Improved thromboresistance and analytical performance of intravascular amperometric glucose sensors using optimized nitric oxide release coatings

Recent advances in materials and manufacturing of implantable devices for continuous health monitoring

Implantable devices are vital in healthcare, enabling continuous monitoring, early disease detection, informed decision-making, enhanced outcomes, cost reduction, and chronic condition management. These devices provide real-time data, allowing proactive healthcare interventions, and contribute to overall improvements in patient care and quality of life. The success of implantable devices relies on the careful selection of materials and manufacturing methods. Recent materials research and manufacturing advancements have yielded implantable devices with enhanced biocompatibility, reliability, and functionality, benefiting human healthcare. This paper provides a comprehensive overview of the latest developments in implantable medical devices, emphasizing the importance of material selection and manufacturing methods, including biocompatibility, self-healing capabilities, corrosion resistance, mechanical properties, and conductivity. It explores various manufacturing techniques such as microfabrication, 3D printing, laser micromachining, electrospinning, screen printing, inkjet printing, and nanofabrication. The paper also discusses challenges and limitations in the field, including biocompatibility concerns, privacy and data security issues, and regulatory hurdles for implantable devices.

Electrochemical Generation of Nitric Oxide for Medical Applications

Over the past 30 years, the significance of nitric oxide (NO) has become increasingly apparent in mammalian physiology. It is biosynthesized by three isoforms of nitric oxide synthases (NOS): neuronal (nNOS), endothelial (eNOS), and inducible (iNOS). Neuronal and eNOS both produce low levels of NO (nM) as a signaling agent and vasodilator, respectively. Inducible (iNOS) is present in activated macrophages at sites of infection to generate acutely toxic (μM) levels of NO as part of the mammalian immune defense mechanism. These discoveries have led to numerous animal and clinical studies to evaluate the potential therapeutic utility of NO in various medical operations/treatments, primarily using NO gas (via gas-cylinders) as the NO source. In this review, we focus specifically on recent advances in the electrochemical generation of NO (E-NOgen) as an alternative means to generate NO from cheap and inert sources, and the fabrication and testing of biomedical devices that utilize E-NOgen to controllably generate NO for medical applications.

Drugs for the treatment of glaucoma: Targets, structure-activity relationships and clinical research

Glaucoma is the third leading cause of blindness and impairment of vision worldwide, after refractive errors and cataracts. According to the survey, the number of people with glaucoma is more than 76 million, with projections increasing to 112 million by 2040. With the coming of an aging society, the number of people suffering from glaucoma will increase day by day. Glaucoma is a heterogeneous disease characterized by damage to the head of the optic nerve and visual field. High intraocular pressure is a major risk and cause of glaucoma optic neuropathy. Therefore, drug lowering intraocular pressure therapy is still the first-line therapy in clinical practice. Here, the targets, structure-activity relationship, and clinical progress of drugs for the treatment of glaucoma are reviewed.

Combination of Nitric Oxide Release and Surface Texture for Mitigating the Foreign Body Response

The tissue response to polyurethane (PU)-coated implants employing active and/or passive FBR mitigation techniques was evaluated over a 28 day study in a diabetic swine model. Active FBR mitigation was achieved through the sustained release of nitric oxide (NO) from a mesoporous silica nanoparticle-doped PU coating. Passive FBR mitigation was achieved through the application of a foam- or fiber-based topcoat. These topcoats were designed to possess topographical features known to promote tissue integration with foam-coated implants having pore sizes of approximately 50 μm and fiber-coated implants consisting of fiber diameters of less than 1 μm. Nitric oxide-release profiles were minimally impacted by the presence of either topcoat. Inflammatory cell density and collagen density at the implant-tissue interface were assessed at 7, 14, 21, and 28 days following implantation. Nitric oxide-releasing implants had significantly lower inflammatory cell density and collagen density than non-NO-releasing controls. The presence of a topcoat did not significantly impact inflammatory cell density, though top-coated textured implants resulted in significantly lower collagen density, irrespective of NO release. Overall, coatings that combine NO release with surface texture demonstrated the greatest potential for tissue-based biomedical device applications.

Electrochemical glucose sensors in diabetes management: an updated review (2010-2020)

While over half a century has passed since the introduction of enzyme glucose biosensors by Clark and Lyons, this important field has continued to be the focus of immense research activity. Extensive efforts during the past decade have led to major scientific and technological innovations towards tight monitoring of diabetes. Such continued progress toward advanced continuous glucose monitoring platforms, either minimal- or non-invasive, holds considerable promise for addressing the limitations of finger-prick blood testing toward tracking glucose trends over time, optimal therapeutic interventions, and improving the life of diabetes patients. However, despite these major developments, the field of glucose biosensors is still facing major challenges. The scope of this review is to present the key scientific and technological advances in electrochemical glucose biosensing over the past decade (2010-present), along with current obstacles and prospects towards the ultimate goal of highly stable and reliable real-time minimally-invasive or non-invasive glucose monitoring. After an introduction to electrochemical glucose biosensors, we highlight recent progress based on using advanced nanomaterials at the electrode-enzyme interface of three generations of glucose sensors. Subsequently, we cover recent activity and challenges towards next-generation wearable non-invasive glucose monitoring devices based on innovative sensing principles, alternative body fluids, advanced flexible materials, and novel platforms. This is followed by highlighting the latest progress in the field of minimally-invasive continuous glucose monitoring (CGM) which offers real-time information about interstitial glucose levels, by focusing on the challenges toward developing biocompatible membrane coatings to protect electrochemical glucose sensors against surface biofouling. Subsequent sections cover new analytical concepts of self-powered glucose sensors, paper-based glucose sensing and multiplexed detection of diabetes-related biomarkers. Finally, we will cover the latest advances in commercially available devices along with the upcoming future technologies.

Enhanced Hemocompatibility and In Vivo Analytical Accuracy of Intravascular Potentiometric Carbon Dioxide Sensors via Nitric Oxide Release

In this letter, the innate ability of nitric oxide (NO) to inhibit platelet activation/adhesion/thrombus formation is employed to improve the hemocompatibility and in vivo accuracy of an intravascular (IV) potentiometric PCO₂ (partial pressure of carbon dioxide) sensor. The catheter-type sensor is fabricated by impregnating a segment of dual lumen silicone tubing with a proton ionophore, plasticizer, and lipophilic cation-exchanger. Subsequent filling of bicarbonate and strong buffer solutions and placement of Ag/AgCl reference electrode wires within each lumen, respectively, enables measurement of the membrane potential difference across the inner wall of the tube, with this potential changing as a function of the logarithm of sample PCO₂. The dual lumen device is further encapsulated within a S-nitroso-N-acetyl-DL-penicillamine (SNAP)-doped silicone tube that releases physiological levels of NO. The NO releasing sensor exhibits near-Nernstian sensitivity toward PCO₂ (slope = 59.31 ± 0.78 mV/decade) and low drift rates (<2 mV/24 h after initial equilibration). In vivo evaluation of the NO releasing sensors, performed in the arteries and veins of anesthetized pigs for 20 h, shows enhanced accuracy (vs non-NO releasing sensors) when benchmarked to measurements of discrete blood samples made with a commercial blood gas analyzer. The accurate, continuous monitoring of blood PCO₂ levels achieved with this new IV NO releasing PCO₂ sensor configuration could help better manage hospitalized patients in critical care units.

Evaluation of an Anti-Thrombotic Continuous Lactate and Blood Pressure Monitoring Catheter in an In Vivo Piglet Model undergoing Open-Heart Surgery with Cardiopulmonary Bypass

Blood lactate and blood pressure measurements are important predictors of life-threatening complications after infant open-heart surgeries requiring cardiopulmonary bypass (CPB). We have developed an intravascular nitric oxide (NO)-releasing 5-Fr catheter that contains a lactate sensor for continuous in-blood lactate monitoring and a dedicated lumen for third-party pressure sensor attachment. This device has antimicrobial and antithrombotic properties and can be implanted intravascularly. The importance of this design is its ability to inhibit thrombosis, due to the slow release of NO through the surface of the catheter and around the electrochemical lactate sensors, to allow continuous data acquisition for more than 48 h. An in vivo study was performed using six piglets undergoing open-heart surgery with CPB and cardioplegic arrest, in order to mimic intra-operative conditions for infants undergoing cardiac surgery with CPB. In each study of 3 h, two 5-Fr NO-releasing lactate and blood-pressure monitoring catheters were implanted in the femoral vessels (arteries and veins) and the CPB circuitry to monitor changing lactate levels and blood pressures during and immediately after aortic cross-clamp removal and separation from CBP. Electrical signals continuously acquired through the sensors were processed and displayed on the device's display and via Bluetooth to a computer in real-time with the use of a two-point in vivo calibration against blood gas results. The study results show that lactate levels measured from those sensors implanted in the CPB circuit during CPB were comparable to those acquired by arterial blood gas measurements, whereas lactate levels measured from sensors implanted in the femoral artery were closely correlated with those acquired intermittently by blood gas prior to CPB initiation, but not during CPB. Blood pressure sensors attached to one lumen of the device displayed accurate blood pressure readings compared to those measured using an FDA approved pressure sensor already on the market. We recommend that the sensor be implanted in the CPB's circuit to continuously monitor lactate during CPB, and implanted in the femoral arteries or jugular veins to monitor lactate before and after CPB. Blood pressures dramatically drop during CPB due to lower blood flow into the lower body, and we suspect that the femoral arteries are likely collapsing or constricting on the implanted catheter and disrupting the sensor-to-blood contact. This study shows that the device is able to accurately and continuously monitor lactate levels during CPB and potentially prevent post-surgery complications in infants.

Studies of combined NO-eluting/CD47-modified polyurethane surfaces for synergistic enhancement of biocompatibility

The blood compatibility of various intravascular (IV) devices (e.g., catheters, sensors, etc.) is compromised by activation of platelets that can cause thrombus formation and device failure. Such devices also carry a high risk of microbial infection. Recently, nitric oxide (NO) releasing polymers/devices have been proposed to reduce these clinical problems. CD47, a ubiquitously expressed transmembrane protein with proven anti-inflammation/anti-platelet properties when immobilized on polymeric surfaces, is a good candidate to complement NO release in both effectiveness and longevity. In this work, we successfully appended CD47 peptides (pepCD47) to the surface of biomedical grade polyurethane (PU) copolymers. SIRPα binding and THP-1 cell attachment experiments strongly suggested that the pepCD47 retains its biological properties when bound to PU films. In spite of the potentially high reactivity of NO toward various amino acid residues in CD47, the efficacy of surface-immobilized pepCD47 to prevent inflammatory cell attachment was not inhibited after being subjected to a high flux of NO for three days, demonstrating excellent compatibility of the two species. We further constructed a CD47 surface immobilized silicone tubing filled with NO releasing S-nitrosoglutathione/ascorbic acid (GSNO/AA) solution for synergistic biocompatibility evaluation. Via an ex vivo Chandler loop model, we demonstrate for the first time that NO release and CD47 modification could function synergistically at the blood/material interface and produce greatly enhanced anti-inflammatory/anti-platelet effects. This concept should be readily implementable to create a new generation of thromboresistant/antimicrobial implantable devices.

Long-Term Accurate Continuous Glucose Biosensors via Extended Nitric Oxide Release

Analytical performance and tissue interactions of nitric oxide (NO)-releasing continuous glucose sensors were evaluated over a 28 d study in a diabetic swine model. Interstitial glucose was detected using an implanted needle-type amperometric glucose sensor. Two NO-release durations from the sensor surface were achieved by doping the membranes with nonporous (14 d release) or porous (30 d release) S-nitrosothiol-functionalized silica nanoparticles. Numerical and clinical accuracy of the sensors were assessed at time points (1, 7, 14, 21, and 28 d) following implantation. Nitric oxide-releasing sensors demonstrated accurate glucose detection over a time period directly correlated with the active release of NO. Silica particle-doped sensors that released NO for 30 d showed standard-compliant accuracy (i.e., mean absolute relative difference ≤ 15%) for >3 weeks post-implantation. Histological staining for inflammatory biomarkers suggested that the observed performance improvement was the result of decreased inflammatory cell count and a lower density collagen capsule.

Extended Nitric Oxide-Releasing Polyurethanes via S-Nitrosothiol-Modified Mesoporous Silica Nanoparticles

S-Nitrosothiol (RSNO)-modified mesoporous silica nanoparticles (MSNs) were doped into polyurethane (PU) to achieve extended NO-releasing coatings. Parameters influencing the synthesis of RSNO-functionalized nitric oxide (NO)-releasing MSNs were evaluated to elucidate the impact of pore structure on NO release characteristics. The porous particles were characterized as having larger NO payloads and longer NO release durations than those of nonporous particles, a feature attributed to the recombination of the NO radical in confined intraporous microenvironments. NO release kinetics, particle leaching, and thermal stability of the RSNO-modified MSNs dispersed in PU were evaluated as a function of PU structure to determine the feasibility of preparing a range of NO-releasing polymers for biomedical device-coating applications. The NO release kinetics from the PUs proved to be highly extended (>30 d) and consistent over a range of PU properties. Furthermore, RSNO-modified MSN leaching was not observed from the PUs. The NO release payloads were also maintained for 4 days for polymers stored at 0 °C.

Evaluation of Continuous Lactate Monitoring Systems within a Heparinized In Vivo Porcine Model Intravenously and Subcutaneously

We present an animal model used to evaluate the in vivo performance of electrochemical amperometric continuous lactate sensors compared to blood gas instruments. Electrochemical lactate sensors were fabricated, placed into 5 Fr central venous catheters (CVCs), and paired with wireless potentiostat devices. Following in vivo evaluation and calibration, sensors were placed within the jugular and femoral veins of a porcine subject as a preliminary assessment of in vivo measurement accuracy. The mobile electronic circuit potentiostat devices supplied the operational voltage for the sensors, measured the resultant steady-state current, and recorded the sensor response values in internal memory storages. An in vivo time trace of implanted intravenous (IV) sensors demonstrated lactate values that correlated well with the discrete measurements of blood samples on a benchtop point-of-care sensor-based instrument. Currents measured continuously from the implanted lactate sensors over 10 h were converted into lactate concentration values through use of a two-point in vivo calibration. Study shows that intravenously implanted sensors had more accurate readings, faster peak-reaching rates, and shorter peak-detection times compared to subcutaneously placed sensors. IV implanted and subcutaneously placed sensors closer to the upper body (in this case neck) showed faster response rates and more accurate measurements compared to those implanted in the lower portion of the porcine model. This study represents an important milestone not only towards continuous lactate monitoring for early diagnosis and intervention in neonatal patients with congenital heart disease undergoing cardiopulmonary bypass surgeries, but also in the intervention of critical ill patients in the Intensive Care Units or during complex surgical procedures.

Comparison of Copper(II)-Ligand Complexes as Mediators for Preparing Electrochemically Modulated Nitric Oxide-Releasing Catheters

Further studies aimed at examining the activity of different Cu(II)-ligand complexes to serve as electron-transfer mediators to prepare novel antimicrobial/thromboresistant nitric oxide (NO)-releasing intravenous catheters are reported. In these devices, the NO release can be modulated by applying different potentials or currents to reduce the Cu(II)-complexes to Cu(I) species which then reduce nitrite ions into NO_(g) within a lumen of the catheter. Four different ligands are compared with respect to NO generation efficiency and stability over time using both single- and dual-lumen silicone rubber catheters: N-propanoate- N, N-bis(2-pyridylethyl)amine (BEPA-Pr), N-propanoate- N, N-bis(2-pyridylmethyl)amine (BMPA-Pr), 1,4,7-trimethyl-1,4,7-triazacyclononane (Me₃TACN), and tris(2-pyridylmethyl)amine (TPMA). Of these, the Cu(II)BEPA-Pr and Cu(II)Me₃TACN complexes provide biomedically useful NO fluxes from the surface of the catheters, >2 × 10^-10 mol·min^-1·cm^-2, under conditions mimicking the bloodstream environment. Cu(II)Me₃TACN exhibits the best stability over time with a steady and continuous NO release observed for 8 d under a nitrogen atmosphere. Antimicrobial experiments conducted over 5 d with NO-releasing catheters turned "on" electrochemically for only 3 or 6 h each day revealed >2 logarithmic units in reduction of bacterial biofilm attached to the catheter surfaces. The use of optimal Cu(II)-ligand complexes within a lumen reservoir along with high levels of nitrite ions can potentially provide an effective method of preventing/decreasing the rate of infections caused by intravascular catheters.

Nitric Oxide Release for Improving Performance of Implantable Chemical Sensors - A Review

Over the last three decades, there has been extensive interest in developing in vivo chemical sensors that can provide real-time measurements of blood gases (oxygen, carbon dioxide, and pH), glucose/lactate, and potentially other critical care analytes in the blood of hospitalized patients. However, clot formation with intravascular sensors and foreign body response toward sensors implanted subcutaneously can cause inaccurate analytical results. Further, the risk of bacterial infection from any sensor implanted in the human body is another major concern. To solve these issues, the release of an endogenous gas molecule, nitric oxide (NO), from the surface of such sensors has been investigated owing to NO's ability to inhibit platelet activation/adhesion, foreign body response and bacterial growth. This paper summarizes the importance of NO's therapeutic potential for this application and reviews the publications to date that report on the analytical performance of NO release sensors in laboratory testing and/or during in vivo testing.

Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO)

Biomedical devices are essential for patient diagnosis and treatment; however, when blood comes in contact with foreign surfaces or homeostasis is disrupted, complications including thrombus formation and bacterial infections can interrupt device functionality, causing false readings and/or shorten device lifetime. Here, we review some of the current approaches for developing antithrombotic and antibacterial materials for biomedical applications. Special emphasis is given to materials that release or generate low levels of nitric oxide (NO). Nitric oxide is an endogenous gas molecule that can inhibit platelet activation as well as bacterial proliferation and adhesion. Various NO delivery vehicles have been developed to improve NO's therapeutic potential. In this review, we provide a summary of the NO releasing and NO generating polymeric materials developed to date, with a focus on the chemistry of different NO donors, the polymer preparation processes, and in vitro and in vivo applications of the two most promising types of NO donors studied thus far, N-diazeniumdiolates (NONOates) and S-nitrosothiols (RSNOs).