Mechanically robust and flexible silk protein/polysaccharide composite sponges for wound dressing

Bioactivation of Konjac Glucomannan Films by Tannic Acid and Gluconolactone Addition

Wound healing is a dynamic process that requires an optimal extracellular environment, as well as an accurate synchronization between various cell types. Over the past few years, great efforts have been devoted to developing novel approaches for treating and managing burn injuries, sepsis, and chronic or accidental skin injuries. Multifunctional smart-polymer-based dressings represent a promising approach to support natural healing and address several problems plaguing partially healed injuries, including severe inflammation, scarring, and wound infection. Naturally derived compounds offer unique advantages such as minimal toxicity, cost-effectiveness, and outstanding biocompatibility along with potential anti-inflammatory and antimicrobial activity. Herein, the main driving idea of the work was the design and development of konjac glucomannan d-glucono-1,5-lactone (KG) films bioactivated by tannic acid and d-glucono-1,5-lactone (GL) addition. Our analysis, using attenuated total reflectance-Fourier transform infrared, atomic force microscopy, and surface energy measurements demonstrated that tannic acid (TA) clearly interacted with the KG matrix, acting as its cross-linker, whereas GL was embedded within the polymer structure. All developed films maintained a moist environment, which represents a pivotal property for wound dressing. Hemocompatibility experiments showed that all tested films exhibited no hemolytic impact on human erythrocytes. Moreover, the presence of TA and GL enhanced the metabolic and energetic activity in human dermal fibroblasts, as indicated by the MTT assay, showing results exceeding 150%. Finally, all films demonstrated high antibacterial properties as they significantly reduced the multiplication rate of both Staphylococcus aureus and Escherichia coli in bacterial broth and created the inhibition zones for S. aureus in agar plates. These remarkable outcomes make the KG/TA/GL film promising candidates for wound healing applications.

Enhancing the porosity of chitosan sponges with CBD by adding antimicrobial violacein

Given the growing interest in non-toxic materials with good anti-inflammatory and antimicrobial mechanical properties, this work focuses on preparing chitosan sponges with violacein and cannabis oil crosslinked with dialdehyde chitosan. The sponge was tested for its physicochemical and biological properties, presenting a high swelling rate, good thermal stability, and satisfactory mechanical properties. The obtained sponge's water vapor transmission rate was 2101 g/m2/day and is within the recommended values for ideal wound dressings. Notably, adding violacein favorably affected the material's porosity, which is essential for dressing materials. In addition, studies have shown that the designed material interacts with human serum albumin and exhibits good antioxidant and anti-inflammatory properties. The antibacterial properties of the prepared biomaterial were assessed using the Microtox test against A. fisherii (Gram-negative bacterium) and S. aureus (Gram-positive bacterium). The investigated material provides potential therapeutic benefits due to the synergistic action of chitosan, violacein, and cannabis oil so that it could be used as a dressing material. The natural origin of the substances could provide an attractive and sustainable alternative to traditional commercially available dressings.

Konjac glucomannan-fibrin composite hydrogel as a model for ideal scaffolds for cell-culture meat

In this study, composite gel was prepared from konjac glucomannan (KGM) and fibrin (FN). Composite gels with different concentration ratios were compared in terms of their mechanical properties, rheological properties, water retention, degradation rate, microstructure and biocompatibility. The results showed that the composite gels had better gel strength and other properties than non-composite gels. In particular, composite hydrogels with low Young's modulus formed when the KGM concentration was 0.8% and the FN concentration was 1.2%. The two components were cross linked through hydrogen-bond interaction, which formed a more stable gel structure with excellent water retention and in-vitro degradation rates, which were conducive to myogenic differentiation of ectomesenchymal stem cells (EMSCs). KGM-FN composite gel was applied to the preparation of cell-culture meat, which had similar texture properties and main nutrients to animal meat as well as higher content of dry base protein and dry base carbohydrate.

Mild preparation of hyaluronic acid/silk fibroin sponges by modified crosslinking method

The composites composed of hyaluronic acid (HA) and silk fibroin (SF) exhibit great potential in diverse biomedical applications. However, the utilization of commercial crosslinkers such as 1,4-butanediol diglycidyl ether (BDDE) for crosslinking HA typically necessitates harsh conditions involving strong alkaline, which greatly limits its potential applications. In this study, a mild modified approach was developed to fabricate HA/SF blend sponges crosslinked by BDDE without alkaline conditions. The blend solutions were cryo-concentrated to induce crosslinking reactions. The mechanism of freezing crosslinking was elucidated by investigating the effects of ice crystal growth and HA molecular weight on the degree of crosslinking. The results revealed that HA achieved efficient crosslinking when its molecular weight exceeds 1000 kDa and freezing temperatures ranged from -40 °C to -20 °C. After introducing SF, multiple crosslinks were formed between SF and HA chains, producing water-stable porous sponges. The SEM results demonstrated that the introduction of SF effectively enhanced the interconnectivity between macropores through creating subordinate holes onto the pores wall. Raising the SF content significantly enhanced compression strength, resistance to enzymatic degradation and cell viability of blend sponges. This study provides a novel strategy for designing bioactive HA/SF blend sponges as substitutes for tissue repair and wound dressing.

Recent advances in harnessing biological macromolecules for wound management: A review

Wound dressings (WDs) are an essential component of wound management and serve as an artificial barrier to isolate the injured site from the external environment, thereby helping to prevent exogenous infections and supporting healing. However, maintaining a moist wound environment, providing protection from infection, good biocompatibility, and allowing for gas exchange, remain a challenge in device design. Functional wound dressings (FWDs) prepared from hybrid biological macromolecule-based materials can enhance efficacy of these systems for skin wound management. This review aims to provide an overview of the state-of-the-art FWDs within the field of wound management, with a specific focus on hybrid biomaterials, techniques, and applications developed over the past five years. In addition, we highlight the incorporation of biological macromolecules in WDs, the emergence of smart WDs, and discuss the existing challenges and future prospects for the development of advanced WDs.

Precise healing of oral and maxillofacial wounds: tissue engineering strategies and their associated mechanisms

Precise healing of wounds in the oral and maxillofacial regions is usually achieved by targeting the entire healing process. The rich blood circulation in the oral and maxillofacial regions promotes the rapid healing of wounds through the action of various growth factors. Correspondingly, their tissue engineering can aid in preventing wound infections, accelerate angiogenesis, and enhance the proliferation and migration of tissue cells during wound healing. Recent years, have witnessed an increase in the number of researchers focusing on tissue engineering, particularly for precise wound healing. In this context, hydrogels, which possess a soft viscoelastic nature and demonstrate exceptional biocompatibility and biodegradability, have emerged as the current research hotspot. Additionally, nanofibers, films, and foam sponges have been explored as some of the most viable materials for wound healing, with noted advantages and drawbacks. Accordingly, future research is highly likely to explore the application of these materials harboring enhanced mechanical properties, reduced susceptibility to external mechanical disturbances, and commendable water absorption and non-expansion attributes, for superior wound healing.

Soft and flexible polyvinyl alcohol/pullulan aerogels with fast and high water absorption capacity for facial mask substrates

Facial mask substrates commonly used in skincare are often considered unhealthy and environmentally unfriendly due to their composition of premoistened nonwovens containing various preservatives. This study aims to address this issue by developing a preservative-free degradable aerogel made from polyvinyl alcohol (PVA)/pullulan (PUL) using a unidirectional freeze-drying method. The aerogels had ordered three-dimensional porous structures and exhibited desirable mechanical properties. They were soft and flexible in both dry and wet states, and their Young's moduli were comparable to that of human skin. The aerogels had high porosity, ranging from 93.0 % to 95.1 %, and exhibited a high water absorption rate and water absorption capacity (ranging from 7.5 g/g to 10.1 g/g). After 30 min of water evaporation, the aerogels showed excellent moisture retention, ranging from 88 % to 93 %. Additionally, the PVA/PUL aerogel efficiently loaded and released active ingredients, such as rapidly releasing ascorbic acid (> 90 % within 30 min). These findings suggest that the PVA/PUL aerogel has potential as a material for facial mask substrates.

Advanced function, design and application of skin substitutes for skin regeneration

The development of skin substitutes aims to replace, mimic, or improve the functions of human skin, regenerate damaged skin tissue, and replace or enhance skin function. This includes artificial skin, scaffolds or devices designed for treatment, imitation, or improvement of skin function in wounds and injuries. Therefore, tremendous efforts have been made to develop functional skin substitutes. However, there is still few reports systematically discuss the relationship between the advanced function and design requirements. In this paper, we review the classification, functions, and design requirements of artificial skin or skin substitutes. Different manufacturing strategies for skin substitutes such as hydrogels, 3D/4D printing, electrospinning, microfluidics are summarized. This review also introduces currently available skin substitutes in clinical trials and on the market and the related regulatory requirements. Finally, the prospects and challenges of skin substitutes in the field of tissue engineering are discussed.

Biocompatible and biodegradable Bletilla striata polysaccharides hydrogels crosslinked by BDDE for wound healing through the regulating of macrophage polarization

Bletilla striata polysaccharide (BSP) is a naturally occurring polysaccharide that demonstrates notable biocompatibility and biodegradability. Additionally, BSP possesses therapeutic attributes, including anti-inflammatory and reparative actions. Herein, we report a novel BSP hydrogel prepared using 1,4-butanediol diglycidyl ether (BDDE) as a cross-linking agent. The hydrogel was synthesized via condensation of the hydroxyl group in the BSP molecule with the epoxy group in BDDE. This technique of preparation preserves BSP's natural properties while avoiding any potentially hazardous or adverse effects that may occur during the chemical alteration. Compared with BSP before crosslinking, BSP hydrogel has distinct advantages, such as a three-dimensional network structure, improved water retention, enhanced swelling capacity, greater thermal stability, and superior mechanical properties. Experiments on in vitro cytotoxicity, hemolysis, and degradation revealed that BSP hydrogel had good biocompatibility and biodegradability. Finally, we evaluated the in vivo wound repair effect of BSP hydrogel, and the results showed that BSP hydrogel had a significant wound-healing effect. Furthermore, the BSP hydrogel promoted the polarization of M1-type macrophages towards the M2-type and reduced the inflammatory response during the wound healing phase. Because of its ease of production, safety, efficacy, and environmental friendliness, BSP hydrogel is considered a highly promising material for wound dressings.

Double network hydrogels: Design, fabrication, and application in biomedicines and foods

Research on the design, fabrication, and application of double network (DN) hydrogels, assembled from pairs of polymers, has grown recently due to their unique structural, physicochemical, and functional properties. DN hydrogels can be designed to exhibit a broader range of functional attributes than single network (SN) ones, which extends their applications in various fields. There has been strong interest in the development of biopolymer DN hydrogels because of their environmental, sustainability, and safety benefits. However, there is limited knowledge on the formation and application of these novel materials. This article reviews the principles underlying the design and fabrication of hydrogels using different crosslinking approaches, including covalent and/or non-covalent bonding, and the formation mechanisms, network structures, and functional attributes of different DN hydrogels. The impact of polymer composition, structural organization, and bonding on the mechanical and functional properties of DN hydrogels is reviewed. Potential applications of these hydrogels are highlighted, including in tissue engineering, biomedicines, and foods. The functional attributes of DN hydrogels can be tailored to each of these applications by careful selection of the biopolymers and crosslinking mechanisms used to assemble them. Finally, areas where further research are needed to overcome the current limitations of DN hydrogels are highlighted.

Advanced polymer hydrogels that promote diabetic ulcer healing: mechanisms, classifications, and medical applications

Diabetic ulcers (DUs) are one of the most serious complications of diabetes mellitus. The application of a functional dressing is a crucial step in DU treatment and is associated with the patient's recovery and prognosis. However, traditional dressings with a simple structure and a single function cannot meet clinical requirements. Therefore, researchers have turned their attention to advanced polymer dressings and hydrogels to solve the therapeutic bottleneck of DU treatment. Hydrogels are a class of gels with a three-dimensional network structure that have good moisturizing properties and permeability and promote autolytic debridement and material exchange. Moreover, hydrogels mimic the natural environment of the extracellular matrix, providing suitable surroundings for cell proliferation. Thus, hydrogels with different mechanical strengths and biological properties have been extensively explored as DU dressing platforms. In this review, we define different types of hydrogels and elaborate the mechanisms by which they repair DUs. Moreover, we summarize the pathological process of DUs and review various additives used for their treatment. Finally, we examine the limitations and obstacles that exist in the development of the clinically relevant applications of these appealing technologies. This review defines different types of hydrogels and carefully elaborate the mechanisms by which they repair diabetic ulcers (DUs), summarizes the pathological process of DUs, and reviews various bioactivators used for their treatment.

Review of Konjac Glucomannan Structure, Properties, Gelation Mechanism, and Application in Medical Biology

Konjac glucomannan (KGM) is a naturally occurring macromolecular polysaccharide that exhibits remarkable film-forming and gel-forming properties, and a high degree of biocompatibility and biodegradability. The helical structure of KGM is maintained by the acetyl group, which plays a crucial role in preserving its structural integrity. Various degradation methods, including the topological structure, can enhance the stability of KGM and improve its biological activity. Recent research has focused on modifying KGM to enhance its properties, utilizing multi-scale simulation, mechanical experiments, and biosensor research. This review presents a comprehensive overview of the structure and properties of KGM, recent advancements in non-alkali thermally irreversible gel research, and its applications in biomedical materials and related areas of research. Additionally, this review outlines prospects for future KGM research, providing valuable research ideas for follow-up experiments.

Mussel-Inspired Multifunctional Hydrogels with Adhesive, Self-Healing, Antioxidative, and Antibacterial Activity for Wound Healing

Antibacterial hydrogel wound dressings with adhesive and antioxidant activity are desirable for treating skin injuries in clinical care. Hereby, a series of multifunctional hydrogel wound dressings with high adhesive, self-healing, antioxidant, and antibacterial activity were designed and fabricated using dopamine (DA) and quercetin (QT). The multifunctional hydrogels were constructed by the interpenetrated quaternized chitosan chain segments and polyacrylamide network. The catechol groups on DA, QT, and the quaternary ammonium groups in the hydrogel system endow hydrogels with high strength, excellent adhesion, and self-healing ability. The results confirmed the admirable hemocompatibility and remarkable antibacterial activity of the multifunction hydrogels against Staphylococcus aureus and Escherichia coli. Consequently, multifunction hydrogels with satisfactory adhesive and antibacterial activity are appropriate alternative materials in the fields of tissue adhesive and wound dressing applications.

Construction of porous structure-based carboxymethyl chitosan/ sodium alginate/ tea polyphenols for wound dressing

Polysaccharide-based materials with porous structure were selected as the basic skeleton to prepare a flexible and biodegradable wound dressing. The carboxymethyl chitosan/sodium alginate/tea polyphenols (CC/SA/TP) with a two-layer porous structure exhibits a variety of performances. The specific combined structure with ordered and lamellar porous structure was constructed by high-speed homogenized foaming, Ca²⁺ crosslinking and two-step freeze-drying methods. Moreover, the CC/SA/TP porous structure owns better shape retention and recovery because of the 3D network with an "egg-box" structure formed by impregnation. Tea polyphenols are efficiently encapsulated into a porous structure and released in a sustained pattern. After storing for 60 days, the CC/SA/TP porous structure still exhibits great suitable water vapor transmittance, efficient antibacterial activity and ultrarapid antioxidant activity. Meanwhile, the relatively low differential blood clotting index (BCI) and cytotoxicity of the CC/SA/TP porous structure indicate that it possesses the possibility of adjusting and controlling wound bleeding. The test results reveal that the CC/SA/TP porous structure might be expected to play a great potential role in biomedical applications of wound dressing.

pH-Responsive wound dressings: advances and prospects

Wound healing is a complex and dynamic process, in which the pH value plays an important role in reflecting the wound status. Wound dressings are materials that are able to accelerate the healing process. Among the multifunctional advanced wound dressings developed in recent years, pH-responsive wound dressings, especially hydrogels, show great potential owing to their unique properties of adjusting their functions according to the wound conditions, thereby allowing the wound to heal in a regulated manner. However, a comprehensive review of pH-responsive wound dressings is lacking. This review summarizes the design strategies and advanced functions of pH-responsive hydrogel wound dressings, including their excellent antibacterial properties and significant pro-healing abilities. Other advanced pH-responsive materials, such as nanofibers, composite films, nanoparticle clusters, and microneedles, are also classified and discussed. Next, the pH-monitoring functions of pH-responsive wound dressings and the related pH indicators are summarized in detail. Finally, the achievements, challenges, and future development trends of pH-responsive wound dressings are discussed.

Glycoproteins as a Platform for Making Proton-Conductive Free-Standing Biopolymers

Biopolymers are an attractive environmentally friendly alternative to common synthetic polymers, whereas primarily proteins and polysaccharides are the biomacromolecules that are used for making the biopolymer. Due to the breadth of side chains of such biomacromolecules capable of participating in hydrogen bonding, proteins and polysaccharide biopolymers were also used for the making of proton-conductive biopolymers. Here, we introduce a new platform for combining the merits of both proteins and polysaccharides while using a glycosylated protein for making the biopolymer. We use mucin as our starting point, whereas being a waste of the food industry, it is a highly available and low-cost glycoprotein. We show how we can use different chemical strategies to target either the glycan part or specific amino acids for both crosslinking between the different glycoproteins, thus making a free-standing biopolymer, as well as for introducing superior proton conductivity properties to the formed biopolymer. The resultant proton-conductive soft biopolymer is an appealing candidate for any soft bioelectronic application.

Natural silk nanofibers as building blocks for biomimetic aerogel scaffolds

Protein nanofibers offer great promise for tissue engineering scaffolds owing to biomimetic architecture and exceptional biocompatibility. Natural silk nanofibrils (SNFs) are promising but unexplored protein nanofibers for biomedical applications. In this study, the SNF-assembled aerogel scaffolds with ECM-mimicking architecture and ultra-high porosity are developed based on a polysaccharides-assisted strategy. The SNFs exfoliated from silkworm silks can be utilized as building blocks to construct 3D nanofibrous scaffolds with tunable densities and desirable shapes on a large scale. We demonstrate that the natural polysaccharides can regulate SNF assembly through multiple binding modes, endowing the scaffolds with structural stability in water and tunable mechanical properties. As a proof of concept, the biocompatibility and biofunctionality of the chitosan-assembled SNF aerogels were investigated. The nanofibrous aerogels have excellent biocompatibility, and their biomimetic structure, ultra-high porosity, and large specific surface area endow the scaffolds with enhanced cell viability to mesenchymal stem cells. The nanofibrous aerogels were further functionalized by SNF-mediated biomineralization, demonstrating their potential as a bone-mimicking scaffold. Our results show the potential of natural nanostructured silks in the field of biomaterials and provide a feasible strategy to construct protein nanofiber scaffolds.

Nanomaterials-Functionalized Hydrogels for the Treatment of Cutaneous Wounds

Hydrogels have been utilized extensively in the field of cutaneous wound treatment. The introduction of nanomaterials (NMs), which are a big category of materials with diverse functionalities, can endow the hydrogels with additional and multiple functions to meet the demand for a comprehensive performance in wound dressings. Therefore, NMs-functionalized hydrogels (NMFHs) as wound dressings have drawn intensive attention recently. Herein, an overview of reports about NMFHs for the treatment of cutaneous wounds in the past five years is provided. Firstly, fabrication strategies, which are mainly divided into physical embedding and chemical synthesis of the NMFHs, are summarized and illustrated. Then, functions of the NMFHs brought by the NMs are reviewed, including hemostasis, antimicrobial activity, conductivity, regulation of reactive oxygen species (ROS) level, and stimulus responsiveness (pH responsiveness, photo-responsiveness, and magnetic responsiveness). Finally, current challenges and future perspectives in this field are discussed with the hope of inspiring additional ideas.

Advances in Hemostatic Hydrogels That Can Adhere to Wet Surfaces

Currently, uncontrolled bleeding remains a serious problem in emergency, surgical and battlefield environments. Despite the specific properties of available hemostatic agents, sealants, and adhesives, effective hemostasis under wet and dynamic conditions remains a challenge. In recent years, polymeric hydrogels with excellent hemostatic properties have received much attention because of their adjustable mechanical properties, high porosity, and biocompatibility. In this review, to investigate the role of hydrogels in hemostasis, the mechanisms of hydrogel hemostasis and adhesion are firstly elucidated, the adhesion design strategies of hemostatic hydrogels in wet environments are briefly introduced, and then, based on a comprehensive literature review, the studies and in vivo applications of wet-adhesive hemostatic hydrogels in different environments are summarized, and the improvement directions of such hydrogels in future studies are proposed.

Self-Pumping Janus Hydrogel with Aligned Channels for Accelerating Diabetic Wound Healing

Excessive exudate secreted from diabetic wounds often results in skin overhydration, severe infections, and secondary damage upon dressing changes. However, conventional wound dressings are difficult to synchronously realize the non-maceration of wound sites and rapid exudate transport due to their random porous structure. Herein, a self-pumping Janus hydrogel with aligned channels (JHA) composed of hydrophilic poly (ethylene glycol) diacrylate (PEGDA) hydrogel layer and hydrophobic polyurethane (PU)/graphene oxide (GO)/polytetrafluoroethylene (PTFE) layer is designed to rapidly export exudate and accelerate diabetic wound healing. In the design, the ice-templating process endows the hydrophilic hydrogel layer with superior liquid transport ability and mechanical strength due to the formation of aligned channel structure. The hydrophobic layer with controlled thickness functions as an effective barrier to prevent exudate from wetting the skin surface. Experiments in diabetic rat model show that JHA can significantly promote re-epithelialization and collagen deposition, shorten the inflammation phase, and accelerate wound healing. This unique JHA dressing may have great potential for real-life usage in clinical patients.

Aramid Nanofibers-Reinforced Rhein Fibrous Hydrogels as Antibacterial and Anti-Inflammatory Burn Wound Dressings

Burn injuries are one of the most devastating traumas. The development of polymer-based hydrogel dressings to prevent bacterial infection and accelerate burn wound healing is continuously desired. Mechanical strong hydrogels that encapsulated antibacterial drugs have gained increasing attention. Herein, aramid nanofibers (ANFs)-reinforced rhein fibrous hydrogels (ANFs/Rhein) were fabricated through a one-pot procedure to serve as a possible treatment for the Staphylococcus aureus-infected burn wound. ANFs preserved the highly aligned backbones and the mechanical properties of Kevlar, and its combination with an antibacterial drug rhein produced a composite hydrogel that possesses favorable physicochemical properties including appropriate mechanical strength, high water holding capacity, satisfactory antibacterial efficiency, and excellent biocompatibility. As wound dressings, ANFs/Rhein hydrogels provided a moist environment for the wound site and released antibacterial drugs continuously to improve the wound healing rate by efficiently restraining bacterial infection, reducing inflammation, enhancing collagen deposition, and promoting the formation of blood vessels, in this way to offer a potential treatment strategy for bacteria-associated burn wound healing.

Secretory Fluid-Aggregated Janus Electrospun Short Fiber Scaffold for Wound Healing

Exudate management is critical to improve chronic wound healing. Herein, inspired by a Janus-structured lotus leaf with asymmetric wettability, a Janus electrospun short fiber scaffold is fabricated via electrospinning technologies and short fiber modeling. This scaffold is composed of hydrophilic 2D curcumin-loaded electrospun fiber and hydrophobic 3D short fiber via layer-by-layer assembly and electrostatic interactions which can aggregate the wound exudate by pumping from the hydrophobic layer to the hydrophilic via multiple contact points between hydrophilic and hydrophobic fibers, and simultaneously trigger the cascade release of curcumin in the upper 2D electrospun fiber. The 3D short fiber with high porosity and hydrophobicity can quickly aggregate exudate within 30 s after compounding with hydrophilic 2D electrospun fiber via a spontaneous pump. In vitro experiments show that Janus electrospun short fiber has good biocompatibility, and the cascade release of curcumin can significantly promote the proliferation and migration of fibroblasts. In vivo experiments show that it can trigger cascade release of curcumin by aggregating wound exudate, so as to accelerate wound healing process and promote collagen deposition and vascularization. Hence, this unique biometric Janus scaffold provides an alternative for chronic wound healing.

Rapid In Situ Deposition of Iron-Chelated Polydopamine Coating on the Polyacrylamide Hydrogel Dressings for Combined Photothermal and Chemodynamic Therapy of Skin Wound Infection

Pathogenic bacterial infections of skin wounds have caused a significant threat to clinical treatment and human life safety. Here, we develop a bactericidal hydrogel dressing consisting of a polyacrylamide (PAM) hydrogel framework with in situ surface-deposition of iron-dopped polydopamine (FePDA). The prepared hydrogel dressing (FePDA-PAM) has a compact surface, good tensile strength, and excellent elastic recovery ability. The introduction of Fe3+ ions improve the photothermal therapy (PTT) efficiency of the PDA and endow the hydrogel dressing with chemodynamic therapy (CDT) properties. In vitro experiments show that the antibacterial effect of FePDA-PAM hydrogel on Staphylococcus aureus reach nearly 100% under the combined action of H2O2 and 808 nm near-infrared (NIR) laser, indicating an excellent combined antibacterial property of PTT and CDT. Furthermore, the FePDA-PAM + H2O2 + NIR treatment group in the in vivo antibacterial experiments displays lowest relative wound area and optimal wound healing within 5 days of treatment, thereby indicating the intensive skin wound disinfection. To summarize, the FePDA-PAM hydrogel has simple preparation and good biosafety. It may serve as a potential wound dressing for the combined PTT/CDT dual-mode antibacterial therapy.

Co-Loading of Inorganic Nanoparticles and Natural Oil in the Electrospun Janus Nanofibers for a Synergetic Antibacterial Effect

Side-by-side electrospinning is a powerful but challenging technology that can be used to prepare Janus nanofibers for various applications. In this work, cellulose acetate (CA) and polycaprolactone (PCL) were used as polymer carriers for silver nanoparticles (Ag NPs) and lavender oil (LO), respectively, processing these into two-compartment Janus fibers. A bespoke spinneret was used to facilitate the process and prevent the separation of the working fluids. The process of side-by-side electrospinning was recorded with a digital camera, and the morphology and internal structure of the products were characterized by electron microscopy. Clear two-compartment fibers are seen. X-ray diffraction patterns demonstrate silver nanoparticles have been successfully loaded on the CA side, and infrared spectroscopy indicates LO is dispersed on the PCL side. Wetting ability and antibacterial properties of the fibers suggested that PCL-LO//CA-Ag NPs formulation had strong antibacterial activity, performing better than fibers containing only one active component. The PCL-LO//CA-Ag NPs had a 20.08 ± 0.63 mm inhibition zone for E. coli and 19.75 ± 0.96 mm for S. aureus. All the fibers had water contact angels all around 120°, and hence, have suitable hydrophobicity to prevent water ingress into a wound site. Overall, the materials prepared in this work have considerable promise for wound healing applications.

Smart Polycationic Hydrogel Dressing for Dynamic Wound Healing

It is challenging for traditional wound dressings to adapt to the complex and changeable environment, due to the lack of stable, efficient, and continuous bactericidal activity. They also cannot be satisfied in a multifunctional sensing platform to reconstruct skin sensory functions for human health monitoring. A multifunctional hydrogel dressing is developed here for the treatment of infected wounds and human health monitoring, which is based on alginate and polycation. The in situ polymerization and solvent displacement method are used to functionalize the hydrogel for the improvement of antifreezing, water retention, and environmental adaptability, as well as the adhesion and photothermal property. As a wound dressing, the as-prepared hydrogel exhibits an excellent antibacterial property against both Escherichia coli and Staphylococcus aureus. In a rat model of full-thickness wound infection, it significantly accelerates the healing of infected wounds with a high healing rate of 96.49%. In the further multifunctional sensory tests, the hydrogel shows multiple response modes of strain, pressure and temperature, and sensing stability. An idea is provided here to develop a smart hydrogel dressing that can accelerate wound healing and achieve human health monitoring.

Allantoin-functionalized silk fibroin/sodium alginate transparent scaffold for cutaneous wound healing

In clinical application, it's highly desirable for developing bio-functionalized cutaneous scaffold with transparent features for convenient observation, excellent biocompatibility, and high efficiency for promoting wound repair. Herein, allantoin-functionalized composite hydrogel was developed by coupling silk fibroin (SF) and sodium alginate (SA) for treatment of cutaneous wounds. The prepared allantoin-functionalized SF-SA composite scaffolds (AFAS) exhibited excellent mechanical properties, especially featured by similar ultimate tensile strength (UTS) and elongation at breaking to human skin. Besides, the solvent-casting method guaranteed the AFAS to obtain highly transparent properties with sufficient moisture permeability and excellent adhesion in wet state. In vitro cellular experiments demonstrated excellent biocompatibility of the scaffold that attachment and proliferation of NIH-3T3 fibroblast cells was promoted in the presence of AFAS. Furthermore, the scaffolds exhibited efficient hemostatic property, based on rat hepatic hemorrhage model. In a cutaneous excisional mouse wound model, the AFAS significantly improved the wound closure rate, compared with pure SF-SA scaffolds and blank control. Moreover, the histomorphological assessments showed that AFAS facilitated the integrity of skin and wound healing process by enhancing collagen deposition, re-epithelialization and vascularization at wound site. The results demonstrate that the novel allantoin-functionalized SF/SA transparent hydrogel has great potential for clinical treatment of cutaneous wound.

Antibacterial biomaterials for skin wound dressing

Bacterial infection and the ever-increasing bacterial resistance have imposed severe threat to human health. And bacterial contamination could significantly menace the wound healing process. Considering the sophisticated wound healing process, novel strategies for skin tissue engineering are focused on the integration of bioactive ingredients, antibacterial agents included, into biomaterials with different morphologies to improve cell behaviors and promote wound healing. However, a comprehensive review on anti-bacterial wound dressing to enhance wound healing has not been reported. In this review, various antibacterial biomaterials as wound dressings will be discussed. Different kinds of antibacterial agents, including antibiotics, nanoparticles (metal and metallic oxides, light-induced antibacterial agents), cationic organic agents, and others, and their recent advances are summarized. Biomaterial selection and fabrication of biomaterials with different structures and forms, including films, hydrogel, electrospun nanofibers, sponge, foam and three-dimension (3D) printed scaffold for skin regeneration, are elaborated discussed. Current challenges and the future perspectives are presented in this multidisciplinary field. We envision that this review will provide a general insight to the elegant design and further refinement of wound dressing.

Polymer-Based Wound Dressing Materials Loaded with Bioactive Agents: Potential Materials for the Treatment of Diabetic Wounds

Diabetic wounds are severe injuries that are common in patients that suffer from diabetes. Most of the presently employed wound dressing scaffolds are inappropriate for treating diabetic wounds. Improper treatment of diabetic wounds usually results in amputations. The shortcomings that are related to the currently used wound dressings include poor antimicrobial properties, inability to provide moisture, weak mechanical features, poor biodegradability, and biocompatibility, etc. To overcome the poor mechanical properties, polymer-based wound dressings have been designed from the combination of biopolymers (natural polymers) (e.g., chitosan, alginate, cellulose, chitin, gelatin, etc.) and synthetic polymers (e.g., poly (vinyl alcohol), poly (lactic-co-glycolic acid), polylactide, poly-glycolic acid, polyurethanes, etc.) to produce effective hybrid scaffolds for wound management. The loading of bioactive agents or drugs into polymer-based wound dressings can result in improved therapeutic outcomes such as good antibacterial or antioxidant activity when used in the treatment of diabetic wounds. Based on the outstanding performance of polymer-based wound dressings on diabetic wounds in the pre-clinical experiments, the in vivo and in vitro therapeutic results of the wound dressing materials on the diabetic wound are hereby reviewed.

Skin-permissible NIR-actuated hyperthermia using a photothermally responsive hydrogel membrane for the effective treatment of antibiotic-resistant bacterial infection

With the long-term widespread overuse of antibiotics, a large number of antibiotic-resistant bacteria have emerged and become a serious threat to healthcare systems. As an alternative strategy, near-infrared light (NIR)-actuated photothermal treatment has been developed for killing antibiotic-resistant bacteria. Although promising, the widespread applications of photothermal antibacterial platforms face great challenges due to the skin-harmful high laser irradiation. In this work, a novel NIR-responsive hydrogel membrane for effective photothermal sterilization upon light irradiation at skin-permissible intensity has been successfully prepared using a sodium alginate-based hydrogel membrane containing tannic acid-Fe(III) compounds (STF). The as-prepared STF displayed excellent mechanical capacity and fabricability. More importantly, the as-prepared STF revealed superior photothermal efficiency under a low-intensity NIR irradiation (0.3 W cm^-2), which was below the maximum permissible exposure of skin (0.33 W cm^-2). In addition, the STF showed the excellent performance of photothermal sterilization for MRSA both in vitro and in vivo. Furthermore, the STF showed good biocompatibility. Based on the simple synthesis method, outstanding mechanical properties, excellent photothermal sterilization performance and good biocompatibility, the STF could be a promising wound dressing for antibiotic-resistant bacterial infections.

Facile design and development of nano-clustery graphene-based macromolecular protein hydrogel loaded with ciprofloxacin to antibacterial improvement for the treatment of burn wound injury

Nowadays, awareness about the burn wound is often considered difficult due to bacterial and other organism infections. The facile and eco-friendly preparations of antibiotic-loaded hydrogel-based bio-composites have great attention in the field of wound dressing for burn wound therapy and nursing care. In the present investigation, we have developed ciprofloxacin (CF)-encapsulated graphene-silk fibroin macromolecular hydrogel dressings material with unique chemical and physical properties to achieve the desirable antibacterial efficacy and healing activity. The antibacterial activity of prepared hydrogel was evaluated against bacterial pathogens treated with different concentrations of CF, which have been provided improved antibacterial activity on burn wound infection. In vitro, cytocompatibility evaluations were performed to imply the suitability of hydrogel on fibroblast cells, which has been dramatically related to in vivo wound healing. Furthermore, an in vivo wound healing analysis was carried out using a rat to observe the capability of the CF-incorporated GH/SF hydrogel matrix. Thus, this investigation widely demonstrates the healing ability of prepared hydrogel matrix and could be a significant landmark in the research on burn wound healing applications.

Fabrication and characterisation of a wound dressing composed of polyvinyl alcohol and quince seed mucilage

OBJECTIVE

Providing a suitable environment to improve the healing process is the main target of wound dressing that also protects the wound from additional harms. In the present study, fabrication and characterisation of a new kind of electrospun wound dressing composed of polyvinyl alcohol (PVA) and quince seed mucilage (QSM) is reported.

METHOD

QSM was extracted from quince seeds, purified, freeze-dried and used to produce aqueous solutions containing different amounts of PVA and QSM. The wound dressings were fabricated via the electrospinning method and their characteristics were investigated with scanning electron microscope (SEM) images, Fourier transform infrared (FTIR) spectra, tensile and swelling test, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) cytotoxicity assay against fibroblast cells.

RESULTS

SEM images confirmed that proper, uniform, non-oriented nanofibres with an average diameter in the range of 60-240nm, depending on the QSM content had been fabricated. The tensile test showed that with increasing QSM content, the tensile strength of fibre increased while elongation at break was decreased, which was consistent with SEM images where the diameter of samples decreased by increasing QSM content. MTT assay showed significant biocompatibility against fibroblast cells; however, it was increased by increased QSM proportion. In addition, SEM images supported the proper adhesion of fibroblast cells on the sample one day after culturing.

CONCLUSION

Overall, the findings of the current study support the potential of PVA/QSM nanofibres as a proper candidate for biomedical applications, especially as a wound dressing.

Gelatin-Based Hybrid Scaffolds: Promising Wound Dressings

Wound care is a major biomedical field that is challenging due to the delayed wound healing process. Some factors are responsible for delayed wound healing such as malnutrition, poor oxygen flow, smoking, diseases (such as diabetes and cancer), microbial infections, etc. The currently used wound dressings suffer from various limitations, including poor antimicrobial activity, etc. Wound dressings that are formulated from biopolymers (e.g., cellulose, chitin, gelatin, chitosan, etc.) demonstrate interesting properties, such as good biocompatibility, non-toxicity, biodegradability, and attractive antimicrobial activity. Although biopolymer-based wound dressings display the aforementioned excellent features, they possess poor mechanical properties. Gelatin, a biopolymer has excellent biocompatibility, hemostatic property, reduced cytotoxicity, low antigenicity, and promotes cellular attachment and growth. However, it suffers from poor mechanical properties and antimicrobial activity. It is crosslinked with other polymers to enhance its mechanical properties. Furthermore, the incorporation of antimicrobial agents into gelatin-based wound dressings enhance their antimicrobial activity in vitro and in vivo. This review is focused on the development of hybrid wound dressings from a combination of gelatin and other polymers with good biological, mechanical, and physicochemical features which are appropriate for ideal wound dressings. Gelatin-based wound dressings are promising scaffolds for the treatment of infected, exuding, and bleeding wounds. This review article reports gelatin-based wound dressings which were developed between 2016 and 2021.

Chitosan/Hyaluronic acid/Alginate and an assorted polymers loaded with honey, plant, and marine compounds for progressive wound healing-Know-how

Biomaterials are being extensively used in regenerative medicine including tissue engineering applications, as these enhance tissue development, repair, and help in the process of angiogenesis. Wound healing is a crucial biological process of regeneration of ruptured tissue after getting injury to the skin and other soft tissue in humans and animals. Besides, the accumulation of microbial biofilms around the wound surface can increase the risk and physically obstruct the wound healing activity, and may even lead to amputation. Hence, in both acute and chronic wounds, prominent biomaterials are required for wound healing along with antimicrobial agents. This review comprehensively addresses the antimicrobial and wound healing effects of chitosan, chitin, cellulose acetate, hyaluronic acid, pullulan, bacterial cellulose, fibrin, alginate, etc. based wound dressing biomaterials fabricated with natural resources such as honey, plant bioactive compounds, and marine-based polymers. Due to their excellent biocompatibility and biodegradability, bioactive compounds derived from honey, plants, and marine resources are commonly used in biomedical and tissue engineering applications. Different types of polymer-based biomaterials including hydrogel, film, scaffold, nanofiber, and sponge dressings fabricated with bioactive agents including honey, curcumin, tannin, quercetin, andrographolide, gelatin, carrageenan, etc., can exhibit significant wound healing process in, diabetic wounds, diabetic ulcers, and burns, and help in cartilage repair along with good biocompatibility and antimicrobial effects. Among the reviewed biomaterials, carbohydrate polymers such as chitosan-based biomaterials are prominent and widely used for wound healing applications followed by hyaluronic acid and alginate-based biomaterials loaded with honey, plant, and marine compounds. This review first provides an overview of the vast natural resources used to formulate different biomaterials for the treatment of antimicrobial, acute, and chronic wound healing processes.

High-throughput fabrication of silk fibroin/hydroxypropyl methylcellulose (SF/HPMC) nanofibrous scaffolds for skin tissue engineering

Silk fibroin (SF) is a natural macromolecule material with good biocompatibility, which can be used to prepare a variety of biological materials. In this study, hydroxypropyl methylcellulose (HPMC) was applied to improve the properties of SF nanofibrous scaffolds (NFS) for skin tissue engineering applications. SF/HPMC NFS with varying weight ratios of SF: HPMC were prepared in batches by a modified free surface electrospinning. The effects of the varying weight ratio of SF: HPMC on the morphology, property and yield of SF/HPMC NFS were investigated. The results revealed that with the increase of HPMC contents, the hydrophilicity of SF/HPMC NFS would be improved, but the yield of that would decrease. Considering its effects on the morphology, property and yield of SF/HPMC NFS, the optimal weight ratio of SF: HPMC was 7:1. And SF/HPMC NFS with the weight ratio of 7:1 (SF/HPMC-7:1 NFS) had good mechanical property, hydrophilicity, porosity, swelling property and water vapor transmission rate (WVTR). In addition, the viability test results of human umbilical vein endothelial cells demonstrated that SF/HPMC-7:1 NFS maintained excellent biocompatibility for cell adhesion and proliferation.

Protein composites from silkworm cocoons as versatile biomaterials

Silk is a naturally occurring biopolymer formed into fibers composed primarily of fibroin and sericin proteins. The outstanding mechanical properties of silk fibroin (SF) provides numerous applications for silk-based biomaterials. However, the canonical approaches for fabricating silk-based biomaterials typically involve degumming to remove the silk sericin (SS) to avoid adverse biological effects. Meanwhile, sericin has multiple biological functions including outstanding hydrophilicity, promoting cell attachment that are useful to exploit in new materials, inspiring the use of sericin-based biomaterials for biomedical applications. However, compared to fibroin, sericin is not a structural protein, thus sericin-based materials do not provide robust mechanical properties. To address this problem, we report an effective method for fabricating silk fibroin-sericin protein (SS-SF) composites directly from whole cocoons, negating the traditional extraction step to remove the sericin. This approach combines the material features from both fibroin as a structural unit and sericin as a biological functional unit, to achieve advantages regarding processing and materials properties, not only simplifying processing and maintaining the mechanical properties of the fibroin by avoiding degumming, but also endowing these SS-SF composite materials with enhanced hydrophilicity and cell adhesion performance to promote cell growth and proliferation. In addition, these protein composites could be fabricated into a variety of materials formats (e.g. films, sponges, monoliths) to fit different biomedical applications.

Polymer-Based Materials Loaded with Curcumin for Wound Healing Applications

Some of the currently used wound dressings have interesting features such as excellent porosity, good water-absorbing capacity, moderate water vapor transmission rate, high drug loading efficiency, and good capability to provide a moist environment, but they are limited in terms of antimicrobial properties. Their inability to protect the wound from microbial invasion results in wound exposure to microbial infections, resulting in a delayed wound healing process. Furthermore, some wound dressings are loaded with synthetic antibiotics that can cause adverse side effects on the patients. Natural-based compounds exhibit unique features such as good biocompatibility, reduced toxicity, etc. Curcumin, one such natural-based compound, has demonstrated several biological activities such as anticancer, antibacterial and antioxidant properties. Its good antibacterial and antioxidant activity make it beneficial for the treatment of wounds. Several researchers have developed different types of polymer-based wound dressings which were loaded with curcumin. These wound dressings displayed excellent features such as good biocompatibility, induction of skin regeneration, accelerated wound healing processes and excellent antioxidant and antibacterial activity. This review will be focused on the in vitro and in vivo therapeutic outcomes of wound dressings loaded with curcumin.

Bioinspired Materials for Wound Healing Application: The Potential of Silk Fibroin

Nature is an incredible source of inspiration for scientific research due to the multiple examples of sophisticated structures and architectures which have evolved for billions of years in different environments. Numerous biomaterials have evolved toward high level functions and performances, which can be exploited for designing novel biomedical devices. Naturally derived biopolymers, in particular, offer a wide range of chances to design appropriate substrates for tissue regeneration and wound healing applications. Wound management still represents a challenging field which requires continuous efforts in scientific research for definition of novel approaches to facilitate and promote wound healing and tissue regeneration, particularly where the conventional therapies fail. Moreover, big concerns associated to the risk of wound infections and antibiotic resistance have stimulated the scientific research toward the definition of products with simultaneous regenerative and antimicrobial properties. Among the bioinspired materials for wound healing, this review focuses attention on a protein derived from the silkworm cocoon, namely silk fibroin, which is characterized by incredible biological features and wound healing capability. As demonstrated by the increasing number of publications, today fibroin has received great attention for providing valuable options for fabrication of biomedical devices and products for tissue engineering. In combination with antimicrobial agents, particularly with silver nanoparticles, fibroin also allows the development of products with improved wound healing and antibacterial properties. This review aims at providing the reader with a comprehensive analysis of the most recent findings on silk fibroin, presenting studies and results demonstrating its effective role in wound healing and its great potential for wound healing applications.

Hydrogel Dressings for the Treatment of Burn Wounds: An Up-To-Date Overview

Globally, the fourth most prevalent devastating form of trauma are burn injuries. Ideal burn wound dressings are fundamental to facilitate the wound healing process and decrease pain in lower time intervals. Conventional dry dressing treatments, such as those using absorbent gauze and/or absorbent cotton, possess limited therapeutic effects and require repeated dressing changes, which further aggravate patients' suffering. Contrariwise, hydrogels represent a promising alternative to improve healing by assuring a moisture balance at the burn site. Most studies consider hydrogels as ideal candidate materials for the synthesis of wound dressings because they exhibit a three-dimensional (3D) structure, which mimics the natural extracellular matrix (ECM) of skin in regard to the high-water amount, which assures a moist environment to the wound. There is a wide variety of polymers that have been used, either alone or blended, for the fabrication of hydrogels designed for biomedical applications focusing on treating burn injuries. The aim of this paper is to provide an up-to-date overview of hydrogels applied in burn wound dressings.

Physically crosslinked silk fibroin/hyaluronic acid scaffolds

Combining the properties of natural protein and polysaccharide is a promising strategy to generate bioactive biomaterials with controlled structure. Here, a new method of preparing water-insoluble silk fibroin/hyaluronic acid (SF/HA) scaffolds with tunable performances using an all-aqueous process is reported. Freezing-induced assembly was used to form silk I crystallization in the SF/HA blends. Silk I crystallization enhanced the stability of SF/HA scaffolds in water by forming silk I crystal networks to entrap blended HA without chemical cross-linking. Increasing HA content significantly enhanced the flexibility and water binding capacity of porous scaffolds, but high amount of HA reduced the water-stability of porous scaffolds due to insufficient silk I crystal cross-links. The enzymatic degradation behavior of the SF/HA scaffolds was investigated, revealing that the regulation ability of HA in the SF scaffolds. This novel nonchemically cross-linked protein/polysaccharide scaffold may be useful for soft tissue engineering due to excellent biocompatibility and tunable performances.

Konjac glucomannan/polyvinyl alcohol nanofibers with enhanced skin healing properties by improving fibrinogen adsorption

Skin tissue engineering aims to develop the effective healing strategy to repair the wound by optimizing skin scaffold materials. During the skin wound healing process, fibrin plays an important role due to the specific blood coagulation effect. In this study, the outstanding fibrin capability of konjac glucomannan (KGM) is demonstrated by the molecular dynamics simulation and confirmed by the protein adsorption experiments. A series of konjac glucomannan/polyvinyl alcohol (KGM/PVA) composites with different ratio are fabricated and their role in enhancing the skin repair is tested by in vitro cell culture and in vivo study. The E_ads (adsorption energy) between fibrin and KGM is about 30% larger than that between fibrin and PVA. The fibrinogen adsorption rates of PVA and KGM/PVA (5:5) composites can reach about 20% and 60%, respectively. The results show the blood adsorption capacity of KGM/PVA (5:5) composite can reach about 13 g/g. After 7 days of cell culture, the optical density values of 3T3 fibroblasts on KGM/PVA (5:5) composite could reach 0.8. The mechanical properties of the composites are also verified to meet the practical needs. Thus, we propose a potential wound dressing material strategy based on the materials design and the intrinsic properties of KGM.