Low temperature extrusion blown ε-polylysine hydrochloride-loaded starch/gelatin edible antimicrobial films

Starch as a smart, cheap, and green gatekeeper for the controlled release of propyl gallate from antioxidant biodegradable packaging films

Oxidative rancidity of food products and massive consumption of plastic packaging have put the necessity in manufacturing novel antioxidant biodegradable packaging films. A comprehensive investigation was conducted on starch/poly(butylene adipate-co-terephthalate) (PBAT) antioxidant blown films, in which starch acted as a gatekeeper for the controlled release of propyl gallate (PG). PG was well integrated into the matrices and bound to starch molecules by hydrogen bonding. All films showed strong anti-ultraviolet performance, and higher oxygen barrier than the traditional polyethylene film. Increasing starch proportions promoted the swelling of films and the release of PG, thereby causing higher antioxidant activity at the same contact time to free radical solutions. Similar polarity made PG prone to partition and rapid migration into the food simulants with higher ethanol concentration and the high-fat-content peanut butter. The film with 20:80 w/w starch/PBAT proportion and 3% w/w PG content effectively suppressed the oxidation of peanut butter within 300-day storage. Findings demonstrated this strategy for manufacturing starch/PBAT antioxidant films as a long-term active packaging in food industry.

Development of active film based on collagen and hydroxypropyl methylcellulose incorporating apple polyphenol for food packaging

Collagen (COL)-hydroxypropyl methylcellulose (HPMC) blended films with apple polyphenol (AP) as cross-linking agent and antioxidant compound were developed to produce biodegradable active packaging film. The effects of AP content on the rheological behavior of the blended solution, the structure, physicochemical and functional properties of the blended film were systematically investigated. The incorporation of AP increased the viscosity and reduced the fluidity of COL-HPMC solution. The results of rheological tests and FTIR analysis manifested the formation of hydrogen bonding interactions between collagen, HPMC and AP, which made the structures of COL-HP-AP films more compact. The mechanical strength, UV-blocking ability, water-resistance performance and thermostability were gradually enhanced as increasing AP content. DPPH free radical scavenging experiment showed that a small amount of AP could efficiently improve the antioxidant activity of COL-HP film, and with increasing AP content to 5 wt%, the scavenging rate was as high as 94.23 %. Active film containing 5 wt% AP showed obvious antibacterial effect on E. coli and S. aureus, and it could effectively prevent the oxidation of vitamin C and reduce the accumulation of MDA on green pepper during the storage. COL-HP-AP films have great potential in food packaging field for extending the shelf life of food.

Biopolymer-based packaging films/edible coatings functionalized with ε-polylysine: New options for food preservation

In light of the commendable advantages inherent in natural polymers such as biocompatibility, biodegradability, and cost-effectiveness, researchers are actively engaged in the development of biopolymer-based biodegradable food packaging films (BFPF). However, a notable limitation is that most biopolymers lack intrinsic antimicrobial activity, thereby restricting their efficacy in food preservation. To address this challenge, various active substances with antibacterial properties have been explored as additives to BFPF. Among these, ε-polylysine has garnered significant attention in BFPF applications owing to its outstanding antibacterial properties. This study provides a brief overview of the synthesis method and chemical properties of ε-polylysine, and comprehensively examines its impact as an additive on the properties of BFPF derived from diverse biopolymers, including polysaccharides, proteins, aliphatic polyesters, etc. Furthermore, the practical applications of various BFPF functionalized with ε-polylysine in different food preservation scenarios are summarized. The findings underscore that ε-polylysine, functioning as an antibacterial agent, not only directly enhances the antimicrobial activity of BFPF but also serves as a cross-linking agent, interacting with biopolymer molecules to influence the physical and mechanical properties of BFPF, thereby enhancing their efficacy in food preservation.

Design and characterization of tannic acid/ε-polylysine biocomposite packaging films with excellent antibacterial and antioxidant properties for beef preservation

The shelf life of beef is shortened by microbial infection, which limits its supply in the market. Active packaging film is expected to overcome this difficulty. In this study, an antibacterial/antioxidant SS-ε-PL-TA biocomposite film made by soy protein isolate/sodium alginate/ε-polylysine/tannic acid was designed and prepared. Due to the formation of hydrogen bonds and enhanced hydrophobic interactions, the biocomposite film showed enhanced mechanical property. Tensile strength increased from 22.8 ± 2.59 MPa to 64.34 ± 6.22 MPa, and elongation at break increased from 7.70 ± 1.07 % to 13.98 ± 0.22 %. The composite film displayed excellent antibacterial activity owing to the damage to cell membranes and biofilms of bacteria. Furthermore, the antioxidant activity also significantly increased (DPPH ∙ scavenging activity was 78.0 %). The shelf life of beef covered with the SS-ε-PL-TA film was extended by 3 days compared to the control group by decreasing lipid oxidation and inhibiting bacterial growth, showing a good application potential in food packaging.

Effect of DES lignin incorporation on physicochemical, antioxidant and antimicrobial properties of carboxymethyl cellulose-based films

Herein, three pretreated grapevine lignins were incorporated into carboxymethyl cellulose films. The effects of traditional NaOH pretreated lignin and DES (ChCl-LA, ChCl-LA & K2CO3-EG) pretreated lignin on film properties were compared. Modern analytical techniques were employed to systematically characterize the pretreated lignin and the different CMC-lignin films. The results showed that DES lignin was of high purity, low molecular weight, and homogeneous structure. It outperformed traditional NaOH lignin in terms of compatibility with CMC, enabling it to perform its bioactivity and physicochemical functions in films. This feature effectively enhanced the hydrophobicity, UV shielding ability, water vapor barrier, thermal stability, mechanical properties, and biological activity of CMC-DES lignin film. NMR (2D HSQC) showed that the excellent antioxidant and antibacterial capabilities of CMC-DES lignin film are due to the retention of butyl (S) and p-hydroxyphenyl (H) units in DES lignin, resulting in its rich phenolic hydroxyl content. The detailed structural elucidation of DES lignin's chemical interactions with CMC provided valuable insights into the advantageous properties observed in the films, presenting innovative solutions for applications in the food packaging and preservation industries.

Multi-functional polyvinyl alcohol/tannin acid composite films incorporated with lignin nanoparticles loaded by potassium sorbate

The biocompatible, biodegradable and strong polyvinyl alcohol-based films have been widely investigated and used in the field of active packaging. To endow with diverse function, this paper firstly prepared lignin nanoparticles loaded with potassium sorbate (LNP@PS) as additives to exploit additional antibacterial, UV blocking, oxygen barrier, and water barrier properties. Besides, tannin acid (TA) was incorporated for compensating and further enhancing mechanical properties. Results showed that the PVA-based composite films containing 3 % LNP@PS and 5 % TA could achieve the optimal tensile strength at 74.51 MPa, water vapor permeability at 7.015·10-13·g·cm/cm2·s·Pa and oxygen permeability at 1.93 cm3/m2·24 h MPa, which was an 165 % of increase, 47 % and 112 % of reduction respectively compared to pure PVA films. Additionally, the composite films exhibited apparently superior bacteria and oxygen resistance properties evidenced by microbial infection and free radical scavenging performance. In addition, the slow-release effect of PS assisted the strawberry preservation with an extension of 3 days, which provided a promising novel route to prepare active food packaging material.

Effects of dietary supplement of ε-polylysine hydrochloride on laying performance, egg quality, serum parameters, organ index, intestinal morphology, gut microbiota and volatile fatty acids in laying hens

BACKGROUND

ε-polylysine hydrochloride (ε-PLH) is a naturally occurring antimicrobial peptide extensively utilized in the food and medical industries. However, its impact on animal husbandry remains to be further explored. Therefore, the present study aimed to determine the effect of ε-PLH on laying hens' health and laying performance.

RESULTS

Dietary supplementation with ε-PLH to the diet significantly increased average egg weight during weeks 1-8. Meanwhile, compared with the control group, supplementation with ε-PLH decreased the feed egg ratio during weeks 9-12 and egg breakage rate during weeks 9-16 ，whereas it increased eggshell strength during weeks 1-4 and 13-16 . The ε-PLH 0.05% group increased yolk percentage during weeks 5-8 and yolk color during weeks 1-4 . Furthermore, ε-PLH supplementation significantly increased the concentrations of total protein, albumin, globulin and reproductive hormones estradiol, as well as decreased interleukin-1 beta and malondialdehyde in the serum. Compared with the control group, supplementation with 0.05% ε-PLH significantly increased the relative abundance of Cyanobacteria and Gastranaerophilales and decreased the abundance of Desulfovibrio and Streptococcus in the cecum microbiota. In addition, ε-PLH 0.1% supplementation also increased acetic acid content in the cecum.

CONCLUSION

Dietary supplementation with ε-PLH has a positive impact on both productive performance and egg quality in laying hens. Furthermore, ε-PLH can also relieve inflammation by promoting the immunity and reducing oxidative damage during egg production. ε-PLH has been shown to improve intestinal morphology, gut microbial diversity and intestinal health. © 2023 Society of Chemical Industry.

Effect of different screw speeds on the structure and properties of starch straws

To illustrate the action mechanism of screw speed on the performance of starch-based straws during the extrusion process, starch-based straws at different screw speeds were prepared using a twin-screw extruder and the structures and characteristics were compared. The results indicated that as screw speeds improved from 3 Hz to 13 Hz, the A chain of amylopectin increased from 25.47 % to 28.87 %, and the B3 chain decreased from 6.34 % to 3.47 %. The absorption peak of hydroxyl group shifted from 3296 cm-1 to 3280 cm-1. The relative crystallinity reduced from 13.49 % to 9.89 % and the gelatinization enthalpy decreased from 3.5 J/g to 0.2 J/g. The performance of starch straws did not increase linearly with increasing screw speeds. The starch straw produced at screw speed of 7 Hz had the largest amylose content, the highest gelatinization temperature, the minimum bending strength, and the lowest water absorption rate in hot water (80 °C). Screw speed had a remarkable impact on the mechanical strength, toughness and hydrophobicity of starch-based straws. This study revealed the mechanism of screw speed on the mechanical strength and water resistance of starch straws in the thermoplastic extrusion process and created the theoretical basis for the industrial production of starch-based straws.

Effects of starch-fatty acid complexes with different fatty acid chain lengths and degrees of saturation on the rheological and 3D printing properties of corn starch

The effect of corn starch-fatty (CS-FA) complexes from varying carbon chain length and degree of unsaturation on the rheological and 3D printing properties of corn CS-FA complex gels. The CS-FA complexes with longer carbon chain lengths and lower saturation enhanced the ability of gels to bind water, promoting the formation of intermolecular hydrogen bonds. The CS-FA complexes inhibit retrogradation and increase the amount of bound water, thereby reducing the structural integrity and transforming the original skeleton structure into a flake-like structure. These changes in gel structure led to lower flow stress and storage modulus for CS-FA gels containing FAs with shorter carbon chain lengths and lower saturation, resulting in reduced "extrusion swelling" of the material and facilitating its extrusion. The decreased "extrusion swelling" of gel improved print line width and printing performance. The CS-FA complex gel-printed product with a 12-carbon chain FA has the greatest printing accuracy, thanks to its moderate G', flow stress, and viscosity. This study provides important information for the CS-FA complexes for the preparation of starch-based 3D printing materials.

Physicochemical properties and pork preservation effects of lotus seed drill core powder starch-based active packaging films

Lotus seed drill core powder starch (LCPS)-based active packaging films incorporated with cellulose nanocrystals (CNC) and grapefruit essential oil-corn nanostarch Pickering emulsion (ECPE) were characterized, and their pork preservation effects were investigated in this study. In contrast with corn, potato and rice starches, LCPS showed higher amylose content, elliptical and circular shape with more uniform size distribution. Furthermore, LCPS film exhibited lower light transmittance, stronger tensile strength, and smaller elongation at break compared to the other starch films. Then, the LCPS film containing 4 % CNC and 9 % ECPE was fabricated which had stronger mechanical properties, lower water vapor permeability and oxygen transmission rate, and denser network structure. FTIR and XRD analyses also confirmed that CNC and ECPE were successfully implanted into the LCPS matrix without damaging the crystalline structure of LCPS. Herein, the LCPS/CNC/ECPE film exerted potential antibacterial activity against Escherichia coli and Staphylococcus aureus. Besides, packaging with this composite film significantly preserved the pork during cold storage via decreasing its juice loss rate, pH value, total number of colonies, total volatile base nitrogen and thiobarbituric acid reactive substance values. The present study will provide a theoretical basis for the application of LCPS as new biodegradable active films.

Techno-functional properties of active film based on guar gum-propolis and its application for "Nanguo" pears preservation

Guar gum (GG) composite films, incorporating the ethanolic extract of propolis (EEP), were prepared and subjected to a comprehensive investigation of their functional characteristics. The addition of EEP resulted in a discernible enhancement in the opacity, moisture barrier capacity, and elongation at break. Incorporating EEP led to a noteworthy increase in the total phenolic and total flavonoid content of the films, resulting in superior antioxidant capacity upon GG-EEP films. Remarkably, the addition of 5 % EEP yielded noteworthy outcomes, manifesting in a DPPH radical scavenging rate of 47.60 % and the ABTS radical scavenging rate of 94.87 %, as well as FRAP and cupric reducing power of 331.98 mmol FeSO4-7H2O kg-1 and 56.95 μg TE mg-1, respectively. In addition, GG-EEP films demonstrated antifungal effect against Penicillium expansum and Aspergillus niger, along with a sustained antibacterial effect against Escherichia coli and Staphylococcus aureus. GG-EEP films had superior inhibitory ability against Gram-positive bacteria than Gram-negative bacteria. Crucially, GG-EEP composite films played a pivotal role in reducing both lesion diameter and depth, concurrently mitigating weight loss and firmness decline during the storage period of "Nanguo" pears. Therefore, GG-EEP composite films have the considerable potential to serve as advanced and effective active packaging materials for food preservation.

Biopolymer films incorporated with chlorogenic acid nanoparticles for active food packaging application

Food packaging is innovating towards more environmental-friendly polymers and broader applications of bioactive compounds. In this study, active packaging materials were successfully prepared by incorporating chlorogenic acid (CGA) nanoparticles into pullulan/gelatin polymer matrixes. The rhamnolipid (RL) and/or CGA were combined with chitosan (CS) to synthesize active nanoparticles by the ionic crosslinking method. The film containing CS/RL/CGA nanoparticles (F/CRC) exhibited both ultrahigh visible light (400-760 nm) transmittance (approximately 90%) and UVA (320-400 nm)-blocking efficiency (89.06%). Its fluorescent properties can be used for anti-counterfeiting. Significantly, the bacterial inhibition rates of F/CRC against E. coli and S. aureus were 92.14% and 98.72%. F/CRC also showed good antioxidant capability and biosafety. Finally, the packaging test further indicated that F/CRC could delay the browning of bananas and the bacteria growth of chicken samples. This work presents a green and feasible route to produce functional materials with UV-shielding properties for packaging applications.

Design and optimization of ε-poly-l-lysine with specific functions for diverse applications

ε-Poly-l-lysine (ε-PL) is a natural homo-poly(amino acid) which can be produced by microorganisms. With the advantages in broad-spectrum antimicrobial activity, biodegradability, and biocompatibility, ε-PL has been widely used as a preservative in the food industry. Different molecular architectures endow ε-PL and ε-PL-based materials with versatile applications. However, the microbial synthesis of ε-PL is currently limited by low efficiencies in genetic engineering and molecular architecture modification. This review presents recent advances in ε-PL production and molecular architecture modification of microbial ε-PL, with a focus on the current challenges and solutions for the improvement of the productivity and diversity of ε-PL. In addition, we highlight recent examples where ε-PL has been applied to expand the versability of edible films and nanoparticles in various applications. Commercial production and the challenges and future research directions in ε-PL biosynthesis are also discussed. Currently, although the main use of ε-PL is as a food preservative, ε-PL and ε-PL-based polymers have shown excellent application potential in biomedical fields. With the development of synthetic biology, the design and synthesis of ε-PL with a customized molecular architecture are possible in the near future. ε-PL-based polymers with specific functions will be a new trend in biopolymer manufacturing.

Improved lipase performance by covalent immobilization of Candida antarctica lipase B on amino acid modified microcrystalline cellulose as green renewable support

Development of immobilized lipase with excellent catalytic performance and low cost is the major challenge for large-scale industrial applications. In this study, green renewable microcrystalline cellulose (MCC) that was hydrophobically modified with D-alanine (Ala) or L-lysine (Lys) was used for immobilizing Candida antarctica lipase B (CALB). The improved catalytic properties were investigated by experimental and computational methods. CALB immobilized on MCC-Ala with higher hydrophobicity showed better catalytic activity than CALB@MCC-Lys because the increased flexibility of the lid region of CALB@MCC-Ala favored the formation of open conformation. Additionally, the low root mean square deviation and the high β-sheet and α-helix contents of CALB@MCC-Ala indicated that the structure became more stable, leading to a significantly enhanced stability (54.80% and 90.90% relative activity at 70 °C and pH 9.0, respectively) and good reusability (48.92% activity after 5 cycles). This study provides a promising avenue to develop immobilized lipase with high catalytic properties for industry applications.

A chitosan derivative/phytic acid polyelectrolyte complex endowing polyvinyl alcohol film with high barrier, flame-retardant, and antibacterial effects

Films with high barrier, flame-retardant, and antibacterial properties are beneficial in terms of food and logistics safety. Herein, a polyelectrolyte complex (PEC) of N-(2-hydroxyl)-propyl-3-trimethylammonium chitosan chloride (HTCC, chitosan derivative) and phytic acid (PA) was successfully prepared and then incorporated into a polyvinyl alcohol (PVA) matrix to fabricate a composite film with satisfactory barrier, fire-retardant, and antibacterial properties. The influence of HTCC/PA (HTPA) on the structural, physical and functional properties of the PVA matrix was investigated. Compared with the PVA film, PVA-HTPA6 film exhibited 3.38 times of flexibility and 83.33 % and 80.64 % of water vapor permeability and oxygen permeability, respectively. Benefiting from HTPA, the PVA-HTPA6 film exhibited outstanding flame-retardant capacity, with a high LOI value (33.30 %) and immediate self-extinguishing behaviour. Furthermore, the HTPA endowed the films with excellent antibacterial properties. Compared with other films, the PVA-HTPA6 film effectively maintained the quality of pork during storage at 4 °C for 9 days. Our findings indicate that the films are promising for packaging and logistics safety with oil-containing foods.

Starch/poly(butylene adipate-co-terephthalate) blown antimicrobial films based on ε-polylysine hydrochloride and different nanomontmorillonites

With increasing awareness on environmental protection and food safety, the development of biodegradable antimicrobial packaging materials has been paid growing emphasis. In this work, starch/poly(butylene adipate-co-terephthalate)/ε-polylysine hydrochloride films were prepared by extrusion blowing, and five commercial organically modified nanomontmorillonites (OMMT, including DK1, DK2, DK3, DK4, and DK5) were used as reinforcing agents. Intercalated structures were formed in the nanocomposite films, especially for those with DK3 and DK4 owing to their higher hydrophobicity and larger interlayer spacing. Adding OMMT weakened hydrogen bonds and the gelatinization/plasticization degree of starch. Morphology analysis revealed that the agglomeration of OMMT occurred in the films, but the film containing DK3 still showed a relatively homogeneous microstructure. Loading OMMT enhanced the strength, deformation resistance, thermal stability, surface hydrophobicity, but decreased barrier properties and water sensitivity of the films. Antimicrobial activity showed that the OMMT and ε-polylysine hydrochloride possessed a synergistic effect against Staphylococcus aureus and Escherichia coli. The maximum inhibition rate was observed in that with DK4, approaching 100 %. Findings supported the application of commercial OMMT in manufacturing biodegradable antimicrobial blown films.

Physicochemical, antibacterial and food preservation properties of active packaging films based on chitosan/ε-polylysine-grafted bacterial cellulose

To address the environmental and food contamination issues caused by plastics and microorganisms, antimicrobial films using natural polymers has attracted enormous attention. In this work, we proposed a green, convenient and fast approach to prepare antimicrobial films from chitosan (CS), bacterial cellulose (BC) and ε-polylysine (ε-PL). The effects of different concentrations of ε-PL (0 %, 0.25 %, 0.5 %, 0.75 %, 1 %, w/v) on the physicochemical properties and antibacterial activity of composite films (CS-DABC-x%PL) were systematically investigated. Furthermore, a comprehensive comparison with purely physically mixed CS-BC-x%PL films provides a deeper understanding of the subject matter. Characterization tests of the films were conducted using scanning electron microscope (SEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The results suggested that the incorporation of 0.5 % ε-PL reduced the water solubility of the composite film by 19.82 %, along with improved the tensile strength and thermal stability by 37.31 % and 28.54 %. As ε-PL concentration increased to 1 %, the antibacterial performance of the films gradually enhanced. Additionally, the CS-DABC-0.5%PL film demonstrated effectiveness in delaying the deterioration of tilapia. These findings imply that this novel green packaging material holds significant potential in food preservation due to its promising antibacterial properties.

Influence of enzymatic modification on the basis of improved extrusion cooking technology (IECT) on the structure and properties of corn starch

Enzymatic modification can directly affect the structure and properties of starch, but generally causes high energy consumption in drying process. Improved extrusion cooking technology (IECT) itself is a starch modification technology. In this work, a co-extrusion method of starch with 42 % moisture and enzyme was adopted to reveal the effects of different enzyme dosages on the structure and properties of corn starch. After enzyme treatment on the basis of IECT, starch granules were broken into fragments without the occurrence of clear Maltese cross. R1047/1022 and R995/1022 values, peak intensity of Raman spectra and gelatinization temperature decreased, and the full width at half maximum at 480 cm-1 of Raman spectra raised. Moreover, the bound water proportion decreased from 87.44 % to 85.84 % ∼ 78.67 %, and the maximum light transmittance and dextrose equivalent values increased to 34.13 % and 26.14, respectively. The solubility of starch granules was all above 60 %. Findings supported that the mechanochemical effect of IECT on starch was conducive to the enzymatic modification.

Characterization, antioxidant and antibacterial activities of gelatin-chitosan edible coated films added with Cyclocarya paliurus flavonoids

In this study, gelatin-chitosan (GEL-CS) composite films added with 0.1 %, 0.2 %, and 0.3 % Cyclocarya paliurus flavonoids (CPF) were prepared. Then their appearance properties, mechanical properties, barrier properties, microstructure, thermal stability properties, antioxidant activity, and antibacterial properties were investigated. As compared with GEL-CS film, the GEL-CS films with CPF were darker in color, had higher water vapor barrier, higher elongation at break, and higher thermal stability. Additionally, microstructure analysis with Fourier infrared spectroscopy, scanning electron microscopy, and X-ray diffraction demonstrated that hydrogen bonding was the main force for cross-linking CPF with other membrane substrates. Moreover, the addition of CPF strengthened the antioxidant and antimicrobial properties of the membranes. These results indicated that the CPF addition could endow membranes with more excellent functional properties and bioactivity, accompanied by environmentally friendly and edible features. The GEL-CS-CPF composite film would be a potential and prospective packing material for food preservation applications.

Starch-gelatin blend films: A promising approach for high-performance degradable food packaging

Packaging plays a vital role in safeguarding food from environmental factors and contamination. However, the overuse and improper disposal of non-biodegradable plastic packaging materials have led to environmental concerns and health risks. To address these challenges, the development of degradable food packaging films is crucial. Biodegradable polymers, including natural biopolymers like starch (ST) and gelatin (GE), have emerged as promising alternatives to traditional plastics. This review focuses on the utilization of ST-GE blends as key components in composite films for food packaging applications. We discuss the limitations of pure ST-GE films and explore methods to enhance their properties through the addition of plasticizers, cross-linkers, and nanoparticles. The blending of ST-GE, facilitated by their good miscibility and cross-linking potential, is highlighted as a means to improve film performance. The review also examines the impact of various additives on the properties of ST-GE blend films and summarizes their application in food preservation. By providing a comprehensive overview of ST-GE hybrid systems, this study aims to contribute to the advancement of sustainable and effective food packaging solutions.

Construction and evaluation of environment-friendly POSS multi-crosslinked mulch film based on bone gelatin

The non-degradable traditional polyethylene (PE) mulch film has caused great harm to both the ecological environment as well as human health. Therefore, the biodegradable bone gelatin (B-Gel) was innovatively selected to build the mulch film. To further enhance the toughness of the B-Gel mulch films, a POSS star-shaped polymer/bone gelatin (P(POSS-AGE-HEA)/B-Gel) composite was prepared by introducing POSS star-shaped polymer into B-Gel via in situ polymerization using polyhedral oligomeric silsesquioxane (POSS), allyl glycidyl ether (AGE) and hydroxyethyl acrylate (HEA) as raw material, and then was cast to obtain the P(POSS-AGE-HEA)/B-Gel mulch film. The epoxy group of POSS star-shaped polymer with the -COOH and -NH2 of B-Gel forms a covalent bond, and the hydroxyl group with the active groups of B-Gel forms hydrogen bonds. Meanwhile, the multiple side chains of POSS star-shaped polymer are intertwined with B-Gel. These covalent and hydrogen bonds as sacrificial bonds for effective energy dissipation giving the bone gelatin-based film excellent mechanical properties with a tensile strength of 7.56 ± 0.64 MPa and elongation at break of 197.49 ± 17.63 %. Additionally, it also demonstrated sound water vapor barrier, surface hydrophobicity, light transmittance and the effect of facilitating the growth and germination ratio (93.75 %) of wheat.

Amino carboxymethyl chitosan//dialdehyde starch/polyvinyl alcohol double-layer film loaded with ε-polylysine

To develop food packaging with good antibacterial activity and mechanical performance, four amino carboxymethyl chitosan (ACC)//dialdehyde starch (DAS) /polyvinyl alcohol (PVA) films were prepared by Schiff base and hydrogen bond interactions for efficient loading and release of ε-polylysine (ε-PL). The effects of the Schiff base reaction on the physicochemical properties of the films were explored based on the different aldehyde group contents in DAS. The ACC//DAS₄/PVA film exhibited a tensile strength of 62.5 MPa, and the water vapor and oxygen permeability was 8.77 × 10^-3·g·mm/m²·d·kPa and 0.15 × 10³·cm³·mm/m²·d, respectively. By leveraging the Schiff base reaction, the film swelling properties were improved by adjusting the cross-link density, mesh size, and molecular mass between the cross-links. The ACC//DAS₄/PVA film could efficiently load ε-PL with a value of 98.44% and long-term release in a food simulant of 10% ethanol at 25 °C for 120 min. Moreover, the ACC-ε-PL//DAS₄/PVA film was successfully used for salmon preservation.

Effect of high-intensity ultrasonic time on structural, mechanical, and physicochemical properties of β-conglycinin (7S)- Transglutaminase (TGase) composite edible films

The β-conglycinin (7S) was pre-treated with high-intensity ultrasonic (HIU) and subsequently formed into composite edible films with the transglutaminase (TGase) method. Effects of HIU pretreatment time (0, 5, 10, 15, and 20 min) on the conformation of 7S and structural and application properties of 7S-TGase films were evaluated. The analysis of 7S conformation results revealed that HIU pretreatment for 0-10 min significantly dissociated the 7S, exposed internal hydrophobic groups of protein, increased its intermolecular hydrogen bonds, and altered the protein secondary and tertiary structure. The structural properties of films were evaluated by SEM, XRD, and ATR-FTIR. SEM showed that HIU reduced film wrinkles and cracks and improved unevenness. XRD and ATR-FTIR indicated that the film obtained an enlarged crystallinity, and the amide I and amide II regions of films were peak-shifted which is usually associated with the formation of covalent bonds. Notably, analysis of intermolecular force showed that HIU facilitated the formation of hydrogen bonds, hydrophobic interactions, and ε-(γ-glutamyl) lysine bonds in 7S-TGase films. The above structural changes in 7S and films were beneficial for the application properties of films. Results indicated that 10 min HIU pretreatment effectively improved the mechanical properties and water resistance, reduced water vapor permeability and oxygen permeability, and decreased the opacity of 7S-TGase films. However, the color of the film was not affected by the HIU, with an overall bright and yellowish color.

Development of chitosan/konjac glucomannan/tragacanth gum tri-layer food packaging films incorporated with tannic acid and ε-polylysine based on mussel-inspired strategy

Constructing biodegradable food packaging with good mechanics, gas barrier and antibacterial properties to maintain food quality is still challenge. In this work, mussel-inspired bio-interface emerged as a tool for constructing functional multilayer films. Konjac glucomannan (KGM) and tragacanth gum (TG) with physical entangled network are introduced in the core layer. Cationic polypeptide ε-polylysine (ε-PLL) and chitosan (CS) producing cationic-π interaction with adjacent aromatic residues in tannic acid (TA) are introduced in the two-sided outer layer. The triple-layer film mimics the mussel adhesive bio-interface, where cationic residues in outer layers interact with negatively charged TG in the core layer. Furthermore, a series of physical tests showed excellent performance of triple-layer film with great mechanical properties (tensile strength (TS): 21.4 MPa, elongation at break (EAB): 7.9 %), UV-shielding (almost 0 % UV transmittance), thermal stability, water, and oxygen barrier (oxygen permeability (OP): 1.14 × 10^-3 g/m s Pa and water vapor permeability (WVP): 2.15 g mm/m² day kPa). In addition, the triple-layer film demonstrated advanced degradability, antimicrobial functions, and presented good moisture-proof performance for crackers, which can be potentially applied as dry food packaging.

Development of polylactic acid based antimicrobial food packaging films with N-halamine modified microcrystalline cellulose

Bio-based "green" films with superior antimicrobial activity were developed from polylactic acid (PLA) and cyclic N-halamine 1-chloro-2,2,5,5-tetramethyl-4-imidazolidinone (MC) grafted microcrystalline cellulose (MCC) fibers (herein referred to as g-MCC). The structure of g-MCC was characterized by Fourier Transform Infrared (FT-IR) and Nuclear Magnetic Resonance (NMR) spectroscopy. Results indicated N-halamine MC was successfully grafted onto MCC fibers, with a grafting percentage of 10.24 %. The grafting improved compatibility between g-MCC and PLA, leading to an excellent dispersion of g-MCC in the film matrix, and a superior transparency of the g-MCC/PLA compared to that of the MCC/PLA films. Additionally, the enhanced compatibility the g-MCC/PLA films produced better mechanical properties including mechanical strength, elongation at break and initial modulus than those of both MCC/PLA and MC/PLA composites. With N-halamine, g-MCC/PLA completely inactivated all the inoculated Escherichia coli and Staphylococcus aureus within 5 and 30 min of contact, respectively. More importantly, the migration test showed that the oxidative chlorine of g-MCC/PLA was highly stable than that of MC/PLA films, providing a long-term antimicrobial activity. Finally, preservation test conducted on fresh bread slices further demonstrated its promising applications in the food industry.

A hydroxypropyl methylcellulose/hydroxypropyl starch nanocomposite film reinforced with chitosan nanoparticles encapsulating cinnamon essential oil: Preparation and characterization

Active packaging derived from polysaccharides plays an important role in prolonging the shelf life of food. In this study, cinnamon essential oil (CEO)-loaded chitosan nanoparticles (CNs) were prepared and embedded in hydroxypropyl methylcellulose (HPMC)/hydroxypropyl starch (HPS) blends to enhance the physicochemical and biofunctional properties of the formed films. Different concentrations (25, 50, 75, and 100 μL/mL) of CEOs were encapsulated with CNs to form CEO-CNs, as confirmed by Fourier Transform Infrared Spectrometer (FTIR), X-Ray Diffraction (XRD), and scanning electron microscope (SEM) images. The prepared CEO-CNs were incorporated into the HPMC/HPS film-forming matrix to prepare reinforced nanocomposite films. SEM images showed that the CEO-CNs were dispersed in the HPMC/HPS matrix, thus filling the void space in the composite matrix and significantly improving the mechanical and barrier properties of the bio-nanocomposite films. The elongation at break of the reinforced films improved from 8.54 ± 0.53 MPa to 24.81 ± 0.47 MPa, and the water vapor permeability was reduced by nearly 30 %. FTIR and XRD analyses indicated the formation of hydrogen bonds between CEO-CNs and HPMC/HPS polymer molecules. Release studies showed that the nanocomposite film was capable of sustained release of CEO, which imparted antioxidant (radical scavenging activity of 27.66-42.19 %) and antimicrobial properties (inhibition of Escherichia coli and Aspergillus flavus growth). Therefore, these HPMC/HPS nanocomposite films with enhanced properties may have great potential for food preservation.

Development of composite film based on collagen and phenolic acid-grafted chitosan for food packaging

Collagen, a fibrous protein with triple-helical structure, is a good film-forming substrate for food packaging films because collagen films show advantages of biodegradability, high mechanical strength and good water resistance. However, collagen films lack functional activities, which may limit their applications in the field of active packaging. In this work, phenolic acid-grafted-chitosan was blended with collagen to improve the antioxidant and antimicrobial activities of collagen films. Gallic acid (GA), ferulic acid (FA) and caffeic acid (CA) were respectively grafted onto chitosan, and the physical properties and functional activities of the collagen/phenolic acids-g-chitosan (CGC, CFC and CCC) films were compared. The prepared films presented varying degrees of yellow color, and exhibited significantly improved UV light blocking capacity, antioxidant and antimicrobial properties due to the function of phenolic acid. Moreover, compared with collagen/chitosan (CC) film, CGC, CFC and CCC films showed higher mechanical strength (69.08-73.79 MPa), higher thermal denaturation temperature (69.4-71.2 °C), and lower water vapor permeability values (2.64-2.98 × 10^-12 g m^-1 s^-1 Pa^-1). The properties of collagen/ phenolic acids-g-chitosan films were greatly affected by the type of phenolic acid grafted. CGC film had the best antioxidant property as well as the best mechanical property, thermostability, UV light and water vapor blocking capacity.

Effects of adding methods and modification types of cellulose on the physicochemical properties of starch/PBAT blown films

This study revealed the relationship between cellulose types/adding methods and film properties, in which sodium carboxymethyl cellulose (CMC), hydroxypropyl methyl cellulose (HPMC), and microcrystalline cellulose (MCC) were added into starch/PBAT blown films in powder, aqueous solution, and emulsion forms, respectively. Cellulose interacted with starch networks via hydrogen bonds, and those added in emulsion form made more homogeneous film morphologies. MCC emulsion enhanced the film strength (40%) and modulus (149%) to the greatest extent, while comprehensively, HPMC emulsion possessed better reinforcement effects on the films, which increased mechanical properties (31% ~ 100%), moisture barrier (20%), oxygen barrier (93%), surface hydrophobicity (20%), as well as water resistance (12% ~ 76%). Findings supported the application of cellulose in high-throughput biodegradable films, and the high-content starch/PBAT blown films reinforced by HPMC emulsion had great potential in commercial packaging fields.

Recent Advances and Applications in Starch for Intelligent Active Food Packaging: A Review

At present, the research and innovation of packaging materials are in a period of rapid development. Starch, a sustainable, low-cost, and abundant polymer, can develop environmentally friendly packaging alternatives, and it possesses outstanding degradability and reproducibility in terms of improving environmental issues and reducing oil resources. However, performance limitations, such as less mechanical strength and lower barrier properties, limit the application of starch in the packaging industry. The properties of starch-based films can be improved by modifying starch, adding reinforcing groups, or blending with other polymers. It is of significance to study starch as an active and intelligent packaging option for prolonging shelf life and monitoring the extent of food deterioration. This paper reviews the development of starch-based films, the current methods to enhance the mechanical and barrier properties of starch-based films, and the latest progress in starch-based activity, intelligent packaging, and food applications. The potential challenges and future development directions of starch-based films in the food industry are also discussed.

Effect of Psyllium Husk Addition on the Structural and Physical Properties of Biodegradable Thermoplastic Starch Film

The research subject was the analysis of the microstructure, barrier properties, and mechanical resistance of the psyllium husk (PH)-modified thermoplastic starch films. The tensile tests under various static loading conditions were not performed by researchers for this type of material before and are essential for a more precise assessment of the material’s behavior under the conditions of its subsequent use. The film samples were manufactured by the casting method. PH addition improved starch gelatinization and caused a decrease in failure strain by 86% and an increase in failure stress by 48% compared to pure films. Fourier transform infrared spectroscopy results showed the formation of additional hydrogen bonds between polysaccharides in starch and PH. An increase in the number of hydrophilic groups in the modified films resulted in a faster contact angle decrease (27.4% compared to 12.8% for pure ones within the first 5 s); however, it increased the energy of water binding and surface complexity. The modified films showed the opacity at 600 nm, 43% higher than in the pure starch film, and lower transmittance, suggesting effectively improving barrier properties to UV light, a potent lipid-oxidizing agent in food systems.

Recent development in antibacterial activity and application of nanozymes in food preservation

Nanozymes with excellent broad-spectrum antibacterial properties offers an alternative strategy for food preservation. This review comprehensively summarized the antibacterial mechanisms of nanozymes, including the generation of reactive oxygen species (ROS) and the destruction of biofilms. Besides, the primary factors (size, morphology, hybridization, light, etc.) regulating the antibacterial activity of different types of nanozymes were highlighted in detail, which provided effective guidance on how to design highly efficient antibacterial nanozymes. Moreover, this review presented elaborated viewpoints on the unique applications of nanozymes in food preservation, including the selection of nanozymes loading matrix, fabrication techniques of nanozymes-based antibacterial films/coatings, and the recent advances in the application of nanozymes-based antibacterial films/coatings in food preservation. In the end, the safety issues of nanozymes have also been mentioned. Overall, this review provided new avenues in the field of food preservation and displayed great prospects.

Gelatin/Chitosan Films Incorporated with Curcumin Based on Photodynamic Inactivation Technology for Antibacterial Food Packaging

Photodynamic inactivation (PDI) is a new type of non-thermal sterilization technology that combines visible light with photosensitizers to generate a bioactive effect against foodborne pathogenic bacteria. In the present investigation, gelatin (GEL)/chitosan (CS)-based functional films with PDI potency were prepared by incorporating curcumin (Cur) as a photosensitizer. The properties of GEL/CS/Cur (0.025, 0.05, 0.1, 0.2 mmol/L) films were investigated by evaluating the surface morphology, chemical structure, light transmittance, and mechanical properties, as well as the photochemical and thermal stability. The results showed a strong interaction and good compatibility between the molecules present in the GEL/CS/Cur films. The addition of Cur improved different film characteristics, including thickness, mechanical properties, and solubility. More importantly, when Cur was present at a concentration of 0.1 mM, the curcumin-mediated PDI inactivated >4.5 Log CFU/mL (>99.99%) of Listeria monocytogenes, Escherichia coli, and Shewanella putrefaciens after 70 min (15.96 J/cm2) of irradiation with blue LED (455 ± 5) nm. Moreover, Listeria monocytogenes and Shewanella putrefaciens were completely inactivated after 70 min of light exposure when the Cur concentration was 0.2 mM. In contrast, the highest inactivation effect was observed in Vibrio parahaemolyticus. This study showed that the inclusion of Cur in the biopolymer-based film transport system in combination with photodynamic activation represents a promising option for the preparation of food packaging films.