Rational design and synthesis of ultramicroporous metal-organic frameworks for gas separation

Functional flexible adsorbents and their potential utility

Physisorbents are poised to address global challenges such as CO2 capture, mitigation of water scarcity and energy-efficient commodity gas storage and separation. Rigid physisorbents, i.e. those adsorbents that retain their structures upon gas or vapour exposure, are well studied in this context. Conversely, cooperatively flexible physisorbents undergo long-range structural transformations stimulated by guest exposure. Discovered serendipitously, flexible adsorbents have generally been regarded as scientific curiosities, which has contributed to misconceptions about their potential utility. Recently, increased scientific interest and insight into the properties of flexible adsorbents has afforded materials whose performance suggests that flexible adsorbents can compete with rigid adsorbents for both storage and separation applications. With respect to gas storage, adsorbents that undergo guest-induced phase transformations between low and high porosity phases in the right pressure range can offer improved working capacity and heat management, as exemplified by studies on adsorbed natural gas storage. For gas and vapour separations, the very nature of flexible adsorbents means that they can undergo induced fit mechanisms of guest binding, i.e. the adsorbent can adapt to a specific adsorbate. Such flexible adsorbents have set several new benchmarks for certain hydrocarbon separations in terms of selectivity and separation performance. This Feature Article reviews progress made by us and others towards the crystal engineering (design and control) of flexible adsorbents and addresses several of the myths that have emerged since their initial discovery, particularly with respect to those performance parameters of relevance to natural gas storage, water harvesting and hydrocarbon gas/vapour separation.

Homochiral BINOL-Based Metal-Organic Frameworks for Luminescence Sensing of Hydrobenzoin Enantiomers

Luminescent chiral metal-organic frameworks (CMOFs) are promising candidates for the enantioselective sensing of important chiral molecules. Herein, we report the synthesis and characterization of Zn and Cd CMOFs based on 1,1'-bi-2-naphthol (BINOL)-derived 3,3',6,6'-tetra(benzoic acids), H4L-OEt and H4L-OH. Four CMOFs, Zn-L-OEt, Zn-L-OH, Cd-L-OEt, and Cd-L-OH, based on these ligands were crystallographically characterized. Zinc cations form 8-connected (8-c) penta-metallic secondary building units (SBUs), while cadmium cations form 4-c trimetallic SBUs. These SBUs are linked by 4-c L-OEt and L-OH ligands to form noninterpenetrated 4, 8-c 4,8T41 zinc CMOFs (Zn-L-OEt and Zn-L-OH) and 2-fold interpenetrated 4-c diamondoid (dia) cadmium CMOFs (Cd-L-OEt and Cd-L-OH), respectively. At a ligand concentration of 24 μM, H4L-OEt and H4L-OH showed negligible luminescent quenching by RR- and SS-hydrobenzoin (HB) enantiomers with Stern-Völmer constants of 29-89 M-1. In contrast, CMOFs displayed efficient quenching by HB enantiomers with Stern-Völmer constants of 583-1200 M-1, due to significant HB preconcentration in CMOF channels via favorable host-guest interactions between CMOF frameworks and HB molecules. The CMOFs demonstrated luminescence quenching selectivity for RR-HB over SS-HB, with Zn-L-OEt exhibiting the highest quenching ratio (Ksv(RR)/Ksv(SS)) of 1.624. This work highlights the potential of CMOFs in enantioselective sensing applications.

Synthesis of UiO-66-NH2@PSF Hollow Fiber Membrane with Enhanced Simultaneous Adsorption of Pb2+ and Phosphate for Hydrogen Peroxide Purification

Electronic grade hydrogen peroxide plays a crucial role in the fabrication of large-scale integrated circuits. However, hydrogen peroxide prepared by the anthraquinone method contains impurities such as lead ions (Pb2+) and phosphate, which can seriously affect the yield of the circuit. Traditional adsorbent materials have difficulty in solving the problem of simultaneous adsorption of trace anions and cations in hydrogen peroxide due to the single adsorption site and poor adsorption kinetics. In this study, UiO-66-NH2 was prepared by introducing a -NH2 group on the terephthalic acid ligand, and a series of hybrid matrix hollow fiber membranes with different UiO-66-NH2 contents were prepared by loading it on polysulfone (PSF). This initiative not only improved the pore size and water flux of hollow fiber membranes but also enhanced the removal efficiency of ions from hydrogen peroxide solution, thereby facilitating practical application. Among them, UiO-66-NH2@PSF-1.5 showed the best adsorption of phosphate and lead ions with adsorption capacities of 3.099 and 2.160 mg g-1 and reached the removal efficiency of 67.1 and 60.1%, which fully confirms the practicability in the purification of electronic chemicals. This work innovatively proposes that UiO-66-NH2@PSF hybrid matrix hollow fiber membranes have great potential as simultaneous adsorbents for cations and anions in the efficient purification of electronic grade solvents.

Trace Adsorptive Removal of PFAS from Water by Optimizing the UiO-66 MOF Interface

The confluence of pervasiveness, bioaccumulation, and toxicity in freshwater contaminants presents an environmental threat second to none. Exemplifying this trifecta, per- and polyfluoroalkyl substances (PFAS) present an alarming hazard among the emerging contaminants. State-of-the-art PFAS adsorbents used in drinking water treatment, namely, activated carbons and ion-exchange resins, are handicapped by low adsorption capacity, competitive adsorption, and/or slow kinetics. To overcome these shortcomings, metal-organic frameworks (MOFs) with tailored pore size, surface, and pore chemistry are promising alternatives. Thanks to the compositional modularity of MOFs and polymer-MOF composites, herein we report on a series of water-stable zirconium carboxylate MOFs and their low-cost polymer-grafted composites as C8-PFAS adsorbents with benchmark kinetics and "parts per billion" removal efficiencies. Bespoke insights into the structure-function relationships of PFAS adsorbents are obtained by leveraging interfacial design principles on solid sorbents, creating a synergy between the extrinsic particle surfaces and intrinsic molecular building blocks.

Isoreticular Contraction in Dicopper Paddle-Wheel-Based Metal-Organic Frameworks to Enhance C2H2/CO2 Separation

Achieving a balance between high selectivity and uptake is a formidable challenge for the purification of acetylene from mixtures with carbon dioxide, particularly when seeking to maximize both C2H2 adsorption capacity and C2H2/CO2 separation selectivity in crystalline porous materials. In this study, leveraging the principles of reticular chemistry, we selected two tetracarboxylate-based linkers and combined them with Cu2+ ions to synthesize two isoreticular dicopper paddle-wheel-based metal-organic frameworks (MOFs): Cu-TPTC (terphenyl-3,3',5,5'-tetracarboxylic acid, H4TPTC) and Cu-ABTC (3,3,5,5-azobenzenetetracarboxylic acid, H4ABTC). The structural and sorption analyses revealed that Cu-ABTC, despite having slightly smaller pores due to the strategic replacement of a phenyl ring with an azo group between two tetratopic ligands, maintains high porosity compared to Cu-TPTC. Furthermore, Cu-ABTC outperforms Cu-TPTC in terms of C2H2 adsorption capacity (196 cm3 g-1 at 298 K and 1 bar) and C2H2/CO2 separation selectivity (16.5~5.6). These findings were corroborated by dynamic breakthrough experiments and computational modeling. This research highlights the potential of the isoreticular contraction strategy in enhancing MOFs for sophisticated gas adsorption and separation processes.

Fabricating a Robust Ultramicroporous Metal-Organic Framework for Purifying Natural Gas and Coal Mine Methane

Purifying methane (CH4) from natural gas and coal mine methane (CMM) is of great significance but challenging in the chemical industry. Herein, a robust ultramicroporous metal-organic framework (MOF) is reported, which can be synthesized on a gram scale by stirring under room temperature. Single-component adsorption isotherms of gases (CH4, ethane (C2H6), propane (C3H8), nitrogen (N2)) and breakthrough experiments indicate that the MOF can separate CH4 efficiently from CH4/C2H6/C3H8 ternary mixture, with super high purity-CH4 production of 154.7 cm3 g-1. Additionally, the MOF shows higher CH4 capacity than N2, resulting in excellent separation performance for the CH4/N2 mixture. Notably, the binding sites of gases can be precisely determined by single-crystal X-ray data, further confirmed by molecular simulation. It is found that there are multiple hydrogen bonds and C─H···π interactions between the gases and the framework. This work offers an excellent candidate material for CH4 purification with both high capacity and separation efficiency.

Exploring Synthesis Strategies and Interactions between MOFs and Drugs for Controlled Drug Loading and Release, Characterizing Interactions through Advanced Techniques

This study explores various aspects of Metal-Organic Frameworks (MOFs), focusing on synthesis techniques to adjust pore size and key ligands and metals for crafting carrier MOFs. It investigates MOF-drug interactions, including hydrogen bonding, van der Waals, and electrostatic interactions, along with kinetic studies. The multifaceted applications of MOFs in drug delivery systems are elucidated. The morphology and structure of MOFs are intricately linked to synthesis methodology, impacting attributes like crystallinity, porosity, and surface area. Hydrothermal synthesis yields MOFs with high crystallinity, suitable for catalytic applications, while solvothermal synthesis generates MOFs with increased porosity, ideal for gas and liquid adsorption. Understanding MOF-drug interactions is crucial for optimizing drug delivery, affecting charge capacity, stability, and therapeutic efficacy. Kinetic studies determine drug release rates and uniformity, vital for controlled drug delivery. Overall, comprehending drug-MOF interactions and kinetics is essential for developing effective and controllable drug delivery systems.

The Reinforced Separation of Intractable Gas Mixtures by Using Porous Adsorbents

This review focuses on the mechanism and driving force in the intractable gas separation using porous adsorbents. A variety of intractable mixtures have been discussed, including air separation, carbon capture, and hydrocarbon purification. Moreover, the separation systems are categorized according to distinctly biased modes depending on the minor differences in the kinetic diameter, dipole/quadruple moment, and polarizability of the adsorbates, or sorted by the varied separation occasions (e.g., CO2 capture from flue gas or air) and driving forces (thermodynamic and kinetic separation, molecular sieving). Each section highlights the functionalization strategies for porous materials, like synthesis condition optimization and organic group modifications for porous carbon materials, cation exchange and heteroatom doping for zeolites, and metal node-organic ligand adjustments for MOFs. These functionalization strategies are subsequently associated with enhanced adsorption performances (capacity, selectivity, structural/thermal stability, moisture resistance, etc.) toward the analog gas mixtures. Finally, this review also discusses future challenges and prospects for using porous materials in intractable gas separation. Therein, the combination of theoretical calculation with the synthesis condition and adsorption parameters optimization of porous adsorbents may have great potential, given its fast targeting of candidate adsorbents and deeper insights into the adsorption forces in the confined pores and cages.

A Zn-Cluster-Based MOF for Efficient Separation of C3H8/C2H6/CH4

The separation and purification of methane from natural gas are crucial chemical processes. Herein, we report a Zn-cluster-based MOF (SDMOF-3), enabling the efficient separation of mixed low-carbon alkanes. The unique Zn clusters in the MOF enhance its interaction with hydrogen atoms in alkanes, thus realizing the separation of saturated light alkanes. Single-component gas adsorption tests revealed that SDMOF-3 exhibits significantly higher affinity for C3H8 compared to CH4 and C2H6 at 298 K. Dynamic column penetration experiments with mixed gases demonstrated the excellent separation performance of SDMOF-3 for separating C3H8 and C2H6 from CH4.

Facile and scale-up syntheses of high-performance enzyme@meso-HOF biocatalysts

Facile immobilization is essential for the wide application of enzymes in large-scale catalytic processes. However, exploration of suitable enzyme supports poses an unmet challenge, particularly in the context of scale-up biocatalyst fabrication. In this study, we present facile and scale-up syntheses of high-performance enzyme biocatalysts via in situ encapsulation of cytochrome c (Cyt-c) as mono-enzyme and glucose oxidase (GOx)-horseradish peroxidase (HRP) as dual-enzyme cascade (GOx&HRP) systems, respectively, into a stable mesoporous hydrogen-bonded organic framework (meso-HOF) matrix. In situ encapsulation reactions occur under ambient conditions, and facilitate scale up (∼3 g per reaction) of enzyme@meso-HOF within a very short period (5-10 min). The resultant biocatalysts not only exhibit high enzyme loading (37.9 wt% for mono-enzyme and 22.8 wt% for dual-enzyme) with minimal leaching, but also demonstrate high catalytic activity, superior reusability, and durability. This study represents an example of scale-up fabrication of enzyme@meso-HOF biocatalysts on the gram level and highlights superior meso-HOFs as suitable host matrices for biomolecular entities.

Cross-Linking CdSO4-Type Nets with Hexafluorosilicate Anions to Form an Ultramicroporous Material for Efficient C2H2/CO2 and C2H2/C2H4 Separation

A 44.610.8 topology hybrid ultramicroporous material (HUM), {[Cu1.5F(SiF6)(L)2.5]·G}n, (L = 4,4'-bisimidazolylbiphenyl, G = guest molecules), 1, formed by cross-linking interpenetrated 3D four-connected CdSO4-type nets with hexafluorosilicate anions is synthesized and evaluated in the context of gas sorption and separation herein. 1 is the first HUM functionalized with two different types of fluorinated sites (SiF6 2- and F- anions) lining along the pore surface. The optimal pore size (≈5 Å) combining mixed and high-density electronegative fluorinated sites enable 1 to preferentially adsorb C2H2 over CO2 and C2H4 by hydrogen bonding interactions with a high C2H2 isosteric heat of adsorption (Qst) of ≈42.3 kJ mol-1 at zero loading. The pronounced discriminatory sorption behaviors lead to excellent separation performance for C2H2/CO2 and C2H2/C2H4 that surpasses many well-known sorbents. Dynamic breakthrough experiments are conducted to confirm the practical separation capability of 1, which reveal an impressive separation factor of 6.1 for equimolar C2H2/CO2 mixture. Furthermore, molecular simulation and density functional theory (DFT) calculations validate the strong binding of C2H2 stems from the chelating fix of C2H2 between SiF6 2- anion and coordinated F- anion.

Chromium(II)-isophthalate 2D MOF with Redox-Tailorable Gas Adsorption Selectivity

Redox-active metal-organic frameworks (MOFs) are very promising materials due to their potential capabilities for postsynthetic modification aimed at tailoring their application properties. However, the research field related to redox-active MOFs is still relatively underdeveloped, which limits their practical application. We investigated the self-assembly process of Cr(II) ions and isophthalate (m-bdc) linkers, which have been previously demonstrated to yield 0D metal-organic polyhedra. However, using the diffusion-controlled synthetic approach, we demonstrate the selective preparation of a 2D-layered Cr(II)-based MOF material [Cr(m-bdc)]·H2O (1·H2O). Remarkably, the controlled oxidation of the developed 2D MOF using nitric oxide or dry oxygen resulted in modified porous materials with excellent H2/N2 adsorption selectivities.

Highly sensitive and highly selective lead ion electrochemical sensor based on zn/cu-btc-nh2 bimetallic MOFs with nano-reticulated reinforcing microstructure

Identifying ultra-trace amounts of divalent lead ions (Pb2+) with high response and selectivity, continues to be a pressing issue in identifying environmental pollutants and preventing health complications. This paper details how the in-situ electrodeposited Zn/Cu-BTC-NH2 metal-organic frameworks (MOFs) boosts Pb2+ concentration for amino adsorption and facilitates ion transfer between Cu element and Pb2+. The modified coating of the glassy carbon electrode (GCE) exhibits a unique nano-reticulated structure loaded with octahedron particles, the nano-reticulated structure ensures the structural strength of the modified electrode layer, while the loaded octahedral particles enhancing electrocatalytic activity. The ultra-trace detection of Pb2+ at concentrations below μg·L-1 is accomplished by using the square wave anodic stripping voltammetry (SWASV) method, the fabricated Zn/Cu-BTC-NH2 modified electrode signifies a detection threshold of 0.021 μg L-1 and a clearly ascending linear interval prior to the rise in Pb2+ concentration to 120 μg L-1. The reported electrochemical method for the precise identification of Pb2+ in water-based solutions offers a practical approach for modifying MOFs materials and detecting heavy metal ions.

Spatially Confined π-Complexation within Pore-Space-Partitioned Metal-Organic Frameworks for Enhanced Light Hydrocarbon Separation and Purification

Ultramicroporous metal-organic frameworks (MOFs) are demonstrated to be advantageous for the separation and purification of light hydrocarbons such as C2H2, C2H4, and CH4. The introduction of transition metal sites with strong π-complexation affinity into MOFs is more effective than other adsorption sites for the selective adsorption of π-electron-rich unsaturated hydrocarbon gases from their mixtures. However, lower coordination numbers make it challenging to produce robust MOFs directly utilizing metal ions with π-coordination activity, such as Cu+, Ag+, and Pd2+. Herein, a series of novel π-complexing MOFs (SNNU-33s) with a pore size of 4.6 Å are precisely constructed by cleverly introducing symmetrically matched C3-type [Cu(pyz)3] (pyz = pyrazine) coordinated fragments into 1D hexagonal channels of MIL-88 prototype frameworks. Benifit from the spatial confinement combined with π-complex-active Cu+ of [Cu(pyz)3], pore-space-partitioned SNNU-33 MOFs all present excellent C2H2/CH4, C2H4/CH4, and CO2/CH4 separation ability. Notably, the optimized SNNU-33b adsorbent demonstrates top-level IAST selectivity values for C2H2/CH4 (597.4) and C2H4/CH4 (69.8), as well as excellent breakthrough performance. Theoretical calculations further reveal that such benchmark light hydrocarbon separation and purification ability is mainly ascribed to the extra-strong binding affinity between Cu+ and π-electron donor molecules via a spatially confined π-complexation process.

Recent Advances of Multidentate Ligand-Based Anion-Pillared MOFs for Enhanced Separation and Purification Processes

As an important subclass of metal-organic frameworks (MOFs), anion-pillars MOFs (APMOFs) have recently exhibited exceptional performances in separation and purification processes. The adjustment of pore sizes and environments of APMOFs can be finely tuned through judicious combination of organic ligands, anion pillars, and metal ions. Compared to widely investigated anion pillars, organic ligands are more crucial as they allow for a broader range of pore sizes and environments at the nanometer scale. Furthermore, different from the bidentate ligand-based APMOFs that typically form three-dimensional (3D) frameworks with pcu topology, APMOFs constructed using multidentate nitrogen(N)-containing ligands (with a coordination number ≥ 3) offer opportunities to create APMOFs with diverse topologies. The larger dimensions and possible distortion of multidentate N-containing ligands prove advantageous for addressing multi-component hydrocarbon separations encompassing a broad spectrum of dynamic diameters. Therefore, this Review summarizes the structural characteristics of multidentate ligand-based APMOFs and their enhanced performances for gas separation and purification processes. Additionally, it discusses current challenges and prospects associated with constructing multidentate ligand-based APMOFs while providing prospects. This critical review will provide valuable insights and guides for designing and developing advanced multidentate ligand-based APMOF adsorbents.

Deciphering Mechanisms of CO2-Selective Recognition over Acetylene within Porous Materials

Reverse adsorption of carbon dioxide (CO2) from acetylene (C2H2) presents both significant importance and formidable challenges, particularly in the context of carbon capture, energy efficiency, and environmental sustainability. In this Review, we delve into the burgeoning field of reverse CO2/C2H2 adsorption and separation, underscoring the absence of a cohesive materials design strategy and a comprehensive understanding of the CO2-selective capture mechanisms from C2H2, in contrast to the quite mature methodologies available for C2H2-selective adsorption. Focusing on porous materials, the latest advancements in CO2-selective recognition mechanisms are highlighted. The review establishes that the efficacy of CO2 recognition from C2H2 relies intricately on a myriad of factors, including pore architecture, framework flexibility, functional group interactions, and dynamic responsive behaviors under operating conditions. It is noted that achieving selectivity extends beyond physical sieving, necessitating meticulous adjustments in pore chemistry to exploit the subtle differences between CO2 and C2H2. This comprehensive overview seeks to enhance the understanding of CO2-selective recognition mechanisms, integrating essential insights crucial for the advancement of future materials. It also lays the groundwork for innovative porous materials in CO2/C2H2 separation, addressing the pressing demand for more efficient molecular recognition within gas separation technologies.

Exploring affinity between organic probes and Prussian Blue Analogues via inverse gas chromatography

Prussian Blue Analogues (PBAs), which are characterized by their open structure, high stability, and non-toxic properties, have recently been the subject of research for various applications, including their use as electrode precursors for capacitive deionization, gas storage, and environmental purification. These materials can be readily tailored to enhance their affinity towards gases for integration with sensing devices. An improved understanding of PBA-gas interactions is expected to enhance material development and existing sensor deposition schemes greatly. The use of inverse gas chromatography (IGC) is a robust approach for examining the relationship between porous materials and gases. In this study, the adsorption properties of (functionalized) hydrocarbons, i.e., probe molecules, on the copper hexacyanoferrate (CuHCF) lattice were studied via IGC, demonstrating that alkylbenzenes have a higher affinity for this material than n-alkanes. This difference was rationalized by steric hindrance, π-π interactions, and vapour pressure effects. Along the same line, the five isomers of hexane showed decreasing selectivity upon increased steric hindrance. Enthalpy values for n-pentane, n-hexane and n-heptane were lower than that of toluene. The introduction of increased probe masses resulted in a surface coverage of 46% for toluene. For all n-alkane probe molecules this percentage was lower. However, the isotherms of these probes did not show saturation points and the observed linear regime proves beneficial for gas sensing. Our work demonstrates the versatility of CuHCF for gas sensing purposes and the potential of IGC to characterize the adsorption characteristics of such a porous nanomaterial.

Stimulus-Induced Dynamic Behavior Regulation of Flexible Crystals through the Tuning of Module Rigidity

Introducing dynamic behavior into periodic frameworks has borne fruit in the form of flexible porous crystals. The detailed molecular design of frameworks in order to control their collective dynamics is of particular interest, for example, to achieve stimulus-induced behavior. Herein, by varying the degree of rigidity of ditopic pillar linkers, two isostructural flexible metal-organic frameworks (MOFs) with common rigid supermolecular building bilayers were constructed. The subtle substitution of single (in bibenzyl-4,4'-dicarboxylic acid; H2BBDC) with double (in 4,4'-stilbenedicarboxylic acid; H2SDC) C-C bonds in pillared linkers led to markedly different flexible behavior of these two MOFs. Upon the removal of guest molecules, both frameworks clearly show reversible single-crystal-to-single-crystal transformations involving the cis-trans conformation change and a resulting swing of the corresponding pillar linkers, which gives rise to Flex-Cd-MOF-1a and Flex-Cd-MOF-2a, respectively. Strikingly, a more favorable gas-induced dynamic behavior in Flex-Cd-MOF-2a was verified in detail by stepwise C3H6/C3H8 sorption isotherms and the corresponding in situ powder X-ray diffraction experiments. These insights are strongly supported by molecular modeling studies on the sorption mechanism that explores the sorption landscape. Furthermore, a consistency between the macroscopic elasticity and microscopic flexibility of Flex-Cd-MOF-2 was observed. This work fuels a growing interest in developing MOFs with desired chemomechanical functions and presents detailed insights into the origins of flexible MOFs.

Isoreticular Contraction of Cage-like Metal-Organic Frameworks with Optimized Pore Space for Enhanced C2H2/CO2 and C2H2/C2H4 Separations

The C2H2 separation from CO2 and C2H4 is of great importance yet highly challenging in the petrochemical industry, owing to their similar physical and chemical properties. Herein, the pore nanospace engineering of cage-like mixed-ligand MFOF-1 has been accomplished via contracting the size of the pyridine- and carboxylic acid-functionalized linkers and introducing a fluoride- and sulfate-bridging cobalt cluster, based on a reticular chemistry strategy. Compared with the prototypical MFOF-1, the constructed FJUT-1 with the same topology presents significantly improved C2H2 adsorption capacity, and selective C2H2 separation performance due to the reduced cage cavity size, functionalized pore surface, and appropriate pore volume. The introduction of fluoride- and sulfate-bridging cubane-type tetranuclear cobalt clusters bestows FJUT-1 with exceptional chemical stability under harsh conditions while providing multiple potential C2H2 binding sites, thus rendering the adequate ability for practical C2H2 separation application as confirmed by the dynamic breakthrough experiments under dry and humid conditions. Additionally, the distinct binding mechanism is suggested by theoretical calculations in which the multiple supramolecular interactions involving C-H···O, C-H···F, and other van der Waals forces play a critical role in the selective C2H2 separation.

Hierarchically Structured Metal-Organic Framework Polymer Composites for Chemical Warfare Agent Degradation

Metal-organic frameworks (MOFs) have captured the imagination of researchers for their highly tunable properties and many potential applications, including as catalysts for a variety of transformations. Even though MOFs possess significant potential, the challenges associated with processing of these crystalline powders into usable form factors while retaining their functional properties limit their end use applications. Herein, we introduce a new approach to construct MOF-polymer composites via 3D photoprinting to overcome these limitations. We designed photoresin composite formulations that use polymerization-induced phase separation to cause the MOF catalysts to migrate to the surface of the printed material, where they are accessible to substrates such as chemical warfare agents. Using our approach, MOF-polymer composites can be fabricated into nearly any shape or architecture while retaining both the excellent catalytic activity at 10 wt % loading of the MOF components and the flexible, elastomeric mechanical properties of a polymer.

Maximizing Electrostatic Interaction in Ultramicroporous Metal-Organic Frameworks for the One-Step Purification of Acetylene from Ternary Mixture

Developing efficient adsorbents for acetylene purification from multicomponent mixtures is of critical significance in the chemical industry, but the trade-off between regenerability and selectivity significantly restricts practical industrial applications. Here, we report ultramicroporous metal-organic frameworks with acetylene-affinity channels to enhance electrostatic interaction between C2H2 and frameworks for the efficient one-step purification of C2H2 from C2H2/CO2/C2H4 mixtures, in which the electrostatic interaction led to high regenerability. The obtained SNNU-277 exhibits significantly higher adsorption capacity for C2H2 than that for both C2H4 and CO2 at 298 K and 0.1 bar, while an ultrahigh selectivity of C2H2/C2H4 (100.6 at 298 K) and C2H2/CO2 (32.8 at 298 K) were achieved at 1 bar. Breakthrough experiments validated that SNNU-277 can efficiently separate C2H2 from C2H2/C2H4/CO2 mixtures. CO2 and C2H4 broke through the adsorption column at 4 and 14.8 min g-1, whereas C2H2 was detected until 177.6 min g-1 at 298 K. Theoretical calculations suggest that the framework is electrostatically compatible with C2H2 and electrostatically repels C2H4 and CO2 in the mixed components. This work highlights the importance of rational pore engineering for maximizing the electrostatic effect with the preferentially absorbed guest molecule for efficient multicomponent separation.

Thiadiazole-Functionalized Th/Zr-UiO-66 for Efficient C2H2/CO2 Separation

Adsorptive separation technology provides an effective approach for separating gases with similar physicochemical properties, such as the purification of acetylene (C2H2) from carbon dioxide (CO2). The high designability and tunability of metal-organic framework (MOF) adsorbents make them ideal design platforms for this challenging separation. Herein, we employ an isoreticular functionalization strategy to fine-tune the pore environment of Zr- and Th-based UiO-66 by the immobilization of the benzothiadiazole group via bottom-up synthesis. The functionalized UPC-120 exhibits an enhanced C2H2/CO2 separation performance, which is confirmed by adsorption isotherms, dynamic breakthrough curves, and theoretical simulations. The synergy of ligand functionalization and metal ion fine-tuning guided by isoreticular chemistry provides a new perspective for the design and development of adsorbents for challenging gas separation processes.

Crystal Engineering of a New Hexafluorogermanate Pillared Hybrid Ultramicroporous Material Delivers Enhanced Acetylene Selectivity

Hybrid ultramicroporous materials (HUMs), metal-organic platforms that incorporate inorganic pillars, are a promising class of porous solids. A key area of interest for such materials is gas separation, where HUMs have already established benchmark performances. Thanks to their ready compositional modularity, we report the design and synthesis of a new HUM, GEFSIX-21-Cu, incorporating the ligand pypz (4-(3,5-dimethyl-1H-pyrazol-4-yl)pyridine, 21) and GeF62- pillaring anions. GEFSIX-21-Cu delivers on two fronts: first, it displays an exceptionally high C2H2 adsorption capacity (≥5 mmol g-1) which is paired with low uptake of CO2 (<2 mmol g-1), and, second, a low enthalpy of adsorption for C2H2 (ca. 32 kJ mol-1). This combination is rarely seen in the C2H2 selective physisorbents reported thus far, and not observed in related isostructural HUMs featuring pypz and other pillaring anions. Dynamic column breakthrough experiments for 1:1 and 2:1 C2H2/CO2 mixtures revealed GEFSIX-21-Cu to selectively separate C2H2 from CO2, yielding ≥99.99% CO2 effluent purities. Temperature-programmed desorption experiments revealed full sorbent regeneration in <35 min at 60 °C, reinforcing HUMs as potentially technologically relevant materials for strategic gas separations.

Identifying pathways to metal-organic framework collapse during solvent activation with molecular simulations

Metal-organic framework (MOF) materials are a vast family of nanoporous solids with potential applications ranging from drug delivery to environmental remediation. Application of MOFs in these scenarios is hindered, however, by difficulties in MOF 'activation' after initial synthesis - removal of the synthesis solvent from the pores to make the pore space accessible - often leading to framework collapse if improperly performed. While experimental studies have correlated collapse to specific solvent properties and conditions, the mechanism of activation-collapse is currently unknown. Developing this understanding would enable researchers to create better activation protocols for MOFs, accelerating discovery and process intensification. To achieve this goal, we simulated solvent removal using grand-canonical Monte Carlo and free energy perturbation methods. By framing activation as a fluid desorption problem, we investigated activation processes in the isoreticular metal organic framework (IRMOF) family of MOFs for different solvents. We identified two pathways for solvent activation - the solvent either desorbs uniformly from each individual pore or forms coexisting phases during desorption. These mesophases in turn lead to large capillary stresses within the framework, corroborating experimental hypotheses for the cause of activation-collapse. Finally, we found that the activation energy of solvent removal increased with pore size and connectivity due to the increased stability of solvent mesophases, matching experimental findings. Using these simulations, it is possible to screen MOF activation procedures, enabling rapid identification of ideal solvents and conditions and thus enabling faster development of MOFs for practical applications.

Modulator-Dependent Dynamics Synergistically Enabled Record SO2 Uptake in Zr(IV) Metal-Organic Frameworks Based on Pyrene-Cored Molecular Quadripod Ligand

Developing innovative porous solid sorbents for the capture and storage of toxic SO2 is crucial for energy-efficient transportation and subsequent processing. Nonetheless, the quest for high-performance SO2 sorbents, characterized by exceptional uptake capacity, minimal regeneration energy requirements, and outstanding recyclability under ambient conditions, remains a significant challenge. In this study, we present the design of a unique tertiary amine-embedded, pyrene-based quadripod-shaped ligand. This ligand is then assembled into a highly porous Zr-metal-organic framework (MOF) denoted as Zr-TPA, which exhibits a newly discovered 3,4,8-c woy net structure. Remarkably, our Zr-TPA MOF achieved an unprecedented SO2 sorption capacity of 22.7 mmol g-1 at 298 K and 1 bar, surpassing those of all previously reported solid sorbents. We elucidated the distinct SO2 sorption behaviors observed in isostructural Zr-TPA variants synthesized with different capping modulators (formate, acetate, benzoate, and trifluoroacetate, abbreviated as FA, HAc, BA, and TFA, respectively) through computational analyses. These analyses revealed unexpected SO2-induced modulator-node dynamics, resulting in transient chemisorption that enhanced synergistic SO2 sorption. Additionally, we conducted a proof-of-concept experiment demonstrating that the captured SO2 in Zr-TPA-FA can be converted in situ into a valuable pharmaceutical intermediate known as aryl N-aminosulfonamide, with a high yield and excellent recyclability. This highlights the potential of robust Zr-MOFs for storing SO2 in catalytic applications. In summary, this work contributes significantly to the development of efficient SO2 solid sorbents and advances our understanding of the molecular mechanisms underlying SO2 sorption in Zr-MOF materials.

Three Robust Isoreticular Metal-Organic Frameworks with High-Performance Selective CO2 Capture and Separation

Based on the hard-soft acid base (HSAB) theory, three robust isoreticular metal-organic frameworks (MOFs) with nia topology were successfully synthesized by solvothermal reaction {[In3O(BHB)(H2O)3]NO3·3DMA (JLU-MOF110(In)), [Fe3O(BHB)(H2O)3]NO3 (JLU-MOF110(Fe)), and [Fe2NiO(BHB)(H2O)3] (JLU-MOF110(FeNi)) (DMA = N,N-dimethylacetamide, H6BHB = 4,4″-benzene-1,3,5-triyl-hexabenzoic acid)}. Both JLU-MOF110(In) and JLU-MOF110(Fe) are cationic frameworks, and their BET surface areas are 301 and 446 m2/g, respectively. By modification of the components of metal clusters, JLU-MOF110(FeNi) features a neutral framework, and the BET surface area is increased up to 808 m2/g. All three MOF materials exhibit high chemical and thermal stability. JLU-MOF110(In) remains stable for 24 h at pH values ranging from 1 to 11, while JLU-MOF110(Fe) and JLU-MOF110(FeNi) persist to be stable for 24 h at pH from 1 to 12. JLU-MOF110(In) exhibits thermal stability up to 350 °C, whereas JLU-MOF110(Fe) and JLU-MOF(FeNi) can be stable up to 300 °C. Thanks to the microporous cage-based structure and abundant open metal sites, JLU-MOF110(In), JLU-MOF110(Fe), and JLU-MOF110(FeNi) have excellent CO2 capture capacity (28.0, 51.5, and 99.6 cm3/g, respectively, under 298 K and 1 bar). Interestingly, the ideal adsorption solution theory results show that all three MOFs exhibit high separation selectivity toward CO2 over N2 (35.2, 43.2, and 43.2 for CO2/N2 = 0.15/0.85) and CO2 over CH4 (14.4, 11.5, and 10.1 for CO2/CH4 = 0.5/0.5) at 298 K and 1 bar. Thus, all three MOFs are potential candidates for CO2 capture and separation. Among them, JLU-MOF110(FeNi) displays the best separation potential, as revealed by dynamic column breakthrough experiments.

Carbon dioxide adsorption to UiO-66: theoretical analysis of binding energy and NMR properties

UiO-66 is one of the most valuable metal-organic frameworks because of its excellent adsorption capability for gas molecules and its high stability towards water. Herein we investigated adsorption of carbon dioxide (CO2), acetone, and methanol to infinite UiO-66 using DFT calculations on an infinite system under periodic-boundary conditions and post-Hartree-Fock (SCS-MP2 and MP2.5) calculations on cluster models. Three to four molecules are adsorbed at each of four μ-OH groups bridging three Zr atoms in one unit cell (named Site I). Six molecules are adsorbed around three pillar ligands, where the molecule is loosely surrounded by three terephthalate ligands (named Site II). Also, six molecules are adsorbed around the pillar ligand in a different manner from that at Site II, where the molecule is surrounded by three terephthalate ligands (named Site III). Totally fifteen to sixteen CO2 molecules are adsorbed into one unit cell of UiO-66. The binding energy (BE) decreases in the order Site I > Site III > Site II for all three molecules studied here and in the order acetone > methanol ≫ CO2 in the three adsorption sites. At the site I, the protonic H atom of the μ-OH group interacts strongly with the negatively charged O atom of CO2, acetone and methanol, which is the origin of the largest BE value at this site. Although the DFT calculations present these decreasing orders of BE values correctly, the correction by post-Hartree-Fock calculations is not negligibly small and must be added for obtaining better BE values. We explored NMR spectra of UiO-66 with adsorbed CO2 molecules and found that the isotropic shielding constants of the 1H atom significantly differ among no CO2, one CO2 (at Sites I, II, or III), and fifteen CO2 adsorption cases (Sites I to III) but the isotropic 17O and 13C shielding constants change moderately by adsorption of fifteen CO2 molecules. Thus, 1H NMR measurement is a useful experiment for investigating CO2 adsorption.

An ethynyl-modified interpenetrated metal-organic framework for highly efficient selective gas adsorption

An ethynyl-modified interpenetrated MOF material with lvt topology, [Cu2(BTEB)(NMF)2]·NMF·8H2O (compound 1, H4BTEB = 4,4',4'',4'''-(benzene-1,2,4,5-tetrayltetrakis(ethyne-2,1-diyl))tetrabenzoic acid, NMF = N-Methylformamide), was successfully synthesized by using an alkynyl-functionalized H4BTEB organic ligand under solvothermal conditions. Structural analysis shows that compound 1, consisting of a tetradentate carboxylic acid ligand and classical [Cu2(CO2)4] paddle-wheel structure building units, has a rare 4-connected lvt topology with dual interpenetrating structure, which can improve the framework stability, as well as the gas adsorption capacity and selectivity due to the restricted pore channel. According to the study of gas adsorption performance, compound 1 with a larger surface area, boasts a superior adsorption capacity for small gas molecules. Also, ideal adsorption solution theory (IAST) computational simulation shows that compound 1 has good gas adsorption selectivity for C3H8/CH4, indicating its potential application in gas separation.

Highly-Controlled Soft-Templating Synthesis of Hollow ZIF-8 Nanospheres for Selective CO2 Separation and Storage

Global warming is an ever-rising environmental concern, and carbon dioxide (CO2) is among its major causes. Different technologies, including adsorption, cryogenic separation, and sequestration, have been developed for CO2 separation and storage/utilization. Among these, carbon capture using nano-adsorbents has the advantages of excellent CO2 separation and storage performance as well as superior heat- and mass-transfer characteristics due to their large surface area and pore volume. In this work, an environmentally friendly, facile, bottom-up synthesis of ZIF-8 hollow nanospheres (with reduced chemical consumption) was developed for selective CO2 separation and storage. During this soft-templating synthesis, a combined effect of ultra-sonication and low-temperature hydrothermal synthesis showed better control over an oil-in-water microemulsion formation and the subsequent growth of large-surface-area hollow ZIF-8 nanospheres having excellent particle size distribution. Systematic studies on the synthesis parameters were also performed to achieve fine-tuning of the ZIF-8 crystallinity, hollow structures, and sphere size. The optimized hollow ZIF-8 nanosphere sample having uniform size distribution exhibited remarkable CO2 adsorption capability (∼2.24 mmol g-1 at 0 °C and 1.75 bar), a CO2/N2 separation selectivity of 12.15, a good CO2 storage capacity (1.5-1.75 wt %), and an excellent cyclic adsorption/desorption performance (up to four CO2 adsorption/desorption cycles) at 25 °C. In addition, the samples showed exceptional structural stability with only ∼15% of overall weight loss up to 600 °C under a nitrogen environment. Therefore, the hollow ZIF-8 nanospheres as well as their highly controlled soft-templating synthesis method reported in this work are useful in the course of the development of nanomaterials with optimized properties for future CO2 capture technologies.

Influence of ligands within Al-based metal-organic frameworks for selective separation of methane from unconventional natural gas

Efficient CH₄/N₂ separation from unconventional natural gas is vital for both energy recycling and climate change control. Figuring out the reason for the disparity between ligands in the framework and CH₄ is the crucial problem for developing adsorbents in PSA progress. In this study, a series of eco-friendly Al-based MOFs, including Al-CDC, Al-BDC, CAU-10, and MIL-160, were synthesized to investigate the influence of ligands on CH₄ separation through experimental and theoretical analyses. The hydrothermal stability and water affinity of synthetic MOFs were explored through experimental characterization. The active adsorption sites and adsorption mechanisms were investigated via quantum calculation. The results manifested that the interactions between CH₄ and MOFs materials were affected by the synergetic effects of pore structure and ligand polarities, and the disparities of ligands within MOFs determined the separation efficiency of CH₄. Especially, the CH₄ separation performance of Al-CDC with high sorbent selection (68.56), moderate isosteric adsorption heat for CH₄ (26.3 kJ/mol), and low water affinity (0.1 g/g at 40% RH) was superior to most porous adsorbents, which was attributed to its nanosheet structure, proper polarity, reduced local steric hindrance, and extra functional groups. The analysis of active adsorption sites indicated that hydrophilic carboxyl groups and hydrophobic aromatic ring were the dominant CH₄ adsorption sites for liner ligands and bent ligands, respectively. The methylene groups with saturated C-H bonds enhanced the wdV interaction between ligands and CH₄, resulting in the highest binding energy of CH₄ for Al-CDC. The results provided valuable guidance for the design and optimization of high-performance adsorbents for CH₄ separation from unconventional natural gas.

Ultramicroporous iron-isonicotinate MOFs combining size-exclusion kinetics and thermodynamics for efficient CO2/N2 gas separation

Two ultramicroporous 2D and 3D iron-based Metal-Organic Frameworks (MOFs) have been obtained by solvothermal synthesis using different ratios and concentrations of precursors. Their reduced pore space decorated with pendant pyridine from tangling isonicotinic ligands enables the combination of size-exclusion kinetic gas separation, due to their small pores, with thermodynamic separation, resulting from the interaction of the linker with CO2 molecules. This combined separation results in efficient materials for dynamic breakthrough gas separation with virtually infinite CO2/N2 selectivity in a wide operando range and with complete renewability at room temperature and ambient pressure.

Mechanochemistry Milling of Waste Poly(Ethylene Terephthalate) into Metal-Organic Frameworks

Converting poly(ethylene terephthalate) (PET) into metal-organic frameworks (MOFs) has emerged as a promising innovation for upcycling of waste plastics. However, previous solvothermal methods suffer from toxic solvent consumption, long reaction time, high pressure, and high temperature. Herein, a mechanochemical milling strategy was reported to transform waste PET into a series of MOFs with high yields. This strategy had the merits of solvent-free conditions, ambient reaction temperature, short running time, and easy scale-up for large-scale production of MOFs. The as-prepared MOFs exhibited definite crystal structure and porous morphology composed of agglomerated nanoparticles. It was proven that, under mechanochemical milling, PET was firstly decomposed into 1,4-benzenedicarboxylate, which acted as linkers to coordinate with metal ions for forming fragments, followed by the gradual arrangement of fragments into MOFs. This work not only promotes high value-added conversion of waste polyesters but also offers a new opportunity to produce MOFs in a green and scalable manner.

Computer simulation of the early stages of self-assembly and thermal decomposition of ZIF-8

We employ all-atom well-tempered metadynamics simulations to study the mechanistic details of both the early stages of nucleation and crystal decomposition for the benchmark metal–organic framework (MOF) ZIF-8. To do so, we developed and validated a force field that reliably models the modes of coordination bonds via a Morse potential functional form and employs cationic and anionic dummy atoms to capture coordination symmetry. We also explored a set of physically relevant collective variables and carefully selected an appropriate subset for our problem at hand. After a rapid increase of the Zn–N connectivity, we observe the evaporation of small clusters in favor of a few large clusters, which leads to the formation of an amorphous highly connected aggregate. [Formula: see text] and [Formula: see text] complexes are observed with lifetimes in the order of a few picoseconds, while larger structures, such as four-, five-, and six-membered rings, have substantially longer lifetimes of a few nanoseconds. The free ligands act as “templating agents” for the formation of sodalite cages. ZIF-8 crystal decomposition results in the formation of a vitreous phase. Our findings contribute to a fundamental understanding of MOF’s synthesis that paves the way to controlling synthesis products. Furthermore, our developed force field and methodology can be applied to model solution processes that require coordination bond reactivity for other ZIFs besides ZIF-8.

Increased CO2 Affinity and Adsorption Selectivity in MOF-801 Fluorinated Analogues

The novel Zr^IV-based perfluorinated metal-organic framework (PF-MOF) [Zr₆O₄(OH)₄(TFS)₆] (ZrTFS) was prepared under solvent-free conditions using the commercially available tetrafluorosuccinic acid (H₂TFS) as a bridging ditopic linker. Since H₂TFS can be seen as the fully aliphatic and perfluorinated C₄ analogue of fumaric acid, ZrTFS was found to be isoreticular to zirconium fumarate (MOF-801). The structure of ZrTFS was solved and refined from X-ray powder diffraction data. Despite this analogy, the gas adsorption capacity of ZrTFS is much lower than that of MOF-801; in the former, the presence of bulky fluorine atoms causes a considerable window size reduction. To have PF-MOFs with more accessible porosity, postsynthetic exchange (PSE) reactions on (defective) MOF-801 suspended in H₂TFS aqueous solutions were carried out. Despite the different H₂TFS concentrations used in the PSE process, the exchanges yielded two mixed-linker materials of similar minimal formulae [Zr₆O₄(μ₃-OH)₄(μ₁-OH)_2.08(H₂O)_2.08(FUM)_4.04(HTFS)_1.84] (PF-MOF1) and [Zr₆O₄(μ₃-OH)₄(μ₁-OH)_1.83(H₂O)_1.83(FUM)_4.04(HTFS)_2.09] (PF-MOF2) (FUM^2- = fumarate), where the perfluorinated linker was found to fully replace the capping acetate in the defective sites of pristine MOF-801. CO₂ and N₂ adsorption isotherms collected on all samples reveal that both CO₂ thermodynamic affinity (isosteric heat of adsorption at zero coverage, Q_st) and CO₂/N₂ adsorption selectivity increase with the amount of incorporated TFS^2-, reaching the maximum values of 30 kJ mol^-1 and 41 (IAST), respectively, in PF-MOF2. This confirms the beneficial effect coming from the introduction of fluorinated linkers in MOFs on their CO₂ adsorption ability. Finally, solid-state density functional theory calculations were carried out to cast light on the structural features and on the thermodynamics of CO₂ adsorption in MOF-801 and ZrTFS. Due to the difficulties in modeling a defective MOF, an intermediate structure containing both linkers in the framework was also designed. In this structure, the preferential CO₂ adsorption site is the tetrahedral pore in the "UiO-66-like" structure. The extra energy stabilization stems from a hydrogen bond interaction between CO₂ and a hydroxyl group on the inorganic cluster.

Customizing Pore System in a Microporous Metal–Organic Framework for Efficient C2H2 Separation from CO2 and C2H4

Selective-adsorption separation is an energy-efficient technology for the capture of acetylene (C2H2) from carbon dioxide (CO2) and ethylene (C2H4). However, it remains a critical challenge to effectively recognize C2H2 among CO2 and C2H4, owing to their analogous molecule sizes and physical properties. Herein, we report a new microporous metal–organic framework (NUM-14) possessing a carefully tailored pore system containing moderate pore size and nitro-functionalized channel surface for efficient separation of C2H2 from CO2 and C2H4. The activated NUM-14 (namely NUM-14a) exhibits sufficient pore space to acquire excellent C2H2 loading capacity (4.44 mmol g−1) under ambient conditions. In addition, it possesses dense nitro groups, acting as hydrogen bond acceptors, to selectively identify C2H2 molecules rather than CO2 and C2H4. The breakthrough experiments demonstrate the good actual separation ability of NUM-14a for C2H2/CO2 and C2H2/C2H4 mixtures. Furthermore, Grand Canonical Monte Carlo simulations indicate that the pore surface of the NUM-14a has a stronger affinity to preferentially bind C2H2 over CO2 and C2H4 via stronger C-H···O hydrogen bond interactions. This article provides some insights into customizing pore systems with desirable pore sizes and modifying groups in terms of MOF materials toward the capture of C2H2 from CO2 and C2H4 to promote the development of more MOF materials with excellent properties for gas adsorption and separation.

Recent advances in direct air capture by adsorption

Significant progress has been made in direct air capture (DAC) in recent years. Evidence suggests that the large-scale deployment of DAC by adsorption would be technically feasible for gigatons of CO₂ capture annually. However, great efforts in adsorption-based DAC technologies are still required. This review provides an exhaustive description of materials development, adsorbent shaping, in situ characterization, adsorption mechanism simulation, process design, system integration, and techno-economic analysis of adsorption-based DAC over the past five years; and in terms of adsorbent development, affordable DAC adsorbents such as amine-containing porous materials with large CO₂ adsorption capacities, fast kinetics, high selectivity, and long-term stability under ultra-low CO₂ concentration and humid conditions. It is also critically important to develop efficient DAC adsorptive processes. Research and development in structured adsorbents that operate at low-temperature with excellent CO₂ adsorption capacities and kinetics, novel gas-solid contactors with low heat and mass transfer resistances, and energy-efficient regeneration methods using heat, vacuum, and steam purge is needed to commercialize adsorption-based DAC. The synergy between DAC and carbon capture technologies for point sources can help in mitigating climate change effects in the long-term. Further investigations into DAC applications in the aviation, agriculture, energy, and chemical industries are required as well. This work benefits researchers concerned about global energy and environmental issues, and delivers perspective views for further deployment of negative-emission technologies.

Exploring the Impact of the Linker Length on Heat Transport in Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are a highly versatile group of porous materials suitable for a broad range of applications, which often crucially depend on the MOFs' heat transport properties. Nevertheless, detailed relationships between the chemical structure of MOFs and their thermal conductivities are still largely missing. To lay the foundations for developing such relationships, we performed non-equilibrium molecular dynamics simulations to analyze heat transport in a selected set of materials. In particular, we focus on the impact of organic linkers, the inorganic nodes and the interfaces between them. To obtain reliable data, great care was taken to generate and thoroughly benchmark system-specific force fields building on ab-initio-based reference data. To systematically separate the different factors arising from the complex structures of MOF, we also studied a series of suitably designed model systems. Notably, besides the expected trend that longer linkers lead to a reduction in thermal conductivity due to an increase in porosity, they also cause an increase in the interface resistance between the different building blocks of the MOFs. This is relevant insofar as the interface resistance dominates the total thermal resistance of the MOF. Employing suitably designed model systems, it can be shown that this dominance of the interface resistance is not the consequence of the specific, potentially weak, chemical interactions between nodes and linkers. Rather, it is inherent to the framework structures of the MOFs. These findings improve our understanding of heat transport in MOFs and will help in tailoring the thermal conductivities of MOFs for specific applications.

Shell-like Xenon Nano-Traps within Angular Anion-Pillared Layered Porous Materials for Boosting Xe/Kr Separation

Adsorptive separation of xenon (Xe) and krypton (Kr) is a promising technique but remains a daunting challenge since they are atomic gases without dipole or quadruple moments. Herein we report a strategy for fabricating angular anion-pillared materials featuring shell-like Xe nano-traps, which provide a cooperative effect conferred by the pore confinement and multiple specific interactions. The perfect permanent pore channel (4-5 Å) of Ni(4-DPDS)₂ MO₄ (M=Cr, Mo, W) can host Xe atoms efficiently even at ultra-low concentration (400 ppm Xe), showing the second-highest selectivity of 30.2 in Ni(4-DPDS)₂ WO₄ and excellent Xe adsorption capacity in Ni(4-DPDS)₂ CrO₄ (15.0 mmol kg^-1 ). Crystallography studies and DFT-D calculations revealed the energy favorable binding sites and angular anions enable the synergism between optimal pore size and polar porosity for boosting Xe affinity. Dynamic breakthrough experiments demonstrated three MOFs as efficient adsorbents for Xe/Kr separation.

Nickel-Based Metal-Organic Frameworks for Coal-Bed Methane Purification with Record CH4 /N2 Selectivity

The enrichment and purification of coal-bed methane provides a source of energy and helps offset global warming. In this work, we demonstrate a strategy involving the regulation of the pore size and pore chemistry to promote the separation of CH₄ /N₂ mixtures in four nickel-based coordination networks, named Ni(ina)₂ , Ni(3-ain)₂ , Ni(2-ain)₂ , and Ni(pba)₂ , (where ina=isonicotinic acid, 3-ain=3-aminoisonicotinic acid, 2-ain=2-aminoisonicotinic acid, and pba=4-(4-pyridyl)benzoic acid). Among them, Ni(ina)₂ and Ni(3-ain)₂ can effectively separate CH₄ from N₂ with top-performing performance because of the suitable pore size (≈0.6 and 0.5 nm) and pore environment. Explicitly, Ni(ina)₂ exhibits the highest ever reported CH₄ /N₂ selectivity of 15.8 and excellent CH₄ uptake (40.8 cm³  g^-1 ) at ambient conditions, thus setting new benchmarks for all reported MOFs and traditional adsorbents. The exceptional CH₄ /N₂ separation performance of Ni(ina)₂ is confirmed by dynamic breakthrough experiments. Under different CH₄ /N₂ ratios, Ni(ina)₂ selectively extracts methane from the gaseous blend and produces a high purity of CH₄ (99 %). Theoretical calculations and CH₄ -loading single-crystal structure analysis provide critical insight into the adsorption/separation mechanism. Ni(ina)₂ and Ni(3-ain)₂ can form rich intermolecular interactions with methane, indicating a strong adsorption affinity between pore walls and CH₄ molecules. Importantly, Ni(ina)₂ has good thermal and moisture stability and can easily be scaled up at a low cost ($25 per kilogram), which will be valuable for potential industrial applications. Overall, this work provides a powerful approach for the selective adsorption of CH₄ from coal-bed methane.