Elucidation of the defence mechanism in microalgae Chlorella sorokiniana under mercury exposure. Identification of Hg–phytochelatins

Phycoremediation of As(III) and Cr(VI) by Desmodesmus subspicatus: Impact on growth and biomolecules (carbohydrate, protein, chlorophyll and lipid) - A dual mode investigation

Microalgae are under research focus for the simultaneous production of biomolecules (e.g., carbohydrates, proteins, pigments and lipids) and bioremediation of toxic substances from wastewater. The current study explores the capability of indigenously isolated microalgae (Desmodesmus subspicatus) for the phycoremediation of As(III) and Cr(VI). Variation of biomolecules (carbohydrate, protein, lipid and chlorophyll) was investigated during phycoremediation. D. subspicatus survived up to the toxicity level of 10 mg/L for As(III) and 0.8 mg/L for Cr(VI). A 70% decline in carbohydrate accumulation was observed at 10 mg/L of As(III). An increased content of proteins (+ 28%) and lipids (+ 32%) within the cells was observed while growing in 0.5 and 0.2 mg/L of As(III) and Cr(VI) respectively. A decrease in carbohydrate accumulation was noted with increasing Cr(VI) concentration, and the lowest (- 44%) was recorded at 0.8 mg/L Cr(VI). D. subspicatus showed an excellent maximum removal efficiency for Cr(VI) and As(III) as 77% and 90% respectively.

Ensuring carbon neutrality via algae-based wastewater treatment systems: Progress and future perspectives

The emergence of algal biorefineries has garnered considerable attention to researchers owing to their potential to ensure carbon neutrality via mitigation of atmospheric greenhouse gases. Algae-derived biofuels, characterized by their carbon-neutral nature, stand poised to play a pivotal role in advancing sustainable development initiatives aimed at enhancing environmental and societal well-being. In this context, algae-based wastewater treatment systems are greatly appreciated for their efficacy in nutrient removal and simultaneous bioenergy generation. These systems leverage the growth of algae species on wastewater nutrients-including carbon, nitrogen, and phosphorus-alongside carbon dioxide, thus facilitating a multifaceted approach to pollution remediation. This review seeks to delve into the realization of carbon neutrality through algae-mediated wastewater treatment approaches. Through a comprehensive analysis, this review scrutinizes the trajectory of algae-based wastewater treatment via bibliometric analysis. It subsequently examines the case studies and empirical insights pertaining to algae cultivation, treatment performance analysis, cost and life cycle analyses, and the implementation of optimization methodologies rooted in artificial intelligence and machine learning algorithms for algae-based wastewater treatment systems. By synthesizing these diverse perspectives, this study aims to offer valuable insights for the development of future engineering applications predicated on an in-depth understanding of carbon neutrality within the framework of circular economy paradigms.

Ionic and nanoparticulate silver alleviate the toxicity of inorganic mercury in marine microalga Chaetoceros muelleri

Toxicological effects of silver nanoparticles (SNPs) in different organisms have been studied; however, interactions of SNPs with other environmental pollutants such as mercury are poorly understood. Herein, bioassay tests were performed according to ΟECD 201 guideline to assess the toxic effects induced by mercury ions (mercury chloride, MCl) on the marine microalga Chaetoceros muelleri in the presence of SNPs or silver ions (silver nitrate, SN). Acute toxicity tests displayed that the presence of SNPs or SN (0.01 mg L-1) significantly reduced the toxicity of MCl (0.001, 0.01, 0.1, 1, 10, and 100 mg L-1) and increased the IC50 of MCl from 0.072 ± 0.014 to 0.381 ± 0.029 and 0.676 ± 0.034 mg L-1, respectively. In the presence of SN or SNPs, the mercury-reducing effect on algal population growth significantly decreased. Considering the increase of IC50, the mercury toxicity decreased approximately 5.44 and 9.66 times in the presence of SNPs or SN, respectively. The chlorophyll a and c contents decreased at all exposures; however, the decrease by MCl-SNPs and MCl-SN was significantly less than MCl except at 1 mg L-1. The lowering effect of MCl-SN on chlorophyll contents was less than MCl and MCl-SNPs. MCl exposure induced significant raises in total protein content (TPC) at concentrations < 0.01mg  L-1, with a maximum of ~ 70.83% attained at 100 mg L-1. The effects of MCl-SNPs and MCl-SN on TPC were significantly less than MCl. Total lipid content (TLC) at all MCl concentrations was higher than the control, while at coexposure to MCl-SN, TLC did not change until 0.01 mg L-1 compared with the control. The effects of MCl-SN and MCL-SNPs on TPC and TLC were in line with toxicity results, and were significantly less than those of MCl individually, confirming their antagonistic effects on MCl. The morphological changes of algal cells and mercury content of the cell wall at MCl-SN and MCl-SNPs were mitigated compared with MCl exposure. These findings highlight the mitigatory impacts of silver species on mercury toxicity, emphasizing the need for better realizing the mixture toxicity effects of pollutants in the water ecosystem.

Chlorella pyrenoidosa as a potential bioremediator: Its tolerance and molecular responses to cadmium and lead

Heavy metal contamination negatively affects plants and animals in water as well as soils. Some microalgae can remove heavy metal contaminants from wastewater. The aim of this study was to screen green microalgae (GM) to identify those that tolerate high concentrations of toxic heavy metals in water as possible candidates for phytoremediation. Analyses of the tolerance, physiological parameters, ultrastructure, and transcriptomes of GM under Cd/Pb treatments were conducted. Compared with the other GM, Chlorella pyrenoidosa showed stronger tolerance to high concentrations of Cd/Pb. The reduced glutathione content and peroxidase activity were higher in C. pyrenoidosa than those in the other GM. Ultrastructural observations showed that, compared with other GM, C. pyrenoidosa had less damage to the cell surface and interior under Cd/Pb toxicity. Transcriptome analyses indicated that the "peroxisome" and "sulfur metabolism" pathways were enriched with differentially expressed genes under Cd/Pb treatments, and that CpSAT, CpSBP, CpKAT2, Cp2HPCL, CpACOX, CpACOX2, and CpACOX4, all of which encode antioxidant enzymes, were up-regulated under Cd/Pb treatments. These results show that C. pyrenoidosa has potential applications in the remediation of polluted water, and indicate that antioxidant enzymes contribute to Cd/Pb detoxification. These findings will be useful for producing algal strains for the purpose of bioremediation in water contamination.

Advances, challenges, and prospects in microalgal-bacterial symbiosis system treating heavy metal wastewater

Heavy metal (HM) pollution, particularly in its ionic form in water bodies, is a chronic issue threatening environmental security and human health. The microalgal-bacterial symbiosis (MABS) system, as the basis of water ecosystems, has the potential to treat HM wastewater in a sustainable manner, with the advantages of environmental friendliness and carbon sequestration. However, the differences between laboratory studies and engineering practices, including the complexity of pollutant compositions and extreme environmental conditions, limit the applications of the MABS system. Additionally, the biomass from the MABS system containing HMs requires further disposal or recycling. This review summarized the recent advances of the MABS system treating HM wastewater, including key mechanisms, influence factors related to HM removal, and the tolerance threshold values of the MABS system to HM toxicity. Furthermore, the challenges and prospects of the MABS system in treating actual HM wastewater are analyzed and discussed, and suggestions for biochar preparation from the MABS biomass containing HMs are provided. This review provides a reference point for the MABS system treating HM wastewater and the corresponding challenges faced by future engineering practices.

Interaction of Naturally Occurring Phytoplankton with the Biogeochemical Cycling of Mercury in Aquatic Environments and Its Effects on Global Hg Pollution and Public Health

The biogeochemical cycling of mercury in aquatic environments is a complex process driven by various factors, such as ambient temperature, seasonal variations, methylating bacteria activity, dissolved oxygen levels, and Hg interaction with dissolved organic matter (DOM). As a consequence, part of the Hg contamination from anthropogenic activity that was buried in sediments is reinserted into water columns mainly in highly toxic organic Hg forms (methylmercury, dimethylmercury, etc.). This is especially prominent in the coastal shallow waters of industrial regions worldwide. The main entrance point of these highly toxic Hg forms in the aquatic food web is the naturally occurring phytoplankton. Hg availability, intake, effect on population size, cell toxicity, eventual biotransformation, and intracellular stability in phytoplankton are of the greatest importance for human health, having in mind that such Hg incorporated inside the phytoplankton cells due to biomagnification effects eventually ends up in aquatic wildlife, fish, seafood, and in the human diet. This review summarizes recent findings on the topic of organic Hg form interaction with natural phytoplankton and offers new insight into the matter with possible directions of future research for the prevention of Hg biomagnification in the scope of climate change and global pollution increase scenarios.

Biological and green remediation of heavy metal contaminated water and soils: A state-of-the-art review

Contamination of the natural ecosystem by heavy metals, organic pollutants, and hazardous waste severely impacts on health and survival of humans, animals, plants, and microorganisms. Diverse chemical and physical treatments are employed in many countries, however, the acceptance of these treatments are usually poor because of taking longer time, high cost, and ineffectiveness in contaminated areas with a very high level of metal contents. Bioremediation is an eco-friendly and efficient method of reclaiming contaminated soils and waters with heavy metals through biological mechanisms using potential microorganisms and plant species. Considering the high efficacy, low cost, and abundant availability of biological materials, particularly bacteria, algae, yeasts, and fungi, either in natural or genetically engineered (GE) form, bioremediation is receiving high attention for heavy metal removal. This report comprehensively reviews and critically discusses the biological and green remediation tactics, contemporary technological advances, and their principal applications either in-situ or ex-situ for the remediation of heavy metal contamination in soil and water. A modified PRISMA review protocol is adapted to critically assess the existing research gaps in heavy metals remediation using green and biological drivers. This study pioneers a schematic illustration of the underlying mechanisms of heavy metal bioremediation. Precisely, it pinpoints the research bottleneck during its real-world application as a low-cost and sustainable technology.

A comparative study of the accumulation and detoxification of copper and zinc in Chlamydomonas reinhardtii: The role of extracellular polymeric substances

Extracellular polymeric substances (EPS) form an interface between microalgae and the surrounding water environment. Copper (Cu) and zinc (Zn) are essential micronutrients but may negatively affect microbial growth when their concentrations reach toxic thresholds. However, how EPS affect the accumulation and resistance of Cu and Zn in microalgae remains largely unknown. Here, we investigated EPS production upon Cu/Zn exposure and compared the tolerance strategies to the two metals by Chlamydomonas reinhardtii with and without EPS. Microalgal EPS synthesis was induced by Cu/Zn treatments, and the functional groups of polysaccharides and proteins were involved in complexation with metal ions. The extraction of EPS aggravated the toxicity and reduced the removal of metals from solution, but the effect was more pronounced for Cu than for Zn. Copper bound on the cell surface accounted for 54.6 ± 2.0 % of the Cu accumulated by C. reinhardtii, whose EPS components strongly correlated with Cu adsorption. In contrast, 74.3 ± 3.0 % of accumulated Zn was absorbed in cells, and glutathione synthesis was significantly induced. Redundancy and linear correlation analyses showed that the polysaccharide, protein and DNA contents in EPS were significantly correlated with Cu accumulation, absorption and adsorption but not with Zn. Data fitted to a Michaelis-Menten model further showed that the EPS-intact cells had higher binding capacity for Cu²⁺ but not for Zn²⁺. These differential impacts of EPS on Cu/Zn sorption and detoxification contribute to a more comprehensive understanding of the roles of microalgal EPS in the biogeochemical cycle of metals.

The interplay between microalgae and toxic metal(loid)s: mechanisms and implications in AMD phycoremediation coupled with Fe/Mn mineralization

Acid mine drainage (AMD) is low-pH with high concentration of sulfates and toxic metal(loid)s (e.g. As, Cd, Pb, Cu, Zn), thereby posing a global environmental problem. For decades, microalgae have been used to remediate metal(loid)s in AMD, as they have various adaptive mechanisms for tolerating extreme environmental stress. Their main phycoremediation mechanisms are biosorption, bioaccumulation, coupling with sulfate-reducing bacteria, alkalization, biotransformation, and Fe/Mn mineral formation. This review summarizes how microalgae cope with metal(loid) stress and their specific mechanisms of phycoremediation in AMD. Based on the universal physiological characteristics of microalgae and the properties of their secretions, several Fe/Mn mineralization mechanisms induced by photosynthesis, free radicals, microalgal-bacterial reciprocity, and algal organic matter are proposed. Notably, microalgae can also reduce Fe(III) and inhibit mineralization, which is environmentally unfavorable. Therefore, the comprehensive environmental effects of microalgal co-occurring and cyclical opposing processes must be carefully considered. Using chemical and biological perspectives, this review innovatively proposes several specific processes and mechanisms of Fe/Mn mineralization that are mediated by microalgae, providing a theoretical basis for the geochemistry of metal(loid)s and natural attenuation of pollutants in AMD.

Two novel superoxide dismutase genes (CuZnSOD and MnSOD) in the toxic marine dinoflagellate Alexandrium pacificum and their differential responses to metal stressors

Superoxide dismutase (SOD) is an important antioxidant enzyme that is involved in the first line of defense against reactive oxygen species (ROS) within cells. Herein, we determined two novel CuZnSOD and MnSOD genes from the toxic marine dinoflagellate Alexandrium pacificum (designated as ApCuZnSOD and ApMnSOD) and characterized their structural features and phylogenetic affiliations. In addition, we examined the relative gene expression and ROS levels following exposure to heavy metals. ApCuZnSOD encoded 358 amino acids (aa) with two CuZnSOD-conserved domains. ApMnSOD encoded 203 aa that contained a mitochondrial-targeting signal and a MnSOD signature motif but missed an N-terminal domain. Phylogenetic trees showed that ApCuZnSOD clustered with other dinoflagellates, whereas ApMnSOD formed a clade with green algae and plants. Based on the 72-h median effective concentration (EC₅₀), A. pacificum showed toxic responses in the order of Cu, Ni, Cr, Zn, Cd, and Pb. SOD expression levels dramatically increased after 6 h of Pb (≥6.5 times) and 48 h of Cu treatment (≥3.9 times). These results are consistent with the significant increase in ROS production in the A. pacificum exposed to Pb and Cu. These suggest that the two ApSODs are involved in the antioxidant defense system but respond differentially to individual metals.

Influence of microplastics on the toxicity of chlorpyrifos and mercury on the marine microalgae Rhodomonas lens

The growing use of plastics, including microplastics (MPs), has enhanced their potential release into aquatic environments, where microalgae represent the basis of food webs. Due to their physicochemical properties, MPs may act as carriers of organic and inorganic pollutants. The present study aimed to determine the toxicity of polyethylene MPs (plain and oxidized) and the model pollutants chlorpyrifos (CPF) and mercury (Hg) on the red microalgae Rhodomonas lens, to contribute to the understanding of the effects of MPs and associated pollutants on marine ecosystems, including the role of MPs as vectors of potentially harmful pollutants to marine food webs. R. lens cultures were exposed to MPs (1-1000 μg/L; 25-24,750 particles/mL), CPF (1-4900 μg/L), Hg (1-500 μg/L), and to CPF- and Hg-loaded MPs, for 96 h. Average specific growth rate (ASGR, day^-1), cellular viability and pigment concentration (chlorophyll a, c2 and carotenoids) were measured at 48 and 96 h. No significant effects were observed on the growth pattern of the microalgae after 96-h exposure to plain and oxidized MPs. However, a significant increase in cell concentration was detected after 48-h exposure to plain MPs. A decrease of the ASGR was noticed after exposure to CPF, Hg and to CPF/Hg-loaded MPs, whereas viability was affected by exposure to MPs, CPF and Hg, alone and in combination. Chlorophyll a and c2 significantly decreased when microalgae were exposed to plain MPs and CPF, while both pigments significantly increased when exposed to CPF-loaded MPs. Similarly, chlorophyll and carotenoids content significantly decreased after exposure to Hg, whereas a significant increase in chlorophyll a was observed after 48-h exposure to Hg-loaded MPs, at the higher tested concentration. Overall, the presence of MPs modulates the toxicity of Hg and CPF to these microalgae, decreasing the toxic effects on R. lens, probably due to a lower bioavailability of the contaminants.

Engineered microbes as effective tools for the remediation of polyaromatic aromatic hydrocarbons and heavy metals

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) have become a major concern to human health and the environment due to rapid industrialization and urbanization. Traditional treatment measures for removing toxic substances from the environment have largely failed, and thus development and advancement in newer remediation techniques are of utmost importance. Rising environmental pollution with HMs and PAHs prompted the research on microbes and the development of genetically engineered microbes (GEMs) for reducing pollution via the bioremediation process. The enzymes produced from a variety of microbes can effectively treat a range of pollutants, but evolutionary trends revealed that various emerging pollutants are resistant to microbial or enzymatic degradation. Naturally, existing microbes can be engineered using various techniques including, gene engineering, directed evolution, protein engineering, media engineering, strain engineering, cell wall modifications, rationale hybrid design, and encapsulation or immobilization process. The immobilization of microbes and enzymes using a variety of nanomaterials, membranes, and supports with high specificity toward the emerging pollutants is also an effective strategy to capture and treat the pollutants. The current review focuses on successful bioremediation techniques and approaches that make use of GEMs or engineered enzymes. Such engineered microbes are more potent than natural strains and have greater degradative capacities, as well as rapid adaptation to various pollutants as substrates or co-metabolizers. The future for the implementation of genetic engineering to produce such organisms for the benefit of the environment andpublic health is indeed long and valuable.

Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy

The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.

Microalgae-based wastewater treatment - Microalgae-bacteria consortia, multi-omics approaches and algal stress response

Sustainable environmental management is one of the important aspects of sustainable development goals. Increasing amounts of wastewaters (WW) from exponential economic growth is a major challenge, and conventional treatment methods entail a huge carbon footprint in terms of energy use and GHG emissions. Microalgae-based WW treatment is a potential candidate for sustainable WW treatment. The nutrients which are otherwise unutilized in the conventional processes are recovered in the beneficial microalgal biomass. This review presents comprehensive information regarding the potential of microalgae as sustainable bioremediation agents. Microalgae-bacterial consortia play a critical role in synergistic nutrient removal, supported by the complex nutritional and metabolite exchange between microalgae and the associated bacteria. Design of effective microalgae-bacteria consortia either by screening or by recent technologies such as synthetic biology approaches are highly required for efficient WW treatment. Furthermore, this review discusses the crucial research gap in microalgal WW treatment - the application of a multi-omics platform for understanding microalgal response towards WW conditions and the design of effective microalgal or microalgae-bacteria consortia based on genetic information. While metagenomics helps in the identification and monitoring of the microbial community throughout the treatment process, transcriptomics, proteomics and metabolomics aid in studying the algal cellular response towards the nutrients and pollutants in WW. It has been established that the integration of microalgal processes into conventional WW treatment systems is feasible. In this direction, future research directions for microalgal WW treatment emphasize the need for identifying the niche in WW treatment, while highlighting the pilot sale plants in existence. Microalgae-based WW treatment could be a potential phase in the waste hierarchy of circular economy and sustainability, considering WWs are a rich secondary source of finite resources such as nitrogen and phosphorus.

Algae in wastewater treatment, mechanism, and application of biomass for production of value-added product

The pollutants can enter water bodies at various point and non-point sources, and wastewater discharge remains a major pathway. Wastewater treatment effectively reduces contaminants, it is expensive and requires an eco-friendly and sustainable alternative approach to reduce treatment costs. Algae have recently emerged as a potentially cost-effective method to remediate toxic pollutants through the mechanism of biosorption, bioaccumulation, and intracellular degradation. Hence, before discharging the wastewater into the natural environment better solutions for environmental resource recovery and sustainable developments can be applied. More importantly, algae are a potential feedstock material for various industrial applications such as biofuel production. Currently, researchers are developing algae as a source for pharmaceuticals, biofuels, food additives, and bio-fertilizers. This review mainly focused on the potential of algae and their specific mechanisms involved in wastewater treatment and energy recovery systems leading to important industrial precursors. The review is highly beneficial for scientists, wastewater treatment plant operators, freshwater managers, and industrial communities to support the sustainable development of natural resources.

Microalgal Phycoremediation: A Glimpse into a Sustainable Environment

Microalgae are continually exposed to heavy metals and metalloids (HMMs), which stifles their development and reproduction due to the resulting physiological and metabolic abnormalities, leading to lower crop productivity. They must thus change their way of adapting to survive in such a hostile environment without sacrificing their healthy growth, development, reproductive capacity, or survival. The mode of adaptation involves a complex relationship of signalling cascades that govern gene expression at the transcriptional and post-transcriptional levels, which consequently produces altered but adapted biochemical and physiochemical parameters. Algae have been reported to have altered their physicochemical and molecular perspectives as a result of exposure to a variety of HMMs. Hence, in this review, we focused on how microalgae alter their physicochemical and molecular characteristics as a tolerance mechanism in response to HMM-induced stress. Furthermore, physiological and biotechnological methods can be used to enhance extracellular absorption and clean up. The introduction of foreign DNA into microalgae cells and the genetic alteration of genes can boost the bio-accumulation and remediation capabilities of microalgae. In this regard, microalgae represent an excellent model organism and could be used for HMM removal in the near future.

Prediction of the impact induced by Cd in binary interactions with other divalent metals on wild-type and Cd-resistant strains of Dictyosphaerium chlorelloides

The metals present in freshwater have a toxic profile with bioaccumulation and are biomagnified along the aquatic food chain. The metals induce high sensitivity in most aquatic organisms, while others, such as some microalgae species, evolve towards resistance. Therefore, this research predicted through the Combination Index method the binary interaction exposed to divalent metals by inhibiting population growth in a Cd-resistant strain (Dc^RCd100) compared to the wild-type strain (Dc1M^wt) of Dictyosphaerium chlorelloides and evaluate the specific resistance level obtained by Dc^RCd100 to Cd relative to other divalent metals.The results showed that Dc^RCd100 presents resistance compared to Dc1M^wt in individual exposure in the order of Fe²⁺  > Ni²⁺  > Cd²⁺  > Co²⁺  > Zn²⁺  > Cu²⁺  > Hg²⁺ with 50% inhibitory concentration at 72 h of exposure (IC₅₀₍₇₂₎) values 1253, 644.4, 423, 162.7, 141.3, 35.1, and 9.9 µM, respectively. It induces cross-resistance with high antagonistic rates (Combination Index (CI); CI >  > 1) in the Cd/Zn and Cd/Cu. Cd/Ni, its initial response, is antagonistic, and it ends in an additive (CI = 1). Dc^RCd100 showed a lower resistance in Co, and Cd/Fe resistance was reduced individually. The interaction with Hg increased its resistance ten times more than individually.This research highlights the use of the CI as a highly efficient prediction method of the binary metal interactions in wild-type and Cd-resistant strains of D. chlorelloides. It may have the potential for metal accumulation, allowing the development of new methods of bioremediation of metals in effluents, and to monitor the concentration of metals in wastewater, its relative availability, transport, and mechanisms on resistant strains of microalgae.

Is Genetic Engineering a Route to Enhance Microalgae-Mediated Bioremediation of Heavy Metal-Containing Effluents?

Contamination of the biosphere by heavy metals has been rising, due to accelerated anthropogenic activities, and is nowadays, a matter of serious global concern. Removal of such inorganic pollutants from aquatic environments via biological processes has earned great popularity, for its cost-effectiveness and high efficiency, compared to conventional physicochemical methods. Among candidate organisms, microalgae offer several competitive advantages; phycoremediation has even been claimed as the next generation of wastewater treatment technologies. Furthermore, integration of microalgae-mediated wastewater treatment and bioenergy production adds favorably to the economic feasibility of the former process-with energy security coming along with environmental sustainability. However, poor biomass productivity under abiotic stress conditions has hindered the large-scale deployment of microalgae. Recent advances encompassing molecular tools for genome editing, together with the advent of multiomics technologies and computational approaches, have permitted the design of tailor-made microalgal cell factories, which encompass multiple beneficial traits, while circumventing those associated with the bioaccumulation of unfavorable chemicals. Previous studies unfolded several routes through which genetic engineering-mediated improvements appear feasible (encompassing sequestration/uptake capacity and specificity for heavy metals); they can be categorized as metal transportation, chelation, or biotransformation, with regulation of metal- and oxidative stress response, as well as cell surface engineering playing a crucial role therein. This review covers the state-of-the-art metal stress mitigation mechanisms prevalent in microalgae, and discusses putative and tested metabolic engineering approaches, aimed at further improvement of those biological processes. Finally, current research gaps and future prospects arising from use of transgenic microalgae for heavy metal phycoremediation are reviewed.

Removal of Toxic Heavy Metals from Contaminated Aqueous Solutions Using Seaweeds: A Review

Heavy metal contamination affects lives with concomitant environmental pollution, and seaweed has emerged as a remedy with the ability to save the ecosystem, due to its eco-friendliness, affordability, availability, and effective metal ion removal rate. Heavy metals are intrinsic toxicants that are known to induce damage to multiple organs, especially when subjected to excess exposure. With respect to these growing concerns, this review presents the preferred sorption material among the many natural sorption materials. The use of seaweeds to treat contaminated solutions has demonstrated outstanding results when compared to other materials. The sorption of metal ions using dead seaweed biomass offers a comparative advantage over other natural sorption materials. This article summarizes the impact of heavy metals on the environment, and why dead seaweed biomass is regarded as the leading remediation material among the available materials. This article also showcases the biosorption mechanism of dead seaweed biomass and its effectiveness as a useful, cheap, and affordable bioremediation material.

Emerging role of microalgae in heavy metal bioremediation

Microalgae have been publicized for their diversified dominance responsiveness and bioaccumulation potential toward pollutants in an ecosystem. Also, algal's incredible capability as biocatalysts in environmental appliances has been well elucidated owing to their robustness and simple nutritional demand. Additionally, microalgae can deliver various collections of bio-based chemical compounds helpful for diversified applications, especially as green alternatives. The environment has been contaminated with various polluting agents; one principal polluting agent is heavy metals which are carcinogenic and show toxicity even in minimal quantity, cause unsatisfactory threats to the environmental ecosystem, including human and animal health. There is a prominent tendency to apply microalgae in the phytoremediation of heavy metals compounds because of its vast benefits, including great accessibility, cost-effective, excellent toxic metal eliminating efficiency, and nontoxic to the ecosystem. This review uncovers the most recent advancements and mechanisms associated with the bioremediation process and biosorption interaction of substantial harmful synthetic compounds processing microalgae species. Furthermore, future challenges and prospects in the utilization of microalgae in heavy metals bioremediation are also explored. The current review aims to give valuable information to aid the advancement of robust and proficient future microalgae-based heavy metal bioremediation innovations and summarizing a wide range of benefits socioeconomic scope to be employed in heavy metal compound removal in environment system.

Heavy metal detoxification mechanisms by microalgae: Insights from transcriptomics analysis

Heavy metal pollution in ecosystem is a global threat. The associated toxicity and carcinogenic nature of heavy metals/metalloids such as mercury, cadmium, lead, and arsenic are imposing a severe risk to both ecological diversity and human lives. Harnessing the adaptive feature of microalgae for remediating toxic heavy metal has reached a milestone in past few decades. Transcriptomics analyses have provided mechanistic insights to map the dynamics of cellular events under heavy metal stress, thus deciphering the strategic responses of microalgae. Here, the present review comprehensively addresses the elicited molecular responses of microalgae to detoxify the heavy metal stress. The review highlights the intricate role of biochemical components and signaling networks mediating stress responsive transitions of microalgae at physiological level. Furthermore, the differential gene expression signifying the transporters involved in uptake, distribution/sequestration, and efflux of heavy metal has also been reviewed. In a nutshell, this study provided a comprehensive understanding of the molecular mechanisms adopted by microalgae at transcriptome level to nullify the oxidative stress while detoxifying the heavy metals.

Metal and metal(loids) removal efficiency using genetically engineered microbes: Applications and challenges

The environment is being polluted in different many with metal and metalloid pollution, mostly due to anthropogenic activity, which is directly affecting human and environmental health. Metals and metalloids are highly toxic at low concentrations and contribute primarily to the survival equilibrium of activities in the environment. However, because of non-degradable, they persist in nature and these metal and metalloids bioaccumulate in the food chain. Genetically engineered microorganisms (GEMs) mediated techniques for the removal of metals and metalloids are considered an environmentally safe and economically feasible strategy. Various forms of GEMs, including fungi, algae, and bacteria have been produced by recombinant DNA and RNA technologies, which have been used to eliminate metal and metalloids compounds from the polluted areas. Besides, GEMs have the potentiality to produce enzymes and other metabolites that are capable of tolerating metals stress and detoxify the pollutants. Thus, the aim of this review is to discuss the use of GEMs as advanced tools to produce metabolites, signaling molecules, proteins through genetic expression during metal and metalloids interaction, which help in the breakdown of persistent pollutants in the environment.

Phycoremediation mechanisms of heavy metals using living green microalgae: physicochemical and molecular approaches for enhancing selectivity and removal capacity

Heavy metal (HM) contamination of water bodies is a serious global environmental problem. Because they are not biodegradable, they can accumulate in food chains, causing various signs of toxicity to exposed organisms, including humans. Due to its effectiveness, low cost, and ecological aspect, phycoremediation, or the use of microalgae's ecological functions in the treatment of HMs contaminated wastewater, is one of the most recommended processes. This study aims to examine in depth the mechanisms involved in the phycoremediation of HMs by microalgae, it also provides an overview of the prospects for improving the productivity, selectivity, and cost-effectiveness of this bioprocess through physicochemical and genetic engineering applications. Firstly, this review proposes a detailed examination of the biosorption interactions between cell wall functional groups and HMs, and their complexation with extracellular polymeric substances released by microalgae in the extracellular environment under stress conditions. Subsequently, the metal transporters involved in the intracellular bioaccumulation of HMs as well as the main intracellular mechanisms including compartmentalization in cell organelles, enzymatic biotransformation, or photoreduction of HMs were also extensively reviewed. In the last section, future perspectives of physicochemical and genetic approaches that could be used to improve the phytoremediation process in terms of removal efficiency, selectivity for a targeted metal, or reduction of treatment time and cost are discussed, which paves the way for large-scale application of phytoremediation processes.

Metabolomic Responses of Green Alga Chlamydomonas reinhardtii Exposed to Sublethal Concentrations of Inorganic and Methylmercury

Metabolomics characterizes low-molecular-weight molecules involved in different biochemical reactions and provides an integrated assessment of the physiological state of an organism. By using liquid chromatography-mass spectrometry targeted metabolomics, we examined the response of green alga Chlamydomonas reinhardtii to sublethal concentrations of inorganic mercury (IHg) and monomethylmercury (MeHg). We quantified the changes in the levels of 93 metabolites preselected based on the disturbed metabolic pathways obtained in a previous transcriptomics study. Metabolites are downstream products of the gene transcription; hence, metabolite quantification provided information about the biochemical status of the algal cells exposed to Hg compounds. The results showed that the alga adjusts its metabolism during 2 h exposure to 5 × 10^-9 and 5 × 10^-8 mol L^-1 IHg and MeHg by increasing the level of various metabolites involved in amino acid and nucleotide metabolism, photorespiration, and tricarboxylic acid (TCA) cycle, as well as the metabolism of fatty acids, carbohydrates, and antioxidants. Most of the metabolic perturbations in the alga were common for IHg and MeHg treatments. However, the exposure to IHg resulted in more pronounced perturbations in the fatty acid and TCA metabolism as compared with the exposure to MeHg. The observed metabolic perturbations were generally consistent with our previously published transcriptomics results for C. reinhardtii exposed to the comparable level of IHg and MeHg. The results highlight the potential of metabolomics for toxicity evaluation, especially to detect effects at an early stage of exposure prior to their physiological appearance.

Validation and uncertainty estimation of analytical method for quantification of phytochelatins in aquatic plants by UPLC-MS

Phytochelatins (PCs) are peptides that play an important role in homeostasis and detoxification of heavy metal in plants. Furthermore, they have been proposed as earlier potential biomarkers of aquatic pollution by heavy metals. Nowadays, several researchers have reported on current methods for quantification of glutathione (GSH) and the PCs (phytochelatin 2, phytochelatin 3, phytochelatin 4) quantification in plants. However, no method has reported the uncertainty of the measurement, which helps to improve the accuracy and quality assurance in the PC quantification. In this work, a new methodology using ultra-high-performance liquid chromatography coupled to mass spectrometry (UPLC-MS) to measure with high precision and accuracy the PCs in aquatic plants, was validated. Selectivity, linearity, limit of detection, limit of quantification, precision, trueness and uncertainty estimation were examined as parts of the method validation. The described method shows excellent linearity in different ranges for all analytes with coefficients of determination higher than 0.99. The relative standard deviation for intra-day precision was <3% and for inter-day <10%. All LOD and LOQ analytes ranged from 0.02 to 0.08 μg ml^-1, and from 0.03 to 0.09 μg ml^-1, respectively. The recoveries varied from 61% to 89%. In order to obtain an interval of results with the highest confidence levels, the uncertainty associated with the measurements was evaluated. The calibration curve (>50%) and recovery (19-44%) were the most important contributors to the total uncertainty. The proposed method was applied to quantify GSH and PCs in the aquatic plants Lemna gibba L., Myriophyllum heterophyllum Michx., Arenaria paludicola and Hydrocotyle ranunculoides L. fil., showing statistical differences in the mass fraction of the analytes.

Growth and photosynthetic responses of Ochromonas gloeopara to cadmium stress and its capacity to remove cadmium

Cadmium (Cd) is one of the predominant anthropogenic pollutants in aquatic systems. As Cd has negative effects on species at all trophic levels, the community composition in aquatic habitats can be changed as a result of Cd stress. The response of mixotrophic protists to environmental stressors is particularly important as they act as both producers and consumers in complex planktonic communities. In this study, we used mixotrophic Ochromonas gloeopara to study its growth and photosynthetic responses to Cd, and specially focused on the effects of initial Cd concentrations and nutrient levels on its capacity to remove Cd. Results showed that when Cd concentration reached 0.5 mg L-1, the growth rate and carrying capacity were significantly inhibited, whereas the photosynthesis was markedly decreased when Cd concentration reached 0.15 mg L-1. Moreover, under Cd concentration 0.15, 0.5, 0.9, 1.6, and 2.0 mg L-1, the removal efficiencies of Cd by O. gloeopara were 83.2%, 77.7%, 74.6%, 70.1%, and 68.8%, respectively. The increase of nitrogen did not cause significant effect on the removal capacity of Cd by O. gloeopara, but increased concentration of phosphorus significantly enhanced the removal capacity of Cd. Our findings indicated that the mixotrophic O. gloeopara has strong tolerance and capacity to remove Cd, and increasing concentration of phosphorus can increase its removal capacity, suggesting that O. gloeopara has great potential application value in mitigating Cd pollution in waters.

Mercury detoxification by absorption, mercuric ion reductase, and exopolysaccharides: a comprehensive study

Mercury (Hg), the environmental toxicant, is present in the soil, water, and air as it is substantially distributed throughout the environment. Being extremely toxic even at low concentration, its remediation is utterly important. Therefore, it is necessary to detoxify the contaminant within the acceptable limits before threatening the environment. Although various conventional methods are being used, irrespective of high cost, it produces intermediate toxic by-product too. Biological methods are eco-friendly, clean, greener, and safer for the remediation of heavy metals corresponding to the conventional remediation due to their economic and high-tech constraints. Bioremediation is now being used for Hg (II) removal, which involves biosorption and bioaccumulation mechanisms or both, also mercuric ion reductase, exopolysaccharide play significant role in detoxification of mercury by acting a potential instrument for the remediation of heavy metals. In this review paper, we shed light on problems caused by mercury pollution, mercury cycle, and its global scenario and detoxification approaches by biological methods and result found in the literature.

Bioremediation of heavy metals using microalgae: Recent advances and mechanisms

Five heavy metals namely, arsenic (As), cadmium (Cd), chromium (Cr), lead (Pb) and mercury (Hg) are carcinogenic and show toxicity even at trace amounts, posing threats to environmental ecology and human health. There is an emerging trend of employing microalgae in phycoremediation of heavy metals, due to several benefits including abundant availability, inexpensive, excellent metal removal efficiency and eco-friendly nature. This review presents the recent advances and mechanisms involved in bioremediation and biosorption of these toxic heavy metals utilizing microalgae. Tolerance and response of different microalgae strains to heavy metals and their bioaccumulation capability with value-added by-products formation as well as utilization of non-living biomass as biosorbents are discussed. Furthermore, challenges and future prospects in bioremediation of heavy metals by microalgae are also explored. This review aims to provide useful insights to help future development of efficient and commercially viable technology for microalgae-based heavy metal bioremediation.

Scenedesnus rotundus isolated from the petroleum effluent employs alternate mechanisms of tolerance to elevated levels of Cadmium and Zinc

Scenedesmus rotundus was isolated from metal contaminated petroleum industry effluent and its tolerance to Cadmium and Zinc was tested using different concentrations of CdCl₂ and ZnCl₂ ranging from 0.001 mM to 1.0 mM of Cd and 0.03 mM to 1.21 mM of Zn amended in Bolds Basal medium. The changes in cell count recorded at regular intervals upto a period of 24 days revealed a concentration dependent inhibition in growth. Concentration of the metal, at which 50% of the cells are live and metabolically active referred to as EC₅₀ was calculated as 0.04 mM for Cd and 0.2 mM for Zn. Further, the effect of EC₅₀ of the metals on the protein content, uptake of metals at varying pH, oxidative stress markers including lipid peroxidation, protein oxidation andnd oxygen uptake, levels of enzymatic antioxidants such as catalase and superoxide dismutase and non-enzymatic antioxidants namely, GSH and PC₄ were determined. Though a direct correlation could not be drawn between pH and metal uptake, the compartmentalization of the metal during the lag phase and exponential phase was evident, most of the metal was present in extracellular fractions in the former, while in the later it was internalized. Our study shows a clear correlation between toxicity of Cd and the ability of the algae to synthesize PC₄ from GSH and chelate it leading to detoxification, while Zn treatment led to an increase in the activity of catalase and superoxide dismutase and replete GSH pools. Further the changes in the cell wall structure at EC₅₀ of Cd and Zn were studied. This is the first report on effect of heavy metals on the structural modifications of the cell wall of Scenedesmus in general and Scenedesmus rotundus in particular, indicating appearance of granules on the entire cell surface in both Cd and Zn treatments, with the degree of granulation increasing in the order of pH 12 > 10 > 8 in Cd treatment. Further structures of higher order resembling minute wheels are observed in Cd treated cells are also reported.

Response of the freshwater diatom Halamphora veneta (Kützing) Levkov to copper and mercury and its potential for bioassessment of heavy metal toxicity in aquatic habitats

This study investigates the effects of copper and mercury on growth rate, chlorophyll a content, superoxide dismutase (SOD) activity, SOD mRNA gene expression, and frustule morphology of the benthic freshwater diatom Halamphora veneta (Kützing) Levkov and the potential utility of each for toxicity assessment in aquatic habitats. Results showed the following: (1) Compared to mercury, exposure to copper resulted in greater growth inhibition of H. veneta even at low concentrations and after short durations of exposure; (2) high accumulation of chlorophyll a in H. veneta is a stress response to the presence of heavy metals; (3) SOD activity and SOD gene expression varied in H. veneta according to the concentration, exposure time, and type of heavy metal; and (4) exposure to mercury resulted in deformity in the shape and an increase in size of the frustule of H. veneta. Growth rate, chlorophyll a content, SOD activity and gene expression, and frustule morphology of H. veneta are all potential candidates for the toxicological assessment of copper and mercury in aquatic habitats.

Bioaccumulation and subcellular partitioning of Cr(III) and Cr(VI) in the freshwater green alga Chlamydomonas reinhardtii

Chromium occurs in aquatic environments under two main redox forms, namely Cr(III) and Cr(VI), with different geochemical and biochemical properties. Cr(VI) readily crosses biological membranes of living organisms and once inside the cells it undergoes a rapid reduction to Cr(III). The route of entry for the latter form is, however, poorly known. Using the radioactive tracer ⁵¹Cr we compared the accumulation (absorption and adsorption) of the two Cr forms by the green unicellular alga Chlamydomonas reinhardii after 1h and 72h of exposure to 100nM of either Cr(III) or Cr(VI) at pH 7. Both Cr forms had similar accumulation, with a major part in the extracellular (adsorbed) fraction after 1h and a major part of total accumulated Cr in the intracellular (absorbed) fraction after 72h. We also investigated the intracellular partitioning of Cr using an operational fractionation scheme and found that both Cr forms had similar distributions among fractions: Cr was mostly associated with organelles (23±12% after 1h and 37±7% after 72h) and cytosolic heat-stable proteins and peptides (39±18% after 1h and 35±3% after 72h) fractions. Further investigations using a metallomic approach (SEC-ICP-MS) were performed with the heat-stable proteins and peptides fraction to compare the distribution of the two Cr forms among various biomolecules of this fraction. One Cr-binding biomolecule (∼28kDa) appeared after 1h of exposure for both Cr species. After 72h another biomolecule of lower molecular weight (∼0.7kDa) was involved in binding Cr and higher signal intensities were observed for Cr(VI) than for Cr(III). We show, for the first time, that both Cr(III) and Cr(VI) have similar fate within algal cells, supporting the tenet that a unique redox form occurs within cells.