Chitosan based nano composite adsorbent-Synthesis, characterization and application for adsorption of binary mixtures of Pb(II) and Cd(II) from water

Remediation of Cr(VI)-contaminated soil by CS/PPy coupling with Microbacterium sp. YL3

In this research, a new material, chitosan/polypyrrole (CS/PPy), was synthesized and linked with the Cr(VI)-reducing bacterial strain YL3 to treat Cr(VI)-polluted soil. The findings demonstrated that the synergistic application of strain YL3 and CS/PPy achieved the greatest reduction (99.6 %). During the remediation process, CS/PPy served as a mass-storage and sustained release agent in the soil, which initially decreased the toxic effects of high concentrations of Cr(VI) on strain YL3, thereby enhancing the Cr(VI) reduction efficiency of strain YL3. These combined effects significantly mitigated Cr(VI) stress in the soil and restored enzyme activities. Furthermore, wheat growth in the treated soil also significantly improved. High-throughput sequencing of the microorganisms in the treated soil revealed that CS/PPy was not only effective at removing Cr(VI) but also at preserving the original microbial diversity of the soil. This suggests that the combined treatment using strain YL3 and CS/PPy could rehabilitate Cr(VI)-contaminated soil, positioning CS/PPy as a promising composite material for future bioremediation efforts in Cr(VI)-contaminated soils.

Effectiveness of polyacrylamide-g-gelatin/ACL/Mg-Fe LDH composite hydrogel as an eliminator of crystal violet dye

Cationic synthetic dyes are one of the hazards in aqueous solutions that can affect the health of humans and living organisms. In the current work, polyacrylamide (PAM)-g-gelatin hydrogel and modified PAM-g-gelatin hydrogel using activated carbon of Luffa cylindrica (ACL) and ACL/Mg-Fe LDH were applied to eliminate crystal violet (CV), a cationic dye, from water media. The hydrogels were synthesized using free radical polymerization approach, and the hydrogels were characterized using FTIR, XRD, TGA-DTG, BET, SEM, and EDX-Map. The surface area of ACL, ACL/Mg-Fe LDH, PAM-g-gelatin, PAM-g-gelatin/ACL, and PAM-g-gelatin/ACL/Mg-Fe LDH were 99.71, 141.99, 0.74, 1.47, and 1.65 m2/g, respectively, which shows that the presence of ACL and ACL/Mg-Fe LDH improved the area of the hydrogels. The maximum abatement of CV using PAM-g-gelatin (92.81%), PAM-g-gelatin/ACL (95.71%), and PAM-g-gelatin/ACL/Mg-Fe LDH (98.25%) was obtained at pH=9, temperature 25 °C, 10 mg/L CV, 60 min time, and adsorber dose of 2 g/L (for PAM-g-gelatin) and 1.5 g/L (other samples). The value of thermodynamic factors confirmed that the abatement process is exothermic and spontaneous. The kinetics data followed the pseudo-second kinetic (PSO) model. The Langmuir isotherm model had a more remarkable ability to describe the equilibrium data. The maximum adsorption capacity for PAM-g-gelatin, PAM-g-gelatin/ACL, and PAM-g-gelatin/ACL/Mg-Fe LDH was determined 35.45, 39.865, and 44.952 mg/g, respectively. Generally, the studied hydrogels can eliminate dyes from wastewater and be used as effective adsorbers.

Construction of 3D-Printed Sodium Alginate/Chitosan/Halloysite Nanotube Composites as Adsorbents of Methylene Blue

In this study, sodium alginate/chitosan/halloysite nanotube composites were prepared by three-dimensional printing and characterized in terms of morphology, viscosity, thermal properties, and methylene blue (MB) adsorption performance. The high specific surface area and extensively microporous structure of these composites allowed for effective MB removal from wastewater; specifically, a removal efficiency of 80% was obtained after a 60 min treatment at an adsorbent loading of 1 g L-1 and an MB concentration of 80 mg L-1, while the maximum MB adsorption capacity equaled 376.3 mg g-1. Adsorption kinetics and isotherms were well described by quasi-second-order and Langmuir models, respectively. The composites largely retained their adsorption performance after five adsorption-desorption cycles and were concluded to hold great promise for MB removal from wastewater.

Novel poly (N-methacryloyl-L-alanine acid) grafted chitosan microspheres based solid-phase extraction coupled with ICP-MS for simultaneous detection of trace metal elements in food

Poly (N-methacryloyl-L-alanine acid) grafted tartaric acid-crosslinked chitosan microspheres (PNMA-TACS) were successfully synthesized and employed as a novel adsorbent for the separation and enrichment of metal ions in the food system. PNMA-TACS microspheres-based solid phase extraction (SPE) was coupled with ICP-MS for accurate quantification of trace V(V), Cr(III), As(III), Pb(II), Cd(II) and Cu(II). The obtained PNMA-TACS microspheres were characterized, and parameters influencing the method were optimized. Under optimal conditions, the calibration curves for Cu(II) and V(V) were linear within 0.01-30 μg L-1, the linear ranges of Cr(III), As(III), Pb(II) and Cd(II) were 0.01-15 μg L-1, and the detection limit of the developed approach was 1.1-3.7 ng L-1. The results were consistent with the consensus values of method validation implemented by two standards. Moreover, standard addition recovery experiments were performed in rice and milk powder, which achieved satisfactory recovery of 86.1-103.5%.

Magnetite/β-cyclodextrin/fly ash composite as an effective and recyclable adsorbent for uranium(VI) capture from wastewater

As a novel adsorbent for the separation of uranium(VI) from wastewater, Magnetite/β-cyclodextrin/fly ash composite (Fe₃O₄/β-CD/FA) was first prepared via a chemical coprecipitation technology. The characterization results indicated that Fe₃O₄ and β-CD had been successfully loaded on FA, which had brought abundant oxygen-containing functional groups, providing numerous adsorptive sites for the removal of uranium(VI). At pH = 5.0 and T = 25 °C, the maximum uranium(VI) removal efficiency and capacity of Fe₃O₄/β-CD/FA were higher to 97.8% and 444.4 mg g^-1, respectively. Pseudo-second-order and Langmuir models fitted better with the experimental data, illustrating that chemical adsorption dominated the uranium(VI) removal process. In addition, Fe₃O₄/β-CD/FA showed good anti-interference ability and recoverability. After five cycles, the removal rate of uranium(VI) on Fe₃O₄/β-CD/FA was still higher to 90.4%. The immobilization of uranium(VI) on Fe₃O₄/β-CD/FA was mainly ascribed to the synergism of redox reaction, complex reaction, chemical reaction and electrostatic interaction. Given the above, Fe₃O₄/β-CD/FA would be regarded as an efficacious, green and promising adsorbent for uranium(VI) separation from wastewater.

Application of Bentonite Clay, Date Pit, and Chitosan Nanoparticles as Promising Adsorbents to Sequester Toxic Lead and Cadmium from Milk

Evaluating residual lead (Pb) and cadmium (Cd) levels in food products, especially milk, is critical for product safety and quality. In this purview, the current study aims to determine Pb and Cd concentrations in milk using atomic absorption spectrophotometry and compare their values with international standards. In addition, it aims to remove these metals from milk samples using low-cost, naturally occurring materials, such as bentonite, date pit, and chitosan nanoparticles. The ability of potential adsorbents was also investigated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and transmission electron microscope (TEM). Moreover, their impact on milk's nutritional properties was considered. The results revealed that most milk samples contained Pb and Cd, with mean values of 0.237 ± 0.179 and 0.041 ± 0.036 mg/kg, respectively. Furthermore, the three possible adsorbents demonstrated high sequestering ability due to their existing functional groups; the adsorption capacity of bentonite to Pb and Cd was 84 and 88%, date pit was 97 and 93%, and chitosan nanoparticles were 82 and 98%, respectively, with no discernible change in milk nutritional contents. In conclusion, the bentonite, date pit, and chitosan nanoparticles were found to be significantly effective and safe in removing hazardous trace elements (Pb and Cd) from contaminated milk.

The highly efficient simultaneous removal of Pb2+ and methylene blue induced by the release of endogenous active sites of montmorillonite

The inherent periodic structure of montmorillonite limits the adsorption capacity of its endogenous active units such as Si-O tetrahedron and Al-O octahedron for pollutants. The high-intensity ultrasound method was used to release these active units and the layer-by-layer assembly was adopted to prepare carbon@chitosan@montmorillointe microsphere adsorbent (C@CS@Mt) to give full play to the adsorption capacity of montmorillonite. The montmorillonite nanosheet exhibited good hole-making ability, resulting in high surface area, pore volume and pore diameter of microspheres. Benefitting from the release of active sites in Si-O tetrahedron and Al-O octahedron of montmorillonite nanosheets, the adsorption capacity of C@CS@Mt was significantly improved. The maximum adsorption capacities of Pb²⁺ and methylene blue (MB) reached 884.19 mg·g^-1 and 326.21 mg·g^-1, respectively. The simultaneous adsorption experiments indicated that the occupation of active sites by Pb²⁺ caused the observed decrease of MB adsorption capacity. The theoretical calculations indicated that Pb was preferentially adsorbed by active adsorption units due to strong electron donating ability in comparison to MB. As an active unit, Si-O tetrahedron exhibited stronger adsorption capacity for cationic dyes than Al-O octahedron due to both the large electronegativity and lower adsorption binding energy.

Explorations on efficient extraction of uranium with porous coal fly ash aerogels

In order to explore a suitable uranium adsorbent with the advantages of low-cost, recyclability and high efficiency, porous coal fly ash aerogels with different size of coal fly ash were synthesized. Among them, PCFAA-1250 (prepared with 1250 mesh coal fly ash (CFA)) showed better adsorption performance and the maximum adsorption efficiency even approached 96.5% (C₀ = 10 mg L^-1, m/V = 1.0 g L^-1, T = 298 K, t = 24 h and pH = 3.0), which was higher than most of previous adsorbents. Langmuir and pseudo-second-order models were more likely to be used to determine the removal behavior of uranium on PCFAA, illustrating that the adsorption reaction was uniform chemisorption. Meanwhile, the adsorption process on PCFAA was spontaneous. Notably, the desorption efficiencies of all of PCFAA were more than 80% after five cycles, which suggested that PCFAA possessed good recyclability, especially PCFAA-1250. Besides, the adsorption mechanism was further revealed via XPS and the uranium ions were immobilized on the surface of adsorbents through complexation. Based on above conclusions, it could be concluded that PCFAA-1250 had the potential to be a candidate for the extraction of uranium from wastewater.

Recent Advances in Adsorptive Nanocomposite Membranes for Heavy Metals Ion Removal from Contaminated Water: A Comprehensive Review

Water contamination is one of the most urgent concerns confronting the world today. Heavy metal poisoning of aquatic systems has piqued the interest of various researchers due to the high toxicity and carcinogenic consequences it has on living organisms. Due to their exceptional attributes such as strong reactivity, huge surface area, and outstanding mechanical properties, nanomaterials are being produced and employed in water treatment. In this review, recent advances in the use of nanomaterials in nanoadsorptive membrane systems for wastewater treatment and heavy metal removal are extensively discussed. These materials include carbon-based nanostructures, metal nanoparticles, metal oxide nanoparticles, nanocomposites, and layered double hydroxide-based compounds. Furthermore, the relevant properties of the nanostructures and the implications on their performance for water treatment and contamination removal are highlighted. The hydrophilicity, pore size, skin thickness, porosity, and surface roughness of these nanostructures can help the water permeability of the nanoadsorptive membrane. Other properties such as surface charge modification and mechanical strength can improve the metal adsorption effectiveness of nanoadsorptive membranes during wastewater treatment. Various nanocomposite membrane fabrication techniques are also reviewed. This study is important because it gives important information on the roles of nanomaterials and nanostructures in heavy metal removal and wastewater treatment.

Simultaneous removal of organic and inorganic pollutants from water by Ni/NiO/SnO2 nanoparticles

Herein, we report a facile synthesis of Ni/NiO/SnO₂ hybrids where the core-shell-type Ni/NiO nanoparticle is decorated with the SnO₂ nanoparticle to make a heterojunction and their potential evaluation for simultaneous removal of organic and inorganic pollutants. The metallic nickel core of the nanoparticle helps to separate easily from water magnetically and restricts the possible secondary contamination. The formation of semiconductor-semiconductor heterojunction enhances the photocatalytic activity to degrade the organic pollutants. The nanomaterial was characterized using microscopic, spectroscopic, and BET analyses. Results indicated an efficient degradation of ~ 94% of crystal violet in 40 min. An adsorption capacity of ~ 530 mg g^-1 and ~ 650 mg g^-1 of cadmium and lead ions, respectively, was found for single-component adsorption experiments, and ~ 520 mg g^-1 and ~ 720 mg g^-1 of cadmium and lead ions, respectively, were found for multi-component experiments. This observation suggested that the lead and cadmium ion adsorption process is affected by the synergistic and antagonistic effects, respectively. However, no significant change in the photocatalytic activity was observed for multi-component experiments. Results indicated that the process followed the Langmuir isotherm and pseudo-second-order kinetics irrespective of the number of pollutants present. An excellent adsorption capacity of metal ions and photodegradation capability of organic dye in multi-component solution, and possible reusability of the nanoparticle, make the Ni/NiO/SnO₂ a potential material for simultaneous removal of organic and inorganic pollutants.

Simultaneous adsorption for cationic and anionic dyes using chitosan/electrospun sodium alginate nanofiber composite sponges

The coexistence of anionic and cationic dyes in dye wastewater has highlighted a great necessity to develop amphoteric adsorbents for their simultaneous removal. Herein, an amphoteric composite sponge was successfully fabricated by combining chitosan with electrospun sodium alginate nanofiber using lyophilization in acetic acid/water/dioxane mixed solvents, which owned the abundant functional groups and superior microstructure of interconnected pores and nanoscale fibers, beneficial for the adsorption capacity improvement. The optimum adsorption capacities for Acid Blue-113 and Rhodamine B were 926.2 ± 25.7 mg/g and 695.4 ± 17.0 mg/g, respectively, much higher than that of the controlled sample prepared with chitosan and non-spinning sodium alginate in traditional acetic acid/water solvents. Meanwhile, the sponge provided with the superior adsorption performance under various pH environment and cyclic adsorption. Importantly, it had considerable simultaneous adsorption capacity for binary system containing anionic and cationic dyes. Overall, the chitosan/electrospun sodium alginate nanofiber composite sponge shows potential for complex wastewater treatment.

Advancements in heavy metals removal from effluents employing nano-adsorbents: Way towards cleaner production

Due to the development in science field which gives not only benefit but also introducesundesirable pollution to the environment. This pollution is due to poor discharge activities of industrial effluents into the soil and water bodies, surface run off from fields of agricultural lands, dumping of untreated wastes by municipalities, and mining activites, which deteriorates the cardinal virtue of our environment and causes menace to human health and life. Heavy metal(s), a natural constituent on earth's crust and economic important mineral, due to its recalcitrant effects creates heavy metal pollution which affects food chain and also reduces the quality of water. For this, many researchers have performed studies to find efficient methods for wastewater remediation. One of the most promising methods from economic point of view is adsorption, which is simple in design, but leads to use of a wide range of adsorbents and ease of operations. Due to advances in nanotechnology, many nanomaterials were used as adsorbents for wastewater remediation, because of their efficiency. Many researchers have reported that nanoadsorbents are unmitigatedly a fruitful solution to address this world's problem. This review presents a potent view on various classes of nanoadsorbents and their application to wastewater treatment. It provides a bird's eye view of the suitability of different types of nanomaterials for remediation of wastewater and Backspace gives up-to-date information about polymer based and silica-based nanoadsorbents.

Possibility of Removing Pb and Cd from Polluted Water by Modified Fly Ash

In this study, fly ash (FA) was modified by sodium hydroxide to prepare a new adsorption material (IP) and treat Pb2+- and Cd2+-polluted wastewater. The effect of preparation parameters (mass ratio of FA/NaOH and modification temperature) on IP adsorption performance was investigated. The results indicated that the IP4 showed the highest adsorption capacity prepared at the FA/NaOH mass ratio of 1 : 2 and the roasting temperature of 250°C. The IP4 was characterized by SEM, EDX, XRD, and FTIR analyses. The results showed that the surface morphology and microstructure of FA were significantly changed. Furthermore, in order to study the adsorption performance of Pb2+ and Cd2+ on IP4, the different initial concentrations of Pb2+ and Cd2+, pH, and contact time were analyzed, and the results indicated that IP4 has excellent adsorption capacity for heavy metals. In addition, kinetic model results demonstrated that the adsorption behavior of Pb2+ and Cd2+ on IP4 was better described by a pseudo-second-order model.

Application of Chitosan/Alginate Nanocomposite Incorporated with Phycosynthesized Iron Nanoparticles for Efficient Remediation of Chromium

Biopolymers and nanomaterials are ideal candidates for environmental remediation and heavy metal removal. As hexavalent chromium (Cr⁶⁺) is a hazardous toxic pollutant of water, this study innovatively aimed to synthesize nanopolymer composites and load them with phycosynthesized Fe nanoparticles for the full Cr⁶⁺ removal from aqueous solutions. The extraction of chitosan (Cht) from prawn shells and alginate (Alg) from brown seaweed (Sargassum linifolium) was achieved with standard characteristics. The tow biopolymers were combined and cross-linked (via microemulsion protocol) to generate nanoparticles from their composites (Cht/Alg NPs), which had a mean diameter of 311.2 nm and were negatively charged (−23.2 mV). The phycosynthesis of iron nanoparticles (Fe-NPs) was additionally attained using S. linifolium extract (SE), and the Fe-NPs had semispherical shapes with a 21.4 nm mean diameter. The conjugation of Cht/Alg NPs with SE-phycosynthesized Fe-NPs resulted in homogenous distribution and stabilization of metal NPs within the polymer nanocomposites. Both nanocomposites exhibited high efficiency as adsorbents for Cr⁶⁺ at diverse conditions (e.g., pH, adsorbent dose, contact time and initial ion concentration) using batch adsorption evaluation; the most effectual conditions for adsorption were a pH value of 5.0, adsorbent dose of 4 g/L, contact time of 210 min and initial Cr⁶⁺ concentration of 75 ppm. These factors could result in full removal of Cr⁶⁺ from batch experiments. The composited nanopolymers (Cht/Alg NPs) incorporated with SE-phycosynthesized Fe-NPs are strongly recommended for complete removal of Cr⁶⁺ from aqueous environments.

Aqueous Adsorption of Heavy Metals on Metal Sulfide Nanomaterials: Synthesis and Application

Heavy metals pollution of aqueous solutions generates considerable concerns as they adversely impact the environment and health of humans. Among the remediation technologies, adsorption with metal sulfide nanomaterials has proven to be a promising strategy due to their cost-effective, environmentally friendly, surface modulational, and amenable properties. Their excellent adsorption characteristics are attributed to the inherently exposed sulfur atoms that interact with heavy metals through various processes. This work presents a comprehensive overview of the sequestration of heavy metals from water using metal sulfide nanomaterials. The common methods of synthesis, the structures, and the supports for metal sulfide nano-adsorbents are accentuated. The adsorption mechanisms and governing conditions and parameters are stressed. Practical heavy metal remediation application in aqueous media using metal sulfide nanomaterials is highlighted, and the existing research gaps are underscored.

Comparative research on selective adsorption of Pb(II) by biosorbents prepared by two kinds of modifying waste biomass: Highly-efficient performance, application and mechanism

In this study, we used xanthate to modify two waste biomass materials (corn cob and chestnut shell) and prepared them as biosorbents in one step for effectively removing Pb(II) from aqueous solutions containing only Pb(II) or Pb(II), Cu(II) and Cd(II). The two biosorbents were characterized by SEM, EDS, FTIR and Zeta potential analysis, and the results of the characterization were used to explore the adsorption mechanism of Pb(II) on biosorbents. We compare the Pb(II) removal ability of the two biosorbents and the investigated factors that affect Pb(II) removal. The results show that the adsorption capacity of xanthate modified corn cob (X-CC) and xanthate modified chestnut shell (X-CS) for Pb(II) is related to pH, reaction time, temperature and initial concentrations of both adsorbent and adsorbate. The adsorption of Pb(II) on X-CC and X-CS follows Langmuir isotherm equation and quasi-secondary kinetic equation, and their fitted q_m values are 166.39 and 124.84 mg g^-1, respectively. The analysis shows that the biosorbent has high selectivity to Pb(II) rather than Cu(II) and Cd(II), and still maintains a high removal rate of Pb(II) in actual wastewater. The biosorbents remove metal ions mainly through ion exchange reaction and the functional group in the material complexes with the metal to form micro-precipitation. The high adsorption capacity in aqueous solution and low costs in the manufacturing process of the present biosorbents ensure that they have great potential in practical applications for treating heavy-metal contaminated surface water.

Carbohydrate biopolymers, lignin based adsorbents for removal of heavy metals (Cd2+, Pb2+, Zn2+) from wastewater, regeneration and reuse for spent adsorbents including latent fingerprint detection: A review

Living organisms are created by carbohydrate biopolymers such as chitosan, carboxymethyl cellulose, alginate and lignin. These carbohydrate biopolymers have been extensively used for environmental applications because they are bio-degradable, bio-compatible, non-toxic and inexpensive. Recently, carbohydrate biopolymers have been used to prepare different nanocomposite adsorbents for treatment of wastewater. These adsorbents explored the removal effectiveness of inorganic pollutants from aqueous solution. This review article discusses the synthesis and application of chitosan, carboxymethyl cellulose, alginate and lignin nanocomposites as adsorbents for heavy metals. Toxic metals can be efficiently absorbed by cross-linkers, distributed in aqueous solutions of divalent heavy metal ions to examine their polymer absorption capacity. These nanocomposites were used for the adsorption of highly toxic metals such as Cd2+, Pb2+ and Zn2+ in water. To make heavy metal ion uptake more effective, more functionalization has been implemented such as blending, grafting, or mixing with different nanomaterials with an extra functional group. The integration of the second part into the main polymer chain not only adds functionality but also increases mechanical efficiency, one of the core criteria for adsorbent recyclability. The remediation method of metal ions from wastewater is cheaper as long as the adsorbent is reused. Furthermore, they exhibited good performance for the reuse of spent adsorbents after adsorption-desorption processes including latent fingerprint detection with nanomaterials by using the powder dusting method. Chitosan, carboxymethyl cellulose, alginate and lignin based nanocomposites have demonstrated better adsorption activities due to great physical and chemical properties for the chelation of heavy metals such as Cd2+, Pb2+ and Zn2+ from water and also higher regeneration with various eluents after several desorption-adsorption cycles. In addition, reuse of the spent adsorbents in latent fingerprint detection with different nanomaterials is discussed. Finally, this review article makes recommendations for future studies in light of environmentally favourable and economical applications.

Recent Developments in Chitosan-Based Adsorbents for the Removal of Pollutants from Aqueous Environments

The quality of water is continuously under threat as increasing concentrations of pollutants escape into the aquatic environment. However, these issues can be alleviated by adsorbing pollutants onto adsorbents. Chitosan and its composites are attracting considerable interest as environmentally acceptable adsorbents and have the potential to remove many of these contaminants. In this review the development of chitosan-based adsorbents is described and discussed. Following a short introduction to the extraction of chitin from seafood wastes, followed by its conversion to chitosan, the properties of chitosan are described. Then, the emerging chitosan/carbon-based materials, including magnetic chitosan and chitosan combined with graphene oxide, carbon nanotubes, biochar, and activated carbon and also chitosan-silica composites are introduced. The applications of these materials in the removal of various heavy metal ions, including Cr(VI), Pb(II), Cd(II), Cu(II), and different cationic and anionic dyes, phenol and other organic molecules, such as antibiotics, are reviewed, compared and discussed. Adsorption isotherms and adsorption kinetics are then highlighted and followed by details on the mechanisms of adsorption and the role of the chitosan and the carbon or silica supports. Based on the reviewed papers, it is clear, that while some challenges remain, chitosan-based materials are emerging as promising adsorbents.

Enhanced heavy metal removal from an aqueous environment using an eco-friendly and sustainable adsorbent

Thiol-lignocellulose sodium bentonite (TLSB) nanocomposites can effectively remove heavy metals from aqueous solutions. TLSB was formed by using -SH group-modified lignocellulose as a raw material, which was intercalated into the interlayers of hierarchical sodium bentonite. Characterization of TLSB was then performed with BET, FTIR, XRD, TGA, PZC, SEM, and TEM analyses. The results indicated that thiol-lignocellulose molecules may have different influences on the physicochemical properties of sodium bentonite, and an intercalated-exfoliated structure was successfully formed. The TLSB nanocomposite was subsequently investigated to validate its adsorption and desorption capacities for the zinc subgroup ions Zn(II), Cd(II) and Hg(II). The optimum adsorption parameters were determined based on the TLSB nanocomposite dosage, concentration of zinc subgroup ions, solution pH, adsorption temperature and adsorption time. The results revealed that the maximum adsorption capacity onto TLSB was 357.29 mg/g for Zn(II), 458.32 mg/g for Cd(II) and 208.12 mg/g for Hg(II). The adsorption kinetics were explained by the pseudo-second-order model, and the adsorption isotherm conformed to the Langmuir model, implying that the dominant chemical adsorption mechanism on TLSB is monolayer coverage. Thermodynamic studies suggested that the adsorption is spontaneous and endothermic. Desorption and regeneration experiments revealed that TLSB could be desorbed with HCl to recover Zn(II) and Cd(II) and with HNO3 to recover Hg(II) after several consecutive adsorption/desorption cycles. The adsorption mechanism was investigated through FTIR, EDX and SEM, which demonstrated that the introduction of thiol groups improved the adsorption capacity. All of these results suggested that TLSB is an eco-friendly and sustainable adsorbent for the extraction of Zn(II), Cd(II) and Hg(II) ions in aqueous media.

Preparation of a novel iron-based biochar composite for removal of hexavalent chromium in water

The chitosan-stabilized ferrous sulfide nanoparticles were loaded on biochar to prepare a composite material FeS-CS-BC for effective removal of hexavalent chromium in water. BC and FeS-CS-BC were characterized by Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) analyses. Batch experiments were employed to evaluate the Cr(VI) removal performance. The experimental results showed that the removal rate of Cr(VI) by FeS-CS-BC(FeS:CS:BC = 2:2:1) reached 98.34%, which was significantly higher than that of BC (44.58%) and FeS (79.91%). In the pH range of 2-10, the removal of Cr(VI) by FeS-CS-BC was almost independent of pH. The limitation of coexisting anions (Cl^-、SO₄^2-、NO₃^-) on Cr(VI) removal was not too obvious. The removal of Cr(VI) by FeS-CS-BC was fitted with the pseudo-second-order dynamics, which was a hybrid chemical-adsorption reaction. The X-ray photoelectron spectroscopy (XPS) analysis result showed that Cr(VI) was reduced, and the reduced Cr(VI) was fixed on the surface of the material in the form of Cr(VI)-Fe(III). Graphical abstract Removal of hexavalent chromium from wastewater by FeS-CS-BC composite synthesized by impregnation.

Potential of removing Cd(II) and Pb(II) from contaminated water using a newly modified fly ash

Modified fly ash was prepared through low-temperature roasting method using NaOH as activator. The techniques of Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS) and the X-ray diffraction (XRD) were introduced to analyze the chemical and physical performance of samples, respectively. It was found that a significant improvements in activity and specific surface area of adsorbent. This work systematically reported the uptake performances of modified materials for single and two mixed toxic cations Pb(II) and Cd(II). The results unveiled that pseudo-second-order model was suitable to analyze the adsorption process. The adsorption process were better fitted by Langmuir model and the maximum uptake capacities were 126.55 and 56.31 mg g^-1 for Pb(II) and Cd(II) in single system at 298 K, respectively. Additionally, in mixed solution, the maximum uptake capacity reduced to 120.48 and 36.10 mg g^-1 under the same adsorption conditions. Competitive adsorption results demonstrated that adsorption ability was restricted by other metal ions, as while as, the binding affinity of two cations followed the order of Pb(II)>Cd(II). Meanwhile, the co-existed cations as Ca(II), Mg(II) Na(I) and K(I) had antagonistic effects on the uptake of Cd(II) and Pb(II). The results indicate that the modified fly ash was a low-cost and effective adsorbent for the cleaning up metal ions in wastewater, which has a promising application prospect.

Facile fabrication of a low-cost and environmentally friendly inorganic-organic composite membrane for aquatic dye removal

This study reports a new inorganic-organic composite membrane fabricated by an electrostatic self-assembling method. The low-cost and eco-friendly porous geopolymer (PG) was chosen as a support, on which chitosan (CS), a "green" biomaterial, was used to form an active layer. With optimum dosage of CS (2.0 mL of 1.0% CS solution), the obtained CS/PG membrane exhibited a high porosity of 50.97% with an average pore diameter of 13.93 nm as well as a high water flux of 1663.82 ± 22.46 L/m²·h·bar. The effects of initial concentration, pH, flow rate and temperature of the feed solution on crystal violet (CV) removal by the CS/PG were evaluated in a continuous mode. The results indicated ~95% CV could be removed from water during continuous treating of 14 h. The effectiveness in CV removal by the CS/PG membrane was attributed to the synergistic effect of rejection and adsorption. Furthermore, the composite membrane could be easily regenerated for prolonged use. Overall, this work opens a new possibility of building cost-saving and eco-friendly composite membranes for practical applications in water purification.

Removal of heavy metals in aquatic environment by graphene oxide composites: a review

As the most important graphene derivate, graphene oxide (GO) is a high-efficient adsorbent for the removal of heavy metals in aquatic environment due to its abundant oxygen functional groups, enormous specific area, and strong hydrophilia. However, there are some drawbacks, such as easily aggregating and difficult separation, restricting the environmental application of GO. GO is not a suitable adsorbent by itself. Hence, some materials were used to synthesize GO composites, and GO composites are commonly characterized by high adsorption capacity to overcome the above drawbacks. This review discusses five main GO composites-GO-chitosan, GO-alginate, GO-SiO₂, NZVI-rGO, and magnetic GO composites-and summarizes the synthesis methods of GO composites and its application for the removal of heavy metals in aquatic environments. The influencing factors, adsorption capacities, and mechanisms related to the removal of heavy metals by GO composites are highlighted. Lastly, the application potentials and challenges of GO composites for aqueous environmental remediation are discussed. Graphical abstract.

Synthesis of chitosan-ethylene glycol diglycidyl ether/TiO2 nanoparticles for adsorption of reactive orange 16 dye using a response surface methodology approach

Chitosan-ethylene glycol diglycidyl ether/TiO₂ nanoparticles (CS-EGDE/TNP) composite was synthesized to be biosorbent for the removal of reactive orange 16 (RO16) dye from aqueous solution. The CS-EGDE/TNP composite was characterized via BET, XRD, FTIR, and SEM-EDX techniques. Response surface methodology (RSM) with Box-Behnken design (BBD) was applied to optimize the adsorption key parameters such as adsorbent dose (A: 0.02-0.08 g/L), RO16 dye concentration (B: 20-80 mg/L), solution pH (C: 4-10), temperature (D: 30-50 °C), and contact time (E: 30-90 min). The adsorption isotherm followed Freundlich model and pseudo-second order (PSO) kinetic model. The adsorption capacity of CS-EGDE/TNP for RO16 dye was 1407.4 mg/g at 40 °C. The adsorption mechanism of RO16 dye on the surface of CS-EGDE/TNP can be attributed to various interactions such as electrostatic attraction, n-π interaction, Yoshida H-bonding, and H-bonding. Results supported the potential use of CS-EGDE/TNP as effective adsorbent for the treatment of acid reactive dye.

Adsorption of Cr(III) and Pb(II) by graphene oxide/alginate hydrogel membrane: Characterization, adsorption kinetics, isotherm and thermodynamics studies

Graphene oxide/alginate hydrogel membranes (GAHMs) were prepared by cross-linking a casting solution (blending graphene oxide, sodium alginate and urea) with a calcium chloride solution. The adsorption performance and mechanism for the removel of Cr(III) and Pb(II) were investigated. The GAHMs, before and after adsorption, were characterized by FT-IR, SEM, EDX and XPS, and their hydrophilicity was determined. The kinetics, isotherm and thermodynamics models were introduced. Results indicated that the optimal pH for the membranes removing Cr(III) and Pb(II) was 6.0 and 5.0 respectively. The adsorption capacity for both metal ions was positively correlated with the initial concentration and contact time and their adsorption was consistent with the pseudo-second-order kinetic model. The Langmuir isotherm better described the adsorption equilibrium. Moreover, the Langmuir model showed that the maximum adsorption capacity for Pb(II) was better than that for Cr(III) (327.9 and 118.6 mg/g, respectively). Thermodynamics analysis showed that the adsorption for Cr(III) by GAHMs was endothermic, whereas that of Pb(II) was exothermic. After five adsorption-desorption cycles, a high adsorption efficiency for both metal ions was maintained. This novel membrane material (GAHMs) is potentially an effective membrane adsorbent for the removal of Cr(III) and Pb(II) ions in practical applications.

Removal of Hexavalent Chromium from Aqueous Solutions Using Sulfonated Peat

Peat, a loose and porous material, contains rich organic matter and can be used as an adsorbent. In this study, it is chemically modified by adding sulfuric acid under different conditions, with the aim of producing a modified peat with optimized Cr(VI) adsorption capability. The modified peat exhibited a higher adsorption efficiency than the natural peat throughout the adsorption experiments. The adsorption of Cr(VI) from aqueous solutions correlates with the pseudo-second order kinetic model. In addition, the Langmuir model indicated a maximum loading capacity approximately of 105.4 mg/g, which is a markedly high value compared to some other reported adsorbents. The present study performed single factor experiments and the results indicated that higher temperature conditions result in better adsorption capability, whilst an increase in the pH played a contrary role. According to the orthogonal tests, the pH had the greatest impact on adsorption. The obtained results indicated that sulfonated peat can be effectively applied in removing Cr (VI).

A Simple Low-Cost Method to Prepare Lignocellulose-Based Composites for Efficient Removal of Cd(II) from Wastewater

The fabrication of functional lignocellulose-based materials has drawn considerable attention because it acts as a green separation/absorption material owing to its multi-porous mesostructure. In this study, a surface functionalized lignocellulose-based adsorbent for the highly efficient capture of Cd(II) ions was prepared through facile in situ co-deposition of wood waste-derived saw powder (SP) in the presence of tannic acid (TA) and aminopropyltriethoxysilane (APTES) mixed aqueous solution. The SP was first modified using TA-APTES coating to synthesize the functional SP substrate (SP-(TA-APTES)). The SP-(TA-APTES) hybrids served as reactive platforms, which enabled further decoration with amino-rich polyethylenimine (PEI) due to the outstanding secondary reactions of the TA-APTES layer. The surface morphology of the resulting SP-(TA-APTES)-PEI (SP-TAPI) composites were investigated using Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Significantly, the combined advantages of the lignocellulosic skeleton, the layer-particle structure, and the hybrid coating contributed to the enhanced adsorption capacity of Cd(II) (up to 22.66 mg/g at pH = 5.0). This removal capacity was higher than that of most reported agricultural waste-based or lignocellulose-based materials. The Cd(II) adsorption mechanism of the surface-modified SP-TAPI composites was studied in detail. These results provide new insights into the high value-added utilization of agricultural waste for water purification applications.

Box-Behnken design to optimize the synthesis of new crosslinked chitosan-glyoxal/TiO2 nanocomposite: Methyl orange adsorption and mechanism studies

A crosslinked chitosan-glyoxal/TiO₂ nanocomposite (CCG/TNC) was synthesized by loading different ratios of TiO₂ nanoparticles into polymeric matrix of crosslinked chitosan-glyoxal (CCG) to be a promising biosorbent for methyl orange (MO). Box-Behnken design (BBD) in response surface methodology (RSM) was applied to optimize various process parameters, viz., loading of TiO₂ nanoparticles into CCG polymeric matrix (A: 0%-50%), adsorbent dose (B: 0.04-0.14 g/50 mL), solution pH (C: 4-10), and temperature (D: 30-50 °C). The highest MO removal efficiency of 75.9% was observed by simultaneous interactions between AB, AC, and BC. The optimum TiO₂ loading, adsorbent dosage, solution pH, and temperature were (50% TiO₂: 50% chitosan labeled as CCG/TNC-50), 0.09 g/50 mL, 4.0, and 40 °C. The adsorption of MO from aqueous solution by using CCG/TNC-50 in batch mode was evaluated. The kinetic results were well described by the pseudo-first order kinetic, and the equilibrium data were in agreement with Langmuir isotherm model with maximum adsorption capacity of 416.1 mg/g. The adsorption mechanism included electrostatic attractions, n-π stacking interactions, dipole-dipole hydrogen bonding interactions, and Yoshida H-bonding.

An activation-free route to porous magnetic carbon adsorbents for the removal of phenolic compounds

Magnetic composite carbon xerogels were synthesized via acidic gelation of resorcinol and furfural in the presence of carbon-encapsulated iron nanoparticles with subsequent carbonization of the as-obtained magnetic organic xerogel.