Identification of biofilm formation and exoelectrogenic population structure and function with graphene/polyanliline modified anode in microbial fuel cell

A biocompatible electrode/exoelectrogens interface augments bidirectional electron transfer and bioelectrochemical reactions

Bidirectional electron transfer is about that exoelectrogens produce bioelectricity via extracellular electron transfer at anode and drive cytoplasmic biochemical reactions via extracellular electron uptake at cathode. The key factor to determine above bioelectrochemical performances is the electron transfer efficiency under biocompatible abiotic/biotic interface. Here, a graphene/polyaniline (GO/PANI) nanocomposite electrode specially interfacing exoelectrogens (Shewanella loihica) and augmenting bidirectional electron transfer was conducted by in-situ electrochemical modification on carbon paper (CP). Impressively, the GO/PANI@CP electrode tremendously improved the performance of exoelectrogens at anode for wastewater treatment and bioelectricity generation (about 54 folds increase of power density compared to blank CP electrode). The bacteria on electrode surface not only showed fast electron release but also exhibited high electricity density of extracellular electron uptake through the proposed direct electron transfer pathway. Thus, the cathode applications of microbial electrosynthesis and bio-denitrification were developed via GO/PANI@CP electrode, which assisted the close contact between microbial outer-membrane cytochromes and nanocomposite electrode for efficient nitrate removal (0.333 mM/h). Overall, nanocomposite modified electrode with biocompatible interfaces has great potential to enhance bioelectrochemical reactions with exoelectrogens.

High-performance anode electrocatalyst of MnCo2S4-Co4S3/bamboo charcoal for stimulating power generation in microbial fuel cell

Microbial fuel cell (MFC) is a promising technology for recovering energy in wastewater through bacterial metabolism. However, it always suffers from low power density and electron transfer efficiency, restricting the application. This study fabricated the MnCo2S4-Co4S3/bamboo charcoal (MCS-CS/BC) through an easy one-step hydrothermal method, and the material was applied to carbon felt (CF) to form high-performance MFC anode. MCS-CS/BC-CF anode exhibited lower Rct (10.1 Ω) than BC-CF (17.24 Ω) and CF anode (116.1 Ω), exhibiting higher electrochemical activity. MCS-CS/BC-CF anode promoted the electron transfer rate and resulted in enhanced power density, which was 9.27 times higher (980 mW m-2) than the bare CF (105.7 mW m-2). MCS-CS/BC-CF anode showed the best biocompatibility which attracted distinctly larger biomass (146.27 mg/μL) than CF (20 mg/μL) and BC-CF anode (20.1 mg/μL). The typical exoelectrogens (Geobacter and etc.) took dramatically higher proportion on MCS-CS/BC-CF anode (59.78%) than CF (2.99%) and BC-CF anode (26.67%). In addition, MCS-CS/BC stimulated the synergistic effect between exoelectrogens and fermentative bacteria, greatly favouring the extracellular electron transfer rate between bacteria and the anode and the power output. This study presented an efficient way of high-performance anode electrocatalyst fabrication for stimulating MFC power generation, giving suggestions for high-efficient energy recovery from wastewater.

Preparation of PANI-SA/CF anode to enhance the remediation and power generation capabilities of plant microbial fuel cells for chromium contaminated soil

Plant microbial fuel cells (PMFCs) has important value for soil remediation and power generation. To improve the performance of PMFCs, a PMFC experimental system was established based on potted scindapsus aureus. Polyaniline (PANI) and sodium alginate (SA) were used as modifiers to prepare PANI-SA modified carbon felt anode. The soil remediation ability and electricity generation ability of PMFCs with four different anodes were compared and analyzed. The experimental results show that the steady-state voltage, the removal rate of hexavalent chromium, and the total chromium removal rate of PMFC using PANI-SA modified anode were 5.25 mV, 98%, and 90%, respectively, which are 253%, 10.4%, and 10% higher than those of PMFCs using unmodified carbon felt anode. PMFC is effective and feasible for removing soil chromium pollution and achieving efficient soil remediation, while modifying anodes with PANI-SA can further improve the soil remediation and electricity generation capabilities of PMFC.

Electrochemical promotion of organic waste fermentation: Research advances and prospects

The current methods of treating organic waste suffer from limited resource usage and low product value. Research and development of value-added products emerges as an unavoidable trend for future growth. Electro-fermentation (EF) is a technique employed to stimulate cell proliferation, expedite microbial metabolism, and enhance the production of value-added products by administering minute voltages or currents in the fermentation system. This method represents a novel research direction lying at the crossroads of electrochemistry and biology. This article documents the current progress of EF for a range of value-added products, including gaseous fuels, organic acids, and other organics. It also presents novel value-added products, such as 1,3-propanediol, 3-hydroxypropionic acid, succinic acid, acrylic acid, and lysine. The latest research trends suggest a focus on EF for cogeneration of value-added products, studying microbial community structure and electroactive bacteria, exploring electron transfer mechanisms in EF systems, developing effective methods for nutrient recovery of nitrogen and phosphorus, optimizing EF conditions, and utilizing biosensors and artificial neural networks in this area. In this paper, an analysis is conducted on the challenges that currently exist regarding the selection of conductive materials, optimization of electrode materials, and development of bioelectrochemical system (BES) coupling processes in EF systems. The aim is to provide a reference for the development of more efficient, advanced, and value-added EF technologies. Overall, this paper aims to provide references and ideas for the development of more efficient and advanced EF technology.

Simultaneous naphthalene degradation and electricity production in a biowaste-powered microbial fuel cell

Naphthalene is a very common and hazardous environmental pollutant, and its biodegradation has received serious attention. As demonstrated in this study, naphthalene-contaminated wastewater can be biodegraded using a microbial fuel cell (MFC). Furthermore, the potential of MFC for electricity generation appears to be a promising technology to meet energy demands other than those produced from fossil fuels. Nowadays, efforts are being made to improve the overall performance of MFC by integrating biowaste materials for anode fabrication. In this study, palm kernel shell waste was used to produce palm kernel shell-derived graphene oxide (PKS-GO) and palm kernel shell-derived reduced graphene oxide (PKS-rGO), which were then fabricated into anode electrodes to improve the system's electron mobilization and transport. The MFC configuration with the PKS-rGO anode demonstrated greater energy production potential, with a maximum power density of 35.11 mW/m2 and a current density of 101.76 mA/m2, compared to the PKS-GO anode, which achieved a maximum power density of 17.85 mW/m2 and a current density of 72.56 mA/m2. Furthermore, there is simultaneous naphthalene biodegradation with energy production, where the biodegradation efficiency of naphthalene with PKS-rGO and PKS-GO is 85.5%, and 79.7%, respectively. In addition, the specific capacitance determined from the cyclic voltammetry curve revealed a value for PKS-rGO of 2.23 × 10-4 F/g, which is also higher than the value for PKS-GO (1.57 × 10-4 F/g) on the last day of operation. Anodic microbial analysis shows that electrogens thrive in the MFC process. Finally, a comparison with previous literature and the future prospects of the study are also presented.

Environmental biotechnology and the involving biological process using graphene-based biocompatible material

Biotechnology is a promising approach to environmental remediation but requires improvement in efficiency and convenience. The improvement of biotechnology has been illustrated with the help of biocompatible materials as biocarrier for environmental remediations. Recently, graphene-based materials (GBMs) have become promising materials in environmental biotechnology. To better illustrate the principle and mechanisms of GBM application in biotechnology, the comprehension of the biological response of microorganisms and enzymes when facing the GBMs is needed. The review illustrated distinct GBM-microbe/enzyme composites by providing the GBM-microbe/enzyme interaction and the determining factors. There are diverse GBM modifications for distinct biotechnology applications. Each of these methods and applications depends on the physicochemical properties of GBMs. The applications of these composites were mainly categorized as pollutant adsorption, anaerobic digestion, microbial fuel cells, and organics degradation. Where information was available, the strategies and mechanisms of GBMs in improving application efficacies were also demonstrated. In addition, the biological response, from microbial community changes, extracellular polymeric substances changes to biological pathway alteration, may become important in the application of these composites. Furthermore, we also discuss challenges facing the environmental application of GBMs, considering their fate and toxicity in the ecosystem, and offer potential solutions. This research significantly enhances our comprehension of the fundamental principles, underlying mechanisms, and biological pathways for the in-situ utilization of GBMs.

Conductive Polymers and Their Nanocomposites: Application Features in Biosensors and Biofuel Cells

Conductive polymers and their composites are excellent materials for coupling biological materials and electrodes in bioelectrochemical systems. It is assumed that their relevance and introduction to the field of bioelectrochemical devices will only grow due to their tunable conductivity, easy modification, and biocompatibility. This review analyzes the main trends and trends in the development of the methodology for the application of conductive polymers and their use in biosensors and biofuel elements, as well as describes their future prospects. Approaches to the synthesis of such materials and the peculiarities of obtaining their nanocomposites are presented. Special emphasis is placed on the features of the interfaces of such materials with biological objects.

Carbon Fibers for Bioelectrochemical: Precursors, Bioelectrochemical System, and Biosensors

Abstract

Carbon fibers (CFs) demonstrate a range of excellent properties including (but not limited to) microscale diameter, high hardness, high strength, light weight, high chemical resistance, and high temperature resistance. Therefore, it is necessary to summarize the application market of CFs. CFs with good physical and chemical properties stand out among many materials. It is believed that highly fibrotic CFs will play a crucial role. This review first introduces the precursors of CFs, such as polyacrylonitrile, bitumen, and lignin. Then this review introduces CFs used in BESs, such as electrode materials and modification strategies of MFC, MEC, MDC, and other cells in a large space. Then, CFs in biosensors including enzyme sensor, DNA sensor, immune sensor and implantable sensor are summarized. Finally, we discuss briefly the challenges and research directions of CFs application in BESs, biosensors and more fields.

Highlights

CF is a new-generation reinforced fiber with high hardness and strength.Summary precursors from different sources of CFs and their preparation processes.Introduction of the application and modification methods of CFs in BESs and biosensor.Suggest the challenges in the application of CFs in the field of bio-electrochemistry.Propose the prospective research directions for CFs.

Graphical abstract

Functional Nanomaterial-Modified Anodes in Microbial Fuel Cells: Advances and Perspectives

Microbial fuel cell (MFC) is a promising approach that could utilize microorganisms to oxidize biodegradable pollutants in wastewater and generate electrical power simultaneously. Introducing advanced anode nanomaterials is generally considered as an effective way to enhance MFC performance by increasing bacterial adhesion and facilitating extracellular electron transfer (EET). This review focuses on the key advances of recent anode modification materials, as well as the current understanding of the microbial EET process occurring at the bacteria-electrode interface. Based on the difference in combination mode of the exoelectrogens and nanomaterials, anode surface modification, hybrid biofilm construction and single-bacterial surface modification strategies are elucidated exhaustively. The inherent mechanisms may help to break through the performance output bottleneck of MFCs by rational design of EET-related nanomaterials, and lead to the widespread application of microbial electrochemical systems.

Potassium channel blocker selectively enriched Geobacter from mixed-cultured electroactive biofilm: Insights from microbial community, functional prediction and gene expressions

This study investigated the effects of electrical signaling disruption induced by adding tetraethylammonium (TEA, a potassium channel blocker) on the formation of mixed-cultured electroactive biofilms, especially the relative abundance of Geobacter over time. Results showed that TEA addition decelerated the biofilm formation, but selectively enriched Geobacter over time (45.8% on Day 32, 67.7% on Day 60 and 78.1% on Day 90), thus resulting in higher final extracellular electron transfer (EET) efficiency. Redundancy analysis (RDA) confirmed that TEA and operation time were significant factors for the selective enrichment of Geobacter. Moreover, increase in cellular processes and signal processing by PICRUSt analysis indicated adaptive responses of electrogenic biofilms to electrical signaling disruption. Furthermore, qRT-PCR indicated the compensatory roles of key cytochromes and pilA in electrochemical communication, which induced Geobacter enrichment. This work provided a broader understanding of electroactive biofilm regulation and potential applications for electricity generation and biosensor in the future.

Integration of MFC reduces CH4, N2O and NH3 emissions in batch-fed wetland systems

The combination of microbial fuel cells (MFCs) with constructed wetlands (CWs) for enhancing water purification efficiency and generating bioelectricity has attracted extensive attention. However, the other benefits of MFC-CWs are seldom reported, especially the potential for controlling gaseous emissions. In this study, we have quantitatively compared the pollutant removal efficiency and the emission of multiple gases between MFC-CWs and batch-fed wetland systems (BF CWs). MFC-CWs exhibited significantly (p < 0.01) higher COD, NH₄⁺-N, TN, and TP removal efficiencies and significantly (p < 0.01) lower global warming potential (GWP) than BF CWs. The integration of MFC decreased GWP by 23.88% due to the reduction of CH₄ and N₂O fluxes, whereas the CO₂ fluxes were slightly promoted. The quantitative PCR results indicate that the reduced N₂O fluxes in MFC-CWs were driven by the reduced transcription of the nosZ gene and enhanced the ratio of nosZ/(nirS + nirK); the reduced CH₄ fluxes were related to pomA and mcrA. Additionally, the NH₃ fluxes were reduced by 52.20% in MFC-CWs compared to BF CWs. The integration of MFC promoted the diversity of microbial community, especially Anaerolineaceae, Saprospiraceae and Clostridiacea. This study highlights a further benefit of MFC-CWs and provides a new strategy for simultaneously removing pollutants and abating multiple gas emissions in BF CWs.

Synergistically enhanced oxygen reduction reaction and oxytetracycline mineralization by FeCoO/GO modified cathode in microbial fuel cell

The widespread application of antibiotics have aroused serious pollution over the world. Microbial fuel cell (MFC) air cathode was able to simultaneously recover electricity and perform advanced oxidation of pollutions through electro-Fenton (EF). This study synthesized an iron‑cobalt oxide and graphene composite (FeCoO/GO), which possessed high electrochemical activity and ORR catalytic performance. The uniform decoration of FeCoO/GO in MFC air cathode distinctly increased the electricity generation (4.5 times higher than carbon felt) and oxytetracycline (OTC) degradation and detoxification (1.33 times higher). FeCoO/GO boosted the H₂O₂ generation from ORR (1.14 times higher than CF) and mineralization efficiency of OTC (2.63 times higher than CF). UPLC-QTOF-MS verified that OTC was degraded and mineralized through decarboxylation, demethylation, and carbon ring cleavage by the oxidation of ·OH. The enhanced degradation of OTC was not only benefited from the increased ORR catalytic performance, but also the excellent H₂O₂ catalytic activity by Fe and Co for ·OH generation. This study demonstrated an effective strategy by decorating FeCoO/GO in MFC air cathode for the synergistically enhanced ORR and OTC degradation and detoxification, giving promising guidance for the deep removal of antibiotic pollutants in the environment.

Efficient decolorization of azo dye wastewater with polyaniline/graphene modified anode in microbial electrochemical systems

Azo dye pollution has become a worldwide issue, and the current treatment methods can hardly meet the expected emission standards. Microbial electrochemical systems (MESs) show promising applications for decolorization, but their performance critically depends on the microorganisms. Electrode modification is an interesting method of improving decolorization performance. However, the mechanisms of how the modification can affect microbial communities and the decolorization process remain unclear. Here, a modified anode with polyaniline (PANI) and graphene was fabricated via electro-deposition. Consequently, the highest decolorization efficiency was obtained. The Congo red (CR) decolorization rate of the MESs with the PANI/graphene-modified electrode (PG) reached 90% at 54 h. By contrast, the CR decolorization rates of the MESs with the PANI-modified electrode (P) and those of the MESs with the unmodified electrode (C) only reached 68% and 79%, respectively. Results of the microbial community analysis showed abundant Methanobrevibacter arboriphilus in PG (11%), which was 5.5 times that in C (2%) at 18 h. This phenomenon may be related to the rapid decolorization. The upregulated metabolism pathways, including arginine and proline metabolism, purine metabolism, arginine biosynthesis, and riboflavin metabolism, provided more electron shuttles and redox mediators that facilitated the extracellular electron transfer. Therefore, the PG-modified electrode facilitated the decolorization by altering certain metabolic pathways. This study can help to improve the guideline on the potential application of MESs for wastewater treatment.

Bio-electrochemical frameworks governing microbial fuel cell performance: technical bottlenecks and proposed solutions

Microbial fuel cells (MFCs) are recognized as a future technology with a unique ability to exploit metabolic activities of living microorganisms for simultaneous conversion of chemical energy into electrical energy. This technology holds the promise to offer sustained innovations and continuous development towards many different applications and value-added production that extends beyond electricity generation, such as water desalination, wastewater treatment, heavy metal removal, bio-hydrogen production, volatile fatty acid production and biosensors. Despite these advantages, MFCs still face technical challenges in terms of low power and current density, limiting their use to powering only small-scale devices. Description of some of these challenges and their proposed solutions is demanded if MFCs are applied on a large or commercial scale. On the other hand, the slow oxygen reduction process (ORR) in the cathodic compartment is a major roadblock in the commercialization of fuel cells for energy conversion. Thus, the scope of this review article addresses the main technical challenges of MFC operation and provides different practical approaches based on different attempts reported over the years.

Sustainable operation requires addressing key MFC-bottleneck issues. Enhancing extracellular electron transfer is the key to elevated MFC performance.

Modification of hydrochar increased the capacity to promote anaerobic digestion

Hydrochar has been demonstrated to increase methane production rate during anaerobic digestion (AD) of organic wastes/wastewater by facilitating direct interspecies electron transfer (DIET). The present study compared the hydrochars prepared at different conditions (260 °C-1 h, 260 °C-8 h, 320 °C-1 h and 320 °C-8 h) on AD of glucose. Hydrochar prepared at lower temperature and residence time (260 °C-1 h) resulted in the highest methane production rate, which was 237% higher of control experiment without hydrochar. Modification of hydrochar (260 °C-1 h) by ball-milling further increased the capacity to increase methane production rate. Hydrothermal liquefaction (HTL) conditions affected the surface oxygen-containing functional groups that related with DIET, and hydrochar (260 °C-1 h) had higher peaks relating with C-O and O-H functional groups. Ball-milling enhanced the formation of such groups. Microbial analysis showed hydrochar (260 °C-1 h) by ball-milling resulted in the formation of different microbial communities as compared with control experiments, and Azospira and Methanosarcina were enriched, which might be involved in DIET.

Current Progress of Interfacing Organic Semiconducting Materials with Bacteria

Microbial bioelectronics require interfacing microorganisms with electrodes. The resulting abiotic/biotic platforms provide the basis of a range of technologies, including energy conversion and diagnostic assays. Organic semiconductors (OSCs) provide a unique strategy to modulate the interfaces between microbial systems and external electrodes, thereby improving the performance of these incipient technologies. In this review, we explore recent progress in the field on how OSCs, and related materials capable of charge transport, are being used within the context of microbial systems, and more specifically bacteria. We begin by examining the electrochemical communication modes in bacteria and the biological basis for charge transport. Different types of synthetic organic materials that have been designed and synthesized for interfacing and interrogating bacteria are discussed next, followed by the most commonly used characterization techniques for evaluating transport in microbial, synthetic, and hybrid systems. A range of applications is subsequently examined, including biological sensors and energy conversion systems. The review concludes by summarizing what has been accomplished so far and suggests future design approaches for OSC bioelectronics materials and technologies that hybridize characteristic properties of microbial and OSC systems.

Biodegradation and metabolism of tetrabromobisphenol A in microbial fuel cell: Behaviors, dynamic pathway and the molecular ecological mechanism

Tetrabromobisphenol A (TBBPA) has aroused widespread pollution in industrial wastewater. Microbial fuel cell (MFC) was proved powerful in organics degradation and simultaneous resource recovery during wastewater treatment. However, the TBBPA biotransformation potential, pathway and the related molecular mechanism remain poorly understood. In this study, the enhanced degradation and detoxification performance of TBBPA in MFC anode was confirmed, evidenced by the shorter degradation period (2.3 times shorter) and less generation of bisphenol A. UPLC-QTOF-MS analysis verified TBBPA metabolism went through reductive debromination, hydrolytic debromination, oxidative ring cleavage and o-methylation. Accompanied with those biochemical processes, the metabolites underwent dynamic changes. The distinctly decreased abundance and fewer interactions with other functional genera for the potential reductive dehalogenators (Pseudomonas, etc.) possibly led to the suppressed reductive debromination (5.1%) in the closed bioanode. Otherwise, the more abundant potential function bacteria with more collaborated interrelations, including hydrolytic dehalogenators (Acinetobacter, etc.), aromatics degrading bacteria (Geobacter, Holophaga, etc.) and electroactive bacteria (Geobacter, Desulfovibrio, etc.) made great sense to the enhanced hydrolytic debromination and detoxification of TBBPA. This study revealed that MFC anode was beneficial to TBBPA degradation and provided theoretical support for the decomposition and transformation of micro-pollutants in the municipal sewage treatment coupled with MFC process.

Biocatalyst physiology and interplay: a protagonist of MFC operation

Microbial fuel cells (MFC) have been foreseen as a sustainable renewable energy resource to meet future energy demand. In the past, several studies have been executed in both benchtop and pilot scale to produce electrical energy from wastewater. The key role players in this technology that leads to the operation are microbes, mainly bacteria. The dominant among them is termed as "exoelectrogens" that have the capability to produce and transport electron by utilizing waste source. The current review focuses on such electrogenic bacteria's involvement for enhanced power generation of MFC. The pathway of electron transfer in their cell along and its conduction to the extracellular environment of the MFC system are critically discussed. The interaction of the microbes in various MFC operational conditions, including the role of substrate and solid electron acceptors, i.e., anode, external resistance, temperature, and pH, was also discussed in depth along with biotechnological advancement and future research perspective.

Carbon-Based Composites as Anodes for Microbial Fuel Cells: Recent Advances and Challenges

Owing to the low price, chemical stability and good conductivity, carbon-based materials have been extensively applied as the anode in microbial fuel cells (MFCs). In this review, apart from the charge storage mechanism and anode requirements, the major work focuses on five categories of carbon-based anode materials (traditional carbon, porous carbon, nano-carbon, metal/carbon composite and polymer/carbon composite). The relationship is demonstrated in depth between the physicochemical properties of the anode surface/interface/bulk (porosity, surface area, hydrophilicity, partical size, charge, roughness, etc.) and the bioelectrochemical performances (electron transfer, electrolyte diffusion, capacitance, toxicity, start-up time, current, power density, voltage, etc.). An outlook for future work is also proposed.

Microbial Electrochemical Systems: Principles, Construction and Biosensing Applications

Microbial electrochemical systems are a fast emerging technology that use microorganisms to harvest the chemical energy from bioorganic materials to produce electrical power. Due to their flexibility and the wide variety of materials that can be used as a source, these devices show promise for applications in many fields including energy, environment and sensing. Microbial electrochemical systems rely on the integration of microbial cells, bioelectrochemistry, material science and electrochemical technologies to achieve effective conversion of the chemical energy stored in organic materials into electrical power. Therefore, the interaction between microorganisms and electrodes and their operation at physiological important potentials are critical for their development. This article provides an overview of the principles and applications of microbial electrochemical systems, their development status and potential for implementation in the biosensing field. It also provides a discussion of the recent developments in the selection of electrode materials to improve electron transfer using nanomaterials along with challenges for achieving practical implementation, and examples of applications in the biosensing field.

Functionalized conductive activated carbon-polyaniline composite anode for augmented energy recovery in microbial fuel cells

Internal resistance is one of the limiting factors for power production in microbial fuel cells (MFC). To overcome this, current study designed polyaniline functionalized activated carbon (PANi-FAC) composite as capacitive anode with strategic electrocatalytic capability, and was comparatively assessed with SSM-PANi and bare SSM as anodes in three double chambered MFCs respectively. Power output and COD removal efficiency of PANi-FAC coated on stainless steel mesh (SSM-PANi/FAC) is superior (322 mW/m²; 87.6%) in comparison to SSM-PANi (273 mW/m²; 62.4%) and bare SSM (169 mW/m²; 54%). In addition, maximum specific capacitance of hybrid electrodes is relatively high with SSM-PANi/FAC (360.84 F/g) than SSM-PANi anode (128.26 F/g). Nyquist impedance plots showed less charge-transfer resistance (Rct) with SSM-PANi/FAC (29.9 Ω) than SSM-PANi (206.8 Ω) and SSM anodes (678 Ω). Study infers that, development of electrochemical double layer capacitance makes SSM-PANi/FAC, a potential capacitive anode for augmenting bio-electrocatalytic activity and reducing Ohmic losses.

Recent progress of graphene based nanomaterials in bioelectrochemical systems

The application of graphene (Gr) to microbial fuel cells (MFCs) and microbial electrolysis cell (MECs) is considered a very promising approach in terms of enhancing their performance. The superior Gr properties of high electrical and thermal conductivities, along with: superior specific surface area, high electron mobility, and mechanical strength, are the key features that endorse this. Factors impeding the advancement of a microbial fuel cell into commercialization involve primarily the cost of their components, and their production on a small scale. Gr with such outstanding characteristics can help mitigate these challenges, when used as electrode material. The application of Gr as an anode material improves the efficiency of electron transfer and bacterial attachment. When used as a cathode material, it supports the oxygen reduction reaction. This investigation, presents a thorough analysis of the feasibility of Gr as an electrode material in both MFC and MEC applications - based on experimental results from the investigation. Current technological advancements in the implementation of Gr in MFC and MEC are also highlighted in this review. To summarise, the investigation exposes critical issues impeding the advancement of microbial fuel cells, and proposes possible solutions to mitigate these challenges.

Efficacy of electrode position in microbial fuel cell for simultaneous Cr(VI) reduction and bioelectricity production

Microbial fuel cells (MFCs) that are bio-energy transducers capture bioelectricity produced from the oxidation of organic matter by using the electro-active bacteria grown on the biofilm attached on anode. Previous studies explored the effect of several limiting factors, such as electrode material, catalyst type, membrane structure, and electrolyte, on the electrochemical performance of MFCs. However, the effects of electrode position on Cr(VI) reduction and bioelectricity production remain unknown. In this study, MFCs with different electrode positions (i.e., 4 cm (MFC-4), 3 cm (MFC-3), 2 cm (MFC-2), and 1 cm (MFC-1)) were designed and fabricated to evaluate the overall performance of MFCs. The results of electrochemical analysis confirmed that MFC-2 exhibited low exchange transfer resistance (4.9 Ω) and strong conductivity, resulting in optimal electrochemical performance. In addition, Cr(VI) was completely removed within 11 h in MFC-2 with a large reduction rate of 0.91 g/m³·h. and COD removal efficiency of 78.25%. The overall performance of MFC-2 was comparatively higher than those of MFC-1 (0.80 g/m³·h and 68.82%), MFC-3 (0.64 g/m³·h and 61.67%), and MFC-4 (0.52 g/m³·h and 39.85%). Meanwhile, MFC-2 generated high open voltage (1.02 V) and power density (535.4 mW/m²), which are 1.4- and 3.1-fold larger than those of MFC-4 (0.72 V and 171.3 mW/m²). High COD removal and power density indicated the strong electrochemical activity of electroactive bacteria in the anode chamber of the MFCs, which was due to the low resistance in the MFCs could accelerate electron transfer and boost electrochemical reaction. Consequently, the optimal electrode spacing in MFCs was 2 cm. Further studies confirmed that Cr(VI) was removed and deposited in the form of Cr(III) on the electrode surface. High-throughput analysis suggested Pseudomonas species are the key electroactive bacteria for electricity generation.

Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells

Sustainable production of electricity from renewable sources by microorganisms is considered an attractive alternative to energy production from fossil fuels. In recent years, research on microbial fuel cells (MFCs) technology for electricity production has increased. However, there are problems with up-scaling MFCs due to the fairly low power output and high operational costs. One of the approaches to improving energy generation in MFCs is by modifying the existing anode materials to provide more electrochemically active sites and improve the adhesion of microorganisms. The aim of this review is to present the effect of anode modification with carbon compounds, metallic nanomaterials, and polymers and the effect that these modifications have on the structure of the microbiological community inhabiting the anode surface. This review summarizes the advantages and disadvantages of individual materials as well as possibilities for using them for environmentally friendly production of electricity in MFCs.

Application of advanced anodes in microbial fuel cells for power generation: A review

Microbial fuel cells (MFCs) the most extensively described bioelectrochemical systems (BES), have been made remarkable progress in the past few decades. Although the energy and environment benefits of MFCs have been recognized in bioconversion process, there are still several challenges for practical applications on large-scale, particularly for relatively low power output by high ohmic resistance and long period of start-up time. Anodes serving as an attachment carrier of microorganisms plays a vital role on bioelectricity production and extracellular electron transfer (EET) between the electroactive bacteria (EAB) and solid electrode surface in MFCs. Therefore, there has been a surge of interest in developing advanced anodes to enhance electrode electrical properties of MFCs. In this review, different properties of advanced materials for decorating anode have been comprehensively elucidated regarding to the principle of well-designed electrode, power output and electrochemical properties. In particular, the mechanism of these materials to enhance bioelectricity generation and the synergistic action between the EAB and solid electrode were clarified in detail. Furthermore, development of next generation anode materials and the potential modification methods were also prospected.

Degradation pathways, microbial community and electricity properties analysis of antibiotic sulfamethoxazole by bio-electro-Fenton system

Sulfamethoxazole (SMX) is a general antibiotic that is frequently identified in wastewater and surface water. In this study, the degradation and metabolic pathway of SMX by bio-electro-Fenton systems equipped with a CNT/r-FeOOH cathode were investigated. When initial SMX = 25 mg/L, the removal efficiency of SMX reached 94.66% by the bio-electro-Fenton system. The concentrations of sul1, sul2, sul3, sulA, intI1 and 16S rRNA genes were examined in effluents. Four out of the six ARGs analysed were detected. Among all quantified sul genes, sul1 and sulA were the most abundant. High-throughput sequencing revealed that the microbial communities and relative abundance at the phylum and genus levels were affected by different SMX concentrations. In addition, the intermediates were detected and the possible SMX degradation pathway by the bio-electro-Fenton process in the present system was proposed. Furthermore, the highest power density obtained was 283.32 ± 16.35 mW/m² (SMX = 25 mg/L). This study provides an efficient and cost effective method for degrading antibiotics.

Reduced graphene oxide and biofilms as cathode catalysts to enhance energy and metal recovery in microbial fuel cell

In this study, reduced graphene oxide (rGO) was developed and employed as cathode catalyst in a membrane-less microbial fuel cell (MFC) to improve energy and metal (copper) recovery in combined with biofilms. Results showed that rGO-based cathode exhibited better characterizations in structure and electron transfer than graphene oxide (GO)-based cathode. The voltage with rGO was about 67% increased, and Cu²⁺ removal efficiency was 43% improved as compared to GO. Cu species on cathode demonstrated the favorable Cu²⁺ reduction to Cu with the catalysis of rGO. Moreover, microbial community analysis indicated that rGO-based cathode exhibited better biocompatibility for functional bacteria that related to electron transfer and Cu²⁺ resistance, such as Geobacter and Pseudomonas, demonstrating the interspecific synergism of microorganisms for efficient energy and copper recovery. It will be of important significance for the heavy metal and energy recovery from low concentrations wastewater by using microbial fuel cell.