A comprehensive compendium of literature of 1,8-Naphthalimide based chemosensors from 2017 to 2021

Colorimetric pH-sensing of artificial gastric fluid using naphthalimide-based CH acids

In this study, we introduce novel colorimetric pH-sensing probes based on naphthalimide malonate derivatives. These probes were synthesized by reacting 4-bromo-1,8-naphthalimide with various malonates, including malononitrile, ethyl cyanoacetate, and diethyl malonate. Each derivative exhibited distinct pH-sensing characteristics due to their differing CH acidities. The malononitrile-based probe, NPI-N2, demonstrated pronounced chromogenic pH-signaling behavior, transitioning from colorless to red-violet, accompanied by a decrease in fluorescence intensity. Notably, NPI-N2 retained its pH-sensing capability in the presence of common metal ions, anions, and pepsin, a key component of gastric fluid. The pKa of NPI-N2 was determined to be 3.08 through pH-dependent absorbance curve fitting. To modulate the pH-sensing range, ester-nitrile (NPI-EN) and diethyl ester (NPI-E2) subunits were incorporated into the naphthalimide framework, resulting in increased pKa values of 6.73 and 10.76, respectively. The pH-signaling mechanism of NPI-N2 was elucidated by 1H and 13C NMR spectroscopy, revealing deprotonation of the malononitrile moiety and subsequent resonance extension through the naphthalimide structure. To facilitate practical pH determination, NPI-N2 was integrated into a paper-based test strip, enabling convenient and reliable pH measurement of artificial gastric fluid.

Application of RET Approach for Ratiometric Response Enhancement of ICT Fluorescent Hg2+ Probe based on Crown-containing Styrylpyridinium Dye

Styrylpyridinium dye bearing azadithia-15-crown-5 ether receptor group SP and 4-alkoxy-1,8-naphthalimide fluorophore were linked using copper-catalyzed azide-alkyne cycloaddition click reaction to afford dyad compound NI-SP. Chemosensor NI-SP exhibited selective ratiometric fluorescent response to the presence of Hg2+ in aqueous solution due to the interplay between resonance energy transfer (RET) and intramolecular charge transfer (ICT) processes occurred upon excitation. The observed switching of the ratio of emission intensities in the blue and red channels R was higher than in the case of monochromophoric styrylpyridine derivative SP showing ratiometric response based on ICT mechanism only. Biological studies revealed that NI-SP penetrates into human lung adenocarcinoma A549 cells and accumulates in cytoplasm and lysosomes. When cells were pre-incubated with mercury (II) perchlorate, the ratio R was increased 2.6 times, which enables detection of intracellular Hg2+ ions and their quantitative analysis in the 0.7-6.0 μM concentration range.

Synthesis and Photophysical Properties of 4'-5' Disubstituted CinNapht Dyes Accessible through Double SNAr Late-Stage Functionalization

This article describes the synthesis of a difluorinated CinNapht derivative in the 4' and 5' positions allowing the easy access to two new families of fluorophores by late-stage functionalization using SNAr. The first one comprises derivatives incorporating hindered aromatic amines in the 4' and 5' positions, which show red-emission in apolar solvents. The second one is obtained through the use of dinucleophiles. Among them, Tetrahydroquinoxaline (THQ) and tetrahydrobenzodiazepine (THB) compounds show strongly redshifted emission. The photophysical properties of all the fluorophores in these two families are studied and rationalized by DFT and TDDFT calculations. The most promising compounds have been used to image living cells by confocal microscopy.

Novel 1,8-Naphthalimide Derivatives Inhibit Growth and Induce Apoptosis in Human Glioblastoma

Given the rapid advancement of functional 1,8-Naphthalimide derivatives in anticancer research, we synthesized these two novel naphthalimide derivatives with diverse substituents and investigated the effect on glioblastoma multiforme (GBM) cells. Cytotoxicity, apoptosis, cell cycle, topoisomerase II and Western blotting assays were evaluated for these compounds against GBM in vitro. A human GBM xenograft mouse model established by subcutaneously injecting U87-MG cells and the treatment responses were assessed. Both compounds 3 and 4 exhibited significant antiproliferative activities, inducing apoptosis and cell death. Only compound 3 notably induced G2/M phase cell cycle arrest in the U87-MG GBM cells. Both compounds inhibited DNA topoisomerase II activity, resulting in DNA damage. The in vivo antiproliferative potential of compound 3 was further validated in a U87-MG GBM xenograft mouse model, without any discernible loss of body weight or kidney toxicity noted. This study presents novel findings demonstrating that 1,8-Naphthalimide derivatives exhibited significant GBM cell suppression in vitro and in vivo without causing adverse effects on body weight or kidney function. Further experiments, including investigations into mechanisms and pathways, as well as preclinical studies on the pharmacokinetics and pharmacodynamics, may be instrumental to the development of a new anti-GBM compound.

Sequential effects of two cations on the fluorescence emission of a coordination polymer with Zn4O core in node

Distinct changes in the fluorescence emissions of free ligand 5-(1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl)isophthalic acid (H2NAPHISO) than a 2D-zinc-coordination polymer of it, caused by sequential interactions with different sets of binary cations were observed. The coordination polymer having unsymmetrical Zn4O core of tetranuclear zinc-node could be dispersed in dimethylformamide without its degradation. The coordination polymer had an emission peak at 435 nm (quantum yield = 0.082) which was selectively quenched by adding Fe2+ ions. Based on this quenching, the Fe2+ ions in aqueous solution could be detected with a detection limit 42.57 nM. The metal ions such as Li+, Na+, Cd2+, Hg2+, Al3+ did not interfere in the detection; but each of these ions together with Fe2+ ions showed characteristic shift of the emission spectra. The H2NAPHISO in dimethyl formamide was non-fluorescent, but showed emission at 452 nm upon addition of Cd2+ or Zn2+ ions. This new emission of H2NAPHISO caused by zinc or cadmium ions was not quenched by Fe2+ ions. Various cations had affected the emission of the H2NAPHISO with Zn2+ which was much different from the corresponding changes caused by the same ion on the emission of the coordination polymer. For example, the Mn2+ and Zn2+ ions together in a solution of the ligand showed a broad emission spectrum spreading over 380-450 nm, but ions Sn2+ and Zn2+ together had showed emission at a shorter wavelength (380 nm). These allowed to modulate the emission of the ligand by binary combination of metal ions.

A Naphthalimide Based "Turn-ON" Probe for Wash-Free Imaging of Lipid-Droplet in Living Cells With an Excellent Selectivity

The impacts of dimethylation of 4-Amino-1,8-Naphthalimide (ANI) on its photophysical properties are reported. The resulting 4-DiMe-ANI displays completely different fluorescence properties, conferring it ability to selectively label lipid droplets in living cells. A comprehensive photophysical study revealed that this selectivity arises from an Internal Charge Transfer favored in lipophilic media to the detriment of a non-emissive TICT in more polar media. This results in a very high "LDs/Cytosol" signal ratio, enabling LDs to be imaged with an excellent signal-to-noise ratio, and positioning its performance above that of the BODIPY 493/503 commonly used to image LDs.

Bi-component sensing platform for the detection of Cd2+, Fe2+and Fe3+ ions

The ability of N-(1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl)isonicotinamide (naphydrazide) or 2,6-pyridinedicarboxylic acid (2,6-H2pdc) individually or as a bi-component system in distinguishing and detecting Fe3+ or Fe2+ and Cd2+ ions was investigated. The use of these molecules as single or bi-component analytes in absorption or emission spectroscopy studies showed that under specific conditions each had their own merits for specific purposes. UV-visible spectroscopic studies of 2,6-H2pdc for assessing the interactions with ferrous and ferric ions showed characteristic distinctions. The detection limit for Fe3+ analysed through UV-visible spectroscopy using naphydrazide was 0.46 μM, whereas it was 1.28 μM using 2,6-H2pdc. Naphydrazide together with Fe3+ allowed distinguishing Cd2+ ions from Zn2+ and Fe2+ ions. The bi-component system was useful for the selective detection of Cd2+ ions using fluorescence spectroscopy, with a detection limit for Cd2+ ions of 18.31 μM. The presence of Fe2+ and Cd2+ ions in a solution of the bi-component had resulted white-light emission. An analogous compound N,N'-(1,3,6,8-tetraoxobenzo[lmn][3,8]phenanthroline-2,7(1H,3H,6H,8H)-diyl)diisonicotinamide (binaphydrazide) was found unsuitable for such detections. Two 2,6-pyridinedicarboxylate Fe3+ complexes possessing protonated naphydrazide or binaphydrazide were prepared and characterised. These complexes were also found unsuitable for the detection of the said ions in solution. Electrochemical studies with the bi-component system showed that cyclic voltammograms could distinguish Fe3+ or Fe2+ from Cd2+ ions.

Mercury (Hg2+) Sensing Using Coumarin-Derived Fluorescent Chemo-Sensors: An Intuitive Development from 2015 to 2023

Mercury is known as a highly toxic metal that is poisonous even if present in a trace amount. Generally, it enters in the food chain (especially fish) and water resources via different pathways and leads to harmful effects. Owing to the detrimental nature of the metal, traditionally several methods were employed by researchers for regular monitoring of the mercury metal ions. However, these methods are associated with many limitations like high cost of technical expertise, and intricacy of the detection procedure. So, using these methods to detect mercury ions in real time is challenging. Therefore, in recent years fluorescent-based analytical tools emerged rapidly. Among the various fluorescent organic scaffolds, coumarin has been scorching, owing to quick response, light stability, high sensitivity, good selectivity, excellent fluorescence intensity, and fluorescence quantum yield. This review provides a deep dive into the coumarin-derived chemo-sensors development throughout 2015-2023. We anticipate that the review will assist to broad scientific community as a reference document to design more interesting sensors.

A 1,8-Naphthalimide-based Tripodal Fluorescent Chemosensor to Selectively Detect Copper Ions

A 1,8-naphthalimide-based tripodal fluorescent ligand (L3) was synthesized through the copper (I) catalyzed Huisgen azide-alkyne cycloaddition reaction of 2-(2-azidoethyl)-6-morpholino-1 H-benzo[de]isoquinoline-1,3(2 H)-dione with triproparagylamine. Naphthalimide acts as the fluorophore while the triazole and amine nitrogens chelate the metal ion. L3 showed a selective fluorescence turn-off for Cu(II) over other metal ions in aqueous acetonitrile solution. A Job's plot, Benesi-Hildbrand plot and high-resolution mass spectrometry data confirm a 1:1 binding stoichiometry with a binding constant of 7.8 х105 M- 1 while addition of disodium EDTA demonstrates its reversibility. The structure and stability of the complex was supported by theoretical calculations. The limit of detection for Cu(II) was calculated to be 0.3 µM which is considerably lower than WHO recommended Cu(II) limit in drinking water.

Naphthalimide-based new architecture for fluorescence turn-on sensing of Cu2+ and colorimetric detection of F-/CN. Methods 2024;225:13-19. [PMID: 38438060 DOI: 10.1016/j.ymeth.2024.02.009] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

A new molecular structure 1 has been developed on naphthalimide motif. The amine and triazole binding groups have been employed at the 4-position of naphthalimide to explore the sensing behavior of molecule 1. Single crystal x-ray diffraction and other spectroscopic techniques confirm the identity of 1. Compound 1 exhibits high selectivity and sensitivity for Cu2+ ions in CH3CN. The binding of Cu2+ shows ∼ 70-fold enhancement in emission at 520 nm. The binding follows 1:1 interaction and the detection limit is determined to be 6.49 × 10-7 M. The amine-triazole binding site in 1 also corroborates the detection of F- through a colour change in CH3CN. Initially H-bonding and then deprotonation of amine -NH- in the presence of F- are the sequential steps involved in F- recognition with a detection limit of 4.13 × 10-7 M. Compound 1 is also sensible to CN- like F- ion and they are distinguished by Fe3+ ion. Cu2+-ensemble of 1 fluorimetrically recognizes F- among the tested anions and vice-versa. The collaborative effect of amine and triazole motifs in the binding of both Cu2+ and F-/CN- has been explained by DFT calculation.

A Self-Accelerating Naphthalimide-Based Probe Coupled with Upconversion Nanoparticles for Ultra-Accurate Tri-Mode Visualization of Hydrogen Peroxide

The design and development of ultra-accurate probe is of great significance to chemical sensing in complex practical scenarios. Here, a self-accelerating naphthalimide-based probe with fast response and high sensitivity toward hydrogen peroxide (H2O2) is designed. By coupling with the specially selected upconversion nanoparticles (UCNPs), an ultra-accurate colorimetric-fluorescent-upconversion luminescence (UCL) tri-mode platform is constructed. Owing to the promoted reaction process, this platform demonstrates rapid response (< 1 s), an ultra-low detection limit (4.34 nM), and superb anti-interferent ability even in presence of > 21 types of oxidants, explosives, metallic salts, daily compounds, colorful or fluorescent substances. In addition, the effectiveness of this design is further verified by a sponge-based sensing chip loaded with the UCNPs/probe in recognizing trace H2O2 vapor from interferents with the three characteristic colors existing simultaneously. The proposed design of probe and tri-mode visualization detection platform is expected to open up a brand-new methodology for ultra-accurate sensing.

A reversible fluorescent sensor for continuous detection of fluoride ion and trace water in chemical reagents

Continuously monitorable fluorescence sensors can provide fast, immediate, in-field detection of analytes without tedious process. A simple fluorescent sensor (BN) constructed from naphthol Schiff base was developed for reversible monitoring of F- and trace water. Sensor BN showed specific selectivity toward F- over other anions giving rise to a fluorescence "turn-on" response. After added F-, the BN solution caused a dramatically observable color change from non-fluorescence to blue-green, and the limit of detection reached 78.5 nM. The Job's and 1H NMR analysis confirmed that the recognition mechanism could be concluded to F- caused deprotonation of sensor BN by hydrogen bonding interaction. Moreover, the deprotonated form BN∙F obtained by using F- was acted as excellent sensitivity sensor for trace water detection with instant response through reprotonation. After addition of trace water, the emission color and spectral signal of BN∙F reverted to the original BN sate with the limit of detection of 0.0011 %. The reversible detection characteristic was conducive to the development of an inkless writing and encryption device. And importantly, BN∙F was utilized as a promising fluorescent sensor in the quantitative determination of water content in routinely chemical reagents.

Visualization of an Endogenous Mitochondrial Azoreductase Activity under Normoxic Conditions Using a Naphthalimide Azo-Based Fluorogenic Probe

In this paper, we demonstrate the existence of an endogenous mitochondrial azoreductase (AzoR) activity that can induce the cleavage of N═N double bonds of azobenzene compounds under normoxic conditions. To this end, 100% OFF-ON azo-based fluorogenic probes derived from 4-amino-1,8-naphthalimide fluorophores were synthesized and evaluated. The in vitro study conducted with other endogenous reducing agents of the cell, including reductases, demonstrated both the efficacy and the selectivity of the probe for AzoR. Confocal experiments with the probe revealed an AzoR activity in the mitochondria of living cells under normal oxygenation conditions, and we were able to demonstrate that this endogenous AzoR activity appears to be expressed at different levels across different cell lines. This discovery provides crucial information for our understanding of the biochemical processes occurring within the mitochondria. It thus contributes to a better understanding of its function, which is implicated in numerous pathologies.

Highly selective Cu2+ detection with a naphthalimide-functionalised pillar[5]arene fluorescent chemosensor

Ligand 1, a rim-differentiated pillar[5]arene macrocycle modified with five naphthalimide groups through click chemistry, serves as an effective ratiometric fluorescent chemosensor for Cu2+. In contrast to the monomeric naphthalimide control compound 2, which shows only monomer emission, ligand 1 demonstrates dual emission characteristics encompassing both the monomer and excimer of the naphthalimide moieties. The binding properties of ligand 1 toward 15 different metal ions were systematically investigated in CH2Cl2/CH3CN (v/v, 1 : 1) by UV-vis and fluorescence spectroscopy. Remarkably, ligand 1 exhibits exceptional selectivity for Cu2+ ions. Upon complexation with Cu2+, the excimer emission of ligand 1 diminishes, concomitant with an enhancement of its monomer emission. The binding ratio for 1·Cu2+ was determined to be 1 : 1, with an association constant of (3.39 ± 0.40) × 105 M-1 calculated using a nonlinear least-squares curve-fitting method. Furthermore, the limit of detection (LOD) was found to be 185 ± 7 nM. Our results from 1H NMR titration, high-resolution mass spectrometry analysis and density functional theory calculations of 1·Cu2+ suggest synergistic coordination between Cu2+ and the triazole groups on ligand 1.

The how and why of naphthalimide/heterocycle-fused hybrid dyes: an overview of the latest developments in the quest for dyes with innovative optical properties

In this review, a variety of hybrid structures fusing aromatic heterocycles of different natures to a naphthalimide backbone are discussed. This strategy constitutes an efficient approach to generate original structures displaying singular photophysical properties and thus offering new perspectives in the fields of fluorogenic detection, optoelectronics, and photodynamic therapy. In this review, different synthetic approaches and structures reported in the literature are discussed. A critical look at the design and the applications of these new fused hybrids allows us to evaluate the benefits and drawbacks of a fused hybrid strategy applied to naphthalimides.

Polysiloxane-Based Molecular Logic Gate for Dual-Channel Visualizing Mitochondrial pH and Sulphite Changes during Cuproptosis

Intracellular Cu-induced regulated cell death, characterized by the aggregation of lipidizing mitochondrial enzymes, is called cuproptosis. Mitochondria play a vital role in the metabolic regulation of cell injury and stressful immune responses. The pH levels and sulfur dioxide (SO2) content in mitochondria have important indicative roles in the regulation of cuproptosis. However, fluorescent probes that simultaneously detect changes in pH and SO2 in mitochondria during cuprotosis have not been reported. To fill this blank, in this study, we dexterously used functional polysiloxane as a fluorescent platform to propose a molecular logic gate probe P0-pH-SO2 for detecting changes in intramitochondrial pH and SO2 content through a dual-channel mode. In addition, we defined a new function to reflect the cellular state of the elesclomol-induced cuproptosis process based on the input and output of the relevant logic relationship. This new fluorescent molecular logic gate probe P0-pH-SO2 can be rapidly activated by mitochondrial sulfites to induce green fluorescence, while the red fluorescence is quenched with the proton in the mitochondria. Overall, this study developed a novel logic-gated molecular probe that provided a versatile strategy for monitoring the role played by intramitochondrial sulfites and H+ in cuproptosis. This work will open the way to broaden the applications of molecular logic gates and fluorescent polysiloxanes.

Recent Progress of Spectroscopic Probes for Peroxynitrite and Their Potential Medical Diagnostic Applications

Peroxynitrite (ONOO-) is a crucial reactive oxygen species that plays a vital role in cellular signal transduction and homeostatic regulation. Determining and visualizing peroxynitrite accurately in biological systems is important for understanding its roles in physiological and pathological activity. Among the various detection methods, fluorescent probe-based spectroscopic detection offers real-time and minimally invasive detection, high sensitivity and selectivity, and easy structural and property modification. This review categorizes fluorescent probes by their fluorophore structures, highlighting their chemical structures, recognition mechanisms, and response behaviors in detail. We hope that this review could help trigger novel ideas for potential medical diagnostic applications of peroxynitrite-related molecular diseases.

Ratiometric orange fluorescent and colorimetric highly sensitive imidazolium-bearing naphthoquinolinedione-based probes for CN- sensing in aqueous solutions and bio-samples

The widespread use of cyanide (CN^-) in industry results in contamination of various effluents such as drain, lake, and tap water, an imminent danger to the environment and human health. We prepared naphthoquinolinedione (cyclized; 1-5) and anthracenedione (un-cyclized) probes (6-7) for selective detection of CN^-. The addition of CN^- to the probe solutions (1-5) resulted in a color change from pale green to orange under 365 nm illumination. The nucleophilic addition of CN^- to C2 of the imidazolium ring of the probes is responsible for selective CN^- detection. Among all probes, 1 gave the lowest fluorescence-based LOD of 0.13 pM. In contrast, the un-cyclized probes (6 and 7) were substantially inferior to the cyclized counterparts (1 and 2, respectively) for detecting a trace amount of CN^-. The notably low LOD displayed by probe 1 was maintained in the detection of CN^- in real food samples, human fluids, and human brain cells. This is the first report studying imidazolium-bearing naphthoquinolinedione-based probes for CN^- sensing in 100% water.

Fluorescent-Tagged Antiscalants-The New Materials for Scale Inhibition Mechanism Studies, Antiscalant Traceability and Antiscaling Efficacy Optimization during CaCO3 and CaSO4·2H2O Scale Formation

Equipment scaling leads to reduced production efficiency in a wide range of industrial applications worldwide. Various antiscaling agents are currently commonly used to mitigate this problem. However, irrespective of their long and successful application in water treatment technologies, little is known about the mechanisms of scale inhibition, particularly the localization of scale inhibitors on scale deposits. The lack of such knowledge is a limiting factor in the development of applications for antiscalants. Meanwhile, fluorescent fragments integrated into scale inhibitor molecules have provided a successful solution to the problem. The focus of this study is, therefore, on the synthesis and investigation of a novel fluorescent antiscalant: (2-(6-morpholino-1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)yl)ethylazanediyl)bis(methylenephosphonic acid) (ADMP-F) which is an analog of the commercial antiscalant: aminotris(methylenephosphonic acid) (ATMP). ADMP-F has been found to effectively control the precipitation of CaCO₃ and CaSO₄ in solution and is a promising tracer for organophosphonate scale inhibitors. ADMP-F was compared with two other fluorescent antiscalants-polyacrylate (PAA-F1) and bisphosphonate (HEDP-F)-and was found to be highly effective: PAA-F1 > ADMP-F >> HEDP-F (CaCO₃) and PAA-F1 > ADMP-F > HEDP-F (CaSO₄·2H₂O). The visualization of the antiscalants on the deposits provides unique information on their location and reveals differences in the "antiscalant-deposit" interactions for scale inhibitors of different natures. For these reasons, a number of important refinements to the mechanisms of scale inhibition are proposed.

Naphthalimide-Piperazine Derivatives as Multifunctional "On" and "Off" Fluorescent Switches for pH, Hg2+ and Cu2+ Ions

Novel 1,8-naphthalimide-based fluorescent probes NI-1 and NI-2 were designed and screened for use as chemosensors for detection of heavy metal ions. Two moieties, methylpyridine (NI-1) and hydroxyphenyl (NI-2), were attached via piperazine at the C-4 position of the napthalimide core resulting in a notable effect on their spectroscopic properties. NI-1 and NI-2 are pH sensitive and show an increase in fluorescence intensity at around 525 nm (switch "on") in the acidic environment, with pK_a values at 4.98 and 2.91, respectively. Amongst heavy metal ions only Cu²⁺ and Hg²⁺ had a significant effect on the spectroscopic properties. The fluorescence of NI-1 is quenched in the presence of either Cu²⁺ or Hg²⁺ which is attributed to the formation of 1:1 metal-ligand complexes with binding constants of 3.6 × 10⁵ and 3.9 × 10⁴, respectively. The NI-1 chemosensor can be used for the quantification of Cu²⁺ ions in sub-micromolar quantities, with a linear range from 250 nM to 4.0 μM and a detection limit of 1.5 × 10^-8 M. The linear range for the determination of Hg²⁺ is from 2 μM to 10 μM, with a detection limit of 8.8 × 10^-8 M. Conversely, NI-2 behaves like a typical photoinduced electron transfer (PET) sensor for Hg²⁺ ions. Here, the formation of a complex with Hg²⁺ (binding constant 8.3 × 10³) turns the green fluorescence of NI-2 into the "on" state. NI-2 showed remarkable selectivity towards Hg²⁺ ions, allowing for determination of Hg²⁺ concentration over a linear range of 1.3 μM to 25 μM and a limit of detection of 4.1 × 10^-7 M.

N-isobutyl-1,8-bis(isobutylamino)-naphthalimide

Naphthalimides make up a class of organic molecules characterised by excellent spectroscopic properties due to their extended conjugate system. Furthermore, various asymmetric or symmetric compounds can be obtained from naphthalimides by the different functionalization that can be performed on the nitrogen and/or on the aromatic rings. The introduction of a wide range of substituents in different positions allows chemical and spectroscopic properties to be regulated. In this contribution, we report the synthesis and characterization of a new 4,5-amino-1,8-naphthalimide bearing three isobutyl substituents.

A Highly Water-Soluble and Solid State Emissive 1,8-Naphthalimide as a Fluorescent PET Probe for Determination of pHs, Acid/Base Vapors, and Water Content in Organic Solvents

A new highly water-soluble 1,8-naphthalimide fluorophore designed on the “fluorophore-spacer-receptor1-receptor2” model has been synthesized. Due to the unusually high solubility in water, the novel compound proved to be a selective PET-based probe for the determination of pHs in aqueous solutions and rapid detection of water content in organic solvents. Based on the pH dependence of the probe and its high water solubility, the INH logic gate was achieved using NaOH and water as chemical inputs, where NaOH is the disabler and the water is an enabler. In addition, the probe showed effective fluorescence “off-on” reversibility on glass support after exposure to acid and base vapors, which defines it as a promising platform for rapid detection of acid/base vapors in the solid-state, thus extending the molecular sensing concept from solution to the solid support.

Acid responsiveness of emissive morpholinyl aminoquinolines and their use for cell fluorescence imaging

Herein, we report emissive aminoquinoline derivatives (TFMAQ) containing alkylmorpholine and arylmorpholine groups and their photophysical properties, acid-responsiveness, and organelle targeting. The alkylmorpholine group is well-known to favour accumulation in lysosomes and be acid-responsive, but, counterintuitively, the TFMAQ derivatives containing ethylmorpholine groups showed limited accumulation in lysosomes and, instead, preferential accumulation in lipid droplets. The findings reported here will aid the development of organelle/tissue specific dyes for cell imaging and diagnosis.