Optimization of degradation of Reactive Black 5 (RB5) and electricity generation in solar photocatalytic fuel cell system

Sustainable degradation of pollutants, generation of electricity and hydrogen evolution via photocatalytic fuel cells: An Inclusive Review

Environmental pollution and energy crisis have recently become one of the major global concerns. Insincere discharge of massive amount of organic and inorganic wastes into the aqueous bodies causes serious impact on our environment. However, these organic substances are significant sources of carbon and energy that could be sustainably utilized rather than being discarded. Photocatalytic fuel cell (PFC) is a smart and novel energy conversion device that has the ability to achieve dual benefits: degrading the organic contaminants and simultaneously generating electricity, thereby helping in environmental remediation. This article presents a detailed study of the recent advancements in the development of PFC systems and focuses on the fundamental working principles of PFCs. The degradation of various common organic and inorganic contaminants including dyes and antibiotics with simultaneous power generation and hydrogen evolution has been outlined. The impact of various operational factors on the PFC activity has also been briefly discussed. Moreover, it provides an overview of the design guidelines of the different PFC systems that has been developed recently. It also includes a mention of the materials employed for the construction of the photo electrodes and highlights the major limitations and relevant research scopes that are anticipated to be of interest in the days to come. The review is intended to serve as a handy resource for researchers and budding scientists opting to work in this area of PFC devices.

Converting synthetic azo dye and real textile wastewater into clean energy by using synthesized CuO/C as photocathode in dual-photoelectrode photocatalytic fuel cell

Cathode in photocatalytic fuel cell (PFC) plays a crucial role in degradation of organic contaminants. In this study, synthesized copper oxide (CuO) was loaded on carbon plate and used as photocathode in PFC for degradation of synthetic azo dye Reactive Black 5 (RB5) and real textile wastewater. Morphology and structural phase of the synthesized CuO were analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. Several operating parameters had been investigated such as light irradiation, initial dye concentration, and pH of azo dye solution within 6 h of irradiation time. The lowest initial concentration of RB5 (10 mg L^-1) achieved 100% color removal compared to the highest initial concentration (40 mg L^-1) which only achieved 77.1% color removal within 6 h of irradiation time. The influence of external resistance was significant in electricity generation but trivial in dye degradation efficiency. The external resistance of 6000 Ω yielded highest maximum power density, with P_max of 0.2631 μW cm^-2, followed by 1000 Ω (0.2196 μW cm^-2) and 8000 Ω (0.1587 μW cm^-2), respectively. The real textile wastewater with dilution ratio (DR) 1:6 yielded the highest energy conversion efficiency, η (3.62%), followed by DR 1:4 (3.19%) and DR 1:2 (1.96%), respectively.

Optimization of the Decolorization of the Reactive Black 5 by a Laccase-like Active Cell-Free Supernatant from Coriolopsis gallica

The textile industry generates huge volumes of colored wastewater that require multiple treatments to remove persistent toxic and carcinogenic dyes. Here we studied the decolorization of a recalcitrant azo dye, Reactive Black 5, using laccase-like active cell-free supernatant from Coriolopsis gallica. Decolorization was optimized in a 1 mL reaction mixture using the response surface methodology (RSM) to test the influence of five variables, i.e., laccase-like activity, dye concentration, redox mediator (HBT) concentration, pH, and temperature, on dye decolorization. Statistical tests were used to determine regression coefficients and the quality of the models used, as well as significant factors and/or factor interactions. Maximum decolorization was achieved at 120 min (82 ± 0.6%) with the optimized protocol, i.e., laccase-like activity at 0.5 U mL−1, dye at 25 mg L−1, HBT at 4.5 mM, pH at 4.2 and temperature at 55 °C. The model proved significant (ANOVA test with p < 0.001): coefficient of determination (R²) was 89.78%, adjusted coefficient of determination (R²A) was 87.85%, and root mean square error (RMSE) was 10.48%. The reaction conditions yielding maximum decolorization were tested in a larger volume of 500 mL reaction mixture. Under these conditions, the decolorization rate reached 77.6 ± 0.4%, which was in good agreement with the value found on the 1 mL scale. RB5 decolorization was further evaluated using the UV-visible spectra of the treated and untreated dyes.

Photodegradation assessment of RB5 dye by utilizing WO3/TiO2 nanocomposite: a cytotoxicity study

Textile dyeing wastewater becomes one of the root causes of environmental pollution. Titanium dioxide (TiO₂) is one of the photocatalysts that shows prominent organic dye photodegradation ability. In this study, a porous tungsten oxide (WO₃)/TiO₂ composite was prepared through ultrasonic-assisted solvothermal technique with varying amounts of WO₃ ranging from 0.25 to 5 weight % (wt.%). The prepared 0.50 wt.% WO₃/TiO₂ (0.50WTi) composite exhibited the highest photodegradation activity (4.39 × 10^-2 min^-1) and complete mineralization in chemical oxygen demand (COD) reading towards 30 mg.L^-1 of Reactive Black 5 (RB5) dye under 60 min of light irradiation. Effects of large surface area, small crystallite size, high pore volume and size, and low electron-hole pair recombination rate attributed to the superiority of 0.50WTi. Besides, 0.50WTi could be reused, showing 86.50% of RB5 photodegradation at the fifth cycle. Scavenger study demonstrated that photogenerated hole (h⁺) was the main active species of 0.50WTi to initiate the RB5 photodegradation. Cytotoxicity assessment determined the readings of half-maximal inhibitory concentration (IC₅₀) were 1 mg.mL^-1 and 0.61 mg.mL^-1 (24 and 72 h of incubations) for the 0.50WTi composite.

Photocatalytic Degradation of Sugarcane Vinasse Using ZnO Photocatalyst: Operating Parameters, Kinetic Studies, Phytotoxicity Assessments, and Reusability

ABSTRACT

Photocatalytic degradation performance is highly related to optimized operating parameters such as initial concentration, pH value, and catalyst dosage. In this study, the impact of various parameters on the photocatalytic degradation of anaerobically digested vinasse (AnVE) has been determined through decolourization and chemical oxygen demand (COD) reduction efficiency using zinc oxide (ZnO) photocatalyst. In this context, the application of photocatalytic degradation in treating sugarcane vinasse using ZnO is yet to be explored. The COD reduction efficiency and decolourization achieved 83.40% and 99.29%, respectively, under the conditions of 250 mg/L initial COD concentration, pH 10, and 2.0 g/L catalyst dosage. The phytotoxicity assessment was also conducted to determine the toxicity of AnVE before and after treatment using mung bean (Vigna radiata). The reduction of root length and the weight of mung bean indicated that the sugarcane vinasse contains enormous amounts of organic substances that affect the plant's growth. The toxicity reduction in the AnVE solution can be proved by UV-Vis absorption spectra. Furthermore, the catalyst recovery achieved 93% in the reusability test. However, the COD reduction efficiency and decolourization were reduced every cycle. It was due to the depletion of the active sites in the catalyst with the adsorption of organic molecules. Thus, it can be concluded that the photocatalytic degradation in the treatment of AnVE was effective in organic degradation, decolorization, toxicity reduction and can be reused after the recovery process.

A highly sustainable hydrothermal synthesized MnO2 as cathodic catalyst in solar photocatalytic fuel cell

A unidirectional flow solar photocatalytic fuel cell (PFC) was successfully developed for the first time to offer alternative for electricity generation and simultaneous wastewater treatment. This study was focused on the synthesis of α-, δ- and β-MnO₂ by wet chemical hydrothermal method for application as the cathodic catalyst in PFC. The crystallographic evolution was performed by varying the ratios of KMnO₄ to MnSO₄. The mechanism of the PFC with the MnO₂/C as cathode was also discussed. Results showed that the catalytic activity of MnO₂/C cathode was mainly predominated by their crystallographic structures which included Mn-O bond strength and tunnel size, following order of α- > δ- > β-MnO₂/C. Interestingly, it was discovered that the specific surface areas (S_BET) of different crystal phases did not give an impact on the PFC performance. However, the P_max could be significantly influenced by the micropore surface area (S_micro) in the comparison among α-MnO₂. Furthermore, the morphological transformation carried out by altering the hydrothermal duration demonstrated that the nanowire α-M3(24 h)/C with 1:1 ratio of KMnO₄ and MnSO₄ yielded excellent PFC performance with a P_max of 2.8680 μW cm^-2 and the lowest R_int of 700 Ω.

Novel application of a Z-scheme photocatalyst of Ag3PO4@g-C3N4 for photocatalytic fuel cells

A composite of Ag₃PO₄@g-C₃N₄ with the Z-scheme structure was synthesized, and used as the photoanode in a photocatalytic fuel cell (PFC). With the help of the Z-scheme design, both the degradation of tetracycline and the output of maximum power density (P_max) were greatly enhanced in this PFC system. The degradation rate of tetracycline in the Ag₃PO₄@g-C₃N₄ PFC was 2.53 times and 3.65 times that in the PFC systems with the Ag₃PO₄ photoanode and the g-C₃N₄ photoanode, respectively. The P_max of the Ag₃PO₄@g-C₃N₄ PFC was 6.06 μW cm^-2, which was 1.46 times and 90.4 times that of the Ag₃PO₄ PFC (4.16 μW cm^-2) and the g-C₃N₄ PFC (0.067 μW cm^-2), respectively. The possible mechanism was proposed. The Z-scheme photoanode could not only contribute to the separation of photogenerated carriers to achieve a high photocatalytic activity, but also reserve a good redox capacity. Additionally, aeration played an important role on the PFC performance. It was demonstrated that N₂ purging facilitated the electricity generation, while O₂ purging promoted the pollutant degradation.

Efficient Degradation of Norfloxacin and Simultaneous Electricity Generation in a Persulfate-Photocatalytic Fuel Cell System

Photocatalytic fuel cell (PFC) has been verified to be a promising technique to treat organic matter and recover energy synchronously. Sulfate radicals (SO4·−), as a strong oxidant, have obvious advantages in the degradation of refractory pollutants compared with hydroxyl radicals (·OH), which is the dominant radical in PFC. This study reports a coupling method of PFC and persulfate (PS) activation to promote the degradation of antibiotic norfloxacin (NOR) and simultaneous electricity generation. The added PS as an electron acceptor could be activated by photoelectric effects to produce SO4·− at the electrodes-electrolyte interface. In the solution, PS as supporting electrolyte could accelerate the electron transfer and also be activated by ultraviolet (UV) light irradiation, which could extend the radical oxidation reaction to the whole solution and improve the PFC performance. The performance comparison among different systems indicated the excellent synergistic effect of PFC and PS activation for improving NOR degradation and electricity generation. The effects of influencing factors including initial pH, PS concentration, and initial NOR concentration on the degradation of NOR were investigated extensively to find out the optimal conditions. Moreover, according to the results of radical capture experiments, the significantly contribution of both SO4·− and ·OH to the degradation of NOR was demonstrated and a tentative function mechanism for the NOR degradation in the proposed system was provided. Finally, total organic carbon and real wastewater treatment confirmed the high mineralization and practical applicability of the proposed PFC/PS system.

A synergistic heterostructured ZnO/BaTiO3 loaded carbon photoanode in photocatalytic fuel cell for degradation of Reactive Red 120 and electricity generation

Photocatalytic fuel cell (PFC) is considered as a sustainable green technology which could degrade organic pollutant and generate electricity simultaneously. A synergistic double-sided ZnO/BaTiO₃ loaded carbon plate heterojunction photoanode was fabricated in different ratios by using simple ultrasonication and mixed-annealed method. The double-sided design of photoanode allowed the lights irradiated at both sides of the photoanode. The ferroelectricity fabricated photoanode was applied in a membraneless PFC with platinum-loaded carbon as the cathode. Results revealed that the photoanode with 1:1 ratio of BaTiO₃ and ZnO exhibited a superior photocatalytic activity among all the photoanodes prepared in this study. The heterojunction of this photoanode was able to achieve up to a removal efficiency of 93.67% with a maximum power density of 0.5284 μW cm^-2 in 10 mg L^-1 of Reactive Red 120 (RR120) without any supporting electrolyte. This photoanode was able to maintain at high performance after recycling 3 times. Overloading of ZnO above 50% on BaTiO₃ could lead to deterioration of the performance of PFC due to the charge defects and light trapping ability. The interactions, interesting polarizations of the photocatalysts and proposed mechanism of the n-n type heterojunction in the photoanode of ZnO/BaTiO₃ was also discussed.

Enhancement of simultaneous batik wastewater treatment and electricity generation in photocatalytic fuel cell

The objective of this study was to investigate several operating parameters, such as open circuit, different external resistance, pH, supporting electrolyte, and presence of aeration that might enhance the degradation rate as well as electricity generation of batik wastewater in solar photocatalytic fuel cell (PFC). The optimum degradation of batik wastewater was at pH 9 with external resistor 250 Ω. It was observed that open circuit of PFC showed only 17.2 ± 7.5% of removal efficiency, meanwhile the degradation rate of batik wastewater was enhanced to 31.9 ± 15.0% for closed circuit with external resistor 250 Ω. The decolorization of batik wastewater in the absence of photocatalyst due to the absorption of light irradiation by dye molecules and this process was known as photolysis. The degradation of batik wastewater increased as the external resistor value decreased. In addition, the degradation rate of batik wastewater also increased at pH 9 which was 74.4 ± 34.9% and at pH 3, its degradation rate was reduced to 19.4 ± 8.7%. The presence of aeration and sodium chloride as supporting electrolyte in batik wastewater also affected its degradation and electricity generation. The maximum absorbance of wavelength (λ_max) of batik wastewater at 535 nm and chemical oxygen demand gradually decreased as increased in irradiation time; however, batik wastewater required prolonged irradiation time to fully degrade and mineralize in PFC system.

A highly ordered honeycomb-like nickel(III/II) oxide-enhanced photocatalytic fuel cell for effective degradation of bisphenol A

The honeycomb-like nickel(III/II) oxide interpenetrated framework arrays labelled as H-NiO_x are used as cathode catalysts for the degradation of bisphenol A (BPA) in visible light-excited fuel cells. The nanoparticle close-packed NiO_x aggregates (C-NiO_x) and H-NiO_x are prepared by conventional electrodeposition (ED) and advanced oxidation-associated electrodeposition (AO-ED) strategies, carried out by multiple voltammetry controlled in the potential ranges of 0 to -1.3 V and 1.3 to -1.3 V (vs. SCE), respectively. Compared with C-NiO_x, the H-NiO_x frameworks with smaller charge transfer resistance and higher surface-confined redox-active centers exhibit larger cathode electrocatalytic activity for the photocatalytic degradation of BPA. The NaClO can act as a sacrificial agent to sustain the integrity and stability of H-NiO_x cathode. The H-NiO_x-assisted BPA degradation conditions are optimized by changing process variables. The BPA is degraded by 48.5% within 120 min in photocatalytic BPA (1.0 mmol L^-1, pH 13) fuel cell employing H-NiO_x cathode, CdS/TiO₂ photoanode and 0.2 mol L^-1 NaClO catholyte, and its degradation rate conforms to the first-order reaction kinetic model. The H-NiO_x can remarkably enhance the performances of the photocatalytic fuel cell, achieving a 4.1-fold or 15.2-fold increase in the short circuit current and maximum power density compared with that using bare cathode.

Preparation and photocatalytic activity characterization of activated carbon fiber-BiVO4 composites

Herein, we describe the hydrothermal immobilization of BiVO₄ on activated carbon fibers (ACFs) and characterize the obtained composite by several instrumental techniques, using Reactive Black KN-B (RB5) as a model pollutant for photocatalytic performance evaluation and establishing the experimental conditions yielding maximal photocatalytic activity. The photocatalytic degradation of RB5 is well fitted by a first-order kinetic model, and the good cycling stability and durability of BiVO₄@ACFs highlight the potential applicability of the proposed composite. The enhanced photocatalytic activity of BiVO₄@ACFs compared to those of BiVO₄ and ACFs individually was mechanistically rationalized, and the suggested mechanism was verified by ultraviolet-visible spectroscopy, attenuated total reflectance Fourier-transform infrared spectroscopy, and RB5 degradation experiments. Thus, this work contributes to the development of BiVO₄@ACF composites as effective photocatalysts for environmental remediation applications.

Herein, we describe the hydrothermal immobilization of BiVO₄ on activated carbon fibers, using Reactive Black KN-B photocatalytic performance evaluation and establishing the experimental conditions yielding maximalphotocatalytic activity.

Reactive Black 5 as electron donor and/or electron acceptor in dual chamber of solar photocatalytic fuel cell

The role of azo dye Reactive Black 5 (RB5) as an electron donor and/or electron acceptor could be distinguished in dual chamber of photocatalytic fuel cell (PFC). The introduction of RB5 in anode chamber increased the voltage generation in the system since degradation of RB5 might produce electrons which also would transfer through external circuit to the cathode chamber. The removal efficiency of RB5 with open and closed circuit was 8.5% and 13.6%, respectively and removal efficiency for open circuit was low due to the fact that recombination of electron-hole pairs might happen in anode chamber since without connection to the cathode, electron cannot be transferred. The degradation of RB5 in cathode chamber with absence of oxygen showed that electrons from anode chamber was accepted by dye molecules to break its azo bond. The presence of oxygen in cathode chamber would improve the oxygen reduction rate which occurred at Platinum-loaded carbon (Pt/C) cathode electrode. The V_oc, J_sc and P_max for different condition of ultrapure water at cathode chamber also affected their fill factor. The transportation of protons to cathode chamber through Nafion membrane could decrease the pH of ultrapure water in cathode chamber and undergo hydrogen evolution reaction in the absence of oxygen which then increased degradation rate of RB5 as well as its electricity generation.