technologies, is highlighted. The review underscores the potential of chitosan-based hybrid materials, including nanocomposites, hydrogels, membranes, films, sponges, nanoparticles, microspheres, and flakes, as innovative alternatives to traditional chemical-based adsorbents. The advantages of using these materials in wastewater treatment, especially in removing heavy metals, dyes, and emerging compounds, are explored. The study delves into the mechanisms involved in wastewater treatment with chitosan, emphasizing the interactions between the polymer and various contaminants. Additionally, the application of chitosan as a contaminant removal agent in a post-pandemic context is addressed, considering the challenges related to waste management and environmental preservation. The analysis highlights the potential contribution of chitosan in mitigating environmental impacts post-pandemic, offering practical solutions for treating contaminated effluents and promoting sustainability. The study addresses current obstacles and prospects for chitosan-based wastewater treatment, emphasizing its promising role in sustainable water management.

Biodegradation behaviour of pharmaceutical compounds and selected metabolites in activated sludge. A forecasting decision system approach

Society's support upon chemicals over the last few decades has led to their increased production, application and discharge into the environment. Wastewater treatment plants (WWTPs) contain a multitude of these chemicals such us; pharmaceutical compounds (PCs). Often, their biodegradability by activated sludge microorganisms is significant for their elimination during wastewater treatment. In this paper the focus is laid on two PCs carbamazepine (CBZ) and diclofenac (DCF) and their main transformation products (TPs). Laboratory degradation tests with these two pharmaceuticals using activated sludge as inoculum under aerobic conditions were performed and microbial metabolites were analyzed by liquid chromatography-mass spectrometry (LC/MS-MS). In two different Mixed liquid Suspended Solids (MLSS) concentrations the biodegradability by activated sludge of CBZ and DCF were evaluated. Also, this article proposes a decision support system to optimize the prediction process of this type of pharmacological compounds. A study and analysis of the techniques of Support Vector Machine, Random Forest, Decision Trees and Multilayer Perceptron Network is carried out to select the most reliable and accurate predictor for the decision system. There are not significant differences in the removal of DCF with 30 mg MLSS/L and 60 mg MLSS/L. DCF was better removed than CBZ in all experiments studied. The TP detected in the samples were mainly 4-OH-DCF for DCF and 10, 11 EPOXICBZ for CBZ. The results show that the best models are obtained with Random Forest and Multilayer Perceptron Network techniques, with a model fit of more than 95% for both carbamazepine and diclofenac metabolites. Obtaining a root means square errors of 0.80 µg/L for the metabolite 4-OH-DCF for DCF with the technique Random Forest and a root means square errors of 1.13 µg/L for the metabolite 10, 11 EPOXICBZ for CBZ with the Multilayer Perceptron Network technique.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-023-00890-x.

Sustainable development and analysis of a novel bio-derived (biochar) nanocomposite for the remediation of carbamazepine from aqueous solution

The presence of pharmaceutical compounds in aqueous environments has become a growing concern due to their potential adverse effects on ecosystems and human health. In this work, synthesis of a novel bio based nanocomposite using a biowaste, palm seed is employed for the preparation of biochar. The bio derived nanocomposite consist of polypyrrole (Ppy), graphene oxide (GO), and biochar, is employed for the Carbamazepine (CBZ) removal. The synthesized nanocomposite, Ppy-GO-Biochar, is characterized using various analytical techniques. The characterization results confirmed the successful synthesis of the Ppy-GO-Biochar nanocomposite with the desired morphology and structural properties. The effect of variables is investigated and the optimum conditions are found as: pH (7.8), adsorbent dosage (1.4 g/L), agitation speed (200 rpm) and temperature (39.5 °C). The results demonstrated that a removal efficiency of over 97.74% and uptake of 45.045 mg/g is achieved for CBZ. Furthermore, the CBZ removal followed pseudo-second-order, indicating chemisorption as the predominant mechanism. The CBZ sorption equilibrium is well represented by Langmuir and Freundlich isotherm. Thermodynamic results show that CBZ sorption is endothermic and spontaneous. Mechanism of CBZ sorption using the synthesized nanocomposite follows π-π interaction and electrostatic attraction. Molecular docking studies were also performed for the sorption of CBZ.

Synthesis, Characterization, and Evaluation of a Novel Molecularly Imprinted Polymer (MIP) for Selective Quantification of Curcumin in Real Food Sample by UV-Vis Spectrophotometry

Curcumin is the main colorant of the curcuma longa plant, a food with many benefits for human health. This work aims to synthesize a novel molecularly imprinted polymer (MIP) for the selective detection of curcumin in real samples obtained from the local market of Peru. MIPs were synthesized via bulk polymerization using curcumin, acrylamide, ethylene glycol dimethacrylate, ABCV, and acetonitrile. FTIR spectra showed equal spectra for MIP and NIP. N2 physisorption analysis presented a higher value BET surface for the MIP (28.5 m2 g-1) compared to the NIP (18.5 m2 g-1). The adsorption capacity of the MIP was evaluated using UV-vis spectrophotometry in the band around 430 nm. The adsorption kinetics found were of pseudo-second-order and a Qe value of 16.2 mg g-1. Furthermore, the adsorption process resembles the Freundlich adsorption model with a heterogeneity factor of less than 1 (0.61) and Kf greater for MIP (1.97). The selectivity test indicated that MIP is more selective for curcumin (Q = 13.20 mg g-1) than against interferents (Q = 2.19 mg g-1). The specific selectivity factor (S) obtained for the interferents was greater than 1 which indicates a good selectivity. Finally, the application of MIP in real samples using UV-vis spectrophotometry yielded a recovery value greater than 70%.

Developments and application of chitosan-based adsorbents for wastewater treatments

Water quality is deteriorating continuously as increasing levels of toxic inorganic and organic contaminants mostly discharging into the aquatic environment. Removal of such pollutants from the water system is an emerging research area. During the past few years use of biodegradable and biocompatible natural additives has attracted considerable attention to alleviate pollutants from wastewater. The chitosan and its composites emerged as a promising adsorbents due to their low price, abundance, amino, and hydroxyl groups, as well as their potential to remove various toxins from wastewater. However, a few challenges associated with its practical use include lack of selectivity, low mechanical strength, and solubility in acidic medium. Therefore, several approaches for modification have been explored to improve the physicochemical properties of chitosan for wastewater treatment. Chitosan nanocomposites found effective for the removal of metals, pharmaceuticals, pesticides, microplastics from the wastewaters. Nanoparticle doped with chitosan in the form of nano-biocomposites has recently gained much attention and proven a successful tool for water purification. Hence, applying chitosan-based adsorbents with numerous modifications is a cutting-edge approach to eliminating toxic pollutants from aquatic systems with the global aim of making potable water available worldwide. This review presents an overview of distinct materials and methods for developing novel chitosan-based nanocomposites for wastewater treatment.

The use of chitosan-based composites for environmental remediation: A review

The presence of hazardous pollutants in water sources as a result of industrial activities is a major environmental challenge that impedes the availability of safe drinking water. Adsorptive and photocatalytic degradative removal of various pollutants in wastewater have been recognized as cost-effective and energy-efficient strategies. In addition to its biological activity, chitosan and its derivatives are considered as promising materials for the removal of various pollutants. The abundance of hydroxyl and amino groups in the chitosan macromolecular structure results in a variety of concurrent pollutant's adsorption mechanisms. Furthermore, adding chitosan to photocatalysts increases the mass transfer while decreasing both the band gap energy and the amount of intermediates produced during photocatalytic processes, improving the overall photocatalytic efficiency. Herein, we have reviewed the current design and preparation of chitosan and its composites, as well as their applications for the removal of various pollutants by adsorption and photocatalysis processes. Effects of operating variables such as the pH, catalyst mass, contact time, light wavelength, initial pollutant's concentration, and catalyst recyclability, are discussed. Various kinetic and isotherm models are presented to elucidate the rates, and mechanisms of pollutant's removal, onto chitosan-based composites, and several case studies are presented. Additionally, the antibacterial activity of chitosan-based composites has been discussed. This review aims to provide a comprehensive and up-to-date overview of the applications of chitosan-based composites in wastewater treatment and put forward new insights for the development of highly effective chitosan-based adsorbents and photocatalysts. Finally, the main challenges and future directions in the field are discussed.

Synthesis and Characterization of MIPs for Selective Removal of Textile Dye Acid Black-234 from Wastewater Sample

Herein, a molecularly imprinted polymer (MIP) was prepared using bulk polymerization and applied to wastewater to aid the adsorption of targeted template molecules using ethylene glycol dimethacrylate (EGDMA), methacrylic acid (MAA), acid black-234 (AB-234), 2,2'-azobisisobutyronitrile (AIBN), and methanol as a cross linker, functional monomer, template, initiator, and porogenic solvent, respectively. For a non-molecularly imprinted polymer (NIP), the same procedure was followed but without adding a template. Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and a surface area analyzer were used to determine the surface functional groups, morphology and specific surface area of the MIP and NIP. At pH 5, the AB-234 adsorption capability of the MIP was higher (94%) than the NIP (31%). The adsorption isotherm data of the MIP correlated very well with the Langmuir adsorption model with Qm 82, 83 and 100 mg/g at 283 K, 298 K, and 313 K, respectively. The adsorption process followed pseudo-second-order kinetics. The imprinted factor (IF) and Kd value of the MIP were 5.13 and 0.53, respectively. Thermodynamic studies show that AB-234 dye adsorption on the MIP and NIP was spontaneous and endothermic. The MIP proved to be the best selective adsorbent for AB-234, even in the presence of dyes with similar and different structures than the NIP.

Sustainable adsorbents for the removal of pharmaceuticals from wastewater: A review

Over the previous three decades, the worldwide use of pharmaceuticals has surged by more than 2.5 times. Although being considered essential to save many lives, pharmaceuticals have also emerged as a large source of complex environmental contaminants in recent decades. Consequently, the pharmaceuticals and their breakdown products are ending up into the water bodies thus progressively contaminating them and the surrounding environments. Based on recent studies concentrations in water sources are typically >0.1 μg/l and the concentration in treated water is typically >0.05 μg/l. These pharma drugs are removed from aquatic systems by processes such as oxidation, Ultraviolet degradation, reverse osmosis and nano-filtration. However, hazardous sludge creation, incomplete removal, expensive capital and operating costs, and the need for professional operating and maintenance personnel have all limited the economic sustainability of these systems. As a result, the presence of pharmaceuticals in water necessitates even more advanced technologies of purification to harvest clean water, yet present approaches are constrained by their high costs, low reusability, and disposal issues. Here, we review sustainable adsorbents for the removal of pharmaceuticals from wastewater. In this comprehensive review, an evaluation of water contamination caused by pharmaceutical compounds is discussed. An overview of current research on the employment of sustainable adsorbents for the removal of the major pharmaceuticals prevalent in water sources. Numerous aspects of high adsorption efficiencies of these pharmaceutical compounds with such sustainable adsorbents were observed; however, other factors, such as adsorbent regeneration and cost evaluation, must be taken into account in order to assess the true applicability of adsorbents.

Selective Removal of the Emerging Dye Basic Blue 3 via Molecularly Imprinting Technique

A molecularly imprinting polymer (MIP) was synthesized for Basic Blue 3 dye and applied to wastewater for the adsorption of a target template. The MIPs were synthesized by bulk polymerization using methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA). Basic Blue 3 dye (BB-3), 2,2′-azobisisobutyronitrile (AIBN) and methanol were used as a functional monomer, cross linker, template, initiator and porogenic solvent, respectively, while non-imprinting polymers (NIP) were synthesized by the same procedure but without template molecules. The contact time was 25 min for the adsorption of BB-3 dye from 10 mL of spiked solution using 25 mg polymer. The adsorption of dye (BB-3) on the MIP followed the pseudo-second order kinetic (k₂ = 0.0079 mg·g⁻¹·min⁻¹), and it was according to the Langmuir isotherm, with maximum adsorption capacities of 78.13, 85.4 and 99.0 mg·g⁻¹ of the MIP at 283 K, 298 K and 313 K, respectively and 7 mg·g⁻¹ for the NIP. The negative values of ΔG° indicate that the removal of dye by the molecularly imprinting polymer and non-imprinting polymer is spontaneous, and the positive values of ΔH° and ΔS° indicate that the process is endothermic and occurred with the increase of randomness. The selectivity of the MIP for BB-3 dye was investigated in the presence of structurally similar as well as different dyes, but the MIP showed higher selectivity than the NIP. The imprinted polymer showed 96% rebinding capacity at 313 K towards the template, and the calculated imprinted factor and Kd value were 10.73 and 2.62, respectively. In this work, the MIP showed a greater potential of selectivity for the template from wastewater relative to the closely similar compounds.

A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have aroused great attention as a new material for the removal or detection of pharmaceuticals and personal care products (PPCPs). However, it is not clear about the superiority and deficiency of MIPs in the process of removing or detecting PPCPs. Herein, we evaluated the performance of MIPs in the aspects of adsorption capacity, binding affinity, adsorption rate, and compatibility to other techniques, and proposed ways to improve its performance. Without regard to the selectivity of MIPs, for the PPCPs adsorption, MIPs surprisingly did not always perform better than the conventional adsorbents (non-imprinted polymers, biochar, activated carbon and resin), indicating that MIPs should be used where selectivity is crucial, for example recovery of specific PPCPs in an environmental sample extraction process. Compared to the traditional solid-phase extraction for PPCPs detection pretreatment, the usage of MIPs as substitute extraction agents could obtain high selectivity of specific substance, due to the uniformity and effectiveness of the specific sites. A promising development in the future would be to combine other simple and rapid quantitative technologies, such as electro/photochemical sensor and catalytic degradation, to realize rapid and sensitive detection of trace PPCPs.

Construction of natural polymeric imprinted materials and their applications in water treatment: A review

Molecularly imprinted materials (MIMs) have been widely used in various fields, including water treatment, chemical sensing, and biotechnology, because of their specific recognition and high selectivity. MIMs are usually obtained via two successive steps, namely, (1) copolymerization and crosslinking reactions of the preassembled complex of comonomers and a specific target compound (2) and thorough removal of template molecules. Some functional polymers are directly used as supporting materials and functional groups assembled with target compound are provided to simplify the preparation of MIMs. Natural polymers, such as chitosan, cyclodextrin, sodium alginate, starch, cellulose, lignin and their derivatives, are good candidates because of their environmentally friendly properties, low costs, and abundant active functional groups. In this study, different methods for the preparation of natural polymeric MIMs were reviewed in terms of the construction of microscopic binding cavities and macroscopic visible condensed structures with different shapes. Natural polymeric MIMs in water treatment applications, such as adsorption and detection of various pollutants from aqueous solutions, were summarized. Prospects on the development of novel and high-performance natural polymeric MIMs were discussed to overcome the difficulties in their preparation and applications.

Innovative utilization of molecular imprinting technology for selective adsorption and (photo)catalytic eradication of organic pollutants

The rapid development of industrialization and urbanization results in a numerous production of various organic chemicals to meet the increasing demand in high-quality life. During the synthesis and utilization of these chemical products, their residues unavoidably emerged in environments to severely threaten human's health. It is thus urgent to exploit effective technology for readily removing the organic pollutants with high selectivity and good reusability. As one of the most promising approaches, molecular imprinting technology (MIT) employs a chemically synthetic route to construct artificial recognition sites in highly-crosslinked matrix with complementary cavity and functional groups to target species, which have been attracting more and more interest for environmental remediation, such as the selective adsorption/separation and improved catalytic degradation of pollutants. In this review, MIT is first introduced briefly to understand their preparing process, recognition mechanism and common imprinted systems. Then, their specific binding affinities are demonstrated for selectively adsorbing and removing target molecules with a large capacity. Furthermore, the innovative utilization of MIT in catalytic eradication of pollutants is comprehensively overviewed to emphasize their enhanced efficiency and improved performances, which are classified by the used catalytically-active nanocrystals and imprinted systems. After summarizing recent advances in these fields, some limitations are discussed and possible suggestions are given to guide the future exploitation on MIT for environmental protection.

Surface modification of magnetic nanoparticles via admicellar polymerization for selective removal of tetracycline from real water samples

Production of imprinted thin membranes via admicellar polymerization

Iron-Montmorillonite-Cyclodextrin Composites as Recyclable Sorbent Catalysts for the Adsorption and Surface Oxidation of Organic Pollutants

Iron-clay-cyclodextrin composites were designed as sorbent catalysts to adsorb and oxidize pollutants from water. The clay-iron backbone served as a mechanical support and as a heterogeneous Fenton catalyst, and the cyclodextrin monomers or polymers cross-linked with polyfluorinated aromatic molecules were used to accommodate adsorption of the pollutants. The composite based on iron-clay-cyclodextrin-polymers (Fe-MMT-βCD-DFB) exhibited superior adsorption and degradation of the model pollutants, bisphenol A (BPA), carbamazepine (CBZ), and perfluorooctanoic acid (PFOA), compared to the monomer-based composite and the native iron clay. The variety of adsorption sites, such as the polyfluorinated aromatic cross-linker, cyclodextrin toroid, and iron-clay surface, resulted in high adsorption affinity toward all pollutants; BPA was primarily adsorbed to the cyclodextrin functional groups, CBZ showed high affinity toward the Fe-MMT surface and the Fe-MMT-βCD-DFB composite, whereas PFOA was adsorbed mainly to the βCD-DFB polymer. Degradation, using H₂O₂, was highly efficient, reaching over 90% degradation in 1 h for BPA and CBZ and ∼80% for PFOA. The composite also showed excellent degradation efficiency in a multicomponent system with all three model pollutants. Furthermore, the composite's activity remained steady for five consecutive cycles of adsorption and degradation. The ability to remediate a broad range of pollutants, and the high overall removal exhibited by this novel material, demonstrates the potential for future application in water remediation technologies.

Chitosan-based molecular imprinted polymer for extraction and spectrophotometric determination of ketorolac in human plasma

A selective chitosan-based ion exchange molecular imprinted polymer (MIP) was prepared for ketorolac (KET) using the sol-gel method and glutaraldehyde as a crosslinker. The nonimprinted polymer (NIP) was prepared and used as a control, during the whole experiment. The chemical and morphological characteristics of the prepared polymers were investigated using FTIR and SEM, respectively. The prepared MIP was applied to determine the optimum operational conditions for KET extraction from dilute aqueous solutions. The adsorption step was performed at pH 5 and a contact time of 20 min, using 0.1 N HCl as an elution solvent for 30 min. The specificity of the prepared polymer was indicated by an imprinting factor of 1.45. The prepared MIP was successfully applied for selective solid phase extraction and subsequent determination of KET in spiked human plasma samples over a range of 2-20 μg/mL, with a mean % recovery of 94.62% using derivative spectroscopy.

Extraction of activated epimedium glycosides in vivo and in vitro by using bifunctional-monomer chitosan magnetic molecularly imprinted polymers and identification by UPLC-Q-TOF-MS

In this work, efficient, sensitive bifunctional-monomer chitosan magnetic molecularly imprinted polymers (BCMMIPs) were fabricated and successfully applied to concentrate the metabolites of Epimedium flavonoids in rat testis and bone that were later analyzed using UPLC-Q-TOF-MS. Using chitosan and methacrylic acid as co-functional monomers, BCMMIPs exhibited a large adsorption capacity (7.60 mg/g), fast kinetics (60 min), and good selectivity. Chitosan is bio-compatible and non-toxic, and methacrylic acid provides multiple hydrogen bond donors. The BCMMIPs were injected into rat testis to specifically enrich the total flavonoid metabolites in vivo and were used to extract metabolites from bone in vitro. The results showed that the BCMMIPs coupled with UPLC-Q-TOF-MS successfully identified 28 compounds from testis and 18 compounds from bone, including 19 new compounds. This study provided a reliable protocol for the concentration of metabolites from complex biological samples, and several new metabolites of Epimedium flavonoids were found in vivo and in vitro.

Gas Phase Computational Study of Diclofenac Adsorption on Chitosan Materials

Environmental pollution with non-steroidal anti-inflammatory drugs and their metabolites exposes living organisms on their long-lasting, damaging influence. Hence, the ways of non-steroidal anti-inflammatory drugs (NSAIDs) removal from soils and wastewater is sought for. Among the potential adsorbents, biopolymers are employed for their good availability, biodegradability and low costs. The first available theoretical modeling study of the interactions of diclofenac with models of pristine chitosan and its modified chains is presented here. Supermolecular interaction energy in chitosan:drug complexes is compared with the the mutual attraction of the chitosan dimers. Supermolecular interaction energy for the chitosan-diclofenac complexes is significantly lower than the mutual interaction between two chitosan chains, suggesting that the diclofenac molecule will encounter problems when penetrating into the chitosan material. However, its surface adsorption is feasible due to a large number of hydrogen bond donors and acceptors both in biopolymer and in diclofenac. Modification of chitosan material introducing long-distanced amino groups significantly influences the intramolecular interactions within a single polymer chain, thus blocking the access of diclofenac to the biopolymer backbone. The strongest attraction between two chitosan chains with two long-distanced amino groups can exceed 120 kcal/mol, while the modified chitosan:diclofenac interaction remains of the order of 20 to 40 kcal/mol.

Synthesis, characterization, and evaluation of a selective molecularly imprinted polymer for quantification of the textile dye acid violet 19 in real water samples

A molecularly imprinted polymer (MIP) was developed for the determination of acid violet 19 (AV19) dye. The MIP was synthesized by polymerization using 1-vinyl imidazole (functional monomer) and 2,2'-azobis(2-methylpropionitrile) as the radical initiator. The functional monomer was previously selected by computational simulations. The MIP adsorption data could be fitted using the Langmuir model obtained a Q_m value of 6.93 mg g^-1 and 2.84 mg g^-1 for the corresponding non-imprinted polymer (NIP) and the process followed pseudo-second-order kinetics (k₂ 0.2416 mg g^-1 min^-1 MIP). The BET specific surface areas were 229.6 m² g^-1 and 28.6 m² g^-1, to MIP and NIP, respectively. Analyses showed that the material provided excellent selectivity towards acid violet 19 (AV19) when compared to other analytes including Acid Violet 17 (AV17), Tartrazine (TZ), Acid Red 14 (AR14), Patent blue-VF (PBV), Sunset yellow FCF (SY) and Acid Red 1 (AR1). The calculated K_d value for the MIP was 0.116 L g^-1 and the imprinting factor was 2.89. This alternative and effective material for the enrichment, extraction, and determination of acid violet 19 presents in complex real samples was applied using two different rivers water and industrial effluent, with excellent recoveries values ranging between 85% up to 99%.

Preparation and evaluation of a porous molecularly imprinted polymer for selective recognition of the antiepileptic drug carbamazepine

A novel and porous molecularly imprinted polymer (PMIP) was synthesized and used as a solid-phase extraction adsorbent for preconcentration of carbamazepine (CBZ) prior to its quantitation by high-performance liquid chromatography (HPLC) in various sample forms (e.g., drinking water, river water, hospital wastewater, and pharmaceuticals). PMIP-CBZ was applied to a polymerization process in which polystyrene spheres were coated with a silica layer. Removal of polystyrene spheres and formation of porous silica facilitated the recovery of CBZ (99.4%) during the extraction process. Site accessibility to the surface of PMIP-CBZ increased the density of high-recognition sites. PMIP-CBZ was characterized by Fourier-transform infrared spectroscopy and scanning electron microscopy. The key variables influencing the extraction efficiency of PMIP (e.g., adsorbent loading, eluent type, eluent volume, reusability of the adsorbent, and cross-reactivity) were optimized. The optimized protocol was successfully employed to quantify CBZ with limit of detection and limit of quantification as 0.082 and 0.270 ng/mL, respectively (linear detection range: 0.5-250 ng/mL and a relative standard deviation:  < 5%). Use of the PMIP adsorbent resulted in a sensitive and stable method for efficiently quantitation of CBZ from various real sample matrices.

Efficiency comparison of nylon-6-based solid-phase and stir bar sorptive extractors for carbamazepine extraction

Aim: Two approaches based on molecularly imprinted polymers-stir bar sorptive extraction (MIP-SBSE) and -magnetic solid-phase extraction (MIP-MSPE) have been used for extraction of carbamazepine (CBZ) from serum samples. Methodology: In MSPE and SBSE, development was achieved by employing a polycaprolactam coating. The Cecil® chromatographic system equipped with a UV-Vis detector was used for analytical determination of CBZ. Results: The linearity of calibration curves was in the concentration ranges of 0.2–12 and 0.05–12 μg ml-1 for MIP-SBSE and MIP-MSPE, respectively. Conclusion: MIP-MSPE was selected in preference to MIP-SBSE since lower limits of detection were achievable using MIP-MSPE method. The CBZ-MIP-MSPE-HPLC-UV method was successfully applied to CBZ determination in real serum samples of patients receiving CBZ.

Chitin/Chitosan: Versatile Ecological, Industrial, and Biomedical Applications

Chitin is a linear polysaccharide of N-acetylglucosamine, which is highly abundant in nature and mainly produced by marine crustaceans. Chitosan is obtained by hydrolytic deacetylation. Both polysaccharides are renewable resources, simply and cost-effectively extracted from waste material of fish industry, mainly crab and shrimp shells. Research over the past five decades has revealed that chitosan, in particular, possesses unique and useful characteristics such as chemical versatility, polyelectrolyte properties, gel- and film-forming ability, high adsorption capacity, antimicrobial and antioxidative properties, low toxicity, and biocompatibility and biodegradability features. A plethora of chemical chitosan derivatives have been synthesized yielding improved materials with suggested or effective applications in water treatment, biosensor engineering, agriculture, food processing and storage, textile additives, cosmetics fabrication, and in veterinary and human medicine. The number of studies in this research field has exploded particularly during the last two decades. Here, we review recent advances in utilizing chitosan and chitosan derivatives in different technical, agricultural, and biomedical fields.

Hexavalent chromium removal from aqueous solution using functionalized chitosan as a novel nano-adsorbent: modeling and optimization, kinetic, isotherm, and thermodynamic studies, and toxicity testing

Hexavalent chromium is a highly toxic metal that can enter drinking water sources. Chitosan, which contains amino and hydroxyl functional groups, is considered an appropriate candidate to remove heavy metals through absorption. In this study, a novel adsorbent, magnetic nanoparticles of chitosan modified with polyhexamethylene biguanide (Ch-PHMB NPs) was synthesized and was used to successfully remove chromium from aqueous solution. Quadratic models with independent variables including pH, adsorbent dosage, time, and the initial concentration of chromium were proposed through RSM to describe the behavior of both magnetic chitosan (M-Ch) and Ch-PHMB NPs in Cr(VI) removal. Optimized models with adjusted R² values of 0.8326 and 0.74 for M-Ch and Ch-PHMB NPs were developed. Cr(VI) removal from aqueous solution by both absorbents followed pseudo-second-order kinetics. The experimental data were best fitted to the Temkin and Freundlich models for M-Ch and Ch-PHMB NPs, respectively. M-Ch and Ch-PHMB NPs can effectively remove the hexavalent chromium from aqueous solution with pH above 7. Ch-PHMB NPs have higher removal efficiency than M-Ch, removing up to 70% of Cr(VI) from aqueous solution. However, toxicity evaluation on Daphnia magna revealed that Ch-PHMB NPs was more toxic than M-Ch nanoparticles.

Overview of Piezoelectric Biosensors, Immunosensors and DNA Sensors and Their Applications

Piezoelectric biosensors are a group of analytical devices working on a principle of affinity interaction recording. A piezoelectric platform or piezoelectric crystal is a sensor part working on the principle of oscillations change due to a mass bound on the piezoelectric crystal surface. In this review, biosensors having their surface modified with an antibody or antigen, with a molecularly imprinted polymer, with genetic information like single stranded DNA, and biosensors with bound receptors of organic of biochemical origin, are presented and discussed. The mentioned recognition parts are frequently combined with use of nanoparticles and applications in this way are also introduced. An overview of the current literature is given and the methods presented are commented upon.

Molecular imprinted polymers based on magnetic chitosan with different deep eutectic solvent monomers for the selective separation of catechins in black tea

Two types of molecular-imprinted polymers-based magnetic chitosan with facile deep eutectic solvent-functional monomers (Fe3 O4 -CTS@DES-MIPs) were synthesized and applied as adsorbents in magnetic solid-phase extraction (MSPE) for the selective recognition and separation of (+)-catechin, (-)-epicatechin, and (-)-epigallocatechin gallate in black tea. The obtained Fe3 O4 -CTS@DES-MIPs were characterized by Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The selective recognition ability was examined by adsorption experiments. The actual amounts of (+)-catechin, (-)-epicatechin, and (-)-epigallocatechin gallate extracted from black tea using Fe3 O4 -CTS@DES-MIPs by the MSPE method were 13.10, 6.32, and 8.76 mg/g, respectively. In addition, the magnetic Fe3 O4 -CTS@DES-MIPs showed outstanding recognition and selectivity. Therefore, it can be used to separate bioactive compounds from black tea. The new-type of DES adopted as the functional monomer in this paper provides a new perspective for the recognition and separation of bioactive compounds.

Computer-aided design of magnetic molecularly imprinted polymer nanoparticles for solid-phase extraction and determination of levetiracetam in human plasma

Analytical methods should be accurate and specific to measure plasma drug concentration. Nevertheless, current sample preparation techniques suffer from limitations, including matrix interference and intensive sample preparation. In this study, a novel technique was proposed for the synthesis of a molecularly imprinted polymer (MIP) on magnetic Fe₃O₄ nanoparticles (NPs) with uniform core–shell structure. The Fe₃O₄@MIPs NPs were then applied to separate and enrich an antiepileptic drug, levetiracetam, from human plasma. A computational approach was developed to screen the functional monomers and polymerization solvents to provide a suitable design for the synthesized MIP. Different analysis techniques and re-binding experiments were performed to characterize the Fe₃O₄@MIP NPs, as well as to identify optimal conditions for the extraction process. Adsorption isotherms were best fitted to the Langmuir model and adsorption kinetics were modeled with pseudo-second-order kinetics. The Fe₃O₄@MIP NPs showed reasonable adsorption capacity and improved imprinting efficiency. A validated colorimetric assay was introduced as a comparable method to a validated HPLC assay for the quantitation of levetiracetam in plasma in the range of 10–80 μg mL⁻¹ after extraction. The results from the HPLC and colorimetric assays showed good precision (between 1.08% and 9.87%) and recoveries (between 94% and 106%) using the Fe₃O₄@MIP NPs. The limit of detection and limit of quantification were estimated to be 2.58 μg mL⁻¹ and 7.81 μg mL⁻¹, respectively for HPLC assay and 2.32 μg mL⁻¹ and 7.02 μg mL⁻¹, respectively for colorimetric assay. It is believed that synthesized Fe₃O₄@MIP NPs as a sample clean-up technique combined with the proposed assays can be used for determination of levetiracetam in plasma.

A novel molecularly imprinted polymer on Fe₃O₄ nanoparticles was applied to extract antiepileptic drug; levetiracetam from plasma for TDM purposes.

Novel Isocyanate-Modified Carrageenan Polymer Materials: Preparation, Characterization and Application Adsorbent Materials of Pharmaceuticals

The present study focused on the synthesis and application of novel isocyanate-modified carrageenan polymers as sorbent materials for pre-concentration and removal of diclofenac (DCF) and carbamazepine (CBZ) in different aqueous matrices (surface waters and wastewaters). The polymer materials were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Thermal Gravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM). The effects on the adsorption behavior were studied, and the equilibrium data were fitted by the Langmuir and Freundlich models. The maximum adsorption capacity (Q_max) was determined by Langmuir–Freundlich model and was ranged for iota-carrageenan (iCAR) from 7.44 to 8.51 mg/g for CBZ and 23.41 to 35.78 mg/g for DCF and for kappa-carrageenan (kCAR) from 7.07 to 13.78 mg/g for CBZ and 22.66 to 49.29 mg/g for DCF. In the next step, dispersive solid phase extraction (D-SPE) methodology followed by liquid desorption and liquid chromatography mass spectrometry (LC/MS) has been developed and validated. The factors, which affect the performance of D-SPE, were investigated. Then, the optimization of extraction time, sorbent mass and eluent’s volume was carried out using a central composite design (CCD) and response surface methodology (RSM). Under the optimized conditions, good linear relationships have been achieved with the correlation coefficient (R²) varying from 0.9901 to 0.995. The limits of detections (LODs) and limits of quantifications (LOQs) ranged 0.042–0.090 μg/L and 0.137–0.298 μg/L, respectively. The results of the recoveries were 70–108% for both analytes, while the precisions were 2.8–17.5% were obtained, which indicated that the method was suitable for the analysis of both compounds in aqueous matrices.