Highly sensitive and selective ion-imprinted polymers based on one-step electrodeposition of chitosan-graphene nanocomposites for the determination of Cr(VI)

Preparation of a novel DNA-imprinted sensor based on chitosan and its highly sensitive detection of Pb2

Lead ion is very harmful to the environment, so it is very important to study its detection methods. In this study, a novel electrochemical sensor was constructed by modifying deoxyribonucleic acid (DNA) on the electrode, which can be used for the detection of Pb2+ in the environment. Part of the mixed solution of chitosan (CS) and Pb2+ template ions was dropped onto the surface of a glassy carbon electrode. CS-Pb2+ film was cross-linked through sodium tripolyphosphate. And a novel DNA-imprinted sensor was prepared by electrodepositing CS-Pb2+ thin film with gold nanoparticles (AuNPs), removing Pb2+ templates, and immobilizing specific double-stranded DNA. The electroactive area, surface morphology, sensitivity, and electrochemical reaction mechanism of the DNA-imprinted sensor were analyzed. The elementary reaction steps were studied through electrochemical reaction kinetics analysis. The experimental results indicate that the DNA-imprinted electrochemical biosensor can quantitatively detect Pb2+ in the range of 10-100 μM (R2 = 0.9935), and its detection limit is 6.5074 μM (3σ/slope). The sensitivity of the electrochemical biosensor is 1.55233 × 10-6 A/μM, and its active areas is 6.233 cm2. The desorption mechanism and adsorption mechanism have been explored through dynamic parameter analysis. The novel DNA imprinted electrochemical biosensor developed in this paper provides a robust method for detecting lead ions in solution. Additionally, it establishes a solid groundwork for detecting other metal ions.

Cr-Detector: A simple chemosensing system for onsite Cr (VI) detection in water

Due to the increase in urbanization and industrialization, the load of toxicants in the environment is alarming. The most common toxicants, including heavy metals and metalloids such as hexavalent Chromium, have severe pathophysiological impacts on humans and other aquatic biotas. Therefore, developing a portable rapid detection device for such toxicants in the aquatic environment is necessary. This work portrays the development of a field-portable image analysis device coupled with 3,3',5,5'-tetramethylbenzidine (TMB) as a sensing probe for chromium (VI) detection in the aquatic ecosystem. Sensor parameters, such as reagent concentration, reaction time, etc., were optimized for the sensor development and validation using a commercial UV-Vis spectrophotometer. The chemoreceptor integrated with a uniform illumination imaging system (UIIS) revealed the system's applicability toward Cr(VI) detection. The calibration curve using the R-value of image parameters allows Cr(VI) detection in the linear range of 25 to 600 ppb, which covers the prescribed permissible limit by various regulatory authorities. Furthermore, the adjusted R2 = 0.992 of the linear fit and correlation coefficients of 0.99018 against the spectrophotometric method signifies the suitability of the developed system. This TMB-coupled field-portable sensing system is the first-ever reported image analysis-based technology for detecting a wide range of Cr(VI) in aquatic ecosystems to our knowledge.

Recent advances in the modification of electrodes for trace metal analysis: a review

This review paper summarizes the research published in the last five years on using different compounds and/or materials as modifiers for electrodes employed in trace heavy metal analysis. The main groups of modifiers are identified, and their single or combined application on the surface of the electrodes is discussed. Nanomaterials, film-forming substances, and polymers are among the most used compounds employed mainly in the modification of glassy carbon, screen-printed, and carbon paste electrodes. Composites composed of several compounds and/or materials have also found growing interest in the development of modified electrodes. Environmentally friendly substances and natural products (mainly biopolymers and plant extracts) have continued to be included in the modification of electrodes for trace heavy metal analysis. The main analytical performance parameters of the modified electrodes as well as possible interferences affecting the determination of the target analytes, are discussed. Finally, a critical evaluation of the main findings from these studies and an outlook discussing possible improvements in this area of research are presented.

Ion-Imprinted Polymeric Materials for Selective Adsorption of Heavy Metal Ions from Aqueous Solution

The introduction of selective recognition sites toward certain heavy metal ions (HMIs) is a great challenge, which has a major role when the separation of species with similar physicochemical features is considered. In this context, ion-imprinted polymers (IIPs) developed based on the principle of molecular imprinting methodology, have emerged as an innovative solution. Recent advances in IIPs have shown that they exhibit higher selectivity coefficients than non-imprinted ones, which could support a large range of environmental applications starting from extraction and monitoring of HMIs to their detection and quantification. This review will emphasize the application of IIPs for selective removal of transition metal ions (including HMIs, precious metal ions, radionuclides, and rare earth metal ions) from aqueous solution by critically analyzing the most relevant literature studies from the last decade. In the first part of this review, the chemical components of IIPs, the main ion-imprinting technologies as well as the characterization methods used to evaluate the binding properties are briefly presented. In the second part, synthesis parameters, adsorption performance, and a descriptive analysis of solid phase extraction of heavy metal ions by various IIPs are provided.

A Novel Aptamer-Imprinted Polymer-Based Electrochemical Biosensor for the Detection of Lead in Aquatic Products

Lead contamination in aquatic products is one of the main hazard factors. The aptasensor is a promising detection method for lead ion (Pb(II)) because of its selectivity, but it is easily affected by pH. The combination of ion-imprinted polymers(IIP) with aptamers may improve their stability in different pH conditions. This paper developed a novel electrochemical biosensor for Pb(II) detection by using aptamer-imprinted polymer as a recognition element. The glassy carbon electrode was modified with gold nanoparticles and aptamers. After the aptamer was induced by Pb(II) to form a G-quadruplex conformation, a chitosan-graphene oxide was electrodeposited and cross-linked with glutaraldehyde to form an imprint layer, improving the stability of the biosensor. Under the optimal experimental conditions, the current signal change (∆I) showed a linear correlation of the content of Pb(II) in the range of 0.1-2.0 μg/mL with a detection limit of 0.0796 μg/mL (S/N = 3). The biosensor also exhibited high selectivity for the determination of Pb(II) in the presence of other interfering metal ion. At the same time, the stability of the imprinted layer made the sensor applicable to the detection environment with a pH of 6.4-8.0. Moreover, the sensor was successfully applied to the detection of Pb(II) in mantis shrimp.

Nanomaterials-Based Ion-Imprinted Electrochemical Sensors for Heavy Metal Ions Detection: A Review

Heavy metal ions (HMIs) pose a serious threat to the environment and human body because they are toxic and non-biodegradable and widely exist in environmental ecosystems. It is necessary to develop a rapid, sensitive and convenient method for HMIs detection to provide a strong guarantee for ecology and human health. Ion-imprinted electrochemical sensors (IIECSs) based on nanomaterials have been regarded as an excellent technology because of the good selectivity, the advantages of fast detection speed, low cost, and portability. Electrode surfaces modified with nanomaterials can obtain excellent nano-effects, such as size effect, macroscopic quantum tunneling effect and surface effect, which greatly improve its surface area and conductivity, so as to improve the detection sensitivity and reduce the detection limit of the sensor. Hence, the present review focused on the fundamentals and the synthetic strategies of ion-imprinted polymers (IIPs) and IIECSs for HMIs detection, as well as the applications of various nanomaterials as modifiers and sensitizers in the construction of HMIIECSs and the influence on the sensing performance of the fabricated sensors. Finally, the potential challenges and outlook on the future development of the HMIIECSs technology were also highlighted. By means of the points presented in this review, we hope to provide some help in further developing the preparation methods of high-performance HMIIECSs and expanding their potential applications.

Use of a nano-porous gold film electrode modified with chitosan / polypyrrole for electrochemical determination of metronidazole in the Presence of Acetaminophen

This study, it was aimed to provide a sensitive, easy and selective method for designing Nano-porous gold film electrode (NPGF) electrode for simultaneous measurement of metronidazole (MT) and acetaminophen (AC). For this purpose, the NPGF electrode surface was modified with chitosan (CS) and poly pyrrole (PPY) by electrochemical method, and then CS and PPY modified NPGF (PPY-CS-NPGF) electrode were used to measure these drugs. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) are employed for the characterization of the attained PPY-CS-NPGF electrode. Using cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS) and chronoamperometry, the electrochemical behavior of MT was investigated with the modified electrode. By differential pulse voltammetry, linear ranges of concentration 0.005-100 μM with linear coefficients of 0.9898 and a detection limit of 0.0009 μM were obtained for MT. Finally, an electrochemical sensor was used to measure MT in a real sample, which yielded acceptable results. PPY-CS-NPGF electrodes have a wide linear range, high selectivity, sensitivity and stability and can be used successfully to determine these drugs.

Chitosan-based molecularly imprinted photoelectric sensor with ZnO/Bi2O3/Bi2S3 sensing layer for thiamethoxam determination

A molecularly imprinted photoelectrochemical sensor with high sensitivity and stable structure was constructed and applied to detect thiamethoxam pesticide. ZnO/Bi₂O₃/Bi₂S₃ heterojunction photoelectric material was formed on the fluorine-doped tin oxide (FTO) electrode by seed layer growth, drip coating, and in situ ion exchange. A chitosan-imprinted polymer membrane was prepared using chitosan as the functional monomer, glutaraldehyde as the cross-linking agent, and thiamethoxam as the template molecule. The photoelectric material was characterized by X-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy analyses. The electron transfer mechanism of Z-type heterojunction was verified by ultraviolet-visible curve and Mott-Schottky curve. When thiamethoxam was re-adsorbed on the imprinted membrane, the current recorded at 0 V (vs. Ag/AgCl) was reduced because the thiamethoxam molecule blocked the electron transfer. The molecularly imprinted sensor exhibited a linear relationship to thiamethoxam concentration in the range from 7.0 × 10^-13 mol/L to 7.0 × 10^-10 mol/L and the detection limit was 3.32 × 10^-13 mol/L, which is lower than the values reported by other detection methods. Most pesticides, such as propoxur and isoprocarband carbaryl, do not interfere with the determination. The sensor also showed good practicability and suitability for the determination of trace thiamethoxam in environmental water and soil leaching solutions, with a recovery of 99.6-102.1% (RSD < 3.74%). A novel molecularly imprinted photoelectrochemical (MI-PEC) sensor with high sensitivity and selectivity for the determination of thiamethoxam (TMX) was developed. A Z-type heterojunction ZnO/Bi₂O₃/Bi₂S₃ photoelectric material was synthesized for the first time. The MI-PEC sensor was prepared with ZnO/Bi₂O₃/Bi₂S₃ as the sensitive material and MI membrane as the recognition element. The sensor exhibits an extremely sensitive response to thiamethoxam with a detection limit of 3.32 × 10^-13 mol/L due to the excellent photoelectrochemical properties of ZnO/Bi₂O₃/Bi₂S₃.

A silanized magnetic amino-functionalized carbon nanotube-based multi-ion imprinted polymer for the selective aqueous decontamination of heavy metal ions

A novel adsorbent comprising a silanized magnetic amino-functionalized carbon nanotube-based multi-ion imprinted polymer is introduced as an ideal candidate for the simultaneous and selective adsorptive remediation of heavy metal ions from contaminated water.

An ion imprinting technology-assisted rotational microfluidic hybrid chip for the fluorescence detection of hexavalent chromium ions

An ion imprinted fluorescence sensing rotational microfluidic paper- and cloth-based hybrid chip was developed for hexavalent chromium detection.

Magnetic Ion Imprinted Polymers (MIIPs) for Selective Extraction and Preconcentration of Sb(III) from Environmental Matrices

Antimony(III) is a rare element whose chemical and toxicological properties bear a resemblance to those of arsenic. As a result, the presence of Sb(III) in water might have adverse effects on human health and aquatic life. However, Sb(III) exists at very ultra-trace levels which may be difficult for direct quantification. Therefore, there is a need to develop efficient and reliable selective extraction and preconcentration of Sb(III) in water systems. Herein, a selective extraction and preconcentration of trace Sb(III) from environmental samples was achieved using ultrasound assisted magnetic solid-phase extraction (UA-MSPE) based on magnetic Sb(III) ion imprinted polymer-Fe3O4@SiO2@CNFs nanocomposite as an adsorbent. The amount of antimony in samples was determined using inductively coupled plasma optical emission spectrometry (ICP-OES). The UA-MSPE conditions were investigated using fractional factorial design and response surface methodology based on central composite design. The Sb(III)-IIP sorbent displayed excellent selectivity towards Sb(III) as compared to NIIP adsorbent. Under optimised conditions, the enrichment factor, limit of detection (LOD) and limit of quantification (LOQ) of UA-MSPE/ICP-OES for Sb(III) were 71.3, 0.13 µg L-1 and 0.44 µg L-1, respectively. The intra-day and inter-day precision expressed as relative standard deviations (%RSDs, n = 10 and n = 5) were 2.4 and 4.7, respectively. The proposed analytical method was applied in the determination of trace Sb(III) in environmental samples. Furthermore, the accuracy of the method was evaluated using spiked recovery experiments and the percentage recoveries ranged from 95-98.3%.

Application of Molecularly Imprinted Polymers in the Analysis of Waters and Wastewaters

The increase of the global population and shortage of renewable water resources urges the development of possible remedies to improve the quality and reusability of waste and contaminated water supplies. Different water pollutants, such as heavy metals, dyes, pesticides, endocrine disrupting compounds (EDCs), and pharmaceuticals, are produced through continuous technical and industrial developments that are emerging with the increasing population. Molecularly imprinted polymers (MIPs) represent a class of synthetic receptors that can be produced from different types of polymerization reactions between a target template and functional monomer(s), having functional groups specifically interacting with the template; such interactions can be tailored according to the purpose of designing the polymer and based on the nature of the target compounds. The removal of the template using suitable knocking out agents renders a recognition cavity that can specifically rebind to the target template which is the main mechanism of the applicability of MIPs in electrochemical sensors and as solid phase extraction sorbents. MIPs have unique properties in terms of stability, selectivity, and resistance to acids and bases besides being of low cost and simple to prepare; thus, they are excellent materials to be used for water analysis. The current review represents the different applications of MIPs in the past five years for the detection of different classes of water and wastewater contaminants and possible approaches for future applications.

Electrophoretic deposition and characterization of chitosan-molybdenum composite coatings

In this paper, the effect of the electric field on the properties of a new chitosan-molybdenum (Chit-Mo) composite coating obtained by electrophoretic deposition (EPD) was investigated. The composite coatings obtained showed different morphologies depending on the conditions used during the deposition process. Chemical composition results and microstructure analysis showed homogeneous distribution of molybdenum in a chitosan matrix. Corrosion test results showed that the Chit-Mo composite coatings can increase corrosion resistance of 1020 steel in NaCl medium (3.5 %). The coatings obtained at 5 V, pH 5.5, and using a low concentration of reagents (suspension 1: chitosan 0.5 g/L and 1 mM sodium molybdate) reached an inhibition efficiency of up to 76.7 %. Therefore, the results obtained in this work prove the achievement of a new class of chitosan-based composite materials with potential application in the protection of metal structures against corrosion.

Preparation of PP-g-(AA-MAH) Fibers Using Suspension Grafting and Melt-Blown Spinning and its Adsorption for Aniline

This paper uses polypropylene (PP) as the matrix and acrylic acid (AA) and maleic anhydride (MAH) as functional monomers to prepare PP-g-(AA-MAH) fibers by suspension grafting and melt-blown spinning technology that are easy to industrially scale-up. The fibers can be used to adsorb aniline. Results showed that the grafting ratio reached the maximum of 12.47%. The corresponding optimal conditions were grafting time of 3 h, AA: MAH = 0.75, total monomer content of 55%, benzoyl peroxide 1.4%, xylene concentration of 6 mL/g PP, and deionized water content of 8 mL/g PP. Owing to its good fluidity and thermal stability, the product of suspension grafting can be used for melt-blown spinning. Infrared spectroscopic and nuclear magnetic resonance spectroscopic analyses indicated that AA and MAH were successfully grafted onto PP fibers. After grafting, the hydrophilicity of PP-g-(AA-MAH) fiber increased. Therefore, it had higher absorptivity for aniline and the adsorption capacity could reach 42.2 mg/g at 45 min and pH = 7. Moreover, the PP-g-(AA-MAH) fibers showed good regeneration performance.

Recent Advances in Electrochemical Monitoring of Chromium

The extensive use of chromium by several industries conducts to the discharge of an immense quantity of its various forms in the environment which affects drastically the ecological and biological lives especially in the case of hexavalent chromium. Electrochemical sensors and biosensors are useful devices for chromium determination. In the last five years, several sensors based on the modification of electrode surface by different nanomaterials (fluorine tin oxide, titanium dioxide, carbon nanomaterials, metallic nanoparticles and nanocomposite) and biosensors with different biorecognition elements (microbial fuel cell, bacteria, enzyme, DNA) were employed for chromium monitoring. Herein, recent advances related to the use of electrochemical approaches for measurement of trivalent and hexavalent chromium from 2015 to 2020 are reported. A discussion of both chromium species detections and speciation studies is provided.

Polyaniline/Ag nanoparticles/graphene oxide nanocomposite fluorescent sensor for recognition of chromium (VI) ions

Selective determination of toxic hexavalent chromium (Cr(VI)) is a stringent important due to its huge negative impact on the health and environment. Recently, the high sensitivity, rapidness, and cost-effectiveness of the fluorescent sensors for Cr(VI) have been developed. A fluorescent nanocomposite (NC) has been synthesized based on doped polyaniline (PANI), 2-acrylamido-2-methylpropanesulfonic acid (AMPSA) capped Ag nanoparticles (NPs) and graphene oxide (GO) quantum dots (QDs) via in situ reaction for highly selective sensing of Cr(VI) ions based on the luminescent quenching in the range from 0.01 to 7.5 mg/L. This NC showed an emission peak at 348 nm with a linear range from 0.01 to 0.05 mg/L and the low limit of detection (LOD) was 0.0065 mg/L (~ 6 µg/L). PANI/Ag (AMPSA) GO QDs NC displayed high selectivity for Cr(VI) over other common metal ions. Notably, the PANI/Ag (AMPSA) GO QDs NC can be used for distinguishing Cr(VI) and Cr(III) in solutions. The sensitive determination of Cr(VI) in real surface water samples was also confirmed and demonstrated recoveries in the range 95.3-99.2%. This NC will emerge as a new class of fluorescence materials that could be suitable for practical applications.

Facile synthesis of carboxymethyl cellulose sulfur quantum dots for live cell imaging and sensitive detection of Cr(VI) and ascorbic acid

Nowadays the synthesis of stable fluorescent sulfur quantum dots (SQDs) remains a big challenge. Herein, the utilization of carboxymethyl cellulose (CMC) to synthesis of SQDs is reported. Benefiting from the unique composition and structure of CMC macromolecule, the resulted CMC-SQDs simultaneously show high aqueous dispersibility and stability, tunable emission, stable fluorescence and low cytotoxicity, which make them promising for working as a fluorescent probe. Fluorescence detection experiments suggested that the CMC-SQDs could serve as a fluorescence on-off-on switch to sensitive and selective detection of Cr(VI) and ascorbic acid (AA) based on the inner filter effect (IFE). The limit of detection towards Cr(VI) and AA can reach 0.024 and 0.18 μM with linear range of 0.5-225 and 1-300 μM, respectively, which compares favorably to other reported fluorescent probes. In addition, the employment of fluorescent CMC-SQDs for practical detection of Cr(VI) and AA was also studied.

A Critical Review on the Synthesis and Application of Ion-Imprinted Polymers for Selective Preconcentration, Speciation, Removal and Determination of Trace and Essential Metals from Different Matrices

The presence of toxic trace metals and high concentrations of essential elements in the environment presents a serious threat to living organism. Various methods have been used for the detection, preconcentration and remediation of these metals from biological, environmental and food matrices. Owing to the complexicity of samples, methods with high selectivity have been used for detection, preconcentration and remediation of these trace metals. These methods are achieved by the use of ion-imprinted polymers (IIPs) due to their impressive properties such as selectivity, high extraction efficiency, speciation capability and reusability. Because of the increase of toxic trace and essential metals in the environment, IIPs have attracted great use in analytical chemistry. This review, provide a brief background on IIPs and polymerization method that are used for their preparation. Recent applications of IIPs as adsorbents for preconcentration, removal, speciation and electrochemical detection of trace and essential metal is also discussed.

A Novel Electrochemical Sensor Based on Electropolymerized Ion Imprinted PoPD/ERGO Composite for Trace Cd(II) Determination in Water

A novel electrochemical sensor based on electropolymerized ion imprinted poly (o-phenylenediamine) PoPD/electrochemical reduced graphene (ERGO) composite on glass carbon electrode (GCE) was fabricated for selective and sensitive determination of trace Cd(II) in water. ERGO was first deposited on the surface of GCE by electrochemical cyclic voltammetry (CV) scanning to enhance the electron transport activity at electrode surface. The ion imprinted polymer (IIP) of imprinted PoPD was then in situ electropolymerized on ERGO via CV scanning with oPD as functional monomer and Cd(II) ions as template, following removal of the template using electrochemical peroxidation method. The obtained imprinted PoPD/RERGO composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray energy spectroscopy (EDS) for the observation of their morphologies and components. The electrochemical behavior of the imprinted PoPD/ERGO/GCE was performed by CV and SWASV. The fabricated sensor of the imprinted PoPD/ERGO/GCE showed a good selectivity toward target Cd(II) ions in the presence of other heavy metal ions. Under the optimized experimental conditions, the sensor exhibited a good linear relationship between SWASV stripping peak values and Cd(II) concentration in the range of 1 to 50 ng/mL, with the limit of detection as 0.13 ng/mL (S/N = 3). The proposed electrochemical sensor of imprinted PoPD/ERGO/GCE was successfully applied for trace Cd(II) determination in real water samples.

Preparation of highly efficient ion-imprinted polymers with Fe3O4 nanoparticles as carrier for removal of Cr(VI) from aqueous solution

Fe₃O₄ magnetic nanoparticles were prepared by hydrothermal synthesis and their surface was modified by the sol-gel method. Polymers imprinted with magnetic Cr (VI) were prepared by using Cr₂O₇^2- as template ion, 4-vinyl pyridine (4-VP) as monomer, isopropanol as solvent and Fe₃O₄ as matrix. The effects of solvent type, amount of Cr (VI) addition and volume of crosslinking agent on the adsorption properties of the imprinted polymers were investigated. The polymers were characterized by Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). The adsorption equilibrium was reached within 50 min, and the maximum adsorption capacity was 201.55 mg·g^-1. The adsorption process conformed to the Langmuir model, and the results of kinetic fitting showed that the pseudo-first-order kinetic model applied. In the Cr₂O₇^2-/AlF₄^- and Cr₂O₇^2-/CrO₄^2- competitive systems, the imprinted polymer showed good selectivity to the template ions, with relative selectivity factors of 6.91 and 5.99, respectively. When the imprinted polymer was reused 6 times, the adsorption capacity decreased by only 8.2%, demonstrating good reusability.

Synthesis of imprinted chitosan/AuNPs/graphene-coated MWCNTs/Nafion film for detection of lead ions

An ultrasensitive electrochemical platform based on ion-imprinted nanocomposites for monitoring Pb²⁺ was proposed for environmental protection and food safety applications.

Ion-Imprinted Polypropylene Fibers Fabricated by the Plasma-Mediated Grafting Strategy for Efficient and Selective Adsorption of Cr(VI)

To improve the adsorption selectivity towards hexavalent chromium anion (Cr(VI)), surface Cr(VI)-imprinted polypropylene (PP) fibers were fabricated by the plasma-mediated grafting strategy. Hence, a non-thermal Rradio frequency discharge plasma irradiation followed by a gaseous phase grafting was used to load acrylic acid (AA) onto PP fibers, which was afterwards amidated with triethylenetetramine and subjected to imprinting with a Cr(VI) template. The plasma irradiation conditions, i.e., gas species, output power, pressure, and time, were optimized and then the influence of grafting time, pressure, and temperature on the grafting degree of AA was investigated. Scanning electron microscopy and Fourier transform infrared spectroscopy were used for the characterization of pristine and modified fibers and to confirm the synthesis success. The hydrophilicity of modified fibers was greatly improved compared with pristine PP fibers. The adsorption thermodynamics and kinetics of Cr(VI) were investigated, as well as the elution efficiency and reusability. The prepared imprinted fibers showed superior adsorption selectivity to Cr(VI) compared with non-imprinted fibers. Finally, the stability of the imprinted fibers against the oxidation ability of Cr(VI) is discussed.

A Simple and Efficient Molecularly Imprinted Electrochemical Sensor for the Selective Determination of Tryptophan

In this paper, a tryptophan (Trp) molecularly imprinted chitosan film was prepared on the surface of an acetylene black paste electrode using chitosan as the functional polymer, Trp as the template molecule and sulfuric acid as the crosslinking agent. The surface morphologies of non-imprinted and imprinted electrodes were characterized by scanning electron microscopy (SEM). The formation of hydrogen bonds between the functional polymer and the template molecule was confirmed by infrared spectroscopy. Some factors affecting the performance of the imprinted electrode such as the concentration of chitosan, the mass ratio of chitosan to Trp, the dropping amount of the chitosan-Trp mixture, the solution pH, and the accumulation potential and time were discussed. The experimental results show that the imprinted electrode exhibit good affinity and selectivity for Trp. The dynamic linear ranges of 0.01–4 μM, 4–20 μM and 20–100 μM were obtained by second derivative linear sweep voltammetry, and the detection limit was calculated to be 8.0 nM. The use of the imprinted electrode provides an effective method for eliminating the interference of potentially interfering substances. In addition, the sensor has high sensitivity, reproducibility and stability, and can be used for the determination of Trp in pharmaceutical preparations and human serum samples.