Particle size dependence of the physicochemical properties of biochar

Upgrading soybean dreg to caproate via intermediate of lactate and mediator of biochar

To address the environmental hazards posed by high-yield soybean dreg (SD), a high-value strategy is firstly proposed by synthesizing caproate through chain elongation (CE). Optimized conditions for lactate-rich broth as intermediate, utilizing 50 % inoculum ratio, 40 g/L substrate concentration, and pH 5, resulting in 2.05 g/L caproate from direct fermentation. Leveraging lactate-rich broth supplemented with ethanol, caproate was optimized to 2.76 g/L under a refined electron donor to acceptor of 2:1. Furthermore, incorporating 20 g/L biochar elevated caproate production to 3.05 g/L and significantly shortened the lag phase. Mechanistic insights revealed that biochar's surface-existed quinone and hydroquinone groups exhibit potent redox characteristics, thereby facilitating electron transfer. Moreover, biochar up-regulated the abundance of key genes involved in CE process (especially fatty acids biosynthesis pathway), also enriching Lysinibacillus and Pseudomonas as an unrecognized cooperation to CE. This study paves a way for sustainable development of SD by upgrading to caproate.

Biochar dust emission: Is it a health concern? Preliminary results for toxicity assessment

Biochar is currently garnering interest as an alternative to commercial fertilizer and as a tool to counteract global warming. However, its use is increasingly drawing attention, particularly concerning the fine dust that can be developed during its manufacture, transport, and use. This work aimed to assess the toxicity of fine particulate Biochar ( Collapse

Key Words

• Biochar
• Environmental pollution
• In-vitro studies
• In-vivo studies
• Occupational exposure

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Silvana Pinelli Department of Medicine and Surgery, University of Parma, Parma, Italy
Stefano Rossi Department of Medicine and Surgery, University of Parma, Parma, Italy
Alessio Malcevschi Department of Chemistry, Life Sciences and Environmental Sustainability, University of Parma, Parma, Italy
Michele Miragoli Department of Medicine and Surgery, University of Parma, Parma, Italy; Centre for Research in Toxicology (CERT), University of Parma, Parma, Italy; Humanitas Clinical and Research Center, IRCCS, Rozzano, Milan, Italy
Massimo Corradi Department of Medicine and Surgery, University of Parma, Parma, Italy; Centre for Research in Toxicology (CERT), University of Parma, Parma, Italy
Luisella Selis Department of Medicine and Surgery, University of Parma, Parma, Italy
Sara Tagliaferri Department of Medicine and Surgery, University of Parma, Parma, Italy; Centre for Research in Toxicology (CERT), University of Parma, Parma, Italy
Francesca Rossi National Research Council (CNR), Istituto dei Materiali per l'Elettronica ed il Magnetismo (IMEM), Parma, Italy
Delia Cavallo INAIL Research, Department of Occupational and Environmental Medicine, Epidemiology and Hygiene, Monte Porzio Catone, Italy
Cinzia Lucia Ursini INAIL Research, Department of Occupational and Environmental Medicine, Epidemiology and Hygiene, Monte Porzio Catone, Italy
Diana Poli INAIL Research, Department of Occupational and Environmental Medicine, Epidemiology and Hygiene, Monte Porzio Catone, Italy
Paola Mozzoni Department of Medicine and Surgery, University of Parma, Parma, Italy; Centre for Research in Toxicology (CERT), University of Parma, Parma, Italy.

Collapse

A Wooden Carbon-Based Photocatalyst for Water Treatment

Due to a large number of harmful chemicals flowing into the water source in production and life, the water quality deteriorates, and the use value of water is reduced or lost. Biochar has a strong physical adsorption effect, but it can only separate pollutants from water and cannot eliminate pollutants fundamentally. Photocatalytic degradation technology using photocatalysts uses chemical methods to degrade or mineralize organic pollutants, but it is difficult to recover and reuse. Woody biomass has the advantages of huge reserves, convenient access and a low price. Processing woody biomass into biochar and then combining it with photocatalysts has played a complementary role. In this paper, the shortcomings of a photocatalyst and biochar in water treatment are introduced, respectively, and the advantages of a woody biochar-based photocatalyst made by combining them are summarized. The preparation and assembly methods of the woody biochar-based photocatalyst starting from the preparation of biochar are listed, and the water treatment efficiency of the woody biochar-based photocatalyst using different photocatalysts is listed. Finally, the future development of the woody biochar-based photocatalyst is summarized and prospected.

Properties of biochar colloids and behaviors in the soil environment: Influencing the migration of heavy metals

Biochar pyrolyzed by biomass shows excellent application prospects for heavy metal (HM) remediation, but a part of biochar can be inevitably broken into micro- and nano-sized biochar colloids (BCs) under biological and physicochemical actions in soil. BCs derived in the process of remediation have rough surface, rich elemental species and contents, and multiple functional groups, which are similar to biochar. However, BCs have some unique colloidal properties because of their micro and nano scale size. Due to these properties, BCs exhibit strong mobilities in the soil environment, and the mobilities may be influenced by a combination of colloidal properties of BCs and environmental factors including soil colloids and other soil environmental conditions. In addition, BCs may have affinity effects on HMs through electrostatic adsorption, ion exchange, surface complexation, precipitation/co-precipitation, and redox because of the properties such as large specific surface area, and rich oxygen-containing functional groups and minerals on the surface. This review summarizes the physicochemical and migratory properties of BCs, and the internal and external factors affecting the migration of BCs in the soil environment, and the possible effects of BCs on HMs are high-lighted. This review provides a theoretical basis for the optimization of soil contaminated with HMs after remediation using biochar. Notably, the innovative idea that BCs may influence the presence of HMs in soil needs to be further confirmed by more targeted detection and analysis methods in future studies to prevent the possible environmental toxicities of the lateral and vertical diffusion of HM caused by BCs in soil.

The Effect of Granulometry of Carbonaceous Materials and Application Rates on the Availability of Soil-Bound Dichlorodiphenyltrichloroethane (DDT) and Its Metabolites

Biochars (BCs) and activated carbons (ACs) are well-known carbon-rich materials that are being increasingly studied in environmental sciences for water treatment applications to remediate pollutant sequestration in soil. This study aimed to assess the impact of Sargasso BC particle size and amendment rate on the environmental availability of DDT and DDT metabolites in two distinct Kazakh soils. These two soils were collected in the vicinity of storehouse facilities in Kyzylkairat and Beskainar that store banned pesticides. They presented very distinct concentration levels of DDT and DDT metabolites. Three different types of carbonaceous matrices were tested: Sargasso BC and two commercial ACs (ORBOTM and DARCO©). For the granulometry effect, Sargasso BC was ground, and two particle sizes were tested (<150 µm, >150 µm) and compared to an unground material. Four distinct application rates were tested (0.25, 0.5, 1, and 2% (w/w)). After a three-month maturation period, environmental availability was assessed using an ISO/DIS 16751, part B-modified methodology. Interestingly, the best reductions in DDT environmental availability were obtained with the finest particle size (both ACs and Sargasso BC < 150 µm). More specifically, the effectiveness of the strategy seemed to depend on many factors. Firstly, a clear soil effect was demonstrated, suggesting that the more contaminated the soil, the more efficient this strategy may be. Secondly, the results showed that an increase in the amendment rate improves the immobilization of DDT and DDT metabolites. The sequestration material demonstrated different efficiency values (up to 58 ± 4% for Sargasso BC < 150 µm and 85 ± 4% for DARCO at a 2% application rate). Finally, a clear molecule effect was displayed, demonstrating the following immobilization order: p,p'-DDE > p,p'-DDD > p,p'-DDT > o,p'-DDT.

Enhanced biomethane production from waste activated sludge anaerobic digestion by ceramsite and amended Fe2O3 ceramsite

Wastes recycling and reutilization technique could simultaneously fulfill waste control and energy recovery sustainably, which has attracted increasing attention. This work proposed a novel waste reuse technology utilizing ceramsite and amended Fe2O3-ceramsite made from waste activated sludge (WAS) as additives to promote the yield of methane from WAS anaerobic digestion (AD). Experimental results demonstrated that compared to the control (85.05 ± 0.2 mL CH4/g-VS), the cumulative methane yield was effectively enhanced by 14% and 40% when ceramsite and Fe2O3-ceramsite were added. Further investigation revealed that ceramsite, especially the Fe2O3-ceramsite, enriched the populations of key anaerobes involved in hydrolysis, acidification, and methanogenesis. Meanwhile, potential syntrophic metabolisms between syntrophic bacteria and methanogens were confirmed in the Fe2O3-ceramsite AD system. Mechanisms studies exhibited that ceramsite and Fe2O3-ceramsite reinforced intermediate processes for methane production. The favorable pore structure, enhanced Fe (III) reduction capacity and conductivity also contributed a lot to the AD process.

Impacts of kaolinite enrichment on biochar and hydrochar characterization, stability, toxicity, and maize germination and growth

In this study, biochar (BC) and hydrochar (HC) composites were synthesized with natural kaolinite clay and their properties, stability, carbon (C) sequestration potential, polycyclic aromatic hydrocarbons (PAHs) toxicity, and impacts on maize germination and growth were explored. Conocarpus waste was pretreated with 0%, 10%, and 20% kaolinite and pyrolyzed to produce BCs (BC, BCK10, and BCK20, respectively), while hydrothermalized to produce HCs (HC, HCK10, and HCK20, respectively). The synthesized materials were characterized using X-ray diffraction, scanning electron microscope analyses, Fourier transform infrared, thermogravimetric analysis, surface area, proximate analyses, and chemical analysis to investigate the distinction in physiochemical and structural characteristics. The BCs showed higher C contents (85.73-92.50%) as compared to HCs (58.81-61.11%). The BCs demonstrated a higher thermal stability, aromaticity, and C sequestration potential than HCs. Kaolinite enriched-BCs showed the highest cation exchange capacity than pristine BC (34.97% higher in BCK10 and 38.04% higher in BCK20 than pristine BC), while surface area was the highest in kaolinite composited HCs (202.8% higher in HCK10 and 190.2% higher in HCK20 than pristine HC). The recalcitrance index (R50) speculated a higher recalcitrance for BC, BCK10, and BCK20 (R50 > 0.7), minimal degradability for HCK10 and HCK20 (0.5 < R50 < 0.7), and higher degradability for biomass and HC (R50 < 0.5). Overall, increasing the kaolinite enrichment percentage significantly enhanced the thermal stability and C sequestration potential of charred materials, which may be attributed to changes in the structural arrangements. The ∑ total PAHs concentration in the synthesized materials were below the USEPA's suggested limits, indicating their safe use as soil amendments. Germination indices reflected positive impacts of synthesized charred materials on maize germination and growth. Therefore, we propose that kaolinite-composited BCs and HCs could be considered as efficient and cost-effective soil amendments for improving plant growth.

Properties of Poultry-Manure-Derived Biochar for Peat Substitution in Growing Media

Peat is considered a contentious input in horticulture. Therefore, there is a search for suitable alternatives with similar properties that can be used for partial or complete peat substitution in growing media. Poultry-manure-derived biochar (PMB) is considered such an alternative. This study aimed at determining the properties of PMBs obtained through pyrolysis at selected temperatures and assessing their potentials to substitute peat in growing media based on the selected properties. The scope included the laboratory-scale pyrolysis of poultry manure at the temperatures of 425-725 °C; the determination of selected physico-chemical and physical properties of the obtained biochars, including the contaminants; and the assessment of the potentials of produced biochars to be used as peat substitutes. PMBs contained less than 36% of total organic carbon (TOC). The contents of P and K were about 2.03-3.91% and 2.74-5.13%, respectively. PMBs did not retain N. They can be safely used as the concentrations of heavy metals, polycyclic aromatic hydrocarbons (PAHs), polychlorinatd biphenyls (PCBs), dioxins, and furans are within the permissible values (except for Cr). Due to high pH (9.24-12.35), they can have a liming effect. High water holding capacity (WHC) in the range of 158-232% w/w could allow for the maintenance of moisture in the growing media. PMBs obtained at 525 °C, 625 °C, and 725 °C showed required stability (H/Corg < 0.7).

The role of hydrochloric acid pretreated activated carbon in chain elongation of D-lactate to caproate: Adsorption and facilitation

Medium chain fatty acids (MCFA) generation is attracting growing interest due to fossil fuel depletion. To promote the production of MCFA, especially caproate, hydrochloric acid pretreated activated carbon (AC) was introduced into chain elongation fermentation. In this study, the role of pretreated AC on caproate production was investigated using lactate and butyrate as electron donor and electron acceptor, respectively. The results showed that AC did not improve the chain elongation reaction at beginning but promoted the caproate production at later stage. The addition of 15 g/L AC facilitated reactor reaching the peak of caproate concentration (78.92 mM), caproate electron efficiency (63.13%), and butyrate utilization rate (51.88%). The adsorption experiment revealed a positive correlation between the adsorption capacity of pretreated AC and the concentration as well as the carbon chain length of carboxylic acids. Moreover, the adsorption of undissociated caproate by pretreated AC contributed to a mitigated toxicity towards microorganisms, thereby facilitating the production of MCFA. Microbial community analysis revealed an increasing enrichment of key functional chain elongation bacteria, including Eubacterium, Megasphaera, Caproiciproducens, and Pseudoramibacter, but a suppression on acrylate pathway microorganism Veillonella, as the dosage of pretreated AC increasing. The findings of this study demonstrated the substantial impact of the adsorption effect of acid-pretreated AC on promoting caproate production, which would aid to the development of more efficient caproate production process.

Biochar integrated reactive filtration of wastewater for P removal and recovery, micropollutant catalytic oxidation, and negative CO2 e: Process operation and mechanism

Biochar (BC) use in water treatment is a promising approach that can simultaneously help address societal needs of clean water, food security, and climate change mitigation. However, novel BC water treatment technology approaches require operational testing in field pilot-scale scenarios to advance their technology readiness assessment. Therefore, the objective of this study is to evaluate the system performance of BC integrated into hydrous ferric oxide reactive filtration (Fe-BC-RF) with and without catalytic ozonation (CatOx) process in laboratory and field pilot-scale scenarios. For this investigation, Fe-BC-RF and Fe-CatOx-BC-RF pilot-scale trials were conducted on synthetic lake water variants and at three municipal water resource recovery facilities (WRRFs) at process flows of 0.05 and 0.6 L/s, respectively. Three native and two iron-modified BCs were used in these studies. The commercially available reactive filtration process (Fe-RF without BC) had 96%-98% total phosphorus (TP) removal from 0.075- and 0.22-mg/L TP, as orthophosphate process influent in these trials. With BC integration, phosphorus removal yielded 94%-98% with the same process-influent conditions. In WRRF field pilot-scale studies, the Fe-CatOx-BC-RF process removed 84%-99% of influent total phosphorus concentrations that varied from 0.12 to 8.1 mg/L. Nutrient analysis on BC showed that the recovered BC used in the pilot-scale studies had an increase in TP from its native concentration, with the Fe-amended BC showing better P recovery at 110% than its unmodified state, which was 16%. Lastly, the field WRRF Fe-CatOx-BC-RF process studies showed successful destructive removals at >90% for more than 20 detected micropollutants, thus addressing a critical human health and environmental water quality concern. The research demonstrated that integration of BC into Fe-CatOx-RF for micropollutant removal, disinfection, and nutrient recovery is an encouraging tertiary water treatment technology that can address sustainable phosphorus recycling needs and the potential for carbon-negative operation. PRACTITIONER POINTS: A pilot-scale hydrous ferric oxide reactive sand filtration process integrating biochar injection typically yields >90% total phosphorus removal to ultralow levels. Biochar, modified with iron, recovers phosphorus from wastewater, creating a P/N nutrient upcycled soil amendment. Addition of ozone to the process stream enables biochar-iron-ozone catalytic oxidation demonstrating typically excellent (>90%) micropollutant destructive removals for the compounds tested. A companion paper to this work explores life cycle assessment (LCA) and techno-economic analysis (TEA) to explore biochar water treatment integrated reactive filtration impacts, costs, and readiness. Biochar use can aid in long-term carbon sequestration by reducing the carbon footprint of advanced water treatment in a dose-dependent manner, including enabling an overall carbon-negative process.

Biochar preparation and evaluation of its effect in composting mechanism: A review

This article provides an overview of biochar application for organic waste co-composting and its biochemical transformation mechanism. As a composting amendment, biochar work in the adsorption of nutrients, the retention of oxygen and water, and the promotion of electron transfer. These functions serve the micro-organisms (physical support of niche) and determine changes in community structure beyond the succession of composing primary microorganisms. Biochar mediates resistance genes, mobile gene elements, and biochemical metabolic activities of organic matter degrading. The participation of biochar enriched the α-diversity of microbial communities at all stages of composting, and ultimately reflects the high γ-diversity. Finally, easy and convincing biochar preparation methods and characteristic need to be explored, in turn, the mechanism of biochar on composting microbes at the microscopic level can be studied in depth.

Pyrolysis of Sugarcane (Saccharum officinarum L.) Leaves and Characterization of Products

The finite nature, regional availability, and environmental problems associated with the use of fossil fuels have forced all countries of the world to look for renewable eco-friendly alternatives. Agricultural waste biomasses, generated through the cultivation of cereal and noncereal crops, are being considered renewable and viable alternatives to fossil fuels. In view of this, there has been a global spurt in research efforts for using abundantly available agricultural wastes as feedstocks for obtaining energy and value-added products through biochemical and thermal conversion routes. In the present work, the thermochemical characteristics and thermal degradation behavior of sugarcane leaves (SCL) and tops were studied. The batch pyrolysis was carried out in a fixed-bed tubular reactor to obtain biochar, bio-oil, and pyrolytic gas. Effects of bed height (4-16 cm), particle size (0.180-0.710 mm), heating rate (15-30 °C/min), and temperature (350-650 °C) were investigated. The maximum yields of bio-oil (44.7%), biogas (36.67%), and biochar (36.82%) were obtained at 550, 650, and 350 °C, respectively, for a 16 cm deep bed of particles of size 0.18-0.30 mm at the heating rate of 25 °C/min. The composition of bio-oil was analyzed using Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR), and gas chromatography-mass spectrometry (GC-MS) techniques. Several aliphatic, aromatic, phenolic, ketonic, and other acidic compounds were found in the bio-oil. The biochar had a highly porous structure and several micronutrients, making it useful as a soil conditioner. In the middle temperature ranges, biogas had more methane and CO and less hydrogen, but at higher temperatures, hydrogen was predominant.

The effects of biochar on antibiotic resistance genes (ARGs) removal during different environmental governance processes: A review

Antibiotic resistance genes (ARGs) pollution has been considered as one of the most significant emerging environmental and health challenges in the 21st century, many efforts have been paid to control the proliferation and dissemination of ARGs in the environment. Among them, the biochar performs a positive effect in reducing the abundance of ARGs during different environmental governance processes and has shown great application prospects in controlling the ARGs. Although there are increasing studies on employing biochar to control ARGs, there is still a lack of review paper on this hotspot. In this review, firstly, the applications of biochar to control ARGs in different environmental governance processes were summarized. Secondly, the processes and mechanisms of ARGs removal promoted by biochar were proposed and discussed. Then, the effects of biochar properties on ARGs removal were highlighted. Finally, the future prospects and challenges of using biochar to control ARGs were proposed. It is hoped that this review could provide some new guidance for the further research of this field.

Biochar application improves karstic lime soil physicochemical properties and enzymes activity and enhances sweet tea seedlings physiological performance

Karst lime soil, commonly found in rocky desert ecosystems of Southwest China, exhibits high pH, poor water retention, and intense erosion. To prevent further soil erosion and soil losses from these ecosystems, stabilization measures based on improved green infrastructure are needed. The present study aimed at elucidating the performance of sweet tea (Lithocarpus polystachyus) seedlings grown on this soil type upon biochar application. Biochar was classified into different particle sizes, viz. 0.25-0.5 mm (medium), 0.5-1 mm (coarse), 1-2 mm (gravel), and their mixture, and added at the concentrations of 1, 2, or 5% soil mass. The pH, moisture, and porosity of soil increased upon biochar application compared to control; however, soil bulk density significantly decreased. The activity of soil phosphatase was increased by biochar particle size. Biochar particle size and concentration significantly enhanced the soil organic carbon content, but they differently affected total and plant-available nutrients in the soil. Light-saturated photosynthesis was positively affected, while stomatal conductance, leaf transpiration, and the intercellular CO₂ concentrations of sweet tea leaves were negatively affected by biochar particle size and/or concentration compared to control. Leaf chlorophyll and soluble protein contents were increased by biochar application. From these results, we conclude that biochar can improve soil properties and the performance of sweet tea seedlings grown on Karst lime soil. We suggest its application at a concentration of 2% soil mass for keeping a high physiological performance of sweet tea seedlings in this environment. The selection of the ideal particle size is context-specific and depends on the target outcome.

Influence of Densification on the Pyrolytic Behavior of Agricultural Biomass Waste and the Characteristics of Pyrolysis Products

TG/FT-IR techniques, UV-spectroscopy, microwave extraction, XRD and SEM were used to study how densification of the three types of agricultural biomass wastes (wheat straw, soft wood, and sunflower husk) changes the composition and structure of their pyrolysis products. It was determined that densification changes the composition of volatile products of pyrolysis at the temperature of 420 °C: sunflower husk emits 4.9 times less saturated and unsaturated hydrocarbons and 1.9 times less compounds with carbonyl group; soft wood emits 1.8 times more saturated and unsaturated hydrocarbons and compounds with carbonyl groups and 1.3 times more alcohols and phenols; and wheat straw emits 2 times more compounds with carbonyl groups. These changes are probably caused by the differences in interaction of formed volatiles with the surface of chars. These differences can be caused by distinct places of cumulation of inorganic components in the densified samples. In the densified char, the inorganics cumulate on the surface of sunflower husk whereas for wheat straw they cumulate inside the sample. In the case of soft wood, the inorganics cumulate both inside and on the surface. The decreased contribution of hydrocarbons in volatiles can be connected with the morphology of nano-particles formed in inorganics.

Adsorption of norfloxacin from aqueous solution on biochar derived from spent coffee ground: Master variables and response surface method optimized adsorption process

In this study, biochar derived from spent coffee grounds (SCGB) was used to adsorb norfloxacin (NOR) in water. The biochar properties were interpreted by analysis of the specific surface area, morphology, structure, thermal stability, and functional groups. The impacts of pH, NOR, and ion's present on SCGB performance were examined. The NOR adsorption mode of SCGB is best suited to the Langmuir model (R² = 0.974) with maximum absorption capacity (69.8 mg g^-1). By using a Response Surface Method (RSM), optimal adsorption was also found at pH of 6.26, NOR of 24.69 mg L^-1, and SCGB of 1.32 g L^-1. Compared with biochars derived from agriculture such as corn stalks, willow branches, potato stem, reed stalks, cauliflower roots, wheat straw, the NOR adsorption capacity of SCGB was 2-30 times higher, but less than 3-4 times for biochars made from Salix mongolica, luffa sponge and polydopamine microspheres. These findings reveal that spent coffee grounds biochar could effectively remove NOR from aqueous solutions. Approaching biochar derived from coffee grounds would be a promising eco-friendly solution because it utilizes solid waste, saves costs, and creates adsorbents to deal with emerging pollutants like antibiotics.

High-performance biochar derived from the residue of Chaga mushroom (Inonotus obliquus) for pollutants removal

A high-performance biochar derived from the residue of Chaga mushroom (Inonotus obliquus) was reported in this study. Inonotus obliquus residues were used to prepare biochar, and the optimal synthesis conditions were obtained by response surface methodology. The specific surface area, pore volume, and average pore size of the optimal biochar (Zn-IORBC) was 1676.78 m²/g, 1.87 cm³/g, and 3.88 nm, respectively. Methylene blue (MB) and tetracycline (TC) were selected to estimate the adsorption performance of Zn-IORBC. The adsorption process was suitable for the pseudo-second-order model and Langmuir model. Zn-IORBC could maintained a large amount of TC adsorption (the lowest value was 686.20 mg/g in mountain spring water) in different natural water. The maximum adsorption capacity of TC and MB was 947.42 and 1033.66 mg/g. The adsorption mechanism was contributed to the electrostatic attraction, hydrogen bonding, π-π interactions, and pore-filling. Zn-IORBC is an effective adsorbent for high-performance pollutants removal.

Beneficial Effect of Biochar on Irrigated Dwarf-Green Coconut Tree

The coconut tree is considered one of the greatest consumers of irrigation water, ranging from 100 to 240 L day−1. The objective of the present study was to evaluate the effect of biochar application on decreased irrigation water needs in a 2-year irrigated dwarf coconut palm orchard field experiment. Biochar was characterized chemically and by electron microscope images. Biochar morphology presented several micropores indicating water retention potential. Amounts of biochar were tested (0, 5, 10, 20, 40 g of biochar per kg of soil), representing 0.0; 0.5; 1.0; 2.0; and 4.0 kg per plant. Micro sprinkler irrigation started following the planting of the 90-day old hybrid dwarf coconut seedlings. The impacts of the application of the biochar on the chemical attributes of the soil, biometry of the coconut plants, water storage in the 0–0.3 m soil layer, and the volume of irrigation water required by treatment were evaluated. After two years (2017 and 2018), the application of the biochar resulted in no statistically significant differences in the chemical attributes of the soil and biometric variables of plants between different treatments. The volume of annual irrigation water per plant versus biochar quantity demonstrated a decreasing effect, due to the increase of soil water storage. The dose of 40 g of biochar per kg of soil presented the highest two-year average soil water retention (0–0.3 m layer) among treatments (34, 36, 34, 38, and 45 mm, respectively), resulting in lower 2-year irrigation water demand (28, 36, 29, 28 and 20 L plant−1 day−1, respectively).

Biochar enhanced high-solid mesophilic anaerobic digestion of food waste: Cell viability and methanogenic pathways

The underlying mechanisms of biochar enhance high-solid anaerobic digestion (HSAD) of food waste were investigated with a focus on the cell viability, microbial community, and methanogenic pathways. This study assessed the effects of different dosages of biochar in HSAD. Optimal biochar dosage was found to be 25 g/L, which produced accumulative methane yields of up to 251 mL CH₄/g VS significantly promote volatile fatty acid degradations, especially in butyric acid concentrations. Effects of biochar with a dosage of 25 g/L on the cell viability showed that viable cells based on cell membrane integrity increased from 2.9% to 6.4%. Meanwhile, intact and highly active cells with high DNA content were probably involved in direct interspecies electron transfer (DIET) via membrane-bound electron transport proteins. Further analysis demonstrated that Syntrophomonas and methanogens Methanosarcina &Methanocelleus were selectively enriched by biochar, which resulted in the methanogenic pathways shifting from acetoclastic/hydrogenotrophic methanogenic pathways to more metabolically diverse methanogenic pathways. Accordingly, biochar-mediated DIET was possibly established between Syntrophomonas and Methanosarcina species due to those viable cells. In conclusion, biochar is a feasible additive in enhancing HSAD methanogenic performance.

Post-processing of biochars to enhance plant growth responses: a review and meta-analysis

A number of processes for post-production treatment of "raw" biochars, including leaching, aeration, grinding or sieving to reduce particle size, and chemical or steam activation, have been suggested as means to enhance biochar effectiveness in agriculture, forestry, and environmental restoration. Here, I review studies on post-production processing methods and their effects on biochar physio-chemical properties and present a meta-analysis of plant growth and yield responses to post-processed vs. "raw" biochars. Data from 23 studies provide a total of 112 comparisons of responses to processed vs. unprocessed biochars, and 103 comparisons allowing assessment of effects relative to biochar particle size; additional 8 published studies involving 32 comparisons provide data on effects of biochar leachates. Overall, post-processed biochars resulted in significantly increased average plant growth responses 14% above those observed with unprocessed biochar. This overall effect was driven by plant growth responses to reduced biochar particle size, and heating/aeration treatments. The assessment of biochar effects by particle size indicates a peak at a particle size of 0.5-1.0 mm. Biochar leachate treatments showed very high heterogeneity among studies and no average growth benefit. I conclude that physiochemical post-processing of biochar offers substantial additional agronomic benefits compared to the use of unprocessed biochar. Further research on post-production treatments effects will be important for biochar utilization to maximize benefits to carbon sequestration and system productivity in agriculture, forestry, and environmental restoration.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s42773-021-00115-0.

The effect of particle size of bamboo biochar on the phytoremediation of Salix psammophila C. to multi-metal polluted soil

Biochar shows great potential in soil remediation. The benefits of biochar on soil depend onits intrinsic properties and soil characteristics. However, the influence of particle sizes of biochar on soil remediation is not clear. In a pot experiment, we evaluated the effects of bamboo biochar (BBC) particle sizes (P1 < 0.15 mm, 0.15 mm < P2 < 0.25 mm, 0.25 mm < P3 < 0.50 mm) on phytoremediation efficiency of Salix psammophila C. cultivated in multi-metal polluted soil. We added the BBC at 3% (w/w) in tested soil. Next, the BBC was thoroughly mixed with soil and weighting to the pot, and S. psammophila cuttings were planted and grown for six months in the amended soil under model growth condition.Results revealed the addition of different sizes of BBC particles affected soil quality, plant growth, and HMs accumulation in plants. All sizes of BBC treatments improved Cd and Zn accumulation, whereas plants in P2 treatment showed the greatest accumulation, increased by 52.41 and 25.55% compared with the control (1,503 and 19,928 μg·plant^-1). Overall, the results indicated BBC enhanced the phytoremediation efficiency of S. psammophila. Plants cultivated in P2 treatment showed the most significant effect on remediating contaminated soil.

Effect of pyrolysis temperature and correlation analysis on the yield and physicochemical properties of crop residue biochar

The aim of this study was to evaluate how pyrolysis temperature influences the yield and physicochemical properties of biochar. We produced biochar from four feedstocks (wheat straw, corn straw, rape straw, and rice straw) pyrolyzed at 300, 400, 500, and 600 °C for 1 h, respectively. The results showed that all biochar yields decreased consistently with increasing temperature during pyrolysis and showed a steady decrease over 400 °C. Rice straw derived biochar had high yield superiority due to its higher content of ash. Pyrolysis temperature has significant effects on the properties of biochar; demonstrating a negative relationship with H, O, H/C, O/C, (O + N)/C, and functional groups, whilst having a positive relationship with C, ash, pH, electrical conductivity, and surface roughness. Higher pyrolysis temperature was beneficial to the formation of a more recalcitrant constitutions and crystal structure, making it available for material application.

Plant Nutrient Availability and pH of Biochars and Their Fractions, with the Possible Use as a Component in a Growing Media

Biochar has the potential to be used as a growing media component, and therefore plays a role in reducing peat usage. It has unique properties apart from the ability to sequester carbon. Here we investigated the nutrient contents of four commercial biochars and their fractions. The biochars’ feedstock was wood waste, except for one with paper fibres and husk. The fine or finer fractions in wood waste biochars contained higher levels of nutrients that were available to plants. The coarse fraction of the biochar derived from husk and paper fibre feedstock had a higher level of total N, P and K in contrast to the other three biochars. The pH of the finer fraction (pH of 9.08) was also higher compared with coarse fraction (pH of 8.71). It is important that when biochar a is used as a component of a peat based growing media, particle size information should be provided, as fractions from the same biochar can have different levels of total extractable nutrients and pH levels. If biochar is used to replace or reduce lime application rates of a peat-biochar mixtures, one must take into account the levels of total and extractable Ca and Mg levels, as these can vary. The variation of these elements was not only between biochars’ feedstocks, even at similar pH-values, but within different fractions in the same biochar. We concluded that biochars should be characterized from the feedstock as well as from the particle size aspect, as it could have a profound effect on nutrient availability of Ca and Mg. This could lead to nutrient imbalances in cultivating plants on substrate mixtures. In addition to nutrient ratios, the suitable pH-level for a given grown species should be adjusted.

Effects of Hardwood Biochar on Methane Production, Fermentation Characteristics, and the Rumen Microbiota Using Rumen Simulation

Biochar is a novel carbonized feed additive sourced from pyrolyzed biomass. This compound is known to adsorb gasses and carbon, participate in biological redox reactions and provide habitat biofilms for desirable microbiota proliferation. Therefore, biochar holds potential to modify rumen fermentation characteristics and reduce enteric CH4 emissions. The objective of this study was to investigate the effect of hardwood biochar supplementation on fermentation parameters, methane (CH4) production and the ruminal archaeal, bacterial, and fungal microbiota using the in vitro RUSITEC (rumen simulation technique) system. Treatments consisted of a control diet (oaten pasture: maize silage: concentrate, 35:35:30 w/w) and hardwood biochar included at 400 or 800 mg per day (3.6 and 7.2% of substrate DM, respectively), over a 15-day period. Biochar supplementation had no effect (P ≥ 0.37) on pH, effluent (mL/d), total gas (mL/d), dry matter (DM) digestibility or CH4 production (mg/d). The addition of 800 mg biochar per day had the tendency (P = 0.10) to lower the % of CH4 released in fermentation compared to 400 mg/d biochar treatment. However, no effect (P ≥ 0.44) was seen on total VFA, acetate, propionate, butyric, branched-chain VFA, valerate and caproate production and the ratio of acetate to propionate. No effect (P > 0.05) was observed on bacterial, archaeal or fungal community structure. However, biochar supplementation at 800 mg/d decreased the abundance of one Methanomethylophilaceae OTU (19.8-fold, P = 0.046) and one Lactobacillus spp. OTU (31.7-fold, P < 0.01), in comparison to control treatments. Two fungal OTUs classified as Vishniacozyma victoriae (5.4 × 107 increase) and Sporobolomyces ruberrimus (5.4 × 107-fold increase) were more abundant in the 800 mg/d biochar samples. In conclusion, hardwood biochar had no effects on ruminal fermentation characteristics and may potentially lower the concentration of enteric CH4 when included at higher dosages by manipulating ruminal microbiota abundances.

Experimental process parameters optimization and in-depth product characterizations for teak sawdust pyrolysis

Pyrolysis is an efficient thermochemical route to obtain biofuels in the form of bio-oil, biochar and pyrolytic gas from the processing of biomass. Pyrolysis experiments were performed with teak sawdust to determine the yield and main characteristics of solid, liquid and gaseous products. Experiments were carried out in the temperature range of 400-700 °C in 100 °C intervals, nitrogen flow rate of 150-250 mL/min, packed bed height in between 2 and 8 cm and particle size in between 0.18 and 0.60 mm. The maximum bio-oil and biochar yield were observed at 600 °C (48.8%) and 400 °C (37.42%), respectively. Physical properties (viscosity, density, carbon residue, pH and HHV) of bio-oil were determined and the chemical properties were investigated using FTIR and GC-MS. Further, biochar was characterized with proximate, ultimate, HHV, FTIR, SEM-EDX, BET surface area and XRD analysis. Non-condensable gases coming out during pyrolysis were analyzed using gas chromatography and amount of H₂, CH₄, CO and CO₂ were determined. According to characterization results, bio-oil can be used as biofuel after up gradation or as source of valuable chemicals, biochar can be utilized as solid fuel or seems to be suitable in waste stream purification as it has very high BET surface area. In addition, pyrolytic gases have significant amount of methane and hydrogen that provides good combustion properties.

Biochar Particle Size and Post-Pyrolysis Mechanical Processing Affect Soil pH, Water Retention Capacity, and Plant Performance

It has become common practice in soil applications of biochar to use ground and/or sieved material to reduce particle size and so enhance mixing and surface contact between soils and char particles. Smaller particle sizes of biochars have been suggested to enhance liming effects and nutrient exchange, and potentially to increase water storage capacity; however, data remains scarce and effects on plant growth responses have not been examined. We manipulated biochar particle size by sieving or grinding to generate particles in two size ranges (0.06–0.5 mm and 2–4 mm), and examined effects on soil pH, soil water retention, and plant physiological and growth performance of two test species (ryegrass: Lolium multiflorum, and velvetleaf: Abutilon theophrasti) grown in a granitic sand culture. The small particle sieved biochar had the largest liming effect, increasing substrate pH values by an additional ~0.3 pH units compared to other biochars. Small particle size biochar showed enhanced water retention capacity, and sieved biochars showed 91%–258% larger water retention capacity than ground biochars of similar particle size, likely because sieved particles were more elongated than ground particles, and thus increased soil interpore volume. The two plant species tested showed distinct patterns of response to biochar treatments: ryegrass showed a better growth response to large biochar particles, while velvetleaf showed the highest response to the small, sieved biochar treatment. We show for the first time that post-processing of biochars by sieving and grinding has distinct effects on biochar chemical and physical properties, and that resulting differences in properties have large but strongly species-specific effects on plant performance in biochar-amended substrates.