Augmented digestion of lignocellulose by steam explosion, acid and alkaline pretreatment methods: a review

Sustainable biorefinery approach by utilizing xylose fraction of lignocellulosic biomass

Lignocellulosic biomass (LCB) has been a lucrative feedstock for developing biochemical products due to its rich organic content, low carbon footprint and abundant accessibility. The recalcitrant nature of this feedstock is a foremost bottleneck. It needs suitable pretreatment techniques to achieve a high yield of sugar fractions such as glucose and xylose with low inhibitory components. Cellulosic sugars are commonly used for the bio-manufacturing process, and the xylose sugar, which is predominant in the hemicellulosic fraction, is rejected as most cell factories lack the five‑carbon metabolic pathways. In the present review, more emphasis was placed on the efficient pretreatment techniques developed for disintegrating LCB and enhancing xylose sugars. Further, the transformation of the xylose to value-added products through chemo-catalytic routes was highlighted. In addition, the review also recapitulates the sustainable production of biochemicals by native xylose assimilating microbes and engineering the metabolic pathway to ameliorate biomanufacturing using xylose as the sole carbon source. Overall, this review will give an edge on the bioprocessing of microbial metabolism for the efficient utilization of xylose in the LCB.

Unlocking the Potential of Brewers' Spent Grain: A Sustainable Model to Use Beer for Better Outcome in Chronic Kidney Disease

The rising global incidence of chronic inflammatory diseases calls for innovative and sustainable medical solutions. Brewers' spent grain (BSG), a byproduct of beer production, presents a unique opportunity in this regard. This review explores the multifaceted health benefits of BSG, with a focus on managing chronic kidney disease (CKD). BSG is identified as a potent prebiotic with potential as a therapeutic agent in CKD. We emphasize the role of gut dysbiosis in CKD and discuss how BSG could help mitigate metabolic derangements resulting from dysbiosis and CKD. Fermentation of BSG further enhances its positive impact on gut health. Incorporating fermented BSG as a key component in preventive health care could promote a more sustainable and healthier future. By optimizing the use of this typically discarded byproduct, we can align proactive health-care strategies with responsible resource management, benefiting both people and the environment.

Structural characterization of modified coconut husk lignin via steam explosion pretreatment as a renewable phenol substitutes

The effects of steam explosion (SE) pretreatment on the structural properties of lignin isolated from coconut husk (CH) biomass via soda pulping were investigated in this work. The isolated SE lignin was classified as dilute acid impregnation SE lignin (ASEL), water impregnation SE lignin (WSEL), and 2-naphthol impregnation SE lignin (NSEL). The various types of functional groups isolated from SE lignin were characterized and compared using a variety of complementary analyses: FTIR spectroscopy, NMR spectroscopy, GPC chromatography, HPAEC-PAD chromatography and thermal analyses. It was revealed that ASEL has the highest solid recovery with 55.89 % yield as well as the highest sugars content compared to WSEL (45.66 % yield) and NSEL (49.37 % yield). Besides, all isolated SE lignin contain a significant quantity of non-condensed G-type and S-type units but less amount of H-type units as supported by previous research. The SE lignin produced lignin with higher molecular weight (Mw ASEL: 72725 g mol-1 > Mw WSEL: 13112 g mol-1 > Mw NSEL: 6891 g mol-1) seems to influence the success of the synthesis reaction of phenolic resins. Because of the large variances in the physicochemical properties of SE lignin polymers, their structural properties were increased toward numerous alternative techniques in lignin-based applications.

Expansion Improved the Physical and Chemical Properties and In Vitro Rumen Digestibility of Buckwheat Straw

The hard texture and poor palatability of straw are important factors that hinder its application in feed. Expansion is a technology that can improve the utilization of biomass, but few studies have comprehensively revealed how to change physicochemical characteristics to improve nutritional value. In this study, mechanical and chemical methods were combined to study the texture properties, rheological properties, and physicochemical structures of straw, and its utilization value was evaluated by in vitro rumen digestion. Expansion caused hemicellulose degradation, cellulose separation, and lignin redistribution, resulting in a decrease in crystallinity. The hardness and chewiness of expanded straw were reduced by 55% to 66%, significantly improving palatability. The compressive stress could be reduced by 54-73%, and the relaxation elasticity was reduced by 5% when expanded straw was compressed. The compression deformation of expanded straw was doubled compared to feedstock, and the compacting degree was improved. Expanded straw significantly improved digestibility and gas production efficiency, which was due to the pore structure increasing the attachment of rumen microorganisms; besides that, the reduction of the internal structural force of the straw reduced energy consumption during digestion. The lignin content decreased by 10%, the hardness decreased further in secondary expansion, but the digestibility did not improve significantly.

Life cycle assessment of calcium oxide pretreatment of corn stover with carbon dioxide neutralization for ethanol production

This work used life-cycle assessment (LCA) to determine the environmental and human health impacts of four ethanol production scenarios (S1: CaO pretreatment + H₂SO₄ neutralization + C6 yeast fermentation; S2: CaO pretreatment + CO₂ neutralization + C6 yeast fermentation; S3: CaO pretreatment + H₂SO₄ neutralization + C6/C5 yeast fermentation; and S4: CaO pretreatment + CO₂ neutralization + C6/C5 yeast fermentation), with the functional unit being 1 kg of 95 % ethanol. TheLCA results showed that the total ozone depletion, global warming potential, smog, acidification, eutrophication, and ecotoxicity values were comparable when CO₂ or H₂SO₄ were used to adjust the pH of CaO-pretreated slurry. However, using CO₂ for neutralization and C6/C5 yeast for fermentation demonstrated significant benefits in terms of carcinogenicity, non-carcinogenicity, respiratory effect, ecotoxicity, and fossil fuel depletion. The findings indicate that the choice of chemicals and strains plays a key role in determining environmental and human health impacts.

Comparison of Alkaline Sulfite Pretreatment and Acid Sulfite Pretreatment with Low Chemical Loading in Saccharification of Poplar

Sulfite pretreatment is a productive process for lignin dissolution in lignocelluloses and to reduce the hydrophobicity of lignin by sulfonation, thus promoting the hydrolyzability of the substrate. Previously, sulfite pretreatment needs high dosages of chemicals and thus results in the high cost of the pretreatment and the great pressure of environmental pollution. To overcome these problems, it was crucial to research whether alkaline sulfite pretreatment (ALS) and acid sulfite pretreatment (ACS) with low chemical loading could enhance the saccharification of poplar. In this work, the results indicated that with low loading of chemicals in sulfite pretreatment, ALS pretreatment (1.6% Na2SO3 and 0.5% NaOH) at 180 °C removed more lignin, resulted in lower hydrophobicity and higher cellulase adsorption capacity of poplar than ACS pretreatment (1.6% Na2SO3 and 0.5% H2SO4) at 180 °C. A satisfying glucose yield of 84.9% and a xylose yield of 76.0% were obtained from poplar after ALS pretreatment with 1.6% Na2SO3 and 0.5% NaOH at 180 °C for 1 h using 10 FPU cellulase/g dry matter, saving sodium sulfite by 60.0% compared to the loading of sulfite in traditional sulfite pretreatment. The strategy developed in this work reduced chemical loading and cellulase loading in alkali sulfite pretreatment for the saccharification of poplar.

Efficient production of lactic acid from cellulose and xylan in sugarcane bagasse by newly isolated Lactiplantibacillus plantarum and Levilactobacillus brevis through simultaneous saccharification and co-fermentation process

Sugarcane bagasse is one of the promising lignocellulosic feedstocks for bio-based chemicals production. However, to date, most research focuses mainly on the cellulose conversion process, while hemicellulose remains largely underutilized. The conversion of glucose and xylose derived from lignocellulosic biomass can be a promising strategy to improve utilization efficiencies of resources, energy, and water, and at the same time reduce wastes generated from the process. Here, attempts were made to convert cellulose and xylan in sugarcane bagasse (SB) into lactic acid (LA) through a pre-hydrolysis and simultaneous saccharification and co-fermentation (SScF) process using newly isolated Lactiplantibacillus plantarum TSKKU P-8 and Levilactobacillus brevis CHKKU N-6. The process yielded 91.9 g/L of LA, with a volumetric productivity of 0.85 g/(L·h). This was equivalent to 137.8 ± 3.4 g-LA, a yield on substrate (pretreated SB) of 0.86 g/g, and a productivity of 1.28 g/h, based on a final volume of 1.5 L. On the other hand, pre-hydrolysis and simultaneous saccharification and fermentation (SSF) process using La. plantarum TSKKU P-8 as a monoculture gave 86.7 ± 0.2 g/L of LA and a volumetric productivity of 0.8 g/(L·h), which were equivalent to 104.8 ± 0.3 g-LA, a yield on substrate of 0.65 g/g, and a productivity of 0.97 g/h, based on a final volume of 1.2 L. Mass balance calculated based on mass of raw SB entering the process showed that the SScF process improved the product yield by 32% as compared with SSF process, resulting in 14% improvement in medium-based economic yield.

Different pre-treatments and kinetic models for bioethanol production from lignocellulosic biomass: A review

Lignocellulosic biomass is the generally explored substrate to produce bioethanol for environmental sustainability due to its availability in abundance. However, the complex network of cellulose-hemicellulose-lignin present in it makes its hydrolysis as a challenging task. To boost the effectiveness of conversion, biomass is pre-treated before enzymatic hydrolysis to alter or destroy its original composition. Enzymes like Cellulases are widely used for breaking down cellulose into fermentable sugars. Enzymatic hydrolysis is a complex process involving many influencing factors such as pH, temperature, substrate concentration. This review presents major four pre-treatment methods used for hydrolysing different substrates under varied reaction conditions along with their mechanism and limitations. A relative comparison of data analysis for most widely studied 10 kinetic models is briefly explained in terms of substrates used to get the brief insight about hydrolysis rates. The summary of pre-treatment methods and hydrolysis rates including cellulase enzyme kinetics will be the value addition for upcoming researchers for optimising the hydrolysis process.

Microbial Lipid Based Biorefinery Concepts: A Review of Status and Prospects

The use of lignocellulosic biomass as a raw material for the production of lipids has gained increasing attention, especially in recent years when the use of food in the production of biofuels has become a current technology. Thus, the competition for raw materials for both uses has brought the need to create technological alternatives to reduce this competition that could generate a reduction in the volume of food offered and a consequent commercial increase in the value of food. Furthermore, the use of microbial oils has been studied in many industrial branches, from the generation of renewable energy to the obtainment of several value-added products in the pharmaceutical and food industries. Thus, this review provides an overview of the feasibility and challenges observed in the production of microbial lipids through the use of lignocellulosic biomass in a biorefinery. Topics covered include biorefining technology, the microbial oil market, oily microorganisms, mechanisms involved in lipid-producing microbial metabolism, strain development, processes, lignocellulosic lipids, technical drawbacks, and lipid recovery.

Recent Advances in Application of Polyoxometalates in Lignocellulose Pretreatment and Transformation

Lignocellulose, composed of cellulose, hemicellulose, and lignin, holds immense promise as a renewable resource for the production of sustainable chemicals and fuels. Unlocking the full potential of lignocellulose requires efficient pretreatment strategies. In this comprehensive review, efforts were taken to survey the latest developments in polyoxometalates (POMs)-assisted pretreatment and conversion of lignocellulosic biomass. An outstanding finding highlighted in this review is that the deformation of the cellulose structure from I to II accompanied by the removal of xylan/lignin through the synergistic effect of ionic liquids (ILs) and POMs resulted in a significant increase in glucose yield and improved cellulose digestibility. Furthermore, successful integration of POMs with deep eutectic solvents (DES) or γ-valerolactone/water (GVL/water) systems has demonstrated efficient lignin removal, opening avenues for advanced biomass utilization. This review not only presents the key findings and novel approaches in POMs-based pretreatment but also addresses the current challenges and prospects for large-scale industrial implementation. By offering a comprehensive assessment of the progress in this field, this review serves as a valuable resource for researchers and industry professionals aiming to harness the potential of lignocellulosic biomass for sustainable chemical and fuel production.

Strategies of pretreatment of feedstocks for optimized bioethanol production: distinct and integrated approaches

Bioethanol is recognized as a valuable substitute for renewable energy sources to meet the fuel and energy demand of the nation, considered an environmentally friendly resource obtained from agricultural residues such as sugarcane bagasse, rice straw, husk, wheat straw and corn stover. The energy demand is sustained using lignocellulosic biomass to produce bioethanol. Lignocellulosic biomass (LCBs) is the point of attention in replacing the dependence on fossil fuels. The recalcitrant structure of the lignocellulosic biomass is disrupted using effective pretreatment techniques that separate complex interlinked structures among cellulose, hemicellulose, and lignin. Pretreatment of biomass involves various physical, chemical, biological, and physiochemical protocols which are of importance, dependent upon their individual or combined dissolution effect. Physical pretreatment involves a reduction in the size of the biomass using mechanical, extrusion, irradiation, and sonification methods while chemical pretreatment involves the breaking of various bonds present in the LCB structure. This can be obtained by using an acidic, alkaline, ionic liquid, and organosolvent methods. Biological pretreatment is considered an environment-friendly and safe process involving various bacterial and fungal microorganisms. Distinct pretreatment methods, when combined and utilized in synchronization lead to more effective disruption of LCB, making biomass more accessible for further processing. These could be utilized in terms of their effectiveness for a particular type of cellulosic fiber and are namely steam explosion, liquid hot water, ammonia fibre explosion, CO₂ explosion, and wet air oxidation methods. The present review encircles various distinct and integrated pretreatment processes developed till now and their advancement according to the current trend and future aspects to make lignocellulosic biomass available for further hydrolysis and fermentation.

Solid-State Fermentation of Steam-Exploded Opuntia ficus-indica Cladodes Using Trichoderma reesei CCT-2768 for the Production of Cellulolytic Enzymes

The sustainable development of the drylands, i.e., regions with limited availability of water, depends on the exploitation of the few biomass types that can thrive in such conditions, such as the Opuntia ficus-indica, a plant of the Cactaceae family. In the present study, the cladodes of O. ficus-indica were used as a substrate by the fungus Trichoderma reesei CCT-2768 for the production of cellulolytic enzymes through solid-state fermentation. Firstly, the extraction of the mucilage, soluble components of industrial interest, was evaluated. Temperature, water-to-biomass ratio, and time of mixture were varied using an experimental design and impacted, especially, the pectin removal. Then, the lignocellulosic residue was used for the production of enzymes; the effect of the water activity, biomass pretreatment, mineral supplementation, temperature, and inoculum size on the enzymatic production were investigated using two sets of experimental designs. The steam explosion pretreatment exposed the fiber to the microbial action and boosted the enzyme production, provided that the medium was supplemented with salts. This combination has improved the production of xylanase, CMCase, FPase, and polygalacturonase by 27, 62, 98, and 185%, respectively. The temperature of 35 °C was determined as the optimal for the production of FPase, xylanase, and polygalacturonase, while no effect was observed on the production of CMCase and β-glucosidase. The optimization of the enzymatic production performed in this study can potentially provide a new application for the Opuntia biomass and improve the sustainable development of the drylands.

Physicochemical, structure properties and in vitro hypoglycemic activity of soluble dietary fiber from adlay (Coix lachryma-jobi L. var. ma-yuen Stapf) bran treated by steam explosion

To enhance the content of adlay bran soluble dietary fiber (SDF) and improve its functionality, we investigated the influences of steam explosion (SE) on the physicochemical, structural properties, and in vitro hypoglycemic activities of adlay bran SDF. The cellulose, hemicellulose, and lignin contents of adlay bran decreased significantly after SE treatment. When the SE strength was 0.8 MPa for 3 min, the SDF content was 9.37%, which was a significant increase of 27.48% compared to the control. Under these conditions, SDF showed the highest oil-holding capacity (OHC) (2.18 g/g), cholesterol adsorption capacity (CAC) (27.29 mg/g), glucose adsorption capacity (GAC) (15.54 mg/g), glucose dialysis retardation index (GDRI) (36.57%), and α-Amylase activity inhibition ratio (α-AAIR) (74.14%). Compared with SDF from untreated adlay bran, SDF from SE-treated adlay bran showed lower weight molecular. In addition, differential scanning calorimetry (DSC) measurement showed that the peak temperature of SDF from adlay bran treated by SE increased by 4.19°C compared to the untreated SDF sample. The structure of SDF from adlay bran treated by SE showed that the SDF surface was rough and poriferous and the specific surface areas increased. In conclusion, SE pretreatment increases the content of SDF in adlay bran and improves its physicochemical, structural properties, and biological activities, which will be beneficial for the further exploitation of adlay bran.

Apricot Seed Shells and Walnut Shells as Unconventional Sugars and Lignin Sources

The present study focuses on using apricot seeds shells and walnut shells as a potential renewable material for biorefinery in Ukraine. The goal of the research work was to determine the relationship between the chemical composition of solid residues from biomass after acid pretreatment with H₂SO₄, alkaline pretreatment with NaOH, and a steam explosion pretreatment and the recovery of sugars and lignin after further enzymatic hydrolysis with the application of an industrial cellulase Cellic CTec2. Apricot seeds shells and walnut shells consist of lots of cellulose (35.01 and 24.19%, respectively), lignin (44.55% and 44.63%, respectively), hemicelluloses (10.77% and 26.68%, respectively), and extractives (9.97% and 11.41%, respectively), which affect the efficiency of the bioconversion of polysaccharides to sugars. The alkaline pretreatment was found to be more efficient in terms of glucose yield in comparison with that of acid and steam explosion, and the maximum enzymatic conversions of cellulose reached were 99.7% and 94.6% for the solids from the apricot seeds shells and the walnut shells, respectively. The maximum amount of lignin (82%) in the residual solid was obtained during the processing of apricot seed shells submitted to the acid pretreatment. The amount of lignin in the solids interferes with the efficiency of enzymatic hydrolysis. The results pave the way for the efficient and perspective utilization of shells through the use of inexpensive, simple and affordable chemical technologies, obtaining value-added products, and thus, reducing the amount of environmental pollution (compared to the usual disposal practice of direct burning) and energy and material external dependency (by taking advantage of these renewable, low-cost materials).

Dilute acid pretreatment for enhancing the enzymatic saccharification of agroresidues using a Botrytis ricini endoglucanase

The enormous amount of agroindustrial residues generated in Brazil can be used as biomass to produce fermentable sugars. This study compared the pretreatments with different proportions of dilute acid. The method involved pretreatment with 0.5%, 1%, and 1.5% (v/v) sulfuric acid, followed by hydrolysis using the halotolerant and thermostable endoglucanase from Botrytis ricini URM 5627. The physicochemical characterization of plant biomass was performed using XRD, FTIR, and SEM. The pretreatment significantly increased the production of fermentable sugars following enzymatic saccharification from wheat bran, sugarcane bagasse, and rice husk: 153.67%, 91.98%, and 253.21% increment in sugar production; 36.39 mg⋅g^-1 ± 1.23, 39.55 mg⋅g^-1 ± 1.70, and 42.53 mg⋅g^-1 ± 7.61 mg⋅L^-1 of glucose; and 3.26 ± 0.35 mg⋅g^-1 , 3.61mg⋅g^-1 ± 0.74 and 3.59 mg⋅g^-1 ± 0.80 of fructose were produced, respectively. In conclusion, biomass should preferably be pretreated before the enzymatic saccharification using B. ricini URM 5627 endoglucanase.

Effects of hydrochar and biogas slurry reflux on methane production by mixed anaerobic digestion of cow manure and corn straw

This study aimed to enhance methane production from mixed anaerobic digestion of cow manure and corn straw by adding hydrochar and biogas slurry reflux. The hydrochar characterization revealed that it can provide attachment for microbial growth, and abundant surface functional groups (such as C-O, CO, C-OH, and C-N) for adsorption. Direct interspecies electron transfer (DIET) mediated by surface oxygen-containing functional groups on hydrochar increased the methane yield. The experimental group added with hydrochar and biogas slurry reflux had the highest methane and biogas production (34.40% and 36.98% higher than the control group, respectively). Results demonstrate hydrochar and biogas slurry reflux can improve microorganism species richness in anaerobic digestion systems, in which hydrochar can also improve microorganism species uniformity. Distance-based redundancy analysis showed that the VFAs, and pH had the greatest effects on the composition of the microbial community. The dominant microorganism at the phylum level in AD system were Bacteroidetes, Firmicutes, and Proteobacteria. The addition of hydrochar and biogas slurry reflux can significantly increase the species abundance of Methanobacterium. These results indicate that the addition of hydrochar and biogas slurry reflux can improve the corresponding microbial abundance, in which hydrochar can enhance the redox characteristics and DIET between microorganism, biogas slurry reflux can also increase nutrient content of anaerobic digestion system, and collectively promote the methane yield.

A comprehensive review on the biological conversion of lignocellulosic biomass into hydrogen: Pretreatment strategy, technology advances and perspectives

The globe has dependent on energy generation and utilization for many years; conversely, ecological concerns constrained the world to view hydrogen as an alternative for economic development. Lignocellulosic biomass is broadly accessible as a low-cost renewable feedstock and nonreactive nature; it has received a lot of consideration as a global energy source and the most attractive alternative to replace fossil natural substances for energy production. Pretreatment of lignocellulosic biomass is essential to advance its fragmentation and lower the lignin content for sustainable energy generation. This review's goal is to provide the different pretreatment strategies for enlarging the solubility and surface area of lignocellulosic biomass. The biological conversion of lignocellulosic biomass to hydrogen was reviewed and operational conditions and enhancing methods were discussed. This review summarizes the working conditions, parameters, yield percentages, techno-economic analysis, challenges, and future recommendations on the direct conversion of biomass to hydrogen.

Microbial gut diversity in four grasshopper species and its correlation with cellulose digestibility

Grasshoppers are common pests, and their intestinal microbes have coevolved with them. These microorganisms have varied community structures, and they participate in the nutritional absorption and metabolism of grasshoppers. Here, we describe the gut microbiota diversity of four species of grasshoppers, Oxya chinensis, Pararcyptera microptera meridionalis, Gastrimargus marmoratus, and Calliptamus abbreviatus. We constructed a 16S rDNA gene library and analyzed the digestibility of cellulose and hemicellulose in grasshoppers using moss black phenol and anthrone colorimetry. The grasshopper with the highest microbial diversity in the gut among the four species was Oxya chinensis, and there were no significant differences in gut microbial diversity between the two geographic collections of Oxya chinensis. The most dominant phyla of the four grasshopper gut microorganisms were Proteobacteria, Bacteroidetes, and Firmicutes, and the most dominant genus was Enterobacter. The gut microbiota features of the four grasshoppers were correlated with their cellulose and hemicellulose digestibility. There was a significant positive correlation with cellulose digestibility for Pantoea. A significant negative correlation was found with cellulose digestibility for Acinetobacter, Enterococcus, Citrobacter, Serratia. A significant negative correlation was found with hemicellulose digestibility for Pantoea. This study contributes to the understanding of the structural composition of different species of grasshoppers gut microbiota, which may be useful for developing grasshopper digestive tracts as bioreactors for cellulose decomposition, improving the decomposition and utilization of agricultural straw, producing clean biomass energy, and processing biologically derived products.

A Review of the Current State and Future Prospects in Resource Recovery of Chinese Cereal Vinegar Residue

Vinegar residue (VR) is a typical organic solid waste in Chinese cereal vinegar production. It is characterized by high yield, high moisture and low pH and is rich in lignocellulose and other organic matter. To avoid the environmental pollution caused by VR, it should be properly treated. The industry’s existing treatment processes, landfills and incineration, cause secondary pollution and waste of resources. Therefore, there is an urgent demand for environmentally friendly and cost-effective resource recovery technologies for VR. To date, a considerable amount of research has been performed in the area of resource recovery technologies for VR. This review summarizes the reported resource recovery technologies, mainly anaerobic digestion, feed production, fertilizer production, high-value product production and soil/water remediation. The principles, advantages and challenges of these technologies are highlighted. Finally, as a future perspective, a cascade and full utilization model for VR is proposed by considering the inherent drawbacks and economic-environmental feasibility of these technologies.

Energy Crops and Methane: Process Optimization of Ca(OH)2 Assisted Thermal Pretreatment and Modeling of Methane Production

Switchgrass earned its place globally as a significant energy crop by possessing essential properties such as being able to control erosion, low cost of production, biomass richness, and appeal for biofuel production. In this study, the impact of a Ca(OH)₂-assisted thermal pretreatment process on the switchgrass variety Shawnee for methane fuel production was investigated. The Ca(OH)₂-assisted thermal pretreatment process was optimized to enhance the methane production potential of switchgrass. Solid loading (3-7%), Ca(OH)₂ concentration (0-2%), reaction temperature (50-100 °C), and reaction time (6-16 h) were selected as independent variables for the optimization. Methane production was obtained as 248.7 mL CH₄ gVS^-1 under the optimized pretreatment conditions. Specifically, a reaction temperature of 100 °C, a reaction time of 6 h, 0% Ca(OH)₂, and 3% solid loading. Compared to raw switchgrass, methane production was enhanced by 14.5%. Additionally, the changes in surface properties and bond structure, along with the kinetic parameters from first order, cone, reaction curve, and modified Gompertz modeling revealed the importance of optimization.

A tailored bifunctional carbon catalyst for efficient glycosidic bond fracture and selective hemicellulose fractionation

This study proposed a mild chlorination-sulfonation approach to synthesize magnetic carbon acid bearing with catalytic SO₃H and adsorption Cl bifunctional sites on polydopamine coating. The catalysts exerted good textural structure and surface chemical properties (i.e., porosity, high specific surface area of >70 m²/g, high catalytic activity with 0.86-1.1 mmol/g of SO₃H sites and 0.8%-1.9% of Cl sites, and abundant hydrophilic functional groups), rendering a maximum cellobiose adsorption efficiency of ∼40% within 6 h. Moreover, the catalysts had strong fracture characteristics on different α-/β-glycosidic bonds with 85.4%-93.9% of disaccharide conversion, while selectively fractionating hemicellulose from wheat straw with 64.3% of xylose yield and 93.4% of cellulose retention. Due to the stable interaction between parent polydopamine support with Fe core and functional groups, the catalysts efficiently recovered by simple magnetic separation had good reusability with minimal losses in catalytic activity.

Recent Advances in the Bioconversion of Waste Straw Biomass with Steam Explosion Technique: A Comprehensive Review

Waste straw biomass is an abundant renewable bioresource raw material on Earth. Its stubborn wooden cellulose structure limits straw lignocellulose bioconversion into value-added products (e.g., biofuel, chemicals, and agricultural products). Compared to physicochemical and other preprocessing techniques, the steam explosion method, as a kind of hydrothermal method, was considered as a practical, eco-friendly, and cost-effective method to overcome the above-mentioned barriers during straw lignocellulose bioconversion. Steam explosion pretreatment of straw lignocellulose can effectively improve the conversion efficiency of producing biofuels and value-added chemicals and is expected to replace fossil fuels and partially replace traditional chemical fertilizers. Although the principles of steam explosion destruction of lignocellulosic structures for bioconversion to liquid fuels and producing solid biofuel were well known, applications of steam explosion in productions of value-added chemicals, organic fertilizers, biogas, etc. were less identified. Therefore, this review provides insights into advanced methods of utilizing steam explosion for straw biomass conversion as well as their corresponding processes and mechanisms. Finally, the current limitations and prospects of straw biomass conversion with steam explosion technology were elucidated.

Production of Polyhydroxyalkanoates through Soybean Hull and Waste Glycerol Valorization: Subsequent Alkaline Pretreatment and Enzymatic Hydrolysis

Alkaline pretreatment and sequential enzymatic hydrolysis of soybean hull were investigated to obtain fermentable sugars for polyhydroxyalkanoates production along with residual glycerol as low-cost carbon sources. Soybean hull is composed of approximately 32% cellulose, 12% hemicellulose, 6% lignin, and 11% protein. Alkaline pretreatment was carried out with 2% NaOH concentration, 10% (w/v) biomass loading, and 60 min incubation time in an autoclave at 120 °C. The response surface methodology (RSM) based on the central composite design (CCD) tool was employed to optimize the enzymatic hydrolysis process, where the variables of biomass loading, enzymes’ concentration, and time were considered. The maximum total reducing sugars concentration obtained was 115.9 g∙L−1 with an enzyme concentration of 11.5 mg protein/g dry substrate for enzyme preparation B1, 2.88 mg protein/g dry substrate for XylA, and 57.6 U/g dry substrate for β-glucosidase, after 42 h at 45 °C, and pH was 4.5. Subsequently, the saccharification step was conducted by increasing the processing scale, using a 1 L tank with stirring with a controlled temperature. Implementing the same enzyme concentrations at pH 4.5, temperature of 45 °C, 260 mL working volume, and incubation time of 42 h, under fed-batch operation with substrate feeding after 14 h and 22 h, a hydrolysate with a concentration of 185.7 g∙L−1 was obtained. Initially, to verify the influence of different carbon sources on Cupriavidus necator DSMz 545 in biomass production, batch fermentations were developed, testing laboratory-grade glucose, soybean hull hydrolysate, and waste glycerol (a by-product of biodiesel processing available in large quantities) as carbon sources in one-factor-at-a-time assays, and the mixture of soybean hull hydrolysate and waste glycerol. Then, the hydrolysate and waste glycerol were consumed by C. necator, producing 12.1 g∙L−1 of biomass and achieving 39% of polyhydroxyalkanoate (PHB) accumulation. To the best of our knowledge, this is the first time that soybean hull hydrolysate has been used as a carbon source to produce polyhydroxyalkanoates, and the results suggest that this agro-industrial by-product is a viable alternative feedstock to produce value-added components.

Effect of steam explosion on nutritional components, physicochemical and rheological properties of brown rice powder

Brown rice powder is underutilized mainly due to its lower starch digestibility and poor processing performance. The present study investigated the potential of steam explosion on the improvement of nutritional and physicochemical characteristic in brown rice powder and rheological property of paste. Compared with native brown rice powder, steam explosion at 0.5 MPa for 7 min increased the water-extractable arabinoxylans (5.77%), reducing sugar content (21.04%), and iodine blue value (30.38%), which indicated steam explosion that destroyed the intact cells of brown rice. Later the crystalline structure of brown rice powder was destroyed into an amorphous structure by steam explosion. Steam explosion enhanced the degree of gelatinization (4.76~351.85%) and solvent retention capacity (SRC) of brown rice powder, compared with native sample. The effect on the intact cells and starch structure of brown rice caused the starch digestibility enhancement remarkable. Viscoelastic profiles confirmed that steam explosion weakened the paste strength and elasticity corresponded with hardness and cohesiveness by increasing the loss factor (tanδ). This work provided important information for brown rice powder modified by steam explosion (0.5 MPa, 7 min) with good nutritional property (nutrients and digestibility) and processability (SRC, textural, and rheological property). Steam exploded brown rice powder (0.5 MPa, 7 min) could serve as a potential ingredient widely used in food products.

Anaerobic Fungi Isolated From Bactrian Camel Rumen Contents Have Strong Lignocellulosic Bioconversion Potential

This study aims to obtain anaerobic fungi from the rumen and fecal samples and investigates their potential for lignocellulosic bioconversion. Multiple anaerobic strains were isolated from rumen contents (CR1–CR21) and fecal samples (CF1–CF10) of Bactrian camel using the Hungate roll tube technique. After screening for fiber degradability, strains from rumen contents (Oontomyces sp. CR2) and feces (Piromyces sp. CF9) were compared with Pecoramyces sp. F1 (earlier isolated from goat rumen, having high CAZymes of GHs) for various fermentation and digestion parameters. The cultures were fermented with different substrates (reed, alfalfa stalk, Broussonetia papyrifera leaves, and Melilotus officinalis) at 39°C for 96 h. The Oontomyces sp. CR2 had the highest total gas and hydrogen production from most substrates in the in vitro rumen fermentation system and also had the highest digestion of dry matter, neutral detergent fiber, acid detergent fiber, and cellulose present in most substrates used. The isolated strains provided higher amounts of metabolites such as lactate, formate, acetate, and ethanol in the in vitro rumen fermentation system for use in various industrial applications. The results illustrated that anaerobic fungi isolated from Bactrian camel rumen contents (Oontomyces sp. CR2) have the highest lignocellulosic bioconversion potential, suggesting that the Bactrian camel rumen could be a good source for the isolation of anaerobic fungi for industrial applications.

Hydrogen Production from Enzymatic Hydrolysates of Alkali Pre-Treated Giant Reed (Arundo donax L.)

The perennial rhizomatous grass giant reed (Arundo donax L.) can be exploited to produce hydrogen by dark fermentation. This implies a high availability of simple sugars, like glucose and xylose, and, thus, a pre-treatment is necessary to remove lignin and expose the holocellulose to enzymatic attack. This study aimed at evaluating the hydrogen production from giant reed hydrolysates. Giant reed dry meal was pre-treated with diluted NaOH (1.2% weight/weight), then the solid fraction was separated from the alkaline black liquor by filtration, enzymatically hydrolyzed with a cellulase blend (Cellic CTec2), and fermented in mesophilic batch conditions with a microbial consortium derived from pig slurry. The impact on hydrogen yield of initial pH was evaluated by comparing the hydrogen production from hydrolysates with not adjusted (5.3) or adjusted initial pH (8.7) using NaOH or alkaline black liquor. The highest hydrogen yield, 2.0 mol/mol of hexoses, was obtained with alkaline initial pH 8.7, regardless of how the pH adjustment was managed. The yield was 39% higher than that obtained in reactors with initial pH 5.3. In conclusion, thermo-alkaline pre-treatment followed by enzymatic saccharification and initial pH adjustment at 8.7 with the black liquor remaining after pre-treatment is a promising strategy to produce hydrogen from giant reeds in dark fermentation.

Production of butanol from lignocellulosic biomass: recent advances, challenges, and prospects

Due to energy and environmental concerns, biobutanol is gaining increasing attention as an alternative renewable fuel owing to its desirable fuel properties. Biobutanol production from lignocellulosic biomass through acetone-butanol-ethanol (ABE) fermentation has gained much interest globally due to its sustainable supply and non-competitiveness with food, but large-scale fermentative production suffers from low product titres and poor selectivity. This review presents recent developments in lignocellulosic butanol production, including pretreatment and hydrolysis of hemicellulose and cellulose during ABE fermentation. Challenges are discussed, including low concentrations of fermentation sugars, inhibitors, detoxification, and carbon catabolite repression. Some key process improvements are also summarised to guide further research and development towards more profitable and commercially viable butanol fermentation.

Experimental optimization of enzymatic and thermochemical pretreatments of bread waste by central composite design study for bioethanol production

The present study aimed at optimizing the combined effect of enzymatic and thermo-chemical pretreatment hydrolysis of bread waste (BW) for enhancing the yield of reducing sugars (RS). Statistical optimization of enzymatic and thermochemical pretreatment processes was performed using the central composite design (CCD) tool of response surface methodology (RSM) using four process parameters (waste bread ratio, alpha-amylase concentration, temperature and pH) on total sugars yield as response variable. It was found that the optimal conditions for maximally RS yield were at bread ratio of 0.03 g/mL, alpha-amylase concentration of 0.2 mL/L, temperature of 100 °C and pH 5.3. Under these conditions, the yield of RS reached 90%, with bioethanol concentration of about 85.8 g/L after 72 h of batch fermentation. The modified Gompertz equation was used to describe the cumulative bioethanol production. A good agreement was found between simulated and experimental data.

Structural Properties and Hydrolysability of Paulownia elongate: The Effects of Pretreatment Methods Based on Acetic Acid and Its Combination with Sodium Sulfite or Sodium Sulfite

The effects of CH₃COOH and Na₂SO₃ pretreatment on the structural properties and hydrolyzability of fast-growing Paulownia elongate were investigated. Acetic acid increased cellulose’s crystallinity and hydrolyzability when combined with alkaline sodium sulfite and sodium hydroxide. The cellulose content increased by 21%, the lignin content decreased by 6%, and the product showed better enzymatic digestibility. With a cellulase dose of 30 FPU/g DM, after 72 h hydrolysis, the hydrolysis yields of glucose and xylose were 78% and 83%, respectively, which were 51% and 69% higher than those of untreated materials. When the enzyme dosage was 20 FPU/g DM, after 72 h hydrolysis, the hydrolysis yields of glucose and xylose were 74% and 79%, respectively. The high hydrolyzability, low enzyme loading, and high hydrolysis yield demonstrate the potential of the proposed system for producing platform sugars from fast-growing Paulownia elongate.

Production of Cellulose Nano-Fibers and Its Application in Poly-Lactic-Acid: Property Improvement by New Types of Coupling Agents

Poly-lactic-acid is a biopolymer that can be an attractive alternative to replace petroleum-based polymers. It has advanced mechanical properties, melts easily with less energy consumption, and can be used to produce biodegradable plastics using renewable sources. However, some of the properties of poly-lactic-acid are inferior to those of traditional polymers: e.g., intensive farming is necessary for high agricultural yield, the composting needs special conditions, it is difficult to blend with other commonly used plastics, expensive, high permeability, etc. Therefore, the present work seeks to improve the structure and mechanical properties of the poly-lactic-acid incorporated by cellulose nano-fibers obtained from rice straw by a chemical acidic treatment. The fibers were incorporated into the poly-lactic-acid polymer matrix in a concentration of 1% by two-roll mill. To improve the incorporation of the fibers in the matrix, different coupling agents were used: PE-g-MA, vinyl trimethoxy silane, polyethylene-glycol with different molecular weight, and two types of experimentally synthetized α-olefin-maleic anhydride-based copolymers. The properties of the final composite could be improved, however those depend on the coupling agent to be used. The improving effect of the tested chemicals had been depended on the temperature. Based on structure analysis, both chemical and physical interactions were proposed between the cellulose nanofiber and polymer matrix. The thermogravimetric and viscosity results well represented the softener effect of the used chemical agents.

A hydrotrope pretreatment for stabilized lignin extraction and high titer ethanol production

The biomass pretreatment strategies using organic acids facilitate lignin removal and enhance the enzymatic digestion of cellulose. However, lignin always suffers a severe and irreversible condensation. The newly generated C-C bonds dramatically affect its further upgrading. In this study, we used a recyclable hydrotrope (p-Toluenessulfonic acid, p-TsOH) to dissolve lignin under mild condition and stabilized lignin with a quenching agent (formaldehyde, FA) during extraction, achieving both value-added lignin extraction and efficient enzymatic saccharification of cellulose. Approximately 63.7% of lignin was dissolved by 80% (wt. %) p-TsOH with 1.5% FA addition at 80 °C, 30 min. The obtained lignin was characterized by FTIR spectroscopy, TGA, 2D HSQC NMR spectroscopy, and GPC. The results indicated that the extracted lignin exhibited excellent properties, such as light color, a low molecular weight (Mw, 5371 g/mol), and a narrow polydispersity (Mw/Mn, 1.63). The pretreated substrate was converted to ethanol via a quasi-simultaneous saccharification and fermentation process (Q-SSF). After fermentation of 60 h, the ethanol concentration reached 38.7 ± 3.3 g/L which was equivalent to a theoretical ethanol yield of 82.9 ± 2.2% based on the glucan content, while the residual glucose concentration was only 4.69 ± 1.4 g/L. In short, this pretreatment strategy protected lignin to form new C-C linkages and improved the enzymatic saccharification of glucan for high-titer ethanol production.

Production of single cell oil by Yarrowia lipolytica JCM 2320 using detoxified desiccated coconut residue hydrolysate

Nowadays, the replacement of petro-diesel with biodiesel has raised the concern among the community for the utilization of improper feedstocks and the cost involved. However, these issues can be solved by producing single cell oil (SCO) from lignocellulosic biomass hydrolysates by oleaginous microorganisms. This study introduced Yarrowia lipolytica JCM 2320 with a desiccated coconut residue (DCR) hydrolysate (obtained from the 2% dilute sulphuric acid pretreatment) as a carbon source in generating SCO. However, common inhibitors formed during acid pretreatment of biomass such as five-hydroxymethylfurfural (HMF), furfural, acetic acid and levulinic acid resulting from the sugar degradations may have detrimental effects towards the fermentation process. To visualize the effect of inhibitors on Y. lipolytica, an inhibitory study was conducted by adding 0.5-5.0 g/L of potential inhibitors to the YPD (yeast, peptone and D-glucose) medium. It was found that the presence of furfural at 0.5 g/L would increase the lag phase, which beyond that was detrimental to Y. lipolytica. Furthermore, increasing the five-hydroxymethylfurfural (HMF) concentration would increase the lag phase of Y. lipolytica, whereas, for acetic acid and levulinic acid, it showed a negligible effect. Detoxification was hence conducted to remove the potential inhibitors from the DCR hydrolysate prior its utilization in the fermentation. To examine the possibility of using adsorption resins for the detoxification of DCR hydrolysate, five different resins were tested (Amberlite® XAD-4, Amberlite® XAD-7, Amberlite® IR 120, Amberlite® IRA 96 and Amberlite® IRA 402) with five different concentrations of 1%, 3%, 5%, 10% and 15% (w/v), respectively. At resin concentration of 10%, Amberlite® XAD-4 recorded the highest SCO yield, 2.90 ± 0.02 g/L, whereas the control and the conventional overliming detoxification method, recorded only 1.29 ± 0.01 g/L and 1.27 ± 0.02 g/L SCO accumulation, respectively. Moreover, the fatty acid profile of the oil produced was rich in oleic acid (33.60%), linoleic acid (9.90%), and palmitic acid (14.90%), which indicates the potential as a good biodiesel raw material.

Utilization of lignin upon successive fractionation and esterification in polylactic acid (PLA)/lignin biocomposite

The study presents the preparation of novel biocomposites based on different lignin fractions and polylactic acid (PLA). The lignin was extracted from pine residue using deep eutectic solvent (DES) and was subjected to fractionation with ethanol and acetone as well as esterification modification with succinic anhydride (SAn). Different lignin fractions were characterized and analyzed, while lignin-based biocomposites were prepared by melt injection. The results showed that lignin molecular weight was inversely proportional to the phenolic hydroxyl content and positively proportional to the alcohol hydroxyl group. The mechanical properties of the composites were also significantly affected by different molecular weights of lignin, indicating that the non-homogeneity of lignin affects its value-added utilization. In contrast to other performances of composites, the flexural and impact strengths of the materials prepared by acetone extracted lignin (AL) were improved by 18.2% and 28%, respectively, while the antibacterial properties against Staphylococcus aureus were up to 95%. The enhanced mechanical properties, antibacterial effect, and steady biocompatibility provide potential possibilities for lignin-based composites in biomedical applications.

Comparison of three ionic liquids pretreatment of Arundo donax L. For enhanced photo-fermentative hydrogen production

Ionic liquids (ILs) pretreatment has been regarded as a promising green way to treat lignocellulosic biomass. 1-Butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄), 1-allyl-3-methylimidazolium chloride ([Amim]Cl), and 1-Butyl-3-methylimidazolium Hydrogen Sulfate ([Bmim]HSO₄) with different loadings (2, 4, 8, and 16 g/L) were adopted to pretreat the Arundo donax L.. 16 g/L [Bmim]HSO₄ pretreated Arundo donax L. obtained the highest sugar yield of 7.9 g/L during the enzymatic hydrolysis and hydrogen yield of 106.1 mL/g TS during the photo-fermentation, which were 68.8 % and 35.3 % higher than those of untreated Arundo donax L., respectively. Moreover, volatile fatty acids (VFAs) distribution revealed that acetic acid was the main by-product during hydrogen production process with ILs pretreated Arundo donax L.. Besides, the relationship between sugar yield and hydrogen yield was the closest based on scatter matrix analysis. This study helps to understand of correlation between ILs pretreatment with the behavior of bioenergy production.

Hydrothermal pretreatment for the production of oligosaccharides: A review

Oligosaccharides are low-molecular-weight carbohydrates with crucial physical, chemical, and physiological properties, which are increasingly important in the fields of food, pharmaceuticals, cosmetics, and biomedicine. Pretreating biomass in a cost-effective way is a significant challenge for oligosaccharides research. Hydrothermal pretreatment is a potentially eco-friendly technology to obtain oligosaccharides by deconstructing biomass. In this work, we compared the differences between hydrothermal pretreatment and the traditional pretreatment method. The fundamentals and classification of hydrothermal pretreatment, as well as the latest studies on hydrothermal preparation of oligosaccharides, were further reviewed and evaluated to provide a theoretical basis for the production and application of oligosaccharides. Some challenges and future trends to develop green and large-scale hydrothermal pretreatment were proposed for the production of oligosaccharides.

Recyclable Zr/Hf-Containing Acid-Base Bifunctional Catalysts for Hydrogen Transfer Upgrading of Biofuranics: A Review

The massive burning of a large amount of fossil energy has caused a lot of serious environmental issues (e.g., air pollution and climate change), urging people to efficiently explore and valorize sustainable alternatives. Biomass is being deemed as the only organic carbon-containing renewable resource for the production of net-zero carbon emission fuels and fine chemicals. Regarding this, the selective transformation of high-oxygen biomass feedstocks by catalytic transfer hydrogenation (CTH) is a very promising strategy to realize the carbon cycle. Among them, the important Meerwein-Ponndorf-Verley (MPV) reaction is believed to be capable of replacing the traditional hydrogenation strategy which generally requires high-pressure H2 and precious metals, aiming to upgrade biomass into downstream biochemical products and fuels. Employing bifunctional heterogeneous catalysts with both acidic and basic sites is needed to catalyze the MPV reaction, which is the key point for domino/cascade reaction in one pot that can eliminate the relevant complicated separation/purification step. Zirconium (Zr) and hafnium (Hf), belonging to transition metals, rich in reserves, can demonstrate similar catalytic efficiency for MPV reaction as that of precious metals. This review introduced the application of recyclable heterogeneous non-noble Zr/Hf-containing catalysts with acid-base bifunctionality for CTH reaction using the safe liquid hydrogen donor. The corresponding catalysts were classified into different types including Zr/Hf-containing metal oxides, supported materials, zeolites, metal-organic frameworks, metal-organic hybrids, and their respective pros and cons were compared and discussed comprehensively. Emphasis was placed on evaluating the bifunctionality of catalytic material and the key role of the active site corresponding to the structure of the catalyst in the MPV reaction. Finally, a concise summary and prospect were also provided centering on the development and suggestion of Zr/Hf-containing acid-base bifunctional catalysts for CTH.

Emerging trends in high-solids enzymatic saccharification of lignocellulosic feedstocks for developing an efficient and industrially deployable sugar platform

For the techno-commercial success of any lignocellulosic biorefinery, the cost-effective production of fermentable sugars for the manufacturing of bio-based products is indispensable. High-solids enzymatic saccharification (HSES) is a straightforward approach to develop an industrially deployable sugar platform. Economic incentives such as reduced capital and operational expenditure along with environmental benefits in the form of reduced effluent discharge makes this strategy more lucrative for exploitation. However, HSES suffers from the drawback of non-linear and disproportionate sugar yields with increased substrate loadings. To overcome this bottleneck, researchers tend to perform HSES at high enzyme loadings. Nonetheless, the production costs of cellulases are one of the key contributors that impair the entire process economics. This review highlights the relentless efforts made globally to attain a high-titer of sugars and their fermentation products by performing efficient HSES at low cellulase loadings. In this context, technical innovations such as advancements in new pretreatment strategies, next-generation cellulase cocktails, additives, accessory enzymes, novel reactor concepts and enzyme recycling studies are especially showcased. This review further covers new insights, learnings and prospects in the area of lignocellulosic bioprocessing.

Recent advances in green solvents for lignocellulosic biomass pretreatment: Potential of choline chloride (ChCl) based solvents

Biomass wastes exhibit a great potential to be used as a source of non-depleting renewable energy and synthesis of value-added products. The key to the valorization of excess lignocellulosic biomass wastes in the world lies on the pretreatment process to recalcitrant barrier of the lignocellulosic material for the access to useful substrates. A wide range of pretreatment techniques are available and advances in this field is continuously happening, in search for cheap, effective, and environmentally friendly methods. This review starts with an introduction to conventional approaches and green solvents for pretreatment of lignocellulosic biomass. Subsequently, the mechanism of actions along with the advantages and disadvantages of pretreatment techniques were reviewed. The roles of choline chloride (ChCl) in green solvents and their potential applications were also comprehensively reviewed. The collection of ideas in this review serve as an insight for future works or interest on biomass-to-energy conversion using green solvents.

Integrating chemical and biological catalysis for simultaneous production of polyphenolics and butyric acid from waste pomegranate peels

Pomegranate peels are an abundant agricultural waste material with a high content of carbohydrates and bioactive compounds. The aim of this study was to efficiently convert waste pomegranate peels (WPP) into high-value-added products. First, high yields of phenolics (12.2%) and bioactive pectin (24.8%) were obtained via enzymatic pretreatment. The lignin was subsequently degraded using an integrated method combining heteropolyacids as catalyst and biomass-derived γ-valerolactone as sustainable solvent and cellulase-catalyzed hydrolysis. The optimal degradation conditions were found to encompass a temperature of 293 K, reaction time of 3 h and catalyst loading with 30 mM heteropolyacids. Under these conditions, the enzymatic hydrolysis efficiency was enhanced significantly, leading to a yield of 93.3% glucose from the obtained cellulosic feedstock. Finally, the fermentable sugars together with the previously recovered pectin from WPP were firstly used as carbon source to evaluate their suitability as feedstock for butyric acid production using Clostridium tyrobutyricum.

Effects of granular activated carbon and temperature on the viscosity and methane yield of anaerobically digested of corn straw with different dry matter concentrations

Anaerobic digestion (AD) systems with high substrate concentrations are characterized by high viscosity, which affects material and energy transfer efficiencies, thereby influencing methane production efficiency. In this study, adding granular activated carbon (GAC) and increasing the temperature decreased the viscosity by 4.56-10.19% and 27.13-28.85%, respectively, and improved AD efficiency. Adding GAC and increasing the temperature enhanced the methane yields by 34.37-38.15% and 25.60-28.31%, respectively. Distance-based redundancy analysis showed that the viscosity, temperature, and GAC had the greatest effects on the composition of the microbial community. The dominant bacteria in the medium-temperature AD system at the phylum level belonged to Firmicutes, Bacteroidetes, and Euryarchaeota. In addition to the dominant bacteria in the medium-temperature AD system, the thermophilic phylum Thermotogae was abundant in the high-temperature AD system. Moreover, the relative abundance of Euryarchaeota, which contained most of the methanogens, was higher in the high-temperature AD system than in the medium-temperature AD system.

Advances in Pretreatment of Straw Biomass for Sugar Production

Straw biomass is an inexpensive, sustainable, and abundant renewable feedstock for the production of valuable chemicals and biofuels, which can surmount the main drawbacks such as greenhouse gas emission and environmental pollution, aroused from the consumption of fossil fuels. It is rich in organic content but is not sufficient for extensive applications because of its natural recalcitrance. Therefore, suitable pretreatment is a prerequisite for the efficient production of fermentable sugars by enzymatic hydrolysis. Here, we provide an overview of various pretreatment methods to effectively separate the major components such as hemicellulose, cellulose, and lignin and enhance the accessibility and susceptibility of every single component. This review outlines the diverse approaches (e.g., chemical, physical, biological, and combined treatments) for the excellent conversion of straw biomass to fermentable sugars, summarizes the benefits and drawbacks of each pretreatment method, and proposes some investigation prospects for the future pretreatments.

Potential Valorization of Hazelnut Shells through Extraction, Purification and Structural Characterization of Prebiotic Compounds: A Critical Review

Hazelnuts are one of the most widely consumed nuts, but their production creates large quantities of by-products, especially shells, that could be upcycled into much more valuable products. Recent studies have shown that hazelnut shell hemicellulose is particularly rich in compounds that are potential precursors of xylooligosaccharides and arabino-xylooligosaccharides ((A)XOS), previously defined as emerging prebiotics very beneficial for human health. The production of these compounds on an industrial scale-up could have big consequences on the functional foods market. However, to produce (A)XOS from a lignocellulosic biomass, such as hazelnut shell, is not easy. Many methods for the extraction and the purification of these prebiotics have been developed, but they all have different efficiencies and consequences, including on the chemical structure of the obtained (A)XOS. The latter, in turn, is strongly correlated to the nutritional effects they have on health, which is why the optimization of the structural characterization process is also necessary. Therefore, this review aims to summarize the progress made by research in this field, so as to contribute to the exploitation of hazelnut waste streams through a circular economy approach, increasing the value of this biomass through the production of new functional ingredients.