Levels, sources, and potential human health risks of PCNs, PCDD/Fs, and PCBs in an industrial area of Shandong Province, China

Assessment of polychlorinated naphthalenes in Korean foods: Levels, profiles, and dietary intake

Concerns about dioxin-like compounds have increased; however, the monitoring of polychlorinated naphthalenes (PCNs) in food and the assessment of dietary intake remain limited. In this study, various foods were collected from Korean markets and analyzed for PCNs. Fishery products exhibited the highest mean concentration (48.0 pg/g ww) and toxic equivalent (TEQ) (0.0185 pg-TEQ/g ww). Agricultural products were the largest contributors (35.7%) to the total dietary intake of PCNTEQ, followed by livestock products (33.6%), fishery products (20.2%), and processed foods (10.5%). The mean intake of PCNTEQ for the Korean population was 0.901 pg-TEQ/day for males and 0.601 pg-TEQ/day for females. Generally, males and younger groups had higher daily intakes of PCNTEQ, but they did not exceed the tolerable weekly intakes. Nonetheless, it is important to manage potential health risks associated with PCNs and other dioxin-like compounds by identifying major food items contributing to PCN exposure and considering age and gender differences.

Spatial distributions, behaviors, and sources of PCDD/Fs in surface water and sediment from the Yangtze River Delta

The Yangtze River Delta (YRD), one of the most economically developed and industrialized regions in China, is confronted with challenges arising from rapid urbanization, particularly environmental pollution. The collection of surface water and sediment samples from forty-nine sites in the YRD was conducted to analyze 2378-substituted polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) congeners. The detected concentrations of PCDD/Fs were 0-5.3 pg TEQ/L in water and 0.12-1493 pg TEQ/g dw in sediment. The PCDD/Fs contamination in the sediment was widespread in the YRD. There were variations in the congener characteristics of PCDD/Fs in surface water and sediment. The proportion of OCDD was significantly lower in surface water samples compared to sediment, while the less chlorine-substituted homologs were found in larger proportions. To understand the partitioning and behavior of dioxins within the water-sediment system, we calculated the organic carbon normalized partition coefficients and fugacity fraction (ff) of PCDD/F congeners. The results revealed that the PCDD/Fs had not attained a state of distributional equilibrium, and the non-specific hydrophobic effect seemed minimally influential on their partitioning between sediment and water. The average ff values, which varied between 0.06 and 0.63, indicated differing migration directions for the PCDD/F congeners. Source identification analysis provided evidence that the dioxins in the river water were primarily attributed to industrial thermal processes. Iron and steel smelting, along with pesticide production and use, were likely responsible for the sediment contamination. This comprehensive analysis underscores the complex nature of PCDD/Fs pollution in the YRD and highlights the necessity for targeted environmental management strategies.

Health assessment of emerging persistent organic pollutants (POPs) in PM2.5 in northern and central Taiwan

Over the last two decades, Taiwan has effectively diminished atmospheric concentrations of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) through the adept utilization of advanced technologies and the implementation of air pollution control devices. Despite this success, there exists a dearth of data regarding the levels of other PM2.5-bound organic pollutants and their associated health risks. To address this gap, our study comprehensively investigates the spatial and seasonal variations, potential sources, and health risks of PCDD/Fs, Polychlorinated biphenyls (PCBs), and Polychlorinated naphthalene (PCNs) in Northern and Central Taiwan. Sampling collections were conducted at three specific locations, including six municipal waste incinerators in Northern Taiwan, as well as a traffic and an industrial site in Central Taiwan. As a result, the highest mean values of PM2.5 (20.3-39.6 μg/m3) were observed at traffic sites, followed by industrial sites (14.4-39.3 μg/m3), and the vicinity of the municipal waste incinerator (12.4-29.4 μg/m3). Additionally, PCDD/Fs and PCBs exhibited discernible seasonal fluctuations, displaying higher concentrations in winter (7.53-11.9 and 0.09-0.12 fg I-TEQWHO/m3) and spring (7.02-13.7 and 0.11-0.16 fg I-TEQWHO/m3) compared to summer and autumn. Conversely, PCNs displayed no significant seasonal variations, with peak values observed in winter (0.05-0.10 fg I-TEQWHO/m3) and spring (0.03-0.08 fg I-TEQWHO/m3). Utilizing a Positive Matrix Factorization (PMF) model, sintering plants emerged as the predominant contributors to PCDD/Fs, constituting 77.9% of emissions. Woodchip boilers (68.3%) and municipal waste incinerators (21.0%) were identified as primary contributors to PCBs, while municipal waste incinerators (64.6%) along with a secondary copper and a copper sludge smelter (22.1%) were the principal sources of PCNs. Moreover, the study specified that individuals aged 19-70 in Northern Taiwan and those under the age of 12 years in Central Taiwan were found to have a significantly higher cancer risk, with values ranging from 9.26 x 10-9-1.12 x 10-7 and from 2.50 x 10-8-2.08 x 10-7respectively.

Concentration and sources of persistent organic pollutants within the vicinity of a scrap-iron smelting plant: Seasonal pattern and health risk assessment

Polychlorinated biphenyls (PCBs) are a class of ubiquitous and significant synthetic organic chemicals that pose deleterious threats to the environment and human health. This study examined the concentration, indoor-outdoor and seasonal change, sources, and health effects of PCBs in particulate-bound dust near a scrap iron recycling plant. PCBs levels were determined in samples using gas chromatograph mass spectrometer. The results indicated that 5 Cl atoms PCB constituted the majority of PCBs (41% overall), contributing 43% during the rainy season and 39% during the dry season. Dioxin-like PCBs (DLPCBs) contributed 38% during the rainy season and 33% during the dry season. In addition, DLPCB accounted for 26% and 40% of indoor and outdoor PCB emissions, respectively. Iron and steel production were identified as the highest identified contributing sources, accounting for 76% of PCB emissions in the rainy season, while plastic combustion had the highest contribution in the dry season, accounting for 44% of PCB emissions. Incremental Lifetime Cancer Risk assessment showed ingestion as the main exposure pathway for children and adults during the two seasons (74.42% and 58.24%, respectively), followed by dermal exposure, while inhalation had the least contribution. A multifaced approach involving relevant agencies, the industry, and the community is required to reduce exposure.

Spatial and temporal trends in polychlorinated naphthalenes in sediment from Ulsan and Onsan Bays of Korea: Potential sources and ecotoxicological concerns

Few studies have been conducted on spatial and temporal trends in polychlorinated naphthalenes (PCNs) in coastal environments. Here, we describe 18 PCN congeners found in surface and dated sediment samples collected from highly industrialized bays of Korea. Measurable levels of PCN congeners were detected in all sediment samples, suggesting concurrent and historical contamination. The highest PCN concentrations were observed in sediment from rivers, streams, and the inner portions of the bays, which are surrounded by industrial complexes and commercial harbors. CNs 73, 66/67, and 52 were dominant in surface and dated sediment samples. Congener patterns and diagnostic ratios revealed that PCN contamination is originated from combustion processes and the use of polychlorinated biphenyl (PCB) technical mixtures. PCN concentrations in dated sediment increased from the 1980s to the mid-2000s and then decreased to 2015. Although the toxic equivalent (TEQ) levels of PCNs in our study did not exceed sediment quality guidelines proposed by international authorities, the cumulative risks from the TEQ concentrations of polychlorinated dibenzo-p-dioxins, furans, PCBs, and PCNs can be expected for benthic organisms.

Developing an Improved Strategy for the Analysis of Polychlorinated Dibenzo-p-Dioxins/Furans and Dioxin-like Polychlorinated Biphenyls in Contaminated Soils Using a Combination of a One-Step Cleanup Method and Gas Chromatography with Triple Quadrupole Mass Spectrometry

Soils contaminated with polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs), and dioxin-like (dl) polychlorinated biphenyls (PCBs), known as persistent organic pollutants (POPs), have garnered global attention because of their toxicity and persistence in the environment. The standard method for target analytes has been used; however, it is an obstacle in large-scale sample analysis due to the comprehensive sample preparation and high-cost instrumental analysis. Thus, analytical development of inexpensive methods with lower barriers to determine PCDDs/Fs and dl-PCBs in soil is needed. In this study, a one-step cleanup method was developed and validated by combining a multilayer silica gel column and Florisil micro-column followed by gas chromatography with triple quadrupole mass spectrometry (GC-QqQ-MS/MS). To optimize the separation and quantification of 17 PCDDs/Fs and 12 dl-PCBs in soils, the sample cleanup and instrumental conditions were investigated. For quantification method validation, spiking experiments were conducted to determine the linearity of the calibration, recovery, and method detection limit of PCDDs/Fs and dl-PCBs using isotopic dilution GC-QqQ-MS/MS. The applicability of the simultaneous determination of PCDDs/Fs and dl-PCBs was confirmed by the recovery of native target congeners and labeled surrogate congeners spiked into the quality-control and actual soil samples. The results were in good agreement with the requirements imposed by standard methods. The findings in this work demonstrated the high accessibility of the sample cleanup and analysis methods for the efficient determination of PCDDs/Fs and dl-PCBs in contaminated soils.

PCDD/F and DL-PCB exposure among residents upwind and downwind of municipal solid waste incinerators and source identification

Understanding the environmental and human impacts associated with polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) exposure from municipal solid waste incinerators (MSWIs) is challenging because information on ambient and dietary exposure levels, spatial characteristics, and potential exposure routes is limited. In this study, 20 households from two villages located on the upwind and downwind sides of a MSWI were selected to characterize the concentration and spatial distribution of PCDD/F and DL-PCB compounds in ambient and food samples, such as dust, air, soil, chicken, egg, and rice samples. The source of exposure was identified using congener profiles and principal component analysis. Overall, the dust and rice samples had the highest and lowest mean dioxin concentrations, respectively. Significant differences were observed (p < 0.01) in PCDD/F concentrations in chicken samples and DL-PCB concentrations in rice and air samples between the upwind and downwind villages. The exposure assessment indicated that the primary risk source was dietary exposure, especially from eggs, which had a PCDD/F toxic equivalency (TEQ) range of 0.31-14.38 pg TEQ/kg body weight (bw)/day, leading to adults in one household and children in two households exceeding the World Health Organization-defined threshold of 4 pg TEQ/kg bw/day. Chicken was the main contributor to the differences between upwind and downwind exposure. Based on the established congener profiles, the exposure routes of PCDD/Fs and DL-PCBs from the environment to food to humans were clarified.

PCBs, PCNs, and PCDD/Fs in Soil around an Industrial Park in Northwest China: Levels, Source Apportionment, and Human Health Risk

The concentrations of polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were determined in soil samples collected around an industrial park in Northwest China, to investigate the potential impacts of park emissions on the surrounding environment. The total concentration ranges of PCBs, PCNs, and PCDD/Fs in the soil samples were in 13.2-1240, 141-832, and 3.60-156 pg/g, respectively. The spatial distribution and congener patterns of PCBs, PCNs, and PCCD/Fs indicated that there might be multiple contamination sources in the study area, so source apportionments of PCBs, PCNs, and PCCD/Fs were performed by a positive matrix factorization model based on the concentrations of all target congeners together. The results revealed that these highly chlorinated congeners (CB-209, CN-75, and OCDF) might be derived from phthalocyanine pigments, the legacy of Halowax 1051 and 2,4-D products, which together contributed nearly half of the total concentration of target compounds (44.5%). In addition to highly chlorinated congeners, the local industrial thermal processes were mainly responsible for the contamination of PCBs, PCNs, and PCDD/Fs in the surrounding soil. The total carcinogenic risk of PCBs, PCNs, and PCDD/Fs in a few soil samples (0.22 × 10-6, 0.32 × 10-6, and 0.40 × 10-6) approached the threshold of potential carcinogenic risk (1.0 × 10-6). Since these pollutants can continuously accumulate in the soil, the contamination of PCBs, PCNs, and PCDD/Fs in surrounding soil deserves continuous attention.

PCNs, PCBs, and PCDD/Fs in Soil around a Cement Kiln Co-Processing Municipal Wastes in Northwestern China: Levels, Distribution, and Potential Human Health Risks

To evaluate the impact of the first cement kiln co-processing municipal wastes in northwest China on the surrounding environment, the concentrations of polychlorinated naphthalenes (PCNs), polychlorinated biphenyls (PCBs), and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were determined in 17 soil samples collected around the plant. The concentration ranges of PCNs, PCBs, and PCDD/Fs were 132-1288, 10.8-59.5, and 2.50-5.95 pg/g, and the ranges of toxic equivalents (TEQ) were 1.98-20.8, 2.36-48.0, and 73.2-418 fg/g, respectively. The concentrations of PCNs, PCBs, and PCDD/Fs in this study were generally lower than those in soil around municipal waste incinerators and industrial parks in other areas. An exponential function equation was applied for the relationship between the concentration of the target compounds and the distance from the cement kiln stack, the results showed that PCN and PCB concentrations declined with the increasing of distance from the stack. Furthermore, it was found that the effect of the cement kiln on surrounding soil contaminations with PCNs and PCBs was stronger than that of PCDD/Fs by comparing the PCN, PCB, and PCDD/F homologue profiles in the fly ash sample from the plant and soil samples at different distances. The total carcinogenic risks (CR) of PCNs, PCBs, and PCDD/Fs for children and adults in soil were 1.65 × 10^-8-8.93 × 10^-8 and 1.70 × 10^-8-9.16 × 10^-8, respectively, which was less than the risk threshold (CR = 1 × 10^-6), and there was no health risk.

Characteristics of PAHs, PCDD/Fs, PCBs and PCNs in atmospheric fine particulate matter in Dalian, China

Organic species in fine particulate matter (PM_2.5) may exhibit significant health risks. The level, composition and sources of PM_2.5-bound organic pollutants are temporally and spatially highly variable. In this study, the pollution characteristics and health risks of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) in PM_2.5 of Dalian were investigated. PM_2.5-bound organic pollutants in Dalian were generally lower than other regions in China and other countries, significant seasonal changes were observed, higher levels appeared in winter than in summer. Concentrations of 16 PAHs were 2.07 ng/m³ and 13.99 ng/m³ in summer and winter, respectively. PAHs with 4-ring and 5-ring were the dominant components. Diagnostic analysis and principal component analysis (PCA) indicated that PAHs mainly originate from petroleum emissions and combustion. Concentrations of PCDD/Fs, PCBs and PCNs in PM_2.5 ranged from 0.05 to 3.27, 0.04-0.65 and 0.05-1.42 pg/m³, respectively. PCDD/Fs and PCBs were mainly consisted of high-chlorinated homologues during the sampling period. High-chlorinated PCNs were dominated only in winter, while low-chlorinated PCNs were dominated in summer, industrial thermal activity was one of the main sources of PCNs. The high correlation coefficients of the concentration of PAHs, PCBs, PCNs, and PCDD/Fs with that of SO₂ indicated that combustion sources contributed more to PM_2.5-bound organic pollutants than that of motor vehicle emissions. The incremental lifetime cancer risk induced by PM_2.5-bound POPs is relatively lower in Dalian than other regions.

In-situ fabrication of a chlorine-functionalized covalent organic framework coating for solid-phase microextraction of polychlorinated biphenyls in surface water

The functionalization of covalent organic frameworks (COFs) identifies significant potential for developing selective coating materials for solid-phase microextraction (SPME). Herein, a chlorine-functionalized covalent organic framework (CF-COF) was in-situ synthesized by employing triformylphloroglucinol (Tp) and 2,5-dichloro-1,4-phenylenediamine (2,5-DCA) as monomers on an amino-functionalized stainless steel wire. The obtained CF-COF coated fiber exhibited a higher enrichment capacity for polychlorinated biphenyls (PCBs) than commercial fibers and non-chlorinated COF fiber, owing to a more hydrophobic surface, size-matching effect, a large number of micropores and the π-π stacking interactions between COF coating and analytes. As a practical application, the CF-COF coated fiber was applied to the headspace extraction of 17 PCBs prior to their quantification by GC/MS. The established analytical method offered a good linearity in the range of 0.1-1000 ng L^-1, low detection limits of 0.0015-0.0088 ng L^-1, and satisfactory enhancement factors (EFs) of 699-4281. The repeatability for single fiber and the fiber-to-fiber reproducibility was lower than 9.26% and 9.33%, respectively. The proposed method was verified to be sensitive, selective, and applicable for the analysis of ultra-trace PCBs in environmental surface water samples with the recoveries ranged from 78.7% to 124.0%.

Spatial distribution and source identification of persistent organic pollutants in the sediments of the Yeşilırmak River and coastal area in the Black Sea

Surface sediments from the Yeşilırmak River and the near coastal area in the Black Sea were collected using sediment traps to assess the spatial distributions of persistent organic pollutants and find their potential sources. Analyses were carried out to determine the concentrations of the persistent organic pollutants of seventeen polychlorinated dibenzo-p-dioxins and dibenzofurans, sixteen polycyclic aromatic hydrocarbons, seven polychlorinated biphenyls, and eight organochlorine pesticides using high-resolution gas chromatography-mass spectrometry and gas chromatography-tandem mass spectrometry systems. Analysis showed that the three main components of persistent organic pollutants (polychlorinated dibenzo-p-dioxins and dibenzofurans, polycyclic aromatic hydrocarbons, and organochlorine pesticides) primary sources are industrial activities. In addition, the widespread occurrence of persistent organic pollutants in the watershed surface sediments taken from the Yeşilırmak River basin showed that agricultural and urban areas are also diffuse persistent organic pollutants sources.

Contamination characteristics of polychlorinated naphthalenes in the agricultural soil of two industrial cities in South Korea

This study investigates the contamination characteristics of polychlorinated naphthalenes (PCNs) in the rice paddy soils of two industrial cities (Pohang and Ulsan) in South Korea. The paddy soils were collected from 40 sites in the paddy fields near industrial complexes in both cities. The mean concentration of Σ₅₅ PCNs was 145.9 ± 101.7 pg/g and 95.4 ± 41.4 pg/g for the soils in Pohang and Ulsan, respectively. The toxic equivalents (TEQs) of Σ₂₈ PCNs ranged from 0.007 pg-TEQ/g to 0.069 pg-TEQ/g in Pohang, and 0.015 pg-TEQ/g to 0.046 pg-TEQ/g in Ulsan. The PCN profiles were dominated by lower chlorinated homologues such as tetra- and tri-CNs for both cities, which are associated with the historical use of technical products, or more specifically, Halowaxes (HW 1099, 1031, 1013, and 1001). The results of the principal component analysis (PCA) indicate that the historical residues from the technical products contributed to the PCN contamination, but the influence of combustion sources was also observed with a high fraction of combustion-related congeners. Based on this study, we can expect that rice grown in these paddy fields will accumulate PCNs and other combustion-related pollutants, strongly suggesting the necessity for multimedia (e.g., air, soil, water, and rice) monitoring and human exposure assessments of PCNs.

Occurrence of dioxin-like POPs in soils from urban green space in a metropolis, North China: implication to human exposure

Urban green space is a special space for urban life and natural contact and has an important impact on human health. However, little information is available on dioxin-like persistent organic pollutants (POPs) in the soils from the specific areas. We measured the concentrations of polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and polychlorinated biphenyls (PCBs) in the soils from urban green space in a metropolis, North China, and found total concentrations of PCDD/Fs, PCBs, and PCNs in the range of 11.5-91.4, 14.7-444, and 82.5-848 pg/g, respectively. It was worth to notice that the concentrations of PCDD/Fs in public park soil from urban center were significantly higher than those in the road greenbelts and resident lawns (Kruskal-Wallis test, p = 0.004). The source analysis indicated that sewage sludge from wastewater treatment plants were important sources of PCNs and PCDD/Fs in urban green land soils, and atmospheric deposition from municipal solid waste incinerator (MSWI) also play an important role in PCDD/F sources. The rough exposure risk evaluation showed that the residents were at a safe level with the daily doses being 0.172-3.144 fg/kg BW/day for children and 0.022-0.406 fg/kg BW/day for adult. Due to the complex and variable sources of PCDD/Fs in urban areas, dioxin-like POPs in urban green land should be given more attention to weaken human exposure.

Atmospheric Concentrations and Health Implications of PAHs, PCBs and PCDD/Fs in the Vicinity of a Heavily Industrialized Site in Greece

Background: Thriassion Plain is considered the most industrialized area in Greece and thus a place where emissions of pollutants are expected to be elevated, leading to the degradation of air quality. Methods: Simultaneous determination of polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), and polychlorinated biphenyls (PCBs) was performed in PM10 samples. SPSS statistical package was employed for statistical analysis and source apportionment purposes. Cancer risk was estimated from total persistent organic pollutants’ (POPs) dataset according to the available literature. Results: POPs concentrations in particulate matter were measured in similar levels compared to other studies in Greece and worldwide, with mean concentrations of ΣPAHs, ΣPCDD/Fs, dioxin like PCBs, and indicator PCBs being 7.07 ng m−3, 479 fg m−3, 1634 fg m−3, and 18.1 pg m−3, respectively. Seasonal variations were observed only for PAHS with higher concentrations during cold period. MDRs, D/F ratios, and principal component analysis (PCA) highlighted combustions as the main source of POPs’ emissions. Estimation of particles’ carcinogenic and mutagenic potential indicates the increased toxicity of PM10 during cold periods, and cancer risk assessment concludes that 3 to 4 people out of 100,000 may suffer from cancer due to POPs’ inhalation. Conclusions: Increased cancer risk for citizens leads to the necessity of chronic POPs’ monitoring in Thriassion Plain, and such strategies have to be a priority for Greek environmental authorities.

The effect of polychlorinated biphenyls (PCBs) on bovine oviductal contractions and LIF synthesis during estrous cycle, in vitro studies

Polychlorinated biphenyls (PCBs) are a group of synthetic xenobiotics that have been used in many industrial applications. Currently, PCBs are among the most prominent environmental contaminants. Previously we showed that PCBs impair secretion of prostaglandins (PGs) at the oviduct. PGs are involved in the regulation of oviductal contractions and the synthesis of leukemia inhibitory factors LIF. Since oviductal contractions are crucial for gamete and embryo transport, and LIF is essential for embryo implantation, the direct effect of PCBs on oviductal motor activity and LIF mRNA expression were investigated. Oviductal strips and cells were taken from cows during the estrous cycle and were treated with PCBs at concentrations close to their environmental ranges. All the studied PCBs decreased the force of the contractions of the longitudinal and circular muscles of the isthmus. Additionally, these PCBs decreased the amplitude of the longitudinal muscle of the oviduct. Moreover, PCB-30-OH and PCB-153 increased the mRNA expression of LIF. Since PCBs inhibit the motor function of the oviduct and stimulate the synthesis of LIF, it is possible that PCBs can slow gamete or embryo transport and increase the potential for pathological embryo implantation in the oviduct.

Concentrations, Sources, and Potential Human Health Risks of PCDD/Fs, dl-PCBs, and PAHs in Rural Atmosphere Around Chemical Plants in Jiangsu Province, China

Concentrations and sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), and polycyclic aromatic hydrocarbons (PAHs) in a rural atmosphere near industrial zones in Jiangsu, China were determined and the associated risks were assessed. The concentrations of ΣPCDD/Fs, ΣPCBs, and ΣPAHs ranged from 11.9-57.7 pg·m^-3, 0.58-2.71 pg m^-3, and 11-18 ng m^-3, respectively. Principal component analysis suggested that the contamination of air with PCDD/Fs and PCBs mainly originated from industrial activities and combustion processes. In contrast, the major source of PAHs was the combustion of petroleum, coal, and biomass. These data were used to estimate the exposure of the population living nearby to these persistent organic pollutants and to evaluate the non-carcinogenic and carcinogenic risks associated with their inhalation. Our study are likely to be helpful for developing and implementing regulation strategies for PCDD/Fs, dl-PCBs, and PAHs in the atmosphere around industrial and surrounding residential areas.

Polychlorinated naphthalenes, polychlorinated dibenzo-p-dioxins and dibenzofurans, and polychlorinated biphenyls in soils in an industrial park in Northwestern China: Levels, source apportionment, and potential human health risks

Seventeen soil samples collected in an industrial park located in Ningxia Province, Northwestern China were analyzed for polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and polychlorinated biphenyls (PCBs). The PCN, PCDD/F, and PCB concentration ranges were 183-3340, 7.00-215, and 45.1-355 pg/g, respectively. Positive matrix factorization showed that secondary ferrous metal smelters and cement kilns contributed more than 70% of the total PCN concentration. Historical use of Halowax 1051 also affected the PCN concentrations in soil. Principal component analysis indicated that the PCDD/F concentrations in soil in the study area were mainly affected by thermal processes in secondary ferrous metal smelters. CB-209 was an important contributor to total PCBs in the study area, and likely originated from the phthalocyanine-type pigments used in a local recycled paper mill. Samples S10, S1, S17, and S6 had high ∑TEQ (PCDD/Fs + PCNs + PCBs) concentrations, and the carcinogenic risks of PCDD/Fs, PCNs, and PCBs for workers from these samples were 0.487 × 10^-6, 0.234 × 10^-6, 0.230 × 10^-6, and 0.210 × 10^-6, respectively. According to our results, the health risks of PCDD/Fs, PCNs, and PCBs for workers in this area should be given more attention.

Method development for analyzing ultratrace polyhalogenated carbazoles in soil and sediment

In the past few years, polyhalogenated carbazoles (PHCZs) have been of increasing concern because their structure is similar to that of legacy POPs. In the present study, an analytical method, including intensive cleanup and fractionation procedures in combination with instrumental parameters, was developed to determine ultratrace polyhalogenated carbazoles (PHCZs) in soil and sediment. The eluting sorbents, volume and packing of the column were optimized. Our results showed that 5 g of florisil and 4 g of silica gel under 150 mL of hexane/DCM = 3:1 presented good performance in terms of recovery and repeatability. GC-HRMS, GC-MS/MS (EI-MRM) and GC-MS (EI-SIM) were applied to compare the performance of PHCZ analysis. For sensitivity, EI-MRM presents method detection limits comparable to those of GC-HRMS and much lower than those of EI-SIM. Regarding selectivity, GC-HRMS performed better than the other two techniques since GC-HRMS can reduce interference from perfluorokerosene (PFK) and DDX (DDT, DDE, and DDD) due to its high resolution. GC-HRMS was then further optimized by shortening the run time and modifying the SIM ion. The final method was successfully applied to determine PHCZs in soil and sediment, and the target compounds had almost 100% detection frequency in the samples. The ubiquitous presence of PHCZ in soil and sediment calls for a further investigation of its source, distribution and degradation in the environment.

Congener-specific composition of polychlorinated biphenyls (PCBs) in soil-air partitioning and the associated health risks

The recent changes in the compositions of polychlorinated biphenyls (PCBs) after their restriction for 40 years may have various effects on human health. In order to characterize the congener-specific compositions of PCBs in the soil-air process and assess the associated human health risks, soil and air samples were simultaneously collected in winter and summer at two different functional locations. Homologue patterns suggest that long-range atmospheric transport might be the major source of soil and air residues of PCBs. The net deposition from air to soil was overwhelming for most PCB congeners. Variations in the occurrence and the homologue patterns of PCBs between the soil and air interface depended on chemical volatility, soil organic matter (OM) content, ambient temperature, topographical condition and atmospheric transport. Dioxin-like PCBs accounted for 11.0-70.3% and 2.31-54.8% of total PCB residues in soil and air, respectively. Non-carcinogenic and carcinogenic risks associated with exposure to soil and air PCBs were also estimated. Different PCB congeners showed different health effects, with the highest contribution from PCB-26. Additionally, the non-carcinogenic risk levels of PCBs were enhanced, while the carcinogenic risk levels decreased during the soil-air exchange process of PCBs with time. Our results highlight the soil-air interaction of PCBs in predicting their potential human exposure health risks.

Polychlorinated naphthalenes in human serum samples from an industrial city in Eastern China: Levels, sources, and sex differences

Polychlorinated naphthalenes (PCNs) in the environment in China have been studied extensively. However, there have been no reports on PCNs in human serum samples from China. In this context, we collected 480 serum samples from an industrial city in Eastern China. The concentration range for the sum of the mono-to octa-CNs was 14300-50700 pg/g lipid. The most predominant congener was CN-5/7, which accounted for 21.6%-51.1% of the total PCN concentration. Further analysis indicated that residues of PCN industrial technical products in the local environment appear to be the main source of CN-5/7 in the serum samples. On the other hand, the sum of the tetra-to octa-CNs concentration was obviously higher in males (1390 ± 929 pg/g lipid) than in females (267 ± 25 pg/g lipid). Moreover, the concentrations of combustion-related PCNs in the male 20-24, 25-29 and 30-34 years groups were obviously higher than those in the female samples. Therefore, industrial thermal processes are important sources of PCNs in male serum in addition to PCN products. The toxic equivalent (TEQ) concentrations of PCNs in the pooled serum samples ranged from 0.12 to 0.40 pg/g lipid. CN-10 and CN-66/67 were the dominant TEQ congeners in male serum, and CN-10, CN-1, and CN-2 were the main TEQ congeners in female serum.

Occurrence, sources and ecotoxicological risks of polychlorinated biphenyls (PCBs) in sediment cores from urban, rural and reclamation-affected rivers of the Pearl River Delta, China

Sediment cores were collected to a depth of 40 cm (50 cm for urban river sediments) in the Pearl River Delta of China from rural river sediments and river sediments undergoing the process of urbanization and reclamation. Polychlorinated biphenyls (PCBs) in sediment cores were determined to evaluate their levels, distribution, possible sources and potential risks aimed at providing effective information of management practices for local governments. Our results showed that the total concentrations of PCBs (∑16PCBs) in urban, rural and reclamation-affected river sediments ranged from 16.15 to 477.85 μg kg^-1 (dry weight), with mean values of 121.94, 150.49 and 124.20 μg kg^-1 (dry weight), respectively. The most abundant PCB congeners among the study area were light PCBs. Generally, PCBs showed a decreasing trend with depth along sediment cores at most sampling sites. Source analysis indicated that PCBs in the three types of river sediments mainly originated from Aroclor 1242, 1248, 1254 and 1016. Risks evaluation based on sediment quality guideline quotient (SQGQ) showed PCBs at most sampling sites would cause no or moderate adverse biological effects on benthic organisms except surface sediments of U4 and R5 (high adverse biological effects). However, threshold effects level (TEL) is ignored when calculating SQGQ, which might underestimate the risks of PCBs. Thus, a new SQGQ (NSQGQ) taken TEL into consideration was established. Results showed that NSQGQ could evaluate ecotoxicological risks of PCBs better. Redundancy analysis (RDA) showed that PCBs in sediments were positively correlated with sand content and microbial biomass carbon (MBC) (p < 0.05).

The cytochrome P450BM-1 of Bacillus megaterium A14K is induced by 2,3,7,8-Tetrachlorinated dibenzo-p-dioxin: Biophysical, molecular and biochemical determinants

The current study describes biological changes in Bacillus megaterium A14K cells growing in the presence of 2,3,7,8-Tetrachlorinated dibenzo-p-dioxin (TCDD), the most potent congener of dioxins. The results indicate that the metabolizing of 2,3,7,8-TCDD by BmA14K was accompanied with a novel morphological and biophysical profile typified by the growth of single cells with high levels of biosurfactant production, surface hydrophobicity and cell membrane permeability. Moreover, the TCDD-grown bacteria exhibited a specific fatty acid profile characterized by low ratios of branched/straight chain fatty acids (BCFAs/SCFAs) and saturated/unsaturated fatty acids (SFAs/USFAs) with a specific "signature" due to the presence of branched chain unsaturated fatty acids (BCUFAs). This was synchronized with a significant induction of P450_BM-1, an unsaturated fatty acid-metabolizing enzyme in B. megaterium. Subsequently, the profile of oxygenated fatty acids in the TCDD-grown bacteria was typified by the presence of 5,6-epoxy derived from unsaturated C15, C16 and C17 fatty acids, that were absent in control bacteria. A net increase was also detected in both hydroxylated and epoxidized fatty acids, especially those derived from C15:0 and C16:1, respectively, suggesting a specific TCDD-induced "signature" of oxygenated fatty acids in BmA14K. Overall, this study sheds light on the use of B. megaterium A14K as a promising bioindicator/biodegrader of dioxins.

Preliminary investigation of polychlorinated dibenzo-p-dioxin and dibenzofuran, polychlorinated naphthalene, and dioxin-like polychlorinated biphenyl concentrations in ambient air in an industrial park at the northeastern edge of the Tibet-Qinghai Plateau, China

Ambient air samples collected in an industrial park at the northeastern edge of the Tibet-Qinghai Plateau (China) were analyzed for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated naphthalenes (PCNs), and dioxin-like (dl) polychlorinated biphenyls (PCBs). The PCDD/F, PCN, and dl-PCB concentrations were 1.18-2.18, 21.9-75.1, and 0.49-0.90 pg/m³, respectively. The concentrations of these compounds were clearly higher than that observed at a remote site and were comparable with those found in ambient air in industrial areas in other locations. A principal component analysis indicated that emissions from local industrial sites (a secondary aluminum smelter, a cement kiln, and a lead-zinc smelter) at which thermal processes are performed were the sources of PCDD/Fs to the air. The combustion-related PCN congener profiles suggested that industrial thermal processes strongly affect PCN concentrations in ambient air at the industrial park. The results clearly indicated that the industrial park is a source of environmental PCDD/Fs and PCNs at the northeastern edge of the Tibet-Qinghai Plateau.