Effective E. coli inactivation of core-shell ZnO@ZIF-8 photocatalysis under visible light synergize with peroxymonosulfate: Efficiency and mechanism

Effect of humic acid on visible light photocatalytic inactivation of bacteriophage f2 with electrospinning Cu-TiO2 nanofibers: insight into the mechanisms

Photocatalytic disinfection is a promising technology with low cost and high efficiency. However, most of the current studies on photocatalytic disinfection ignore the widespread presence of natural organic matter (NOM) in water bodies, so the incomplete conclusions obtained may not be applicable. Herein, this paper systematically studied the influence of humic acid (HA), one of the most important components of NOM, on the photocatalytic inactivation of bacteriophage f2 with electrospinning Cu-TiO2 nanofibers. We found that with the addition of HA, the light transmittance of the solution at 550 nm decreased from 94 to 60%, and the band gap of the photocatalyst was increased from 2.96 to 3.05 eV. Compared with reacting without HA, the degradation amount of RNA of f2 decreased by 88.7% after HA was added, and the RNA concentration increased from 1.95 to 4.38 ng·μL-1 after the reaction. Hence, we propose mechanisms of the effect of HA on photocatalytic disinfection: photo-shielding, passivation of photocatalysts, quenching of free radicals, and virus protection. Photo-shielding and photocatalyst passivation lead to the decrease of photocatalyst activity, and the reactive oxygen species (ROSs) (·OH, ·O2-, 1O2, H2O2) are further trapped by HA. The HA in water also can protect the shape of phage f2 and reduce the leakage of protein and the destruction of ribonucleic acid (RNA). This work provides an insight into the mechanisms for the influence of HA in photocatalytic disinfection process and a theoretical basis for its practical application.

Fabrication of the flower-like Z-scheme heterojunction photocatalyst Bi-BiOI/UiO 66 for enhanced photodegradation of acetaminophen in simulated wastewater

Acetaminophen is a representative contaminant of emerging persistent organic pollutants that can cause environmental problems when it enters municipal wastewater. An innovative flower-like Z-scheme photocatalyst Bi-BiOI/UiO 66 heterojunction composite was designed and constructed via a one-step solvothermal method. Investigations demonstrated that the Z-scheme structure strongly contributes to increasing the degradation efficiency of micropollutants. The results indicate that the bandgap energy (Eg) of the Bi-BiOI/UiO 66 composite decreases significantly from 3.22 eV to 2.43 eV, in comparison with that of pure copper-based UiO 66. Under suitable conditions (5 mg/L Ace, pH 3, 0.05 g/L), the organic pollutants in the water can be removed completely. A k value of 5.67 × 10-2 min-1 for the Bi-BiOI/UiO 66 heterojunction composite was found to effectively represent the acetaminophen photodegradation process. The reaction mechanism of acetamide in aqueous solution is also discussed. The Bi in Bi-BiOI can use surface plasmon resonance to form an electric field and accelerate the separation of photogenerated electrons and holes. This study highlights the potential of a novel photocatalyst for practical application.

Progress of disinfection catalysts in advanced oxidation processes, mechanisms and synergistic antibiotic degradation

Human diseases caused by pathogenic microorganisms make people pay more attention to disinfection. Meanwhile, antibiotics can cause microbial resistance and increase the difficulty of disease treatment, resulting in risk of triggering a vicious circle. Advanced oxidation process (AOPs) has been widely studied in the field of synergistic treatment of the two contaminates. This paper reviews the application of catalytic materials and their modification strategies in the context of AOPs for disinfection and antibiotic degradation. It also delves into the mechanisms of disinfection such as the pathways for microbial inactivation and the related influencing factors, which are essential for understanding the pivotal role of catalytic materials in disinfection principles by AOPs. More importantly, the exploratory research on the combined use of AOPs for disinfection and antibiotic degradation is discussed, and the potential and prospects in this field is highlighted. Finally, the limitations and challenges associated with the application of AOPs in disinfection and antibiotic degradation are summarized. It aims to provide a starting point for future research efforts to facilitate the widespread use of advanced oxidation processes in the field of public health.

Enhanced Fenton-like oxidation (Vis/Fe(III)/Peroxydisulfate): The role of iron species and the Fe(III)-LVF complex in levofloxacin degradation

Traditional Fenton and Fenton-like processes are affected by the sluggish kinetics of Fe(II) regeneration and Fe(III) accumulation. This research revealed that the degradation efficiency of pollutants was significantly increased by adding Fe(III) to the Vis/PS system. A mechanism is proposed in which photosensitivity pollutants can boost Fe(III) to produce Fe(II) under visible light irradiation. Intriguingly, Fe(III) rapidly combines with LVF in aqueous environments to form Fe(III)-LVF complexes. This research confirms that Fe(III)-pollutant complexes are generated. The proportion of complexes are calculated using mathematical models. Furthermore, the production of Fe(IV) is verified in the Vis/PS/Fe(III) system, which also plays a vital role in boosting LVF degradation. Overall, this study provides comprehensive insights into the degradation mechanism of micropollutants, involving hydroxyl radical (OH∙), Fe(IV), and Fe(III)-LVF complexes, providing an efficient and green strategy for contaminant removal during wastewater treatment.

Efficient and sustainable photocatalytic inactivation of E. coli by an innovative immobilized Ag/TiO2 photocatalyst with peroxymonosulfate (PMS) under visible light

A novel catalytic system for effective photocatalytic inactivation of Escherichia coli (E. coli) was constructed by anchoring Ag nanoparticles (AgNPs) on silane coupling agent (SCA) pretreated TiO2 nano-tube arrays (Ag/SCA/TiO2NTAs). Morphology and structural analyses revealed that SCA could disperse AgNPs evenly on TiO2NTAs, thus inducing a superior surface plasmon resonance (SPR) effect. Ag/SCA/TiO2NTAs catalyst exhibited excellent inactivation performance when in the presence of peroxymonosulfate (PMS) and visible light (VL), with 6-log E. coli was completely inactivated within 60 min, which was 5.3, 12.5 and 13.2 times higher than that of Ag/SCA/TiO2NTAs/VL, PMS/VL and Ag/SCA/TiO2NTAs/PMS/dark systems, respectively. Additionally, the photocatalyst exhibited a highly reusable property, with the inactivation performance almost unchanged after ten cycles of uses with minimal Ag leaching. The inactivation mechanism analysis demonstrated that both radical (SO4•-, OH) and non-radical (h+, 1O2) pathways involved in E. coli inactivation, and SCA played a pivotal role in the production of reactive species. Chloride ions (Cl-) greatly enhanced the inactivation efficiency, while bicarbonate (HCO3-) and phosphate (H2PO4-) showed an inhibitory effect. Humic acid (HA) displayed a dual effect on inactivation performance, where the low concentration of HA facilitated the bacteria inactivation, while the higher dose suppressed bacteria inactivation. Moreover, the system exhibited excellent inactivation performance in tap water. This work first used SCA as the binder to fix AgNPs on TiO2NTAs for VL photocatalytic inactivation of bacteria with the assistance of PMS, which was expected to provide some insights into the practical treatment of drinking water.

Coupled Surface-Confinement Effect and Pore Engineering in a Single-Fe-Atom Catalyst for Ultrafast Fenton-like Reaction with High-Valent Iron-Oxo Complex Oxidation

The nanoconfinement effect in Fenton-like reactions shows great potential in environmental remediation, but the construction of confinement structure and the corresponding mechanism are rarely elucidated systematically. Herein, we proposed a novel peroxymonosulfate (PMS) activation system employing the single Fe atom supported on mesoporous N-doped carbon (FeSA-MNC, specific surface area = 1520.9 m2/g), which could accelerate the catalytic oxidation process via the surface-confinement effect. The degradation activity of the confined system was remarkably increased by 34.6 times compared to its analogue unconfined system. The generation of almost 100% high-valent iron-oxo species was identified via 18O isotope-labeled experiments, quenching tests, and probe methods. The density functional theory illustrated that the surface-confinement effect narrows the gap between the d-band center and Fermi level of the single Fe atom, which strengthens the charge transfer rate at the reaction interface and reduces the free energy barrier for PMS activation. The surface-confinement system exhibited excellent pollutant degradation efficiency, robust resistance to coexisting matter, and adaptation of a wide pH range (3.0-11.0) and various temperature environments (5-40 °C). Finally, the FeSA-MNC/PMS system could achieve 100% sulfamethoxazole removal without significant performance decline after 10,000-bed volumes. This work provides novel and significant insights into the surface-confinement effect in Fenton-like chemistry and guides the design of superior oxidation systems for environmental remediation.

Degradation of tetracycline by peroxymonosulfate activated with Mn0.85Fe2.15O4-CNTs: Key role of singlet oxygen

Tetracycline (TC) is a kind of electron-rich organic, and singlet oxygen (¹O₂) oxidative pathway-based advanced oxidation processes (AOPs) have represented outstanding selective degradation to such pollutants. In this paper, an excellent prepared strategy for ¹O₂ dominated catalyst was adopted. A catalyst composed of non-stoichiometric doping Mn-Fe bimetallic oxide supported on CNTs (0.3-Mn_0.85Fe_2.15O₄-CNTs) was synthesized and optimized by regulating the non-stoichiometric doping ratio of Mn & Fe and the loading amount of CNTs. Through optimization and control experiments, the optimized catalyst represented 94.9% of TC removal efficiency within 60 min in neutral condition under relatively low concentrations of Mn_0.85Fe_2.15O₄-CNTs (0.4 g/L) and PMS (0.8 mM). Through SEM and XRD characterization, Mn_0.85Fe_2.15O₄-CNTs was a hybrid of cubic Mn_0.85Fe_2.15O₄ uniformly dispersing on CNTs. By the characterization of XPS and FT-IR, more CO bonds and low-valent Mn (II) & Fe (II) appeared in Mn_0.85Fe_2.15O₄-CNTs. Reactive oxygen species (ROS) was determined by radical quenching experiments and electron spin resonance (EPR) spectroscopy, and ¹O₂ was verified to be the dominated ROS. The mechanism for PMS' activation was speculated, and more low-valent Mn (II) and Fe (II) contributed to the production of free-radical (•OH & SO₄^•-), while the reaction between PMS and the enhanced CO bond on Mn_0.85Fe_2.15O₄-CNTs played a crucial part in the generation of ¹O₂. In addition, through the comparative degradation of four different organics with distinct charge densities, the excellent selectivity of ¹O₂-based oxidative pathway to electron-rich pollutants was found. This paper supplied a good strategy to prepare catalyst for PMS activation to form a ¹O₂-dominated oxidative pathway.

Activation of periodate by N-doped iron-based porous carbon for degradation of sulfisoxazole: Significance of catalyst-mediated electron transfer mechanism

Periodate (PI) has recently been studied as an excellent oxidant in advanced oxidation processes, and its reported mechanism is mainly the formation of reactive oxygen species (ROS). This work presents an efficient approach using N-doped iron-based porous carbon (Fe@N-C) to activate periodate for the degradation of sulfisoxazole (SIZ). Characterization results indicated the catalyst has high catalytic activity, stable structure, and high electron transfer activity. In terms of degradation mechanism, it is pointed out that the non-radical pathway is the dominant mechanism. In order to prove this mechanism, we have carried out scavenging experiments, electron paramagnetic resonance (EPR) analysis, salt bridge experiments and electrochemical experiments, which demonstrate the occurrence of mediated electron transfer mechanism. Fe@N-C could mediate the electron transfer from organic contaminant molecules to PI, thus improving the efficiency of PI utilization, rather than simply inducing the activation of PI through Fe@N-C. The overall results of this study provided a new understanding into the application of Fe@N-C activated PI in wastewater treatment.

Activation of peroxymonosulfate with cobalt embedded in layered δ-MnO2 for degradation of dimethyl phthalate: Mechanisms, degradation pathway, and DFT calculation

The sulfate radical-based advanced oxidation processes (SR-AOPs) offer huge potential for the removal of organic pollutants. In this study, Co(II)-intercalated δ-MnO₂ (Co-δ-MnO₂) catalyst was successfully prepared by a simple cation exchange reaction. The obtained Co-δ-MnO₂ exhibited high catalytic performance for the removal of dimethyl phthalate (DMP) under the activation of peroxymonosulfate (PMS), with the degradation efficiency reaching 100% within 6 h. Experiments and theoretical calculations revealed that interlayer Co(II) provided unique active sites in Co-δ-MnO₂. In addition, radical and non-radical pathways were confirmed to play a role in Co-δ-MnO₂/PMS system. ^•OH, SO₄^{• ̶}, and ¹O₂ were identified to be the dominating reactive species in Co-δ-MnO₂/PMS system. This study provided new insights into the design of catalysts and laid a foundation for developing modifiable layered heterogeneous catalysts.

Nitrogen-doped carbon materials prepared using different organic precursors as catalysts of peroxymonosulfate to degrade sulfamethoxazole: First-time performance leading to the incorrect selection of the best catalyst

Nitrogen-doped carbon materials are effective catalysts for peroxymonosulfate (PMS) activation to eliminate organic contaminants. In this research, the activity of nitrogen-doped carbon materials was significantly improved by optimizing the carbon source, and the reusability of the catalyst is used to select the best catalyst instead of depending on the performance in the first use, for avoiding the "short-life" catalyst with great initial activity. Fixing ferric nitrate nonahydrate and melamine as the metal and nitrogen sources, four catalysts were prepared using glucose, glucosamine hydrochloride, dopamine, and trimesic acid as the carbon sources, respectively. Based on the performance in PMS activation for sulfamethoxazole (SMX) removal, in the first use, the activity was Fe-DA-CN (carbon source: dopamine) > Fe-BTC-CN (carbon source: trimesic acid) > Fe-GLU-CN (carbon source: glucosamine) > Fe-DGLU-CN (carbon source: glucose). With no washing for the second time use, the activity was Fe-BTC-CN (0.135 min^-1) ≫ Fe-DA-CN (0.037 min^-1) > Fe-GLU-CN (0.032 min^-1) > Fe-DGLU-CN (0.017 min^-1). The large specific surface area, superior graphitization, and high CO/C-N group content endow Fe-BTC-CN with high ability in PMS activity. Surface-bound radicals are responsible for SMX elimination, and most of the SMX degradation intermediates have lower ecotoxicity than SMX.

Engineering active heterojunction architecture with oxygenated-Co, Mo bimetallic sulfide heteronanosheet and graphene oxide for peroxymonosulfate activation

Bimetallic sulfides have distinctive catalytic property in activating peroxymonosulfate (PMS) for water remediation. Polyoxometalates as potential precursors have rarely been reported for the catalytic degradation of refractory organic pollutants. Herein, a composite catalyst of Co-Mo bimetallic sulfides supported onto graphene oxide (O-CoMoS/GO) with a heterojunction architecture was synthesized through a hydrothermal strategy with polyoxometalates ((NH₄)₄[Co^IIMo₆O₂₄H₆]·6H₂O) as the precursor and applied in the PMS activation. This material showed a superior performance for the catalytic degradation of the model organic pollutant, 4-chlorophenol (rapidly removed within 10 min with an apparent reaction rate constant of 0.5458 min^-1). O-CoMoS/GO outperformed most of the reported catalysts in terms of activity and had a strong tolerance towards common organic and inorganic compounds in water, and could perform well in different real water systems. Experimental and theoretical results indicated that the introduction of GO could achieve the enrichment of electrons on the metals and reduce the d band center (ε_d) of Co close to the Fermi level (ε_F), thereby facilitating the interfacial electron transfer process. The activation mechanism was due to the as-prepared bimetallic sulfides and the formation of heterojunction structure with GO, where Co(II) as the active center could be regenerated by the adjacent Mo element (as co-catalyst) and by gathering electrons from GO through the Co/Mo-O-C coupling. This work provides insights into the design of bimetallic sulfide catalysts in activating PMS for water remediation.

The interface design and properties enhancement of ZnO/cellulose composites: Branching fiber network to guide the assembly of ZnO flower

Using renewable biomass resources to regulate the growth and properties of catalysts is sustainable nanotechnology for achieving efficient photocatalysis and recycling. This work suggested a way to produce paper-based photocatalysts and resize the embedded zinc oxide (ZnO) flowers. The combination of experimental analysis and theoretical simulations demonstrated that small pores of the branching fiber network enhanced the interfacial interaction between ZnO flowers and cellulose fibers, thereby improving mechanical properties and optimizing flower structure. The interaction energy and electron density difference (EDD) simulation results demonstrated that the ZnO/cellulose interface structure shares significant attraction and charge transfer. Cellulose fibers ground for 20 cycles (CFG20) possessed dense branching fiber network and loaded with the smallest ZnO flowers, achieving a balance of strong mechanical properties and reaction efficiency. Remarkably, ZnO/CFG20 paper-based catalyst indicated strong photodegradation efficiency (100% for methyl orange, 100% for phenol, and 85.23% for aniline) and excellent reusability. This work will pave the way for the green regulation of catalysts.

New insights into engineering the core size and carbon shell thickness of Co@C core-shell catalysts for efficient and stable Fenton-like catalysis

Herein, we engineered the cobalt core size and carbon shell thickness of Co@C by molten salt electrolysis (MSE) to investigate the enhanced essence of decreasing core size as well as the shell thickness dependence-mediated transition of catalytic mechanisms. We found that the reaction activation energy (RAE) of Co@C/peroxymonosulfate (PMS) systems was intimately dependent on the core sizes for sulfamethoxazole (SMX) degradation. The smaller core size of 26 nm provided a lower RAE of 13.39 kJ mol^-1. In addition, increasing carbon shell thicknesses of Co@C altered the catalytic mechanisms from a radical pathway of SO₄^•- and •OH to to a non-radical pathway of ¹O₂ and electron-transfer process (ETP), which were verified by experimental results and density functional theory (DFT) calculations. Interestingly, increasing carbon shell thicknesses promoted the charge transfer between Co metal slab and carbon shell, increased the adsorption energy of PMS molecule on the Co@C slab, and decreased the length of OO, which favoured the occurrence of non-free radical processes.

Identifying the evolution of primary oxidation mechanisms and pollutant degradation routes in the electro-cocatalytic Fenton-like systems

Herein, electro-catalysis (EC) as the electron donor to accelerate the continuable Fe(III)/Fe(II) cycles in different inorganic peroxides (i.e., peroxymonosulfate (PMS), peroxydisulfate (PDS) and hydrogen peroxide (HP)) activation systems were established. These electro-cocatalytic Fenton-like systems exhibited an excellent degradation efficiency of sulfamethoxazole (SMX). A series of analytical and characterization methods including quenching experiments, probe experiments, and electron paramagnetic resonance spectrometry (EPR) were implemented to systematically sort out the source and yield of reactive oxygen species (ROS). A wide kind of ROS including hydroxyl radical (^•OH), singlet oxygen (¹O₂), and sulfate radical (SO₄^•-), which contributed 38%, 37%, and 24% were produced in EC/Fe(III)/PMS system, respectively. ^•OH was the dominant ROS in both EC/Fe(III)/PDS and EC/Fe(III)/HP processes. According to the analysis of SMX degradation routes and biotoxicity, abundant degradation pathways were identified in EC/Fe(III)/PMS process and lower environmental impact was achieved in EC/Fe(III)/HP process. The diversiform ROS of EC/Fe(III)/PMS system makes it exhibit greater environmental adaptability in complex water matrixes and excellent low-energy consumption performance in many organic pollutants degradation. Continuous flow treatment experiments proved that the three systems have great sustainability and practical application prospect. This work provides a strong basis for constructing suitable systems to achieve different treatment requirements.

Three-Dimensional Printing of Poly-L-Lactic Acid Composite Scaffolds with Enhanced Bioactivity and Controllable Zn Ion Release Capability by Coupling with Carbon-ZnO

Poly-L-lactic acid (PLLA) has gained great popularity with researchers in regenerative medicine owing to its superior biocompatibility and biodegradability, although its inadequate bioactivity inhibits the further use of PLLA in the field of bone regeneration. Zinc oxide (ZnO) has been utilized to improve the biological performance of biopolymers because of its renowned osteogenic activity. However, ZnO nanoparticles tend to agglomerate in the polymer matrix due to high surface energy, which would lead to the burst release of the Zn ion and, thus, cytotoxicity. In this study, to address this problem, carbon–ZnO (C–ZnO) was first synthesized through the carbonization of ZIF-8. Then, C–ZnO was introduced to PLLA powder before it was manufactured as scaffolds (PLLA/C–ZnO) by a selective laser sintering 3D printing technique. The results showed that the PLLA/C–ZnO scaffold was able to continuously release Zn ions in a reasonable range, which can be attributed to the interaction of Zn–N bonding and the shielding action of the PLLA scaffold. The controlled release of Zn ions from the scaffold further facilitated cell adhesion and proliferation and improved the osteogenic differentiation ability at the same time. In addition, C–ZnO endowed the scaffold with favorable photodynamic antibacterial ability, which was manifested by an efficient antibacterial rate of over 95%.

Antimicrobial photodynamic inactivation of wastewater microorganisms by halogenated indole derivative capped zinc oxide

Novel 5-bromoindole (5B)-capped zinc oxide (ZnO) nanoparticles (5BZN) were synthesized to improve the antibacterial, antibiofilm, and disinfection processes for the control of microorganisms in wastewater treatment. When exposed to 5BZN, the biofilm density and cell attachment were reduced dramatically, as measured by scanning electron microscopy (SEM). The 5BZN were also investigated for photodynamic treatment of multidrug-resistant (MDR) bacteria and toxicity. The combination of 5B and ZnO exhibited strong antibacterial and antibiofilm activities against MDR bacteria even at low doses (20 μg/mL). After 12.5 mW/cm² blue LED irradiation, the composite 5BZN showed superior photodynamic inactivation of two wastewater MDR, Enterobacter tabaci E2 and Klebsiella quasipneumoniae SC3, with cell densities reduced by 3.9 log CFU/mL and 4.7 log CFU/mL, respectively, after 120 min. The mechanism of bacterial inactivation was studied using a scavenging investigation, and H₂O₂ was identified mainly as the reactive species for bacterial inactivation. The 5BZN exhibited higher photodynamic inactivation towards the total coliform bacteria in wastewater effluents under a blue LED light intensity of 12.5 mW/cm² with almost complete inactivation of the coliform bacteria cells within 40 min. Furthermore, when 5BZN (100 mg/L) was added to the reactor, the level of tetracycline antibiotic degradation was increased by 63.6% after 120 min. The toxicity test, animal model nematode studies and seed germination assays, showed that 5BZN is harmless, highlighting its tremendous potential as a self-healing agent in large-scale photodynamic disinfection processes.

Synchronous removal of pharmaceutical contaminants and inactivation of pathogenic microorganisms in real hospital wastewater by electro-peroxone process

Herein, a highly efficient electro-peroxone (E-peroxone) process with graphite felt as ozone diffusion electrode (ODE) was developed for the synchronous removal of pharmaceutical contaminants and inactivation of pathogenic microorganisms in real hospital wastewater. Under optimal conditions, the total organic carbon (TOC) removal rate of real hospital wastewater could reach 93.9%. Importantly, 126 pharmaceutical compounds (antibiotics, antivirals, analgesics, antiepileptics, hormones, and others) were determined in hospital wastewater by using ultra performance liquid chromatography combined with quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS/MS). 110 pharmaceutical compounds could be efficiently degraded in E-peroxone system. Concurrently, the microbial community analysis through high-throughput sequencing showed that E-peroxone process exhibited an excellent disinfection effect in real hospital wastewater. Escherichia coli as a bacterial indicator could be completely inactivated in E-peroxone process·H2O2 and hydroxyl radical (OH) were found in E-peroxone system based on the results of chemical probe experiments and electron paramagnetic resonance (EPR) analysis. The in-situ generation of H2O2 from cathodic oxygen reduction in ODE can react with ozone to produce OH, and realize high efficiencies for the elimination of pharmaceutical and sterilization. This work established a green and effective way without extra addition of chemical reagents for high-efficiency treatment of real hospital wastewater.

Efficient degradation of organic pollutants by activated peroxymonosulfate over TiO2@C decorated Mg-Fe layered double oxides: Degradation pathways and mechanism

To activate peroxymonosulfate (PMS) is an efficient way for decomposition of non-biodegradable organic pollutants. Herein, Mg-Fe layered double oxides decorated with Ti₃C₂ MXene-derived TiO₂@C (T/LDOs) were fabricated to efficiently activate PMS for the degradation of Rhodamine B (RhB), acid red 1 (AR1), methylene blue (MB), and tetracycline hydrochloride (TC). The T/LDOs catalyst could decompose 95.8% of RhB, 94.8% of AR1, 84.9% of MB within 10 min, and 82.4% of TC within 60 min. The degradation rate constant of RhB in the optimal T/LDOs/PMS system was approximately 2.5 and 15.7 times higher than that in the Mg-Fe LDOs/PMS system and Mg-Fe LDH/PMS system, respectively. Importantly, the T/LDOs exhibited a wide working pH range (3.1-11.0) and high stability with low metal ions leaching, indicating its potential practical applications. Quenching experiments and electronic spin resonance results confirmed that both ^•O₂^- and ¹O₂ were the dominant active species in the T/LDOs/PMS system. In addition, the possible degradation pathway of RhB in the 5%-T/LDOs/PMS system was proposed. Finally, the catalytic mechanism study revealed that the T/LDOs with abundant surface hydroxyl groups and a certain amount of TiO₂@C facilitated the electron transfer between ≡Fe^(Ⅲ)‒OH complex and HSO₅^-, boosting the generation of ^•O₂^- and ¹O₂. This study provides an insight into exploiting highly efficient catalysts for PMS activation towards the degradation of organic pollutants.

Visible-Light-Driven Photocatalytic Inactivation of Bacteria, Bacteriophages, and Their Mixtures Using ZnO-Coated HDPE Beads as Floating Photocatalyst

Semiconductor materials used as photocatalysts are considered among the most effective ways to treat biologically polluted water. Certainly, efficiency depends on the selection of photocatalyst and its substrate, as well as the possibility of its application in a broader spectrum of light. In this study, a reactive magnetron sputtering technique was applied for the immobilisation of ZnO photocatalyst on the surface of HDPE beads, which were selected as the buoyant substrates for enhanced photocatalytic performance and easier recovery from the treated water. Moreover, the study compared the effect on the inactivation of the microorganism between ZnO-coated HDPE beads without Ni and with Ni underlayer. Crystal structure, surface morphology, and chemical bonds of as-deposited ZnO films were investigated by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy, respectively. Visible-light-induced photocatalytic treatment was performed on the Gram-negative and Gram-positive bacteria and bacteriophages PRD1, T4, and their mixture. Higher bacteria inactivation efficiency was obtained using the ZnO photocatalyst with Ni underlayer for the treatment of S. Typhimurium and M. Luteus mixtures. As for infectivity of bacteriophages, T4 alone and in the mixture with PRD1 were more affected by the produced photocatalyst, compared with PRD1.