A whole-cell bioreporter assay for quantitative genotoxicity evaluation of environmental samples

Recent Trends in Chemical Sensors for Detecting Toxic Materials

Industrial development has led to the widespread production of toxic materials, including carcinogenic, mutagenic, and toxic chemicals. Even with strict management and control measures, such materials still pose threats to human health. Therefore, convenient chemical sensors are required for toxic chemical monitoring, such as optical, electrochemical, nanomaterial-based, and biological-system-based sensors. Many existing and new chemical sensors have been developed, as well as new methods based on novel technologies for detecting toxic materials. The emergence of material sciences and advanced technologies for fabrication and signal-transducing processes has led to substantial improvements in the sensing elements for target recognition and signal-transducing elements for reporting interactions between targets and sensing elements. Many excellent reviews have effectively summarized the general principles and applications of different types of chemical sensors. Therefore, this review focuses on chemical sensor advancements in terms of the sensing and signal-transducing elements, as well as more recent achievements in chemical sensors for toxic material detection. We also discuss recent trends in biosensors for the detection of toxic materials.

Application of whole-cell bioreporters for ecological risk assessment and bioremediation potential evaluation after a benzene exceedance accident in groundwater in Lanzhou, China

Oil spill events challenge human health and ecosystem safety, which are priority concerned issues for sustainable development. There is then an increasing demand of tools for ecological risks assessment at contaminated sites. In this study, we introduced two whole-cell bioreporters, ADPWH_alk and ADPWH_recA, to measure the available n-alkanes and the genotoxicities of total petroleum hydrocarbons in soils and groundwater which were contaminated by the Benzene Exceedance Accident in Lanzhou, China. Comparing to traditional chemical analysis methods, the whole-cell bioreporter method could provide risk assessment on cell level within a shorter time and a less cost, which is economical and environment friendly. The highest contents of available alkanes in soil and groundwater were 18,737 mg/kg and 308.4 mg/L, respectively. In addition, the available n-alkanes significantly (p < 0.01) correlated to chemical analysis of total n-alkanes. The highest genotoxicity level was found in soil and groundwater samples with lower TPHs concentration (4338.0 mg/kg and 1.4 mg/L Mitomycin C equivalent), suggesting the significant impacts of geochemical variables and alkane availability on the ecological risks of petroleum contamination. Combining chemical analysis and whole-cell bioreporter results, bioremediation strategies were suggested for groundwater and soils with higher n-alkane availability and lower ecological risks, whereas chemical oxidation were suggested for other contaminated sites. For the first time, we mapped the distribution of available n-alkanes and petroleum toxicities in a large scale soil-groundwater system using whole-cell bioreporters, showing their huge potential for rapid contaminant detection and fast risk assessment.

Application of magnetic-nanoparticle functionalized whole-cell biosensor array for bioavailability and ecotoxicity estimation at urban contaminated sites

The bioavailability and ecotoxicity of pollutants are important for urban ecological systems and human health, particularly at contaminated urban sites. Therefore, whole-cell bioreporters are used in many studies to assess the risks of priority chemicals; however, their application is restricted by low throughput for specific compounds and complicated operations for field tests. In this study, an assembly technology for manufacturing Acinetobacter-based biosensor arrays using magnetic nanoparticle functionalization was developed to solve this problem. The bioreporter cells maintained high viability, sensitivity, and specificity in sensing 28 priority chemicals, seven heavy metals, and seven inorganic compounds in a high-throughput manner, and their performance remained acceptable for at least 20 d. We also tested the performance by assessing 22 real environmental soil samples from urban areas in China, and our results showed positive correlations between the biosensor estimation and chemical analysis. Our findings prove the feasibility of the magnetic nanoparticle-functionalized biosensor array to recognize the types and toxicities of multiple contaminants for online environmental monitoring at contaminated sites.

Research progress on the magnetite nanoparticles in the fields of water pollution control and detection

Magnetite nanoparticles (MNPs) have shown increasing application in the fields of water pollution control and detection due to their perfect combination of interfacial functionalities and physicochemical properties, such as surface interface adsorption, (synergistic) reduction, catalytic oxidation, and electrical chemistry. This review presents the research advances in the synthesis and modification methods of MNPs in recent years, systematically summarizes the performances of MNPs and their modified materials in terms of three technical systems, including single decontamination system, coupled reaction system, and electrochemical system. In addition, the progress of the key roles played by MNPs in adsorption, reduction, catalytic oxidative degradation and their coupling with zero-valent iron for the reduction of pollutants are described. Moreover, the application prospect of MNPs-based electrochemical working electrodes for detecting micro-pollutants in water were also discussed in detail. This review addresses that the construction of MNPs-based systems for water pollution control and detection should be adapted to the natures of the target pollutants in water. Finally, the following research directions of MNPs and their remaining challenges are outlooked. In general, this review will inspire MNPs researchers in different fields for effective control and detection of a variety of contaminants in water.

Genetic circuits in microbial biosensors for heavy metal detection in soil and water

With the rapid population growth, the world is witnessing an ever-increasing demand for energy and natural resources. Consequently, soil, air, and water are polluted with diverse pollutants, including heavy metals (HM). The detection of heavy metals is necessary to remediate them, which is achieved with biosensors. Initially, these HM were detected using atomic absorption spectroscopy (AAS), emission spectroscopy, mass spectrometry, gas chromatography etc., but these were costly and time consuming which further paved a way for microbe-based biosensors. The development of genetic circuits for microbe-based biosensors has become more popular in recent years for heavy metal detection. In this review, we have especially discussed the various types of genetic circuits such as toggle switches, logic gates, and amplification modules used in these biosensors as they are used to enhance sensitivity and specificity. Genetic circuits also allow for rapid and multiple analyte detection at the same time. The use of microbial biosensors for the detection of HM in the soil as well as the water is also described below. Although with a higher success rate than classical biosensors, these microbial biosensors still have some drawbacks like bioavailability and size of the analyte which are needed to be addressed.

Toxicity Characterization of Environment-Related Pollutants Using a Biospectroscopy-Bioreporter-Coupling Approach: Potential for Real-World Toxicity Determination and Source Apportionment of Multiple Pollutants

Exposure to environmental pollutants occurs ubiquitously and poses many risks to human health and the ecosystem. Although many analytical methods have been developed to assess such jeopardies, the circumstances applying these means are restricted to linking the toxicities to compositions in the pollutant mixtures. The present study proposes a novel analytical approach, namely, biospectroscopy-bioreporter-coupling (BBC), to quantify and apportion the toxicities of metal ions and organic pollutants. Using a toxicity bioreporter ADPWH_recA and Raman spectroscopy, both bioluminescent signals and spectral alterations had similar dosage- and time-response behavior to the toxic compounds, validating the possibility of coupling these two methods from practical aspects. Raman spectral alterations successfully distinguished the biomarkers for different toxicity mechanisms of individual pollutants, such as ring breathing mode of DNA/RNA bases (1373 cm^-1) by Cr, reactive oxygen species-induced peaks of proteins (1243 cm^-1), collagen (813 cm^-1), and lipids (1255 cm^-1) by most metal ions, and indicative fingerprints of organic toxins. The support vector machine model had a satisfactory performance in distinguishing and apportioning toxicities of individual toxins from all input data, achieving a sensitivity of 88.54% and a specificity of 97.80%. This work set a preliminary database for Raman spectral alterations of whole-cell bioreporter response to multiple pollutants. It proved the state-of-the-art concept that the BBC approach is feasible to rapidly quantify and precisely apportion toxicities of numerous pollutant mixtures.

We need to plan streamlined environmental impact assessment for the future X-Press Pearl disasters

The X-Press Pearl disaster illustrates the urgent needs for streamlined environmental impact assessment to inform decision making. The environmental contamination caused by the disaster is complex, and the biological impact of different environmental stressors, and at different biological scales, needs to be determined. Traditional methods for analyzing complex environmental stressors are often inefficient and do not reflect the biological impact of pollution. The combination of chemical stressors and biological impacts is the key to environmental impact assessment based on integrated monitoring. Whole-cell bioreporters are tools for rapid, efficient and quantitative detection of the bioavailability, stressor effects, and toxicity of pollutants, i.e., spanning a wide range of applications. Here we propose the view that using whole-cell bioreporter technology to streamline short-term environmental impact assessment for maritime disasters such as the X-Press Pearl is more fit-for-purpose/practical than other approaches in use.

Simultaneous determination of heavy metal concentrations and toxicities by diffusive gradient in thin films containing Acinetobacter whole-cell bioreporters (Bio-DGT)

Heavy metal contaminations may cause severe toxic impacts to ecological systems and human health. Measurements of metals' bioavailable concentrations and toxicities simultaneously and in-situ in environments can advance the understanding of their hazardous effects. The diffusive gradients in thin-films (DGT) is an in-situ technique can measure metal speciation and labile concentrations, but cannot yet provide the direct toxicity information. The whole-cell bioreporter Acinetobacter baylyi ADPWH_recA was successfully incorporated into the DGT device to develop a novel technique, Bio-DGT, for assessing the toxicity of metals at the same time of measuring their labile concentrations. The bioassay used in Bio-DGT can sense the mixture toxicity from multiple contaminants and the DGT can assist in identifying which toxicants may be causing the toxicity. Cadmium was used as the model metal to test the performance of Bio-DGT in waters and soils. The masses of Cd accumulated in Bio-DGT increased linearly and theoretically with time for 7 days deployment, indicating little influences from bioreporter cells on DGT performance. A positive relationship between bioluminescent signals towards Cd demonstrated the sensitive and active bioreporters' response. The sensitive of Bio-DGT, indicated by Cd concentrations causing the response, is 0.01 mg/L. The stable response from Bio-DGT under various conditions (pH 4-8, ionic strengths 0.01-0.5 M) and 30 days storage time suggest the applicability of the technique in real environments. The deployment of Bio-DGT in contaminated soils demonstrated that Cd toxicity was regulated by labile concentration, showing its potential application for the risk assessment of heavy metal contaminations, and its further feasibility in using Bio-DGT for measuring integration of multiple contaminants' effects and simultaneously determine the main toxicity driver(s).

Application of the Luminescent luxCDABE Gene for the Rapid Screening of Antibacterial Substances Targeting Pseudomonas aeruginosa

Pseudomonas aeruginosa (P. aeruginosa) is a typical Gram-negative bacterium that can cause the spoilage of catered food products. Using a luminescent reporter gene (luxCDABE), this study sought to construct a cell-based biosensor (PAO1-CE) to rapidly screen antibacterial substances against P. aeruginosa. A total of six antibiotics belonging to five categories were used as the model test substances. The results of the bioluminescence detection method were verified using traditional antibacterial research assessments. The correlation coefficient of the regression equation fitting the data generated using this method was greater than 0.98, supporting the credibility of this approach. Additionally, the EC₅₀ of each of the antibiotics assessed in this study was lower than the 1/2 MIC determined by conventional means. All six of the antibiotics caused varying degrees of damage to the cell membrane and cell wall of P. aeruginosa. Importantly, this novel method helped shorten the time necessary for active-compound detection and could be used for high-throughput detection, which would also help improve the detection efficiency. The application of this method towards the discovery of novel antibacterial compounds targeting P. aeruginosa holds substantial promise for greatly improving the efficiency of compound discovery.

Response of soil microbial communities to petroleum hydrocarbons at a multi-contaminated industrial site in Lanzhou, China

Total petroleum hydrocarbon (TPH) contamination poses threats to ecological systems and human health. Many studies have reported its negative impacts on soil microbes, but limited information is known about microbial change and response to multiple TPH contamination events. In this study, we investigated TPH contamination level, microbial community structure and functional genes at a multi-contaminated industrial site in Lanzhou, where a benzene spill accident caused the drinking water crisis in 2014. TPHs distribution in soils and groundwater indicated multiple TPH contamination events in history, and identified the spill location where high TPH level (6549 mg kg^-1) and high ratio of low-molecular-weight TPHs (>80%) were observed. In contrast, TPH level was moderate (349 mg kg^-1) and the proportion of low-molecular-weight TPHs was 44% in soils with a long TPH contamination history. After the spill accident, soil bacterial communities became significant diverse (p = 0.047), but the dominant microbes remained the same as Pseudomonadaceae and Comamonadaceae. The abundance of hydrocarbon-degradation related genes increased by 10-1000 folds at the site where the spill accident occurred in multi-contaminated areas and was significantly related to 2-ring PAHs. Such changes of microbial community and hydrocarbon-degradation related genes together indicated the resilience of soil indigenous microbes toward multiple contamination events. Our results proved the significant change of bacterial community and huge shift of hydrocarbon-degradation related genes after the spill accident (multiple contamination events), and provided a deep insight into microbial response at industrial sites with a long period of contamination history.

Health Risk Assessment during In Situ Remediation of Cr(VI)-Contaminated Groundwater by Permeable Reactive Barriers: A Field-Scale Study

The presence of residual Cr(VI) in soils causes groundwater contamination in aquifers, affecting the health of exposed populations. Initially, permeable reactive barriers(PRB) effectively removed Cr(VI) from groundwater. However, as PRB clogging increased and Cr(VI) was released from upstream soils, the contamination plume continued to spread downstream. By 2020, the level of contamination in the downstream was nearly identical to that in the upstream. The study results show that during normal operation, the PRB can successfully remove Cr(VI) from contaminated groundwater and reduce the carcinogenic and non-carcinogenic risks to humans from the downstream side of groundwater. However, the remediated groundwater still poses an unacceptable risk to human health. The sensitivity analysis revealed that the concentration of the pollutant was the most sensitive parameter and interacted significantly with other factors. Ultimately, it was determined that the residual Cr(VI) in the soil of the study region continues to contaminate the groundwater and constitutes a serious health danger to residents in the vicinity. As remediated groundwater still poses a severe threat to human health, PRB may not be as effective as people believe.

Use of whole-cell bioreporters to assess bioavailability of contaminants in aquatic systems

Water contamination has become increasingly a critical global environmental issue that threatens human and ecosystems’ health. Monitoring and risk assessment of toxic pollutants in water bodies is essential to identifying water pollution treatment needs. Compared with the traditional monitoring approaches, environmental biosensing via whole-cell bioreporters (WCBs) has exhibited excellent capabilities for detecting bioavailability of multiple pollutants by providing a fast, simple, versatile and economical way for environmental risk assessment. The performance of WCBs is determined by its elements of construction, such as host strain, regulatory and reporter genes, as well as experimental conditions. Previously, numerous studies have focused on the design and construction of WCB rather than improving the detection process and commercialization of this technology. For investigators working in the environmental field, WCB can be used to detect pollutants is more important than how they are constructed. This work provides a review of the development of WCBs and a brief introduction to genetic construction strategies and aims to summarize key studies on the application of WCB technology in detection of water contaminants, including organic pollutants and heavy metals. In addition, the current status of commercialization of WCBs is highlighted.

Dynamic changes in the microbial community in the surface seawater of Jiaozhou Bay after crude oil spills: An in situ microcosm study

The changes in the composition and structure of microbial communities in Jiaozhou Bay are strongly affected by marine oil pollution, but the outcomes of the microbial responses and effects of dispersant application remain unclear. Herein, we performed an in situ microcosm study to investigate the response of the indigenous microbial community under crude oil alone and combined oil and dispersant treatment in the surface seawater of a semi-enclosed marine area of Jiaozhou Bay. The dynamics of the bacterial classification based on 16s rDNA sequencing were used to assess the changes with the crude oil concentration, dispersant use, and time. The crude oil resulted in a high abundance of the genera Pseudohongiella, Cycloclasticus, Marivita, and C1-B045 from the Gammaproteobacteria and Alphaproteobacteria classes, suggesting for hydrocarbon degradation. However, the dispersant treatment was more advantageous for Pacificibacter, Marivita, and Loktanella. Besides accelerating the rate of bacterial community succession, the dispersants had significantly stronger effects on the structure of the bacterial community and the degradation functions than the oil. A higher dose of oil exposure corresponded to fewer dominant species with a high relative abundance. Our study provides information for screening potential degradation bacteria and assessing the risks that oil spills pose to marine ecosystems.

In-vitro toxicity assessment of Eucalyptus robusta Smith extracts via whole-cell bioreporter

Eucalyptus is widely planted in China for wood industries, and there are increasing concerns about its ecotoxicity in the environment. This study explored the in-vitro toxicity of Eucalyptus extracts by assessing the impacts of water-soluble and dimethylsulfoxide (DMSO)-soluble fractions via a whole-cell bioreporter, Acinetobacter baylyi ADPWH_recA. Compounds identified in Eucalyptus extracts included one tannin, two phenolic acids, four terpenoids, four glycosides, and five flavonoids. The leaf extracts contained more biological-active components than barks and roots. Genotoxicity induced by Eucalyptus extracts was mainly associated with water extracts (e.g., flavonoids, phenolic acids) instead of DMSO extracts. The significant cytotoxicity was explained by programmed cell death (PCD), suggested by the results of propidium iodide (PI) and 2',7'-dichlorofluorescein-diacetate (DCFH-DA) assays. Generally, water-soluble fractions contributed more toxicities than DMSO-soluble fractions, particularly at high concentrations. A robust linear regression was built between the compromised toxicity and PCD index (Compromised toxicity = -2.192 × PCD index + 2.219; R² = 0.8886), suggesting a PCD-dependent compromised toxicity which was greatly underestimated. Our results implied non-neglectable ecotoxicological risks of Eucalyptus extracts, hinting at the possible magnified ecological impacts of its large-scale plantation and the potential adverse outcomes to the surrounding ecosystems.

Transcription Factor-Based Biosensors for Detecting Pathogens

Microorganisms are omnipresent and inseparable from our life. Many of them are beneficial to humans, while some are not. Importantly, foods and beverages are susceptible to microbial contamination, with their toxins causing illnesses and even death in some cases. Therefore, monitoring and detecting harmful microorganisms are critical to ensuring human health and safety. For several decades, many methods have been developed to detect and monitor microorganisms and their toxicants. Conventionally, nucleic acid analysis and antibody-based analysis were used to detect pathogens. Additionally, diverse chromatographic methods were employed to detect toxins based on their chemical and structural properties. However, conventional techniques have several disadvantages concerning analysis time, sensitivity, and expense. With the advances in biotechnology, new approaches to detect pathogens and toxins have been reported to compensate for the disadvantages of conventional analysis from different research fields, including electrochemistry, nanotechnology, and molecular biology. Among them, we focused on the recent studies of transcription factor (TF)-based biosensors to detect microorganisms and discuss their perspectives and applications. Additionally, the other biosensors for detecting microorganisms reported in recent studies were also introduced in this review.

Toxicity assessment and microbial response to soil antibiotic exposure: differences between individual and mixed antibiotics

Increasing amounts of antibiotics are introduced into soils, raising great concerns on their ecotoxicological impacts on the soil environment. This work investigated the individual and joint toxicity of three antibiotics, tetracycline (TC), sulfonamide (SD) and erythromycin (EM) via a whole-cell bioreporter assay. TC, SD and EM in aqueous solution demonstrated cytotoxicity, whilst soil exposure showed genotoxicity, indicating that soil particles possibly affected the bioavailability of antibiotics. Toxicity of soils exposed to TC, SD and EM changed over time, demonstrating cytotoxic effects within 14-d exposure and genotoxic effects after 30 days. Joint toxicity of TC, SD and EM in soils instead showed cytotoxicity, suggesting a synergetic effect. High-throughput sequencing suggested that the soil microbial response to individual antibiotics and their mixtures showed a different pattern. Soil microbial community composition was more sensitive to TC, in which the abundance of Pseudomonas, Pirellula, Subdivision3_genera_incertae_sedis and Gemmata varied significantly. Microbial community functions were significantly shifted by EM amendments, including signal transduction mechanisms, cytoskeleton, cell wall/membrane/envelope biogenesis, transcription, chromatin structure and dynamics, and carbohydrate transport and metabolism. This work contributes to a better understanding of the ecological effects and potential risks of individual and joint antibiotics on the soil environment.

Key Cr species controlling Cr stability in contaminated soils before and chemical stabilization at a remediation engineering site

Linking chromium (Cr) speciation with its stability in soils is vital because insoluble Cr(VI) and chemically adsorbed Cr(VI) could hinder the remediation efficiency and release Cr(VI) for a prolonged period of time. In this study, we investigated key Cr species to probe the mechanisms controlling the release of insoluble Cr(VI) at Cr-contaminated sites using synchrotron-based X-ray absorption near-edge structure (XANES) for the first time. Chromite, stichtite and Cr-silicate were predominant forms of Cr(III). Insoluble Cr(VI) was hosted by layered double hydroxides (LDHs) such as brownmilerite and hydrotalcite. Anion competition tests documented a substitution of absorbed Cr(VI) by SO₄^2- and NO₃^-. Acid extraction released 6.7-25.7% more Cr(VI) than anion extraction, possibly attributing to the erosion of LDH and CaCrO₄ in calcite rather than Cr-bearing minerals. Brown and red soils released maximally 62% and 44% of total Cr(VI) by 10 mol/(kg soil) and 2 mol/(kg soil) of H⁺, respectively. SO₄^2-, H₂O and H⁺ contributed to more release of total Cr(VI) in brown soils (22%, 33% and 7%) than red soils (25%, 17% and 2%). More crystalline Cr structures were found after chemical stabilization, indicating a higher Cr stability in chemically stabilized soils. Cr and Mn exhibited an overlapped distribution pattern in both contaminated and chemically stabilized soils, hinting at the re-oxidation of Cr(III). Insoluble Cr(VI) could be released by acidic rainfalls and soil organic matters, posing potential threats to Cr long-term stability in field-scale remediation.

Chromogenic Escherichia coli reporter strain for screening DNA damaging agents

The presence of pollutants in soil and water has given rise to diverse analytical and biological approaches to detect and measure contaminants in the environment. Using bacterial cells as reporter strains represents an advantage for detecting pollutants present in soil or water samples. Here, an Escherichia coli reporter strain expressing a chromoprotein capable of interacting with soil or water samples and responding to DNA damaging compounds is validated. The reporter strain generates a qualitative signal and is based on the expression of the coral chromoprotein AmilCP under the control of the recA promoter. This strain can be used simply by applying soil or water samples directly and rendering activation upon DNA damage. This reporter strain responds to agents that damage DNA (with an apparent detection limit of 1 µg of mitomycin C) without observable response to membrane integrity damage, protein folding or oxidative stress generating agents, in the latter case, DNA damage was observed. The developed reporter strain reported here is effective for the detection of DNA damaging agents present in soils samples. In a proof-of-concept analysis using soil containing chromium, showing activation at 15.56 mg/L of Cr(VI) present in soil and leached samples and is consistent with Cr(III) toxicity at high concentrations (130 µg). Our findings suggest that chromogenic reporter strains can be applied for simple screening, thus reducing the number of samples requiring analytical techniques.

Microbial whole-cell biosensors: Current applications, challenges, and future perspectives

Microbial Whole-Cell Biosensors (MWCBs) have seen rapid development with the arrival of 21st century biological and technological capabilities. They consist of microbial species which produce, or limit the production of, a reporter protein in the presence of a target analyte. The quantifiable signal from the reporter protein can be used to determine the bioavailable levels of the target analyte in a variety of sample types at a significantly lower cost than most widely used and well-established analytical instrumentation. Furthermore, the versatile and robust nature of MWCBs shows great potential for their use in otherwise unavailable settings and environments. While MWCBs have been developed for use in biomedical, environmental, and agricultural monitoring, they still face various challenges before they can transition from the laboratory into industrialized settings like their enzyme-based counterparts. In this comprehensive and critical review, we describe the underlying working principles of MWCBs, highlight developments for their use in a variety of fields, detail challenges and current efforts to address them, and discuss exciting implementations of MWCBs helping redefine what is thought to be possible with this expeditiously evolving technology.

Modular tuning engineering and versatile applications of genetically encoded biosensors

Genetically encoded biosensors have a diverse range of detectable signals and potential applications in many fields, including metabolism control and high-throughput screening. Their ability to be used in situ with minimal interference to the bioprocess of interest could revolutionize synthetic biology and microbial cell factories. The performance and functions of these biosensors have been extensively studied and have been rapidly improved. We review here current biosensor tuning strategies and attempt to unravel how to obtain ideal biosensor functions through experimental adjustments. Strategies for expanding the biosensor input signals that increases the number of detectable compounds have also been summarized. Finally, different output signals and their practical requirements for biotechnology and biomedical applications and environmental safety concerns have been analyzed. This in-depth review of the responses and regulation mechanisms of genetically encoded biosensors will assist to improve their design and optimization in various application scenarios.

Whole cell microalgal-cyanobacterial array biosensor for monitoring Cd, Cr and Zn in aquatic systems

Bioavailable content of metals in aquatic systems has become critical in assessing the toxic effect of metals accumulating in the environment. Considering the need for rapid measurements, an optical microalgal-cyanobacterial array biosensor was developed using two strains of microalgae, Mesotaenium sp. and a strain of cyanobacteria Synechococcus sp. to detect Cd²⁺, Cr⁶⁺ and Zn²⁺ in aquatic systems. Microalgal and cyanobacterial cells were immobilized in a 96-well microplate using sol-gel method using silica. Optimum operational conditions for the biosensor array such as exposure time, storage stability, pH, and multiple metal effect were tested. A 10 min exposure time yielded optimum fluorescence values. Metal toxicity increased with decreasing pH, resulting in low relative fluorescence (%) and decreased with increasing pH, resulting in higher relative fluorescence (%). The optimum storage time for biosensor strains were 4 weeks for microalgal cultures and 8 weeks for cyanobacterial culture, at 4 °C storage temperature. The metal mixtures showed less effect on the inhibition of relative fluorescence (%) of microalgal/cyanobacterial cultures, displaying an antagonistic behavior among the metals tested. As a single unit, this photosynthetic array biosensor will be a valuable tool in detecting multi-metals in aquatic systems.

In-situ monitoring of xenobiotics using genetically engineered whole-cell-based microbial biosensors: recent advances and outlook

Industrialisation, directly or indirectly, exposes humans to various xenobiotics. The increased magnitude of chemical pesticides and toxic heavy metals in the environment, as well as their intrusion into the food chain, seriously threatens human health. Therefore, the surveillance of xenobiotics is crucial for social safety and security. Online investigation by traditional methods is not sufficient for the detection and identification of such compounds because of the high costs and their complexity. Advancement in the field of genetic engineering provides a potential opportunity to use genetically modified microorganisms. In this regard, whole-cell-based microbial biosensors (WCBMB) represent an essential tool that couples genetically engineered organisms with an operator/promoter derived from a heavy metal-resistant operon combined with a regulatory protein in the gene circuit. The plasmid controls the expression of the reporter gene, such as gfp, luc, lux and lacZ, to an inducible gene promoter and has been widely applied to assay toxicity and bioavailability. This review summarises the recent trends in the development and application of microbial biosensors and the use of mobile genes for biomedical and environmental safety concerns.

Whole-Cell Microbial Bioreporter for Soil Contaminants Detection

Anthropogenic activities have released various contaminants into soil that pose a serious threat to the ecosystem and human well-being. Compared to conventional analytical methodologies, microbial cell-based bioreporters are offering a flexible, rapid, and cost-effective strategy to assess the environmental risks. This review aims to summarize the recent progress in the application of bioreporters in soil contamination detection and provide insight into the challenges and current strategies. The biosensing principles and genetic circuit engineering are introduced. Developments of bioreporters to detect and quantify heavy metal and organic contaminants in soil are reviewed. Moreover, future opportunities of whole-cell bioreporters for soil contamination monitoring are discussed.

Recent advances in the application of magnetic Fe3O4 nanomaterials for the removal of emerging contaminants

Emerging contaminants (ECs) are widely distributed and potentially hazardous to human health and the ecological system. However, traditional wastewater treatment techniques are not sufficient to remove ECs. Magnetic nanomaterials are made of ferromagnetic or superparamagnetic magnetic elements such as iron and nickel, which can be easily separated from the aqueous solution, making them ideal adsorbents for contaminants in water. This review focused on the synthesis approaches of magnetic Fe₃O₄ nanoparticles (MFNs), as well as surface modification in order to improve their stability and functional diversity. Also, a detailed summary on the state-of-art application of magnetic nanomaterials on the removal of ECs was addressed. Additionally, challenges and future prospective of applying magnetic nanomaterials into real-world cases were discussed, in which the green and simple synthesis and evaluation of the toxic effects of MFNs are still of great challenge. This work summarizes the recent progress of using magnetic nanomaterials as promising and powerful tools in the treatment of ECs-contaminated water, benefiting researchers interested in nanomaterials and environmental studies.

Water toxicity evaluations: Comparing genetically modified bioluminescent bacteria and CHO cells as biomonitoring tools

The use of water for drinking and agriculture requires knowledge of its toxicity. In this study, we compared the use of genetically modified bioluminescent (GMB) bacteria whose luminescence increases in the presence of toxicants and Chinese Hamster Ovary (CHO) cells for the characterization of the toxicity of water samples collected from a lake and streams, hydroponic and aquaponic farms, and a wastewater treatment plant. GMB bacteria were used to probe genotoxicity, cytotoxicity and reactive oxygen species-induced effects in the whole water samples. Unlike GMB bacteria, the use of CHO cells requires XAD resin-based pre-concentration of toxic material present in water samples for the subsequent cytotoxicity assay. In addition to the examination of the toxicity of the water from the different sources, the GMB bacteria were also used to test the XAD extracts diluted to the concentrations causing 50% growth inhibition of the CHO cells. The two biomonitoring tools provided different results when they were used to test the above-mentioned diluted XAD extracts. A pre-concentration procedure based on adsorption by XAD resins with subsequent elution was not sufficient to represent the material responsible for the toxicity of the whole water samples toward the GMB bacteria. Therefore, the use of XAD resin extracts may lead to major underestimates of the toxicity of water samples. Although the toxicity findings obtained using the GMB bacteria and CHO cells may not correlate with each another, the GMB bacteria assay did provide a mechanism-specific biomonitoring tool to probe the toxicity of water samples without a need for the pre-concentration step.

Mathematical Modeling Approaches for Assessing the Joint Toxicity of Chemical Mixtures Based on Luminescent Bacteria: A Systematic Review

Developments in industrial applications inevitably accelerate the discharge of enormous substances into the environment, whereas multi-component mixtures commonly cause joint toxicity which is distinct from the simple sum of independent effect. Thus, ecotoxicological assessment, by luminescent bioassays has recently brought increasing attention to overcome the environmental risks. Based on the above viewpoint, this review included a brief introduction to the occurrence and characteristics of toxic bioassay based on the luminescent bacteria. In order to assess the environmental risk of mixtures, a series of models for the prediction of the joint effect of multi-component mixtures have been summarized and discussed in-depth. Among them, Quantitative Structure-Activity Relationship (QSAR) method which was widely applied in silico has been described in detail. Furthermore, the reported potential mechanisms of joint toxicity on the luminescent bacteria were also overviewed, including the Trojan-horse type mechanism, funnel hypothesis, and fishing hypothesis. The future perspectives toward the development and application of toxicity assessment based on luminescent bacteria were proposed.

Development of a Sensitive Escherichia coli Bioreporter Without Antibiotic Markers for Detecting Bioavailable Copper in Water Environments

The whole-cell bioreporters based on the cop-operon sensing elements have been proven specifically useful in the assessment of bioavailable copper ions in water environments. In this study, a series of experiments was conducted to further improve the sensitivity and robustness of bioreporters. First, an Escherichia coli △copA△cueO△cusA mutant with three copper transport genes knocked out was constructed. Then, the copAp::gfpmut2 sensing element was inserted into the chromosome of E. coli △copA△cueO△cusA by gene knock-in method to obtain the bioreporter strain E. coli WMC-007. In optimized assay conditions, the linear detection range of Cu²⁺ was 0.025–5 mg/L (0.39–78.68 μM) after incubating E. coli WMC-007 in Luria–Bertani medium for 5 h. The limit of detection of Cu²⁺ was 0.0157 mg/L (0.25 μM). Moreover, fluorescence spectrometry and flow cytometry experiments showed more environmental robustness and lower background fluorescence signal than those of the sensor element based on plasmids. In addition, we found that the expression of GFPmut2 in E. coli WMC-007 was induced by free copper ions, rather than complex-bound copper, in a dose-dependent manner. Particularly, the addition of 40 mM 3-(N-Morpholino)propanesulfonic acid buffer to E. coli WMC-007 culture enabled accurate quantification of bioavailable copper content in aqueous solution samples within a pH range from 0.87 to 12.84. The copper recovery rate was about 95.88–113.40%. These results demonstrate potential applications of E. coli WMC-007 as a bioreporter to monitor copper contamination in acidic mine drainage, industrial wastewater, and drinking water. Since whole-cell bioreporters are relatively inexpensive and easy to operate, the combination of this method with other physicochemical techniques will in turn provide more specific information on the degree of toxicity in water environments.

iTRAQ-Based Comparative Proteomic Analysis of Acinetobacter baylyi ADP1 Under DNA Damage in Relation to Different Carbon Sources

DNA damage response allows microorganisms to repair or bypass DNA damage and maintain the genome integrity. It has attracted increasing attention but the underlying influential factors affecting DNA damage response are still unclear. In this work, isobaric tags for relative and absolute quantification (iTRAQ)-based proteomic analysis was used to investigate the influence of carbon sources on the translational response of Acinetobacter baylyi ADP1 to DNA damage. After cultivating in a nutrient-rich medium (LB) and defined media supplemented with four different carbon sources (acetate, citrate, pyruvate, and succinate), a total of 2807 proteins were identified. Among them, 84 proteins involved in stress response were significantly altered, indicating the strong influence of carbon source on the response of A. baylyi ADP1 to DNA damage and other stresses. As the first study on the comparative global proteomic changes in A. baylyi ADP1 under DNA damage across nutritional environments, our findings revealed that DNA damage response in A. baylyi ADP1 at the translational level is significantly altered by carbon source, providing an insight into the complex protein interactions across carbon sources and offering theoretical clues for further study to elucidate their general regulatory mechanism to adapt to different nutrient environments.

Microbial degradation of organophosphorus pesticides: novel degraders, kinetics, functional genes, and genotoxicity assessment

Farmland soil sprayed with organophosphorus pesticides (OPs) annually was investigated for the identification and characterization of OP-degrading microorganisms. Six bacterial strains were identified, including Brevundimonas faecalis MA-B12 and Alcaligenes faecalis subsp. parafaecalis MA-B13 for methamidophos degradation, Citrobacter freundii TF-B21 and Ochrobactrum intermedium TF-B23 for trichlorfon degradation, Ochrobactrum intermedium DV-B31 for dichlorvos degradation, and Bacillus cereus for dimethoate degradation. The optimal biodegradation conditions for OPs were obtained at pH 7.0 and incubation temperature ranging from 28 to 37 °C. In an 8-day batch test, biodegradation of the four OPs all followed first-order kinetics, with biodegradation rates ranging from 58.08 to 96.42%. Functional genes responsible for OPs degradation were obtained, including ophB, ampA, opdE, opd, opdA, and mpd. As these strains were indigenous strains isolated from farmland soils, they can be potentially used as bacterial consortium for the bioremediation of mixed OP-contaminated soils. A time-course genotoxicity assessment of the degradation products was done by a bacterial whole-cell bioreporter, revealing that biodegradation of trichlorfon, dichlorvos, and dimethoate resulted a decreased genotoxicity within 5 days, which, however, significantly increased on day 8. The result demonstrated that more toxic products may be produced during the biodegradation processes of OPs, and more attention should be put not only on the pesticides themselves, but also on the toxic effects of their degradation products. To the best of our knowledge, this is for the first time that the genotoxicity of OP degradation products was evaluated by the bioreporter assay, broadening our understanding on the genotoxic risks of OPs during biodegradation process. Graphical Abstract.

Contamination, Sources, and Health Risks Associated with Soil PAHs in Rebuilt Land from a Coking Plant, Beijing, China

This study investigated the polycyclic aromatic hydrocarbon (PAH) pollution in the reconstructed land of an abandoned industrial site: a coking plant in Beijing. To meet the needs of urban development, many factories have had to be relocated from city centers, and abandoned industrial sites often need to be transformed into residential land or urban green space through a series of restoration measures. It is necessary to study the level of residual pollutants and potential risks associated with industrial reconstructed land. The concentration of 16 PAHs in the study area ranged from 314.7 to 1618.3 µg/kg, and the average concentration was still at a medium pollution level; the concentration of PAHs in the original coking workshop had the highest levels (1350.5 µg/kg). The PAHs in the soil were mainly low-ring aromatics, especially naphthalene and phenanthrene. The isomer method and principal component analysis indicated that PAHs in the topsoil were the result of coal and biomass combustion. The seven carcinogenic PAHs were the main contributors to the total toxicity equivalence. The genetic toxicity of benzo[a]pyrene was relatively low, and the results were related to the concentration level. There were potential carcinogenic risks for people of varying ages in this residential area. In total, gender differences were small, and the comprehensive lifetime cancer risk level was still acceptable. For the remaining plots at the study site, the daily intake of PAHs by construction workers was between 0.74⁻2.31 ng/kg bw/day, which requires further evaluation about ignored area occupational exposure to environmental pollutants.

Advances of magnetic nanoparticles in environmental application: environmental remediation and (bio)sensors as case studies

Nanotechnology is an emerging technique drawing increasing attentions in biomedical, electronic, environmental, and industrial application. Nanoparticles (NPs) possess unique optical, electrical, catalytic, and thermal properties, among which magnetic NPs (MNPs) are one of the most important groups with excellent superparamagnetism property, large surface area, and biocompatibility. In this review, methods for synthesizing and functionalizing MNPs are summarized and linked to their applications in environmental science as either adsorbents or catalysts for removing contaminants from environmental matrices, illustrating stronger reactivity, higher removal capacity, and fast kinetics. Additionally, we also comprehensively discuss the application of MNPs as (bio)sensors to selectively and sensitively detect the presence of environmental contaminants or pathogenic bacteria. This work summarizes the recent progresses of using MNPs as powerful tools in environmental science and engineering, raising their state-of-art application from environmental perspectives and benefiting researchers interested in NPs and environmental studies.

A mobile, modular and rapidly-acting treatment system for optimizing and improving the removal of non-aqueous phase liquids (NAPLs) in groundwater

Non-aqueous phase liquids (NAPLs) in pumped groundwater are highly variable, challenging the selection of above-ground treatment strategies in pump-and-treat system. Adjustable systems with multiple treatment units are urgently required. In the present study, a mobile, modular and rapidly-acting treatment system was developed to treat groundwater contaminated by NAPLs at a chemical industrial site. The system integrated four units of coagulation sedimentation, air flotation, air stripping and chemical oxidation. During a 3-month onsite operation, the composition of groundwater NAPLs had huge fluctuations and different treatment units had unique advantages in eliminating some components. For instance, air stripping exhibited satisfactory removal efficiencies (>80%) for short-chain petroleum hydrocarbons and chloroalkanes, but poor performance for others comparing to other units. A decision-making tool and a central control system were further developed to combine and adjust the four units in proper orders, achieving satisfied removal efficiency (70-90%) for multi-component NAPLs, regardless of composition fluctuation. These findings raise the state-of-the-art modular and rapidly-acting groundwater treatment system to clean up NAPLs contaminated groundwater through pump-and-treat strategy, help in better understanding on the decision and management to improve the treatment performance, and provide guidelines for its implication at other sites contaminated with multi-component NAPLs or undergoing accidental contamination.

Bacterial Bioreporter-Based Mercury and Phenanthrene Assessment in Yangtze River Delta Soils of China

Genetically engineered bacterial whole-cell bioreporters were deployed to investigate bioavailable mercury (b-Hg) and phenanthrene (b-PHE). Characterized by high sensitivity and specificity in aqueous solutions, the bioreporter system could detect in amended soils the concentrations of b-Hg and b-PHE in the ranges of 19.6 to 111.6 and 21.5 to 110.9 μg kg, respectively. The sensitivity of the system allowed for the combined analysis of b-Hg and b-PHE from real environmental samples. Therefore, soil samples from three large refinery facilities were tested, and the results from the instrumental analysis strongly correlated with the ones obtained with the bioreporter method. Large-scale and fast screening of soil contamination across the Yangtze River Delta in Eastern China was conducted. More than 36% of the samples contained b-Hg, whereas the fractions of b-PHE were below the detection limit for all the samples. These results indicated a higher toxicity and more hazardous condition for Hg contamination than for PHE. Population densities and airborne 10-μm particulate matter (PM10) concentrations were used as parameters for comparison with the spatial distribution of the b-Hg and b-PHE fractions. The results revealed that the bioreporters could offer a rapid and cost-efficient method to test soil samples from contaminated areas and provide a screening tool for environmental risk assessment.