Organic–inorganic hybrid nanoflowers: A novel host platform for immobilizing biomolecules

Enzyme immobilization with nanomaterials for hydrolysis of lignocellulosic biomass: Challenges and future Perspectives

Enzyme immobilization has emerged as a prodigious strategy in the enzymatic hydrolysis of lignocellulosic biomass (LCB) promising enhanced efficacy and stability of the enzymes. Further, enzyme immobilization on magnetic nanoparticles (MNPs) facilitates the easy recovery and reuse of biocatalysts. This results in the development of a nanobiocatalytic system, that serves as an eco-friendly and inexpensive LCB deconstruction approach. This review provides an overview of nanomaterials used for immobilization with special emphasis on the nanomaterial-enzyme interactions and strategies of immobilization. After the succinct outline of the immobilization procedures and supporting materials, a comprehensive assessment of the catalysis enabled by nanomaterial-immobilized biocatalysts for the conversion and degradation of lignocellulosic biomasses is provided by gathering state-of-the-art examples. The challenges and future directions associated with this technique providing a potential solution in the present article. Insight on the recent advancements in the process of nanomaterial-based immobilization for the hydrolysis of lignocellulosic biomass has also been highlighted in the article.

Magnetic nanoflowers: a hybrid platform for enzyme immobilization

The use of organic-inorganic hybrid nanoflowers as a support material for enzyme immobilization has gained significant attention in recent years due to their high stability, ease of preparation, and enhanced catalytic activity. However, a major challenge in utilizing these hybrid nanoflowers for enzyme immobilization is the difficulty in handling and separating them due to their low density and high dispersion. To address this issue, magnetic nanoflowers have emerged as a promising alternative enzyme immobilization platform due to their easy separation, structural stability, and ability to enhance catalytic efficiency. This review focuses on different methods for designing magnetic nanoflowers, as well as future research directions. Additionally, it provides examples of enzymes immobilized in the form of magnetic nanoflowers and their applications in environmental remediation, biosensors, and food industries. Finally, the review discusses possible ways to improve the material for enhanced catalytic activity, structural stability, and scalability.

Bioremediation of organic pollutants by laccase-metal-organic framework composites: A review of current knowledge and future perspective

Immobilized laccases are widely used as green biocatalysts for bioremediation of phenolic pollutants and wastewater treatment. Metal-organic frameworks (MOFs) show potential application for immobilization of laccase. Their unique adsorption properties provide a synergic effect of adsorption and biodegradation. This review focuses on bioremediation of wastewater pollutants using laccase-MOF composites, and summarizes the current knowledge and future perspective of their biodegradation and the enhancement strategies of enzyme immobilization. Mechanistic strategies of preparation of laccase-MOF composites were mainly investigated via physical adsorption, chemical binding, and de novo/co-precipitation approaches. The influence of architecture of MOFs on the efficiency of immobilization and bioremediation were discussed. Moreover, as sustainable technology, the integration of laccases and MOFs into wastewater treatment processes represents a promising approach to address the challenges posed by industrial pollution. The MOF-laccase composites can be promising and reliable alternative to conventional techniques for the treatment of wastewaters containing pharmaceuticals, dyes, and phenolic compounds. The detailed exploration of various immobilization techniques and the influence of MOF architecture on performance provides valuable insights for optimizing these composites, paving the way for future advancements in environmental biotechnology. The findings of this research have the potential to influence industrial wastewater treatment and promoting cleaner treatment processes and contributing to sustainability efforts.

Biomineralization-inspired synthesis of autologous cancer vaccines for personalized metallo-immunotherapy

Autologous cancer vaccines represent a promising therapeutic approach against tumor relapse. Herein, a concise biomineralization strategy was developed to prepare an immunostimulatory autologous cancer vaccine through protein antigen-mediated growth of flower-like manganese phosphate (MnP) nanoparticles. In addition to inheriting the cyclic guanosine monophosphate-adenosine monophosphate synthase (cGAS)-stimulator of interferon genes (STING)-activating capacity of Mn2+, the resulting ovalbumin (OVA)-loaded MnP (OVA@MnP) nanoparticles with superior stability and pH-responsiveness enabled efficient priming of antigen-specific CD8+ T cell expansion through promoting the endo/lysosome escape and subsequent antigen cross-presentation of OVA. Resultantly, OVA@MnP vaccines upon subcutaneous vaccination elicited both prophylactic and therapeutic effects against OVA-expressing B16-F10 melanoma. Furthermore, the biomineralized autologous cancer vaccines prepared from the whole tumor cell lysates of the dissected tumors suppressed the growth of residual tumors, particularly in combination with anti-PD-1 immunotherapy. This study highlights a simple biomineralization approach for the controllable synthesis of cGAS-STING-activating autologous cancer vaccines to suppress postsurgical tumor relapse.

Multi-MXene assisted large-scale manufacturing of electrochemical biosensors based on enzyme-nanoflower enhanced electrodes for the detection of H2O2 secreted from live cancer cells

In situ monitoring of H2O2 in cellular microenvironments plays a critical role in the early diagnosis and pretreatment of cancer, but is limited by the lack of efficient and low-cost strategies for the large-scale preparation of real-time biosensors. Herein, a universal strategy for MXene-based composite inks combined with a scalable screen-printing process is validated in large-scale manufacturing of electrochemical biosensors for in situ detection of H2O2 secreted from live cells. Compositing biocompatible carboxymethyl cellulose (CMCS) with excellent conductive MXene, a water-based ink electrode (MXene/CMCS) with tunable viscosity is efficiently printed with desirable printing accuracy. Subsequently, the MXene/CMCS@HRP electrochemical biosensor exhibits stable electrochemical performance through HRP nanoflower modification, showing rapid electron transport and high electrocatalytic capacity, and demonstrating a low limit of detection (0.29 μM) with a wide linear detection range (0.5 μM-3 mM), superior sensitivity (56.45 μA mM-1 cm-2), long-term stability and high anti-interference ability. Moreover, this electrochemical biosensor is effectively employed for in situ detection of H2O2 secreted from HeLa cells, revealing good biocompatibility and outstanding biosensing capability. This proposed strategy not only extends the possibility of low-cost biomedical devices, but also provides a promising approach for early diagnosis and treatment of cancer.

Nanodiamonds and natural deep eutectic solvents as potential carriers for lipase

This study investigates the use of nanodiamonds (ND) as a promising carrier for enzyme immobilization and compares the effectiveness of immobilized and native enzymes. Three different enzyme types were tested, of which Rhizopus niveus lipase (RNL) exhibited the highest relative activity, up to 350 %. Under optimized conditions (1 h, pH 7.0, 40 °C), the immobilized ND-RNL showed a maximum specific activity of 0.765 U mg-1, significantly higher than native RNL (0.505 U mg-1). This study highlights a notable enhancement in immobilized lipase; furthermore, the enzyme can be recycled in the presence of a natural deep eutectic solvent (NADES), retaining 76 % of its initial activity. This aids in preserving the native conformation of the protein throughout the reusability process. A test on brine shrimp revealed that even at low concentrations, ND-RNL had minimal toxicity, indicating its low cytotoxicity. The in silico molecular dynamics simulations performed in this study offer valuable insights into the mechanism of interactions between RNL and ND, demonstrating that RNL immobilization onto NDs enhances its efficiency and stability. All told, these findings highlight the immense potential of ND-immobilized RNL as an excellent candidate for biological applications and showcase the promise of further research in this field.

Enzyme hybrid nanoflowers and enzyme@metal-organic frameworks composites: fascinating hybrid nanobiocatalysts

Hybrid nanomaterials have recently emerged as a new interface of nanobiocatalysis, serving as a host platform for enzyme immobilization. Enzyme immobilization in inorganic crystal nanoflowers and metal-organic frameworks (MOFs) has sparked the bulk of scientific interest due to their superior performances. Many breakthroughs have been achieved recently in the preparation of various types of enzyme@MOF and enzyme-hybrid nanoflower composites. However, it is unfortunate that there are few reviews in the literature related to enzyme@MOF and enzyme-hybrid nanoflower composites and their improved synthesis strategies and their applications in biotechnology. In this review, innovative synthetic strategies for enzyme@MOF composites and enzyme-hybrid nanoflower composites are discussed. Enzyme@MOF composites and enzyme-hybrid nanoflower composites are reviewed in terms of biotechnological applications and potential research directions. We are convinced that a fundamental study and application of enzyme@MOF composites and enzyme-hybrid nanoflower composites will be understood by the reader as a result of this work. The summary of different synthetic strategies for enzyme@MOF composites and enzyme-hybrid nanoflower composites and the improvement of their synthetic strategies will also benefit the readers and provide ideas and thoughts in the future research process.

Laccase immobilization and its degradation of emerging pollutants: A comprehensive review

The chronic lack of effective disposal of pollutants has resulted in the detection of a wide variety of EPs in the environment, with concentrations high enough to affect ecological health. Laccase, as a versatile oxidase capable of catalyzing a wide range of substrates and without producing toxic by-products, is a potential candidate for the biodegradation of pollutants. Immobilization can provide favorable protection for free laccase, improve the stability of laccase in complex environments, and greatly enhance the reusability of laccase, which is significant in reducing the cost of industrial applications. This study introduces the properties of laccase and subsequently elaborate on the different support materials for laccase immobilization. The research advances in the degradation of EDs, PPCPs, and PAHs by immobilized laccase are then reviewed. This review provides a comprehensive understanding of laccase immobilization, as well as the advantages of various support materials, facilitating the development of more economical and efficient immobilization systems that can be put into practice to achieve the green degradation of EPs.

Immobilizing amyloglucosidase on inorganic hybrid nanoflowers to prepare time-temperature integrators for chilled pork quality monitoring

Time-temperature integrators (TTIs) based on amyloglucosidase@Cu3(PO4)2 nanoflowers (AMG@NFs) were developed to monitor the freshness of chilled pork. AMG@NFs were synthesized through biomineralization, resulting in enhanced activity and stability of amyloglucosidase. The TTI prototypes were constructed by hydrolyzing maltodextrin with AMG@NFs. The hue of the TTIs varied from burgundy to colorless, and the discoloration kinetics were investigated. The deterioration process of chilled pork was explored, and the activation energy (Ea) was calculated as 67.32 ± 5.13 kJ/mol. To optimize costs and match TTIs with food, 6#TTI was selected to predict the quality of chilled pork. The dynamic temperature test revealed that the cumulative effective temperatures of chilled pork and 6#TTI were 289.34 K and 290.05 K, respectively, which indicated that 6#TTI was highly reliable and suitable for monitoring the actual chilled pork system. This study offers a new approach for real-time and accurate visual monitoring of chilled pork quality.

Various Strategies for the Immobilization of a Phospholipase C from Bacillus cereus for the Modulation of Its Biochemical Properties

In this study, the effect of various immobilization methods on the biochemical properties of phospholipase C (PLC) from Bacillus cereus obtained from the oily soil located in Sfax, Tunisia, was described. Different supports were checked: octyl sepharose, glyoxyl agarose in the presence of N-acetyl cysteine, and Q-sepharose. In the immobilization by hydrophobic adsorption, a hyperactivation of the PLCBc was obtained with a fold of around 2 times. The recovery activity after immobilization on Q-sepharose and glyoxyl agarose in the presence of N-acetyl cysteine was 80% and 58%, respectively. Furthermore, the biochemical characterization showed an important improvement in the three immobilized enzymes. The performance of the various immobilized PLCBc was compared with the soluble enzyme. The derivatives acquired using Q-sepharose, octyl sepharose, and glyoxyl agarose were stable at 50 °C, 60 °C, and 70 °C. Nevertheless, the three derivatives were more stable in a large range of pH than the soluble enzyme. The three derivatives and the free enzyme were stable in 50% (v/v) ethanol, hexane, methanol, and acetone. The glyoxyl agarose derivative showed high long-term storage at 4 °C, with an activity of 60% after 19 days. These results suggest the sustainable biotechnological application of the developed immobilized enzyme.

Recent Progress and Future Prospects of Laccase Immobilization on MOF Supports for Industrial Applications

Laccase is a multicopper oxidoreductase enzyme that can oxidize organics such as phenolic compounds. Laccases appear to be unstable at room temperature, and their conformation often changes in a strongly acidic or alkaline environment, making them less effective. Therefore, rationally linking enzymes with supports can effectively improve the stability and reusability of native enzymes and add important industrial value. However, in the process of immobilization, many factors may lead to a decrease in enzymatic activity. Therefore, the selection of a suitable support can ensure the activity and economic utilization of immobilized catalysts. Metal-organic frameworks (MOFs) are porous and simple hybrid support materials. Moreover, the characteristics of the metal ion ligand of MOFs can enable a potential synergistic effect with the metal ions of the active center of metalloenzymes, enhancing the catalytic activity of such enzymes. Therefore, in addition to summarizing the biological characteristics and enzymatic properties of laccase, this article reviews laccase immobilization using MOF supports, as well as the application prospects of immobilized laccase in many fields.

Experimental and Computational Analysis of Synthesis Conditions of Hybrid Nanoflowers for Lipase Immobilization

This work presents a framework for evaluating hybrid nanoflowers using Burkholderia cepacia lipase. It was expanded on previous findings by testing lipase hybrid nanoflowers (hNF-lipase) formation over a wide range of pH values (5-9) and buffer concentrations (10-100 mM). The free enzyme activity was compared with that of hNF-lipase. The analysis, performed by molecular docking, described the effect of lipase interaction with copper ions. The morphological characterization of hNF-lipase was performed using scanning electron microscopy. Fourier Transform Infrared Spectroscopy performed the physical-chemical characterization. The results show that all hNF-lipase activity presented values higher than that of the free enzyme. Activity is higher at pH 7.4 and has the highest buffer concentration of 100 mM. Molecular docking analysis has been used to understand the effect of enzyme protonation on hNF-lipase formation and identify the main the main binding sites of the enzyme with copper ions. The hNF-lipase nanostructures show the shape of flowers in their micrographs from pH 6 to 8. The spectra of the nanoflowers present peaks typical of the amide regions I and II, current in lipase, and areas with P-O vibrations, confirming the presence of the phosphate group. Therefore, hNF-lipase is an efficient biocatalyst with increased catalytic activity, good nanostructure formation, and improved stability.

Immobilization of Thermoplasma acidophilum Glucose Dehydrogenase and Isocitrate Dehydrogenase Through Enzyme-Inorganic Hybrid Nanocrystal Formation

The development of green catalysts, specifically biocatalysts, is crucial for building a sustainable society. To enhance the versatility of biocatalysts, the immobilization of enzymes plays a vital role as it improves their recyclability and robustness. As target enzymes to immobilize, glucose dehydrogenases and carboxylases are particularly important among various kinds of enzymes due to their involvement in two significant reactions: regeneration of the reduced form of coenzyme required for various reactions, and carboxylation reactions utilizing CO2 as a substrate, respectively. In this study, we immobilized Thermoplasma acidophilum glucose dehydrogenase (TaGDH) and T. acidophilum isocitrate dehydrogenase (TaIDH) using a previously reported method involving the formation of enzyme-inorganic hybrid nanocrystals, in the course of our continuing study focusing on carboxylation catalyzed by the free form of TaGDH and TaIDH. Subsequently, we investigated the properties of the resulting immobilized enzymes. Our results indicate the successful immobilization of TaGDH and TaIDH through the formation of hybrid nanocrystals utilizing Mn2+. The immobilization process enhanced TaIDH activity, up to 211%, while TaGDH retained 71% of its original activity. Notably, the immobilized TaGDH exhibited higher activity at temperatures exceeding 87 °C than the free TaGDH. Moreover, these immobilized enzymes could be recycled. Finally, we successfully utilized the immobilized enzymes for the carboxylation of 2-ketoglutaric acid under 1 MPa CO2. In conclusion, this study represents the first immobilization of TaGDH and TaIDH using the hybrid nanocrystal forming method. Furthermore, we achieved significant activity enhancement of TaIDH through immobilization and demonstrated the recyclability of the immobilized enzymes.

Hyperactivation of lipases by immobilization on superhydrophobic graphene quantum dots inorganic hybrid nanoflower

Various nanoflowers are synthesized for enzyme immobilization. In order to increase the activity of nanoflowers, in this study, 3D flower-like structured organic-inorganic hybrid nanoflowers (hNFs) with various lipases Rhizomucor miehei lipase (RML), Candida antarctica lipase B (CALB), Humicola insolens lipase (HIL), Thermomyces lanuginosus lipase (TLL), Eversa® Transform 2.0 (ET) a genetically modified enzyme derived of TLL and graphene quantum dots (GQDs) were prepared and characterized.Lipase hNFs [lipase-(Cu/Co)3(PO4)2] and lipase@GQDs hNFs [lipase@GQDs-(Cu/Co)3(PO4)2] were straightforwardly prepared through mixing with metal ion (Cu2+or Co2+) aqueous solutions with or without GQDs. The ET@GQDs-(Cu)3(PO4)2 hNFs demonstrated 687 % higher activity than ET-(Cu)3(PO4)2 hNFs and 650 % higher activity than the free ET. Similar results were also observed with other lipase hybrid nanoflowers. For example, TLL@GQDs-(Cu)3(PO4)2 hNFs exhibited a 557 % higher activity than TLL-(Cu)3(PO4)2 hNFs and a 463 % higher activity than free TLL. Additionally, TLL@GQDs-(Co)3(PO4)2 hNFs showed a 141 % higher activity than TLL-(Co)3(PO4)2 hNFs and a 304 % higher activity than free TLL. Upon examining pH and thermal stability, it was revealed that lipase@GQDs hNFs exhibited higher activity compared to free lipase and other hNFs without GQDs. The effect of metal ions, enzyme concentrations and amount of GQDs on the morphology and enzyme activity of the lipase-hNFs was examined.

Bovine Serum Albumin - Hydroxyapatite Nanoflowers as Potential Local Drug Delivery System of Ciprofloxacin

Introduction

Hybrid nanoflowers are structures consisting of organic (enzymes, proteins, nucleic acids) and inorganic components (mostly metal phosphates) with a flower-like hierarchical structure. Novel hybrid nanoflowers based on bovine serum albumin (BSA) and hydroxyapatite (HA) were obtained and characterized. Study on BSA-HA nanoflowers as potential drug delivery system is reported for the first time.

Methods

Embedding ciprofloxacin in the structure of hybrid nanoflowers was confirmed by ATR-FTIR and thermogravimetric analysis. The inorganic phase of the nanoflowers was determined by X-ray diffraction. UV‒Vis spectroscopy was used to evaluate the release profiles of ciprofloxacin from nanoflowers in buffer solutions at pH 7.4 and 5. The agar disk diffusion method was used to study the antibacterial activity of the synthesized nanoflowers against Staphylococcus aureus and Pseudomonas aeruginosa.

Results

Bovine serum albumin - hydroxyapatite nanoflowers were obtained with diameters of ca. 1-2 µm. The kinetics of ciprofloxacin release from nanoflowers were described by the Korsmeyer-Peppas model. The antibacterial activity of the synthesized nanoflowers was demonstrated against S. aureus and P. aeruginosa, two main pathogens found in osteomyelitis.

Conclusion

The formulated nanoflowers may act as an efficient local antibiotic delivery system. Due to the use of nonhazardous, biodegradable components and benign synthesis, hybrid nanoflowers are very promising drug delivery systems that could be applied in the treatment of skeletal system infections.

Nanosilver Embedded in a Magnetosome Nanoflower to Enhance Antibacterial Activity for Wound Dressing Applications

The natural biofilm on magnetosomes obtained from the biomineralization of magnetotactic bacteria, which replaced a complex chemical modification process on the surface of Fe3O4, can be used as the organic component and copper(II) ions as the inorganic component to form organic-inorganic nanoflowers in phosphate systems. Characterization by scanning electron microscopy, Fourier transform infrared spectroscopy, and vibrating-sample magnetometry proved that magnetic nanoflowers loaded with silver ions (Ag/MN-Cu×NFs) were successfully fabricated. In vitro antibacterial experiments demonstrated that Ag/MN-Cu×NFs displayed strong antibacterial effects against Escherichia coli and Staphylococcus aureus, with minimum inhibitory concentrations of 10 and 80 μg/mL, respectively. Ag/MN-Cu×NFs, which possessed good biocompatibility as confirmed by cytotoxicity and hemolysis tests, were able to promote wound healing in the face of bacterial infection in vivo without causing toxicity to major organs. Therefore, magnetosomes as a natural carrier have great application potential in the synthesis of multifunctional magnetosomes by direct hybridization with a target substance.

Novel biocatalysts based on enzymes in complexes with nano- and micromaterials

In today's world, there is a wide array of materials engineered at the nano- and microscale, with numerous applications attributed to these innovations. This review aims to provide a concise overview of how nano- and micromaterials are utilized for enzyme immobilization. Enzymes act as eco-friendly biocatalysts extensively used in various industries and medicine. However, their widespread adoption faces challenges due to factors such as enzyme instability under different conditions, resulting in reduced effectiveness, high costs, and limited reusability. To address these issues, researchers have explored immobilization techniques using nano- and microscale materials as a potential solution. Such techniques offer the promise of enhancing enzyme stability against varying temperatures, solvents, pH levels, pollutants, and impurities. Consequently, enzyme immobilization remains a subject of great interest within both the scientific community and the industrial sector. As of now, the primary goal of enzyme immobilization is not solely limited to enabling reusability and stability. It has been demonstrated as a powerful tool to enhance various enzyme properties and improve biocatalyst performance and characteristics. The integration of nano- and microscale materials into biomedical devices is seamless, given the similarity in size to most biological systems. Common materials employed in developing these nanotechnology products include synthetic polymers, carbon-based nanomaterials, magnetic micro- and nanoparticles, metal and metal oxide nanoparticles, metal-organic frameworks, nano-sized mesoporous hydrogen-bonded organic frameworks, protein-based nano-delivery systems, lipid-based nano- and micromaterials, and polysaccharide-based nanoparticles.

Recent advances in nanoflowers: compositional and structural diversification for potential applications

In recent years, nanoscience and nanotechnology have emerged as promising fields in materials science. Spectroscopic techniques like scanning tunneling microscopy and atomic force microscopy have revolutionized the characterization, manipulation, and size control of nanomaterials, enabling the creation of diverse materials such as fullerenes, graphene, nanotubes, nanofibers, nanorods, nanowires, nanoparticles, nanocones, and nanosheets. Among these nanomaterials, there has been considerable interest in flower-shaped hierarchical 3D nanostructures, known as nanoflowers. These structures offer advantages like a higher surface-to-volume ratio compared to spherical nanoparticles, cost-effectiveness, and environmentally friendly preparation methods. Researchers have explored various applications of 3D nanostructures with unique morphologies derived from different nanoflowers. The nanoflowers are classified as organic, inorganic and hybrid, and the hybrids are a combination thereof, and most research studies of the nanoflowers have been focused on biomedical applications. Intriguingly, among them, inorganic nanoflowers have been studied extensively in various areas, such as electro, photo, and chemical catalysis, sensors, supercapacitors, and batteries, owing to their high catalytic efficiency and optical characteristics, which arise from their composition, crystal structure, and local surface plasmon resonance (LSPR). Despite the significant interest in inorganic nanoflowers, comprehensive reviews on this topic have been scarce until now. This is the first review focusing on inorganic nanoflowers for applications in electro, photo, and chemical catalysts, sensors, supercapacitors, and batteries. Since the early 2000s, more than 350 papers have been published on this topic with many ongoing research projects. This review categorizes the reported inorganic nanoflowers into four groups based on their composition and structure: metal, metal oxide, alloy, and other nanoflowers, including silica, metal-metal oxide, core-shell, doped, coated, nitride, sulfide, phosphide, selenide, and telluride nanoflowers. The review thoroughly discusses the preparation methods, conditions for morphology and size control, mechanisms, characteristics, and potential applications of these nanoflowers, aiming to facilitate future research and promote highly effective and synergistic applications in various fields.

Controllable Synthesis of Hemoglobin-Metal Phosphate Organic-Inorganic Hybrid Nanoflowers and Their Applications in Biocatalysis

In recent years, organic-inorganic hybrid nanoflower technology has become an effective method for enzyme immobilization. Here, seven hierarchical flower-like hemoglobin-phosphate organic-inorganic hybrid nanomaterials (Hb-M3(PO4)2·nH2O HNFs) were synthesized through an improved universal one-pot wet-chemical method, with Ca2+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+ and Zn2+ as inorganic components. In this synthesis process, the metal cations are successively involved in the coordination reaction with Hb and the metathesis reaction to generate phosphate precipitation. The coordination ability of metal cations and the generation rate of phosphate precipitations were evaluated, then the progress of the two chemical reactions was controlled synchronously by adjusting the phosphate buffer (PB) concentration, and finally a flower-like structure conducive to substrate diffusion and transport was obtained. Due to the conformational transformation of hemoglobin and the abundant Cu2+/Fe3+ active sites, the hemoglobin-Cu3(PO4)2·3H2O nanoflowers have extremely high catalytic activity, which is ∼14 times that of Hb. Importantly, this method is suitable for the monometallic-ionic, polymetallic-ionic and polyvalent metal-ion nanoflowers, which broadens the chemical composition and structural diversity of nanoflowers.

Preparation and investigation of novel endopeptidase-exopeptidase co-immobilized nanoflowers with improved cascade hydrolysis

Enzymatic hydrolysis is a promising approach for protein and food processing. However, the efficiency of this approach is constrained by the self-hydrolysis, self-agglomeration of free enzymes and the limited applicability resulted from enzymes' selectivityt. Here, novel organic-inorganic hybrid nanoflowers (AY-10@AXH-HNFs) were prepared by coordinating Cu2+ with both endopeptidase of PROTIN SD-AY10 and exopeptidase of Prote AXH. The results indicate that the AY-10@AXH-HNFs exhibited 4.1 and 9.6 times higher catalytic activity than free Prote AXH and PROTIN SD-AY10, respectively, for the enzymatic hydrolysis of N-benzoyl-L-arginine ethyl ester (BAEE). The kinetic parameters of Km, Vmax and Kcat/Km by AY-10@AXH-HNFs were determined to be 0.6 mg/mL, 6.8 mL·min/mg and 6.1 mL/(min·mg), respectively, surpassing the values obtained from free endopeptidase and exopeptidase. Furthermore, the ability of AY-10@AXH-HNFs to retain 41 % of their initial catalytic activity after undergoing 5 cycles of repeated use confirmed their stability and reusability. This study introduces a novel approach of co-immobilizing endopeptidase and exopeptidase on nanoflowers, resulting in significantly enhanced stability and reusability of the protease in catalytic applications.

Reusable carboxylesterase immobilized in ZIF for efficient degradation of chlorpyrifos in enviromental water

The past few decades have witnessed biodegradation of pesticides as a significant method in remediation of the environment for its specificity, efficiency and biocompatibility. However, the tolerability and recyclability of the enzymes in pesticide degradation and the development of enzymes that biodegrad pesticides are still urgent problems to be solved so far. Herein, a novel hyper-thermostable and chlorpyrifos-hydrolyzing carboxylesterase EstC was immobilized by biomineralization using zeolitic imidazolate framework (ZIF), one of the metal-organic frameworks (MOFs) with highly diverse structure and porosity. Compared with free enzyme, EstC@ZIF with a cruciate flower-like morphology presented scarcely variation in catalytic efficiency and generally improved the tolerance to organic solvents or detergents. Furthermore, there was scarcely decrease in the catalytic efficiency of EstC@ZIF and it also showed good reusability with about 50% residual activity after 12 continuous uses. Notably, EstC@ZIF could be used in actual water environment with an excellent value of degradation rate of 90.27% in 120 min, and the degradation efficiency remained about 50% after 9 repetitions. The present strategy of immobilizing carboxylesterase to treat pesticide-contaminated water broadens the method of immobilized enzymes on MOFs, and envisions its recyclable applicability in globe environmental remediation.

Recent Advances in the Biocatalytic Mitigation of Emerging Pollutants: A Comprehensive Review

The issue of environmental pollution has been worsened by the emergence of new contaminants whose morphology is yet to be fully understood. Several techniques have been adopted to mitigate the pollution effects of these emerging contaminants, and bioremediation involving plants, microbes, or enzymes has stood out as a cost-effective and eco-friendly approach. Enzyme-mediated bioremediation is a very promising technology as it exhibits better pollutant degradation activity and generates less waste. However, this technology is subject to challenges like temperature, pH, and storage stability, in addition to recycling difficulty as it is arduous to isolate them from the reaction media. To address these challenges, the immobilization of enzymes has been successfully applied to ameliorate the activity, stability, and reusability of enzymes. Although this has significantly increased the uses of enzymes over a wide range of environmental conditions and facilitated the use of smaller bioreactors thereby saving cost, it still comes with additional costs for carriers and immobilization. Additionally, the existing immobilization methods have their individual limitations. This review provides state-of-the-art information to readers focusing on bioremediation using enzymes. Different parameters such as: the sustainability of biocatalysts, the ecotoxicological evaluation of transformation contaminants, and enzyme groups used were reviewed. The efficacy of free and immobilized enzymes, materials and methods for immobilization, bioreactors used, challenges to large-scale implementation, and future research needs were thoroughly discussed.

Immobilized short-chain dehydrogenase/reductase on Fe3O4 particles acts as a magnetically recoverable biocatalyst component in patulin bio-detoxification system

Patulin is one of the most important mycotoxins that contaminates fruit-derived products and causes acute or chronic toxicity in humans. In the present study, a novel patulin-degrading enzyme preparation was developed by taking a short-chain dehydrogenase/reductase and covalently linking it to dopamine/polyethyleneimine co-deposited magnetic Fe₃O₄ particles. Optimum immobilization provided 63% immobilization efficiency and 62% activity recovery. Moreover, the immobilization protocol substantially improved thermal and storage stabilities, proteolysis resistance, and reusability. Using reduced nicotinamide adenine dinucleotide phosphate as a cofactor, the immobilized enzyme exhibited a detoxification rate of 100% in phosphate-buffered saline and a detoxification rate of more than 80% in apple juice. The immobilized enzyme did not cause adverse effects on juice quality and could be magnetically separated quickly after detoxification to ensure convenient recycling. Moreover, it did not exhibit cytotoxicity against a human gastric mucosal epithelial cell line at a concentration of 100 mg/L. Consequently, the immobilized enzyme as a biocatalyst had the characteristics of high efficiency, stability, safety, and easy separation, establishing the first step in building a bio-detoxification system to control patulin contamination in juice and beverage products.

Effective remediation and decontamination of organophosphorus compounds using enzymes: From rational design to potential applications

Organophosphorus compounds (OPs) have been widely used in agriculture for decades because of their high insecticidal efficiency, which maintains and increases crop yields worldwide. More importantly, OPs, as typical chemical warfare agents, are a serious concern and significant danger for military and civilian personnel. The widespread use of OPs, superfluous and unreasonable use, has caused great harm to the environment and food chain. Developing efficient and environmentally friendly solutions for the decontamination of OPs is a long-term challenge. Microbial enzymes show potential application as natural and green biocatalysts. Thus, utilizing OP-degrading enzymes for environmental decontamination presents significant advantages, as these enzymes can rapidly hydrolyze OPs; are environmentally friendly, nonflammable, and noncorrosive; and can be discarded safely and easily. Here, the properties, structure and catalytic mechanism of various typical OP-degrading enzymes are reviewed. The methods and effects utilized to improve the expression level, catalytic performance and stability of OP-degrading enzymes were systematically summarized. In addition, the immobilization of OP-degrading enzymes was explicated emphatically, and the latest progress of cascade reactions based on immobilized enzymes was discussed. Finally, the latest applications of OP-degrading enzymes were summarized, including biosensors, nanozyme mimics and medical detoxification. This review provides guidance for the future development of OP-degrading enzymes and promotes their application in the field of environmental bioremediation and medicine.

Octenyl succinic anhydride modified starch with excellent emulsifying properties prepared by selective hydrolysis of supramolecular immobilized enzyme

Octenyl succinic anhydride modified starch is a common green and safe emulsifier. Although the conventional pretreatment method of free enzyme hydrolysis increases the hydroxyl content on the starch surface, thus improving the grafting degree of octenyl succinic anhydride and the amphiphilicity of the modified starch, the amylose and amylopectin structures are indiscriminately hydrolyzed, reducing the emulsion stability of modified starch. In this work, α-amylase organic-inorganic hybrid nanoflower biocatalyst is designed and synthesized for pretreatment of synthetic octenyl succinic anhydride modified starch. The α-amylase organic-inorganic hybrid nanoflower biocatalyst with a unique micro-nano spatial structure can selectively hydrolyze the amylopectin and protect the amylose of starch. The amylose ratio of starch pretreated by nanoflower biocatalyst is about twice that of starch pretreated by free enzyme, reaching 22.62 %. Meanwhile, the granular structure of starch is not damaged. The obtained octenyl succinic anhydride modified starch exhibits a high degree of substitution, up to 0.0213. The emulsion prepared with this modified starch maintains excellent emulsifying properties and stability. This study provides a novel strategy for the preparation of octenyl succinic anhydride modified starch with excellent emulsifying properties, which promote the application of octenyl succinic anhydride modified starch in food, pharmaceutical and cosmetic industries.

A functional nanoflower based lateral flow immunoassay for the rapid and robust detection of pathogens

In the face of complex public health emergencies and various social medical needs in new situations, it is urgent to establish rapid detection technology for the early detection of pathogens to control their spread and minimize the resultant health and societal impact. Point-of-care testing (POCT) that allows rapid, on-site, and affordable detection and monitoring of health conditions at home or away from clinical labs has received increasing attention in modern medicine. In this work, we have synthesized multifunctional magainin I-human chorionic gonadotropin (hCG)-Cu₃(PO₄)₂ nanoflowers and demonstrated a new strategy for the fast diagnosis of pathogenic microorganisms by combining functional nanoflowers with a lateral flow immunoassay device. The prepared multifunctional nanoflowers immobilized many signal molecules, which solves the poor sensitivity of traditional lateral flow strips and realizes the highly sensitive detection of pathogenic microorganisms ("accurate detection"). Besides, this method can complete the rapid transformation of commercial-off-the-shelf lateral flow strips and realize the fast diagnosis of target analytes in case of an outbreak ("fast detection"). Therefore, the established rapid and highly sensitive lateral flow immunoassay for the detection of pathogenic microorganisms will effectively improve the early diagnosis efficiency of infectious diseases caused by pathogenic microorganisms and shorten the diagnosis time of diseases.

Immobilization of Bacillus amyloliquefaciens protease "Neutrase" as hybrid enzyme inorganic nanoflower particles: A new biocatalyst for aldol-type and multicomponent reactions

Organic-inorganic hybrid nanoflowers (hNFs) with commercial protease "Neutrase" is proposed and characterized as efficient and green biocatalysts for promiscuous catalysis in aldol-type and multicomponent reactions. Neutrase hNFs [Neutrase-(Cu/Ca/Co/Mn)₃(PO₄)₂] are straightforwardly prepared through mixing metal ion (Cu²⁺, Ca²⁺, Co²⁺ or Mn²⁺) aqueous solutions with Neutrase in phosphate buffer (pH 7.4, 10 mM) resulting in precipitation (3 days). The hNFs were characterized by various techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX), element mapping, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In SEM images, the metal-Neutrase complexes revealed flower-like or granular structures after hybridization. The effect of metal ions and enzyme concentrations on the morphology and enzyme activity of the Neutrase-hNFs was examined. The synthesized Neutrase-Mn hNFs showed superior activity and stability compared to free Neutrase. Traditional organic CC coupling reactions such as aldol condensation, decarboxylative aldol, Knoevenagel, Hantzsch-type reactions and synthesis of 4H-pyran derivatives were used to test the generality and scope of Neutrase promiscuity, while optimizing conditions for the Neutrase-Mn hNF biocatalyst. Briefly, Neutrase-Mn₃(PO₄)₂ hNFs showed excellent enzyme activity, stability and reusability, qualifying as effective reusable catalysts for coupling reactions under mild conditions.

Nanostructured supports for multienzyme co-immobilization for biotechnological applications: Achievements, challenges and prospects

The synergistic combination of current biotechnological and nanotechnological research has turned to multienzyme co-immobilization as a promising concept to design biocatalysis engineering. It has also intensified the development and deployment of multipurpose biocatalysts, for instance, multienzyme co-immobilized constructs, via biocatalysis/protein engineering to scale-up and fulfil the ever-increasing industrial demands. Considering the characteristic features of both the loaded multienzymes and nanostructure carriers, i.e., selectivity, specificity, stability, resistivity, induce activity, reaction efficacy, multi-usability, high catalytic turnover, optimal yield, ease in recovery, and cost-effectiveness, multienzyme-based green biocatalysts have become a powerful norm in biocatalysis/protein engineering sectors. In this context, the current state-of-the-art in enzyme engineering with a synergistic combination of nanotechnology, at large, and nanomaterials, in particular, are significantly contributing and providing robust tools to engineer and/or tailor enzymes to fulfil the growing catalytic and contemporary industrial needs. Considering the above critics and unique structural, physicochemical, and functional attributes, herein, we spotlight important aspects spanning across prospective nano-carriers for multienzyme co-immobilization. Further, this work comprehensively discuss the current advances in deploying multienzyme-based cascade reactions in numerous sectors, including environmental remediation and protection, drug delivery systems (DDS), biofuel cells development and energy production, bio-electroanalytical devices (biosensors), therapeutical, nutraceutical, cosmeceutical, and pharmaceutical oriented applications. In conclusion, the continuous developments in nano-assembling the multienzyme loaded co-immobilized nanostructure carriers would be a unique way that could act as a core of modern biotechnological research.

Biodegradation of Aflatoxin B1 in Peanut Oil by an Amphipathic Laccase-Inorganic Hybrid Nanoflower

Aflatoxin B₁ (AFB₁) contamination is an important issue for the safety of edible oils. Enzymatic degradation is a promising approach for removing mycotoxins in a specific, efficient, and green manner. However, enzymatic degradation of mycotoxins in edible oil is challenging as a result of the low activity and stability of the enzyme. Herein, a novel strategy was proposed to degrade AFB₁ in peanut oil using an amphipathic laccase-inorganic hybrid nanoflower (Lac NF-P) as a biocatalyst. Owing to the improved microenvironment of the enzymatic reaction and the enhanced stability of the enzyme structure, the proposed amphipathic Lac NF-P showed 134- and 3.2-fold increases in the degradation efficiency of AFB₁ in comparison to laccase and Lac NF, respectively. AFB₁ was removed to less than 0.96 μg/kg within 3 h when using Lac NF-P as a catalyst in the peanut oil, with the AFB₁ concentration ranging from 50 to 150 μg/kg. Moreover, the quality of the peanut oil had no obvious change, and no leakage of catalyst was observed after the treatment of Lac NF-P. In other words, our study may open an avenue for the development of a novel biocatalyst for the detoxification of mycotoxins in edible oils.

Designing multifunctional biocatalytic cascade system by multi-enzyme co-immobilization on biopolymers and nanostructured materials

In recent decades, enzyme-based biocatalytic systems have garnered increasing interest in industrial and applied research for catalysis and organic chemistry. Many enzymatic reactions have been applied to sustainable and environmentally friendly production processes, particularly in the pharmaceutical, fine chemicals, and flavor/fragrance industries. However, only a fraction of the enzymes available has been stepped up towards industrial-scale manufacturing due to low enzyme stability and challenging separation, recovery, and reusability. In this context, immobilization and co-immobilization in robust support materials have emerged as valuable strategies to overcome these inadequacies by facilitating repeated or continuous batch operations and downstream processes. To further reduce separations, it can be advantageous to use multiple enzymes at once in one pot. Enzyme co-immobilization enables biocatalytic synergism and reusability, boosting process efficiency and cost-effectiveness. Several studies on multi-enzyme immobilization and co-localization propose kinetic advantages of the enhanced turnover number for multiple enzymes. This review spotlights recent progress in developing versatile biocatalytic cascade systems by multi-enzyme co-immobilization on environmentally friendly biopolymers and nanostructured materials and their application scope in the chemical and biotechnological industries. After a succinct overview of carrier-based and carrier-free immobilization/co-immobilizations, co-immobilization of enzymes on a range of biopolymer and nanomaterials-based supports is thoroughly compiled with contemporary and state-of-the-art examples. This study provides a new horizon in developing effective and innovative multi-enzymatic systems with new possibilities to fully harness the adventure of biocatalytic systems.

Carrier Variety Used in Immobilization of His6-OPH Extends Its Application Areas

Organophosphorus hydrolase, containing a genetically introduced hexahistidine sequence (His6-OPH), attracts the attention of researchers by its promiscuous activity in hydrolytic reactions with various substrates, such as organophosphorus pesticides and chemical warfare agents, mycotoxins, and N-acyl homoserine lactones. The application of various carrier materials (metal-organic frameworks, polypeptides, bacterial cellulose, polyhydroxybutyrate, succinylated gelatin, etc.) for the immobilization and stabilization of His6-OPH by various methods, enables creation of biocatalysts with various properties and potential uses, in particular, as antidotes, recognition elements of biosensors, in fibers with chemical and biological protection, dressings with antimicrobial properties, highly porous sorbents for the degradation of toxicants, including in flow systems, etc. The use of computer modeling methods in the development of immobilized His6-OPH samples provides in silico prediction of emerging interactions between the enzyme and immobilizing polymer, which may have negative effects on the catalytic properties of the enzyme, and selection of the best options for experiments in vitro and in vivo. This review is aimed at analysis of known developments with immobilized His6-OPH, which allows to recognize existing recent trends in this field of research, as well as to identify the reasons limiting the use of a number of polymer molecules for the immobilization of this enzyme.

A versatile tag for simple preparation of cutinase towards enhanced biodegradation of polyethylene terephthalate

Enzymatic degradation of polyethylene terephthalate (PET) suffered from challenges such as complex and costly enzyme preparation, difficult access to PET substrates, poor reusability of free enzymes and sometimes MHET inhibitions. Herein, we propose an "all-in-one" strategy to address these issues with a well-designed elastin-like polypeptides (ELPs) tag. The preparation of the ELPs-tagged cutinase (ET-C) was efficient and easy to scale up by centrifugation, with an activity recovery of 57.55 % and a yield of 160 mg/L. Besides, the activity of the ET-C was 1.3 and 1.66-fold higher in degrading PET micro- and macro-plastics compared to wild-type cutinase. The self-immobilized cutinase (ET-C@SiO₂) obtained by the ELPs-mediated biosilicification exhibited high loading capacity, activity, and thermostability and maintained 77.65 % of the original activity after 10 reuses. Interestingly, the product of the ET-C was TPA, whereas the wild-type was TPA and MHET. This is a simple way to release the intermediates inhibition compared with the existing methods. Our results demonstrated the feasibility of the versatile ELPs tag, which will pave an alternative economic way for scalable PET biodegradation.

Synthesis of Novel Polymer-Assisted Organic-Inorganic Hybrid Nanoflowers and Their Application in Cascade Biocatalysis

This study reports on the synthesis of novel bienzyme polymer-assisted nanoflower complexes (PANF), their morphological and structural characterization, and their effectiveness as cascade biocatalysts. First, highly porous polyamide 6 microparticles (PA6 MP) are synthesized by activated anionic polymerization in solution. Second, the PA6 MP are used as carriers for hybrid bienzyme assemblies comprising glucose oxidase (GOx) and horseradish peroxidase (HRP). Thus, four PANF complexes with different co-localization and compartmentalization of the two enzymes are prepared. In samples NF GH/PA and NF GH@PA, both enzymes are localized within the same hybrid flowerlike organic-inorganic nanostructures (NF), the difference being in the way the PA6 MP are assembled with NF. In samples NF G/PAiH and NF G@PAiH, only GOx is located in the NF, while HRP is preliminary immobilized on PA6 MP. The morphology and the structure of the four PANF complexes have been studied by microscopy, spectroscopy, and synchrotron X-ray techniques. The catalytic activity of the four PANF was assessed by a two-step cascade reaction of glucose oxidation. The PANF complexes are up to 2-3 times more active than the free GOx/HRP dyad. They also display enhanced kinetic parameters, superior thermal stability in the 40-60 °C range, optimum performance at pH 4-6, and excellent storage stability. All PANF complexes are active for up to 6 consecutive operational cycles.

Hybridization of laccase with dendrimer-grafted silica-coated hercynite-copper phosphate magnetic hybrid nanoflowers and its application in bioremoval of gemifloxacin

Laccase was successfully hybridized with polyamidoamine (PAMAM) dendrimer-grafted silica-coated hercynite-copper phosphate magnetic hybrid nanoflowers (MHNFs) to increase the catalytic performance of the enzyme and apply in an effective bioremoval of gemifloxacin. For this purpose, the magnetic nanoparticles (MNPs) of hercynite were covered with a silica layer, and the core-shell SiO₂@hercynite was then modified with PAMAM dendrimer to increase the surface area of the carrier for the enzyme attachment. Subsequently, the whole complex was hybridized with laccase and copper phosphate to attain a large surface area (104.3 m² g^-1). The fabricated MHNFs acquired the entrapment yield and efficiency of 90 ± 3% and 66 ± 5%, respectively. The catalytic activity of the fabricated biocatalyst was remained up to 50% after 13 reusability cycles. Approximately 90% of gemifloxacin was removed by the constructed MHNFs after 3 h incubation by adsorption and degradation mechanisms. The biotransformation products were then identified, and degradation pathways were proposed as defluorination, decarboxylation, elimination of a cyclopropyl group, and cleavage of the pyrrolidine moiety. Furthermore, the toxicity of gemifloxacin was effectively diminished against some bacterial strains.

Development of multifarious carrier materials and impact conditions of immobilised microbial technology for environmental remediation: A review

Microbial technology is the most sustainable and eco-friendly method of environmental remediation. Immobilised microorganisms were introduced to further advance microbial technology. In immobilisation technology, carrier materials distribute a large number of microorganisms evenly on their surface or inside and protect them from external interference to better treat the targets, thus effectively improving their bioavailability. Although many carrier materials have been developed, there have been relatively few comprehensive reviews. Therefore, this paper summarises the types of carrier materials explored in the last ten years from the perspective of structure, microbial activity, and cost. Among these, carbon materials and biofilms, as environmentally friendly functional materials, have been widely applied for immobilisation because of their abundant sources and favorable growth conditions for microorganisms. The novel covalent organic framework (COF) could also be a new immobilisation material, due to its easy preparation and high performance. Different immobilisation methods were used to determine the relationship between carriers and microorganisms. Co-immobilisation is particularly important because it can compensate for the deficiencies of a single immobilisation method. This paper emphasises that impact conditions also affect the immobilisation effect and function. In addition to temperature and pH, the media conditions during the preparation and reaction of materials also play a role. Additionally, this study mainly reviews the applications and mechanisms of immobilised microorganisms in environmental remediation. Future development of immobilisation technology should focus on the discovery of novel and environmentally friendly carrier materials, as well as the establishment of optimal immobilisation conditions for microorganisms. This review intends to provide references for the development of immobilisation technology in environmental applications and to further the improve understanding of immobilisation technology.

The response surface methodology for optimization of Halomonas sp. C2SS100 lipase immobilization onto CaCO3 for treatment of tuna wash processing wastewater

An immobilized enzyme could exhibit selectively modified physicochemical properties, and it might offer a better environment for the enzyme activity. In this study, the immobilization yield of crude Halomonas sp. lipase was optimized to improve its stability. Thanks to its high adsorption capacity, CaCO₃ has been chosen as support for the immobilization process. Furthermore, response surface methodology (RSM) was used to determine optimal conditions for the immobilization of the bacterial lipase. Five tested factors (enzyme solution, support amount, time, temperature, and acetone volume) were optimized applying a central composite design of RSM. The maximum yield of lipase immobilization was improved to 96%. Furthermore, a biochemical characterization proved a significant improvement of the immobilized lipase stability. The immobilized enzyme is more stable at extreme pH values and high temperatures than the free one. We also tested the reusability of the immobilized lipase by evaluating the recovery of the support using simple filtration. Thanks to its high stability, the immobilized lipase was invested in an effective treatment of tuna wash processing wastewater. The oil biodegradation efficiency was established at 81.5% and was confirmed by Fourier transformation infrared spectrometry. Likewise, the biological oxygen demand values were reduced which makes a possible reduction of the wastewater pollution degree.

Biodegradation of environmental pollutants using catalase-based biocatalytic systems

The synergistic combination of biocatalysts and nanomaterials provides a new interface of a robust biocatalytic system that can effectively remediate environmental pollutants. Enzymes, such as catalase-based constructs, impart the desired candidature for catalytic transformation processes and are potential alternatives to replace conventional remediation strategies that have become laborious and somewhat inefficient. Furthermore, the controlled or uncontrolled discharge of various emerging pollutants (EPs) into water bodies is equally proportional to the fast-growing population and extensive urbanization. EPs affect the entire living being and continuously deteriorate the environmental system, directly or indirectly. The occurrence of EPs (even released after partial treatments, but still in bioactive forms) disturbs ecological integrity. Due to the ineffectiveness of in-practice traditional remediation processes, new and robust treatment measures as effective and sustainable remediation have become a meaningful goal. In this context, special attention has been shifted to engineering an enzyme (catalase)-based biodegradation system with immense prospects in environmental cleanup. The unique synergistic combination of nanomaterials (having multifunctional attributes) with enzymes of interest makes them a state-of-the-art interface that can further ameliorate bio-catalysis and biodegradation performance. This review covers current research and scientific advancement in developing and deploying catalase-based biocatalytic systems to mitigate several EPs from the environment matrices. The biocatalytic features of catalase, along with the mechanistic insight into H₂O₂ neutralization, several nano-based materials loaded with catalase, including nanoparticles (NPs), carbon nanotubes (CNTs), metal-organic frameworks (MOFs), polymeric-based composites, oxime-functionalized cryo-gel disks, electro-spun nanofibrous membranes, and other hybrid materials have also been discussed with suitable examples.

Recent advancements in enzyme-incorporated nanomaterials: Synthesis, mechanistic formation, and applications

Over the past decade, nanotechnology has been developed and employed across various entities. Among the numerous nanostructured material types, enzyme-incorporated nanomaterials have shown great potential in various fields, as an alternative to biologically derived as well as synthetically developed hybrid structures. The mechanism of incorporating enzyme onto a nanostructure depends on several factors including the method of immobilization, type of nanomaterial, as well as operational and environmental conditions. The prospects of enzyme-incorporated nanomaterials have shown promising results across various applications, such as biocatalysts, biosensors, drug therapy, and wastewater treatment. This is due to their excellent ability to exhibit chemical and physical properties such as high surface-to-volume ratio, recovery and/or reusability rates, sensitivity, response scale, and stable catalytic activity across wide operating conditions. In this review, the evolution of enzyme-incorporated nanomaterials along with their impact on our society due to its state-of-the-art properties, and its significance across different industrial applications are discussed. In addition, the weakness and future prospects of enzyme-incorporated nanomaterials were also discussed to guide scientists for futuristic research and development in this field.

Chitosan-regulated biomimetic hybrid nanoflower for efficiently immobilizing enzymes to enhance stability and by-product tolerance

Organic-inorganic hybrid nano-materials have been considered to be promising immobilization matrixes for enzymes due to their significantly enhanced reusability and stability of enzymes. Herein, we constructed a novel organic-inorganic hybrid nanoflower via biomacromolecule-regulated biomimetic mineralization to immobilize sucrose phosphorylase (SPase). It was found that chitosan (CS) effectively regulated the biomimetic mineralization of calcium phosphate (CaP), leading to the formation of flower-like hybrid materials for the entrapment of SPase via self-assembly to establish a nano-biocatalyst (CS-CaP@SPase). Upon immobilization, the obtained CS-CaP@SPase exhibited excellent pH, by-product and organic solvents tolerance, and storage stability. Specifically, at acidic condition (pH 4), CS-CaP@SPase performed over 80 % of initial activity, which was 2.42-folds higher than that of free SPase. The catalytic activity of free SPase was severely inhibited about 30 % in the presence of fructose (1.2 M), but CS-CaP@SPase only lost 5 % relative activity. The CS-CaP@SPase retained over 80 % of its relative activity, while the free SPase maintained <20 % of its relative activity in acetonitrile. The relative activity of CS-CaP@SPase was still retained about 80 % after 10 cycles and maintained 75 % after 15 days. Based on Raman spectra analysis, it was also found that the increased β-folding component of SPase in the secondary structure after immobilization was the main factor for its enhanced stability. It is reasonable to believe that biomacromolecule-regulated biomimetic mineralization could be potentially used as a promising method to immobilize enzymes with excellent stability and recyclability, thereby facilitating the preparation of highly efficient catalysts for industrial biocatalysts, biosensing, and biomedicine.