Chitosan/organic rectorite composite for the magnetic uptake of methylene blue and methyl orange

Novel amino-ethyl carboxymethyl cellulose crosslinked ampholyte hydrogel development for Methyl orange removal from waste water

In the modern era, with the rapid growth of various industries, the issues of energy crisis and environmental pollution have garnered increasing attention. One significant source of industrial pollution is printing and dyeing wastewater. This wastewater often contains dyes that have aromatic structures and azo groups, such as Methyl orange (MO), which are both toxic and difficult to degrade. If these dyes are released into the wastewater stream without any treatment, they can have adverse effects on ecological balance and human health. Therefore, it is crucial to identify suitable treatment strategies to efficiently remove dyes from wastewater systems before discharge. In this study, the Methyl orange (MO) azo dye has been removed from dyes-contaminated wastewater, for the first time, using a novel amino-ethyl carboxymethyl cellulose crosslinked ampholyte hydrogel (AECMC). Different characterization methods, including FTIR, TGA, and DSC were used to characterize the generated AECMC compounds. The water absorption and cationic exchange capacities were assessed. Factors affecting the MO anions adsorption including MO concentration, adsorption pH, temperature, time, adsorbent dose, and agitation speed have been investigated. Moreover, the kinetics of the adsorption process was assessed by the use of three models: pseudo-first-order, Pseudo-second-order, and Elovich. Moreover, the mechanism of the adsorption process was monitored using the Intraparticle diffusion and Boyd models. Additionally, the adsorption isotherm was examined using established models such as Langmuir, Freundlich, and Temkin isotherms. The thermodynamic characteristics of the MO adsorption process have been investigated at various adsorption temperatures using the Van't Hoff model. The results obtained from the study indicate that the process of MO adsorption adhered to the Pseudo-second-order kinetic model, the Langmuir isotherm model was found to be applicable, and spontaneous and exhibited an endothermic character. In conclusion, the developed novel amino-ethyl carboxymethyl cellulose crosslinked ampholyte hydrogels (AECMC) have successive in the removal of the MO anionic dye from contaminated wastewater.

Sorption behavior of chitosan nanoparticles for single and binary removal of cationic and anionic dyes from aqueous solution

In this study, chitosan nanoparticles (ChNs) were used as an adsorbent for single and simultaneous uptake of cationic (methylene blue (MB)) and anionic (methyl orange (MO)) dyes. ChNs were prepared based on the ionic gelation method using sodium tripolyphosphate (TPP) and characterized by zetasizer, FTIR, BET, SEM, XRD, and pHPZC. The studied parameters that affect removal efficiency included pH, time, and dyes' concentration. The results showed that in single-adsorption mode, the removal of MB is better in alkaline pH, contrary to MO uptake which presents higher removal efficiency in acidic media. The simultaneous removal of MB and MO from the mixture solution by ChNs could be achieved under neutral conditions. The adsorption kinetic results showed that adsorption of MB and MO for both single-adsorption and binary adsorption systems comply with the pseudo-second-order model. Langmuir, Freundlich, and Redlich-Peterson isotherms were used for the mathematical description of single-adsorption equilibrium, while non-modified Langmuir and extended Freundlich isotherms were used to fit the co-adsorption equilibrium results. The maximum adsorption capacities of MB and MO in a single dye adsorption system were 315.01 and 257.05 mg/g for MB and MO, respectively. On the other hand, and for binary adsorption system, the adsorption capacities were 49.05 and 137.03 mg/g, respectively. The adsorption capacity of MB decreases in solution containing MO and vice versa, suggesting an antagonistic behavior of MB and MO on ChNs. Overall, ChNs could be a candidate for single and binary removal of MB and MO in dye-containing wastewater.

Biopolymer Meets Nanoclay: Rational Fabrication of Superb Adsorption Beads from Green Precursors for Efficient Capture of Pb(II) and Dyes

Renewable, green, and safe natural biopolymer-derived materials are highly desired for the purification of pollutants, but significantly improving their performance without the introduction of additional harmful chemicals remains a huge challenge. Based on the concept of "structure optimization design", environment-friendly composite beads (named SA/PASP/RE) with excellent adsorption performance and recyclability were rationally constructed through a green ionic crosslinking route, using the completely green biopolymer sodium alginate (SA), sodium salt of polyaspartic acid (PASP), and the natural nanoclay rectorite (RE) as starting materials. The nano-layered RE was embedded in the polymer matrix to prevent the polymer chain from becoming over-entangled so that more adsorption sites inside the polymer network were exposed, which effectively improved the mass transfer efficiency of the adsorbent and the removal rate of contaminants. The composite beads embedded with 0.6% RE showed high adsorption capacities of 211.78, 197.13, and 195.69 mg/g for Pb(II) and 643.00, 577.80, and 567.10 mg/g for methylene blue (MB) in Yellow River water, Yangtze River water, and tap water, respectively. And the beads embedded with 43% RE could efficiently adsorb Pb(II) and MB with high capacities of 187.78 mg/g and 586.46 mg/g, respectively. This study provides a new route to design and develop a green, cost-effective, and efficient adsorbent for the decontamination of wastewater.

Optimizing magnetic, dielectric, and antimicrobial performance in chitosan-PEG-Fe2O3@NiO nanomagnetic composites

There is a growing interest in eco-friendly and cost-effective organic-inorganic nanocomposites due to their alignment with the principles of "green" chemistry, as well as their biocompatibility and non-toxicity. This study focused on producing Chitosan-PEG-Fe2O3@NiO nanomagnetic composites to improve the stability, dielectric properties, and antimicrobial effectiveness of these nanocomposite materials. The process involved synthesizing Fe2O3@NiO via sol-gel and polymerizing chitosan-PEG. The nanocomposites were characterized by XRD, TEM, FTIR, optical, dielectric, and VSM. Incorporating Fe2O3@NiO significantly improved stability, and the interaction with Fe2O3 during the sol-gel process facilitated the formation of NiFe2O4 with an increase in the crystallinity within the chitosan-PEG matrix. The study examined optical and dielectric properties, highlighting that the 3 NiO-doped chitosan-PEG-Fe2O3 composites had high electrical conductivity (1.8 ∗ 10-3 S/cm) and a significant dielectric constant (106 at low frequencies). As the ratio of NiO NPs within the chitosan-PEG-Fe2O3 increases, the energy band gap of chitosan-PEG-Fe2O3 films decreases up to 3.7 eV. This decrease is owing to the quantum confinement effect. These composites also demonstrated improved antimicrobial activity against E. coli and S. aureus and higher activity in the presence of nanomagnetic particles. The minimum inhibitory concentrations of CS-PEG-Fe2O3/NiO NPs against (Bacillus cereus, M. luteus, S. aureus and (S. enterica, H. pylori, E. coli) were (22-35 mm) and (21-34 mm), respectively.

Development of novel amino-ethyl chitosan hydrogel for the removal of methyl orange azo dye model

The present study introduces a new and straightforward method for the amination of Chitosan. This method involves coupling Chitosan (CS) with 2-chloroethylamine (ENH2) in a single step to produce an amino-ethyl Chitosan derivatives with increased amine group content (CS-ENH2) using click chemistry. The resulting derivatives were then crosslinked using Glutaraldehyde to form amino-ethyl Chitosan Schiff bases. The novel amino-ethyl Chitosan Schiff bases were subsequently utilized as adsorbents for the removal of Methyl Orange (MO) dye from aqueous solutions using a batch technique, and the performance of the produced Schiff bases was compared with that of the native Chitosan Schiff base. The CS-ENH2 adsorbents show improved adsorption capacity up to 300% of the native Chitosan Schiff base with almost double removal rate. The adsorption temperature has a positive impact in general while almost 100% of MO removed at 60 °C using CS-ENH2 adsorbents compared with 66% of the native Chitosan Schiff base adsorbent. The adsorption pH shows a negative impact on the MO removal percent. That effect reduced sharply using the CS-ENH2 adsorbents with higher amination degree while the MO removal percent almost being constant over a wide range of pH; 2.0-7.0. The agitation speed has the same positive effect over all the adsorbents. However, the rate of MO removal percent decreased with increase the agitation speed up to 250 rpm. The experimental findings demonstrated that the highest percentage of MO dye removal was achieved under the conditions of pH 2.0, a temperature of 60 °C, agitation speed of 250 rpm, and adsorption duration of 90 min. These Schiff bases were subsequently characterized using advanced analytical techniques including Fourier Transform Infrared spectroscopy, Thermal analysis (TGA and DSC), and Scanning Electron Microscopy.

Hybrid Polymer-Silica Nanostructured Materials for Environmental Remediation

Due to the ever-growing global population, it is necessary to develop highly effective processes that minimize the impact of human activities and consumption on the environment. The levels of organic and inorganic contaminants have rapidly increased in recent years, posing a threat to ecosystems. Removing these toxic pollutants from the environment is a challenging task that requires physical, chemical, and biological methods. An effective solution involves the use of novel engineered materials, such as silica-based nanostructured materials, which exhibit a high removal capacity for various pollutants. The starting materials are also thermally and mechanically stable, allowing for easy design and development at the nanoscale through versatile functionalization procedures, enabling their effective use in pollutant capture. However, improvements concerning mechanical properties or applicability for repeated cycles may be required to refine their structural features. This review focuses on hybrid/composite polymer-silica nanostructured materials. The state of the art in nanomaterial synthesis, different techniques of functionalization, and polymer grafting are described. Furthermore, it explores the application of polymer-modified nanostructured materials for the capture of heavy metals, dyes, hydrocarbons and petroleum derivatives, drugs, and other organic compounds. The paper concludes by offering recommendations for future research aimed at advancing the application of polymer-silica nanostructured materials in the efficiency of pollutant uptake.

Chitosan-based composite hydrogel with a rigid-in-flexible network structure for pH-universal ultra-efficient removal of dye

Polysaccharide-based hydrogel adsorbents become popular because of their high adsorption capacity and fast adsorption rate, but their low removal rate and poor pH resistance have always been fatal shortcomings. Herein, a feasible strategy was proposed to strengthen the ability of hydrogel adsorbent to remove organic pollutants (i.e., dye) by incorporating natural rectorite (REC) into chitosan-g-poly (2-acrylamido-2-methyl-propane-sulfonic-acid) hydrogel network to form a rectorite-in-polymer network structure. The introduction of less dosage of REC (1.2 wt%) into the hydrogel facilitates to improve its adsorption capacities toward methylene blue (MB) in deionized water, tap water, seawater, Yangtze River water, and Yellow River water (1083.39-1303.49 mg/g); while incorporating higher content of REC (15.8 wt% REC) helps to improve the removal rate (99.6 % for MB in real waters), which are greatly superior to commercial activated carbons. The adsorbent keeps high adsorption efficiency in a broad pH range (2-11), and can be reused for >4 times.

Adsorption profile of anionic and cationic dyes through Fe3O4 embedded oxidized Sterculia gum/Gelatin hybrid gel matrix

Hazardous effluents from textile industries being major contributors of water pollution and impose potential adverse effects on environment. In present study, Fe₃O₄ embedded oxidized Sterculia gum/Gelatin hybrid matrix have been fabricated and evaluated for enrichment of methyl orange (MO) and methylene blue (MB). Newly synthesized matrix was characterized through powdered XRD, FTIR, FESEM, TEM and TGA. Integrated nanoparticles improved dye enrichment and facilitated removal of matrix from the aqueous solution under the influence of magnetic field. Influence of various reaction parameters viz.: contact time, adsorbent dose, initial dye concentration, temperature & pH of the adsorption medium on dye enrichment have been evaluated. Maximum adsorption (90 % and 88 % for MO and MB respectively) has been achieved. Langmuir, Freundlich and Tempkin adsorption isotherms have been evaluated. Experimental results validate well fitted Freundlich isotherm for MO and Temkin isotherm for MB. Adsorption kinetics has been analyzed through Pseudo first order, second order kinetic and intra particle diffusion models. Adsorption of both dyes was best explained via pseudo second order kinetic model. Negative value of Gibb's free energy change (-26.487 KJ mol ^-1 and - 24.262 KJ mol ^-1) for MB and MO at 303 K was an indication of spontaneity of the reaction.

Preparation of alkali lignin extracted from ligno-cellulosic populus tremula fibers: Application to copper oxide nanoparticles synthesis, characterization, and methylene blue biosorption study

The green synthesis of nanoparticles using biogenic approaches constitutes a challenge for effective applications. The massive aliphatic hydroxyl groups of lignin exhibited excellent reduction properties allowing the production of metallic nanoparticles. In this work, alkali lignin was extracted from virgin populus tremula and used for the preparation of copper oxide nanoparticles. The analysis of the prepared nanoparticles was assessed using Fourier Transform Infra-red (FT-IR), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray spectroscopy (EDX), and Transmission Electron Microscopy (TEM). FT-IR results displayed that different phytochemicals constituents of lignin extract were responsible for the production of CuO nanoparticles. XRD information demonstrated monoclinic CuO nanoparticles with a mean size of 12.4 nm. SEM images showed that some nanoparticles were quite separated from each other and some of them were agglomerated due to the oxidation of metal nanoparticles. TEM photos indicated that the overlap of the nanoparticles resulted in rectangular patterns due to the presence of lignin on the surface of CuO nanoparticles. Finally, the prepared CuO nanoparticles were applied for the removal of methylene blue from water. The results showed that the maximum adsorption capacity reached 85 mg/g at the following conditions: T = 20 °C, pH = 6, and time = 60 min.

Magnetized inulin by Fe3O4 as a bio-nano adsorbent for treating water contaminated with methyl orange and crystal violet dyes

Current work focuses on fabricating a new bio-nano adsorbent of Fe₃O₄@inulin nanocomposite via an in-situ co-precipitation procedure to adsorb methyl orange (MO) and crystal violet (CV) dyes from aqueous solutions. Different physical characterization analyses verified the successful fabrication of the magnetic nanocomposite. The adsorbent performance in dye removal was evaluated by varying initial dye concentration, adsorbent dosage, pH and temperature in 5110 mg/L, 0.10.8 g/L, 111 and 283-338 K, respectively. Due to the pH of zero point of charge and intrinsic properties of dyes, the optimum pHs were 5 and 7 for MO and CV adsorption, respectively. The correlation of coefficient (R²) and reduced chi-squared value were the criteria in order to select the best isotherm and kinetics models. The Langmuir model illustrated a better fit for the adsorption data for both dyes, demonstrating the maximum adsorption capacity of 276.26 and 223.57 mg/g at 338 K for MO and CV, respectively. As well, the pseudo-second-order model showed a better fitness for kinetics data compared to the pseudo-first-order and Elovich models. The thermodynamic parameters exhibited that the dye adsorption process is endothermic and spontaneous, which supported the enhanced adsorption rate by increasing temperature. Moreover, the nanocomposite presented outstanding capacity and stability after 6 successive cycles by retaining more than 87% of its initial dye removal efficiency. Overall, the magnetized inulin with Fe₃O₄ could be a competent adsorbent for eliminating anionic and cationic dyes from water.

In-situ hydrothermal synthesis of CNT decorated by nano ZnS/CuO for simultaneous removal of acid food dyes from binary water samples

The zinc sulfide/copper oxide-carbon nanotube nanocomposite (ZnS/CuO-CNT) was fabricated by using an in-situ hydrothermal synthesis method and was used for simultaneous ultrasound-assisted adsorptive removal of a binary mixture of ponceau 4R (P4R) and tartrazine (TA) acid food dyes from contaminated water. The as-synthesized ZnS/CuO-CNT was described by FESEM, XRD, FTIR, BET, and zeta potential analysis. The results included nested network morphology, high purity with the crystalline structure, oxygen-containing functional groups, mesoporous/micropores texture with cumulate interspace, specific surface area of 106.54 m2 g-1, and zero-point charge (pHzpc) of 5.3. In adsorption experiments, the simultaneous effect of main independent variables, including solution pH, adsorbent dosage, concentration of each dye, temperature, and sonication time on the removal efficiency of dyes was studied systematically using the central composite design (CCD) method based on response surface methodology (RSM). Also, the second-order multivariate equation was presented to determine the relationship between the removal efficiencies of P4R and AT dyes and six independent effective variables. The high correlation coefficient (R2 ≥ 0.99), significant p-value (P < 0.0001), and non-significant lack-of-fit (P > 0.05) showed the high accuracy, and validity of the proposed model to predict the removal efficiency of P4R and TA acid food dyes. The experimental removal efficiency for P4R and TA dyes was found to be 98.45 ± 2.54, and 99.21 ± 2.23, respectively. Also, the Langmuir maximum adsorption capacity for P4R and TA dyes was determined to be 190.1 mg g-1 and 183.5 mg g-1, respectively. Finally, the adsorbent's reusability was tested for six periods and could be reused repeatedly without significant reduction in adsorption performance.

Nanostructured Materials for Water Purification: Adsorption of Heavy Metal Ions and Organic Dyes

Chemical water pollution poses a threat to human beings and ecological systems. The purification of water to remove toxic organic and inorganic pollutants is essential for a safe society and a clean environment. Adsorption-based water treatment is considered one of the most effective and economic technologies designed to remove toxic substances. In this article, we review the recent progress in the field of nanostructured materials used for water purification, particularly those used for the adsorption of heavy metal ions and organic dyes. This review includes a range of nanostructured materials such as metal-based nanoparticles, polymer-based nanomaterials, carbon nanomaterials, bio-mass materials, and other types of nanostructured materials. Finally, the current challenges in the fields of adsorption of toxic materials using nanostructured materials are briefly discussed.

Lightweight and anisotropic cellulose nanofibril/rectorite composite sponges for efficient dye adsorption and selective separation

Constructing lightweight and porous adsorbents which can effectively remove dye contaminants is of great significance in the field of the sewage treatment. In this work, anisotropic cellulose nanofibril (CNF) composite sponges assisted by rectorites are fabricated through directional freeze-drying. The resulted composite sponge exhibits the superior saturated adsorption capacity and removal efficiency of 120.0 mg/g and 96.1% for methylene blue (MB), respectively, which is better than the pure CNF sponge and rectorite powders. This is attributed to the strong electrostatic interaction between CNFs and MB, and good cation exchange property of rectorites inside the three-dimensional (3D) highly porous composite sponge. The MB adsorption process of the composite sponge fits to the pseudo-second-order kinetic model and the Langmuir isotherm model well, which is affected by both boundary layer and intraparticle diffusion, resulting in a theoretical maximum adsorption capacity of 214.6 mg/g. Moreover, it also possesses a selective adsorption capacity for anionic and cationic dyes, which is expected to realize the separation treatment of different dyes according to actual application requirements.

Recent Developments in the Application of Bio-Waste-Derived Adsorbents for the Removal of Methylene Blue from Wastewater: A Review

Over the last few years, various industries have released wastewater containing high concentrations of dyes straight into the ecological system, which has become a major environmental problem (i.e., soil, groundwater, surface water pollution, etc.). The rapid growth of textile industries has created an alarming situation in which further deterioration to the environment has been caused due to substances being left in treated wastewater, including dyes. The application of activated carbon has recently been demonstrated to be a highly efficient technology in terms of removing methylene blue (MB) from wastewater. Agricultural waste, as well as animal-based and wood products, are excellent sources of bio-waste for MB remediation since they are extremely efficient, have high sorption capacities, and are renewable sources. Despite the fact that commercial activated carbon is a favored adsorbent for dye elimination, its extensive application is restricted because of its comparatively high cost, which has prompted researchers to investigate alternative sources of adsorbents that are non-conventional and more economical. The goal of this review article was to critically evaluate the accessible information on the characteristics of bio-waste-derived adsorbents for MB's removal, as well as related parameters influencing the performance of this process. The review also highlighted the processing methods developed in previous studies. Regeneration processes, economic challenges, and the valorization of post-sorption materials were also discussed. This review is beneficial in terms of understanding recent advances in the status of biowaste-derived adsorbents, highlighting the accelerating need for the development of low-cost adsorbents and functioning as a precursor for large-scale system optimization.

Sorptive removal of methylene blue from water by magnetic multi-walled carbon nanotube composites

In the present study, five magnetic multi-walled carbon nanotubes (MMWCNTs) with different diameters were prepared and their performance on the sorptive removal of methylene blue (MB) from water was investigated. Transmission electron microscope, scanning electron microscope, Fourier transform infrared spectrometer, X-ray diffraction, and vibrating sample magnetometer confirm that the surface of these MMWCNTs has been decorated by Fe₃O₄ nanoparticles, which renders the MMWCNTs superparamagnetic. Thus, these MMWCNTs can be easily separated from water after the adsorption. During the adsorption process, pH slightly affected the removal efficiency of MB and the adsorption performed better under weak alkaline conditions. Adsorption kinetics followed the pseudo-second-order kinetic model well, and the Dubinin-Radushkevich model fitted the isotherms best. The maximum adsorption capacity for MB reached 204.2 mg/g, and the values decreased with increasing diameters of MMWCNTs due to decreasing specific surface areas. The thermodynamics parameters indicated the spontaneous and exothermic nature of the adsorption. The reusability test showed that MMWCNTs could be used for 6 cycles without significant loss of the adsorption capacity. And common ions (K⁺, Na⁺, Ca²⁺ and Al³⁺) and SDS in water did not show greatly effects on the removal efficiency of MB. Hence, MMWCNTs prepared in this study could be promising adsorbents for dyes removal from wastewater.

Hydrogels Based on Poly([2-(acryloxy)ethyl] Trimethylammonium Chloride) and Nanocellulose Applied to Remove Methyl Orange Dye from Water

Bio-based hydrogels that adsorb contaminant dyes, such as methyl orange (MO), were synthesized and characterized in this study. The synthesis of poly([2-(acryloyloxy)ethyl] trimethylammonium chloride) and poly(ClAETA) hydrogels containing cellulose nanofibrillated (CNF) was carried out by free-radical polymerization based on a factorial experimental design. The hydrogels were characterized by Fourier transformed infrared spectroscopy, scanning electron microscopy, and thermogravimetry. Adsorption studies of MO were performed, varying time, pH, CNF concentration, initial dye concentration and reuse cycles, determining that when the hydrogels were reinforced with CNF, the dye removal values reached approximately 96%, and that the material was stable when the maximum swelling capacity was attained. The maximum amount of MO retained per gram of hydrogel (q = mg MO g⁻¹) was 1379.0 mg g⁻¹ for the hydrogel containing 1% (w w⁻¹) CNF. Furthermore, it was found that the absorption capacity of MO dye can be improved when the medium pH tends to be neutral (pH = 7.64). The obtained hydrogels can be applicable for the treatment of water containing anionic dyes.

Decolorization of water through removal of methylene blue and malachite green on biodegradable magnetic Bauhinia variagata fruits

Batch sorption experiments were performed to investigate the potential of Bauhinia variagata fruit (BVf) and nano-magnetic Bauhinia variagata fruit (nM-BVf) to remove methylene blue (MB) and malachite green (MG). Equilibrium studies have been carried out using various experimental parameters such as the amount of biosorbent, initial solution concentration, contact time, pH, and temperature. The Langmuir, Freundlich, Scatchard, D-R and Temkin adsorption models were applied for the experimental information of MB and MG. The Freundlich model fits better than the Langmuir model. Freundlich model confirmed the magnificent dye sorption ability; 19.3 mg/g for BVf/MB, 21.2 mg/g for nM-BVf/MB, 19.7 mg/g for BVf/MG, and 30.1 mg/g for nM-BVf/MG. The pseudo-second-order kinetic model displayed a more suitable behavior to the experimental result for the removal of MG and MB. Thermodynamic parameters such as changes in Gibbs free energy (ΔG^o), enthalpy (ΔH^o), and entropy (ΔS^o) were investigated and the fine details in the adsorption system were completed. The conclusion from this study is that the prepared nano biosorbent can be efficient for the removal of cationic dyes from wastewater.

Innovative Magnetite Based Polymeric Nanocomposite for Simultaneous Removal of Methyl Orange and Hexavalent Chromium from Water

One of the most important directions for environmental remediation is the effective removal of dyes and toxic heavy metals from water using newly fabricated nanoadsorbents. Here, magnetic Fe3O4 nanoparticles were combined with nitrogen-containing functional group polymers chitosan (CS) and polypyrrole (ppy) to synthesize a nanocomposite (polypyrrole@magnetic chitosan) useful for removing methyl orange (MO) and hexavalent chromium (Cr (VI)) from water. The physicochemical properties of the nanocomposite were determined using SEM, TEM, XRD, FT–IR, and TGA techniques. The effect of different factors on the adsorption system was studied including the contact time, pH, and the effect of co-existed ions. The kinetic study illustrated that the adsorption fit well with Langmuir isotherm. The maximum adsorption capacity of MO and Cr (VI) was found to be 95 and 105 mg/g, respectively. The reusability of the nanocomposite was studied for up to five cycles using 0.1 M NaOH as eluent with a slight decrease of adsorbent efficiency. Furthermore, the removal mechanism studied suggested the removal of MO via adsorption and Cr (VI) via chemical reduction and adsorption. This study suggests that a ppy@magnetic chitosan nanocomposite is a promising nanoadsorbent for removing MO and Cr (VI) from water.

Characterization and valuable use of Calotropis gigantea seedpods as a biosorbent of methylene blue

In this work, powdered Calotropis gigantea seedpods were characterized and used as biosorbents of methylene blue dye from aqueous solution. FT-IR spectroscopy demonstrated functional groups characteristics of cellulose. Steric exclusion chromatography donated an average molecular weight of 230 kg/mol of the biopolymer. The polymolecularity index value (1.95) proved the good homogeneity of the polysaccharide. Scanning electron microscopy features displayed a homogenous morphology and porous structure. X-ray diffraction patterns showed peaks characteristics of cellulose and non-cellulose compositions. Thermogravimetric analysis/differential thermal analysis displayed exothermal decompositions at 316.9 °C and 456 °C. The maximum biosorption capacity of methylene blue was 88.36 mg/g at pH = 6, time = 60 min, and T = 21 °C. The level was comparable to some other studied agricultural wastes. The adsorption mechanism followed pseudo-second-order and Freundlich models. As it is abundant, available, low-cost, and easily recovered from solution, C. gigantea seedpods could be used as an effective biomaterial for the removal of organic pollutants from contaminated waters. Novelty statement: An abundant, available, and low-cost Calotropis gigantea seedpod was used, for the first time, as an effective biomaterial for the biosorption of organic pollutants. The biosorption level was found to be comparable to some other agricultural wastes studied previously in the literature.

Silver nanoparticles decorated magnetic polymer composites (Fe3O4@PS@Ag) as highly efficient reusable catalyst for the degradation of 4-nitrophenol and organic dyes

A facile and cost-effective preparation of silver nanoparticles decorated magnetic composite for the effective catalytic degradation of 4-nitrophenol (4-NP) and Methylene blue (MB) and Rhodamine B (RhB) was investigated. Fe₃O₄@Polystyrene@Ag (Fe₃O₄@PS@Ag) catalyst was prepared via a two-step procedure. Firstly, carboxyl groups modified magnetic microspheres (Fe₃O₄@PS-COOH) has been successfully synthesized by microemulsion polymerization. Then Ag ions were adsorbed and in-situ reduced on the surface of Fe₃O₄@PS microspheres. To estimate the catalytic activity of Fe₃O₄@PS@Ag catalyst, the reduction experiments of MB, RhB and 4-NP were performed in the presence of NaBH₄. The results indicated that Fe₃O₄@PS@Ag catalyst has a good catalytic performance and these dyes can be reduced in a very short time, which the apparent rate coefficients are 0.0089 s^-1, 0.0187 s^-1 and 0.0086 s^-1 for MB, RhB and 4-NP respectively. In addition, it could be easily collected from aqueous solution by a magnet so that the catalyst could be recovered and reused after the catalytic process. The catalytic activity was still high after seven cycles. This catalytic reaction is in agreement with the pseudo-first-order kinetic equation. Furthermore, the as-prepared Fe₃O₄@PS@Ag catalyst outperforms other catalysts in the degradation of these organic dyes.

Facile Preparation of Self-Assembled Chitosan-Based POSS-CNTs-CS Composite as Highly Efficient Dye Absorbent for Wastewater Treatment

In this work, a new nanocomposite based on octa-amino polyhedral oligomeric silsesquioxanes (POSS), carbon nanotubes (CNTs), and chitosan (CS) was synthesized and used for wastewater treatment. The properties and morphologies of the prepared composite were analyzed by X-ray diffraction, scanning electron microscopy, transmission electron microscope, thermogravimetric, and atomic force microscopy. The results showed that POSS, CNTs, and CS formed a stable composite through intermolecular forces, and the modification of CS by POSS and CNTs improved its stability. In addition, the obtained composite showed good adsorption performance for the degradation of methyl orange and Congo red dyes. The pseudo-first-order model and pseudo-second-order model were used to analyze the adsorption data, and the results showed that the adsorption process conforms to the kinetic model. Moreover, the maximum adsorption capacity of the composite to methyl orange and Congo red reached 63.23 and 314.97 mg/g, respectively. This work provides new ideas for the preparation of self-assembled multi-composite and their potential applications in wastewater treatment.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Chemical structure and mechanism of polysaccharide on Pb2+ tolerance of Cordyceps militaris after Pb2+ domestication

In this study, the purified polysaccharide (DCP-I) was extracted from Cordyceps militaris domesticated with Pb²⁺. After that, the structural feature and mechanism of lead resistance of DCP-I were investigated using novel approaches. The results showed that the average molecular weight of DCP-I was 1.206 × 10³ kDa and mainly consist of Rhamnose, Galactose, Glucose, Galacturonic acid and Glucuronic acid in a molar ratio of 0.130:47.687:40.784:1.795:0.48. Besides, the main chain of DCP-I was composed by →6)-Galp-(1→, →4)-Glcp-(1→ and →1,4)-Glcp-(6→, while the side chain was →1)-Rhaf-(2→ and D-Glcp-(1→, and the DCP-I contained Alacturonic acid and Glucuronic acid. In addition, the result of Congo red test showed that DCP-I did not exist triple-helical structures. SEM, EDX and XPS analyses results showed that the functional groups of DCP-I related to C, H and O (-OH, -COOH and -C=O) could combined with Pb²⁺effectively. The adsorption processes were described by the Pseudo-second-order kinetic model (R² = 0.9978) and Langmuir isotherm (R² = 0.9979) for Pb²⁺ indicating that adsorption process of DCP-I to Pb²⁺ was a kind of single molecular layer chemical adsorption.

A Cellulosic Fruit Derived from Nerium oleander Biomaterial: Chemical Characterization and Its Valuable Use in the Biosorption of Methylene Blue in a Batch Mode

Cellulose substrate waste has demonstrated great potential as a biosorbent of pollutants from contaminated water. In this study, Neriumoleander fruit, an agricultural waste biomaterial, was used for the biosorption of methylene blue from synthetic solution. Fourier-transform infrared (FTIR) spectroscopy indicated the presence of the main absorption peak characteristics of cellulose, hemicellulose, and lignin compositions. X-ray diffraction (XRD) pattern exhibited peaks at 2θ = 14.9° and 2θ = 22°, which are characteristics of cellulose I. Scanning electron microscopy (SEM) showed a rough and heterogeneous surface intercepted by some cavities. Thermogravimetric analysis (TGA) showed more than a thermal decomposition point, suggesting that Nerium fruit is composed of cellulose and noncellulosic matters. The pH_pzc value of Nerium surface was experimentally determined to be 6.2. Nerium dosage, pH, contact time, dye concentration, and temperature significantly affected the adsorption capacity. The adsorption capacity reached 259 mg/g at 19 °C. The mean free energy ranged from 74.53 to 84.52 KJ mol⁻¹, suggesting a chemisorption process. Thermodynamic parameters define a chemical, exothermic, and nonspontaneous mechanism. The above data suggest that Nerium fruit can be used as an excellent biomaterial for practical purification of water without the need to impart chemical functionalization on its surface.

Adsorption characteristics and mechanism of Pb(II) by agricultural waste-derived biochars produced from a pilot-scale pyrolysis system

The objective of this study was to investigate the feasibility of removing Pb²⁺ by pilot-scale fluidized bed biochar, and then to put forward an industrial-scale fluidized bed pyrolysis progress of cogeneration of biochar and high-temperature gas. Corn stalk biochars (CSBs) were prepared at 400-600 °C, in which the maximum Pb²⁺adsorption capacity (Q_m) of CSB450 is 49.70 mg⋅g^-1 at the optimal condition. Adsorption isotherms, kinetics, and thermodynamics were determined, and Pb²⁺-loaded biochar was analyzed by fourier transform infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD) and scanning electron microscope with energy dispersive spectrometer (SEM-EDS). Ion exchange, complexation and mineral precipitation together contributed to Pb²⁺ adsorption on CSBs. For high-temperature CSBs with fewer oxygen functional groups (OFGs) and stronger aromatization, Pb²⁺ adsorption by ion exchange and functional group complexation was reduced. The mineral precipitationwas formed during the adsorption process. Using the pilot-scale fluidized bed in this study, the carbon yield per year would achieve 31.79 t, and about 1.58 t of Pb²⁺ would be adsorbed according to the adsorption capacity at the pyrolytic temperature of 450 °C.The results are beneficial to screen for effective biochar as a cost-effective industrial adsorbent to remove Pb²⁺ in contaminated water.

Insights of CMNPs in water pollution control

The various toxic contaminants such as dyes, heavy metals, pesticides, rare-earth elements, and hazardous chemicals are the major threats to all the flora and fauna. Owing to the harmful ill effects caused by the toxic contaminants, it is necessary to eliminate these compounds from the authors' ecosystem. The chitosan magnetic nanomaterials (CMNPs) are one of the superior materials used in the wastewater treatment through various conventional technologies. The chitosan is a natural source obtained from the crustacean shells of crabs, prawns etc. The magnetic nanomaterial prepared by the reinforcement of chitosan is highly effective in the removal of heavy metals, dyes, organic matter, and harmful chemicals. It is used in various technologies such as adsorption, flocculation, immobilisation, photocatalytic technology, and bioremediation. This possesses unique surface and magnetic characteristics, Moreover, it is simple, economically feasible, and eco-friendly material used efficiently in wastewater treatment. This review paper depicts the overview of CMNP in the industrial effluent treatment.

Hydrothermal synthesis of magnetic nanocomposite from biowaste matrix by a green and one-step route: Characterization and pollutant removal ability

This study aimed to produce an industrial waste-based novel magnetic nanocomposite (Fe@GPHC) by a facile and one-step hydrothermal carbonization (HTC) method. In order to characterize of Fe@GPHC, X-ray fluorescence spectroscopy (XRF), Scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), Vibrating-sample magnetometer (VSM), and elemental (ultimate) analyses were applied. Characterization results showed that during the HTC process, the Fe nanoparticles (FeNPs) were successfully incorporated on biowaste matrix. In addition, the Fe@GPHC was used to test its adsorptive property. For this, methylene blue (MB) and methyl orange (MO) were selected as a simulated pollutant. A batch method was used to perform the adsorption experiments. The maximum adsorption capacity of Fe@GPHC was 11 mg g^-1 and 8.9 mg g^-1 for MB and MO, respectively. This study provides a feasible and simple approach to design and synthesis of high-performance functional magnetic material in a cost-effective way.

Highly adsorptive chitosan/saponin-bentonite composite film for removal of methyl orange and Cr(VI)

Robust and simple composite films for the removal of methyl orange (MO) and Cr(VI) have been prepared by combining chitosan, saponin, and bentonite at a specific ratio. There are several composite films (chitosan-saponin-bentonite (CSB)) prepared; among them, the composite films CSB_2:3 and CSB_1:1 have the highest removal efficiency toward MO and Cr(VI) where the maximum removal is 70.4% (pH 4.80) and 92.3% (pH 5.30), respectively. It was found that different types of adsorbate have different thermodynamic properties of the adsorption process; the adsorption of MO onto CSB_2:3, chitosan, and acid-activated bentonite (AAB) proceeded endothermically, while the adsorption of Cr(VI) onto CSB_1:1, chitosan, and AAB proceeded exothermically. The parameters of the adsorption were modeled by using isotherm and kinetic equations. The models of Langmuir, Freundlich, Redlich-Peterson, Sips, and Toth were used for fitting the adsorption isotherm data at a temperature of 30, 45, and 60 °C; all of the isotherm models could represent the data well. The result indicates that CSB_2:3 has the highest adsorption capacity toward MO with q_m of 360.90 mg g^-1 at 60 °C; meanwhile, CSB_1:1 has the highest adsorption capacity toward Cr(VI) with q_m 641.99 mg g^-1 at 30 °C. The pseudo-second-order model could represent the adsorption kinetics data better than the pseudo-first-order equation. The adsorption mechanism was proposed, and the thermodynamic properties of the adsorption were also studied.

Functional Chitosan Derivative and Chitin as Decolorization Materials for Methylene Blue and Methyl Orange from Aqueous Solution

Dyes are classified as one of the major pollutants of water. They have negative impacts not only on environment but also on human health. In fact, wastewater that contains these harmful substances requires many types of treatments. Therefore, alternative methods and adsorption agents are needed. Herein, we propose to evaluate the decolorization of methylene blue (MB) and methyl orange (MO) as two models of soluble dyes from water using chitin and chitosan-graft-polyacrylamide. Furthermore, the applicability of these biomacromolecules as alternative adsorption agents, their sticking probability and desorption were also examined. Experimental parameters such as dye concentration, contact time, pH solution, adsorbent dosage and temperature were thoroughly examined for the grafted chitosan and chitin. The activation energy ( E a ) and the thermodynamic variables (i.e., standard Gibb's free energy ( Δ G 0 ), standard enthalpy ( Δ H 0 ), and standard entropy ( Δ S 0 )) were determined using the Van't Hoff and Arrhenius equations. The sticking probability ( S *) model for MB and MO removal by chitin and the chitosan derivative demonstrated that both dyes were successfully removed under the proposed conditions. Desorption studies of MB and MO showed the reusability of both materials, suggesting their application for removing dyes from aqueous solution.

Hexavalent chromium ion and methyl orange dye uptake via a silk protein sericin-chitosan conjugate

Sericin, a protein waste product of the silk industry, was crosslinked with chitosan, and a chitosan-sericin conjugate (CS) was prepared, characterized and used to remove hexavalent chromium (Cr(vi)) ions and methyl orange (MO) dye from aqueous solutions. The CS was shown to effectively remove Cr(vi) ions and MO dye at maximum adsorption capacities (Langmuir) of 139 mg g-1 for Cr(vi) ions and 385 mg g-1 for MO dye. Moreover, the adsorption of both Cr(vi) ions and MO dye was highly pH dependent and varied under different experimental conditions. Cr(vi) ion and MO dye uptake by the CS was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy (XPS) and energy dispersive spectrometry analysis. Additionally, XPS analysis of the Cr(vi)-loaded CS revealed that Cr(vi) was reduced to the less toxic Cr(iii). The CS was shown not only to be highly amenable to regeneration, but also to be able to effectively remove MO dye and Cr(vi) ions from a binary mixture.