Efficient adsorption of Selenium(IV) from water by hematite modified magnetic nanoparticles

Fluorescent composite beads: An advanced tool for environmental monitoring and harmful pollutants removal from water

The quality and safety of water sources have been significantly impacted by various pollutants, including trace elements. To address this concern, this study utilized composite beads made of alginate and carbon quantum dots (CDs) for detecting and removing As(III) and Se(IV) ions in tap water. Fluorescent CDs were hydrothermally synthesized and incorporated into an alginate-Ca2+ matrix through a straightforward procedure. Characterization analyses revealed distinct properties of the composite beads, containing varying amounts of CDs, compared to the pristine beads. Optimal adsorption parameters (30 mg of adsorbent, 10 mg/L of initial pollutant concentration, 35 °C, and 180 min of contact time) for the beads containing 30 w/w-% of CDs (Alg@CDs30) were determined through a fractional factorial design. These composite beads exhibited the highest adsorption capacity for both metals, achieving a removal rate of 94.5% for As(III) and 98.0% for Se(IV) in tap water. Kinetic and isothermal analyses indicated that the adsorption of both metals on Alg@CDs30 involves a combination of chemisorption and diffusion processes. Recycling experiments demonstrated that the composite beads could be reused up to 20 times without a noticeable loss of adsorption efficiency. Regarding the sensing property, our experiments revealed a significant reduction in the fluorescence emission intensity of Alg@CDs30 upon interaction with As(III) and Se(IV), confirming its ability to detect both ions in tap water, with limits of detection (LOD) of 2.6 ± 0.5 μg/L for As(III) and 1.1 ± 0.2 μg/L for Se(IV). The alginate-Ca2+ matrix s contributed to the stability of the CDs' fluorescence. These results confirm the potential of Alg@CDs beads as effective tools for the simultaneous monitoring and removal of hazardous metal ions from real water samples.

A critical review on selenium removal capacity from water using emerging non-conventional biosorbents

Anthropogenic-driven selenium (Se) contamination of natural waters has emerged as severe health and environmental concern. Lowering Se levels to safe limits of 40 μg-L-1 (recommended by WHO) presents a critical challenge for the scientific community, necessitating reliable and effective methods for Se removal. The primary obectives of this review are to evaluate the efficiency of different biosorbents in removing Se, understand the mechanism of adsorption, and identify the factors influencing the biosorption process. A comprehensive literature review is conducted to analyze various studies that have explored the use of modified biochars, iron oxides, and other non-conventional biosorbents for selenium removal. The assessed biosorbents include biomass, microalgae-based, alginate compounds, peats, chitosan, and biochar/modified biochar-based adsorbents. Quantitative data from the selected studies analyzed Se adsorption capacities of biosorbents, were collected considering pH, temperature, and environmental conditions, while highlighting advantages and limitations. The role of iron impregnation in enhancing the biosorption efficiency is investigated, and the mechanisms of Se adsorption on these biosorbents at different pH levels are discussed. A critical literature assessment reveals a robust understanding of the current state of Se biosorption and the effectiveness of non-conventional biosorbents for Se removal, providing crucial information for further research and practical applications in water treatment processes. By understanding the strengths and limitations of various biosorbents, this review is expected to scale-up targeted research on Se removal, promoting the development of innovative and cost-effective adsorbents, efficient and sustainable approaches for Se removal from water.

Elimination of hazardous Se(IV) through adsorption-coupled reduction by iron nanoparticles embedded on mesopores of chitin obtained from waste shrimp shells

Selenium is an essential nutrient for biological function. However, there is a detrimental effect on the aquatic environment associated with higher concentrations of > 40 µg/L. The utilization of waste shrimp shells for the removal of high-concentrated selenium from wastewater is a commendable strategy in both the pollution control and waste management sectors. In the present study, a chitin-iron polymer complex hybrid material (Fe@SHC) was prepared from shrimp shell-derived hydrochar (SHC), and the synthesized composite was successfully employed to uptake selenium from wastewater. The highest removal performance of 79.18 mg/g was attained by Fe@SHC, whereas the capacity of SHC was 15.30 mg/g. It was found that the calcium content of Fe@SHC (1.98%) was lower than that of SHC (25.20%) and pHzpc of Fe@SHC was extended to 7.78 compared with that of SHC (2.00). The abundance of protonated hydroxyl (-OH2+) and amine (-NH3+) functional groups that developed through the iron co-precipitations resulted in the improved adsorption performance of Fe@SHC. XPS analysis demonstrated that the captured Se(IV) species were converted into less hazardous Se(0), which is accompanied by the electron transfer with both N-C = O (acetyl amine) and -NH2 (amine) functional groups. Adsorption kinetics disclosed that the adsorption process was governed by chemical sorption, and the Sips isotherm model provided the most accurate description of the isotherm equilibrium. This study proposed an inexpensive and environmentally friendly method for effective decontamination of Se from wastewater.

Preparation, characterization, bacteriostatic efficacy, and mechanism of zinc/selenium-loaded sodium humate

In recent years, metal-based complexes including selenium (Se) and zinc (Zn)-containing compounds have been widely explored for their therapeutic properties due to their roles in biological processes and modulation of diverse molecular targets. Humic acid, as a metal complexing agent, is also widely used in biomedical field. In this work, three kinds of modified sodium humate (HNa), including Zn-HNA, Se-HNa, and Zn/Se-HNa, were prepared by ion exchange reaction method. The modified HNa was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and elemental mapping. The bacteriostatic activity and mechanism of modified HNa against gram-positive and gram-negative bacteria were investigated by testing bacterial inhibition zone, minimum inhibitory concentration, and capacity to destroy integrity of the bacterial membrane, promoting ROS generation level and prevention of biofilms. FTIR results showed that HNa could combine with zinc ions and selenite ions. The main XRD peaks did not change significantly. In the modified HNa, the particle shape was irregular. Compared to HNa, Zn-HNA, and Se-HNa, Zn/Se-HNa showed the strongest bacteriostatic activity. Zn/Se-HNa exhibited high bacteriostatic activity against gram-negative bacteria (Escherichia coli, Salmonella typhimurium, Klebsiella pneumoniae) and gram-positive bacteria (Staphylococcus aureus), but showed weak antibacterial activity against another gram-positive bacteria, Bacillus subtilis. The bacteriostasis was achieved by altering the permeability of bacterial cell membranes, generating ROS, and preventing the formation of biofilms. In conclusion, Zn/Se-HNa has high bacteriostatic activity, making it a suitable alternative to antibiotics in fields like the treatment of trauma infections and animal husbandry. KEY POINTS: • Preparate and characterize zinc- and selenium-loaded sodium humate (Zn/Se-HNa). • The combination of Zn and Se enhanced the bacteriostatic activity of HNa. • Zn/Se-HNa alters the permeability of bacterial cell membranes and promotes generation of ROS.

A critical analysis of sources, pollution, and remediation of selenium, an emerging contaminant

Selenium (Se) is an essential metalloid and is categorized as emerging anthropogenic contaminant released to the environment. The rise of Se release into the environment has raised concern about its bioaccumulation, toxicity, and potential to cause serious damages to aquatic and terrestrial ecosystem. Therefore, it is extremely important to monitor Se level in environment on a regular basis. Understanding Se release, anthropogenic sources, and environmental behavior is critical for developing an effective Se containment strategy. The ongoing efforts of Se remediation have mostly emphasized monitoring and remediation as an independent topics of research. However, our paper has integrated both by explaining the attributes of monitoring on effective scale followed by a candid review of widespread technological options available with specific focus on Se removal from environmental media. Another novel approach demonstrated in the article is the presentation of an overwhelming evidence of limitations that various researchers are confronted with to overcome achieving effective remediation. Furthermore, we followed a holistic approach to discuss ways to remediate Se for cleaner environment especially related to introducing weak magnetic field for ZVI reactivity enhancement. We linked this phenomenal process to electrokinetics and presented convincing facts in support of Se remediation, which has led to emerge 'membrane technology', as another viable option for remediation. Hence, an interesting, innovative and future oriented review is presented, which will undoubtedly seek attention from global researchers.

New insights into arsenate removal during siderite oxidation by dissolved oxygen

Nowadays, arsenic (As) pollution in aquatic environments severely threatens the health of human beings. Although it has been known that siderite is capable of As adsorption and dissolved oxygen (DO) enhances the adsorption, effects of DO concentrations on As(V) adsorption onto siderite remain elusive. In this study, As(V) removal was investigated by synthesized siderite from aqueous solutions with different DO concentrations. Arsenic(V) adsorption kinetics were conformed to the pseudo-second-order model. As(V) adsorption onto siderite was enhanced in the presence of dissolved oxygen, but the excess DO concentration did not increase As(V) adsorption since Fe(III) oxides were coated onto the pristine siderite surface, preventing the mineral from further oxidation. With the increase in DO concentration, the rate of Fe(II) oxidation decreased, which was the kinetic-limited step during As(V) removal by siderite with the presence of DO. The theoretically generated Fe(III) was stoichiometrically proportional to the consumed oxygen. Microscopic characteristics by means of XRD, SEM, TEM, FTIR and XPS indicated that the adsorption was dominated by the chemical process via the As(V) complexation with siderite and co-precipitation with produced Fe(III) oxides. This study reveals the mechanisms of As(V) adsorption during siderite oxidation under different DO concentrations and emphasizes the importance of siderite oxidation in As(V) fate in aqueous systems.

In situ anchoring of iron and zinc oxides nanoparticles onto rice husk cellulose for efficient wastewater remediation

The development of effective and economical technologies for the treatment of contaminated wastewater has been of great significance to researchers. Therefore, an equal molar ratio of iron and zinc oxides nanoparticles was hydrothermally immobilized on the cellulose fibers of rice husk. Using XRD, SEM, FTIR, EDX, TEM, VSM, BET, and TGA/DTG, the structure, and characteristics of Cel/α-Fe₂O₃-ZnO, a ternary nanocomposite, were affirmed. The nanocomposite displayed a mesoporous structure with a substantial surface area. The efficiency of nanocomposite as a new adsorbent has been studied for the extraction of reactive black 5 (RB5), which is a diazo-anionic dye from simulated wastewater. The medium's pH was the dominant factor of RB5 adsorption, and the optimal removal effectiveness was acquired at pH 2. The adsorption values of RB5 correspond to second-order kinetics. They also matched Langmuir with a maximum capacity of 99.30 mg g^-1. For real industrial wastewater, Cel/α-Fe₂O₃-ZnO has successfully reduced a number of major pollutants, including ammonia (92.73 %), color (92.88 %), COD (91.53 %), BOD₅ (84.97 %), TSS (96.27 %), TP (52.17 %) and TN (47.23 %). These results illustrate the effective application of the ternary nanocomposite in wastewater treatment.

Selenium Oxoanions Removal from Wastewater by MoS42− Intercalated FeMgAl LDH: Catalytic Roles of Fe and Mechanism Insights

FeMgAl−MoS4 LDH was successfully synthesized by a one-pot hydrothermal process followed by ion-exchange methods, and this novel adsorbent was first conducted for aqueous selenite and selenate elimination. The Fe as a component for metal cation layers of LDHs could modulate the layer charge density, leading to more functional groups inserted into layers, and more importantly, this heterogeneous Fe can catalyze the surface reactions between Se(IV) or Se(VI) with S(-II) for oxoanions sequestration. The mechanisms are ion exchange between functional groups with HSeO3− and SeO32− for Se(IV) or SeO42− for Se(VI), followed by reduction by S(-II) from MoS42− groups. The existence of Fe in LDH cation layers, obviously enhanced the reactions (almost two times more for Se(IV) and three times more for Se(VI), respectively), resulting in satisfying adsorption capacities of 483.9 mg/g and 167.2 mg/g for Se(IV) and Se(VI), respectively. Mechanisms were further revealed by elementary analysis, XRD, FT−IR, SEM−EDX, and XPS, as well as the quantitative study. For sorption kinetics, the calculated values of capacities from the pseudo-second-order model are much closer to the experimental values. For sorption isotherms, Langmuir is better than the Freundlich isotherms model for closer capacities (505 mg/g for selenite and 172 mg/g for selenate). All these results demonstrated that the presence of heterogeneous Fe could catalyze the reduction of Se (IV/VI) for the aqueous system, and maybe other high oxidative states hazardous ions. So FeMgAl−MoS4 is a kind of novel adsorbent that offers a promising multi-functional and highly efficient solution for water selenium purification.

Exceptional removal and immobilization of selenium species by bimetal-organic frameworks

Binary metallic organic frameworks can always play excellent functions for pollutants removal. One binary MOFs, UiO-66(Fe/Zr)), was newly synthesized and applied to remove aquatic selenite (SeIV) and selenate (SeVI). The adsorption behaviors and mechanisms were investigated using batch experiments, spectroscopic analyses, and theoretical calculations (DFT). The characterization results showed that the material inherited the topological structure of UiO-66 and excellent thermal stability. The large specific surface area (467.52 m²/g) and uniform mesoporous structures of the synthesized MOFs resulted in fast adsorption efficiency and high adsorption capacity for selenium species. The adsorbent kept high adsorption efficiency in a wide pH range from 2 to 11 with good anti-interference ability. The maximum adsorption capacity for Se(IV) and Se(VI) reached as high as 196 mg/g at pH 3 and 258 mg/g at pH 5, respectively. The process was conformed to fit pseudo-second-order kinetics and Langmuir isotherm, and could be explained by the formation of Fe/Zr-O-Se bond on the material surface, which was interpreted by the results of XPS, FTIR and DFT calculation. The regeneration and TCLP experiments demonstrated that UiO-66(Fe/Zr) could be regenerated for five cycles without obvious decrease of efficiencies, and the leaching rate of the adsorbed Se(IV) and Se(VI) in the spent adsorbent were only 4.8% and 2.3%. More than 99% of original Se(IV) and Se(VI) in the lake and tap water samples (1.0 mg/L of Se) could be removed in 2.0 h.

Rapid adsorption of selenium removal using iron manganese-based micro adsorbent

Selenium in wastewater is of particular concern due to its increasing concentration, high mobility in water, and toxicity to organisms; therefore, this study was carried out to determine the removal efficiency of selenium using iron and manganese-based bimetallic micro-composite adsorbents. The bimetallic micro-composite adsorbent was synthesized by using the chemical reduction method. Micro-particles were characterized by using energy-dispersive X-ray spectroscopy for elemental analysis after adsorption, which confirms the adsorption of selenium on the surface of the micro-composite adsorbent, scanning electron microscopy, which shows particles are circular in shape and irregular in size, Brunauer-Emmett-Teller which results from the total surface area of particles were 59.345m²/g, Zeta particle size, which results from average particles size were 39.8 nm. Then it was applied to remove selenium ions in an aqueous system. The data revealed that the optimum conditions for the highest removal (95.6%) of selenium were observed at pH 8.5, adsorbent dosage of 25 mg, and contact time of 60 min, respectively, with the initial concentration of 1 ppm. The Langmuir and Freundlich isotherm models match the experimental data very well. The results proved that bimetallic micro-composite could be used as an effective selenium adsorbent due to the high adsorption capacity and the short adsorption time needed to achieve equilibrium. Regarding the reusability of bimetallic absorbent, the adsorption and desorption percentages decreased from 50 to 45% and from 56 to 53%, respectively, from the 1st to the 3rd cycle.

Effects of low molecular weight organic acids with different functional groups on arsenate adsorption on birnessite

In an aquatic ecosystem, especially constructed wetlands receiving arsenic (As)-containing wastewater, the fate and mobility of As is influenced by manganese (Mn) oxides and organic matter. Although Mn oxides have been extensively investigated for As(V) adsorption, effects of low molecular weight organic acids (LMWOAs) with different functional groups on As(V) adsorption onto birnessite and underlying mechanisms remain elusive. In this study, LMWOAs with two carboxyl groups (including tartaric (TA), malate (MA), and succinic acids (SA) with two, one and zero hydroxyl groups, respectively) were used. Results showed that more As(V) was adsorbed on birnessite with the presence of LMWOA, indicating that the LMWOA promoted As(V) adsorption via birnessite-carboxyl-As(V) ternary complex. Before birnessite dissolution, TA and MA facilitated As(V) adsorption more efficiently than SA, indicating that hydroxyl group enhanced the coordination among carboxyl groups, As(V) and birnessite. However, within high TA/MA batches, As(V) concentrations decreased sharply and then gradually increased, but Mn(II) concentrations continuously increased, showing the initial reductive dissolution of birnessite promoted As adsorption, while further dissolution was conducive to As mobilization. This study identifies the mechanisms of As adsorption in the presence of LMWOAs and highlights the importance of functional groups in As fate and mobility in aqueous environments.

Soil Respiration of Paddy Soils Were Stimulated by Semiconductor Minerals

Large quantities of semiconductor minerals on soil surfaces have a sensitive photoelectric response. These semiconductor minerals generate photo-electrons and photo-hole pairs that can stimulate soil oxidation-reduction reactions when exposed to sunlight. We speculated that the photocatalysis of semiconductor minerals would affect soil carbon cycles. As the main component of the carbon cycle, soil respiration from paddy soil is often ignored. Five rice cropping areas in China were chosen for soil sampling. Semiconductor minerals were measured, and three main semiconductor minerals including hematile, rutile, and manganosite were identified in the paddy soils. The identified semiconductor minerals consisted of iron, manganese, and titanium oxides. Content of Fe₂O₃, TiO₂, and MnO in the sampled soil was between 4.21-14%, 0.91-2.72%, and 0.02-0.22%, respectively. Most abundant semiconductor mineral was found in the DBDJ rice cropping area in Jilin province, with the highest content of Fe₂O₃ of 14%. Soils from the five main rice cropping areas were also identified as having strong photoelectric response characteristics. The highest photoelectric response was found in the DBDJ rice cropping area in Jilin province with a maximum photocurrent density of 0.48 μA/cm². Soil respiration was monitored under both dark and light (3,000 lux light density) conditions. Soil respiration rates in the five regions were (from highest to lowest): DBDJ > XNDJ > XBDJ > HZSJ > HNSJ. Soil respiration was positively correlated with semiconductor mineral content, and soil respiration was higher under the light treatment than the dark treatment in every rice cropping area. This result suggested that soil respiration was stimulated by semiconductor mineral photocatalysis. This analysis provided indirect evidence of the effect semiconductor mineral photocatalysis has on the carbon cycle within paddy soils, while exploring carbon conversion mechanisms that could provide a new perspective on the soil carbon cycle.

Treatment technologies for selenium contaminated water: A critical review

Selenium is an indispensable trace element for humans and other organisms; however, excessive selenium in water can jeopardize the aquatic environment. Investigations on the biogeochemical cycle of selenium have shown that anthropogenic activities such as mining, refinery, and coal combustion mainly contribute to aquatic selenium pollution, imposing tremendous risks on ecosystems and human beings. Various technologies thus have been developed recently to treat selenium contaminated water to reduce its environmental impacts. This work provides a critical review on the applications, characteristics, and latest developments of current treatment technologies for selenium polluted water. It first outlines the present status of the characteristics, sources, and toxicity of selenium in water. Selenium treatment technologies are then classified into three categories: 1) physicochemical separation including membrane filtration, adsorption, coagulation/precipitation, 2) redox decontamination including chemical reduction and catalysis, and 3) biological transformation including microbial treatment and constructed wetland. Details of these methods including their overall efficiencies, applicability, advantages and drawbacks, and latest developments are systematically analyzed and compared. Although all these methods are promising in treating selenium in water, further studies are still needed to develop sustainable strategies based on existing and new technologies. Perspectives on future research directions are laid out at the end.

Selenium (Se) recovery for technological applications from environmental matrices based on biotic and abiotic mechanisms

Selenium (Se) is an essential element with application in manufacturing from food to medical industries. Water contamination by Se is of concern due to anthropogenic activities. Recently, Se remediation has received increasing attention. Hence, different types of remediation techniques are listed in this work, and their potential for Se recovery is evaluated. Sorption, co-precipitation, coagulation and precipitation are effective for low-cost Se removal. In photocatalytic, zero-valent iron and electrochemical systems, the above mechanisms occur with reduction as an immobilization and detoxification process. In combination with magnetic separation, the above techniques are promising for Se recovery. Biological Se oxyanions reduction has been widely recognized as a cost-effective method for Se remediation, simultaneously generating biosynthetic Se nanoparticles (BioSeNPs). Increasing the extracellular production of BioSeNPs and controlling their morphology will benefit its recovery. However, the mechanism of the microbial production of BioSeNPs is not well understood. Se containing products from both microbial reduction and abiotic methods need to be refined to obtain pure Se. Eco-friendly and cost-effective Se refinery methods need to be developed. Overall, this review offers insight into the necessity of shifting attention from Se remediation to Se recovery.

Sustainable green nanoadsorbents for remediation of pharmaceuticals from water and wastewater: A critical review

In the last three decades, pharmaceutical research has increased tremendously to offer safe and healthy life. However, the high consumption of these harmful drugs has risen devastating impact on ecosystems. Therefore, it is worldwide paramount concern to effectively clean pharmaceuticals contaminated water streams to ensure safer environment and healthier life. Nanotechnology enables to produce new, high-technical material, such as membranes, adsorbent, nano-catalysts, functional surfaces, coverages and reagents for more effective water and wastewater cleanup processes. Nevertheless, nano-sorbent materials are regarded the most appropriate treatment technology for water and wastewater because of their facile application and a large number of adsorbents. Several conventional techniques have been operational for domestic wastewater treatment but are inefficient for pharmaceuticals removal. Alternatively, adsorption techniques have played a pivotal role in water and wastewater treatment for a long, but their rise in attraction is proportional with the continuous emergence of new micropollutants in the aquatic environment and new discoveries of sustainable and low-cost adsorbents. Recently, advancements in adsorption technique for wastewater treatment through nanoadsorbents has greatly increased due to its low production cost, sustainability, better physicochemical properties and high removal performance for pharmaceuticals. Herein, this review critically evaluates the performance of sustainable green nanoadsorbent for the remediation of pharmaceutical pollutants from water. The influential sorption parameters and interaction mechanism are also discussed. Moreover, the future prospects of nanoadsorbents for the remediation of pharmaceuticals are also presented.

Selenium removal from water using adsorbents: A critical review

Selenium (Se) has become an increasingly serious water contamination concern worldwide. It is an essential micronutrient for humans and animals, however, can be extremely toxic if taken in excess. Sorption can be an effective treatment for Se removal from a wide range of water matrices. However, despite the synthesis and application of numerous adsorbents for remediation of aqueous Se, there has been no comprehensive review of the sorption capacities of various natural and synthesized sorbents. Herein, literature from 2010 to 2021 considering Se remediation using 112 adsorbents has been critically reviewed and presented in several comprehensive tables including: clay minerals and waste materials (presented in Table 1); zero-valent iron, iron oxides, and binary iron-based adsorbents (Table 2); other metals-based adsorbents (Table 3); carbon-based adsorbents (Table 4); and other adsorbents (Table 5). Each of these tables, and their relevant sections, summarizes preparation/modification methods, sorption capacities of various Se adsorbents, and proposed model/mechanisms of adsorption. Furthermore, future perspectives have been provided to assist in filling noted research gaps for the development of efficient Se adsorbents for real-world applications. This review will help in preliminary screening of various sorbent media to set up Se treatment technologies for a variety of end-users worldwide.

Speciation analysis of inorganic selenium in wastewater using a highly selective cellulose-based adsorbent via liquid electrode plasma optical emission spectrometry

Speciation of selenium (Se) is typically carried out using a sophisticated technique such as ICP-MS after preconcentration using an adsorbent; however, the separation and preconcentration of inorganic Se has not been realized in the solutions containing high concentrations of SO₄^2-. A dithiocarbamate-modified cellulose (DMC) was used in this study for the selective extraction and preconcentration of inorganic Se in wastewater, with a portable liquid electrode plasma-optical emission spectrometry (LEP-OES) being employed for quantification. DMC was found to selectively and quantitatively adsorb selenite (Se^IV) over a wide range of pH (1.0-8.0); however, less than 3.0% of selenate (Se^VI) was adsorbed in a pH range of 3.0-11. Quantitative extraction of Se^IV was achieved even in the presence of 3.5 mol L^-1 SO₄^2-. The maximum sample volume from which 10 mg of DMC could quantitatively extract Se^IV was found to be 500 mL. KOH (0.60 mL, 1.5 mol L^-1) was found to quantitatively desorb Se^IV retained on the adsorbent and yielded an enrichment factor of 833. The recovery of Se species from synthetic flue-gas desulfurization wastewater containing Se^IV and Se^VI at concentrations of 5.0 µmol L^-1 was 96.2 ± 1.8% and 105.8 ± 1.8%, respectively.

In situ synthesis of a porous ZrO2 coated fiber membrane for efficient static and dynamic removal of Se(iv)

High-performance static and dynamic removal of Se(iv) from environmental water was achieved by using a porous ZrO2 coated fiber membrane.

Magnetic nanoadsorbents for micropollutant removal in real water treatment: a review

Pure water will become a golden resource in the context of the rising pollution, climate change and the recycling economy, calling for advanced purification methods such as the use of nanostructured adsorbents. However, coming up with an ideal nanoadsorbent for micropollutant removal is a real challenge because nanoadsorbents, which demonstrate very good performances at laboratory scale, do not necessarily have suitable properties in in full-scale water purification and wastewater treatment systems. Here, magnetic nanoadsorbents appear promising because they can be easily separated from the slurry phase into a denser sludge phase by applying a magnetic field. Yet, there are only few examples of large-scale use of magnetic adsorbents for water purification and wastewater treatment. Here, we review magnetic nanoadsorbents for the removal of micropollutants, and we explain the integration of magnetic separation in the existing treatment plants. We found that the use of magnetic nanoadsorbents is an effective option in water treatment, but lacks maturity in full-scale water treatment facilities. The concentrations of magnetic nanoadsorbents in final effluents can be controlled by using magnetic separation, thus minimizing the ecotoxicicological impact. Academia and the water industry should better collaborate to integrate magnetic separation in full-scale water purification and wastewater treatment plants.

Facile synthesis of nanosheet-assembled γ-Fe2O3 magnetic microspheres and enhanced Sb(III) removal

The development and utilization of magnetic nanoadsorption materials with large adsorption capacity and easy separation are the research hotspot nowadays. In this study, nanosheet-assembled maghemite (γ-Fe₂O₃) magnetic microspheres were successfully synthesized by an environmental friendly, quick, and simple method, for enhanced Sb(III) removal from aqueous solution. Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), and Brunauer-Emmett-Teller (BET) were used to characterize the material. The results showed that the product contained flower-like γ-Fe₂O₃ microspheres composed of petal-shaped nanosheets interspersed with each other. The specific surface area and pore volume were 69.23 m²/g and 0.15 cm³/g, respectively. The material has a strong magnetic response, which allows rapid solid-liquid separation under the action of an external magnetic field. The effects of different dosages, solution pH, and contact time on the adsorption effect were studied by batch adsorption experiments, and the reusability of the materials was evaluated. Both Freundlich isothermal adsorption model and pseudo-second-order kinetic model were able to describe the uptake of Sb(III). The maximum adsorption capacity of the material was 47.48 mg/g under optimal conditions. The adsorption mechanism is mainly that Sb and lattice oxygen (O_X^2-) form Fe-O-Sb coordination bonds, which is incorporated into the crystal structure of γ-Fe₂O₃ as inner-sphere surface complexes. The synthetic material has the advantage of simple preparation process, good adsorption capacity, operation over a wide range of pH, and easy physical separation from treatment systems with good potential for future application to treat polluted wastewater.

Selenium in wastewater can be adsorbed by modified natural zeolite and reused in vegetable growth

Modified natural zeolites (MNZ) are widely used in pollutant removal, but how to address these MNZ that have adsorbed pollutants must be considered. Selenium is an essential trace element for metabolism and is also a water pollutant. Selenium is adsorbed in the water by MNZ in this study first. Then the Brassica chinensis L. was planted in the soil which contains the MNZ loaded with selenium (MNZ-Se) to explore selenium uptake. MNZ-Se release tests in water and soil were also considered. The results showed the following: (1) The maximum adsorption capacity of MNZ for selenium is 46.90 mg/g. (2) Water release experiments of MNZ-Se showed that regardless of how the pH of the aqueous solution changes, the trend of the release of selenium from MNZ-Se in aqueous solution is not affected and first decreases before stabilizing. (3) Soil release experiments of MNZ-Se showed that the selenium content in the soil increased and reached the concentration in the standard of selenium-rich soil. Addition amount and soil pH value will affect the release ratio. The release ratio of MNZ-Se in the water was higher than that in the soil. (4) With an increase in the soil MNZ-Se content, the selenium content in the soil and B. c increases. Above all, MZN can be a good medium for water pollutant removal and soil improvement.

Exploring the Mechanisms of Selectivity for Environmentally Significant Oxo-Anion Removal during Water Treatment: A Review of Common Competing Oxo-Anions and Tools for Quantifying Selective Adsorption

Development of novel adsorbents often neglects the competitive adsorption between co-occurring oxo-anions, overestimating realistic pollutant removal potentials, and overlooking the need to improve selectivity of materials. This critical review focuses on adsorptive competition between commonly co-occurring oxo-anions in water and mechanistic approaches for the design and development of selective adsorbents. Six "target" oxo-anion pollutants (arsenate, arsenite, selenate, selenite, chromate, and perchlorate) were selected for study. Five "competing" co-occurring oxo-anions (phosphate, sulfate, bicarbonate, silicate, and nitrate) were selected due to their potential to compete with target oxo-anions for sorption sites resulting in decreased removal of the target oxo-anions. First, a comprehensive review of competition between target and competitor oxo-anions to sorb on commonly used, nonselective, metal (hydr)oxide materials is presented, and the strength of competition between each target and competitive oxo-anion pair is classified. This is followed by a critical discussion of the different equations and models used to quantify selectivity. Next, four mechanisms that have been successfully utilized in the development of selective adsorbents are reviewed: variation in surface complexation, Lewis acid/base hardness, steric hindrance, and electrostatic interactions. For each mechanism, the oxo-anions, both target and competitors, are ranked in terms of adsorptive attraction and technologies that exploit this mechanism are reviewed. Third, given the significant effort to evaluate these systems empirically, the potential to use computational quantum techniques, such as density functional theory (DFT), for modeling and prediction is explored. Finally, areas within the field of selective adsorption requiring further research are detailed with guidance on priorities for screening and defining selective adsorbents.

Synthesis of Fe-impregnated biochar from food waste for Selenium(Ⅵ) removal from aqueous solution through adsorption: Process optimization and assessment

Iron-impregnated food waste biochar (Fe-FWB) was synthesized for Se(Ⅵ) removal from aqueous solution. The effect and interactive effects of different parameters including pyrolysis time, temperature, and Fe concentration were explored using response surface methodology (RSM) to enhance conditions to achieve the highest Se(Ⅵ) removal using Fe-FWB. Pyrolysis time was not significant for Se(Ⅵ) adsorption capacity of Fe-FWB, but temperature and Fe concentration were found to be significant. The highest adsorption was achieved at 3.47 h and 495.0 °C with an Fe concentration of 0.44 M. Fe-FWB synthesized under optimum conditions were used to investigate the kinetic, equilibrium, and thermodynamic adsorption of Se(Ⅵ). Se(Ⅵ) adsorption reached equilibrium within 6 h, and both pseudo-second order and pseudo-first order models were suitable for describing kinetic Se(Ⅵ) adsorption. The Freundlich model was found to suitably fit the equilibrium adsorption data than the Langmuir model. The highest adsorption capacity of Fe-FWB for Se(Ⅵ) was 11.7 mg g^-1. Se(Ⅵ) adsorption on Fe-FWB was endothermic and spontaneous. The enthalpy change for Se(Ⅵ) adsorption was 54.4 kJ mol^-1, and the entropy change was negative at 15-35 °C. The increment of solution pH from 3 to 11 decreased the Se(Ⅵ) adsorption from 19.2 to 7.4 mg g^-1. The impact of interfering anions on Se(Ⅵ) adsorption followed the lineup: HCO₃^- > HPO₄^2- > SO₄^2- > NO₃^-. When compared to some adsorbents, the adsorption capacity of Se(Ⅵ) onto Fe-FWB was comparable even at neutral pH and the Fe-FWB was granular. These results indicate that Fe-FWB has prospective application in the removal of Se(Ⅵ) from aqueous solutions.

Adsorptive Removal of Se(IV) by Citrus Peels: Effect of Adsorbent Entrapment in Calcium Alginate Beads

Selenium (Se) contamination in natural waters impacted by anthropogenic activities is becoming a prevalent and widespread problem. Investigation of novel, low-cost, and sustainable food-waste-sourced adsorbents for Se removal has largely been unexplored. Here, we report on the Se(IV) biosorption from a liquid solution using three waste-derived/low-cost biosorbents, namely citrus peels (bare), Ca-alginate gel beads, and Ca-alginate-citrus peels composite beads (Ca-alginate@citrus). The entrapment of citrus peels by Ca-alginate not only provided a structural framework for the citrus peel particles but also preserved the high-efficiency Se(IV) removal property of the citrus peels. From the modeling results, it was established that Se(IV) biosorption followed the fixed-film diffusion model, along with pseudo-second-order kinetics. Investigation of pH impacts along with initial dosing of sorbent/sorbate demonstrated that all of the three biosorbents exhibited optimum biosorption of Se(IV) at pH 6-8, 50-75 mg·L^-1 of Se(IV), and 1-5 mg·L^-1 of biosorbent. Overall, the maximum Se(IV) biosorption capacities were measured to be 116.2, 72.1, and 111.9 mg·g^-1 for citrus peels, Ca-alginate, and Ca-alginate@citrus, respectively, with citrus peels (bare and immobilized) showing among the highest reported values in the literature for Se(IV) adsorption. This work provides a platform for the future development of an efficient filtration system using Ca-alginate@citrus as an inexpensive, novel, and sustainable biosorbent to treat Se(IV) contaminated water.

Unified View of Magnetic Nanoparticle Separation under Magnetophoresis

The migration process of magnetic nanoparticles and colloids in solution under the influence of magnetic field gradients, which is also known as magnetophoresis, is an essential step in the separation technology used in various biomedical and engineering applications. Many works have demonstrated that in specific situations, separation can be performed easily with the weak magnetic field gradients created by permanent magnets, a process known as low-gradient magnetic separation (LGMS). Due to the level of complexity involved, it is not possible to understand the observed kinetics of LGMS within the classical view of magnetophoresis. Our experimental and theoretical investigations in the last years unravelled the existence of two novel physical effects that speed up the magnetophoresis kinetics and explain the observed feasibility of LGMS. Those two effects are (i) cooperative magnetophoresis (due to the cooperative motion of strongly interacting particles) and (ii) magnetophoresis-induced convection (fluid dynamics instability originating from inhomogeneous magnetic gradients). In this feature article, we present a unified view of magnetophoresis based on the extensive research done on these effects. We present the physical basis of each effect and also propose a classification of magnetophoresis into four distinct regimes. This classification is based on the range of values of two dimensionless quantities, namely, aggregation parameter N* and magnetic Grashof number Gr_m, which include all of the dependency of LGMS on various physical parameters (such as particle properties, thermodynamic parameters, fluid properties, and magnetic field properties). This analysis provides a holistic view of the classification of transport mechanisms in LGMS, which could be particularly useful in the design of magnetic separators for engineering applications.

Techno-Economic Evaluation of Iron and Aluminum Coagulants on Se(IV) Removal

Research on selenium pollution in natural waters is continuous and discouraging. In this study, coagulation/precipitation was applied with the use of Fe(II), Fe(III), and poly-aluminum chloride (PACl) salts for Se(IV) removal at concentration range 10–100 μg Se(IV)/L that is commonly found in drinking waters. Prehydrolyzed Fe(III)-FeCl3 delivered the best uptake capacity (Q10 = 8.9 mg Se(IV)/g Fe(III) at pH 6) at the residual concentration equal to the drinking water regulation limit of 10 μg/L. This was much higher than the efficiencies achieved when applying the other coagulants: i.e., Q10 = 7.3 mg Se(IV)/g Fe3+-FeClSO4, Q10 = 6.4 mg Se(IV)/g prehydrolyzed Fe(III)-Fe2(SO4)3 and 0.7 mg Se(IV)/g Al-PACl at pH 6, and Q10 = 0.45 mg Se(IV)/g Fe(II) at pH 7.2. Comparing the different sources of Fe(III), it is apparent that Se(IV) uptake capacity is inhibited by the presence of SO42− in crystal structure of prehydrolyzed Fe2(SO4)3, while prehydrolyzed FeCl3 favors Se(IV) uptake. Temperature effect data showed that coagulation/precipitation is exothermic. In techno-economic terms, the optimal conditions for Se(IV) removal are coagulation/precipitation at pH values lower than 7 using prehydrolyzed Fe(III)-FeCl3, which provides a combination of minimum sludge production and lower operating cost.

Promotional effect of Mn(II)/K2FeO4 applying onto Se(IV) removal

Promotional effect of Mn(II)/K₂FeO₄ [Fe(VI)] applying onto Se(IV) removal was determined for the first time, with description of reaction mechanisms. Four different combinations of water treatment agents [K₂FeO₄ alone, K₂FeO₄ with Al(III) ions, K₂FeO₄ with Fe(III) ions, and K₂FeO₄ with Mn(II) ions] were used for Se removal in spiked deionized water, and K₂FeO₄ in combination with Mn(II) ions showed great removal efficiency. Over 90% of Se(IV) (200 μg/L) was removed within 2 min by using 1 mg/L of K₂FeO₄ and 9 mg/L of Mn(II) ions (pH 7.0, 23 °C). XPS analysis identified that in the reaction process, Se(0) formed on the settlement. It was speculated that Se(IV) was oxidized to Se(VI) by K₂FeO₄, and the Se(VI) species was reduced to insoluble Se(0) by γ-Fe₂O₃-Mn(II) nanocomplex. Insoluble Se(0) adsorbed on the surface of Fe-Mn particle and coprecipitated, thus removed from aqueous solution. As solution pH varied from 4.0 to 8.0, Se(IV) removal ratio ranged from 89% to 98% in the system. Co-existing ions such as Na⁺, Ca²⁺ and SO₄^2- had no intense effect on Se removal, while PO₄^3- and humic acid (HA) inhibited Se removal in Mn(II)/K₂FeO₄ system. Mn(II)/K₂FeO₄ was an effective and convenient way for Se(IV) removal from polluted water.

Se(IV) oxidation by ferrate(VI) and subsequent in-situ removal of selenium species with the reduction products of ferrate(VI): performance and mechanism

In order to treat selenium pollution, the study presents the use of potassium ferrate (K₂FeO₄) as an environmentally friendly agent for in situ removal of Se(IV) from aqueous media. Batch experiments were carried out to evaluate the influences of various factors including dosage of K₂FeO₄, ex-situ and in-situ adsorption, initial pH, and adsorption isotherms. The results showed that increasing dosage of K₂FeO₄ benefited the removal of total selenium with the efficiency up to 97.0% and Se(IV) removal significantly depended on pH, and as the pH increases, the decrease in Se(IV) adsorption efficiency is a general trend of pH dependence. The X-ray powder diffraction, Fourier transformed infrared spectrometer and high-resolution X-ray photoelectron spectroscopy analysis indicated that Se(IV) was removed from the aqueous solution by adsorbing on the surface of the decomposition products of K₂FeO₄ which are ferric oxide nanoparticles, and the selenium adsorbed on the generated ferric oxide nanoparticles existed in the forms of Se(IV) and Se(VI). Se(IV) and Se(VI) were adsorbed to the decomposition products of K₂FeO₄ by forming an inner-sphere complexes and an outer-sphere complexes, respectively.

Impact of low-molecular weight organic acids on selenite immobilization by goethite: Understanding a competitive-synergistic coupling effect and speciation transformation

The interactions between low-molecular weight organic acids (LMWOAs) and selenium (Se) on mineral/water interfaces affect the release, immobilization and bioavailability of Se in nature. Herein, the effects of three environmentally relevant LMWOAs (i.e., oxalic (Oxa), succinic (Suc) and citric (Cit) acids) on Se(IV) adsorption to goethite under oxic conditions were investigated using batch experiments, speciation fractionation, and ATR-FTIR and XPS analyses. The LMWOAs exhibited a competitive-synergistic coupling effect on Se(IV) adsorption to goethite, which inhibited the adsorption rate of Se(IV) by 14.1, 13.3 and 8.0 times. However, immobilization of Se(IV) was simultaneously enhanced by 39.1%, 34.6% and 14.1% in the following order Oxa > Suc > Cit. The results obtained by fractionation of the adsorbed Se(IV) revealed that the enhancement was due to surface binding as well as speciation transformation from ligand-exchangeable Se(IV) into residual fractions, which increased by approximately 18% in the presence of the LMWOAs. The dissolution of goethite significantly improved due to the LMWOAs and decreased to different degrees as the concentration of Se(IV) increased. The monodentate mononuclear complexes (58.2%) and Lewis base sites bonded Se (41.8%) were the predominant surface species of Se(IV) in goethite-Se(IV) system. The ATR-FTIR and high-resolution XPS analyses demonstrated that the formation of ≡FeO(SeO)O-CO surface complexes (22.8-27.0%) occurred in the presence of LMWOAs, which could be closely correlated with the interface-mediated reduction of Se(IV). In addition, the predominant mechanism for the formation of residual Se is LMWOA specific, in which ferric selenite-like precipitation was dominant for Suc (10.6%) and Cit (11.6%) and reduction was dominant for Oxa (17.5%). Overall, LMWOAs play an important role in Se(IV) immobilization and speciation transformation and may facilitate understanding the Se bioavailability in rhizosphere soils under oxic conditions.

Preparation of Micro-Nano Material Composed of Oyster Shell/Fe3O4 Nanoparticles/Humic Acid and Its Application in Selective Removal of Hg(II)

Micro-nano composite material was prepared to adsorb Hg(II) ions via the co-precipitation method. Oyster shell (OS), Fe3O4 nanoparticles, and humic acid (HA) were used as the raw materials. The adhesion of nanoparticles to OS displayed by scanning electron microscopy (SEM), the appearance of the (311) plane of standard Fe3O4 derived from X-ray diffraction (XRD), and the transformation of pore sizes to 50 nm and 20 μm by mercury intrusion porosimetry (MIP) jointly revealed the successful grafting of HA-functionalized Fe3O4 onto the oyster shell surface. The vibrating sample magnetometer (VSM) results showed superparamagnetic properties of the novel adsorbent. The adsorption mechanism was investigated based on X-ray photoelectron spectroscopy (XPS) techniques, which showed the process of physicochemical adsorption while mercury was adsorbed as Hg(II). The effects of pH (3-7), initial solution concentration (2.5-30 mg·L-1), and contact time (0-5 h) on the adsorption of Hg(II) ions were studied in detail. The experimental data were well fitted to the Langmuir isotherm equation (R2 = 0.991) and were shown to follow a pseudo-second-order reaction model (R2 = 0.998). The maximum adsorption capacity of Hg(II) was shown to be 141.57 mg·g-1. In addition, this new adsorbent exhibited excellent selectivity.

Toward Realizing Multifunctionality: Photoactive and Selective Adsorbents for the Removal of Inorganics in Water Treatment

Persistent and potentially toxic inorganic oxoanions (e.g., arsenic and selenium) are one class of contaminants of concern in drinking water for which treatment technologies must be improved. Effective removal of these oxoanions is made difficult by the varying adsorption affinity of the different oxidation states, as well as the presence of background ions with similar chemical structure and behavior that strongly compete for adsorption sites, greatly reducing removal efficiencies. Recent studies pointing to the negative health effects of inorganic oxoanion contaminants have resulted or are expected to result in new regulations lowering their allowable maximum concentration level (MCL) in drinking water. While these regulations are intended to protect human and environmental health, they must also allow for balanced economic costs. As such, the MCLs are often set at levels that are not as health protective due to high treatment costs that continue to present a significant challenge for small (500-3300 people) to very small (25-500 people) communities. In this Account, we focus on the development of novel cost-effective, sustainable, and efficient multifunctional and selective adsorbents that offer solutions to the above challenges through two platforms: nanoenabled and transition-metal cross-linked chitosan (TMCC) and crystal facet engineered nanometal oxides (NMO). These complementary platforms offer treatment solutions at different scales and flow rates (e.g., in a point-of-use device versus a small-scale community system). Multifunctional adsorbents combine processes that traditionally require multiple steps offering the potential for reducing treatment time and costs. Development of selective adsorbents can greatly increase removal efficiencies of target contaminants by either promoting their adsorption or hindering adsorption of competitive ions. The following sections describe (1) synthesis of novel nanoenabled waste sourced bioadsorbents; (2) development of multifunctional adsorbents to simultaneously photo-oxidize arsenite and adsorb arsenate; (3) development of a selective adsorbent for removal of arsenate and selenite over phosphate; (4) investigations of the conventional wisdom that increased surface area yields increased oxoanion removal using selenium sorption on nanohematite as a case study; and (5) crystal engineering of nanohematite to promote selenite adsorption. The novel technologies developed through these research efforts can serve as templates for the creation of future adsorbents tailored for use targeting other oxoanion contaminants of interest.

High-quality Al@Fe-MOF prepared using Fe-MOF as a micro-reactor to improve adsorption performance for selenite

High-quality Al@Fe-MOF was prepared by in situ modification of Fe-MOF with Al³⁺ to improve the adsorption performance for selenite (Se(Ⅳ)). The structures and properties of Al@Fe-MOF were characterized by powder X-ray diffraction, high resolution transmission electron microscope, X-ray photoelectron spectroscopy (XPS), nitrogen isothermal adsorption-desorption measurement and zeta potential. The adsorption performance of Al@Fe-MOF for Se(Ⅳ) was studied by batch adsorption experiments. A large number of pores in Al@Fe-MOF were filled by AlOOH and some bayerite formed on the surfaces. Compared with those of Fe-MOF, the specific surface area (SSA) and microporosity of Al@Fe-MOF decreased to 1368 m²/g and 38.5%, respectively. Hydrolysis occurred at pH > 5.0 for Fe-MOF, but did not for Al@Fe-MOF at the pH range of 3.0-7.0. Compared with in Fe-MOF, the adsorption capacity and efficiency of SSA for Se(Ⅳ) were increased by 77% and 112%, and the average free energy of adsorption was increased to 11.62 kJ/mol in Al@Fe-MOF. Besides, the Se(Ⅳ) adsorption amount of Al@Fe-MOF was almost not influenced by the pH from 3.0 to 7.0. The high resolution XPS (HR-XPS) and pH analysis indicated that Al species in Al@Fe-MOF could significantly increase the density of adsorption sites to improve its adsorption capacity for Se(Ⅳ).

Magnetic Properties of Nanocomposites

The magnetic properties of various families of nanocomposite materials containing nanoparticles of transition metals or transition-metal compounds are reviewed here. The investigated magnetic nanocomposites include materials produced either by dissolving a ferrofluid containing pre-formed nanoparticles of desired composition and size in a fluid resin submitted to subsequent curing treatment, or by generating the nanoparticles during the very synthesis of the embedding matrix. Two typical examples of these production methods are polymer nanocomposites and ceramic nanocomposites. The resulting magnetic properties turn out to be markedly different in these two classes of nanomaterials. The control of nanoparticle size, distribution, and aggregation degree is easier in polymer nanocomposites, where the interparticle interactions can either be minimized or exploited to create magnetic mesostructures characterized by anisotropic magnetic properties; the ensuing applications of polymer nanocomposites as sensors and in devices for Information and Communication Technologies (ICT) are highlighted. On the other hand, ceramic nanocomposites obtained from transition-metal loaded zeolite precursors exhibit a remarkably complex magnetic behavior originating from the simultaneous presence of zerovalent transition-metal nanoparticles and transition-metal ions dissolved in the matrix; the applications of these nanocomposites in biomedicine and for pollutant remediation are briefly discussed.

Efficient Adsorption of Pb(II) from Aqueous Solutions by Metal Organic Framework (Zn-BDC) Coated Magnetic Montmorillonite

Composite adsorption materials combine the advantages of various adsorptive materials and compensate for the defects of single adsorbents. Magnetic montmorillonite (MMMT) shows good adsorption properties for Pb(II). In order to further improve the adsorption properties of MMMT, in this work, Zn-BDC, a kind of metal⁻organic framework (MOF), was modified onto the surface of MMMT by in situ polymerization. The composite material MMMT@Zn-BDC was characterized by Zetasizer, SEM, TEM, FTIR, XRD, VSM, and XPS. The influence of adsorption conditions on the adsorption capacity of MMMT@Zn-BDC for Pb(II) was examined, including the adsorbent dosage, pH of Pb(II) solution, initial concentration of Pb(II), and the temperature and adsorption time. Also, the adsorption mechanism was studied. The results of this study show that MMMT@Zn-BDC adsorbs Pb(II) via chemisorption. In addition, MMMT@Zn-BDC exhibits good potential for adsorbing Pb(II), including its high adsorption capacity (724.64 mg/g) and good recyclability.