Synergistic effect of Chitosan-Zinc Oxide Hybrid Nanoparticles on antibiofouling and water disinfection of mixed matrix polyethersulfone nanocomposite membranes

Enhanced stability of encapsulated lemongrass essential oil in chitosan-gelatin and pectin-gelatin biopolymer matrices containing ZnO nanoparticles

The use of essential oils is widespread in various fields such as pharmacy, pest control, and active packaging. However, their instability and short-term effects require methods to enhance their durability and effectiveness. Encapsulation in biopolymer matrices appears to be a promising approach due to the environmental safety and cost-effectiveness of such formulations. In this study, different oil-in-water emulsions were prepared by mixing chitosan-gelatin (C-G) or pectin-gelatin (P-G) solutions with lemongrass essential oil (LG). ZnO NPs were used as an additional active component. Encapsulation in biopolymer matrices resulted in stable emulsions with a significantly slower release of LG, and ZnO NPs further suppressed LG release, particularly in the P-G emulsion. They also contributed to the stability of the emulsions and a decrease in the average droplet size of LG. Furthermore, the presence of LG and ZnO NPs improved the smoothness of the films prepared from the emulsions and dispersions using the casting technique. SEM/EDS analysis confirmed the homogeneous distribution of ZnO NPs in both C-G and P-G films. By adjusting the type and content of the biopolymers and NPs, such emulsions could be effectively utilized in various applications where controlled release of active components is required.

Enhanced antibacterial properties of polyvinyl alcohol/starch/chitosan films with NiO-CuO nanoparticles for food packaging

Packaging is very important to maintain the quality of food and prevent the growth of microbes. Therefore, the use of food packaging with antimicrobial properties protects the food from the growth of microorganisms. In this study, antibacterial nanocomposite films of polyvinyl alcohol/starch/chitosan (PVA/ST/CS) together with nickel oxide-copper oxide nanoparticles (NiO-CuONPs) are prepared for food packaging. NiO-CuONPs were synthesized by the co-precipitation method, and structural characterization of nanoparticles (NPs) was carried out by XRD, FTIR, and SEM techniques. Composites of PVA/ST/CS, containing different percentages of NPs, were prepared by casting and characterized by FTIR and FESEM. The mechanical properties, diffusion barrier, and thermal stability were determined. The nanoparticles have a round structure with an average size of 6.7 ± 1.2 nm. The cross-section of PVA/ST/CS film is dense, uniform, and without cracks. In the mechanical tests, the addition of NPs up to 1% improved the mechanical properties (TS = 31.94 MPa), while 2% of NPs lowered TS to 14.76 MPa. The fibroblast cells toxicity and the films antibacterial activity were also examined. The films displayed stronger antibacterial effects against Gram-positive bacteria (Staphylococcus aureus) compared to Gram-negative bacteria (Escherichia coli). Furthermore, these films have no toxicity to fibroblast cells and the survival rate of these cells in contact with the films is more than 84%. Therefore, this film is recommended for food packaging due to its excellent mechanical and barrier properties, good antibacterial activity, and non-toxicity.

Preparation and characterization of gelatin/chitosan nanocomposite reinforced by NiO nanoparticles as an active food packaging

Food packaging with antibacterial properties has attracted much attention recently. In this study, nickel oxide nanoparticles (NiONPs) were synthesized by co-precipitation and then gelatin/chitosan polymer films (GEL/CS) with different percentages of NiONPs, bio-nanocomposites, were prepared by casting. Morphology, crystal microstructure, molecular interactions and thermal stabilities of the NPs and the composite films were characterized by FESEM, XRD, FTIR and TGA, respectively. The bio-nanocomposite films exhibited excellent barrier, thermal and mechanical properties by addition of an optimized content of NPs. For example, the tensile strength (TS) of the GEL/CS film without NPs was 23.83 MPa and increased to 30.13 MPa by incorporation of 1% NPs. The antibacterial properties and toxicity of the films were investigated. These films show good antibacterial behavior against Gram-positive (Staphylococcus aureus) bacteria compared to Gram-negative (Escherichia coli) bacteria. Furthermore, the films were found to be non-toxic to fibroblast cells that came into contact with the films, with a survival rate of more than 88%. Therefore, these films can be applied for food packaging due to their excellent mechanical, barrier, and antibacterial properties.

Sustainable remediation of toxic congo red dye pollution using bio based carbon nanocomposite: Modelling and performance evaluation

Remediation of synthetic dyes found in aqueous environment poses a serious challenge for treatment due to their resistance to chemical and biological degradation. This research study investigated the application of Chitosan-ZnO-Seaweed bio nanocomposite in the remediation of congo red. The novel bionanocomposite was characterised by FTIR, SEM, TEM, EDS and XRD studies. The FTIR spectra and SEM images indicated the adsorption of congo red onto the synthesized bionanocomposite. The batch wise experimental studies were done to explore the influence of process variables on removal of congo red from synthetic wastewater and to determine optimized conditions. Under optimized conditions of pH 3, temperature 40 °C, initial congo red concentration 50 mg/L, bionanocomposite quantity 0.03 g/L and interaction period 30 min, the bionanocomposite removed 95.64% of congo red. Thermodynamic studies were carried out and the parameters, ΔH° and ΔS° were found to be 38.386 kJ/mol and 0.1451 kJ/mol. K, respectively. The isotherm and kinetic study showed that monolayer Langmuir model was obeyed (R2 = 0.968) and the experimental value of congo red adsorption correlated well with pseudo second order model (R2 = 0.9938) respectively. The maximum adsorption capacity was found to be 303.03 mg/g. Protonated amino group of chitosan, hydroxyl group of seaweed accounts for congo red adsorption along with zinc oxide.

Sustainable functionalized chitosan based nano-composites for wound dressings applications: A review

Functionalized chitosan nanocomposites have been studied for wound dressing applications due to their excellent antibacterial and anti-fungal properties. Polysaccharides show excellent antibacterial and drug-release properties and can be utilized for wound healing. In this article, we comprise distinct approaches for chitosan functionalization, such as photosensitizers, dendrimers, graft copolymerization, quaternization, acylation, carboxyalkylation, phosphorylation, sulfation, and thiolation. The current review article has also discussed brief insights on chitosan nanoparticle processing for biomedical applications, including wound dressings. The chitosan nanoparticle preparation technologies have been discussed, focusing on wound dressings owing to their targeted and controlled drug release behavior. The future directions of chitosan research include; a) finding an effective solution for chronic wounds, which are unable to heal completely; b) providing effective wound healing solutions for diabetic wounds and venous leg ulcers; c) to better understanding the wound healing mechanism with such materials which can help provide the optimum solution for wound dressing; d) to provide an improved treatment option for wound healing.

Comparative Study of ZnO-and-TiO2-Nanoparticles-Functionalized Polyvinyl Alcohol/Chitosan Bionanocomposites for Multifunctional Biomedical Applications

This study aimed to synthesize chitosan/polyvinyl alcohol (CS/PVA)-based zinc oxide (ZnO) and titanium dioxide (TiO2) hybrid bionanocomposites (BNCs) and observe their comparative accomplishment against the skin cancer cell line, A431, and antioxidant potential. CS was blended with PVA to form polymeric films reinforced with the immobilization of ZnO and TiO2 nanoparticles (NPs), separately. The optimization of the BNCs was done via physicochemical studies, viz. moisture content, swelling ratio, and contact angle measurements. The free radical scavenging activity was observed for 1,1-diphenyl-2-picryl-hydrazyl, and the antibacterial assay against the Escherichia coli strain showed a higher zone of inhibition. Furthermore, the anticancer activity of the synthesized BNCs was revealed against the skin cancer cell line A431 under varying concentrations of 50, 100, 150, 200, and 300 μg/mL. The anticancer study revealed a high percent of cancerous cell inhibition (70%) in ZnO BNCs as compared to (61%) TiO2 BNCs in a dose-dependent manner.

Fe3O4@Gum Arabic modified polyvinyl chloride membranes to improve antifouling performance and separation efficiency of organic pollutants

Nanofiltration (NF) membranes are promising media for water and wastewater treatment; however, they suffer from their hydrophobic nature and low permeability. For this reason, the polyvinyl chloride (PVC) NF membrane was modified by iron (III) oxide@Gum Arabic (Fe₃O₄@GA) nanocomposite. First, Fe₃O₄@GA nanocomposite was synthesized by the co-precipitation approach and then its morphology, elemental composition, thermal stability, and functional groups were characterized by various analyses. Next, the prepared nanocomposite was added to the casting solution of the PVC membrane. The bare and modified membranes were fabricated by a nonsolvent-induced phase separation (NIPS) method. The characteristics of fabricated membranes were assessed by mechanical strength, water contact angle, pore size, and porosity measurements. The optimum Fe₃O₄@GA/PVC membrane had a 52 L m^-2. h^-1. bar^-1 water flux with a high flux recovery ratio (FRR) value (82%). Also, the filtration experiment exhibited that the Fe₃O₄@GA/PVC membrane could remarkably remove organic contaminants, achieving high rejection rates of 98% Reactive Red-195, 95% Reactive Blue-19, and 96% Rifampicin antibiotic by 0.25 wt% of Fe₃O₄@GA/PVC membrane. According to the results, adding Fe₃O₄@GA green nanocomposite to the membrane casting solution is a suitable and efficient procedure for modifying NF membranes.

Antibacterial Mesoporous Silica Granules Containing a Stable N-Halamine Moiety

High-efficacy and regenerable antimicrobial silica granules were prepared via oxa-Michael addition between poly(vinyl alcohol) (PVA) and methylene-bis-acrylamide (MBA) under the catalysis of sodium carbonate in an aqueous solution. Diluted water glass was added, and the solution pH was adjusted to about 7 to precipitate PVA-MBA modified mesoporous silica (PVA-MBA@SiO₂) granules. N-Halamine-grafted silica (PVA-MBA-Cl@SiO₂) granules were achieved by adding diluted sodium hypochlorite solution. It was found that a BET surface area of about 380 m² g^-1 for PVA-MBA@SiO₂ granules and a Cl⁺% of about 3.80% for PVA-MBA-Cl@SiO₂ granules could be achieved under optimized preparation conditions. Antimicrobial tests showed that the as-prepared antimicrobial silica granules were capable of about a 6-log inactivation of Staphylococcus aureus and Escherichia coli O157:H7 within 10 min of contact. Furthermore, the as-prepared antimicrobial silica granules can be recycled many times due to the excellent regenerability of their N-halamine functional groups and can be saved for a long time. With the above-mentioned advantages, the granules have potential applications in water disinfection.

Recent Advances in ZnO Nanomaterial-Mediated Biological Applications and Action Mechanisms

In recent years, with the deepening research, metal zinc oxide (ZnO) nanomaterials have become a popular research object in the biological field, particularly in biomedicine and food safety, which is attributed to their unique physicochemical properties such as high surface area and volume ratio, luminescence effect, surface characteristics and biological activities. Herein, this review provides a detailed overview of the ZnO nanomaterial-mediated biological applications that involve anti-bacterial, anti-tumor, anti-inflammation, skin care, biological imaging and food packaging applications. Importantly, the corresponding action mechanisms of ZnO nanomaterials are pointed. Additionally, the structure and structure-dependent physicochemical properties, the common synthesis methods and the biosafety of ZnO nanoparticles are revealed in brief. Finally, the significance and future challenges of ZnO nanomaterial applications are concluded.

Laccase-immobilized on superparamagnetic iron oxide nanoparticles incorporated polymeric ultrafiltration membrane for the removal of toxic pentachlorophenol

A biocatalytic membrane offers an ideal alternative to the conventional treatment process for the removal of toxic pentachlorophenol (PCP). The limelight of the study is to utilize superparamagnetic iron oxide nanoparticles (SPIONs) incorporated (poly (methyl vinyl ether-alt-maleic acid) (PMVEAMA) and poly (ether - ether) sulfone (PEES)) membrane for immobilization of laccase and its application towards the removal of PCP. In regard to immobilization of Tramates versicolor laccase onto membranes, 5 mM glutaraldehyde with 10 h cross-linking time was employed, yielding 76.92% and 77.96% activity recovery for PEES/PMVEAMA/La and PEES/PMVEAMA/SPIONs/Lac, respectively. In the context of kinetics and stability studies, the immobilized laccase on PEES/PMVEAMA/Lac membrane outperforms the free and PEES/PMVEAMA laccases. At pH 7.0, the free enzyme loses half of its activity, while the immobilized laccases maintained more than 87% of their initial activity even after 480 min. With regard to PCP removal, the removal efficiency of immobilized laccase on the membrane was more than free enzyme. With 100 ppm of PCP, immobilized laccase on PEES/PMVEAMA/SPIONs membrane at pH 4.0 and 50 °C had a removal efficacy of 61.65% in 24 h. Furthermore, to perk up the removal of PCP, the laccase-aided system with mediators was investigated. Amongst, veratryl alcohol displayed 71.04% of PCP removal using immobilized laccase. The reusability of the laccase heightened after immobilization on PEES/PMVEAMA/SPIONs portraying 62.44% of the residual activity with 39.4% of PCP removal even after five cycles. The current investigation reveals the efficacy of the mediator-aided PEES/PMVEAMA/lac membrane system towards removing PCP from the aqueous solution, which can also be proposed for a membrane bioreactor.

A passive-active combined strategy for ultrafiltration membrane fouling control in continuous oily wastewater purification

Membrane-based technology has been confirmed as an effective way to treat emulsified oily wastewater, however, membrane fouling is still one of practical challenges in long-term operation. Herein, a novel passive-active combined strategy was proposed to control membrane fouling in continuous oily wastewater purification, where the δ-MnO₂ decoration layer helped to reduce the total fouling ratio (passive strategy for fouling mitigation) and the catalytic cleaning effectively removed the irreversible oil fouling (active strategy for fouling removal). The functional membrane was prepared via in-situ modification, referred to as δ-MnO₂@TA-PES. The morphology, crystalline phase, chemical structure and surface properties of the membranes were systematically characterized. Compared with PES, the δ-MnO₂@TA-PES possessed superhydrophilicity, enhanced electronegativity and narrowed pore size. The δ-MnO₂@TA-PES achieved high water permeation flux of 723.9 L·m ^- 2·h ^- 1·bar^-1, excellent oil rejection with separation efficiency above 98.5% for various emulsions, and durable anti-oil-fouling performance with FRR_b of 98.0%. Notably, the oil cake layer fouling on δ-MnO₂@TA-PES was greatly alleviated owing to its enhanced surface properties. In addition, δ-MnO₂@TA-PES showed high cleaning efficiency in the peroxymonosulfate (PMS) cleaning process, where the radical and nonradical pathways occurred simultaneously. And the active substances generated in the nonradical process (especially ¹O₂) were considered as the main contributor to the reduction of irreversible fouling. Overall, the novel strategy of fouling control ensured the efficient operation of ultrafiltration membranes for the continuous oily wastewater purification.

Novel antibacterial polyurethane and cellulose acetate mixed matrix membrane modified with functionalized TiO2 nanoparticles for water treatment applications

Bacterial contamination is one of the leading causes of water pollution. Antibacterial polyurethane/cellulose acetate membranes modified by functionalized TiO₂ nanoparticles were processed and studied. TiO₂ nanoparticles were prepared and ultraviolet (UV) irradiated to activate their photocatalytic activity against Escherichia coli (E. Coil) and Methicillin-resistant Staphylococcus aureus (MRSA) bacteria. Functionalized TiO₂ nanoparticles were incorporated in flat-sheet mixed matrix membranes (MMMs). These membranes were characterized for their different properties such as morphology, thermal stability, mechanical strength, surface wettability, water retention, salt rejection, water flux, and their antibacterial performance against E. Coil and MRSA was also tested. The activity of nanoparticles against MRSA and E. coli was analyzed using three different concentrations, 0.5 wt%, 1.0 wt% and 1.5 wt% of nanoparticles and 0.5 wt% of TiO₂ nanoparticles showed maximum growth of bacteria. The maximum inhibition was observed in membranes with maximum nanoparticles when compared with other membranes. All these characteristics were strongly affected by increasing the concentration of TiO₂ nanoparticles in the prepared membranes and the duration of their UV exposure. Hence, it was proved from this analysis that these TiO₂ modified membranes exhibit substantial antibacterial properties. The results are supporting the utilization of these materials for water purification purposes.

Functionalization of PEG-AgNPs Hybrid Material to Alleviate Biofouling Tendency of Polyethersulfone Membrane

Membrane-based processes are a promising technology in water and wastewater treatments, to supply clean and secure water. However, during membrane filtration, biofouling phenomena severely hamper the performance, leading to permanent detrimental impacts. Moreover, regular chemical cleaning is ineffective in the long-run for overcoming biofouling, because it weakens the membrane structure. Therefore, the development of a membrane material with superior anti-biofouling performance is seen as an attractive option. Hydrophilic-anti-bacterial precursor polyethylene glycol-silver nanoparticles (PEG-AgNPs) were synthesized in this study, using a sol-gel method, to mitigate biofouling on the polyethersulfone (PES) membrane surface. The functionalization of the PEG-AgNP hybrid material on a PES membrane was achieved through a simple blending technique. The PES/PEG-AgNP membrane was manufactured via the non-solvent induced phase separation method. The anti-biofouling performance was experimentally measured as the flux recovery ratio (FRR) of the prepared membrane, before and after incubation in E. coli culture for 48 h. Nanomaterial characterization confirmed that the PEG-AgNPs had hydrophilic-anti-bacterial properties. The substantial improvements in membrane performance after adding PEG-AgNPs were evaluated in terms of the water flux and FRR after the membranes experienced biofouling. The results showed that the PEG-AgNPs significantly increased the water flux of the PES membrane, from 2.87 L·m⁻²·h⁻¹ to 172.84 L·m⁻²·h⁻¹. The anti-biofouling performance of the PES pristine membrane used as a benchmark showed only 1% FRR, due to severe biofouling. In contrast, the incorporation of PEG-AgNPs in the PES membrane decreased live bacteria by 98%. It enhanced the FRR of anti-biofouling up to 79%, higher than the PES/PEG and PES/Ag membranes.

Zinc associated nanomaterials and their intervention in emerging respiratory viruses: Journey to the field of biomedicine and biomaterials

Respiratory viruses represent a severe public health risk worldwide, and the research contribution to tackle the current pandemic caused by the SARS-CoV-2 is one of the main targets among the scientific community. In this regard, experts from different fields have gathered to confront this catastrophic pandemic. This review illustrates how nanotechnology intervention could be valuable in solving this difficult situation, and the state of the art of Zn-based nanostructures are discussed in detail. For virus detection, learning from the experience of other respiratory viruses such as influenza, the potential use of Zn nanomaterials as suitable sensing platforms to recognize the S1 spike protein in SARS-CoV-2 are shown. Furthermore, a discussion about the antiviral mechanisms reported for ZnO nanostructures is included, which can help develop surface disinfectants and protective coatings. At the same time, the properties of Zn-based materials as supplements for reducing viral activity and the recovery of infected patients are illustrated. Within the scope of noble adjuvants to improve the immune response, the ZnO NPs properties as immunomodulators are explained, and potential prototypes of nanoengineered particles with metallic cations (like Zn2+) are suggested. Therefore, using Zn-associated nanomaterials from detection to disinfection, supplementation, and immunomodulation opens a wide area of opportunities to combat these emerging respiratory viruses. Finally, the attractive properties of these nanomaterials can be extrapolated to new clinical challenges.

Polymeric Nanocomposites for Environmental and Industrial Applications

Polymeric nanocomposites (PNC) have an outstanding potential for various applications as the integrated structure of the PNCs exhibits properties that none of its component materials individually possess. Moreover, it is possible to fabricate PNCs into desired shapes and sizes, which would enable controlling their properties, such as their surface area, magnetic behavior, optical properties, and catalytic activity. The low cost and light weight of PNCs have further contributed to their potential in various environmental and industrial applications. Stimuli-responsive nanocomposites are a subgroup of PNCs having a minimum of one promising chemical and physical property that may be controlled by or follow a stimulus response. Such outstanding properties and behaviors have extended the scope of application of these nanocomposites. The present review discusses the various methods of preparation available for PNCs, including in situ synthesis, solution mixing, melt blending, and electrospinning. In addition, various environmental and industrial applications of PNCs, including those in the fields of water treatment, electromagnetic shielding in aerospace applications, sensor devices, and food packaging, are outlined.

Electrospun Nanofiber-Based Viroblock/ZnO/PAN Hybrid Antiviral Nanocomposite for Personal Protective Applications

Designing novel antiviral personal protective equipment (PPE) is crucial for preventing viral infections such as COVID-19 in humans. Here, we fabricate an electrospun nanofiber-based Viroblock (VB)-loaded polyacrylonitrile (PAN)/zinc oxide (ZnO) hybrid nanocomposite for PPE applications. Five different concentrations of Viroblock (0.5%, 1.5%, 2.5%, 3.5%, and 5%) were added to PAN/ZnO solution and loaded for electrospinning. The developed samples reflected antibacterial activity of 92.59% and 88.64% against Staphylococcus aureus and Pseudomonas aeruginosa bacteria, respectively, with 5% VB loading. Moreover, a significant reduction in virus titer (37%) was observed with the 5% VB/PAN/ZnO nanofiber sheet. Hence, VB-loaded PAN/ZnO nanofibers have great potential to kill enveloped viruses such as influenzas and coronaviruses and could be the ideal candidate for the development of nanofiber-based PPE, such as facemasks and surgical gowns, which can play a key role in the protection of frontline health workers and the general public in the COVID-19 pandemic.

TiO2 Nanoparticle Filler-Based Mixed-Matrix PES/CA Nanofiltration Membranes for Enhanced Desalination

Mixed-matrix nanocomposite (PES/CA/PVP) membranes were fabricated for water desalination by incorporating varying amount of titanium dioxide nanoparticles (TiO₂ NPs) ranging from 0 and 2 wt. %. Efficient dispersion of nanoparticles within polymeric membranes was achieved using the chemical precipitation method for uniform surface generation, and an asymmetric morphology was achieved via phase inversion method. Finally, membranes were characterized by Fourier Transform Infrared (FTIR) spectroscopy, Thermo Gravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), porosity and contact angle analysis. FTIR confirmed chemical composition of membranes in terms of polymers (PES/CA/PVP) and TiO₂. TGA analysis confirmed an increase in thermal stability of membranes with the increase of TiO₂ nanoparticles loading. The addition of TiO₂ nanoparticles also resulted in an increase in porous structures due to an increase in mean pore size, as shown by SEM results. An increase in the hydrophilicity of the membranes was observed by increasing the concentration of TiO₂ nanoparticles. The present study investigated pristine and mixed-matrix nanocomposite NF membrane performance while filtering a NaCl salt solution at varying concentration range (from 1 to 4 g/Lit 6 bar). The prepared membranes demonstrated significant improvement in water permeability and hydrophilicity. Further, to optimize the water flux and salt rejection, the concentration of Polyvinylpyrrolidone (PVP) was optimized along with TiO₂ nanoparticles. Both the water flux and salt rejection of the fabricated membranes were observed to increase with an increase inTiO₂ nanoparticles to 2 wt. % loading with optimized PVP concentration, which demonstrated the improved desalination performance of resultant membranes.

Toughened chitosan-based composite membranes with antibiofouling and antibacterial properties via incorporation of benzalkonium chloride

Biofouling due to biofilm formation is a major problem in ultrafiltration membrane applications. In this work, a potential approach to solve this issue has been developed by functionalization of chitosan-based membranes with benzalkonium chloride (BKC). The chitosan composite membranes consisting of poly(ethylene glycol) (PEG), multiwalled carbon nanotubes (MWCNT), and BKC were synthesized by mixing the membrane precursors and the antibacterial solution, and casting via an inversed phase technique. The effects of the BKC content on the morphology and performance of the membranes are investigated by varying the BKC feed compositions. The composite membranes demonstrate better antibacterial efficacy against Staphylococcus aureus than Escherichia coli. The permeability and selectivity performances of the composites as filter membranes are examined by employing a dead-end filtration system. Interestingly, enhanced toughness of the membranes is observed as a function of the BKC content. Mechanisms of the structural formation are investigated. The results from SEM, XRD, and FTIR spectroscopy revealed that MWCNT/BKC are located as nanoclusters with π–π stacking interactions, and are covered by PEG chains. The shape of the dispersed domains is spherical at low BKC contents, but becomes elongated at high BKC contents. These act as soft domains with an anisotropic shape with toughening of the brittle chitosan matrix, leading to enhanced durability of the membranes, especially in ultrafiltration applications. The composite membranes also demonstrate improved rejection in dead-end ultrafiltration systems due to high porosity, high hydrophilicity, and the positive charges of the membrane surface.

Chitosan/PEG/MWCNT/BKC membranes exhibit enhanced antibiofouling properties against S. aureus and E. coli. MWCNT/BKC are located as dispersed nano-clusters with π–π stacking interactions in the chitosan matrix, and are coved by PEG chains.

Food grade zinc oxide bulk particle composite can replace the toxic zinc oxide nano composite towards the control of pathogenic and spoilage bacteria

ZnO-Nanoparticle-Chitosan (ZnO-NP-CH) composite has potential biomedical and food applications due to its better antimicrobial activity. However, the presence of nano-metal-oxide in the composite makes the material unsuitable for any food applications. Moreover, the cost involved in the preparation of Zinc Oxide-Nano-Particle (ZnO-NP) is a major limitation for commercial food applications. Hence a suitable alternative for ZnO-NP is highly needed for food application. Since ZnO-Bulk Particles (ZnO-BP) are food grade and there is no study on the composite prepared from ZnO-Bulk Particle-Chitosan (ZnO-BP-CH), in the present study, antimicrobial activity was assessed for ZnO-BP-CH and compared with ZnO-NP-CH. Based on the study, it was observed that in the individual form of ZnO-NP possessed significantly higher antimicrobial activity than ZnO-BP. The composite form of ZnO-NP-CH and ZnO-BP-CH possessed higher antimicrobial activity than chitosan. However, no significant difference was observed between the composite forms. Hence, ZnO-BP-CH could be recommended as a suitable alternative to ZnO-NP-CH for future studies related to chitosan with ZnO composite to avoid costly nanomaterials preparation.

Development of Polyvinylidene Fluoride Membrane by Incorporating Bio-Based Ginger Extract as Additive

Biofouling on the membrane surface leads to performance deficiencies in membrane filtration. In this study, the application of ginger extract as a bio-based additive to enhance membrane antibiofouling properties was investigated. The extract was dispersed in a dimethyl acetamide (DMAc) solvent together with polyvinylidene fluoride (PVDF) to enhance biofouling resistance of the resulting membrane due to its antibiotic property. The concentrations of the ginger extract in the dope solution were varied in the range of 0–0.1 wt %. The antibacterial property of the resulting membranes was assessed using the Kirby Bauer disc diffusion method. The results show an inhibition zone formed around the PVDF/ginger membrane against Escherichia coli and Staphylococcus aureus demonstrating the efficacy of the residual ginger extract in the membrane matrix to impose the antibiofouling property. The addition of the ginger extract also enhanced the hydrophilicity in the membrane surface by lowering the contact angle from 93° to 85°, which was in good agreement with the increase in the pure water flux of up to 62%.

The preparation of chitosan membrane improved with nanoparticles based on unsaturated fatty acid for using in cancer-related infections

This study includes the design of a chitosan membrane decorated with unsaturated fatty acid–based carrier system for cancer treatment and antibacterial application. For this, polystyrene-graft-polyoleic acid-graft-polyethylene glycol was prepared by free radical polymerization and characterized. Nanoparticles and caffeic acid–loaded nanoparticles were prepared by solvent evaporation technique and optimized. The short-term stability of nanoparticles was investigated at 4°C. Drug encapsulation and loading efficiency were evaluated. The chitosan membrane and caffeic acid–loaded nanoparticles embedded into chitosan membrane were fabricated. The caffeic acid loaded nanoparticles embedded into chitosan membrane showed controlled release. The mechanical properties of all samples were investigated. The caffeic acid–loaded nanoparticles embedded into chitosan membranes indicated excellent antibacterial properties against the Escherichia coli and Staphylococcus aureus. The anticancer activity of all the samples was evaluated against SaOS-2 human primary osteogenic sarcoma and MC3T3-E1 pre-osteoblast cell lines by 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide assay, the flow cytometry and double staining methods. As a result, the designed carrier system showed great potential to cancer-associated infections treatment in bone cancer cases.

Biodegradable Hybrid Nanocomposite of Chitosan/Gelatin and Green Synthesized Zinc Oxide Nanoparticles for Food Packaging

In the context of emerging global concerns with synthetic plastic packaging, alternative natural biodegradable packaging materials are gaining increasing attention for food packaging applications. In this study, chitosan and gelatin nanocomposite hybrid films containing green synthesized zinc oxide (ZnO) nanoparticles (NPs) were developed and microstructural properties were studied. Antimicrobial activity of the developed films was evaluated using both Gram negative (Escherichia coli) and Gram positive bacteria (Staphylococcus aureus). Green synthesis protocol was used for the precipitation of ZnO NPs using fruit extract of Cassia fistula. The as-synthesized polyhedral ZnO NPs were in the range of 20–40 nm (average size ≈29 nm). Reinforcement with ZnO NPs in the hybrid films lead to improved thermal stability, elongation-at-break (EAB), and compactness properties. The developed films with 2% and 4% ZnO NPs showed a smooth, compact, and heterogeneous surface morphology compared to the control (chitosan-gelatin hybrid) films. Disc diffusion assays showed that the nanocomposite film had significant antimicrobial activity against E. coli. The developed hybrid nanocomposite films have potential to be developed as biodegradable alternative for postharvest packaging of fresh fruits and vegetables.

Cannabinoids and Terpenes as an Antibacterial and Antibiofouling Promotor for PES Water Filtration Membranes

Plant phytochemicals have potential decontaminating properties, however, their role in the amelioration of hydrophobic water filtration membranes have not been elucidated yet. In this work, phytochemicals (i.e., cannabinoids (C) and terpenes (T) from C. sativa) were revealed for their antibacterial activity against different Gram-positive and Gram-negative bacteria. As such, a synergistic relationship was observed between the two against all strains. These phytochemicals individually and in combination were used to prepare polyethersulfone (PES) hybrid membranes. Membrane characterizations were carried out using scanning electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy. Moreover, contact angle, water retention, surface roughness, mechanical testing, and X-ray florescence analysis were also carried out. According to results, the CT-PES hybrid membrane exhibited the lowest contact angle (40°), the highest water retention (70%), and smallest average pore size (0.04 µm). The hybrid membrane also exhibited improved water flux with no surface leaching. Quantitative bacterial decline analysis of the CT-PES hybrid membranes confirmed an effective antibacterial performance against Gram-positive and Gram-negative bacteria. The results of this study established cannabinoids and terpenes as an inexpensive solution for PES membrane surface modification. These hybrid membranes can be easily deployed at an industrial scale for water filtration purposes.

Porous antimicrobial starch particles containing N-halamine functional groups

The porous antimicrobial starch particles containing N-Halamine functional groups (PST-MBA-Cl particles) were synthesized by a crosslinking polymerization between starch (ST) and N, N'-methylenebisacrylamide (MBA), and then a chlorination of amide groups of MBA. The synthetic process used only water as the solvent and was environmentally friendly. The results showed that under the optimal preparation conditions, the as-synthesized PST-MBA-Cl particles could have a Cl⁺% of 8.60 %. Antimicrobial tests showed that PST-MBA-Cl particles had very powerful antimicrobial efficacy against both Staphylococcus aureus and Escherichia coli and could completely kill Staphylococcus aureus with a concentration of 2.1 × 10⁶ CFU/mL and Escherichia coli with a concentration of 5.6 × 10⁶ CFU/mL within a contact time of one minute. Furthermore, the N-Halamine functional groups of PST-MBA-Cl particles also showed excellent stability under storage and reproducibility. Therefore, the as-synthesized PST-MBA-Cl particles will have potential applications in water disinfection.

Polymer Concentration and Solvent Variation Correlation with the Morphology and Water Filtration Analysis of Polyether Sulfone Microfiltration Membrane

Microfiltration flat sheet membranes of polyether sulfone (PES) were fabricated by incorporating varying concentrations of polymer and investigated the influence of substituting solvents. The membranes were prepared via immersion precipitation method. Different solvents that included NMP (N-methyl-2-pyrrolidone), DMF (dimethylformamide), and THF (tetrahydrofuran) were used to analyse their effect on the performance and morphology of the prepared membranes. Two different coagulation bath temperatures were used to investigate the kinetics of membrane formation and subsequent effect on membrane performance. The maximum water flux of 141 ml/cm2.h was observed using 21% of PES concentration in NMP + THF cosolvent system. The highest tensile strength of 29.15 MPa was observed using membrane prepared with 21% PES concentration in NMP as solvent and coagulation bath temperature of 25°C. The highest hydraulic membrane resistance was reported for membrane prepared with 21% PES concentration in NMP as solvent. Moreover, the lowest contact angle of 67° was observed for membrane prepared with 15% of PES concentration in NMP as solvent with coagulation bath temperature of 28°C. Furthermore, the Hansen solubility parameter was used to study the effect on the thermodynamics of membrane formation and found to be in good correlation with experimental observation and approach in the present work.

Graphene Oxide-PES-Based Mixed Matrix Membranes for Controllable Antibacterial Activity against Salmonella typhi and Water Treatment

The present work is focused on preparation, characterization, and antibacterial activity evaluation of graphene oxide/polyethersulfone mixed matrix filtration membranes. Graphene oxide (GO) was synthesized via improved Hummer’s method and characterized by XRD, FTIR, and SEM. FT-IR spectra showed the presence of carboxylic acid and hydroxyl groups on GO nanosheets. Different concentrations of the synthesized GO at 0.25, 0.5, and 1.0 wt. % were incorporated in polyethersulfone (PES) matrix via phase inversion method to fabricate GO-PES membranes. Increasing porosity and formation of wider, finger-like channels were observed with increased GO concentrations relative to pristine membranes as evident from scanning electron microscopy (SEM) micrographs of the fabricated membranes. However, membranes prepared with 1 wt. % GO appear to contain aggregation and narrowing of pore morphology. GO-incorporated membranes demonstrated enhanced flux, water-retaining capacities, and wettability as compared to pristine PES membranes. Shake flask and colony counting methods were employed to carry out antibacterial testing of synthesized GO and fabricated GO-PES membranes against Salmonella typhi (S. typhi)—a gram-negative bacteria present in water that is known as causative agent of typhoid. Synthesized GO showed significant reduction up to 70.8% in S. typhi cell count. In the case of fabricated membranes, variable concentrations of GO are observed to significantly influence the percentage viability of S. typhi, with reduction percentages observed at 41, 60, and 69% for 0.25, 0.5, and 1.0 wt. % GO-incorporated membranes relative to 17% in the case of pristine PES membranes. The results indicate a good potential for applying GO/PES composite membranes for water filtration application.

Electrospun nanofibers hybrid composites membranes for highly efficient antibacterial activity

Safety of drinking-water is an urgent for human health. It is critical to promote the cheap technologies for water purification to guarantee the free-pathogens-drinking water. The present study has been investigated the antibacterial activity of polyacrylonitrile (PAN) nanofibers membranes which decorated by Ag, CuO or ZnO nanoparticles as bactericides. The hybrid nanofiber composites were fabricated by electrospinning technique and the obtained membranes were characterized using SEM, EDX and FTIR. Their antibacterial activity was evaluated against E. coli and S. aureus. The data was revealed that the functionalization was successfully obtained by the incorporation of nanoparticles as an additive into the polymer solution which associated many superior properties. Continuous PAN membrane fibers with average diameters from 170 to 250 nm without any beads of plain and its hybrid membrane composites were obtained. The antimicrobial activity was estimated using both disk diffusion tests and growth kinetic models. The antibacterial activity was improved as the concentrations of nanoparticles enhanced. This study provided the real solution for production and inactivation of bacteria which related to the impregnated the PAN nanofibers membrane with Ag, CuO or ZnO NPs. The results have significant implications for finding a safe and an inexpensive path to solve the problems of drinking water, especially in the developing countries.

Recent advances in hydrophilic modification and performance of polyethersulfone (PES) membrane via additive blending

The blending of additives in the polyethersulfone (PES) matrix is an important approach in the membrane industry to reduce membrane hydrophobicity and improve the performance (flux, solute rejection, and reduction of fouling). Several (hydrophilic) modifications of the PES membrane have been developed. Given the importance of the hydrophilic modification methods for PES membranes and their applications, we decided to dedicate this review solely to this topic. The types of additives embedded into the PES matrix can be divided into two main categories: (i) polymers and (ii) inorganic nanoparticles (NPs). The introduced polymers include polyvinylpyrrolidone, chitosan, polyamide, polyethylene oxide, and polyethylene glycol. The introduced nanoparticles discussed include titanium, iron, aluminum, silver, zirconium, silica, magnesium based NPs, carbon, and halloysite nanotubes. In addition, the applications of hydrophilic PES membranes are also reviewed. Reviewing the research progress in the hydrophilic modification of PES membranes is necessary and imperative to provide more insights for their future development and perhaps to open the door to extend their applications to other more challenging areas.