Non-covalent and covalent immobilization of Candida antarctica lipase B on chemically modified multiwalled carbon nanotubes for a green acylation process in supercritical CO2

Surface Engineering of Superparamagnetic Graphene Oxide Nanosheet as a Chemically Tunable Platform for Facial Biofuel Production by Lipase

In this research, we utilized an efficient approach to synthesize superparamagnetic graphene oxide (SPGO) rapidly in a one-pot method using microwave irradiation of graphene oxide (GO), urea, and Fe(III) ion. Tannic acid (TA) was introduced to the surface of SPGO through a straightforward and eco-friendly process. Methods were devised to furnish GO nanosheets and modify their surfaces with TA in an environmentally friendly manner. Two series of nanosheets, namely, SPGO/TA-COOH and SPGO/TA-IM, were engineered on the surface and used for immobilizing lipase enzyme. Through various analytical tools, the unique biocatalysts SPGO/TA-COOH/L and SPGO/TA-IM/L were confirmed. These biocatalysts exhibited enhanced stability at high temperatures and pH levels compared with free lipase. They also demonstrated prolonged storage stability and reusability over four months and seven cycles, respectively. Furthermore, the catalytic activity of immobilized lipase showed minimal impairment based on kinetic behavior analysis. The kinetic constants of SPGO/TA-IM/L were determined as Vmax = 0.24 mM min-1, Km = 0.224 mM, and kcat = 0.8 s-1. Additionally, the efficiency of biocatalysts for biodiesel production from palmitic acid was studied, focusing on various reaction parameters, such as temperature, alcohol to palmitic acid molar ratio, water content, and lipase quantity. The esterification reaction of palmitic acid with methanol, ethanol, and isopropanol was tested in the presence of SPGO/TA-COOH/L and SPGO/TA-IM/L, and the corresponding esters were obtained with a yield of 30.6-91.6%.

Electrochemical Sensors Based on Self-Assembling Peptide/Carbon Nanotube Nanocomposites for Sensitive Detection of Bisphenol A

In this study, a cationic amphiphilic self-assembling peptide (SAP) Z23 was designed, and a simple bisphenol a (BPA) sensor, based on SAP Z23/multiwalled carbon nanotubes (Z23/MWCNTs) composite, was successfully fabricated on the surface of a glassy carbon electrode (GCE). The composite material was formed by π-π stacking interaction between the aromatic group on the hydrophobic side of Z23 and the side-wall of MWCNTs, with the charged hydrophilic group of Z23 exposed. During the electrocatalytic process of BPA, a synergistic effect was observed between Z23 and MWCNTs. The current response of the sensor based on composite material was 3.24 times that of the MWCNTs-modified electrode, which was much higher than that of the peptide-based electrode. Differential pulse voltammetry (DPV) was used to optimize the experimental conditions affecting the analytical performance of the modified electrode. Under optimal conditions, the linear range of the sensor was from 10 nM to 100 μM by amperometric measurement with sensitivity and limit of detection (LOD) at 6.569 μAμM-1cm-2 and 1.28 nM (S/N = 3), respectively. Consequently, the sensor has excellent electrochemical performance and is easy to fabricate, making it a good prospect in the field of electrochemical detection in the future.

Carbon-Based Nanostructures as Emerging Materials for Gene Delivery Applications

Gene therapeutics are promising for treating diseases at the genetic level, with some already validated for clinical use. Recently, nanostructures have emerged for the targeted delivery of genetic material. Nanomaterials, exhibiting advantageous properties such as a high surface-to-volume ratio, biocompatibility, facile functionalization, substantial loading capacity, and tunable physicochemical characteristics, are recognized as non-viral vectors in gene therapy applications. Despite progress, current non-viral vectors exhibit notably low gene delivery efficiency. Progress in nanotechnology is essential to overcome extracellular and intracellular barriers in gene delivery. Specific nanostructures such as carbon nanotubes (CNTs), carbon quantum dots (CQDs), nanodiamonds (NDs), and similar carbon-based structures can accommodate diverse genetic materials such as plasmid DNA (pDNA), messenger RNA (mRNA), small interference RNA (siRNA), micro RNA (miRNA), and antisense oligonucleotides (AONs). To address challenges such as high toxicity and low transfection efficiency, advancements in the features of carbon-based nanostructures (CBNs) are imperative. This overview delves into three types of CBNs employed as vectors in drug/gene delivery systems, encompassing their synthesis methods, properties, and biomedical applications. Ultimately, we present insights into the opportunities and challenges within the captivating realm of gene delivery using CBNs.

Enzyme-linked carbon nanotubes as biocatalytic tools to degrade and mitigate environmental pollutants

A wide array of organic compounds have been recognized as pollutants of high concern due to their controlled or uncontrolled presence in environmental matrices. The persistent prevalence of diverse organic pollutants, including pharmaceutical compounds, phenolic compounds, synthetic dyes, and other hazardous substances, necessitates robust measures for their practical and sustainable removal from water bodies. Several bioremediation and biodegradation methods have been invented and deployed, with a wide range of materials well-suited for diverse environments. Enzyme-linked carbon-based materials have been considered efficient biocatalytic platforms for the remediation of complex organic pollutants, mostly showing over 80% removal efficiency of micropollutants. The advantages of enzyme-linked carbon nanotubes (CNTs) in enzyme immobilization and improved catalytic potential may thus be advantageous for environmental research considering the current need for pollutant removal. This review outlines the perspective of current remediation approaches and highlights the advantageous features of enzyme-linked CNTs in the removal of pollutants, emphasizing their reusability and stability aspects. Furthermore, different applications of enzyme-linked CNTs in environmental research with concluding remarks and future outlooks have been highlighted. Enzyme-linked CNTs serve as a robust biocatalytic platform for the sustainability agenda with the aim of keeping the environment clean and safe from a variety of organic pollutants.

Microbial cellulase production and stability investigations via graphene like carbon nanostructure derived from paddy straw

Cellulases are among the most in-demand bioprocess enzymes, and the high cost of production, combined with their low enzymatic activity, is the main constraint, particularly in the biofuels industry. As a result, low-cost enzyme production modes with high activity and stability have emerged as the primary focus of research. Here, a method for producing a graphene like carbon nanostructure (GLCNs) has been investigated utilizing paddy straw (Ps), and its physicochemical characteristics have been examined using a variety of techniques including XRD, FT-IR, SEM and TEM. Further, the pretreatment of Ps feedstock for cellulase production was done using diluted waste KOH liquid collected during the preparation of the GLCNs. To increase the production and stability of the enzyme, newly prepared GLCNs is utilized as a nanocatalyst. Using 15 mg of GLCNs, 35 IU/gds FP activity was seen after 72 h, followed by 158 IU/gds EG and 114 IU/gds BGL activity in 96 h. This nanocatalyst supported enzyme was thermally stable at 70 °C up to 15 h and exhibited stability at pH 7.0 for 10 h by holding 66 % of its half-life.

A comprehensive review on bio-mimicked multimolecular frameworks and supramolecules as scaffolds for enzyme immobilization

Immobilization depicts a propitious route to optimize the catalytic performances, efficient recovery, minimizing autocatalysis, and also augment the stabilities of enzymes, particularly in unnatural environments. In this opinion, supramolecules and multimolecular frameworks have captivated immense attention to achieve profound controllable interactions between enzyme molecules and well-defined natural or synthetic architectures to yield protein bioconjugates with high accessibility for substrate binding and enhanced enantioselectivities. This scholastic review emphasizes the possibilities of associating multimolecular complexes with biological entities via several types of interactions, namely covalent interactions, host-guest complexation, π - π ${\rm{\pi }}-{\rm{\pi }}$ interactions, intra/inter hydrogen bondings, electrostatic interactions, and so forth offers remarkable applications for the modulations of enzymes. The potential synergies between artificial supramolecular structures and biological systems are the primary concern of this pedagogical review. The majority of the research primarily focused on the dynamic biomolecule-responsive supramolecular assemblages and multimolecular architectures as ideal platforms for the recognition and modulation of proteins and cells. Embracing sustainable green demeanors of enzyme immobilizations in a quest to reinforce site-selectivity, catalytic efficiency, and structural integrality of enzymes are the contemporary requirements of the biotechnological sectors that instigate the development of novel biocatalytic systems.

An overview on the conversion of glycerol to value-added industrial products via chemical and biochemical routes

Glycerol is a common by-product of industrial biodiesel syntheses. Due to its properties, availability, and versatility, residual glycerol can be used as a raw material in the production of high value-added industrial inputs and outputs. In particular, products like hydrogen, propylene glycol, acrolein, epichlorohydrin, dioxalane and dioxane, glycerol carbonate, n-butanol, citric acid, ethanol, butanol, propionic acid, (mono-, di-, and triacylglycerols), cynamoil esters, glycerol acetate, benzoic acid, and other applications. In this context, the present study presents a critical evaluation of the innovative technologies based on the use of residual glycerol in different industries, including the pharmaceutical, textile, food, cosmetic, and energy sectors. Chemical and biochemical catalysts in the transformation of residual glycerol are explored, along with the factors to be considered regarding the choice of catalyst route used in the conversion process, aiming at improving the production of these industrial products.

Biocatalytic asymmetric synthesis of secondary allylic alcohols using Burkholderia cepacia lipase immobilized on multiwalled carbon nanotubes

The lipase from Burkholderia cepacia (BCL) was immobilized through physical adsorption on pristine and functionalized multiwalled carbon nanotubes (MWCNTs) with carboxyl or amine groups and used in the stereoselective acylation of (R,S)-1-octen-3-ol (1) and (R,S)-(E)-4-phenyl-3-buten-2-ol (4) with vinyl acetate. All immobilized preparations produced better results than free BCL. For (R,S)-4, 50% conversion and E > 200 were obtained in n-hexane or in solvent-free medium. For (R,S)-1, in solvent-free medium, the conversion was 38% with a slight increase in the E-value (E = 10).

Facile Cellulase Immobilisation on Bioinspired Silica

Cellulases are enzymes with great potential for converting biomass to biofuels for sustainable energy. However, their commercial use is limited by their costs and low reusability. Therefore, the scientific and industrial sectors are focusing on finding better strategies to reuse enzymes and improve their performance. In this work, cellulase from Aspergillus niger was immobilised through in situ entrapment and adsorption on bio-inspired silica (BIS) supports. To the best of our knowledge, this green effect strategy has never been applied for cellulase into BIS. In situ entrapment was performed during support synthesis, applying a one-pot approach at mild conditions (room temperature, pH 7, and water solvent), while adsorption was performed after support formation. The loading efficiency was investigated on different immobilisation systems by Bradford assay and FTIR. Bovine serum albumin (BSA) was chosen as a control to optimize cellulase loading. The residual activity of cellulase was analysed by the dinitro salicylic acid (DNS) method. Activity of 90% was observed for the entrapped enzyme, while activity of ~55% was observed for the adsorbed enzyme. Moreover, the supported enzyme systems were recycled five times to evaluate their reuse potential. The thermal and pH stability tests suggested that both entrapment and adsorption strategies can increase enzyme activity. The results highlight that the entrapment in BIS is a potentially useful strategy to easily immobilise enzymes, while preserving their stability and recycle potential.

Modern Carbon-Based Materials for Adsorptive Removal of Organic and Inorganic Pollutants from Water and Wastewater

Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Cross-linked tannase-carbon nanotubes composite in elevating antioxidative potential of green tea extract

Multi-walled carbon nanotubes (MWCNT)-tannase composite was investigated as an immobilized biocatalyst on the basis of its facile preparation, low cost, and excellent aqueous dispersibility. Cross-linked tannase enzymes, obtained in the presence of glutaraldehyde, were composited with MWCNT via physical adsorption. Multiple techniques were applied to investigate, and corroborate the successful adsorption of cross-linked tannase onto the MWCNT structure. Green tea infusion extract post-treatment using the composite preparation showed elevated radical scavenging activities relative to the control. Green tea infusion extract exhibited a markedly reduced EC₅₀ value on 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals following its treatment with the enzyme composite, which represents 20%-34% enhancement in its free radical scavenging capacity. Stoichiometry and number of reduced DPPH were determined and compared. The antioxidative potential of a widely consumed, health-beneficial green tea is elevated by the treatment with MWCNT-tannase composite. PRACTICAL APPLICATIONS: Cross-linked tannase enzymes were composited with pristine multi-walled carbon nanotubes via simple physical adsorption. The composite presents key advantages such as low specific volume compared to other well-known immobilization media, inert, facile enzyme composition, and ease of recovery for repeated use. The work demonstrated carbon nanotube prosthetic utility in the biotransformation of food-based health commodity sought after for its nutritional benefits. The approach is of both industrial- and agricultural importance, and is a promising and viable strategy to obtain a natural, functional food supplement for the multi-billion dollar well-being and health-related industries.

Optimization of immobilization of Pseudomonas cepacia lipase on multiwalled carbon nanotubes functionalized with glycyrrhizin and Tween 80

In the present study, multiwalled carbon nanotubes (MWCNTs) were functionalized with glycyrrhizin and Tween 80 and applied for immobilization of Pseudomonas cepacia lipase (PcL). Characterization of f-MWCNTs was performed through Fourier-transform infrared spectroscopy, thermal gravimetric, field emission scanning electron microscopy, and energy-dispersive X-ray spectroscopy analysis. The optimum specific activity of immobilized PcL (studied by Plackett-Burman statistical design) occurred at 0.3 mg/mL of f-MWCNTs, 25 mM of phosphate buffer (pH 6.0), 15 min sonication time, 8 U/mL of enzyme concentration, and 24 h immobilization time at 4 °C in the absence of glutaraldehyde. In these conditions, the specific activity was 16.57 ± 0.71 U/mg, which was very close to the predicted amount (16.62 ± 0.64 U/mg). The results of thermal and pH stability showed that the stability of immobilized PcL was higher than that of the free PcL. The activity of immobilized PcL on f-MWCNTs held 93% after being incubated for 60 min at 70 °C. Moreover, the immobilized PcL on f-MWCNTs retained about 65% of its initial activity after 30 days of storage at 25 °C. In addition, about 50% of initial activity of immobilized PcL retained after 10 cycles of uses. Therefore, f-MWCNTs could be introduced as suitable support for enzymes immobilization.

A lipase-based chiral stationary phase for direct chiral separation in capillary electrochromatography

Candida antarctica lipase B (CALB) is a natural biocatalyst with an intrinsically strong chiral environment and a high degree of enantio-selectivity, which is widely used in the separation of racemates. Here, a facile and efficient covalent immobilization approach was utilized to immobilize CALB onto the capillary inner wall as a novel chiral stationary phase to explore and broaden its application in the direct chiral separation by electrochromatography. The obtained CALB immobilized capillary column was characterized by scanning electron microscopy (SEM), fluorescence imaging and Fourier transform infrared spectroscopy (FT-IR). The enantioseparation property of the CALB immobilized capillary column was confirmed by direct chiral separation of several pairs of monoamine neurotransmitter enantiomers in OT-CEC mode. Outstanding enantioseparation performance for three types of monoamine neurotransmitter enantiomers including epinephrine, norepinephrine and phenylephrine was obtained by the CALB immobilized column. Thanks to the effectiveness of covalent bonding method and the intrinsic stability of CALB, the prepared CALB immobilized capillary columns were quite steady and reproducible. The relative standard deviations for retention times of the enantiomers were as follows: for intra-day (n = 5) runs (≤0.25%), inter-day (n = 3) runs (≤0.72%) and between-columns (n = 3) (≤2.42%). After 90 consecutive runs in CEC mode, the CALB immobilized column still exhibited desirable enantionseparation performance.

Trends in the development of innovative nanobiocatalysts and their application in biocatalytic transformations

The ever-growing demand for cost-effective and innocuous biocatalytic transformations has prompted the rational design and development of robust biocatalytic tools. Enzyme immobilization technology lies in the formation of cooperative interactions between the tailored surface of the support and the enzyme of choice, which result in the fabrication of tremendous biocatalytic tools with desirable properties, complying with the current demands even on an industrial level. Different nanoscale materials (organic, inorganic, and green) have attracted great attention as immobilization matrices for single or multi-enzymatic systems. Aiming to unveil the potentialities of nanobiocatalytic systems, we present distinct immobilization strategies and give a thorough insight into the effect of nanosupports specific properties on the biocatalysts' structure and catalytic performance. We also highlight the development of nanobiocatalysts for their incorporation in cascade enzymatic processes and various types of batch and continuous-flow reactor systems. Remarkable emphasis is given on the application of such nanobiocatalytic tools in several biocatalytic transformations including bioremediation processes, biofuel production, and synthesis of bioactive compounds and fine chemicals for the food and pharmaceutical industry.

Immobilized lipases-based nano-biocatalytic systems - A versatile platform with incredible biotechnological potential

Lipases belong to α/β hydrolases that cause hydrolytic catalysis of triacylglycerols to release monoacylglycerols, diacylglycerols, and glycerol with free fatty acids. Lipases have a common active site that contains three amino acid residues in a conserved Gly-X-Ser-X-Gly motif: a nucleophilic serine residue, an acidic aspartic or glutamic acid residue, and a basic histidine residue. Lipase plays a significant role in numerous industrial and biotechnological processes, including paper, food, oleochemical and pharmaceutical applications. However, its instability and aqueous solubility make application expensive and relatively challenging. Immobilization has been considered as a promising approach to improve enzyme stability, reusability, and survival under extreme temperature and pH environments. Innumerable supporting material in the form of natural polymers and nanostructured materials is a crucial aspect in the procedure of lipase immobilization used to afford biocompatibility, stability in physio-chemical belongings, and profuse binding positions for enzymes. This review outlines the unique structural and functional properties of a large number of polymers and nanomaterials as robust support matrices for lipase immobilization. Given these supporting materials, the applications of immobilized lipases in different industries, such as biodiesel production, polymer synthesis, additives, detergent, textile, and food industry are also discussed.

Nanobiocatalysts for Biodiesel Synthesis through Transesterification—A Review

Converting useless feedstock into biodiesel by utilizing the process of transesterification has been regarded as an alternative approach recently used to address the fuel and energy resources shortage issues. Nanobiocatalysts (NBCs), containing the biological component of lipase enzyme immobilized on nanomaterials (NMs), have also been presented as an advanced catalyst to effectively carry out the process of transesterification with appreciable yields. This study highlights the fundamentals associated with NBCs and the transesterification reaction catalyzed by NBCs for summarizing present academic literature reported in this research domain in recent years. Classification of the NBCs with respect to the nature of NMs and immobilization methods of lipase enzyme is also provided for organizing the recently documented case studies. This review is designed to act as a guideline for the researchers aiming to explore this domain of biodiesel production via NBCs as well as for the scholars looking to expand on this field.

Hierarchical Gold Mesoflowers in Enzyme Engineering: An Environmentally Friendly Strategy for the Enhanced Enzymatic Performance and Biodiesel Production

To expand the field of nanomaterial and engineering of enzyme in eco-friendly processes, gold mesoflower (Au-MF) nanostructure was applied for preparation of three series of immobilized lipase (Au-MF/SAM 1-3) through biofunctionalization of surface by Ugi multicomponent reaction. The synthesized Au-MF/SAM 1-3/lipase as unique biocatalysts was confirmed by different analytical tools and techniques. Compared to the free lipase, the Au-MF/SAM 1-3/lipase showed more stability at high temperature and pH. Also, these biocatalysts showed high storage stability and reusability after 2 months and eight cycles, respectively. Moreover, the kinetic behavior was investigated and the results showed a minimal impairment of catalytic activity of immobilized lipase. The kinetic constants of the immobilized lipase, Au-MF/SAM 2/lipase, are K_m = 0.37 mM, V_max = 0.22 mM min^-1, and k_cat = 154 min^-1. The immobilized lipase showed smaller activation energy (E_a) than that of free enzyme, indicating that the immobilized enzyme is less sensitive to temperature. In the following, the biodiesel production from palmitic acid was studied in the presence of Au-MF/SAM 2/lipase as an efficient biocatalyst. The influence of different reaction parameters such as temperature, molar ratio of alcohol to palmitic acid, water content, and lipase amount was deeply investigated.

Lipase@zeolitic imidazolate framework ZIF-90: A highly stable and recyclable biocatalyst for the synthesis of fruity banana flavour

A zeolitic imidazolate framework (ZIF-90) has been synthesized through solvothermal method. The structure was characterized by means of FT-IR spectroscopy, X-ray diffraction, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM)/energy dispersive X-ray spectroscopy (EDS). The synthesized ZIF-90 was applied as a support for immobilization of porcine pancreatic lipase (PPL). The immobilized enzyme (PPL@ZIF-90) exhibited immobilization yield and efficiency of 66 ± 1.8% and 89 ± 1.4%, respectively. The pH and thermal stability of PPL was improved after immobilization and the initial activity was retained at about 57% after 20 days of storage at 4 °C for PPL@ZIF-90. Moreover, about 57% of the original activity was remained following 10 cycles of application. In Michaelis-Menten kinetic studies, K_m value for PPL@ZIF-90 was lower, while, the V_max was higher than free PPL. Moreover, optimized conditions to produce fruity banana flavour upon esterification of butyric acid were investigated. The optimum esterification yield was 73.79 ± 1.31% in the presence of 245 mg PPL@ZIF-90, alcohol/acid ratio of 2.78 and 39 h reaction time. PPL@ZIF-90 showed 39% relative esterification yield after six cycles of reuse. The results suggested that PPL@ZIF-90 can be used as a potential effective biocatalyst for synthesis of isoamyl butyrate.