Nanomaterials application for heavy metals recovery from polluted water: The combination of nano zero-valent iron and carbon nanotubes. Competitive adsorption non-linear modeling

Advanced nanoribbons in water purification: A comprehensive review

The increasing scarcity of clean water, coupled with the environmental repercussions of municipal and industrial wastewater, underscores the imperative for advancing novel technologies aimed at clean water production and effectively removing impurities and toxic contaminants. Research focusing on ribbon-based technologies has garnered substantial attention in recent years due to their promising applications in various fields. This article presents a comprehensive review of the diverse applications of ribbon in water and wastewater treatment. It delves into the various types of ribbon employed for water purification, elucidating their effectiveness in removing contaminants such as heavy metals, dyes, pesticides, medical waste, oil pollutants, and radioactive waste. We will also discuss methods such as adsorption, membrane separation, and advanced oxidation processes, which help to understand how ribbons remove pollutants from water. This review summarizes the recent progress in the field of water purification and discusses the current state-of-the-art research on the use of ribbons in wastewater treatment. The end of this article gives information about the regeneration and reusability of ribbons and about challenges and prospects.

A META analysis on the efficacy of functional materials for soil chromium remediation

Metallic chromium pollution in soil is widespread, which aroused intensive research in recent decades. In mainstream research, most studies use materials with a reducing ability to adsorb and reduce hexavalent chromium. However, comprehensive analyses and systematic verifications of these different materials are scarce. Therefore, this study conducted a meta-analysis of relevant papers published from 2013 to October 2024 to compare and analyze the performance and usage conditions of some common materials, such as iron-based materials, mineral inorganic materials, organic materials, and layered double hydroxide materials. We synthesized 31 papers for 186 pairwise comparisons and selected the Standardized Mean Difference (SMD) as the appropriate effect size for mean-to-mean comparisons. Fe-based materials had the most stable performance based on its numerous data support, while organic materials had the worst performance. The difference in performance between inorganic mineral materials was the greatest, which was closely related to the selection of components. The difference in the effectiveness of inorganic materials was the greatest, which was closely related to the selection of components and there was room for further improvement. Through further analysis of the impact of environmental factors on material performance, it can be concluded that the effect of the material was better under alkaline, non-sandy, low organic matter, and high CEC soil conditions.

Synergetic effect of green synthesized NZVI@Chitin-modified ZSM-5 for efficient oxidative degradation of tetracycline

The aggregation and limited activity of nanoscale zero-valent iron (NZVI) in aqueous media hinder its practical application. In this study, a cost-effective, environmentally friendly, robust, and efficient synthesis method for NZVI-based composite was developed. NZVI@Chitin-modified ZSM-5 (NZVI@C-ZSM) composite was facilely and greenly synthesized by loading NZVI into alkali-modified ZSM-5 molecular sieves after modifying with chitin as a surfactant and binder. NZVI@C-ZSM exhibited remarkable efficacy in TC removal, achieving a removal efficiency of 97.72% within 60 min. Compared with pristine NZVI, NZVI@C-ZSM demonstrated twice the removal efficiency, indicating that NZVI@C-ZSM effectively improved the dispersion and stability of NZVI. This enhancement provided more reactive sites for generating reactive oxygen species (ROS), significantly boosting catalytic activity and durability while reducing the potential risk of secondary pollution. An improved two-parameter pseudo-first-order kinetic model was used to effectively characterize the reaction kinetics. The mechanism for TC removal primarily involved an adsorption process and chemical oxidation-reduction reactions induced by hydroxyl radicals (•OH) and superoxide radicals (•O2-). Three potential degradation pathways for TC were suggested. Furthermore, NZVI@C-ZSM exhibited good resistance to interference, suggesting its broad potential for practical applications in complex environmental conditions. This study offers a viable material and method for addressing the issue of antibiotic-contaminated water, with potential applications in water resource management.

Cobalt/Iron Bimetallic Biochar Composites for Lead(II) Adsorption: Mechanism and Remediation Performance

The performance of nano-zero-valent iron for heavy metal remediation can be enhanced via incorporation into bimetallic carbon composites. However, few economical and green approaches are available for preparing bimetallic composite materials. In this study, novel Co/Fe bimetallic biochar composites (BC@Co/Fe-X, where X = 5 or 10 represents the CoCl2 concentration of 0.05 or 0.1 mol L-1) were prepared for the adsorption of Pb2+. The effect of the concentration of cross-linked metal ions on Pb2+ adsorption was investigated, with the composite prepared using 0.05 mol L-1 Co2+ (BC@Co/Fe-5) exhibiting the highest adsorption performance. Various factors, including the adsorption period, Pb2+ concentration, and pH, affected the adsorption of Pb2+ by BC@Co/Fe-5. Further characterisation of BC@Co/Fe-5 before and after Pb2+ adsorption using methods such as X-ray diffraction and X-ray photoelectron spectroscopy suggested that the Pb2+ adsorption mechanism involved (i) Pb2+ reduction to Pb0 by Co/Fe, (ii) Co/Fe corrosion to generate Fe2+ and fix Pb2+ in the form of PbO, and (iii) Pb2+ adsorption by Co/Fe biochar. Notably, BC@Co/Fe-5 exhibited excellent remediation performance in simulated Pb2+-contaminated water and soil with good recyclability.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

Adsorption of Pb2+ and Cu2+ in wastewater by lignosulfonate adsorbent prepared from corn straw

The heavy metal ions contained in industrial wastewater are a great threat to human health. Exploring a adsorbent which have low-cost, green environmental friendly, high adsorption capacity, good recycle is key to solve heavy metal ions pollution. Lignin sulfonate was obtained by treating corn stover, and then modified lignin sulfonate was obtained by hydrothermal method. The porous structure makes heavy metal ions occupy more internal adsorption sites. Modified lignosulfonate adsorbent efficiency removes heavy metals in wastewater especially Cu2+ and Pb2+. The adsorption capacity of Cu2+ on modified lignosulfonate is 450.3 mg g-1, Pb2+ is 475.4 mg g-1. In addition, for 40 mg L-1 Cu2+ and Pb2+ using 0.4 g L-1, the adsorption equilibrium is only reached within 60 min. Meanwhile, the removal ratio of Pb is 83 %, Cd is 72 %, Cu is 87 %, Zn is 36 %, Mn is 25 %, Cr is 95 %, and Fe is 99 % in wastewater using 0.4 g L-1 adsorbent in 2 h. This research develops a practical adsorbent to remove heavy metals from actual wastewater.

Selenite Removal from Aqueous Solution Using Silica-Iron Oxide Nanocomposite Adsorbents

In recent years, during industrial development, the expanding discharge of harmful metallic ions from different industrial wastes (such as arsenic, barium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, or zinc) into different water bodies has caused serious concern, with one of the problematic elements being represented by selenium (Se) ions. Selenium represents an essential microelement for human life and plays a vital role in human metabolism. In the human body, this element acts as a powerful antioxidant, being able to reduce the risk of the development of some cancers. Selenium is distributed in the environment in the form of selenate (SeO₄^2-) and selenite (SeO₃^2-), which are the result of natural/anthropogenic activities. Experimental data proved that both forms present some toxicity. In this context, in the last decade, only several studies regarding selenium's removal from aqueous solutions have been conducted. Therefore, in the present study, we aim to use the sol-gel synthesis method to prepare a nanocomposite adsorbent material starting from sodium fluoride, silica, and iron oxide matrices (SiO₂/Fe(acac)₃/NaF), and to further test it for selenite adsorption. After preparation, the adsorbent material was characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The mechanism associated with the selenium adsorption process has been established based on kinetic, thermodynamic, and equilibrium studies. Pseudo second order is the kinetic model that best describes the obtained experimental data. Also, from the intraparticle diffusion study, it was observed that with increasing temperature the value of the diffusion constant, K_diff, also increases. Sips isotherm was found to best describe the experimental data obtained, the maximum adsorption capacity being ~6.00 mg Se(IV) per g of adsorbent material. From a thermodynamic point of view, parameters such as ΔG⁰, ΔH⁰, and ΔS⁰ were evaluated, proving that the process studied is a physical one.

Adsorptive behavior of multi-walled carbon nanotubes immobilized magnetic nanoparticles for removing selected pesticides from aqueous matrices

The present work synthesized two new materials of functionalized multi-walled carbon nanotubes (MWCNT-OH and MWCNT-COOH) impregnated with magnetite (Fe₃O₄) using solution precipitation methodology. The resulting MWCNT-OH-Mag and MWCNT-COOH-Mag materials were characterized by scanning electron microscopy coupled with energy dispersion X-ray spectroscopy, Fourier transform infrared, X-ray diffraction, atomic force microscopy, and electrical force microscopy. The characterization results indicate that the -OH functional groups in the MWCNT interact effectively with magnetite iron favoring impregnation and indicating the regular distribution of nanoparticles on the surface of the synthesized materials. The adsorption efficiency of the MWCNT-OH-Mag and MWCNT-COOH-Mag materials was tested using the pollutants 2,4-D and Atrazine. Over batch studies carried out under different pH ranges, it was found that the optimal condition for 2,4-D adsorption was at pH 2, while for Atrazine, it was found at pH 6. The rapid adsorption kinetics of 2,4-D and Atrazine reaches equilibrium within 30 min. The pseudo-first-order model described 2,4-D adsorption well. The General-order model described better atrazine adsorption. The magnetically doped adsorbent functionalized with -OH surface groups (MWCNT-OH-Mag) demonstrated superior adsorption performance and increased Fe-doped sites. The Sips model described the adsorption isotherms accurately. MWCNT-OH-Mag presented the greatest adsorption capacity at 51.4 and 47.7 mg g^-1 for 2,4-D and Atrazine, respectively. Besides, electrostatic forces and complexation rule the molecular interactions between metals and pesticides. The leaching and regeneration tests of the synthesized materials indicate high stability in an aqueous solution. Furthermore, experiments with wastewater samples contaminated with the model pollutants indicate that the novel adsorbents are highly promising for enhancing water purification by adsorptive separation.

Algal-derived biochar as an efficient adsorbent for removal of Cr (VI) in textile industry wastewater: Non-linear isotherm, kinetics and ANN studies

Textile industries release effluent that contains the vast majority of heavy metals in which Cr (VI) is a toxic carcinogenic element that causes an environmental problem. The aim of the work is to synthesize algae-derived biochar derived from algae using slow pyrolysis at an operating temperature of 500 °C, a heating rate of 10 °C/min and a residence time of 60 min and to use it as an adsorbent to remove Cr (VI). The batch experiment was carried out using different concentrations of Cr (VI) (1, 10, 25, 50, 100, 125, 150 and 200 ppm) at different intervals of time (2.5, 5, 10, 15, 30, 60, 120 and 240 min). The maximum removal percentage of Cr (VI) is 97.88% for the metal concentration of 1 ppm exhibiting non-linear adsorption isotherm (Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin models) and kinetic models (pseudo-first order, pseudo-second order, nth order, and intra-particle diffusion) were analyzed using a solver add-in of Microsoft Excel. According to the results, the Langmuir isotherm model (R² = 0.999) and pseudo-nth order models are suitable to describe monolayer adsorption and the process kinetics, respectively. The maximum adsorption capacity of algal biochar to adsorb is 186.94 mg/g. For the prediction of the optimal removal efficacy, an artificial neural network of the MLP-2-7-1 model was used. The results obtained are useful for future work using algal biochar as an adsorbent of Cr (VI) from textile wastewater to achieve sustainable development goals.

Nanotechnology- A ray of hope for heavy metals removal

Environmental effects of heavy metal pollution are considered as a widespread problem throughout the world, as it jeopardizes human health and also reduces the sustainability of a cleaner environment. Removal of such noxious pollutants from wastewater is pivotal because it provides a propitious solution for a cleaner environment and water scarcity. Adsorption treatment plays a significant role in water remediation due to its potent treatment and low cost of adsorbents. In the last two decades, researchers have been highly focused on the modification of adsorption treatment by functionalized and surface-modified nanomaterials which has spurred intense research. The characteristics of nano adsorbents attract global scientists as it is also economically viable. This review shines its light on the functionalized nanomaterials application for heavy metals removal from wastewater and also highlights the importance of regeneration of nanomaterials in the view of visualizing the economic aspects along with a cleaner environment. The review also focused on the proper disposal of nanomaterials with crucial issues that persist in the adsorption process and also emphasize future research modification at a large-scale application in industries.

Role of Smooth Muscle Cells Regulated by Vitamin D in Bronchial Asthma Airway Remodeling and Efficacy of Nanomedicine on Bronchial Asthma

This study aimed to analyze the therapeutic effect of nanomedicine on bronchial asthma and the effect of vitamin 1,25-(OH)2D3 on airway remodeling. The four groups of Z1 (1,25-(OH)2D3+RNPEG-ABT-199), Z2 (RNPEG-ABT-199), Z3 (ABT-199), and Z4 (normal Control) were designed in this study. The prepared acid-responsive mitochondrial targeting nanomedicine (RNPEG-ABT-199) and non-responsive mitochondrial targeting nanomedicine (PEG-ABT-199) were applied to the treatment of asthma mouse models. The results showed the PU value of caspase-3 in Z4 was lower than Z1, Z2, and Z3 groups; and in Z3 was higher than Z1 and Z2 groups. IL-4, IL-5, and TNF-α levels in Z3 were obviously higher than Z1, Z2, and Z4 groups, while those in the Z1 were obviously lower than the Z2 and Z4 groups; the proliferation activity of airway smooth muscle cells (ASMCs) of Z3 was obviously higher than the Z1, Z2, and Z4 groups, and that of the Z1 was obviously lower than the Z2 group. In short, RNPEG-ABT-199 has stronger lysosomal escape ability and mitochondrial targeting than PEG-ABT-199. RNPEG-ABT-199 can cause apoptosis of inflammatory cells and decrease pro-inflammatory cytokines, which is better than PEG-ABT-199. Vitamin1,25-(OH)2D3 can obviously inhibit the proliferation activity of ASMCs cells, and be used in the treatment of asthma along with RNPEG-ABT-199.

Influence of aggregation and sedimentation behavior of bare and modified zero-valent-iron nanoparticles on the Cr(VI) removal under various groundwater chemistry conditions

Aggregation behaviors of bare, and sodium polyacrylate (PAA) and starch modified zero-valent-iron nanoparticles (nZVI), as well as their effects on the Cr (VI) removal were investigated by simulating the groundwater. Results showed that increased concentration of PAA (1-6 wt%) and starch (0.1-0.6 wt%) alleviated the aggregation of modified nZVI (abbreviated as P-nZVI and S-nZVI), while there was an optimum dosage of 4 wt% PAA and 0.3 wt% starch for the Cr (VI) removal, respectively. Moreover, as one of the fundamental water chemistry parameters, Ca²⁺ (0, 5, and 10 mg L^-1) greatly promoted the aggregation of modified nZVI, and decreased the Cr (VI) removal efficiency by them via forming bidentate bridging structure (between Ca²⁺ and PAA) or complexes (between Ca²⁺ and starch). Additionally, fulvic acid (FA) (0, 2, 5, and 10 mg L^-1) decreased the Cr (VI) removal by P-nZVI because of the significantly improved electronic repulsion. However, FA enhanced the aggregation of S-nZVI, but diminished its performance on Cr (VI) removal due to the bridging effect between FA and starch. The present study was of great importance in predicting the migration of nZVI and contaminants removal under complex geological conditions in groundwater.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Mechanically activated calcium carbonate and zero-valent iron composites for one-step treatment of multiple pollutants

The growing presences of conventional and emerging contaminants make the wastewater treatment increasingly difficult and expensive on a global scale. ZVI tends to be an expectable material for the detoxification of some difficult contaminants such as chlorinated solvents and nitroaromatics. In this work, together use with calcium carbonate (CaCO₃), which serves as a green supporter to ZVI and also direct participant toward the purification process, has been carried out by cogrinding to give a synergistic effect, particularly for treating multiple pollutants including both inorganic and organic compositions. Based on a set of analytical methods of XRD, FTIR, SEM, XPS, and other test methods, the activation mechanism of the ball milling process and the removal performances of the prepared composites were examined. The results prove that the mechanically activated calcium carbonate and ZVI composite samples exhibited extremely high removal capacity on a variety of pollutants contaminated water. The decolorization of azo dyes is mainly attributed to the breaking of chromogenic functional group nitrogen and nitrogen double bonds, and the removal mechanism of aromatic series occurs through a hydrogenation substitution reaction. As to the inorganic pollutant removals, besides the efficient heavy metal ion precipitations, phosphate and fluoride ions are co-precipitated through the formation of fluorapatite to achieve a simultaneous and synergistic removal effect. Under the optimal reaction conditions, the concentration of PO₄^3- is reduced from 250 to 0 mg/L, and that of F^- is reduced from 51.07 to 1.20 mg/L. The prepared composite sample of ZVI rand calcium carbonate allowed simultaneous removals of both inorganic and organic pollutants, simplifying the remediation process of complicated multiple contaminations.

Recent advances of carbon-based nano zero valent iron for heavy metals remediation in soil and water: A critical review

Heavy metal pollution in soil and water has presented a new challenge for the environmental remediation technology. Nano zero valent iron (nZVI) has excellent adsorbent properties for heavy metals, and thus, exhibits great potential in environmental remediation. Used as supporting materials for nZVI, carbon-based materials, such as activated carbon (AC), biochar (BC), carbon nanotubes (CNTs), and graphene (GNs) with aromatic rings formed by carbon atoms as the skeleton, have a large specific surface area and porous structure. This paper provides a comprehensive review on the advancement of carbon-based nano zero valent iron (C-nZVI) particles for heavy metal remediation in soil and water. First, different types of carbon-based materials and their combination with nZVI, as well as the synthesis methods and common characterization techniques of C-nZVI, are reviewed. Second, the mechanisms for the interactions between contaminants and C-nZVI, including adsorption, reduction, and oxidation reactions are detailed. Third, the environmental factors affecting the remediation efficiency, such as pH, coexisting constituents, oxygen, contact time, and temperature, are highlighted. Finally, perspectives on the challenges for utilization of C-nZVI in the actual contaminated soil and water and on the long-term efficacy and safety evaluation of C-nZVI have been proposed for further development.

Zerovalent Iron Nanoparticles-Alginate Nanocomposites for Cr(VI) Removal in Water—Influence of Temperature, pH, Dissolved Oxygen, Matrix, and nZVI Surface Composition

The immobilization of zerovalent iron nanoparticles (nZVI) is a way to facilitate their use in continuous flow systems for the treatment of aqueous pollutants. In this work, two types of nZVI (powdered, NSTAR; and slurry suspended, N25) were immobilized in millimetric alginate beads (AL) by coagulation, forming nanocomposites (NCs). These NCs, N25@AL and NSTAR@AL, were structurally studied and tested for Cr(VI) removal. For both NCs types, SEM analysis showed a uniform distribution of the nanoparticles in micron-scale agglomerates, and XRD analysis revealed the preservation of α-Fe as the main iron phase of the immobilized nanoparticles. Additionally, Raman spectroscopy results evidenced a partial oxidation of the initially present magnetite. For both nZVI types, the Cr(VI) removal efficiency increased with temperature, decreased with pH, and did not show any significant change in anoxic or oxic conditions. On the other hand, N25@AL resulted a faster removal agent than NSTAR@AL; however, both materials had the same maximum removal capacity: 133 mg of Cr(VI) per gram of nZVI at pH 3. Cr(III) formed during the removal of Cr(VI) was retained by the alginate matrix, constituting a clear advantage against the use of free nZVI in suspension at acidic pH.

Facile auto-combustion synthesis of calcium aluminate nanoparticles for efficient removal of Ni(II) and As(III) ions from wastewater

We herein report the synthesis of monoclinic calcium aluminate (CaAl₂O₄) nanoparticles via a facile auto-combustion method followed by calcination. We performed the auto-combustion method using aluminium nitrate and calcium nitrate as oxidants and different fuels as reductants such as urea, glycine, and a mixture of urea and glycine, with various fuel-to-oxidant equivalence ratios (Φc). Then, the combusted samples were calcined at different temperatures; 600 and 800 °C. The products were characterized by means of X-ray diffraction, Fourier transform infrared spectroscopy, thermo-gravimetric analysis, field-emission scanning electron microscope, and high-resolution transmission electron microscope. CaAl₂O₄ nanoparticles with an average crystallite size of 40.4, 38.8, and 33.7 nm were obtained after calcination at 800 °C using the aforementioned fuels, respectively. TEM images revealed that CaAl₂O₄ nanoparticles tend to form partially sintered aggregates owing to the high thermal treatment temperature, so they have non-uniform shapes. The produced CaAl₂O₄ nanoparticles exhibited good absorptivity toward Ni(II) and As(III) ions form aqueous media. The maximum sorption capacities (q_m) of CaAl₂O₄ for the removal of Ni(II) and As(III) were found to be 58.73 and 43.9 mg.g^-1, at pH 7 and 5, respectively. The equilibrium isotherms and adsorption kinetics studies revealed that the adsorption data fitted well Freundlich isotherm and pseudo-second-order models, respectively. Besides, the adsorption of Ni(II) and As(III) ions on CaAl₂O₄ nanoparticles is physisorption. Overall, the obtained results indicated that calcium aluminate nano-adsorbent is a good candidate for the removal of Ni(II) and As(III) ions from wastewater, due to its high efficiency, stability, and re-usability.

Reduction of hexavalent chromium by Exiguobacterium mexicanum isolated from chromite mines soil

Hexavalent chromium is a highly toxic element generated due to indiscriminate chromite mining in Sukinda, Odisha. In the present research investigation a relatively higher Cr(VI) resistant (900 mg L^-1) bacterium CWB-54 was isolated from the chromite mine water. Based on the biochemical and molecular analysis the strain (CWB-54) was identified as Exiguobacterium mexicanum. When this bacterium was grown at 35 °C, 100 rpm, pH~8.0, and fructose as an electron donor, it could reduce the total hexavalent chromium (100 mg L^-1) supplemented in the medium within 33 h of incubation period. Though experiment was carried out to study the effect of Mn, Ni, Cd, Hg and Zn on Cr(VI) reduction by the strain E. mexicanum it has been observed that in the presence of Cd and Hg, Cr(VI) reduction drastically decreased. Characterization of Cr(VI) reduced product by SEM-EDX and TEM analysis revealed intracellular and extracellular Cr(III) deposition in the bacterium, which is assumed to be Cr(OH)3 precipitate in nanometric size. But the extracellular chromate reductase enzyme production is found to be negligible as compared to the intracellular enzyme production. The increased concentration of Cr(VI) above (1000 mg L^-1) also showed the genotoxic effect on the DNA. Several reports have been published on Exiguobacterium sp. on different scientific aspect but the current report on the reduction of toxic Cr(VI) by a new species E. mexicanum is a novel one which established the potentiality of this microorganism for a broad area of application.

Recent advances in technologies for removal and recovery of selenium from (waste)water: A systematic review

Selenium (Se) is distributed into different environmental compartments by natural and anthropogenic activities, and generally discharged in the form of selenate [SeO₄^2-] and selenite [SeO₃^2-], which are both toxic. Physical-chemical and biological treatment processes have been reported to exhibit good treatment efficiencies for Se from aqueous streams, only a few demonstrated to achieve effluent concentrations <5 μg/L. Moreover, there are only a few numbers of studies that describe the progress in technological developments over the last decade. Therefore, to unify the state of knowledge, identify ongoing research trends, and determine the challenges associated with available technologies, this systematic review critically analyses the published research on Se treatment. Specific topics covered in this review include (1) Se chemistry, toxicity, sources and legislation, (2) types of Se treatment technologies, (3) development in Se treatment approaches, (4) Se recovery and circular economy and (5) future prospects. The current research has been found to majorly focused on Se removal via adsorption techniques. However, the key challenges facing Se treatment technologies are related to the presence of competing ions in the solution and the persistence of selenate compared to selenite during their reduction.

Magnetic solid-phase extraction based on multi-walled carbon nanotubes combined ferroferric oxide nanoparticles for the determination of five heavy metal ions in water samples by inductively coupled plasma mass spectrometry

An excellent magnetic multi-walled carbon nanotubes (MMWCNT) containing carboxyl material modified with ferroferric oxide (Fe₃O₄) nanoparticles was synthesized as the adsorbent for magnetic solid-phase extraction (MSPE) of five heavy metal ions (Pb²⁺, Cu²⁺, Co²⁺, Cd²⁺, Cr⁴⁺) in water samples followed by on-line inductively coupled plasma mass spectrometry (ICP-MS) detection. The characteristics of the adsorbent were analyzed using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), and vibrating sample magnetometer (VSM). Some factors affecting extraction efficiency including pH of sample solution, the amount of adsorbent, extraction method and time, concentration and volume of desorption solvent, desorption time and evaluation of coexisting ions were optimized. Under the optimum conditions, good linearity (r ≥ 0.9951) was obtained within the range of 0.1-50.0 ng·mL^-1. The limits of detection (LODs) and limits of quantification (LOQs) were 4.0-25.0 ng·L^-1 and 15.0-80.0 ng·L^-1, respectively. And satisfactory recoveries of five heavy metal ions ranged from 81.11% to 105.53% were acquired, and the relative standard deviations (RSDs) were no more than 6.05%. The MMWCNT synthesized had strong adsorption force for the five investigated heavy metal ions, respectively. Hence, the proposed method was so suitable and sensitive that it can be applied to the determination of trace analysis of heavy metals in water samples.

Recent Advances of Nanoremediation Technologies for Soil and Groundwater Remediation: A Review

Nanotechnology has been widely used in many fields including in soil and groundwater remediation. Nanoremediation has emerged as an effective, rapid, and efficient technology for soil and groundwater contaminated with petroleum pollutants and heavy metals. This review provides an overview of the application of nanomaterials for environmental cleanup, such as soil and groundwater remediation. Four types of nanomaterials, namely nanoscale zero-valent iron (nZVI), carbon nanotubes (CNTs), and metallic and magnetic nanoparticles (MNPs), are presented and discussed. In addition, the potential environmental risks of the nanomaterial application in soil remediation are highlighted. Moreover, this review provides insight into the combination of nanoremediation with other remediation technologies. The study demonstrates that nZVI had been widely studied for high-efficiency environmental remediation due to its high reactivity and excellent contaminant immobilization capability. CNTs have received more attention for remediation of organic and inorganic contaminants because of their unique adsorption characteristics. Environmental remediations using metal and MNPs are also favorable due to their facile magnetic separation and unique metal-ion adsorption. The modified nZVI showed less toxicity towards soil bacteria than bare nZVI; thus, modifying or coating nZVI could reduce its ecotoxicity. The combination of nanoremediation with other remediation technology is shown to be a valuable soil remediation technique as the synergetic effects may increase the sustainability of the applied process towards green technology for soil remediation.

Multi wall carbon nanotubes application for treatment of Cr(VI)-contaminated groundwater; Modeling of batch & column experiments

Multi wall carbon nanotubes (MWCNTs) are carbonaceous nanomaterials with novel adsorption properties. In this study MWCNTs were used as adsorbents for hexavalent chromium, Cr(VI), and the influence of operating parameters, on adsorption process, such as pH, MWCNTs and Cr(VI) concentration, and contact time have been investigated. Batch and column experiments were carried out in order to investigate the removal efficiency of MWCNTs for different Cr(VI) concentrations related to groundwater polluted by either anthropogenic activities or by geogenic processes. The experimental results showed that pH was the most crucial factor for adsorption efficiency. Cr(VI) adsorption was inversely proportional with pH value and more specifically adsorption was significantly decreased for pH values higher than 7. The effect of adsorbent's concentration showed the high adsorption capacity of MWCNTs. The adsorption process was very fast since was almost completed within 1 h. Different isotherm models have been adopted to interpret the experimental equilibrium data, as well as two mass-transfer based model were used to describe the dynamic behavior of Cr(VI) sorption phenomenon in column experiments.

Adsorption characteristics of Pb(II), Cd(II) and Cu(II) on carbon nanotube-hydroxyapatite

Based on batch experiments, we investigate the adsorption characteristics of Pb(II), Cd(II) and Cu(II) on multi-walled carbon nanotube-hydroxyapatite (MWCNT-HAP) composites in detail and explore the effects of the solid-to-liquid ratio, pH, the ionic strength, reaction time and temperature on adsorption. The results show that the adsorption on MWCNT-HAP follows Pb(II)>Cu(II)>Cd(II). With an increasing solid-to-liquid ratio, the adsorption quantity of Pb(II), Cd(II) and Cu(II) on MWCNT-HAP decreases, whereas the removal efficiency increases. The optimal pH for adsorption is 4.0∼6.0. The effect of the ionic strength on the adsorption of Cd(II) is pronounced, whereas that on the adsorption of Pb(II) and Cu(II) is small. In the single-component system and ternary-component system, the adsorption processes for Pb(II), Cd(II) and Cu(II) on MWCNT-HAP have fast kinetics, and the pseudo-second-order kinetics model can well describe the adsorption kinetics of the three heavy metals. The adsorption of Pb(II), Cd(II) and Cu(II) on MWCNT-HAP is spontaneous and endothermic, and the Langmuir model can well simulate the isothermal adsorption of Pb(II) and Cu(II), whereas the Langmuir and Freundlich models can be used to describe the isothermal adsorption of Cd(II).

Experimental and Numerical Study of Biochar Fixed Bed Column for the Adsorption of Arsenic from Aqueous Solutions

Two laboratory tests were carried out to verify the suitability of an Italian commercial biochar as an adsorbing material. The chosen contaminant, considered dissolved in groundwater, was As. The circular economic concept demands the use of such waste material. Its use has been studied in recent years on several contaminants. The possibility of using an efficient material at low cost could help the use of low-impact technologies like permeable reactive barriers (PRBs). A numerical model was used to derive the kinetic constant for two of the most used isotherms. The results are aligned with others derived from the literature, but they also indicate that the use of a large amount of biochar does not improve the efficiency of the removal. The particular origin of the biochar, together with its grain size, causes a decrease in contact time required for the adsorption. Furthermore, it is possible that a strong local decrease in the hydraulic conductibility does not allow for a correct dispersion of the flow, thereby limiting its efficiency.

Nano-remediation of toxic heavy metal contamination: Hexavalent chromium [Cr(VI)]

The inexorable industrialization and modern agricultural practices to meet the needs of the increasing population have polluted the environment with toxic heavy metals such as Cr(VI), Cu²⁺, Cd²⁺, Pb^2+, and Zn²⁺. Among the hazardous heavy metal(loid)s contamination in agricultural soil, water, and air, hexavalent chromium [Cr(VI)] is the most virulent carcinogen. The metallurgic industries, tanneries, paint manufacturing, petroleum refineries are among various such human activities that discharge Cr(VI) into the environment. Various methods have been employed to reduce the concentration of Cr(VI) contamination with nano and bioremediation being the recent advancement to achieve recovery at low cost and higher efficiency. Bioremediation is the process of using biological sources such as plant extracts, microorganisms, and algae to reduce the heavy metals while the nano-remediation uses nanoparticles to adsorb heavy metals. In this review, we discuss the various activities that liberate Cr(VI). We then discuss the various conventional, nano-remediation, and bioremediation methods to keep Cr(VI) concentration in check and further discuss their efficiencies. We also discuss the mechanism of nano-remediation techniques for better insight into the process.

Heterogeneous Fenton catalysts: A review of recent advances

Heterogeneous Fenton catalysts are emerging as excellent materials for applications related to water purification. In this review, recent trends in the synthesis and application of heterogeneous Fenton catalysts for the abatement of organic pollutants and disinfection of microorganisms are discussed. It is noted that as the complexity of cell wall increases, the resistance level towards various disinfectants increases and it requires either harsh conditions or longer exposure time for the complete disinfection. In case of viruses, enveloped viruses (e.g. SARS-CoV-2) are found to be more susceptible to disinfectants than the non-enveloped viruses. The introduction of plasmonic materials with the Fenton catalysts broadens the visible light absorption efficiency of the hybrid material, and incorporation of semiconductor material improves the rate of regeneration of Fe(II) from Fe(III). A special emphasis is given to the use of Fenton catalysts for antibacterial applications. Composite materials of magnetite and ferrites remain a champion in this area because of their easy separation and reuse, owing to their magnetic properties. Iron minerals supported on clay materials, perovskites, carbon materials, zeolites and metal-organic frameworks (MOFs) dramatically increase the catalytic degradation rate of contaminants by providing high surface area, good mechanical stability, and improved electron transfer. Moreover, insights to the zero-valent iron and its capacity to remove a wide range of organic pollutants, heavy metals and bacterial contamination are also discussed. Real world applications and the role of natural organic matter are summarised. Parameter optimisation (e.g. light source, dosage of catalyst, concentration of H2O2 etc.), sustainable models for the reusability or recyclability of the catalyst and the theoretical understanding and mechanistic aspects of the photo-Fenton process are also explained. Additionally, this review summarises the opportunities and future directions of research in the heterogeneous Fenton catalysis.

Synthesis of an Alginate-Based Fe3O4-MnO2 Xerogel and Its Application for the Concurrent Elimination of Cr(VI) and Cd(II) from Aqueous Solution

In this study, magnetite-manganese oxide (Fe₃O₄-MnO₂) nanoparticles were synthesized and immobilized on alginate, producing a magnetite-manganese oxide xerogel (mMOX). This eco-friendly xerogel was used as an adsorbent of Cr(VI) and Cd(II). It was mesoporous and thermally stable, as determined by Brunauer-Emmett-Teller and thermogravimetric analysis. A scanning electron microscope coupled with an energy-dispersive X-ray system, Zetasizer, and attenuated total reflectance-Fourier transform infrared were used for characterization of adsorbents. The performance of the mMOX was investigated for the simultaneous adsorption of Cr(VI) and Cd(II) at different temperatures, pH values, contact times, initial concentrations of the adsorbate, and adsorbent doses. The developed xerogel (mMOX) showed high adsorption capacities of 3.86 mg/g for Cr(VI) and 3.95 mg/g for Cd(II) on 120 min of contact time with 5 ppm Cr(VI) and Cd(II) solution. The kinetic data fitted well with the pseudo-second order, while the Freundlich isotherm model was found to be fit for adsorption data. Thermodynamic study revealed the adsorption to be spontaneous and exothermic. The adsorbent showed useful application for real water samples by more than 75% uptake of Cr and Cd with low adsorption of Na, K, and Mg. The regeneration study indicated that the mMOX could be reused up to six cycles with more than 50% removal of Cr(VI) and Cd(II) ions from aqueous solution with minimal leaching of metal ions (Fe, Ca, Na, K, and Mn) into the solution.

Recent advances in the application of magnetic Fe3O4 nanomaterials for the removal of emerging contaminants

Emerging contaminants (ECs) are widely distributed and potentially hazardous to human health and the ecological system. However, traditional wastewater treatment techniques are not sufficient to remove ECs. Magnetic nanomaterials are made of ferromagnetic or superparamagnetic magnetic elements such as iron and nickel, which can be easily separated from the aqueous solution, making them ideal adsorbents for contaminants in water. This review focused on the synthesis approaches of magnetic Fe₃O₄ nanoparticles (MFNs), as well as surface modification in order to improve their stability and functional diversity. Also, a detailed summary on the state-of-art application of magnetic nanomaterials on the removal of ECs was addressed. Additionally, challenges and future prospective of applying magnetic nanomaterials into real-world cases were discussed, in which the green and simple synthesis and evaluation of the toxic effects of MFNs are still of great challenge. This work summarizes the recent progress of using magnetic nanomaterials as promising and powerful tools in the treatment of ECs-contaminated water, benefiting researchers interested in nanomaterials and environmental studies.

Applications of Nanomaterials for Heavy Metal Removal from Water and Soil: A Review

Heavy metals are toxic and non-biodegradable environmental contaminants that seriously threaten human health. The remediation of heavy metal-contaminated water and soil is an urgent issue from both environmental and biological points of view. Recently, nanomaterials with excellent adsorption capacities, great chemical reactivity, active atomicity, and environmentally friendly performance have attracted widespread interest as potential adsorbents for heavy metal removal. This review first introduces the application of nanomaterials for removing heavy metal ions from the environment. Then, the environmental factors affecting the adsorption of nanomaterials, their toxicity, and environmental risks are discussed. Finally, the challenges and opportunities of applying nanomaterials in environmental remediation are discussed, which can provide perspectives for future in-depth studies and applications.

Facile covalent preparation of carbon nanotubes / amine-functionalized Fe3O4 nanocomposites for selective extraction of estradiol in pharmaceutical industry wastewater

As a typical steroid hormone drug, estradiol (E2) is also one of the most frequently detected endocrine disrupting chemicals (EDCs) in the aquatic environment. Herein, in response to the potential risk of E2 in steroid hormone pharmaceutical industry wastewater to human and wildlife, a novel carbon nanotubes / amine-functionalized Fe₃O₄ (CNTs/MNPs@NH₂) nanocomposites with magnetic responsive have been developed for the enrichment and extraction of E2 in pharmaceutical industry wastewater, where amino-functionalized Fe₃O₄ magnetic nanoparticles (MNPs@NH₂) were used as a magnetic source. The resultant CNTs/MNPs@NH₂ possessed both the features of CNTs and desired magnetic property, enabling to rapidly recognize and separate E2 from pharmaceutical industry wastewater. Meanwhile, the CNTs/MNPs@NH₂ had good binding behavior toward E2 with fast binding kinetics and high adsorption capacity, as well as exhibited satisfactory selectivity to steroidal estrogen compounds. Furthermore, the change of pH value of aqueous phase in adsorption solvent hardly affected the adsorption of E2 by CNTs/MNPs@NH₂, and the adsorption capacity of E2 ranged from 19.9 to 17.2 mg g^-1 in the pH range of 3.0 to 11.0, which is a latent advantage of the follow-up development method to detect E2 in pharmaceutical industry wastewater. As a result, the CNTs/MNPs@NH₂ serving as a solid phase extraction medium were successfully applied to efficiently extract E2 from pharmaceutical industry wastewater. Therefore, the CNTs/MNPs@NH₂ nanocomposites could be used as a potential adsorbent for removing steroidal estrogens from water. More importantly, the developed method would provide a promising solution for the monitoring and analysis of EDCs in pharmaceutical industry wastewater.

Insight into the adsorption of Cr(vi) on functionalized carboxymethyl cellulose-based sponge via experimental and theoretical calculations

PEI–PAM–CM with a sponge-like structure can effectively remove Cr(vi) at low concentration by electrostatic attraction and chemical binding.

Speciation, toxicity mechanism and remediation ways of heavy metals during composting: A novel theoretical microbial remediation method is proposed

Heavy metals (HM) pollution is a major limitation to the application of composting products. Therefore, mitigating the toxicity of HM has attracted wide attention during composting. The toxicity of HM is mainly acted on microorganisms during composting, and the toxicity of different HM speciation is obviously various. There are many pathways to change the speciation to reduce the toxicity during composting. Therefore, in this review, the speciation distribution, toxicity mechanism and remediation ways of HM during composting were discussed in order to better solve HM pollution. The microbial remediation technology holds enormous potential to remediate for HM without damaging composting, however, it is hard to extract HM. The innovation of this review was to outline microbial remediation strategies for HM during composting based on two mechanisms of microbial remediation: extracellular adsorption and intracellular sequestration, to solve the problem how to extract microbial agents from the compost. Ultimately, a novel theoretical method of microbial remediation was proposed to remove HM from the compost.

Oxidized and Non-Oxidized Multiwalled Carbon Nanotubes as Materials for Adsorption of Lanthanum(III) Aqueous Solutions

The behavior of oxidized and non-oxidized multiwalled carbon nanotubes (MWCNTs) in the adsorption of lanthanum(III) from aqueous solutions is described. Metal uptake is studied as a function of several variables such as the stirring speed of the system, pH of the aqueous solution and metal and nanomaterial concentrations. The experimental results are fitted to various kinetic and isotherm models, the rate law being fitted to the film diffusion and particle diffusion models, when the non-oxidized and the oxidized nanomaterials are used to remove lanthanum from the solution, respectively. Sulfuric acid solutions seem to be appropriate to recover the metal from La-loaded nanomaterials.

Synthesis and Application of Zero-Valent Iron Nanoparticles in Water Treatment, Environmental Remediation, Catalysis, and Their Biological Effects

Present and past anthropogenic pollution of the hydrosphere and lithosphere is a growing concern around the world for sustainable development and human health. Current industrial activity, abandoned contaminated plants and mining sites, and even everyday life is a pollution source for our environment. There is therefore a crucial need to clean industrial and municipal effluents and remediate contaminated soil and groundwater. Nanosized zero-valent iron (nZVI) is an emerging material in these fields due to its high reactivity and expected low impact on the environment due to iron's high abundance in the earth crust. Currently, there is an intensive research to test the effectiveness of nZVI in contaminant removal processes from water and soil and to modify properties of this material in order to fulfill specific application requirements. The number of laboratory tests, field applications, and investigations for the environmental impact are strongly increasing. The aim of the present review is to provide an overview of the current knowledge about the catalytic activity, reactivity and efficiency of nZVI in removing toxic organic and inorganic materials from water, wastewater, and soil and groundwater, as well as its toxic effect for microorganisms and plants.

Magnetic Sorbent for the Removal of Selenium(IV) from Simulated Industrial Wastewaters: Determination of Column Kinetic Parameters

A novel meso- and microporous tire-derived-carbon support with magnetic iron oxide nanoparticle adsorbents that selectively adsorbs Se(IV) ions from simulated contaminated water has been developed. In this work, the physicochemical characteristics of the composite adsorbent are characterized with respect to porosity and surface area, chemical composition, and microstructure morphology. The kinetics of this composite adsorbent in a fixed-bed setting has been determined. Several column runs were conducted and analyzed by inductively coupled plasma-optical emission spectroscopy (ICP-OES) to determine the concentration gradient vs time. These results were then fit to a pseudo-second order rate law to obtain equilibrium values. Combining calculated equilibrium values with effluent concentration data, enabled the application of the Adams–Bohart model to determine reaction constants and column coefficients. Column parameters obtained from different flow rates and fittings of the Adams–Bohart model were remarkably consistent. These findings enable the application of this sorbent to fixed-bed column systems and opens up further research into mixed pollutants tests with real wastewater and scaling of selenium pollutant removal.

Removal of trace Cr(VI) from aqueous solution by porous activated carbon balls supported by nanoscale zero-valent iron composites

In this study, porous activated carbon balls supported by nanoscale zero-valent iron composites (Fe@PACB-700) were used for the first time for the removal of trace Cr(VI) from aqueous solutions. The Fe@PACB-700 composites were prepared by a facile carbothermal reduction method and then characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS). The results show that nZVI particles have been successfully loaded onto PACBs. Fe@PACB-700 shows an excellent Cr(VI) removal efficiency of 91.2%. The maximum adsorption capacity of Fe@PACB-700 for Cr(VI) is 22.24 mg/g, which is 4.36 times that of PACB. The residual Cr(VI) concentration is below 20 ppb with the use of 0.15 g of Fe@PACB-700, which is much lower than the allowable concentration for Cr(VI) in drinking water (0.05 mg/L). The adsorption of Cr(VI) can be well described by the Langmuir isotherm model and pseudo-second-order kinetic model. Fe@PACB-700 still has a high removal efficiency of 80% after five cycles. Thus, Fe@PACB-700 has a great potential for Cr(VI) removal from aqueous solution. Graphical abstract.

The improved methods of heavy metals removal by biosorbents: A review

For decades, a vast array of innovative biosorbents have been found out and used in the removal of heavy metals, including bacteria, algae and fungi, etc. Although extensive biological species have been tried as a biosorbent for heavy metals removal, for removal efficiency or economy efficiency limited, it has failed to make a substantial breakthrough in practical application. Thus, many improved methods based on biosorbents emerged. In this review, based on the literature and our research results, we highlight three types of novel methods for biosorbents removal of heavy metals: chemical modification of biosorbents; biomass and chemical materials combination; multiple biomass complex systems. We mainly focus on their configuration, biosorption performance, their creation method, regeneration/reuse, their application and development in the future. Through the comparative analysis of various methods, we think that intracellular autogenous nanomaterials may open up another window in biosorption of heavy metals area. At the same time, the combination of various treatment methods will be the development tendency of heavy metal pollution treatment in the future.

Nanoscale Zero Valent Iron Supported by Biomass-Activated Carbon for Highly Efficient Total Chromium Removal from Electroplating Wastewater

The application potential of nanoscale zero valent iron (nZVI) in wastewater treatment is huge and has attracted a lot of attention. In this study, the composite material BC-nZVI was prepared by emulsion of nZVI and biomass-activated carbon (BC) under the mechanical agitation condition, and was characterized by SEM-EDX, XRD, XPS, and FTIR. The decontamination abilities of BC-nZVI were tested by the removal of total chromium (Cr) from electroplating wastewater. The results showed that the removal efficiencies of Cr in the electroplating wastewater by nZVI particles can be effectively improved when supported with BC, but cannot be improved in its storage capacity. The chemical adsorption process between the Cr and BC-nZVI is the main rate-limiting step in the removal of total Cr from wastewater, and multiple parameters such as dosage, pH, and initial concentration of Cr was found to affect the rate.

Preparation of Activated Carbon Supported Bead String Structure Nano Zero Valent Iron in a Polyethylene Glycol-Aqueous Solution and Its Efficient Treatment of Cr(VI) Wastewater

Nanometer zero-valent iron (nZVI) has been widely used in the treatment of heavy metals such as hexavalent chromium (Cr(VI)). A novel composite of bead string-structured nZVI on modified activated carbon (nZVI–MAC) is prepared here, using polyethylene glycol as the stable dispersant rather than traditional ethanol during the loading process. The microstructure characterization shows that nZVI particles are loaded on MAC with a bead string structure in large quantity and stably due to the addition of hydroxyl functional groups on the surface by polyethylene glycol. Experiments on the treatment of Cr(VI) in wastewater show that the reaction process requires only 20 min to achieve equilibrium. The removal rate of Cr(VI) with a low concentration (80–100 mg/L) is over 99% and the maximum saturation removal capacity is up to 66 mg/g. The system converts Cr(VI) to trivalent chromium (Cr(III)) through an oxidation-reduction effect and forms an insoluble material with iron ions by coprecipitation, which is then adsorbed on the surface of the nZVI–MAC. The process conforms to the quasi-second order adsorption kinetics equation (mainly chemical adsorption process).

Effect of Nano Fe-oxide and Endophytic Fungus (P. indica) on Petroleum Hydrocarbons Degradation in an Arsenic Contaminated Soil under Barley Cultivation

BACKGROUND

Heavy metals and petroleum hydrocarbon pollution are important environmental problems. This research was conducted to evaluate the effect of nano Fe-oxide and endophytic fungus (P. indica) on petroleum hydrocarbons degradation in an arsenic and petroleum hydrocarbons contaminated soil using barley plant.

METHODS

Treatments consisted of the presence (E⁺) and the absence (E^-) of P.indica fungi, soil contaminated with As in the rates of 0 (AS₀), 12 (AS₁₂) and 24 (As₂₄) mg As /kg of soil, and application of 0 (Fe₀) and 1% (Fe₁) (W/W) nano Fe-oxide. The plant used in this study was the barley plant. After 7 weeks, the root and shoot As concentration was measured using atomic absorption spectroscopy. The concentration of total soil petroleum hydrocarbon (TPHS) was measured using GC-mass.

RESULTS

Application of nano Fe-oxide in soil treated with 12 and 24 mg As/kg soil decreased root As concentration by 30 and 20.6%, respectively. The presence of P.indica caused a significant reduction in the shoot As concentration. With increasing shoot Fe concentration the shoot As concentration was decreased. The highest TPHS degradation was observed in non As-polluted soil that containing 1% (W/W) nano Fe-oxide in the presence of P.indica, while the lowest that was in As polluted soil (24 mg As/kg soil) without applying nano Fe-oxide and in the absence of P.indica.

CONCLUSION

Increasing soil sorption properties due to nano Fe-oxide application had significant effect on TPHS degradation in the presence of P.indica. However the role of soil condition on the amount of TPHS degradation cannot be ignored.

Remediation performance and mechanism of hexavalent chromium in alkaline soil using multi-layer loaded nano-zero-valent iron

Remediation of soil chromium (Cr) pollution is becoming more and more urgent. In this study, a multi-loaded nano-zero-valent iron (nZVI) material (CNH) was prepared by carboxymethyl cellulose (CMC) and humic acid (HA) as dispersant and support agent, respectively, and the remediation effect of CNH, HA and CN (CNH without HA) for Cr contaminated soil was investigated within 90 d cycle. After 7 d treatment of CNH, the HOAc-extractable Cr decreased significantly. After the 90 d remediation, the HOAc-extractable Cr decreased most in the treatment of 3% CNH, about 74.48% lower than control. All treatments eventually caused different decline of soil pH, with a range of 0.12-0.54, in which the CNH treatment group had the least depression. HA loading significantly weakened the toxicity of nZVI, resulting in the higher soil microbial quantity and enzyme activities compared with CN. Additionally, the improvement of soil microecology by CNH and HA was positively correlated with the ratio of application, while CN was negatively correlated (except FDA enzyme activity) with these indexes. These results emphasized the potential of the synthesized CNH as a promising material to remediate Cr contaminated soil. Furthermore, details of possible mechanistic insight into the Cr remediation were carefully discussed.

Preparation of Biomass Activated Carbon Supported Nanoscale Zero-Valent Iron (Nzvi) and Its Application in Decolorization of Methyl Orange from Aqueous Solution

The nanoscale zero-valent iron (nZVI) has great potential to degrade organic polluted wastewater. In this study, the nZVI particles were obtained by the pulse electrodeposition and were loaded on the biomass activated carbon (BC) for synthesizing the composite material of BC-nZVI. The composite material was characterized by SEM-EDS and XRD and was also used for the decolorization of methyl orange (MO) test. The results showed that the 97.94% removal percentage demonstrated its promise in the remediation of dye wastewater for 60 min. The rate of MO matched well with the pseudo-second-order model, and the rate-limiting step may be a chemical sorption between the MO and BC-nZVI. The removal percentage of MO can be effectively improved with higher temperature, larger BC-nZVI dosage, and lower initial concentration of MO at the pH of 7 condition.