Portable sensitive and selective biosensing assay of dopamine in live cells using dual phosphorus and nitrogen doped carbon urchin-like structure

Urchin-like CoP3/Cu3P heterostructured nanorods supported on a 3D porous copper foam for high-performance non-enzymatic electrochemical dopamine sensors

In this study, we developed a high-performance non-enzymatic electrochemical sensor based on urchin-like CoP3/Cu3P heterostructured nanorods supported on a three-dimensional porous copper foam, namely, CoP3/Cu3P NRs/CF, for the detection of dopamine. Benefiting from the promising intrinsic catalytic activities of CoP3 and Cu3P, urchin-like microsphere structures, and a large electrochemically active surface area for exposing numerous accessible catalytic active sites, the proposed CoP3/Cu3P NRs/CF shows extraordinary electrochemical response towards the electrocatalytic oxidation of dopamine. As a result, the CoP3/Cu3P NRs/CF sensing electrode has a broad detection window (from 0.2 to 2000 μM), low detection limit (0.51 μM), high electrochemical sensitivity (0.0105 mA μM-1 cm-2), excellent selectivity towards dopamine in the coexistence of some interfering species, and good stability for dopamine determination. More importantly, the CoP3/Cu3P NRs/CF catalyst also exhibits excellent catalytic activity, sensitivity, and selectivity for dopamine detection under simulated human body conditions at a physiological pH of 7.25 (0.1 M PBS) at 36.6 °C.

Comparative study between three carbonaceous nanoblades and nanodarts for antimicrobial applications

The design of nanostructured materials occupies a privileged position in the development and management of affordable and effective technology in the antibacterial sector. Here, we discuss the antimicrobial properties of three carbonaceous nanoblades and nanodarts materials of graphene oxide (GO), reduced graphene oxide (RGO), and single-wall carbon nanotubes (SWCNTs) that have a mechano-bactericidal effect, and the ability to piercing or slicing bacterial membranes. To demonstrate the significance of size, morphology and composition on the antibacterial activity mechanism, the designed nanomaterials have been characterized. The minimum inhibitory concentration (MIC), standard agar well diffusion, and transmission electron microscopy were utilized to evaluate the antibacterial activity of GO, RGO, and SWCNTs. Based on the evidence obtained, the three carbonaceous materials exhibit activity against all microbial strains tested by completely encapsulating bacterial cells and causing morphological disruption by degrading the microbial cell membrane in the order of RGO > GO > SWCNTs. Because of the external cell wall structure and outer membrane proteins, the synthesized carbonaceous nanomaterials exhibited higher antibacterial activity against Gram-positive bacterial strains than Gram-negative and fungal microorganisms. RGO had the lowest MIC values (0.062, 0.125, and 0.25 mg/mL against B. subtilis, S. aureus, and E. coli, respectively), as well as minimum fungal concentrations (0.5 mg/mL for both A. fumigatus and C. albicans). At 12 hr, the cell viability values against tested microbial strains were completely suppressed. Cell lysis and death occurred as a result of severe membrane damage caused by microorganisms perched on RGO nanoblades. Our work gives an insight into the design of effective graphene-based antimicrobial materials for water treatment and remediation.

Ratiometric fluorescence sensor based on europium-organic frameworks for selective and quantitative detection of cerium ions

BACKGROUND

Due to the unavoidable use of cerium in daily life, the accumulation of cerium in the environment increases health risks for humans. Therefore, it is crucial to develop a chemical sensing technology for the rapid, sensitive, and selective detection of cerium ions.

RESULTS

In this research work, a novel two-dimensional chain structure of a europium-based metal organic framework (Eu-MOF) [Eu2(tcpa)(Htcpa)2] was synthesized by using 3,4,5,6-tetrachloro-1,2-benzenedicarboxylic acid (H2TCPA) as the ligand and europium nitrate as the metal source. The results of powder X-ray diffraction and thermogravimetric analysis show that the synthesized Eu-MOF has excellent chemical and thermal stability. When the Eu-MOF suspension was excited by ultraviolet light at 292 nm, four fluorescence emissions were observed at 420, 595, 620 and 705 nm. It was particularly interesting that when cerium ions (Ce3+/Ce4+) were added to the Eu-MOF suspension, the fluorescence intensity at 420 nm was enhanced, while the fluorescence at 620 nm was quenched. On this basis, a ratiometric fluorescent sensor for detecting cerium ions was constructed, which has a good linear relationship in the range of 0.05-15 μM and a detection limit of 16 nM. The plausible mechanism of the change in the fluorescence characteristics of Eu-MOF caused by cerium ions was discussed in detail. Through the study of fluorescence lifetime and ultraviolet absorption, it was proven that the mechanism of Ce3+-quenching Eu-MOF fluorescence is the inner filter effect. Photoinduced electron transfer and internal filtering effects lead to fluorescence quenching at 620 nm, while redox reactions lead to fluorescence enhancement of the ligand at 420 nm.

SIGNIFICANCE

The proposed ratiometric fluorescence sensor was successfully employed for the detection of cerium ions in real water samples, confirming that it can be used as an alternative method for the detection of Ce3+ and Ce4+ in environmental samples.

Lithography-free interdigitated electrodes by trench-filling patterning on polymer substrate for Alzheimer's disease detection

Microelectrodes have played a crucial role in electrochemistry for the last few decades. However, the conventional lithographic processes, the key players in fabrication, are nonetheless technologically challenging, pricey, and lack reproducibility. In this work has developed a novel and low-cost patterned-replication fabrication technology for interdigitated electrode array (IDA) electrodes on the polymer substrate. Conventional UV-lithography has been utilized to fabricate the nickel IDA electrode pattern as a master mold on the stainless-steel substrate, which was replicated onto the polymer substrate by the hot-emboss technique. Then, gold was deposited on the replicated wafer by electron beam evaporation, and finally adhesive tape lift-off was used to obtain the gold IDA electrode. The fabricated IDA electrode was applied for electrochemical detection of various p-aminophenol (PAP) concentrations as a representative biomarker with a detection limit of 0.01 nM. Finally, different levels of amyloid beta 42 (Aß42) and amyloid beta aggregated (Aß Agg.), two Alzheimer's disease (AD) biomarkers, were measured using the developed IDA electrode via e-ELISA using enzyme by-products PAP. While quantified, the proposed IDA electrode successfully detects Aß42 and Aß Agg. with the lower detection limit (LOD) of 3.9 and 7.81 pg/ml, respectively.

Detection of gallic acid in food using an ultra-sensitive electrochemical sensor based on glass carbon electrode modified by bimetal doped carbon nanopolyhedras

Gallic acid is widely used as an antioxidant in food because of its good antioxidant function, but excessive intake induces side effects in humans, so it is essential to devise a highly responsive technique for detecting gallic acid. In this work, we synthesized ZIF-67@FePc by the one-pot method. The synthesized material is more stable at high temperatures compared to ZIF-67 and maintains its original morphology during pyrolysis, when iron was introduced as a second metal active site during the synthesis process. Subsequently, Co/FeOX@NC-800 was employed to fabricate a GA sensor on a GCE. The developed sensor exhibited remarkable sensitivity towards GA, featuring a low LOD of 1.30 nM and a linear range spanning from 5 to 4500 nM. The electrochemical sensors we have prepared also showed good selectivity, stability, and reproducibility. It has been successfully employed for detecting GA in actual samples such as apples, grapes, tomatoes, and red wine.

An ultrasensitive dietary caffeic acid electrochemical sensor based on Pd-Ru bimetal catalyst doped nano sponge-like carbon

Caffeic acid (CA) is widely present in the human daily diet, and a reliable CA detection method is beneficial to food safety. Herein, we constructed a CA electrochemical sensor employing a glassy carbon electrode (GCE) which was modified by the bimetallic Pd-Ru nanoparticles decorated N-doped spongy porous carbon obtained by pyrolysis of the energetic metal-organic framework (MET). The high-energy bond N-NN in MET explodes to form N-doped sponge-like carbon materials (N-SCs) with porous structures, boosting the adsorptive capacity for CA. The addition of Pd-Ru bimetal improves the electrochemical sensitivity. The linear range of the PdRu/N-SCs/GCE sensor is 1 nM-100 nM and 100 nM-15 μM, with a low detection limit (LOD) of 0.19 nM. It has a high sensitivity (55 μA/μM) and repeatability. The PdRu/N-SCs/GCE sensor has been used to detect CA in actual samples of red wine, strawberries, and blueberries, providing a novel approach for CA detection in food analysis.

Highly Sensitive and Selective Dopamine Determination in Real Samples Using Au Nanoparticles Decorated Marimo-like Graphene Microbead-Based Electrochemical Sensors

A sensitive and selective electrochemical dopamine (DA) sensor has been developed using gold nanoparticles decorated marimo-like graphene (Au NP/MG) as a modifier of the glassy carbon electrode (GCE). Marimo-like graphene (MG) was prepared by partial exfoliation on the mesocarbon microbeads (MCMB) through molten KOH intercalation. Characterization via transmission electron microscopy confirmed that the surface of MG is composed of multi-layer graphene nanowalls. The graphene nanowalls structure of MG provided abundant surface area and electroactive sites. Electrochemical properties of Au NP/MG/GCE electrode were investigated by cyclic voltammetry and differential pulse voltammetry techniques. The electrode exhibited high electrochemical activity towards DA oxidation. The oxidation peak current increased linearly in proportion to the DA concentration in a range from 0.02 to 10 μM with a detection limit of 0.016 μM. The detection selectivity was carried out with the presence of 20 μM uric acid in goat serum real samples. This study demonstrated a promising method to fabricate DA sensor-based on MCMB derivatives as electrochemical modifiers.

Using 3D printed magnetic platform as support for screen printed electrode applied for p-toluenediamine detection in biological fluid and water samples

The present work reports the development and application of a new electrochemical sensor for the determination of low concentration levels of p-toluenediamine (PTD) in biological fluids and surface water samples. The proposed sensor was developed using a 3D-printed magnetic device as platform for carbon screen printed electrode (CSPE) modified by magnetic nanoparticles functionalized with carboxylic groups and l-cysteine (MNP-CA-CYS). The results obtained from the morphological and electrochemical characterizations of the sensing platform enabled us to confirm the success of the sensor functionalization with l-cysteine and to have a better understanding of the electrochemical behavior and preconcentration of PTD on the electrode surface. PTD oxidation occurred at 0.24V on MNP-CA-CYS and the mechanism recorded an increase of 51.0% in anodic peak current. Under optimized conditions, the square wave voltammograms obtained for the electrode modified by 40.0 μL MNP-CA-CYS suspension at 1.0 mg mL^-1, with accumulation time of 3 min, presented an analytical curve with linear range of 8.00 × 10^-7 to 8.00 × 10^-5 mol L^-1, represented by the equation Iap = (0.383 ± 0.011)[PTD] - (8.112 ± 0.07) × 10^-8 (R² = 0.9994), and detection and quantification limits of 8.53 × 10^-8 and 2.56 × 10^-7 mol L^-1, respectively. Finally, the proposed method was validated through comparison with high performance liquid chromatography coupled to diode array detector (HPLC-DAD) technique and was successfully applied for PTD determination in samples of surface water, tap water, fetal bovine serum and artificial urine.

Nitrogen-Doped Carbon Quantum Dots for Biosensing Applications: The Effect of the Thermal Treatments on Electrochemical and Optical Properties

The knowledge of the ways in which post-synthesis treatments may influence the properties of carbon quantum dots (CDs) is of paramount importance for their employment in biosensors. It enables the definition of the mechanism of sensing, which is essential for the application of the suited design strategy of the device. In the present work, we studied the ways in which post-synthesis thermal treatments influence the optical and electrochemical properties of Nitrogen-doped CDs (N-CDs). Blue-emitting, N-CDs for application in biosensors were synthesized through the hydrothermal route, starting from citric acid and urea as bio-synthesizable and low-cost precursors. The CDs samples were thermally post-treated and then characterized through a combination of spectroscopic, structural, and electrochemical techniques. We observed that the post-synthesis thermal treatments show an oxidative effect on CDs graphitic N-atoms. They cause their partially oxidation with the formation of mixed valence state systems, [CDs]⁰⁺, which could be further oxidized into the graphitic N-oxide forms. We also observed that thermal treatments cause the decomposition of the CDs external ammonium ions into ammonia and protons, which protonate their pyridinic N-atoms. Photoluminescence (PL) emission is quenched.

Low-Temperature, Efficient Synthesis of Highly Crystalline Urchin-like Tantalum Diboride Nanoflowers

Urchin-like tantalum diboride (TaB2) nanoflowers were successfully synthesized via a high-efficiency and energy-saving methodology, molten-salt and microwave co-modified boro/carbothermal reduction, using less expensive B4C as a reducing agent. By taking advantage of the synergistic effects of the molten-salt medium and microwave heating conditions, the onset formation temperature of TaB2 was drastically reduced to below 1000 °C, and phase-pure powders of TaB2 nanoflowers were obtained at temperatures as low as 1200 °C within only 20 min. Notably, the present temperature conditions were remarkably milder than those (>1500 °C for several hours) required by conventional reduction methods, which use the strong, but expensive, reducing agent, elemental boron. The resulting urchin-like TaB2 nanoflowers consisted of numerous uniform single-crystalline nanowires with lengths up to 4.16 μm, and high aspect ratios >10. This result indicated that the as-synthesized urchin-like TaB2 nanoflowers possessed high specific surface area and anisotropic morphology, which were favorable not only for sintering, but also for toughening their bulk counterparts.