A review of recent advancements in pretreatment techniques of lignocellulosic materials for biogas production: Opportunities and Limitations

Surface modification of cellulose nanocrystals for biomedical and personal hygiene applications

The increasing demand for sustainable and effective materials in biomedical and personal hygiene applications has driven the exploration of cellulose nanocrystals (CNCs) derived from biomass. These nanomaterials are highly valued for their exceptional mechanical properties, biocompatibility, and renewable nature. Researchers are exploring CNCs for advancing medical and hygiene products, but surface modification is often needed to maximize their benefits. Techniques such as chemical functionalization, physical coating, and hybridization can significantly enhance CNCs dispersibility, stability, and interaction with biological systems. This versatility makes CNCs suitable for a variety of applications, including drug delivery systems, wound dressings, and personal hygiene products. Despite their advantages, maintaining the inherent properties of CNCs while integrating new functionalities through modification poses a challenge. Understanding the impact of various modification techniques on CNC performance is crucial for optimizing their effectiveness. This review aimed to consolidate current knowledge on the surface modification of biomass-derived CNCs, offering insights into different methods and their implications for biomedical and personal hygiene applications. By highlighting advancements, challenges, and prospects, it served as a crucial resource for advancing the development and application of CNCs in these critical fields.

Innovative Strategies for Upcycling Agricultural Residues and Their Various Pharmaceutical Applications

This review investigates innovative strategies for upcycling agricultural residues into valuable pharmaceutical compounds. The improper disposal of agricultural residues contributes to significant environmental issues, including increased greenhouse gas emissions and ecosystem degradation. Upcycling offers a sustainable solution, transforming these residues into high-value bioproducts (antioxidants, antitumor agents, antidiabetic compounds, anti-inflammatory agents, and antiviral drugs). Nanotechnology and microbial biotechnology have a crucial role in enhancing bioavailability and targeted delivery of bioactive compounds. Advanced techniques like enzymatic hydrolysis, green solvents, microwave processing, pyrolysis, ultrasonic processing, acid and alkaline hydrolysis, ozonolysis, and organosolv processes are explored for their effectiveness in breaking down agricultural waste and extracting valuable compounds. Despite the promising potential, challenges such as variability in residue composition, scalability, and high costs persist. The review emphasizes the need for future research on cost-effective extraction techniques and robust regulatory frameworks to ensure the safety, efficacy, and quality of bioproducts. The upcycling of agricultural residues represents a viable path towards sustainable waste management and production of pharmaceutical compounds, contributing to environmental conservation and public health improvements. This review provides an analysis of the current literature and identifies knowledge gaps, offering recommendations for future studies to optimize the use of agricultural residues in the drug industry.

Optimizing alkali-pretreatment dosage for waste-activated sludge disintegration and enhanced biogas production yield

The rapid transition towards modernization and industrialization led to an increase in urban population, resulting in paramount challenge to municipal sewage sludge management. Anaerobic digestion (AD) serves as a promising venue for energy recovery from waste-activated sludge (WAS). Addressing the challenge of breaking down floc structures and microbial cells is crucial for releasing extracellular polymeric substances and cytoplasmic macromolecules to facilitate hydrolysis and fermentation process. The present study aims to introduce a combined process of alkaline/acid pre-treatments and AD to enhance sludge digestion and biogas production. The study investigates the influence of alkali pretreatment at ambient temperature using four alkali reagents (NaOH, Ca(OH)2, Mg(OH)2, and KOH). The primary goal is to provide insights into the intricate interplay of alkali dosages (0.04-0.12 g/gTS) on key physic-chemical parameters crucial for optimizing the pre-treatment dosage. Under the optimized alkaline/acid pre-treatment condition, the TSS reduction of 18%-30% was achieved. An increase in sCOD concentration (24%-50%) signifies the enhanced hydrolysis and solubilization rate of organic substrate in WAS. Finally, the biomethane potential test (BMPT) was performed for pre-treated WAS samples. The maximum methane (CH4) yield was observed in combination A1 (244 mL/g) and D1 (253 mL/g), demonstrating the pivotal role of alkali optimization in enhancing AD efficiency. This study serves as a valuable resource to policymakers, researchers, and technocrats in addressing challenges associated to sludge management.

Effect of hydrothermal-acid pretreatment on methane yield and microbial community in anaerobic digestion of rice straw

Hydrothermal pretreatment has been proposed to enhance straw methane yield during anaerobic digestion recently. However, the combined effect of hydrothermal and organic acid pretreatment (HTOAP) needs further investigation. This study identified optimal pretreatment at 120 °C with 3 % acetic acid for 24 h by orthogonal design method. The HTOAP increased the reducing sugar content by destroying the lignocellulosic structure. A 79 % increment of methane production after HTOAP was observed compared to the untreated group. Microbial analysis showed that HTOAP enriched the relative abundance of lignocellulose-degraders, such as W5053, Thermanaerovibrio, Caldicoprobacter, as well as the syntrophic acetate oxidizing bacteria Syntrophaceticus. Moreover, Methanobacterium conducted hydrogenotrophic methanogenesis dominantly. Furthermore, the potential function analysis showed that HTOAP stimulated the expression of key enzymes in the hydrogenotrophic pathway, including carbon-monoxide dehydrogenase (EC 1.2.7.4) and coenzyme F420 hydrogenase (EC 1.12.98.1). This investigation illustrated the potential of HTOAP of rice straw to facilitate methane production.

Lignocellulosic materials valorization in second generation biorefineries: an opportunity to produce fungal biopigments

Second generation biorefineries play an important role in the production of renewable energy and fuels, utilizing forest and agro-industrial residues and by-products as raw materials. The integration of novel bioproducts, such as: xylitol, β-carotene, xylooligosaccharides, and biopigments into the biorefinery's portfolio can offer economic benefits in the valorization of lignocellulosic materials, particularly cellulosic and hemicellulosic fractions. Fungal biopigments, known for their additional antioxidant and antimicrobial properties, are appealing to consumers and can have applications in various industrial sectors, including food and pharmaceuticals. The use of lignocellulosic materials as carbon and nutrient sources for the growth medium helps to reduce production costs, increasing the competitiveness of fungal biopigments in the market. In addition, the implementation of biopigment production in biorefineries allows the utilization of underutilized fractions, such as hemicellulose, for value-added bioproducts. This study deals with the potential of fungal biopigments production in second generation biorefineries in order to diversify the produced biomolecules together with energy generation. A comprehensive and critical review of the recent literature on this topic has been conducted, covering the major possible raw materials, general aspects of second generation biorefineries, the fungal biopigments and their potential for incorporation into biorefineries.

A comprehensive review on anaerobic digestion with focus on potential feedstocks, limitations associated and recent advances for biogas production

With the escalating energy demand to accommodate the growing population and its needs along with the responsibility to mitigate climate change and its consequences, anaerobic digestion (AD) has become the potential approach to sustainably fulfil our demands and tackle environmental issues. Notably, a lot of attention has been drawn in recent years towards the production of biogas around the world in waste-to-energy perspective. Nevertheless, the progress of AD is hindered by several factors such as operating parameters, designing and the performance of AD reactors. Furthermore, the full potential of this approach is not fully realised yet due the dependence on people's acceptance and government policies. This article focuses on the different types of feedstocks and their biogas production potential. The feedstock selection is the basic and most important step for accessing the biogas yield. Furthermore, different stages of the AD process, design and the configuration of the biogas digester/reactors have been discussed to get better insight into process. The important aspect to talk about this process is its limitations associated which have been focused upon in detail. Biogas is considered to attain the sustainable development goals (SDG) proposed by United Nations. Therefore, the huge focus should be drawn towards its improvements to counter the limitation and makes it available to all the rural communities in developing countries and set-up the pilot scale AD plants in both developing and developed countries. In this regard, this article talks about the improvements and futures perspective related to the AD process and biogas enhancement.

Exploring nature's filters: Peat-mineral mix for low and high-strength oilfield produced water reclamation

Nature-based solutions are encouraged for treating oilfield produced water from oil and gas extraction, a crucial undertaking that aligns with the Canadian oil sands industry's ambitious goal of zero waste, and the globally recognized Sustainable Development Goals (SDGs) pertaining to water conservation and ecosystem preservation. This study explored the use of peat-mineral mix (PMM), a leftover of inevitable oil sands mining, for treating low and high-strength wastewaters during biofiltration, which contained large molecular weight (44.3 kDa), which include alcohols, aliphatics, aromatics, and ketones, and can impart high toxicity to both fauna and flora (MicroTox: 99 %). The breakthrough curve indicated an effective initial adsorption phase driven by advection within the column dynamics. For complete organics removal and mechanistic insights, the wastewater was re-circulated in a continuous mode for up to 42 days. Here, we found that chemical oxygen demand was reduced from ∼85,000 mg/L to ∼965 mg/L). Kinetics investigations along with physicochemical characterization of PMM and wastewater suggested that chemisorption and anaerobic digestion contributed to the overall removal of contaminants. Chemisorption, led by hydrogen bonding and hydrophobic interactions, was the dominant mechanism, with a limited contribution from physical adsorption (surface area: 2.85 m2/g). The microbial community within the PMM bed was rich/diverse (Shannon > 6.0; Chao1 > 600), with ∼ 50 % unclassified phylotypes representing 'microbial dark matter'. High electric conductivity (332.1 μS cm-1) of PMM and the presence of Geobacter, syntrophs, and Methanosaeta suggest that direct interspecies electron transfer was likely occurring during anaerobic digestion. Both low and high-strength wastewaters showed effective removal of dissolved organics (e.g., naphthenic acids, acid extractable fraction, oil and grease content), nutrients, and potentially toxic metals. The successful use of PMM in treating oilfield produced water offers promising avenues for embracing nature-based remediation solutions at oil refining sites.

Green chemical and hybrid enzymatic pretreatments for lignocellulosic biorefineries: Mechanism and challenges

The greener chemical and enzymatic pretreatments for lignocellulosic biomasses are portraying a crucial role owing to their recalcitrant nature. Traditional pretreatments lead to partial degradation of lignin and hemicellulose moieties from the pretreated biomass. But it still restricts the enzyme accessibility for the digestibility towards the celluloses and the interaction of lignin-enzymes, nonproductively. Moreover, incursion of certain special chemical treatments and other lignin sulfonation techniques to the enzymatic pretreatment (hybrid enzymatic pretreatment) enhances the lignin structural modification, solubilization of the hemicelluloses and both saccharification and fermentation processes (SAF). This article concentrates on recent developments in various chemical and hybrid enzymatic pretreatments on biomass materials with their mode of activities. Furthermore, the issues on strategies of the existing pretreatments towards their industrial applications are highlighted, which could lead to innovative ideas to overcome the challenges and give guideline for the researchers towards the lignocellulosic biorefineries.

Algae biogas production focusing on operating conditions and conversion mechanisms - A review

Global warming is the result of traditional fuel use and manufacturing, which release significant volumes of CO₂ and other greenhouse gases from factories. Moreover, rising energy consumption, anticipated limitations of fossil fuels in the near future, and increased interest in renewable energies among scientists, currently increase research in biofuels. In contrast to biomass from urban waste materials or the land, algae have the potential to be a commercially successful aquatic energy crop, offering a greater energy potential. Here we discuss the importance of Anaerobic Digestion (AD) for enhanced biogas yield, characterization, and comparisons between algae pretreatment methods namely, mechanical, thermal, microwave irradiation, and enzymatic and catalytic methods. The importance of anaerobic digestion enhances biogas yield, characterization, and comparisons between mechanical, thermal, microwave irradiation, and enzymatic and catalytic treatment. Additionally, operational aspects such as algal species, temperature, C/N ratio, retention period, and particle size impact biofuel yield. The highest algal biogas yield reported was 740 mL/gVS, subtracted from Taihu de-oiled algae applying thermos-chemical pretreatment under conditions of temperature, time, and catalyst concentration of 70 °C, 3 h, and 6%, respectively. Another high yield of algal-based biogas was obtained from Laminaria sp. with mechanical pretreatment under temperature, time, and VS concentration of 38 ± 1 °C, 15 min, and 2.5% respectively, with a maximum yield of 615 ± 7 mL/g VS. Although biofuels derived from algae species are only partially commercialized, the feedstock for biogas might soon be commercially grown. Algae and other plant species that could be cultivated on marginal lands as affordable energy crops with the potential to contribute to the production of biogas are promising and are already being worked on.

Development of lignocellulosic biorefineries for the sustainable production of biofuels: Towards circular bioeconomy

The idea of environment friendly and affordable renewable energy resources has prompted the industry to focus on the set up of biorefineries for sustainable bioeconomy. Lignocellulosic biomass (LCB) is considered as an abundantly available renewable feedstock for the production of biofuels which can potentially reduce the dependence on petrochemical refineries. By utilizing various conversion technologies, an integrated biorefinery platform of LCB can be created, embracing the idea of the 'circular bioeconomy'. The development of effective pretreatment methods and biocatalytic systems by various bioengineering and machine learning approaches could reduce the bioprocessing costs, thereby making biomass-based biorefinery more sustainable. This review summarizes the development and advances in the lignocellulosic biorefineries from the LCB to the final product stage using various different state-of-the-art approaches for the progress of circular bioeconomy. The life cycle assessment which generates knowledge on the environmental impacts related to biofuel production chains is also summarized.

Microbial insights towards understanding the role of hydrochar in enhancing phenol degradation in anaerobic digestion

Anaerobic digestion (AD) of wastewater is the most promising bioprocess for organic conversion, however, phenol is toxic and resistant to anaerobic degradation. The current study compared the effect of hydrochar and granular activated carbon (GAC) on AD of phenol at four concentrations (100 mg/L, 250 mg/L, 500 mg/L and 1000 mg/L). Results demonstrated that hydrochar significantly improved the methane production rate and reduced the lag phase at all concentrations of phenol. The methane production rate was improved by about 50% at both 100 mg/L and 250 mg/L phenol, while it was raised by >160% at 500 mg/L and 1000 mg/L phenol by hydrochar. The GAC only increased the methane production rate at 500 mg/L and 1000 mg/L due to high adsorption capacity. Further, the adsorption of phenol by hydrochar had no apparent impact on the methane production rate, even though certain amounts of phenol were adsorbed. At 500 mg/L, the amount of methane produced significantly increased, so 16S rRNA transcripts sequencing and metabolomic analysis were conducted. 16S rRNA transcripts sequencing analysis indicated that hydrochar resulted in the enrichment of syntrophic bacteria (e.g., Syntrophorhabdus &Syntrophobacter) and Methanosaeta, which might be related with direct interspecies electron transfer. Further, it was noticed that the growth of Methanobacterium was repressed at 500 mg/L phenol, while hydrochar promoted its growth. Phenol was degraded into L-tyrosine and then followed the benzoate degradation pathway for methane production as revealed by metabolomic analysis. In addition, metabolomic analysis also revealed that hydrochar promoted the degradation of all metabolites and enhanced the phenol degradation into methane.

Non-conventional yeast strains: Unexploited resources for effective commercialization of second generation bioethanol

The conventional yeast (Saccharomyces cerevisiae) is the most studied yeast and has been used in many important industrial productions, especially in bioethanol production from first generation feedstock (sugar and starchy biomass). However, for reduced cost and to avoid competition with food, second generation bioethanol, which is produced from lignocellulosic feedstock, is now being investigated. Production of second generation bioethanol involves pre-treatment and hydrolysis of lignocellulosic biomass to sugar monomers containing, amongst others, d-glucose and D-xylose. Intrinsically, S. cerevisiae strains lack the ability to ferment pentose sugars and genetic engineering of S. cerevisiae to inculcate the ability to ferment pentose sugars is ongoing to develop recombinant strains with the required stability and robustness for commercial second generation bioethanol production. Furthermore, pre-treatment of these lignocellulosic wastes leads to the release of inhibitory compounds which adversely affect the growth and fermentation by S. cerevisae. S. cerevisiae also lacks the ability to grow at high temperatures which favour Simultaneous Saccharification and Fermentation of substrates to bioethanol. There is, therefore, a need for robust yeast species which can co-ferment hexose and pentose sugars and can tolerate high temperatures and the inhibitory substances produced during pre-treatment and hydrolysis of lignocellulosic materials. Non-conventional yeast strains are potential solutions to these problems due to their abilities to ferment both hexose and pentose sugars, and tolerate high temperature and stress conditions encountered during ethanol production from lignocellulosic hydrolysate. This review highlights the limitations of the conventional yeast species and the potentials of non-conventional yeast strains in commercialization of second generation bioethanol.

Lignocellulosic biomass conversion via greener pretreatment methods towards biorefinery applications

Lignocellulose biomass during pretreatment releases various compounds, among them the most important is reducing sugars, which can be utilized for the production of biofuels and some other products. Thereby, innovative greener pretreatment techniques for lignocellulosic materials have been considered to open a new door in the aspects of digestibility of the rigid carbohydrate-lignin matrix to reduce the particle size and remove hemicellulose/lignin contents to successfully yield valid bioproducts. This article reviews about the composition of lignocelluloses and emphasizes various green pretreatments viz novel green solvent-based IL and DES steam explosion, supercritical carbon dioxide explosion (Sc-CO2) and co-solvent enhanced lignocellulosic fractionation (CELF) along with suitable mechanistic pathway of LCB pretreatment process. Finally, this article concludes that the existing pretreatments should be redesigned to conquer the demands by large scale production and suggests combined pretreatment methods to carry out various biomass pre-processing.

Transformation of Agro-Waste into Value-Added Bioproducts and Bioactive Compounds: Micro/Nano Formulations and Application in the Agri-Food-Pharma Sector

The agricultural sector generates a significant amount of waste, the majority of which is not productively used and is becoming a danger to both world health and the environment. Because of the promising relevance of agro-residues in the agri-food-pharma sectors, various bioproducts and novel biologically active molecules are produced through valorization techniques. Valorization of agro-wastes involves physical, chemical, and biological, including green, pretreatment methods. Bioactives and bioproducts development from agro-wastes has been widely researched in recent years. Nanocapsules are now used to increase the efficacy of bioactive molecules in food applications. This review addresses various agri-waste valorization methods, value-added bioproducts, the recovery of bioactive compounds, and their uses. Moreover, it also covers the present status of bioactive micro- and nanoencapsulation strategies and their applications.

Effect of Alkaline and Mechanical Pretreatment of Wheat Straw on Enrichment Cultures from Pachnoda marginata Larva Gut

In order to partially mimic the efficient lignocellulose pretreatment process performed naturally in the gut system of Pachnoda marginata larvae, two wheat straw pretreatments were evaluated: a mechanical pretreatment via cutting the straw into two different sizes and an alkaline pretreatment with calcium hydroxide. After pretreatment, gut enrichment cultures on wheat straw at alkaline pH were inoculated and kept at mesophilic conditions over 45 days. The methanogenic community was composed mainly of the Methanomicrobiaceae and Methanosarcinaceae families. The combined pretreatment, size reduction and alkaline pretreatment, was the best condition for methane production. The positive effect of the straw pretreatment was higher in the midgut cultures, increasing the methane production by 192%, while for hindgut cultures the methane production increased only by 149% when compared to non-pretreated straw. Scanning electron microscopy (SEM) showed that the alkaline pretreatment modified the surface of the wheat straw fibers, which promoted biofilm formation and microbial growth. The enrichment cultures derived from larva gut microbiome were able to degrade larger 1 mm alkaline treated and smaller 250 µm but non-pretreated straw at the same efficiency. The combination of mechanical and alkaline pretreatments resulted in increased, yet not superimposed, methane yield.

Agro waste as a potential carbon feedstock for poly-3-hydroxy alkanoates production: Commercialization potential and technical hurdles

The enormous production and widespread applications of non -biodegradable plastics lead to their accumulation and toxicity to animals and humans. The issue can be addressed by the development of eco-friendly strategies for the production of biopolymers by utilization of waste residues like agro residues. This will address two societal issues - waste management and the development of an eco-friendly biopolymer, poly-3-hydroxy alkanoates (PHAs). Strategies adopted for utilization of agro-residues, challenges and future perspectives are discussed in detail in this comprehensive review. The possibility of PHA properties improvements can be increased by preparation of blends.

Lignocellulose biohydrogen towards net zero emission: A review on recent developments

This review mainly determines novel and advance physical, chemical, physico-chemical, microbiological and nanotechnology-based pretreatment techniques in lignocellulosic biomass pretreatment for bio-H2 production. Further, aim of this review is to gain the knowledge on the lignocellulosic biomass pretreatment and its priority on the efficacy of bio-H2 and positive findings. The influence of various pretreatment techniques on the structure of lignocellulosic biomass have presented with the pros and cons, especially about the cellulose digestibility and the interference by generation of inhibitory compounds in the bio-enzymatic technique as such compounds is toxic. The result implies that the stepwise pretreatment technique only can ensure eventually the lignocellulosic biomass materials fermentation to yield bio-H2. Though, the mentioned pretreatment steps are still a challenge to procure cost-effective large-scale conversion of lignocellulosic biomass into fermentable sugars along with low inhibitory concentration.

Improved production of biogas via microbial digestion of pressmud using CuO/Cu2O based nanocatalyst prepared from pressmud and sugarcane bagasse waste

Biogas production through anaerobic digestions of organic wastes using microbes is a potential alternative to maintain the long term sustainability of the environment and also to full-fill the energy demands and waste management issues. In this context, pressmud can be a vital substrate which is generated from sugarcane industries and found to be broadly available. In this work, biogas improvement has been investigated in presence of CuO/Cu₂O based nanocatalyst wherein pressmud is employed as a substrate in anaerobic digestion. Herein, CuO/Cu₂O based nanocatalyst has been prepared using the aqueous extract prepared from the combination of PM and SCB which is employed as a reducing agent. The physicochemical properties of CuO/Cu₂O nanocatalyst have been probed through different techniques and it is noticed that using 1.0 % CuO/Cu₂O based nanocatalyst employed in AD process, cumulative biogas 224.7 mL CH₄ /g VS could be recorded after 42 days.

Semi-continuous mesophilic-thermophilic two-phase anaerobic co-digestion of food waste and spent mushroom substance: Methanogenic performance, microbial, and metagenomic analysis

The methanogenic efficiency and system stability of anaerobic co-digestion of food waste (FW) and spent mushroom substance (SMS) are important for its application. A 90-day semi-continuous study was conducted to compare the co-digestion performance of an ethanologenic-methanogenic two-phase system and an acidogenic-methanogenic system using FW and SMS as substrates. The results showed that the ethanologenic-methanogenic system increased the contents of ethanol and acetate in the hydrolytic acidification phase. Microbial-community analysis showed that ethanologenic-methanogenic system enriched hydrolytic acidifying bacteria and methanogens such as Methanoculleus, resulting in an increase in the average methane yield of methanogenic phase by 1.91-2.43 times at the same organic loading rate (OLR = 3.0-4.0 g-VS·L^-1·d^-1). Metagenomic analysis indicated that the ethanologenic-methanogenic system increased the abundance of enzyme-encoding genes and promoted the degradation of acetate and CO₂/H₂, thereby enhancing methanogenic metabolic pathways, compared to the acidogenic-methanogenic system.

Current challenges of hydrothermal treated wastewater (HTWW) for environmental applications and their perspectives: A review

Hydrothermal treatment (HT) is an emerged thermochemical approach for the utilization of biomass. In the last decade, intense research has been conducted on bio-oil and hydrochar, during which extensive amount of hydrothermal treated wastewater (HTWW) is produced, containing large amount of organic compounds along with several toxic chemicals. The composition of HTWW is highly dependent on the process conditions and organic composition of biomass, which determines its further utilization. The current study provides a comprehensive overview of recent advancements in HTWW utilization and its properties which can be changed by varying different parameters like temperature, residence time, solid concentration, mass ratio and catalyst including types of biomasses. HTWW characterization, parameters, reaction mechanism and its application were also summarized. By considering the challenges of HTWW, some suggestions and proposed methodology to overcome the bottleneck are provided.

Effects of chemical pretreatments on material solubilization of Areca catechu L. husk: Digestion, biodegradability, and kinetic studies for biogas yield

This study aimed to understand the pretreatment-aided anaerobic digestion of lignocellulosic residues and to assess the substrate solubilization capacity of pretreatment processes. We evaluated the feasibility of biogas production using chemically pretreated Areca catechu L. (Arecanut husk, AH). AH was pretreated for 24h at two different temperatures-25 °C and 90 °C with four different chemicals viz. H₂SO₄ (acidic), NaOH (alkaline), H₂O₂ (oxidative), and ethanol in 1% H₂SO₄ (organosolv) under each temperature. AH solubilization assessment included analyses of parameters such as volatile solids to total solids (VS:TS) ratio, soluble chemical oxygen demand, total phenolic content, and biomass composition. Alkaline pretreatment of AH at 90 °C resulted in the maximum biogas yield of 683.89mL/gVS, which was 2.3 times more than that obtained using raw AH without pretreatment. Methane content of biogas produced using AH pretreated with 2-10% of NaOH was found to be between 71.53% and 75.06%; methane content of biogas using raw AH was 62.31%. In order to describe the AH degradation patterns, biogas production potential from pretreated AH was evaluated using bacterial kinetic growth models (First-order exponential, logistic, transference, and modified Gompertz models). The modified Gompertz and logistic models (correlation coefficient >0.99) were found to have the best fit of all kinetic models for the cumulative experimental biogas curve. We formulated a multiple linear regression equation depicting the biodegradability index (BI) as a technical tool to determine biomethane production; BI is represented as a function of biomass composition (cellulose, hemicellulose, and lignin), with a high correlation (>0.95). Based on our analyses of AH pretreatment and substrate utilization for biogas production, we propose that the biochemical composition of lignocellulosic residues should be carefully considered to ensure their biodegradability when subjected to anaerobic digestion.

An innovative approach for reducing the water and alkali consumption in the lactic acid fermentation via the reuse of pretreated liquid

This study focuses on enhancing lactic acid (LA) production and declining water and alkali consumption by reusing the pretreated liquid (PL) of spent mushroom substance (SMS) in the co-fermentation of food waste (FW) and SMS. First, the compositions of PL are identified, and the effects of the PL inhibitors on enzymatic hydrolysis and fermentation are explored. The PL phenol concentrations exceeded 2 g/L, which affected LA fermentation. Therefore, PL phenols were removed by adjusting the pH value, and the detoxified PL (DPL) phenol concentrations were 70.3% lower than those of PL. Different PL:DPL ratios were established to reuse in the fermentation process, and the LA concentration in the 50% PL + 50% DPL group was the highest (56.7 g/L). Then, pretreated SMS was not water-washed, and a neutralizer was prepared with the PL, LA production remained unchanged. Water and NaOH consumption decreased by 84.6% and 52.0%, respectively, and no wastewater was produced.