The utility of the template effect in metal-organic frameworks

In Situ Single-crystal X-ray Diffraction Studies of Physisorption and Chemisorption of SO2 within a Metal-Organic Framework and Its Competitive Adsorption with Water

Living on an increasingly polluted planet, the removal of toxic pollutants such as sulfur dioxide (SO2) from the troposphere and power station flue gas is becoming more and more important. The CPO-27/MOF-74 family of metal-organic frameworks (MOFs) with their high densities of open metal sites is well suited for the selective adsorption of gases that, like SO2, bind well to metals and have been extensively researched both practically and through computer simulations. However, until now, focus has centered upon the binding of SO2 to the open metal sites in this MOF (called chemisorption, where the adsorbent-adsorbate interaction is through a chemical bond). The possibility of physisorption (where the adsorbent-adsorbate interaction is only through weak intermolecular forces) has not been identified experimentally. This work presents an in situ single-crystal X-ray diffraction (scXRD) study that identifies discrete adsorption sites within Ni-MOF-74/Ni-CPO-27, where SO2 is both chemisorbed and physisorbed while also probing competitive adsorption of SO2 of these sites when water is present. Further features of this site have been confirmed by variable SO2 pressure scXRD studies, DFT calculations, and IR studies.

Solvent-Directed Construction of a Nanoporous Metal-Organic Framework with Potential in Selective Adsorption and Separation of Gas Mixtures Studied by Grand Canonical Monte Carlo Simulations

In this report, a microporous metal-organic framework of [Ca(TDC)(DMA)]n (1) and a two-dimensional coordination polymer of [Ca(TDC)(DMF)2 ]n (2), (TDC2- =Thiophene-2,5-dicarboxylate, DMA=N, N'-dimethylacetamide and DMF=N, N'-dimethylformamide) based on Ca(II) were designed by the effect of solvent, and X-ray analysis was performed for the single crystals of 1 and 2. Then, compound 1 was synthesized in three different methods and identified with a set of analyses. Compared to other adsorbents, MOFs are widely used in the field of adsorption and separation of various gases due to a series of distinctive features such as diverse and adjustable structures pores with different dimensions, high porosity and surface area with regular distribution of active sites. Therefore, the ability of 1 to uptake single gases (CH4 , CO2 , C2 H2 , H2, and N2 ) and separation of several binary mixtures of gases (CO2 /CH4 , CO2 /N2 , CO2 /H2 and CO2 /C2 H2 ), were investigated using Grand Canonical Monte Carlo simulations. Volumetric and gravimetric adsorption isotherms in various operating conditions, the isosteric heat of adsorption (qst ), the chemical potential for each thermodynamic state, and snapshots during the simulation process were reported in all cases. The results obtained from the adsorption simulation indicate that compound 1 has a high capacity for uptake of H2 (16 mmol g-1 ) and N2 (12.5 mmol g-1 ), CO2 (6.6 mmol g-1 ), C2 H2 (5 mmol g-1 ) and CH4 (1.5 mmol g-1 ) gases at 1 bar. It also performs well in separating CO2 in binary mixtures, which can be attributed to the presence of open metal sites in nodes of 1 and their electrostatic tendency to interact with CO2 containing the higher quadrupole dipole moment compared to other components of the mixture.

Heterostructured Ag@MOF-801/MIL-88A(Fe) Nanocomposite as a Biocompatible Photocatalyst for Degradation of Reactive Black 5 under Visible Light

Heterostructured Ag@MOF-801/MIL-88A(Fe) nanocomposite was synthesized through template effects in metal-organic frameworks (MOFs). MIL-88A(Fe) was fabricated on a MOF-801 template using the internal extended growth method (IEGM) via polyvinylpyrrolidone (PVP) as the structure-director agent to create the MIL-88A(Fe)-on-MOF-801 heterostructure. The MOF-801/MIL-88A(Fe) heterostructure was used as a template for the formation of Ag nanoparticles (NPs) inside it via a double solvents method (DSM) combined with a photoreduction route (PR). To characterize synthesized samples to a high level of detail, PXRD, FT-IR, EDX, N2 adsorption-desorption isotherms, TEM, DRS, PL, EIS, and Mott-Sckottky measurements were used. The resulting Ag@MOF-801/MIL-88A(Fe) nanocomposite demonstrated the highest photocatalytic activity of 91.72% for the degradation of Reactive Black 5, after 30 min under visible light irradiation.

Microporous Metal-Phosphonates with a Novel Orthogonalized Linker and Complementary Guests: Insights for Trivalent Metal Complexes from Divalent Metal Complexes

The reliable self-assembly of microporous metal-phosphonate materials remains a longstanding challenge. This stems from, generally, more coordination modes for the functional group allowing more dense structures, and stronger bonding driving less crystalline products. Here, a novel orthogonalized aryl-phosphonate linker, 1,3,5-tris(4'-phosphono-2',6'-dimethylphenyl) benzene (H₆ L3) has been used to direct formation of open frameworks. The peripheral aryl rings of H₆ L3 are orthogonalized relative to the central aromatic ring giving a tri-cleft conformation of the linker in which small aromatic molecules can readily associate. When coordinated to magnesium ions, a series of porous crystalline metal-organic, and hydrogen-bonded metal-organic frameworks (MOFs, HMOFs) are formed (CALF-41 (Mg), HCALF-42 (Mg), -43 (Mg)). While most metal-organic frameworks are tailored based on choice of metal and linker, here, the network structures are highly dependent on the inclusion and structure of the guest aromatic compounds. Larger guests, and a higher stoichiometry of metal, result in increased solvation of the metal ion, resulting in networks with connectivities increasingly involving hydrogen-bonds rather than direct phosphonate coordination. Upon thermal activation and aromatic template removal, the materials exhibit surface areas ranging from 400-600 m² /g. Self-assembly in the absence of aromatic guests yields mixtures of phases, frequently co-producing a dense 3-fold interpenetrated structure (1). Interestingly, a series of both more porous (530-900 m² /g), and more robust solids is formed by complexing with trivalent metal ions (Al, Ga, In) with aromatic guest; however, these are only attainable as microcrystalline powders. The polyprotic nature of phosphonate linkers enables structural analogy to the divalent analogues and these are identified as CALF-41 analogues. Finally, insights to the structural transformations during metal ion desolvation in this family are gained by considering a pair of structurally related Co materials, whose hydrogen-bonded (HCALF-44 (Co)) and desolvated (CALF-44 (Co)) coordination bonded networks were fully structurally characterized.

In situ single-crystal synchrotron X-ray diffraction studies of biologically active gases in metal-organic frameworks

Metal-organic frameworks (MOFs) are well known for their ability to adsorb various gases. The use of MOFs for the storage and release of biologically active gases, particularly nitric oxide (NO) and carbon monoxide (CO), has been a subject of interest. To elucidate the binding mechanisms and geometry of these gases, an in situ single crystal X-ray diffraction (scXRD) study using synchrotron radiation at Diamond Light Source has been performed on a set of MOFs that display promising gas adsorption properties. NO and CO, were introduced into activated Ni-CPO-27 and the related Co-4,6-dihydroxyisophthalate (Co-4,6-dhip). Both MOFs show strong binding affinity towards CO and NO, however CO suffers more from competitive co-adsorption of water. Additionally, we show that morphology can play an important role in the ease of dehydration for these two systems.

Polarity-Evolution Control and Luminescence Regulation in Multiple-Site Hydrogen-Bonded Organic Frameworks

Hydrogen-bonded organic frameworks (HOFs) have shown great potential in separation, sensing and host-guest chemistry, however, the pre-design of HOFs remains challenging due to the uncertainty of solvents' participation in framework formation. Herein, the polarity-evolution-controlled framework/luminescence regulation is demonstrated based on multiple-site hydrogen-bonded organic frameworks. Several distinct HOFs were prepared by changing bonding modes of building units via the evolution of electrostatic forces induced by various solvent polarities. High-polar solvents with strong electrostatic attraction to surrounding units showed the tendency to form cage structures, while low-polar solvents with weak electrostatic attraction only occupy hydrogen-bond sites, conducive to the channel formation. Furthermore, the conformation of optical building unit can be adjusted by affecting the solvent polarity, generating different luminescence outputs. These results pave the way for the rational design of ideal HOFs with on-demand framework regulation and luminescence properties.

Biocatalysts Synthesized with Lipase from Pseudomonas cepacia on Glycol-Modified ZIF-8: Characterization and Utilization in the Synthesis of Green Biodiesel

This research presents results on the production of biodiesel from the transesterification of acylglycerides present in palm oil, using the biocatalysts ZIF-8-PCL and Gly@ZIF-8-PCL synthesized by immobilization of Pseudomonas Cepacia Lipase as catalytic materials and using pure ZIF-8 and Gly@ZIF-8 (modified ZIF-8) as supports. The Gly@ZIF-8 carbonaceous material was prepared by wet impregnation of ZIF-8 with ethylene glycol as the carbon source, and then thermally modified. The calcination conditions were 900 °C for two hours with a heating rate of 7 °C/min in an inert atmosphere. A textural characterization was performed, and results showed superficial changes of materials at the microporous and mesoporous levels for the Gly@ZIF-8 material. Both the starting materials and biocatalysts were characterized by infrared spectroscopy (FTIR) and Raman spectroscopy. During the transesterification, using the two biocatalysts (ZIF-8-PCL and Gly@ZIF-8-PCL), two supernatant liquids were generated which were characterized by infrared spectroscopy (FTIR), gas chromatography coupled to mass spectrometry (GC-MS), and nuclear magnetic resonance (NMR). The results show that the two routes of synthesis of supports from ZIF-8 will be configured as effective methods for the generation of effective biocatalysts for biodiesel production.

Hierarchically Porous MOFs Synthesized by Soft-Template Strategies

The past few decades have been witnessing the rapid research boom of metal-organic frameworks (MOFs), which are assembled from metal nodes and multitopic organic linkers. In virtue of their modular assembly mode, they can be tailored according to desired functions to satisfy numerous potential applications. However, most initially reported MOFs were restricted to the microporous regime, limiting their practical applications with bulk molecules involved. Therefore, the research attention was immediately directed toward enlarging the intrinsic pore size of frameworks by extending the secondary building units or organic ligands. Unfortunately, the synthesis of more extended ligands is frequently tedious, and the most resultant MOFs are not sufficiently stable, restricting their popularization. The soft-template strategy is recognized as a promising avenue to produce hierarchically porous MOFs (HPMOFs), although early attempts generally failed due to the incompatibility between the surfactant self-assembly and guided crystallization process of MOF precursors in the organic phase. Therefore, developing a rational soft-template strategy to achieve the precise control of morphology and porosity of HPMOFs is of great significance.In this Account, we present our recent progress on the development and applications of HPMOFs prepared by soft-template strategies. We highlight the key issues upon using the soft-template strategy to synthesize HPMOFs. To enhance the interaction between the template and MOF precursor, a long-chain monocarboxylic acid strategy is introduced to synthesize HPMOFs with irregular mesopores in the organic phase. Then, to improve the order of mesopores, an aqueous-phase synthesis method using amphoteric surfactants as templates is developed to prepare ordered HPMOFs. To further enlarge the pore size and make the synthesis conditions of MOFs compatible with the self-assembly of surfactants, a salting-in species-induced self-assembly strategy is proposed and coupled with the structure-directing properties of copolymer templates to synthesize a series of HPMOFs with large mesopores and even macropores. This salting-in ion-mediated self-assembly (SIMS) strategy paves the way to modify the pore size, pore structure, morphology, and chemical composition of HPMOFs. The separated but intimately interconnected hierarchical pores in the resultant HPMOFs can not only realize rapid mass transport but also isolate different-size guest molecules so that they are competent for a broad range of applications including protein digestion, cascade catalysis, enzyme-assisted substrate sensing, and DNA cleavage. Finally, the limitations, challenges, and future developments of this rapidly evolving field are described. This Account with a highlight to the soft-template strategies not only provides interesting insights to understand the assembly process between templates and MOFs but also inspires an optimization of the properties of HPMOFs from diverse aspects for desired applications.

Metal-organic framework on porous TiO2 thin film-coated alumina beads for fractional distillation of plant essential oils

Fractionation of essential oils is technically challenging due to enormous scaffold diversities and structural complexities as well as difficulties in the implementation of the fractionation in the gas phase. Packing beads with multi-dimensional hierarchical nanostructures have been developed herein to pack fractional columns for atmospheric distillations. Activated alumina beads were coated with a porous TiO₂ thin film. Growth of Cu-BTC (benzene-1,3,5-tricarboxylate) crystals in resultant porous surfaces leads to the generation of new nanopores and increased metal centers for differential coordination with diverse components of essential oils. The TiO₂ thin film is not only an integral part of the composites but also induces the oriented growth of Cu-BTC metal organic framework (MOF) crystals through coordinative interactions. These Al₂O₃@TiO₂@Cu-BTC MOF beads show very strong absorptive capability for major components of essential oils, except for a single cyclic ether eucalyptol with steric hindrances. The eucalyptol was fractionated by using the column packed with those modified alumina beads from raw materials of Artemisia argyi, and Rosmarinus officinalis with high purities up to 96% and 93%, respectively.

Different Topologies of Hg(II)‐Bispidine 1D Coordination Polymers: Dynamic Behavior in Solvent Adsorption and Exchange Processes

One‐dimensional (1D) coordination polymers (CPs) featuring three different topologies, comprising zig‐zag, ribbon‐like and poly‐[n]‐catenane structures, were obtained by reaction of Hg(II) ions with a novel bispidine ligand L3, and structurally characterized by SC‐ and P‐XRD methods. The CPs obtained in the form of microcrystalline powders were tested for their ability to undergo solvent adsorption and exchange by P‐XRD and ¹H NMR spectroscopy. The extent of their dynamic behavior was then correlated to their structural features, highlighting the role of interchain interactions established among their constituting linear arrays. Zig‐zag CPs proved to be resilient to external chemical stimuli, while they differently respond to thermal treatments, depending on the solvent originally included within the CP. In the case of polycatenated structures, we observed transformations where the original topology was maintained upon guest exchange, but also cases where it changed to zig‐zag, even under solid/vapor conditions (i. e., no complete dissolution of the CP). Given the presence of linear interconnected 1D channels, 3  ⋅  ClBz‐polycatenane^Pwd is also able to trap volatile guests such as n‐hexane when exposed to its vapors.

Research progress of metal organic frameworks and their derivatives for adsorption of anions in water: A review

Anion pollution in water has become a problem that cannot be ignored. The anion concentration should be controlled below the national emission standard to meet the demand for clean water. Among the methods for removing excess anions in water, the adsorption method has a unique removal performance, and the core of the adsorption method is the adsorbent. In recent years, the emerging metal-organic frameworks (MOFs) have the advantages of adjustable porosity, high specific surface area, diverse functions, and easy modification. They are very competitive in the field of adsorption of liquid anions. This article focuses on the adsorption of fluoride, arsenate, chromate, radioactive anions (ReO₄^-, TcO₄^-, SeO₄^2-/SeO₃^2-), phosphate ion, chloride ion, and other anions by MOFs and their derivatives. The preparation methods of MOFs are introduced in turn, the application of different types of metal-based MOFs to adsorb various anions were discussed in categories with their crystal structure and functional groups. The influence on the adsorption of anions is analyzed, including the more common and special adsorption mechanisms, adsorption kinetics and thermodynamics, and regeneration performance are briefly described. Finally, the current situation of MOFs adsorption of anions is summarized, and the outlook for future development is summarized to provide my own opinions for the practical application of MOFs.

Modifying HKUST-1 Crystals for Selective Ethane Adsorption Using Ionic Liquids as Synthesis Media

Novel adsorbents for methane and ethane based on HKUST-1 metal-organic framework were synthesized by microwave (MW) assisted technique using ionic liquids (ILs) as synthesis media. It was found that the MW synthesis time remarkably impacts both the product yield and the physico-chemical characteristics of the produced HKUST-1 material. The crystalline phase purity, crystallite size/dispersion and textural properties of the synthesized HKUST-1 matrices determine their performance in methane and ethane adsorption. Therefore, the HKUST-1 material produced in MW fields for 3 min only shows the highest phase purity and the largest surface area (BET) and porosity, along with a rather small crystallite size (below ~300 nm), demonstrating high methane and ethane adsorption capacity in the pressure range 1–30 atm.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Metal–organic framework (MOF)-derived hollow hybrid Cu2O/Cu/Au for non-enzymatic H2O2 sensing

Hollow Cu2O/Cu/Au is synthesized using hollow Cu2O/Cu derived from hollow Cu-MOF-74 as a self-sacrificial template with a uniform dispersion of Au particles. It integrates high sensitivity and wide detection range for H2O2 non-enzymatic sensing.

Solvothermal Synthesis of a Novel Calcium Metal-Organic Framework: High Temperature and Electrochemical Behaviour

The rapid growth in the field of metal-organic frameworks (MOFs) over recent years has highlighted their high potential in a variety of applications. For biological and environmental applications MOFs with low toxicity are vitally important to avoid any harmful effects. For this reason, Ca-based MOFs are highly desirable owing to their low cost and high biocompatibility. Useful Ca MOFs are still rare owing to the ionic character and large size of the Ca²⁺ ion tending to produce dense phases. Presented here is a novel Ca-based MOF containing 2,3-dihyrdoxyterephthalate (2,3-dhtp) linkers Ca(2,3-dhtp)(H₂O) (SIMOF-4). The material undergoes a phase transformation on heating, which can be followed by variable temperature powder X-ray diffraction. The structure of the high temperature form was obtained using single-crystal X-ray diffraction. The electrochemical properties of SIMOF-4 were also investigated for use in a Na ion battery.

Selective Photodimerization in a Cyclodextrin Metal-Organic Framework

For the most part, enzymes contain one active site wherein they catalyze in a serial manner chemical reactions between substrates both efficiently and rapidly. Imagine if a situation could be created within a chiral porous crystal containing trillions of active sites where substrates can reside in vast numbers before being converted in parallel into products. Here, we report how it is possible to incorporate 1-anthracenecarboxylate (1-AC^-) as a substrate into a γ-cyclodextrin-containing metal-organic framework (CD-MOF-1), where the metals are K⁺ cations, prior to carrying out [4+4] photodimerizations between pairs of substrate molecules, affording selectively one of four possible regioisomers. One of the high-yielding regioisomers exhibits optical activity as a result of the presence of an 8:1 ratio of the two enantiomers following separation by high-performance liquid chromatography. The solid-state superstructure of 1-anthracenecarboxylate potassium salt (1-ACK), which is co-crystallized with γ-cyclodextrin, reveals that pairs of substrate molecules are not only packed inside tunnels between spherical cavities present in CD-MOF-1, but also stabilized-in addition to hydrogen-bonding to the C-2 and C-3 hydroxyl groups on the d-glucopyranosyl residues present in the γ-cyclodextrin tori-by combinations of hydrophobic and electrostatic interactions between the carboxyl groups in 1-AC^- and four K⁺ cations on the waistline between the two γ-cyclodextrin tori in the tunnels. These non-covalent bonding interactions result in preferred co-conformations that account for the highly regio- and enantioselective [4+4] cycloaddition during photoirradiation. Theoretical calculations, in conjunction with crystallography, support the regio- and stereochemical outcome of the photodimerization.

Indium metal-organic frameworks based on pyridylcarboxylate ligands and their potential applications

Indium metal-organic frameworks (In-MOFs) based on pyridylcarboxylate ligands represent a subclass of MOFs featuring diverse structures, a high stability, and various properties. This review discusses the different aspects of In-MOFs including their design, synthesis and structures as well as their typical potential applications in adsorption and separation, catalysis, and chemical sensors. Importantly, the effect of pyridine on the properties and stability of frameworks has been carefully studied. The introduction of a pyridine group not only significantly enriches clusters of In3+ ions, but also enables flexible, controllably synthesized ionic or neutral frameworks to be fabricated. Based on this, we suggest that this type of In-metal organic framework (MOF) should receive more attention in the field of MOF design.

Cage-Like Porous Materials with Simultaneous High C2 H2 Storage and Excellent C2 H2 /CO2 Separation Performance

Adsorption-based separation is an important technology for C₂ H₂ purification due to the environmentally friendly and energy-efficient advantage. In addition to the high selectivity of C₂ H₂ /CO₂ , the high uptake of C₂ H₂ also plays an important role in the separation progress. However, the trade-off between adsorption capacity and separation performance is still in a dilemma. Herein, we report a series of cage-like porous materials named FJI-H8-R (R=Me, Et, ⁿ Pr and ⁱ Pr) which all have high C₂ H₂ uptakes at 1 bar and 298 K. Dynamic breakthrough studies show that they all exhibit excellent C₂ H₂ /CO₂ separation performance. Particularly, FJI-H8-Me possesses a long breakthrough time up to 90 min g^-1 . Additionally, Grand Canonical Monte Carlo (GCMC) simulation reveals that the suitable pore space and geometry contribute much to the excellent separation performance.

Template-Mediated Control over Polymorphism in the Vapor-Assisted Formation of Zeolitic Imidazolate Framework Powders and Films

The landscape of possible polymorphs for some metal-organic frameworks (MOFs) can pose a challenge for controlling the outcome of their syntheses. Demonstrated here is the use of a template to control in the vapor-assisted formation of zeolitic imidazolate framework (ZIF) powders and thin films. Introducing a small amount of either ethanol or dimethylformamide vapor during the reaction between ZnO and 4,5-dichloroimidazole vapor results in the formation of the porous ZIF-71 phase, whereas other conditions lead to the formation of the dense ZIF-72 phase or amorphous materials. Time-resolved in situ small-angle X-ray scattering reveals that the porous phase is metastable and can be transformed into its dense polymorph. This transformation is avoided through the introduction of template vapor. The porosity of the resulting ZIF powders and films was studied by N₂ and Kr physisorption, as well as positron annihilation lifetime spectroscopy. The templating principle was demonstrated for other members of the ZIF family as well, including the ZIF-7 series, ZIF-8_Cl, and ZIF-8_Br.

Synthesis of a new ATN-type zeolitic imidazolate framework through cooperative effects of N,N-dipropylformamide and n-butylamine

ATN-[Zn(Im)₂] is the first known example of a ZIF exhibiting a zeolitic ATN topology, which was prepared using the cooperative effects of N,N-dipropylformamide and n-butylamine.

Optimizing the metal ion release and antibacterial activity of ZnO@ZIF-8 by modulating its synthesis method

An excellent feature of [ZnO]0.181@ZIF-8 is its slower release of Zn2+ ions as compared to Zn(CH3COO)2.2H2O.

Assembly, photocatalytic and fluorescence properties of three new coordination complexes of zinc(II) and nickel(II) with two kinds of flexible bis(pyridyl)-bis(amide) ligands

Three new coordination complexes [Zn(btec)0.5(L1)0.5(H2O)] n (1), [Ni(H2btec)(L1)(H2O)2] n (2), and {[Ni(btec)0.5(L2)(H2O)3]·2H2O} n (3) [H4btec = 1,2,4,5-benzenetetracarboxylic acid), L1 = N,N′-bis(3-pyridyl)adipamide, L2 = N,N′-bis(3-pyridyl)octanediamide] have been obtained under hydrothermal conditions. Single-crystal X-ray diffraction analysis has revealed that complex 1 has a layer structure based on [Zn(btec)0.5] n ribbons and the μ 2-bridging ligands L 1 . Complex 2 possesses a layered framework constructed by [Ni(H2btec)] n linear chains and [Ni(L1)] n wave-like chains. Complex 3 forms layers based on [Ni(L2)] n helical chains and μ 2-bridging L2 ligands, representing an interesting 4-fold interpenetrating 2D braided framework. The three different 2D frameworks exhibit 3,4-connected {4.62}2{42.62.82} topology for 1, 4-connected {44.62} topology for 2 and 3-connected {63} topology for 3. Their adjacent layers are further linked by hydrogen bonding interactions to generate 3D supramolecular structures. The differences in the nature of both the metal ions and the organic ligands lead to various coordination modes in the final structures. The photocatalytic activities and the fluorescence properties of complexes 1–3 were investigated.

From 1D to 2D Cd(II) and Zn(II) Coordination Networks by Replacing Monocarboxylate with Dicarboxylates in Partnership with Azine Ligands: Synthesis, Crystal Structures, Inclusion, and Emission Properties

Eight mixed-ligand coordination networks, [Cd(2-aba)(NO₃)(4-bphz)_3/2]_n·n(dmf) (1), [Cd(2-aba)₂(4-bphz)]_n·0.75n(dmf) (2), [Cd(seb)(4-bphz)]_n·n(H₂O) (3), [Cd(seb)(4-bpmhz)]_n·n(H₂O) (4), [Cd(hpa)(3-bphz)]_n (5), [Zn(1,3-bdc)(3-bpmhz)]_n·n(MeOH) (6), [Cd(1,3-bdc)(3-bpmhz)]_n ·0.5n(H₂O)·0.5n(EtOH) (7), and [Cd(NO₃)₂(3-bphz)(bpe)]_n·n(3-bphz) (8) were obtained by interplay of cadmium nitrate tetrahydrate or zinc nitrate hexahydrate with 2-aminobenzenecarboxylic acid (H(2-aba)), three dicarboxylic acids, sebacic (decanedioic acid, H₂seb), homophthalic (2-(carboxymethyl)benzoic acid, H₂hpa), isophthalic (1,3-benzenedicarboxylic acid, H₂(1,3-bdc)) acids, bis(4-pyridyl)ethane (bpe) and with four azine ligands, 1,2-bis(pyridin-4-ylmethylene)hydrazine (4-bphz), 1,2-bis(1-(pyridin-4-yl)ethylidene) hydrazine (4-bpmhz), 1,2-bis(pyridin-3-ylmethylene)hydrazine (3-bphz), and 1,2-bis(1-(pyridin-3-yl) ethylidene)hydrazine (3-bpmhz). Compounds 1 and 2 are 1D coordination polymers, while compounds 3–8 are 2D coordination polymers. All compounds were characterized by spectroscopic and X-ray diffraction methods of analysis. The solvent uptakes and stabilities to the guest evacuation were studied and compared for 1D and 2D coordination networks. The de-solvated forms revealed a significant increase of emission in comparison with the as-synthesized crystals.

Hierarchically porous metal-organic frameworks: synthesis strategies, structure(s), and emerging applications in decontamination

Metal-organic frameworks (MOFs) with high porosity have received much attention as promising materials for many applications owing to their unique properties. However, to date, most of the reported MOFs have microporous structures, which slow down diffusion/mass transfer and limit the accessibility of bulky molecules to its internal surface. Thus, it is crucial to develop an efficient way to create larger pores (mesoporous and/or macroporous) into microporous MOFs to form hierarchical porous metal-organic frameworks (HP-MOFs), which facilitate the diffusion and mass transfer of guest molecules. HP-MOFs are excellent and promising candidates for environmental applications under the background of environmental contaminations. In this review paper, we are primarily focusing on the latest progress in the preparation of HP-MOFs by employing template-assisted and template-free synthetic approaches for environmental cleaning applications. Particularly, the adsorptive purification of the most common toxic substances, including gases, dyes, heavy metal ions, and antibiotics from the environment using HP-MOFs as adsorbents is briefly discussed. The overall results clearly showed that the superiority of HP-MOFs compared with conventional microporous MOFs. Finally, we summarize the remaining challenges and provide personal perspectives on possible future development of HP-MOFs.

Solvent Templating and Structural Dynamics of Fluorinated 2D Cu-Carboxylate MOFs Derived from the Diffusion-Controlled Process

The layered 2D MOFs, owing to their enhanced flexibility and tunability, have recently emerged as a promising alternative to the 3D microporous MOFs in the quest for novel responsive functional materials. However, maintaining the simultaneous control over self-assembly of molecular building blocks as well as ordered stacking of MOF layers poses a significant synthetic challenge. We report on the controlled 2D MOF formation based on a case study of solvent-templated growth of a series of 2D Cu(II)–carboxylate MOFs varying in stacking modes and distances using a diffusion-controlled MOF deposition approach in various solvent mixtures. Moreover, we demonstrate the structural dynamics of the developed 2D MOFs involving both in-plane and out-of-plane movements of the individual 2D layers triggered by solvent exchange, which allowed for selective postsynthetic transformations between the developed 2D MOFs. We also investigated the gas adsorption properties of the developed MOFs, which demonstrates a remarkable crystal size effect on the N₂ adsorption capacity using a model 2D MOF system.

A room temperature diffusion-based approach has been used to prepare a new family of 2D MOFs based on Cu²⁺ paddlewheel clusters and bifunctional fluorinated carboxylate linkers. The stacking distance and geometry of the MOF layers was depending on the solvent mixture used. Remarkably, the developed 2D materials could be postsynthetically transformed into one another by solvent exchange, which was selectively controlled by the type of guest molecules involved.

Metalloporphyrinic metal-organic frameworks: Controlled synthesis for catalytic applications in environmental and biological media

Recently, as a new sub-family of porous coordination polymers (PCPs), porphyrinic-MOFs (Porph-MOFs) with biomimetic features have been developed using porphyrin macrocycles as ligands and/or pillared linkers. The control over the coordination of the porphyrin ligand and its derivatives however remains a challenge for engineering new tunable Porph-MOF frameworks by self-assembly methods. The key challenges exist in the following respects: (i) collapse of the large open pores of Porph-MOFs during synthesis, (ii) deactivation of unsaturated metal-sites (UMCs) by axial coordination, and (iii) the tendency of both coordinated moieties (at peripheral meso- and beta-carbon sites) and the N₄-pyridine core to coordinate with metal cations. In this respect, this review covers the advances in the design of Porph-MOFs relative to their counterpart covalent organic frameworks (Porph-COFs). The potential utility of custom-designed porphyrin/metalloporphyrins ligands is highlighted. Synthesis strategies of Porph-MOFs are also illustrated with modular design of hybrid guest@host composites (either Porph@MOFs or guest@Porph-MOFs) with exceptional topologies and stability. This review summarizes the synergistic benefits of coordinated porphyrin ligands and functional guest molecules in Porph-MOF composites for enhanced catalytic performance in various redox applications. This review shed lights on the engineering of new tunable hetero-metals open active sites within (metallo)porphyrin-MOFs as out-of-the-box platforms for enhanced catalytic processes in chemical and biological media.

Exploring the Scope of Macrocyclic "Shoe-last" Templates in the Mechanochemical Synthesis of RHO Topology Zeolitic Imidazolate Frameworks (ZIFs)

The macrocyclic cavitand MeMeCH2 is used as a template for the mechanochemical synthesis of 0.2MeMeCH2@RHO-Zn16(Cl2Im)32 (0.2MeMeCH2@ZIF-71) and RHO-ZnBIm2 (ZIF-11) zeolitic imidazolate frameworks (ZIFs). It is shown that MeMeCH2 significantly accelerates the mechanochemical synthesis, providing high porosity products (BET surface areas of 1140 m2/g and 869 m2/g, respectively). Templation of RHO-topology ZIF frameworks constructed of linkers larger than benzimidazole (HBIm) was unsuccessful. It is also shown that cavitands other than MeMeCH2-namely MeHCH2, MeiBuCH2, HPhCH2, MePhCH2, BrPhCH2, BrC5CH2-can serve as effective templates for the synthesis of x(cavitand)@RHO-ZnIm2 products. The limitations on cavitand size and shape are explored in terms of their effectiveness as templates.

Structural elucidation of microcrystalline MOFs from powder X-ray diffraction

Ab initio powder XRD structure solution and MOFs.

Tuneable solvent adsorption and exchange by 1D bispidine-based Mn(ii) coordination polymers via ligand design

General trends on the structural and dynamic properties of bispidine-based Mn(ii) 1D coordination polymers have been outlined on the basis of both single-crystals and microcrystalline powders data and by solvent adsorption and exchange experiments.

A Zn(ii) metal-organic framework based on bimetallic paddle wheels as a luminescence indicator for carcinogenic organic pollutants: phthalate esters

Based on the multifunctional ligand 3-(1H-1,2,4-triazol-1-yl)isophthalic acid (H2TIA), a three-dimensional coordination polymer, namely {[Zn(TIA)]·DMA} n (Zn-1) was synthesized solvothermally. Single-crystal X-ray diffraction analyses confirmed that Zn-1 is a 3D framework composed of binuclear Zn2 paddle wheels with one-dimensional channels long the a direction. Further topological analyses revealed that MOF Zn-1 existed as a (3,6)-connected rtl binodal net {4·62}2{42·610·83}. Furthermore, the luminescence explorations indicate that complex Zn-1 is the first MOF for luminescent probing of phthalate esters (carcinogenic organic pollutants) with a high quenching-efficiency constant and low fluorescence-detection limit.