Nanocellulose: A mini-review on types and use in drug delivery systems

From farm to function: Exploring new possibilities with jute nanocellulose applications

Recent scientific interest has surged in the application of bioresources within nanotechnology, primarily because of their eco-friendly nature, wide availability, and cost-effectiveness. Jute is globally recognized as the second most prevalent source of natural cellulose fibers, and it produces a significant quantity of jute sticks as a byproduct. Nanocellulose (NC), which includes cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC), exhibits exceptional properties such as high strength, toughness, crystallinity, thermal stability, and stiffness. These attributes enable its versatile use across various sectors. The extensive surface areas and abundant hydroxyl groups of nanocellulose allow for diverse surface modifications, facilitating the design of advanced functional materials. This comprehensive review provides an overview of recent advancements in the synthesis, characterization, and potential applications of nanocellulose derived from jute. As a versatile natural fiber, jute holds immense potential across various research domains, including nanocellulose synthesis, scaffold fabrication, nanocarbon material preparation, life sciences, electronics and energy storage devices, drug delivery systems, nanomaterial synthesis, food packaging and paper industries. Additionally, its use extends to polymeric nanocomposites, sensors, and coatings. This study summarizes the extensive utilization of jute, emphasizing its versatility and potential across diverse research fields.

Recent advances in modified chitosan-based drug delivery systems for transmucosal applications: A comprehensive review

Recently, transmucosal drug delivery systems (TDDSs) have been extensively studied because they protect therapeutic agents from degradation; improve drug residence time at the mucosal membranes; and facilitate sustained drug release for a prolonged period. Chitosan is a well-researched polymeric excipient due to its biocompatibility, non-toxicity, biodegradability, mucoadhesive, antimicrobial, and low immunogenicity. Its limited mucoadhesiveness in the physiological environment necessitated its chemical modification. This review highlights the recent advances in the chemical modification of chitosan with various chemical groups to generate various functionalized chitosan derivatives, such as thiolated, acrylated, methacrylated, boronated, catechol, and maleimide-functionalized chitosans with superior mucoadhesive capabilities compared to the parent chitosan. Moreover, it presents the different prepared dosage forms, such as tablets, hydrogels, films, micro/nanoparticles, and liposomes/niosomes for drug administration within various mucosal routes including oral, buccal, nasal, ocular, colonic, intravesical, and vaginal routes. The reported data from preclinical studies of these pharmaceutical formulations have revealed the controlled and target-specific delivery of therapeutics because of their formation of covalent bonds with thiol groups on the mucosal surface. All functionalized chitosan derivatives exhibited long drug residence time on mucosal surfaces and sustainable drug release with excellent cellular permeability, drug efficacy, and biocompatibility. These promising data could be translated from the research laboratories to the clinics with consistent and intensive research effort.

Biofabrication of aminated nanocellulose reinforced polyvinyl alcohol/chitosan nanofibrous scaffold for sustained release of diltiazem hydrochloride

In the modern environment conscious era, there has been a huge demand for the effective green method to fabricate biomaterials for sustained transdermal release of diltiazem hydrochloride to treat hypertension and cardiac failure. In this vein, the present study explores the amination of waste jute sourced nanocellulose (ANC) and its effect as a reinforcing filler to design electrospun polyvinyl alcohol (PVA)/chitosan based polymeric nanofibrous scaffold for drug delivery. The characterization results of FTIR (Fourier Transform Infrared Spectroscopy) confirm the successful chemical modification of nanocellulose (NCC). SEM (Scanning Electron Microscopy) results indicate the morphological modifications in ANC due to grafting. ANC enhances the mechanical properties of scaffold and sustains the release of the loaded drug to 67.89±3.39% as compared to the pure PVA/chitosan scaffold of 92.63±4.63% over a period of 72 h as shown by the results of in-vitro drug release study. Moreover, the incorporation of 0.5 % ANC improves the anti-bacterial activity against both gram-positive (97.4±4.87%, reduction in viable cells count) and gram-negative bacteria (98.5±4.93%, reduction in viable cells count). Further, the skin irritation and MTT assay authenticate the biocompatibility of the developed scaffold. The overall findings hence prove the efficacy of the engineered scaffold as a potential transdermal patch for sustained drug delivery applications.

Comparative study of Lepidium sativum orally administered seeds, hydrogel and atorvastatin on obesity of rats fed on a high fat diet

BACKGROUND

Obesity has become a prevalent issue worldwide, leading to various complications such as hyperlipidemia, diabetes, and cardiovascular problems. Statins, as FDA approved anti-hyperlipidemic drugs, still pose some concerns upon their administration. Recently, researchers have looked for natural products as an alternative to manage hyperlipidemia and obesity.

AIM

This work aimed to study the hypolipidemic effect of Lepidium sativum garden cress (GC) from different preparations; orally administered seeds, and hydrogel, in comparison to atorvastatin.

METHODS

GC hydrogel was prepared from the GC aqueous extract and pharmaceutically evaluated for its pH, spreadability, seeds content, homogeneity, rheology, and in vitro release. The rat's body weight, blood glucose levels, total lipid profile, and liver biomarkers were evaluated on obese rats for one month. In addition, the histopathology study was also performed.

RESULTS

GC hydrogel had acceptable pharmaceutical properties and showed a sustained release performance over 24 h. Oral and topical GC significantly reduced the lipid profiles, blood sugar and ALT, AST levels more than the negative control group and comparable to atorvastatin. It was found that oral GC showed a significant effect on the percentage decrease in the rat's body weight than the applied hydrogel. Histopathology study revealed a better outcome in the histological structure of pancreas and liver compared with rats feed on high fat diet post-treatment for one month.

CONCLUSION

GC orally administered, or topically applied hydrogel could be a promising, safe alternative formulation to atorvastatin in managing hyperlipidemia and normalizing body weight of obese rats.

Cellulose from dinoflagellates as a versatile and environmentally friendly platform for the production of functionalised cellulose nanofibres

Cellulose nanofibres (CNFs), also known as nano-fibrillated cellulose, have emerged as highly promising sustainable biomaterials owing to their numerous advantages, including high accessibility, long-term sustainability, low toxicity, and mechanical properties. Recently, marine organisms have been explored as novel and environmentally friendly sources of cellulose fibers (CFs) due to their easy cultivation, extraction and biocompatibility. Dinoflagellates, a group of marine phytoplankton, have gained particular attention due to their unique cellulosic morphology and lignin-free biomass. Previously, we showed that the unique amorphous nature of dinoflagellate-derived cellulose offers various benefits. This study further explores the potential of dinoflagellate-derived CFs as a sustainable and versatile CNF source. Extracted dinoflagellate cellulose is effectively converted into CNFs via one-step TEMPO oxidation without significant polymer degradation. In addition, the biological compatibility of the CNFs is improved by amine-grafting using putrescine and folic acid. The products are characterised by conductometric titration, zeta potential measurements, TGA, GPC, FTIR, SEM/TEM, XRD, and XPS. Finally, in a proof-of-principle study, the application of the functionalised CNFs in drug delivery is tested using methylene blue as a drug model. Our findings suggest that dinoflagellate-derived CNFs provide an eco-friendly platform that can be easily functionalised for various applications, including drug delivery.

Fabrication, Characterization, and Biological Evaluation of T. terrestris Incorporated Titanium-Doped ZnO/Cellulose Nanocomposite Films as a Therapeutic Hemostatic Scaffolds for Diabetic Wound Healing

The advent of biobased materials exhibiting remarkable effectiveness and performance has ushered in a paradigm shift in the field of biomedical science. Polymers are often used in the medical sector, particularly in the regeneration of bones, tissues, and wounds. Fast wound healing and self-healing polymers created from sustainable surroundings are attractive alternatives to create demand for new pathways in polymer research. This study investigates the efficacy of a biowaste-derived polymer, which was extracted and supplemented with titanium-doped ZnO nanoparticles along with medication in the form of an extract to evaluate its effectiveness in promoting wound healing. The prepared materials were further characterized using X-ray diffraction (XRD), UV-visible spectroscopy, Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), optical microscopy, atomic force microscopy (AFM), tensile, and its color parameters. In vitro studies on wound healing were also conducted. The results clearly showed that the produced substance possesses properties that are noteworthy for wound healing.

Enhanced dye sequestration with natural polysaccharides-based hydrogels: A review

Due to the expansion of industrial activities, the concentration of dyes in water has been increasing. The dire need to remove these pollutants from water has been heavily discussed. This study focuses on the reproducible and sustainable solution for wastewater treatment and dye annihilation challenges. Adsorption has been rated the most practical way of the several decolorization procedures due to its minimal initial investment, convenient utility, and high-performance caliber. Hydrogels, which are three-dimensional polymer networks, are notable because of their potential to regenerate, biodegrade, absorb bulky amounts of water, respond to stimuli, and have unique morphologies. Natural polysaccharide hydrogels are chosen over synthetic ones because they are robust, bioresorbable, non-toxic, and cheaply accessible. This study has covered six biopolymers, including chitosan, cellulose, pectin, sodium alginate, guar gum, and starch, consisting of their chemical architecture, origins, characteristics, and uses. The next part describes these polysaccharide-based hydrogels, including their manufacturing techniques, chemical alterations, and adsorption effectiveness. It is deeply evaluated how size and shape affect the adsorption rate, which has not been addressed in any prior research. To assist the readers in identifying areas for further research in this subject, limitations of these hydrogels and future views are provided in the conclusion.

Nanocellulose-based platforms as a multipurpose carrier for drug and bioactive compounds: From active packaging to transdermal and anticancer applications

The nanocellulose has unique characteristics, such as biocompatibility, good mechanical strength, and low cytotoxicity. The nanocellulose crystalline portion is responsible for good mechanical resistance, while the amorphous portion is responsible for flexibility. Such features make it a promising candidate for multiple applications related to the modulation of substance release: targeted cancer therapy, transdermal drug delivery, and controlled-release packaging materials. Thus, in this study, we discussed nanocellulose as a multipurpose material for drug delivery and bioactive compound carriers in controlled delivery systems with varied applications in pharmaceutic fields. Herein, we focus on understanding key factors such as i) polymer-drug interactions and surface modification strategies in controlled release rates, ii) therapeutic efficacy, and iii) biocompatibility aspects. The tunable chemistry surface plays a fundamental approach limiting the quick release of active substances in drug delivery systems. Several works on a pre-clinical stage of investigation were overviewed, reporting robust evidence on nanocellulose to design bioactive compounds/drug delivery carriers based on stimuli-responsive drug release and controlled delivery systems for higher efficiency in cancer therapies, purposing target therapy and reduced side effects. Nanocellulose was also identified as a solid candidate material in active packaging for pharmaceutical products. Cellulose nanocrystals and bacterial cellulose demonstrated strong potential to overcome the challenge of controlled release profile and open novel insights in advanced active packaging materials for pharmaceutics with controlled release of antioxidant and antimicrobial substances. Moreover, the concept overview in this work might be extended in active food packaging technologies to flavor-releasing/absorbing systems or antimicrobial/antioxidant carriers for extending the shelf life of foods.

Study on cellulose nanofibrils/copolymacrolactone based nano-composites with hydrophobic behaviour, self-healing ability and antioxidant activity

The multiple uses of cellulose nanofibrils (CNFs) originate from their availability from renewable resources, and are due to their physico-chemical properties, biodegradability and biocompatibility. At the same time, reducing sensitivity to humidity, increasing interfacial adhesion and hydrophobic modification of the CNF surface to diversify applications and improve operation, are current targets pursued. This study focuses on the preparation of a novel gel structure using cellulose nanofibrils (CNFs) and poly(ethylene brassylate-co-squaric acid) (PEBSA50/50), a bio-based copolymacrolactone. The primary goal is to achieve the gel with reduced sensitivity to humidity and enhanced hydrophobic behaviour. The new system was characterized in comparison to its constituent components using various techniques, such as Fourier transform infrared spectroscopy, thermal analysis, X-ray diffraction, and NIR - chemical imaging. Rheological tests demonstrated the formation of the CNF_PEBSA50/50 gel as a result of physical interactions between the two polymeric partners and revealed self-healing abilities for the prepared gels. Determination of the contact angle, surface free energy, as well as dynamic measurements of the vapour sorption of the CNF_PEBSA50/50 system, confirmed the achievement of the study's aim. Furthermore, the CNF_PEBSA50/50 network was utilized to encapsulate citric acid, resulting in the creation of a new bioactive composite with both antioxidant and antimicrobial activity.

Bacterial Cellulose Aerogels Derived from Pineapple Peel Waste for the Adsorption of Dyes

Valorization of pineapple peel waste is an attractive research topic because of the huge quantities of this byproduct generated from pineapple processing industries. In this study, the extract from pineapple waste was collected to produce a hydrogel-like form containing bacterial cellulose fibers with a three-dimensional structure and nanoscale diameter by the Acetobacter xylinum fermentation process. The bacterial cellulose suspension was subsequently activated by freeze-drying, affording lightweight aerogels as potential adsorbents in wastewater treatment, in particular the adsorptive removal of organic dyes. Intensive tests were carried out with the adsorption of methylene blue, a typical cationic dye, to investigate the influence of adsorption conditions (temperature, pH, initial dye concentration, time, and experiment scale) and aerogel-preparation parameters (grinding time and bacterial cellulose concentration). The bacterial cellulose-based aerogels exhibited high adsorption capacity not only for methylene blue but also for other cationic dyes, including malachite green, rhodamine B, and crystal violet (28-49 mg/g). However, its activity was limited for most of the anionic dyes, such as methyl orange, sunset yellow, and quinoline yellow, due to the repulsion of these anionic dyes with the aerogel surface, except for the case of congo red. It is also an anionic dye but has two amine groups providing a strong interaction with the hydroxyl group of the aerogel via hydrogen bonding. Indeed, the aerogel has a substantially large congo red-trapping capacity of 101 mg/g. Notably, the adsorption process exhibited similar performances, upscaling the solution volume to 50 times. The utilization of abundant agricultural waste in the simple aerogel preparation to produce a highly efficient and biodegradable adsorbent is the highlight of this work.

Anti-proliferative activity, molecular genetics, docking analysis, and computational calculations of uracil cellulosic aldehyde derivatives

In this study, the oxidation of microcrystalline cellulose using NaIO4 to yield the corresponding cellulose aldehyde utilized microwave irradiation as a green tool, the obtained cellulosic aldehyde was confirmed through spectral analysis and it has an active site to react with the synthesized uracil acetamide to afford the corresponding arylidene cellulosic MDAU(4), the latter compound which can easily due to presence of active CH=group behind a cyano group react with nitrogen nucleophile's and cyclized with hydrazine hydrate to give pyrazole cellulosic MDPA(5). The spectral analysis of the obtained cellulosic derivatives was confirmed with FT-IR, NMR, and SEM. Additionally, a neutral red uptake analysis has been used to investigate the cytotoxic activity of the cellulosic compounds MDAC(2), MDAU(4), and MDAP(5) against the cancer cells A549 and Caco2. After 48 h, Compound MDAU(4) had a stronger inhibitory effect on the growth of A549 and Caco2, compared to standard values. Then, using QRT-PCR, the appearance sites of the genes -Catenin, c-Myc, Cyclin D1, and MMP7 in A549 cells were examined. By reducing the expression levels of the Wnt signaling cascade genes -Catenin, c-Myc, Cyclin D1, and MMP7 when administered to A549 cells, compound MDAU(4) was shown in this investigation to be a viable candidate compared to lung cancer. Additionally, docking simulation was used to explore the uracil cellulosic heterocycles attached to different proteins, and computational investigations of these compounds looked at how well their physical characteristics matched the outcomes of their experiments.

An introductory review on advanced multifunctional materials

This review summarizes the applications of some of the advanced materials. It included the synthesis of several nanoparticles such as metal oxide nanoparticles (e.g., Fe₃O₄, ZnO, ZrOSO₄, MoO_3-x, CuO, AgFeO₂, Co₃O₄, CeO₂, SiO₂, and CuFeO₂); metal hydroxide nanosheets (e.g., Zn₅(OH)₈(NO₃)₂·2H₂O, Zn(OH)(NO₃)·H₂O, and Zn₅(OH)₈(NO₃)₂); metallic nanoparticles (Ag, Au, Pd, and Pt); carbon-based nanomaterials (graphene, graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and carbon dots (CDs)); biopolymers (cellulose, nanocellulose, TEMPO-oxidized cellulose nanofibers (TOCNFs), and chitosan); organic polymers (e.g. covalent-organic frameworks (COFs)); and hybrid materials (e.g. metal-organic frameworks (MOFs)). Most of these materials were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing, biosensing, cancer therapy, and drug delivery). They can be used as efficient adsorbents and catalysts to remove emerging contaminants e.g., inorganic (i.e., heavy metals) and organic (e.g., dyes, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation reactions such as redox reactions of pollutants. They can be used as filters for air purification by capturing carbon dioxide (CO₂) and volatile organic compounds (VOCs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH₄. Nanomedicine for some of these materials was also included being an effective agent as an antibacterial, nanocarrier for drug delivery, and probe for biosensing.

Role of Graphene Oxide in Bacterial Cellulose-Gelatin Hydrogels for Wound Dressing Applications

Biopolymer-based hydrogels have several advantages, including robust mechanical tunability, high biocompatibility, and excellent optical properties. These hydrogels can be ideal wound dressing materials and advantageous to repair and regenerate skin wounds. In this work, we prepared composite hydrogels by blending gelatin and graphene oxide-functionalized bacterial cellulose (GO-f-BC) with tetraethyl orthosilicate (TEOS). The hydrogels were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscope (AFM), and water contact angle analyses to explore functional groups and their interactions, surface morphology, and wetting behavior, respectively. The swelling, biodegradation, and water retention were tested to respond to the biofluid. Maximum swelling was exhibited by GBG-1 (0.01 mg GO amount) in all media (aqueous = 1902.83%, PBS = 1546.63%, and electrolyte = 1367.32%). All hydrogels were hemocompatible, as their hemolysis was less than 0.5%, and blood coagulation time decreased as the hydrogel concentration and GO amount increased under in vitro standard conditions. These hydrogels exhibited unusual antimicrobial activities against Gram-positive and Gram-negative bacterial strains. The cell viability and proliferation were increased with an increased GO amount, and maximum values were found for GBG-4 (0.04 mg GO amount) against fibroblast (3T3) cell lines. The mature and well-adhered cell morphology of 3T3 cells was found for all hydrogel samples. Based on all findings, these hydrogels would be a potential wound dressing skin material for wound healing applications.

Chitosan with Natural Additives as a Potential Food Packaging

Recently, the development of materials based on natural polymers have been observed. This is the result of increasing environmental degradation, as well as increased awareness and consumer expectations. Many industries, especially the packaging industry, face challenges resulting from legal regulations. Chitin is the most common biopolymer right after cellulose and is used to produce chitosan. Due to the properties of chitosan, such as non-toxicity, biocompatibility, as well as antimicrobial properties, chitosan-based materials are used in many industries. Many studies have been conducted to determine the suitability of chitosan materials as food packaging, and their advantages and limitations have been identified. Thanks to the possibility of modifying the chitosan matrix by using natural additives, it is possible to strengthen the antioxidant and antimicrobial activity of chitosan films, which means that, in the near future, chitosan-based materials will be a more environmentally friendly alternative to the plastic packaging used so far. The article presents literature data on the most commonly used natural additives, such as essential oils, plant extracts, or polysaccharides, and their effects on antimicrobial, antioxidant, mechanical, barrier, and optical properties. The application of chitosan as a natural biopolymer in food packaging extends the shelf-life of various food products while simultaneously reducing the use of synthetic plastics, which in turn will have a positive impact on the natural environment. However, further research on chitosan and its combinations with various materials is still needed to extent the application of chitosan in food packaging and bring its application to industrial levels.

Effect of Powdered Cellulose Nanofiber with Different Particle Sizes on the Physical Properties of Tablets Manufactured via Direct Compression

Direct compression is a tableting technique that involves a few steps in non-demanding manufacturing conditions. High strength and rapid disintegration of tablet formulations were previously achieved through the addition of cellulose nanofibers (CNFs), which have recently attracted attention as a high-performance biomass material. However, CNF addition results in greater variation in tablet weight and drug content, potentially due to differences in particle size between CNF and other additives. Herein, we used pulverized CNF to evaluate the effect of CNF particle size on the variation in tablet weight and drug content. Tablet formulations consisted of CNF with different particle sizes (approximately 100 µm [CNF100] and 300 µm [CNF300], at 0, 10, 30, or 50%), lactose hydrate, acetaminophen, and magnesium stearate. Ten powder formulations with different particle sizes and CNF concentrations were prepared; thereafter, the tablets were produced using a rotary tableting press with a compression force of 10 kN. The variation in weight and drug content as well as the tensile strength, friability, disintegration time, and drug dissolution of tablets were evaluated. CNF100 addition to the tablets reduced the weight and drug content variation to a greater extent than CNF300 addition. Using CNF300, we produced tablets of sufficient strength and short disintegration time. These properties were also achieved with CNF100 addition. Our findings suggest that adding CNF of small particle size to the tablet formulation can reduce the variation in weight and drug content while maintaining high strength and short disintegration time.

Cellulose and protein nanofibrils: Singular biobased nanostructures for the design of sustainable advanced materials

Polysaccharides and proteins are extensively used for the design of advanced sustainable materials. Owing to the high aspect ratio and specific surface area, ease of modification, high mechanical strength and thermal stability, renewability, and biodegradability, biopolymeric nanofibrils are gaining growing popularity amongst the catalog of nanostructures exploited in a panoply of fields. These include the nanocomposites, paper and packaging, environmental remediation, electronics, energy, and biomedical applications. In this review, recent trends on the use of cellulose and protein nanofibrils as versatile substrates for the design of high-performance nanomaterials are assessed. A concise description of the preparation methodologies and characteristics of cellulosic nanofibrils, namely nanofibrillated cellulose (NFC), bacterial nanocellulose (BNC), and protein nanofibrils is presented. Furthermore, the use of these nanofibrils in the production of sustainable materials, such as membranes, films, and patches, amongst others, as well as their major domains of application, are briefly described, with focus on the works carried out at the BioPol4Fun Research Group (Innovation in BioPolymer based Functional Materials and Bioactive Compounds) from the Portuguese associate laboratory CICECO-Aveiro Institute of Materials (University of Aveiro). The potential for partnership between both types of nanofibrils in advanced material development is also reviewed. Finally, the critical challenges and opportunities for these biobased nanostructures for the development of functional materials are addressed.

Cellulose Nanocrystals (CNCs) and Its Modified Form from Durian Rind as Dexamethasone Carrier

In this study, CNCs were extracted from durian rind. Modification to CNCs with saponin was conducted at 50 °C for one h. CNCs and CNCs-saponin were employed as dexamethasone carriers. Modification to CNCs using saponin did not change the relative crystallinity of CNCs. CNCs' molecular structure and surface chemistry did not alter significantly after modification. Both nanoparticles have surface charges independently of pH. Dexamethasone-released kinetics were studied at two different pH (7.4 and 5.8). Higuchi, Ritger-Peppas, first-order kinetic and sigmoidal equations were used to represent the released kinetic data. The sigmoidal equation was found to be superior to other models. The CNCs and CNCs-saponin showed burst release at 30 min. The study indicated that cell viability decreased by 30% after modification with saponin.

Toxicological Assessment of Cellulose Nanomaterials: Oral Exposure

Cellulose nanomaterials (CNMs) have emerged recently as an important group of sustainable bio-based nanomaterials (NMs) with potential applications in multiple sectors, including the food, food packaging, and biomedical fields. The widening of these applications leads to increased human oral exposure to these NMs and, potentially, to adverse health outcomes. Presently, the potential hazards regarding oral exposure to CNMs are insufficiently characterised. There is a need to understand and manage the potential adverse effects that might result from the ingestion of CNMs before products using CNMs reach commercialisation. This work reviews the potential applications of CNMs in the food and biomedical sectors along with the existing toxicological in vitro and in vivo studies, while also identifying current knowledge gaps. Relevant considerations when performing toxicological studies following oral exposure to CNMs are highlighted. An increasing number of studies have been published in the last years, overall showing that ingested CNMs are not toxic to the gastrointestinal tract (GIT), suggestive of the biocompatibility of the majority of the tested CNMs. However, in vitro and in vivo genotoxicity studies, as well as long-term carcinogenic or reproductive toxicity studies, are not yet available. These studies are needed to support a wider use of CNMs in applications that can lead to human oral ingestion, thereby promoting a safe and sustainable-by-design approach.

Isolation and Characterization of Cellulose Nanocrystals from Date Palm Waste

This study presents the isolation, characterization, and kinetic analyses of cellulose nanocrystals (CNCs) from date palm waste in the United Arab Emirates. After bleaching date palm stem waste with acidified NaClO₂ and delignification via NaOH treatments, cellulose was extracted. Mineral acid hydrolysis (62 wt % H₂SO₄) was performed at 45 °C for 45 min to produce crystalline nanocellulose. Fourier transform infrared (FTIR) and chemical composition analysis confirmed the removal of noncellulosic constituents. The crystallinity index increased gradually with chemical treatments, according to the obtained X-ray diffraction (XRD) results. Thermogravimetric analysis and differential scanning calorimetry results revealed that the CNC has high thermal stability. The Coats-Redfern method was used to determine the kinetic parameters. The kinetic analysis confirmed that CNC has more activation energy than cellulose and thus confirms its compact and resistive crystalline structure. This has been attributable to the stronger hydrogen bonding in CNC crystalline domains than that in cellulose crystalline domains. Scanning electron microscopy revealed that lignin and hemicellulose were eliminated after chemical pretreatments, and CNC with a rodlike shape was obtained after hydrolysis. Moreover, transmission electron microscopy confirmed the nanoscale of crystalline cellulose. ζ potential analysis indicated that the CNC afforded a stable suspension (-29.27 mV), which is less prone to flocculation. Kinetic analyses of cellulose and cellulose nanocrystals isolated from date palm waste are useful for making composites and designing selective pyrolysis reactors.

Cellulose-Based Nanomaterials Advance Biomedicine: A Review

There are various biomaterials, but none fulfills all requirements. Cellulose biopolymers have advanced biomedicine to satisfy high market demand and circumvent many ecological concerns. This review aims to present an overview of cellulose knowledge and technical biomedical applications such as antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration. It includes an extensive bibliography of recent research findings from fundamental and applied investigations. Cellulose-based materials are tailorable to obtain suitable chemical, mechanical, and physical properties required for biomedical applications. The chemical structure of cellulose allows modifications and simple conjugation with several materials, including nanoparticles, without tedious efforts. They render the applications cheap, biocompatible, biodegradable, and easy to shape and process.

Fluorescence Labeling of Cellulose Nanocrystals—A Facile and Green Synthesis Route

Efficient chemical modification of cellulose nanocrystals (CNCs) by grafting commonly involves aprotic solvents, toxic reactants, harsh reaction conditions, or catalysts, which have negative effects on the particle character, reduced dispersibility and requires further purification, if products are intended for biomedical applications. This work, in contrast, presents a robust, facile, and green synthesis protocol for the grafting of an amino-reactive fluorophore like fluorescein isothiocyanate (FITC) on aqueous CNCs, combining and modifying existent approaches in a two-step procedure. Comparably high grafting yields were achieved, which were confirmed by thermogravimetry, FTIR, and photometry. The dispersive properties were confirmed by DLS, AF4-MALS, and TEM studies. The presented route is highly suitable for the introduction of silane-bound organic groups and offers a versatile platform for further modification routes of cellulose-based substrates.

Engineered Superabsorbent Nanocomposite Reinforced with Cellulose Nanocrystals for Remediation of Basic Dyes: Isotherm, Kinetic, and Thermodynamic Studies

In this study, cellulose nanocrystals (CNCs) were produced from pea peels by acid hydrolysis to be used with pectin and acrylic acid (AAc) to form Pectin-PAAc/CNC nanocomposite by γ-irradiation. The structure, morphology, and properties of the nanocomposite were investigated using Fourier transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM) techniques. The nanocomposite hydrogel was used for the removal of methylene blue dye (MB) from wastewater. The results revealed that the presence of CNCs in the polymeric matrix enhances the swelling and adsorption properties of Pectin-PAAc/CNC. The optimum adsorbate concentration is 70 mg/L. The kinetic experimental data were fit by pseudo-first-order (PFO), pseudo-second-order (PSO), and Avrami (Avr) kinetic models. It was found that the kinetic models fit the adsorption of MB well where the correlation coefficients of all kinetic models are higher than 0.97. The Avr kinetic model has the lowest ∆qe (normalized standard deviation) value, making it the most suitable one for describing the adsorption kinetics. The adsorption isotherm of MB by Pectin-PAAc follows the Brouers-Sotolongo model while that by Pectin-PAAc/CNC follows the Langmuir isotherm model. The negative values of ∆G confirmed the spontaneous nature of adsorption, and the positive value of ∆H indicated the endothermic nature of the adsorption.

Encapsulation of Gemor Bark Extract Using Cetyltrimethylammonium bromide-Modified Nanocellulose

Gemor (Nothaphoebe coriacea) is one of the plants of Non-Timber Forest Product typical of wetlands with secondary metabolite compounds such as alkaloids, steroids, flavonoids, triterpenoids, and phenolics. Besides being used as an insecticide, gemor bark also has antioxidant activities, anti-influenza, antivirus, antiherpes, and anti-inflammatory. This study aimed to encapsulate gemor bark extract using cetyltrimethylammonium bromide (CTAB)-modified nanocellulose to increase the effectiveness of its use. The result showed that gemor bark extract had an IC50 value of 39.97 ppm. In comparison, encapsulated gemor bark extract (Gemor-Nc-4 mM CTAB) had an excellent antioxidant activity with an IC50 value of 98.41 ppm and encapsulation efficiency of 53.70 %.

Orally Disintegrating Tablet Manufacture via Direct Powder Compression Using Cellulose Nanofiber as a Functional Additive

In recent years, orally disintegrating (OD) tablets have been continuously improved to increase efficacy. Herein, we focused on the benefits of cellulose nanofiber (CNF), a highly functional material, in OD tablet manufacturing. We studied its effects on the physical properties of tablets during manufacture. The analyzed tablet formulations included different content CNF (0-50%; 6 preparations), lactose hydrate, acetaminophen, and magnesium stearate (Mg-St). We measured the angles of repose and evaluated the flowability of the powder. Tablets were prepared on a tabletop and rotary tableting presses, whereafter their weight, drug content, hardness, friability, and disintegration time were evaluated. Although CNF addition slightly reduced powder flowability, continuous tableting was feasible via direct powder compression. Tablet hardness (~40 N) was comparable between CNF-containing (20%) tablets and those prepared with crystalline cellulose under 10 kN compression force. Disintegration time (~30 s) was similar between CNF-supplemented tablets and those supplemented with low-substituted hydroxypropyl cellulose, crospovidone, or croscarmellose sodium. At higher CNF fractions, tablet hardness increased, while friability decreased. Adding ≥30% CNF prolonged the tablet disintegration time. To set the optimized manufacturing condition for ensuring the desired tablet physical properties, we created contour plots for evaluating the effects of CNF concentration and compression force on hardness and disintegration time. A CNF concentration of 10-20% and a compression force of 12-13 kN would allow for the preparation of tablets with a hardness ≥30 N and a disintegration time ≤60 s. Altogether, addition of CNF to the OD tablet formulation for direct powder compression enhanced hardness and disintegration.

Nanocellulose from Agricultural Wastes: Products and Applications—A Review

The isolation of nanocellulose from different agricultural residues is becoming an important research field due to its versatile applications. This work collects different production processes, including conditioning steps, pretreatments, bleaching processes and finally purification for the production of nanocellulose in its main types of morphologies: cellulose nanofiber (CNF) and cellulose nanocrystal (CNC). This review highlights the importance of agricultural wastes in the production of nanocellulose in order to reduce environmental impact, use of fossil resources, guarantee sustainable economic growth and close the circle of resource use. Finally, the possible applications of the nanocellulose obtained as a new source of raw material in various industrial fields are discussed.

TEMPO-oxidised nanocellulose hydrogels and self-standing films derived from bacterial cellulose nanopaper

Hydrogels derived from TEMPO-oxidised cellulose nanofibrils (TOCNs) are not robust and inherently water unstable if the TOCNs are not crosslinked or coated with a water-swellable polymer. Furthermore, the manufacturing of self-standing TOCN films is still a challenge due to the small TOCN diameter and the viscosifying effect of TOCNs. Here, we report the TEMPO-mediated oxidation of bacterial cellulose (BC) nanopaper as a route to produce robust and water stable TOCN hydrogels without the need of additional additives or crosslinking steps. Pristine BC pellicle was first press-dried into a dried and well-consolidated BC nanopaper, followed by TEMPO-oxidation at various NaClO concentrations. The oxidation reaction introduced carboxylate moieties onto the exposed BC nanofibrils within the nanopaper network structure. This then led to the expansion and swelling of the nanopaper into a hydrogel. A swelling ratio of up to 100 times the original thickness of the BC nanopaper was observed upon TEMPO-oxidation. The water retention value of the TEMPO-oxidised BC hydrogels was also found to increase with increasing carboxylate content. These TEMPO-oxidised BC hydrogels were found to be robust and water-stable, even under prolonged (>1 month) magnetic stirring in water. We further showed that high grammage self-standing TOCN films (100 g m-2) can be fabricated as simple as press-drying these water stable TEMPO-oxidised BC hydrogels without the need of vacuum-assisted filtration or slow-drying, which is typically the rate-limiting step in the manufacturing of TOCN films.

Advanced Functional Materials Based on Nanocellulose for Pharmaceutical/Medical Applications

Nanocelluloses (NCs), with their remarkable characteristics, have proven to be one of the most promising "green" materials of our times and have received special attention from researchers in nanomaterials. A diversity of new functional materials with a wide range of biomedical applications has been designed based on the most desirable properties of NCs, such as biocompatibility, biodegradability, and their special physicochemical properties. In this context and under the pressure of rapid development of this field, it is imperative to synthesize the successes and the new requirements in a comprehensive review. The first part of this work provides a brief review of the characteristics of the NCs (cellulose nanocrystals-CNC, cellulose nanofibrils-CNF, and bacterial nanocellulose-BNC), as well as of the main functional materials based on NCs (hydrogels, nanogels, and nanocomposites). The second part presents an extensive review of research over the past five years on promising pharmaceutical and medical applications of nanocellulose-based materials, which have been discussed in three important areas: drug-delivery systems, materials for wound-healing applications, as well as tissue engineering. Finally, an in-depth assessment of the in vitro and in vivo cytotoxicity of NCs-based materials, as well as the challenges related to their biodegradability, is performed.