Temporal trends and sediment-water partitioning of per- and polyfluoroalkyl substances (PFAS) in lake sediment

Nationwide occurrence and discharge mass load of per- and polyfluoroalkyl substances in effluent and biosolids: A snapshot from 75 wastewater treatment plants across Australia

Wastewater treatment plants (WWTPs) have been recognized as secondary sources of per- and polyfluoroalkyl substances (PFAS) released into the environment. In this study, PFAS concentrations were measured in effluent and biosolids samples collected from 75 WWTPs across Australia during the 2016 Census period, which covers more than half of the Australian population. Twelve PFAS compounds, including six C5-C10 perfluoroalkyl carboxylic acids (PFCAs), four perfluoro sulfonic acids (PFSAs) such as perfluorobutane sulfonate (PFBS), perfuorohexane sulfonic (PFHxS), perfluorooctane sulfonic acid (PFOS), and perfluorodecane sulfonic acid (PFDS), and one fluorotelomer sulfonic acid (6:2 FTS), were detected in the effluent, with concentrations up to 504 ng/L (PFHxS). Among these, perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA), and perfluoropentanic acid (PFPeA) exhibited the highest median concentrations. In the biosolids, a total of 21 PFAS compounds were detected, encompassing ten C4-C14 PFCAs, four PFSAs, two FTS (6:2 and 8:2 FTS), perfluorooctane sulfonamide (PFOSA), two perfluorooctane sulfonamido acetic acid (NMethyl FOSAA and NEthyl FOSAA), and two perfluorooctane sulfonamido ethanol (FOSE), with dry weight (dw) concentrations approaching 235 ng/g (PFOS). The highest median and mean concentrations were observed for perfluorodecanoic acid (PFDA) and PFOS. An annual discharge of approximately 250 kg of the total 21 PFAS compounds was estimated through the effluent and biosolids of the participating WWTPs. Notably, PFOS and 6:2 FTS constituted the largest proportion of total PFAS in the WWTPs' output. While PFCAs were higher in effluent concentrations compared to influent levels across most WWTPs (92% of WWTPs for ∑8PFCAs), the concentrations of PFSAs either decreased or remained relatively stable (in 80% of WWTPs for ∑4PFSAs) throughout the wastewater treatment process.

Exploring organic and inorganic contaminant histories in sediment cores across the anthropocene: Accounting for site/area dependent factors

Sedimentary records help chronologically identify anthropogenic contamination in environmental systems. This study analysed dated sediment cores from L'Albufera Lake (Valencia, Spain), to assess the occurrence of heavy metals (HMs), polycyclic aromatic hydrocarbons (PAHs), perfluoroalkyl substances (PFASs), organophosphorus flame retardants (OPFRs), pesticides and pharmaceuticals and personal care products (PPCPs). The results evidence the continuing vertical presence of all types of contaminants in this location. The sediment age was difficult to establish. However, the presence of shells together with an historical estimation and the knowledge of sedimentary rates could help. HMs contents are higher in the upper layer reflecting the most recent increase of the industrial and agricultural practices in the area since the middle 20th century. Higher availability index of these HMs in the upper sediment layers is associated with point and diffuse contamination sources in the area. PAHs and OPFRs were homogeneous distributed through the sediments with few exceptions such as phenanthrene in the North and fluoranthene in the South. Perfluorooctanoic acid (PFOA) and perfluorooctanesulfonate (PFOS) were detected throughout the sediment core while short-chain PFASs (except perfluoropentanoic acid (PFPeA)) were detected only in the top layer. Pesticides and PPCPs showed appreciable down-core mobility. The vertical concentration profiles of organic contaminants did not exhibit a clear trend with depth, then, it is difficult to develop a direct relationship between sediment age and contaminant concentrations, and to elucidate the historical trend of contamination based on dated sediment core. Consequently, linking contaminant occurrence in sediments directly to their historical use is somewhat speculative at least in the conditions of L'Albufera Lake.

Relationship between crustacean consumption and serum perfluoroalkyl substances (PFAS): the Korean National Environmental Health Survey (KoNEHS) cycle 4

Background

Perfluoroalkyl substances (PFASs) are non-aromatic organic compounds, whose hydrogen atoms in the carbon chain substituted by fluorine atoms. PFASs exhibit developmental toxicity, carcinogenicity, hepatotoxicity, reproductive toxicity, immunotoxicity, and hormone toxicity. PFASs are used in the production of disposable food packages, aircraft and automobile devices, cooking utensils, outdoor gear, furniture and carpets, aqueous film forming foam (AFFF), cables and wires, electronics, and semiconductors. This study aimed to determine the association between crustacean consumption and serum PFASs.

Methods

Adult participants (2,993) aged ≥ 19 years were extracted from the 4th cycle data of the Korean National Environmental Health Survey (KoNEHS). Based on the 50th percentile concentrations of serum PFASs, participants were divided into the low-concentration group (LC) and the high-concentration group (HC). General characteristics, dietary factors, coated product usage, and personal care product usage, an independent t-test and χ2 test were analyzed. The odds ratio (OR) of serum PFAS concentration against crustacean consumption was estimated via logistic regression analysis adjusting for general characteristics, dietary factors, coated product usage, and personal care product usage.

Results

The OR for the HC of serum PFASs was higher in individuals with ≥once a week crustacean consumption than in those with < once a week crustacean consumption. Estimated ORs were perfluorohexanesulfonic acid 2.15 (95% confidence interval [CI]: 1.53-3.02), perfluorononanoic acid (PFNA) 1.23 (95% CI: 1.07-1.41), and perfluorodecanoic acid (PFDeA) 1.42 (95% CI: 1.17-1.74) in males, and perfluorooctanoic acid 1.48 (95% CI: 1.19-1.84), perfluorooctanesulfonic acid 1.39 (95% CI: 1.27-1.52), PFNA 1.70 (95% CI: 1.29-2.26) and PFDeA 1.43 (95% CI: 1.32-1.54) in females.

Conclusions

This study revealed the association between the crustacean consumption and concentrations of serum PFASs in general Korean population.

Surface modifications of biopolymers for removal of per- and polyfluoroalkyl substances from water: Current research and perspectives

Per- and polyfluoroalkyl substances (PFAS) are highly recalcitrant organic contaminants that have attracted ever-increasing attention from the general public, government agencies and scientific communities. To remove PFAS from water, especially the enormous volume of drinking water, stormwater, and groundwater, sorption is the most practical approach. Success of this approach demands green, renewable, and sustainable materials for capturing PFAS at ng/L or µg/L levels. To meet this demand, this manuscript critically reviewed sorbents developed from biopolymers, such as chitosan (CTN), alginate (ALG), and cellulose (CEL) covering the period from 2008 to 2023. The use of different cross-linkers for the surface modifications of biopolymers were described. The underlying removal mechanism of biosorbents for PFAS adsorption from molecular perspectives was discussed. Besides reviewing and comparing the performance of different bio-based sorbents with respect to environmental factors like pH, and sorption kinetics and capacity, strategies for modifying biosorbents for better performance were proposed. Additionally, approaches for regeneration and reuse of the biosorbents were discussed. This was followed by further discussion of challenges facing the development of biosorbents for PFAS removal.

The sources and bioaccumulation of per- and polyfluoroalkyl substances in animal-derived foods and the potential risk of dietary intake

Per- and polyfluoroalkyl substances (PFAS) have attracted increasing attention due to their environmental persistence and potential toxicity. Diet is one of the main routes of human exposure to PFAS, particularly through the consumption of animal-derived foods (e.g., aquatic products, livestock and poultry, and products derived from them). This review summarizes the source, bioaccumulation, and distribution of PFAS in animal-derived foods and key influential factors. In most environmental media, perfluorooctanoic acid and perfluorooctane sulfonate are the dominant PFAS, with the levels of short-chain PFAS such as perfluorobutyric acid and perfluorohexane sulfonate surpassing them in some watersheds and coastal areas. The presence of PFAS in environmental media is mainly influenced by suspended particulate matter, microbial communities as well as temporal and spatial factors, such as season and location. Linear PFAS with long carbon chains (C ≥ 7) and sulfonic groups tend to accumulate in organisms and contribute significantly to the contamination of animal-derived foods. Furthermore, PFAS, due to their protein affinity, are prone to accumulate in the blood and protein-rich tissues such as the liver and kidney. Species differences in PFAS bioaccumulation are determined by diet, variances in protein content in the blood and tissues and species-specific activity of transport proteins. Carnivorous fish usually show higher PFAS accumulation than omnivorous fish. Poultry typically metabolize PFAS more rapidly than mammals. PFAS exposures in the processing of animal-derived foods are also attributable to the migration of PFAS from food contact materials, especially those in higher-fat content foods. The human health risk assessment of PFAS exposure from animal-derived foods suggests that frequent consumption of aquatic products potentially engender greater risks to women and minors than to adult males. The information and perspectives from this review would help to further identify the toxicity and migration mechanism of PFAS in animal-derived foods and provide information for food safety management.

Analysis of a Passive Sampling Device to Assess the Behavior of Per- and Polyfluoroalkyl Substances in Sediments

Per- and polyfluoroalkyl substances (PFAS) are an emerging class of compounds that cause health and environmental problems worldwide. In aquatic environments, PFAS may bioaccumulate in sediment organisms, which can affect the health of organisms and ecosystems. As such, it is important to develop tools to understand their bioaccumulation potential. In the present study, the uptake of perfluorooctanoic acid (PFOA) and perfluorobutane sulfonic acid (PFBS) from sediments and water was assessed using a modified polar organic chemical integrative sampler (POCIS) as a passive sampler. While POCIS has previously been used to measure time-weighted concentrations of PFAS and other compounds in water, in our study, the design was adapted for analyzing contaminant uptake and porewater concentrations in sediments. The samplers were deployed into seven different tanks containing PFAS-spiked conditions and monitored over 28 days. One tank contained only water with PFOA and PFBS, three tanks contained soil with 4% organic matter, and three tanks contained soil combusted at 550 °C to minimize the influence of labile organic carbon. The uptake of PFAS from the water was consistent with previous research using a sampling rate model or simple linear uptake. For the samplers placed in the sediment, the uptake process was explained well using a mass transport based on the external resistance from the sediment layer. Uptake of PFOS in the samplers occurred faster than that of PFOA and was more rapid in the tanks containing the combusted soil. A small degree of competition was observed between the two compounds for the resin, although these effects are unlikely to be significant at environmentally relevant concentrations. The external mass transport model provides a mechanism to extend the POCIS design for measuring porewater concentrations and sampling releases from sediments. This approach may be useful for environmental regulators and stakeholders involved in PFAS remediation. Environ Toxicol Chem 2023;42:2171-2183. © 2023 SETAC.

Life cycle assessment and life cycle cost analysis of anion exchange and granular activated carbon systems for remediation of groundwater contaminated by per- and polyfluoroalkyl substances (PFASs)

Anion exchange resin (AER) and granular activated carbon (GAC) have emerged as prominent technologies for treatment of waters contaminated with per- and polyfluoroalkyl substances (PFASs). This study compares the life cycle environmental impacts and life cycle costs of remediating PFAS-contaminated groundwater with these competing technologies, using field pilot data to inform model inputs. Comparative analysis indicates that AER systems employing single-use "PFAS-selective" resins have lower environmental impacts and costs than systems using regenerable resins or GAC adsorbents, supporting its use in future remediation efforts. Use of GAC operated as a single-use adsorbent led to the highest emissions as well as the highest treatment costs, with thermally-reactivated GAC proving to be less impactful than regenerable AER treatment. Sensitivity analyses highlighted the dominance of media usage rate (MUR), which is highly dependent on the selected PFAS treatment goals, to determine environmental impacts and costs over a 30-year system life cycle. Selection of very stringent changeout criteria (e.g., detection of any PFASs in effluent) significantly reduces the advantages of single-use resins. For regenerable AER, environmental impacts were dominated by management of the PFAS-contaminated brine/co-solvent waste stream used to regenerate the adsorbent, as well as the cosolvent content of the regenerant mixture and the cosolvent recovery efficiency achieved via on-site distillation. High impacts estimated for GAC adsorption, the result of high MUR relative to ion exchange media, can be significantly reduced if spent adsorbents are reused after thermal reactivation, but impacts are still greater than those predicted for single-use ion exchange systems. Findings are expected to hold across a range of diverse sites, including drinking water systems treating more dilute sources of PFAS contamination, as PFAS breakthrough was not found to be highly sensitive to sourcewater PFAS concentrations.

PFAS surveillance in abiotic matrices within vital aquatic habitats throughout Florida

Per- and polyfluoroalkyl substances (PFAS) are a group of manufactured chemicals that are resistant to degradation and thus persistent in the environment. The presence, uptake, and accumulation of PFAS is dependent upon the physiochemical properties of the PFAS and matrix, as well as the environmental conditions since the time of release. The objective of this study was to measure the extent of PFAS contamination in surface water and sediment from nine vulnerable aquatic systems throughout Florida. PFAS were detected at all sampling locations with sediment exhibiting greater PFAS concentrations when compared to surface water. At most locations, elevated concentrations of PFAS were identified around areas of increased human activity, such as airports, military bases, and wastewater effluents. The results from the present study highlight the ubiquitous presence of PFAS in vital Florida waterways and filled an important gap in understanding the distribution of PFAS in dynamic, yet vulnerable, aquatic environments.

Watershed scale PFAS fate and transport model for source identification and management implications

Developing strategic plans for the remediation and mitigation of pre- and polyfluoroalkyl substances (PFAS) in soil, groundwater, and surface water requires an understanding of the fate and transport of these chemicals on a regional scale. To fill this knowledge gap, we developed a distributed hydrogeochemical model and applied it to a large-scale watershed with various point and non-point sources of a long-chain, highly persistent PFAS compound known as perfluorooctane sulfonic acid (PFOS). The results showed that the developed model could reproduce the spatiotemporal concentration of PFOS across a large and diverse watershed. Herein, our first objective was to quantify the PFOS transport from the unsaturated zone to the groundwater and surface water via leaching, surface runoff, lateral flow, and sediment transport. The second objective was to identify factors influencing PFOS release from confirmed and suspected PFAS sites and urban and agricultural areas. The modeling results show that surface runoff played a significant role in PFOS transport, with urban areas and industrial sites being major contributors. In addition, sediment transport was found to be a notable pathway for PFOS release, particularly from sites with biosolids application. Further analysis revealed the relative importance of topography, soil water retention, and water-solid adsorption factors in determining PFOS transport dynamics at the watershed scale for better source identification and targeted management.

Tissue Bioconcentration Pattern and Biotransformation of Per-Fluorooctanoic Acid (PFOA) in Cyprinus carpio (European Carp)—An Extensive In Vivo Study

The perfluoroalkyl substances (PFAS) represent a persistent class of synthetic chemicals that spread in the environment as a result of industrialization. Due to their bioaccumulative and endocrine disruption implications, these chemicals can affect food quality and human health, respectively. In the present study, the bioconcentration and biotransformation of perfluorooctanoic acid (PFOA) in common carp (Cyprinus carpio) were evaluated in a biphasic system (exposure and depuration). Carp were continuously exposed, under laboratory conditions, to 10 (Experiment 1) and 100 (Experiment 2) µg/L PFOA for 14 weeks, followed by a wash out period of 3 weeks. Fish organs and tissues were collected at 8, 12, 14 weeks of exposure and at week 17, after the depuration period. The results obtained from the LC-MS/MS analysis showed the presence of PFOA in all studied organs. The highest values of PFOA were identified in the gallbladder (up to 2572 ng/g d.w.) in Experiment 1 and in the gallbladder (up to 18,640 ng/g d.w.) and kidneys (up to 13,581 ng/g d.w.) in Experiment 2. The average BCF varied between 13.4 and 158 L/Kg in Experiment 1 and between 5.97 and 80.3 L/Kg in Experiment 2. Four biotransformation products were identified and quantified in all organs, namely: PFBA, PFPeA, PFHxA, and PFHpA. PFBA was proven to be the dominant biotransformation product, with the highest values being determined after 8 weeks of exposure in the kidney, gallbladder, brain, liver, and gonads in both experiments. Because freshwater fish are an important food resource for the human diet, the present study showed the fishes’ capacity to accumulate perfluoroalkyl substances and their metabolites. The study revealed the necessity of monitoring and risk studies of new and modern synthetic chemicals in aquatic resources.

Bioaccumulation of per- and polyfluoroalkyl substances by freshwater benthic macroinvertebrates: Impact of species and sediment organic carbon content

Per- and polyfluoroalkyl substances (PFAS) in aquatic environments have caused global concern due to their persistence, toxicity, and potential bioaccumulation of some compounds. As an important compartment of the aquatic ecosystem, sediment properties impact PFAS partitioning between aqueous and solid phases, but little is known about the influence of sediment organic carbon content on PFAS bioaccumulation in benthic organisms. In this study, three freshwater benthic macroinvertebrates - worms (Lumbriculus variegatus), mussels (Elliptio complanata) and snails (Physella acuta) - were exposed for 28 days to PFAS spiked synthetic sediment equilibrated with a synthetic surface water. Using microcosms, sediment organic carbon content - 2%, 5% and 8% - was manipulated to assess its impact on PFAS bioaccumulation. Worms were found to have substantially greater PFAS bioaccumulation compared to mussels and snails. The bioaccumulation factors (BAFs) and biota sediment accumulation factors (BSAFs) in worms were both one to two magnitudes higher than in mussels and snails, likely due to different habitat-specific uptake pathways and elimination capacities among species. In these experiments, increasing sediment organic carbon content decreased the bioaccumulation of PFAS to benthic macroinvertebrates. In worms, sediment organic carbon content was hypothesized to impact PFAS bioaccumulation by affecting PFAS partitioning and sediment ingestion rate. Notably, the BSAF values of 8:2 fluorotelomer sulfonic acid (FTS) were the largest among 14 PFAS for all species, suggesting that the benthic macroinvertebrates probably have different metabolic mechanisms for fluorotelomer sulfonic acids compared to fish evaluated in published literature. Understanding the impact of species and sediment organic carbon on PFAS bioaccumulation is key to developing environmental quality guidelines and evaluating potential ecological risks to higher trophic level species.

Solvent-Free Nonthermal Destruction of PFAS Chemicals and PFAS in Sediment by Piezoelectric Ball Milling

Studies on the destruction of solid per- and polyfluoroalkyl substances (PFAS) chemicals and PFAS-laden solid wastes significantly lag behind the urgent social demand. There is a great need to develop novel treatment processes that can destroy nonaqueous PFAS at ambient temperatures and pressures. In this study, we develop a piezoelectric-material-assisted ball milling (PZM-BM) process built on the principle that ball collisions during milling can activate PZMs to generate ∼kV potentials for PFAS destruction in the absence of solvents. Using boron nitride (BN), a typical PZM, as an example, we successfully demonstrate the complete destruction and near-quantitative (∼100%) defluorination of solid PFOS and perfluorooctanoic acid (PFOA) after a 2 h treatment. This process was also used to treat PFAS-contaminated sediment. Approximately 80% of 21 targeted PFAS were destroyed after 6 h of treatment. The reaction mechanisms were determined to be a combination of piezo-electrochemical oxidation of PFAS and fluorination of BN. The PZM-BM process demonstrates many potential advantages, as the degradation of diverse PFAS is independent of functional group and chain configurations and does not require caustic chemicals, heating, or pressurization. This pioneering study lays the groundwork for optimizing PZM-BM to treat various PFAS-laden solid wastes.

Calibration of Perfluorinated Alkyl Acid Uptake Rates by a Tube Passive Sampler in Water

Per- and polyfluoroalkyl substances (PFAS) are a group of 4000+ man-made compounds of great concern due to their environmental ubiquity and adverse effects. Despite a general interest, few reliable detection tools for integrative passive sampling of PFAS in water are available. A microporous polyethylene tube with a hydrophilic-lipophilic balance sorbent could serve as a flow-resistant passive sampler for PFAS. The tube's sampling rate, Rs, was predicted based on either partitioning and diffusion, or solely diffusion. At 15 °C, the laboratory measured Rs for perfluorohexanoic acid of 100+/-81 mL day-1 were better predicted by a partitioning and diffusion model (48+/-1.8 mL day-1) across 10-60 cm s-1 water flow speeds (15+/-4.2 mL day-1 diffusion only). For perfluorohexane sulfonate, Rs at 15°C were similarly different (110+/-60 mL day-1 measured, 120+/- 63 versus 12+/-3.4 mL day-1 in respective models). Rs values from field deployments were in-between these estimates (46 +/-40 mL day-1 for perfluorohexanoic acid). PFAS uptake was not different for previously biofouled membranes in the laboratory, suggesting the general applicability of the sampler in environmental conditions. This research demonstrates that the polyethylene tube's sampling rates are sensitive to the parameterization of the models used here and partitioning-derived values should be used.

Distribution of legacy and emerging per- and polyfluoroalkyl substances in riverine and coastal sediments of Southeastern North Carolina, USA

The sediment distribution of per- and polyfluoroalkyl substances (PFAS) along a river to ocean transect was investigated. Samples were collected between September 2017 and October 2019 with targeted quantification of six legacy and replacement PFAS by LC-MS/MS. Total PFAS concentrations ranged from below the LOQ to 7.47 ng per g dry weight with PFOA, PFOS, HFPO-DA and PFMOAA the most frequently detected. Significant correlations (p < 0.05) were found between PFOS and HFPO-DA sedimentary concentration and percent organic carbon (% OC); however, PFOA and PFMOAA were not correlated with sediment % OC. This study highlights the occurrence of the replacement PFAS in sediments for the first time. Sediment extracts were screened for 18 additional PFAS compounds by high resolution mass spectrometry. A series of perfluorinated ether carboxylic acid and perfluorinated ether sulfonic acid with either one or two acidic functional groups were detected at various locations in the upper portion of the Cape Fear River. A series of chromatographically resolved isomers (C₇F₁₃O₅S₁; M-1) were detected and may be Nafion™ degradation products.

Pilot study comparison of regenerable and emerging single-use anion exchange resins for treatment of groundwater contaminated by per- and polyfluoroalkyl substances (PFASs)

This study reports the results of an 8-month pilot study comparing both regenerable and emerging single-use anion exchange resins (AERs) for treatment of per- and polyfluoroalkyl substances (PFASs) at a source zone impacted by historical use of aqueous film-forming foam (AFFF). Two regenerable (Purolite A860 and A520E) and three single-use (Purolite PFA694E, Calgon CalRes 2301, and Dowex PSR2+) AERs were tested in parallel, collecting effluent samples after treatment for 30-sec and 2-min total empty bed contact time (EBCT). Results demonstrate that single-use AERs significantly outperform regenerable resins, particularly for treatment of long-chain perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonic acids (PFSAs). No detectable concentrations of ≥C7 PFCAs or PFSAs were observed within 150,000 bed volumes (BVs) after treatment with the single-use resins (2-min EBCT). Analysis of effluent samples following 30-sec EBCT treatment shows that even the shortest-chain PFSAs do not reach 50% breakthrough within the first 350,000 BVs, though differences in removal of short-chain PFCAs was less dramatic. The regenerable polyacrylic A860 resin performed very poorly compared to all polystyrene resins, with >90% breakthrough of all PFASs occurring within 10,000 BVs. The greater affinity of polystyrene resins is attributed to increased hydrophobic interactions in addition to electrostatic ion exchange. Analysis of breakthrough profiles reveals empirical correlation with ion exchange affinity coefficients (logK_ex) measured in batch experiments. Postmortem analysis of PFASs extracted from spent resins revealed chromatographic elution behavior and competition among PFASs for adsorption to the resins. PFSAs and long-chain PFCAs were preferentially adsorbed to earlier sections in the AER columns, whereas short-chain PFCAs were competitively displaced towards the later sections of the columns and into the effluent, consistent with effluent concentrations of the latter structures exceeding influent values. These results provide insights into the mechanisms that govern PFAS adsorption to AERs in real multisolute groundwater matrices and support findings from other diverse sites regarding PFAS affinity, elution behavior, and competition for exchange sites.

Global patterns and temporal trends of perfluoroalkyl substances in municipal wastewater: A meta-analysis

Despite increasing regulatory efforts to reduce production of per- and polyfluoroalkyl substances (PFAS), continued human and ecological exposure to PFAS has led to concerns about historical releases. Municipal wastewater treatment plants (WWTPs) provide important conduits between waste sources and the environment. We present a meta-analysis of results reported in 44 peer-reviewed publications that include 460 influent and 528 effluent samples, collected from 21 countries, for which some or all of five perfluorinated carboxylic acids (PFCAs) and three perfluorinated sulfonic acids (PFSAs) were measured. Our meta analysis revealed global patterns and trends that, to our knowledge, have not been reported elsewhere. Regression analyses of samples collected from 2004 to 2020 quantified the temporal trends of global wastewater effluent concentrations of each of the PFAS and the corresponding mean concentration for each country. Although legacy compounds, perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), have been reported with the highest measured concentrations, their global temporal trends are lowest of all PFAS considered. Concentrations of most PFAS analyzed in wastewater in the United States have not changed significantly with time, whereas reported PFAS concentrations in wastewater effluent from China have increased from 11% to 37% per year. In addition, our results show significant positive correlations between previous wastewater effluent concentrations of individual PFAS and the gross domestic product per capita of each country. Our analysis of this global data set also confirmed conclusions from previous studies on smaller data sets: (i) none of the PFAS studied are effectively removed by conventional treatment processes; (ii) effluents from treatment plants that include a significant industrial component to their influent tend to have higher PFAS concentrations; and (iii) the few studies that measured both aqueous concentrations and concentrations adsorbed to suspended particulate matter (SPM) indicate that PFAS adsorbed to SPM can contribute significantly to the total PFAS load.

Global performance and trends of research on per- and polyfluoroalkyl substances (PFASs) between 2001 and 2018 using bibliometric analysis

Per- and polyfluoroalkyl substances (PFASs) are widely used in food packaging, non-stick pots, and surfactants. However, their persistence in the environment, hazardous nature, and potential for bioaccumulation and long-range transport have alarmed an increasing number of scholars and research institutions. Although several literature reviews on PFASs research exist, only a few of them have considered bibliometric indices. In this study, 3,373 PFASs-related articles published between 2001 and 2018 were analyzed using a bibliometric analysis method based on the Science Citation Index (SCI) Expanded. The software tools for mapping knowledge domain (MKD) (VOSviewer and Science of Science (Sci2)) were used to analyze the performance of contributors and PFASs research topics, hotspots, and trends. Our results reveal that the number of PFASs-related articles published annually has increased significantly, with most originating from the United States (followed by those from China). The Chinese Academy of Sciences has published the most articles. A comprehensive analysis of title, keywords, and keywords plus showed that PFASs research hotspots include humans, precursors, and detection methods, with the main focuses being environmental science, toxicology, and environmental engineering. The four main research topics of PFASs were identified, and a literature review was carried out for each one. Overall, this study can supply researchers with a deeper understanding of the development of PFASs studies and provide a comprehensive data reference for researchers to further grasp the research direction in this field.

Recent advances in mass spectrometry analytical techniques for per- and polyfluoroalkyl substances (PFAS)

The ubiquitous presence of per- and polyfluoroalkyl substances (PFAS) in various environments has led to increasing concern, and these chemicals have been confirmed as global contaminants. Following the chemical regulatory restrictions imposed, PFAS alternatives that are presumed to be less toxic have been manufactured to replace the traditional ones in the market. However, owing to the original release and alternative usage, continuous accumulation of PFAS has been reported in environmental and human samples, with uncertain consequences for ecosystem and human health. It is crucial to promote and improve existing analytical techniques to facilitate the detection of trace amounts of PFAS in diverse environmental matrices. This review summarizes analytical methods that have been applied to and advanced for targeted detection and suspect screening of PFAS, which mainly include (i) sampling and sample preparation methods for various environment matrices and organisms, and quality assurance/quality control during the analysis process, and (ii) quantitative methods for targeted analysis and automated suspect screening strategies for non-targeted PFAS analysis, together with their applications, advantages, shortcomings, and need for new method development.

Per- and polyfluoroalkyl substances in the atmospheric total suspended particles in Karachi, Pakistan: Profiles, potential sources, and daily intake estimates

Per- and polyfluoroalkyl substances (PFAS) have received continuous attention; however, there is limited understanding of their sources in the atmosphere and related human exposure risks. This study measured PFAS in the atmospheric total suspended particles collected from Karachi, Pakistan, during the winter. Among the quantified PFAS, perfluorobutanoic acid (PFBA) showed the highest average concentration (3.11 ± 2.64 pg/m³), accounting for 32% of the total PFAS. Wind speed was positively correlated with perfluorohexanoic acid (PFHxA) and N-ethyl perfluorooctanesulfonamide (N-EtFOSA), while relative humidity was negatively correlated with perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA). Weighted potential source contribution function (WPSCF) and concentration weighted trajectory (WCWT) analyses suggested that northwestern Pakistan and western Afghanistan areas were highly associated with the long-range atmospheric transport of PFAS. We also calculated the daily intake of PFAS via inhalation, which were in the range of 0.07-3.98 and 0.01-0.33 pg/kg bw/d for children and adults, respectively. The calculated hazard quotient (HQ) of PFOS and PFOA was significantly lower than 1, indicating less or unlikely to cause non-carcinogenic effect via inhalation exposure. Overall, this study contributes to the understanding of geographic origins and human inhalation risks of airborne PFAS on a regional scale.

Poly- and Perfluorinated Alkyl Substances in Air and Water from Dhaka, Bangladesh

Bangladesh hosts extensive textile manufacturing, for some of which per- and polyfluorinated alkyl substances (PFAS) have been used to impart water and dirt repellency, among other things. Textile waste emissions to the atmosphere and discharge into rivers and other bodies of water could present a significant concern for human and ecosystem health, but there is little information on PFAS in Bangladesh. To assess the presence of ionic PFAS and their precursors in air and water from Dhaka, Bangladesh, polyethylene sheets were deployed for 28 days as passive samplers for neutral PFAS in outdoor air and water, while ionic PFAS were measured from discrete water grabs. Fluorotelomer alcohols (FTOHs) were detected at almost all sites in air and water; the most frequently detected compound was 6:2 FTOH, ranging from below instrumental detection limits (<IDL) to 70 ng m^-3 in air and from <IDL to -19 ng L^-1 in water. Of the ionic PFAS, perfluorobutanoic acid (PFBA), perfluorohexanoic acid, perfluorooctanoic acid, perfluorohexane sulfonic acid, and perfluorooctane sulfonic acid dominated in frequency of detection and magnitude, with concentrations ranging from 1.8 to 19.0 ng L^-1 in surface waters. The prevalence of 6:2 FTOH and PFBA across sites probably reflects their use in textile manufacturing and could indicate the industry's switch to shorter-chain PFAS alternatives. Environ Toxicol Chem 2022;41:334-342. © 2021 SETAC.

PFAS Molecules: A Major Concern for the Human Health and the Environment

Per- and polyfluoroalkyl substances (PFAS) are a group of over 4700 heterogeneous compounds with amphipathic properties and exceptional stability to chemical and thermal degradation. The unique properties of PFAS compounds has been exploited for almost 60 years and has largely contributed to their wide applicability over a vast range of industrial, professional and non-professional uses. However, increasing evidence indicate that these compounds represent also a serious concern for both wildlife and human health as a result of their ubiquitous distribution, their extreme persistence and their bioaccumulative potential. In light of the adverse effects that have been already documented in biota and human populations or that might occur in absence of prompt interventions, the competent authorities in matter of health and environment protection, the industries as well as scientists are cooperating to identify the most appropriate regulatory measures, substitution plans and remediation technologies to mitigate PFAS impacts. In this review, starting from PFAS chemistry, uses and environmental fate, we summarize the current knowledge on PFAS occurrence in different environmental media and their effects on living organisms, with a particular emphasis on humans. Also, we describe present and provisional legislative measures in the European Union framework strategy to regulate PFAS manufacture, import and use as well as some of the most promising treatment technologies designed to remediate PFAS contamination in different environmental compartments.

Legacy and alternative per- and polyfluoroalkyl substances (PFASs) in the West River and North River, south China: Occurrence, fate, spatio-temporal variations and potential sources

Poly- and perfluoroalkyl substances (PFASs) are contaminants of global concern. Studies in Pearl River, south China have focused on the delta area, while the upstream contributions are unclear. Here, we systematically investigated the fate, trends and potential sources of 57 PFASs in river water, sediment and fish of the North and West Rivers of the Pearl River system. Perfluorooctanoic acid (PFOA), Perfluorooctanesulfonic acid (PFOS) and 6:2 chlorinated polyfluoroalkyl ether sulfonate (6:2Cl-PFESA) were frequently found compounds in waters, sediments and fish, suggesting their wide usage in this area and potential for bioaccumulation. Waters showed a higher ∑PFASs in the wet season compared to the dry season, but sediments did not. The North River contributed higher PFAS loads to the Pearl River Delta. Our results also reflect the current shift in PFAS usage from legacy substances to alternatives. This study, for the first time, reports data on PFASs in two upstream rivers of the Pearl River and on alternative PFASs such as PFESA in this area, which can better the understanding of their use, fate, risk assessment and further controls and management.

Per- and polyfluoroalkyl substances (PFAS) in sediments collected from the Pensacola Bay System watershed

Sediment samples from 25 locations in the Pensacola Bay System (PBS) watershed were analyzed for the presence of 51 per- and polyfluoroalkyl substances (PFAS) using ultra high-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) and selected reaction monitoring. Results revealed quantifiable concentrations of PFAS in all sampling locations. More specifically, perfluorobutanoic acid (PFBA) was present in every sediment sample with a minimum and maximum concentration of 0.04 to 0.48 ng g-1 dry weight, respectively, across the 25 sites with an average of 0.1 ± 0.09 ng g-1. While PFOS, with an average of 0.11 ± 0.14 ng g-1 (range: Collapse

Key Words

• Pensacola Bay System
• Per-and polyfluoroalkyl substances (PFAS)
• Sediment
• Storm events
• UHPLC-MS/MS

Collapse

MESH Headings Collapse

Grants

• EPA999999 Intramural EPA

Collapse

Affiliation(s)

Atiye Ahmadireskety Chemistry Department, University of Florida, Gainesville, Florida, USA
Bianca F. Da Silva College of Veterinary Medicine, Department of Physiological Sciences, University of Florida, Gainesville, Florida, USA
Jill A. Awkerman Gulf Ecosystem Measurement & Modeling Division, US Environmental Protection Agency, Gulf Breeze, Florida, USA
Joe Aufmuth George A. Smathers Libraries, University of Florida, Gainesville, Florida, USA
Richard A. Yost Chemistry Department, University of Florida, Gainesville, Florida, USA
John A. Bowden Chemistry Department, University of Florida, Gainesville, Florida, USA College of Veterinary Medicine, Department of Physiological Sciences, University of Florida, Gainesville, Florida, USA

Collapse

Perfluorooctane sulfonate interferes with non-genomic estrogen receptor signaling pathway, inhibits ERK1/2 activation and induces apoptosis in mouse spermatocyte-derived cells

Perfluorooctane sulfonate (PFOS) is a widespread persistent organic pollutant. Both epidemiological survey and our previous in vivo study have revealed the associations between PFOS exposure and spermatogenesis disorder, while the underlying mechanisms are far from clear. In the present study, GC-2 cells, a mouse spermatocyte-derived cell line, was used to investigate the toxic effects of PFOS and its hypothetical mechanism of action. GC-2 cells were treated with PFOS (0, 50, 100 and 150 μM) for 24 h or 48 h. Results demonstrated that PFOS dose-dependently inhibited cell viability, induced G0/G1 cell cycle arrest and triggered apoptosis, which might be partly explained by the decrease in cyclin D1, PCNA and Bcl-2 protein expression; increase in Bax protein expression; and activation of caspase-9, -3. In addition, PFOS did not directly transactivate or repress estrogen receptors (ERs) in gene reporter assays, whereas the protein levels of both ERα and ERβ were significantly altered and the downstream ERK1/2 phosphorylation was inhibited by PFOS. Furthermore, pretreatment with specific ERα agonist PPT (1 μM) significantly attenuated the above PFOS-induced effects while specific ERβ agonist DPN (1 μM) accelerated them. These results suggest that PFOS may induce growth inhibition and apoptosis via non-genomic estrogen receptor/ERK1/2 signaling pathway in GC-2 cells, which provides a novel insight regarding the potential role of ERs in mediating PFOS-triggered spermatocyte toxicity.

Yale School of Public Health Symposium: An overview of the challenges and opportunities associated with per- and polyfluoroalkyl substances (PFAS)

On December 13, 2019, the Yale School of Public Health hosted a symposium titled "Per- and Polyfluoroalkyl Substances (PFAS): Challenges and Opportunities" in New Haven, Connecticut. The meeting focused on the current state of the science on these chemicals, highlighted the challenges unique to PFAS, and explored promising opportunities for addressing them. It brought together participants from Yale University, the National Institute of Environmental Health Sciences, the University of Massachusetts Amherst, the University of Connecticut, the Connecticut Agricultural Experiment Station, the Connecticut Departments of Public Health and Energy and Environmental Protection, and the public and private sectors. Presentations during the symposium centered around several primary themes. The first reviewed the current state of the science on the health effects associated with PFAS exposure and noted key areas that warranted future research. As research in this field relies on specialized laboratory analyses, the second theme considered commercially available methods for PFAS analysis as well as several emerging analytical approaches that support health studies and facilitate the investigation of a broader range of PFAS. Since mitigation of PFAS exposure requires prevention and cleanup of contamination, the third theme highlighted new nanotechnology-enabled PFAS remediation technologies and explored the potential of green chemistry to develop safer alternatives to PFAS. The fourth theme covered collaborative efforts to assess the vulnerability of in-state private wells and small public water supplies to PFAS contamination by adjacent landfills, and the fifth focused on strategies that promote successful community engagement. This symposium supported a unique interdisciplinary coalition established during the development of Connecticut's PFAS Action Plan, and discussions occurring throughout the symposium revealed opportunities for collaborations among Connecticut scientists, state and local officials, and community advocates. In doing so, it bolstered the State of Connecticut's efforts to implement the ambitious initiatives that its PFAS Action Plan recommends.

A review of the occurrence, transformation, and removal of poly- and perfluoroalkyl substances (PFAS) in wastewater treatment plants

Poly- and perfluoroalkyl substances (PFAS) comprise more than 4,000 anthropogenically manufactured compounds with widescale consumer and industrial applications. This critical review compiles the latest information on the worldwide distribution of PFAS and evaluates their fate in wastewater treatment plants (WWTPs). A large proportion (>30%) of monitoring studies in WWTPs were conducted in China, followed by Europe (30%) and North America (16%), whereas information is generally lacking for other parts of the world, including most of the developing countries. Short and long-chain perfluoroalkyl acids (PFAAs) were widely detected in both the influents (up to 1,000 ng/L) and effluents (15 to >1,500 ng/L) of WWTPs. To date, limited data is available regarding levels of PFAS precursors and ultra-short chain PFAS in WWTPs. Most WWTPs exhibited low removal efficiencies for PFAS, and many studies reported an increase in the levels of PFAAs after wastewater treatment. The analysis of the fate of various classes of PFAS at different wastewater treatment stages (aerobic and/aerobic biodegradation, photodegradation, and chemical degradation) revealed biodegradation as the primary mechanism responsible for the transformation of PFAS precursors to PFAAs in WWTPs. Remediation studies at full scale and laboratory scale suggest advanced processes such as adsorption using ion exchange resins, electrochemical degradation, and nanofiltration are more effective in removing PFAS (~95-100%) than conventional processes. However, the applicability of such treatments for real-world WWTPs faces significant challenges due to the scaling-up requirements, mass-transfer limitations, and management of treatment by-products and wastes. Combining more than one technique for effective removal of PFAS, while addressing limitations of the individual treatments, could be beneficial. Considering environmental concentrations of PFAS, cost-effectiveness, and ease of operation, nanofiltration followed by adsorption using wood-derived biochar and/or activated carbons could be a viable option if introduced to conventional treatment systems. However, the large-scale applicability of the same needs to be further verified.

Quantification of Biodriven Transfer of Per- and Polyfluoroalkyl Substances from the Aquatic to the Terrestrial Environment via Emergent Insects

Emergent aquatic insects are important food subsidies to riparian food webs but can also transfer waterborne contaminants to the terrestrial environment. This study aimed to quantitatively assess this biodriven transfer for per- and polyfluoroalkyl substances (PFAS). Aquatic insect larvae, emergent aquatic insects, terrestrial consumers, sediment, and water were collected from a contaminated lake and stream and an uncontaminated pond, and analyzed for PFAS and stable isotopes of carbon and nitrogen. Top predators in this study were spiders, which showed the highest average ∑₂₄PFAS concentration of 1400 ± 80 ng g^-1 dry weight (dw) at the lake and 630 ng g^-1 dw at the stream. The transfer of PFAS from the lake to the riparian zone, via deposition of emergent aquatic insects, was 280 ng ∑₂₄PFAS m^-2 d^-1 in 2017 and only 23 ng ∑₂₄PFAS m^-2 d^-1 in 2018. Because of higher production of emergent aquatic insects, the lake had higher PFAS transfer and higher concentrations in terrestrial consumers compared to the stream, despite the stream having higher PFAS concentration in water and aquatic insect larvae. Our results indicate that biodriven transfer of PFAS from the aquatic systems and subsequent uptake in terrestrial food webs depend more on emergence amounts, i.e., aquatic prey availability, rather than on PFAS concentrations in water and aquatic prey.

Per- and polyfluoroalkyl substances (PFAS) as contaminants of emerging concern in Asia's freshwater resources

The occurrence of per- and polyfluoroalkyl substances (PFAS) in water resources is an emerging concern because of their environmental persistence and bioaccumulation in humans. In Western countries, health advisories regarding PFAS exposure have been released to warn the public of its potential adverse effects. However, awareness regarding PFAS exposure in Asia is still at its infancy as reflected by the minimal safeguards imposed to protect the population from exposure. Here, we reviewed studies on PFAS contamination in Asia with a focus on freshwater resources to determine whether PFAS is also a concern in this part of the globe. Peer reviewed articles which included information on PFAS levels from 2000 to 2020 were compiled. The highest PFAS contamination was detected in surface water relative to ground, tap, and drinking water. PFAS levels in water resources in several countries in Asia, such as China, Japan, and South Korea, were above the recommended level, similar to that in the United States. PFAS in South and Southeast Asia were just below the recommended level, but the rise of PFAS in China in the recent decade, alongside its remarkable economic and industrial growth, suggests that increased PFAS contamination in South and Southeast Asia may soon follow, as these countries compete with the global economy. Hence, there is a need for these countries to also implement measures that will reduce the exposure of their population to PFAS.

Fingerprinting Plastic-Associated Inorganic and Organic Matter on Plastic Aged in the Marine Environment for a Decade

The long-term aging of plastic leads to weathering and biofouling that can influence the behavior and fate of plastic in the marine environment. This is the first study to fingerprint the contaminant profiles and bacterial communities present in plastic-associated inorganic and organic matter (PIOM) isolated from 10 year-aged plastic. Plastic sleeves were sampled from an oyster aquaculture farm and the PIOM was isolated from the intertidal, subtidal, and sediment-buried segments to investigate the levels of metal(loid)s, polyaromatic hydrocarbons (PAHs), per-fluoroalkyl substances (PFAS) and explore the microbial community composition. Results indicated that the PIOM present on long-term aged high-density polyethylene plastic harbored high concentrations of metal(loid)s, PAHs, and PFAS. Metagenomic analysis revealed that the bacterial composition in the PIOM differed by habitat type, which consisted of potentially pathogenic taxa including Vibrio, Shewanella, and Psychrobacter. This study provides new insights into PIOM as a potential sink for hazardous environmental contaminants and its role in enhancing the vector potential of plastic. Therefore, we recommend the inclusion of PIOM analysis in current biomonitoring regimes and that plastics be used with caution in aquaculture settings to safeguard valuable food resources, particularly in areas of point-source contamination.

Contaminant occurrence, mobility and ecological risk assessment of phthalate esters in the sediment-water system of the Hangzhou Bay

The pollution characteristics, spatiotemporal variation, sediment-water partitioning, and potential ecological risk assessment of phthalate esters (PAEs) in the sediment-seawater system of the Hangzhou Bay (HZB) in summer and autumn were researched. The sum of the concentrations of the 10 PAEs in seawater ranges from 7305 ng/L to 22,861 ng/L in summer and from 8100 ng/L to 33,329 ng/L in autumn, with mean values of 15,567 ± 4390 and 17,884 ± 6850 ng/L, respectively. The Σ_16PAEs in the sediments are between 118 and 5888 μg/kg and 145 and 4746 μg/kg in summer and autumn, respectively. The level of PAEs in seawater varies with the seasons, but it is relatively stable in the sediments. Di(2-ethylhexyl) phthalate (DEHP), di-n-butyl phthalate (DnBP), and diisobutyl phthalate (DiBP) are the predominant PAE congeners in the HZB. The DnBP and DiBP concentrations in seawater are greater than the DEHP concentration, which is the opposite in the sediments. The sediment-seawater equilibrium distribution study indicates that the PAEs with medium molecular weights, such as DiBP, butyl benzyl phthalate, and DnBP, are near dynamic equilibrium in the sediment-seawater system; PAEs with high molecular weights (e.g., di-n-octyl phthalate and DEHP) tend to transfer from water to the sediments; and PAEs with low molecular weights (e.g., dimethyl phthalate, diethyl phthalate, and diamyl phthalate) tend to spread to seawater. The risk assessment results in seawater indicate that DEHP and DiBP might pose high potential risks to sensitive organisms, and DnBP might exhibit medium ecological risks. In the sediment, DiBP might display a high potential risk to fish, and the potential risk of DEHP is high in several sites.

Thermal Regeneration of Spent Granular Activated Carbon Presents an Opportunity to Break the Forever PFAS Cycle

Extensive use of per- and polyfluoroalkyl substances (PFAS) has caused their ubiquitous presence in natural waters. One of the standard practices for PFAS removal from water is adsorption onto granular activated carbon (GAC); however, this approach generates a new waste stream, i.e., PFAS-laden GAC. Considering the recalcitrance of PFAS molecules in the environment, inadequate disposal (e.g., landfill or incineration) of PFAS-laden GAC may let PFAS back into the aquatic cycle. Therefore, developing approaches for PFAS-laden GAC management present unique opportunities to break its forever circulation within the aqueous environment. This comprehensive review evaluates the past two decades of research on conventional thermal regeneration of GAC and critically analyzes and summarizes the literature on regeneration of PFAS-laden GACs. Optimized thermal regeneration of PFAS-laden GACs may provide an opportunity to employ existing regeneration infrastructure to mineralize the adsorbed PFAS and recover the spent GAC. The specific objectives of this review are (i) to investigate the role of physicochemical properties of PFAS on thermal regeneration, (ii) to assess the changes in regeneration yield as well as GAC physical and chemical structure upon thermal regeneration, and (iii) to critically discuss regeneration parameters controlling the process. This literature review on the engineered regeneration process illustrates the significant promise of this approach that can break the endless environmental cycle of these forever chemicals, while preserving the desired physicochemical properties of the valuable GAC adsorbent.

First insights into the formation and long-term dynamic behaviors of nonextractable perfluorooctanesulfonate and its alternative 6:2 chlorinated polyfluorinated ether sulfonate residues in a silty clay soil

Per- and polyfluoroalkyl substances (PFAS) are persistent and toxic contaminants that are ubiquitous in the environment. They can incorporate into soil as nonextractable residues (NER) which are not detectable with conventional analytical protocols but are still possible to remobilize with changes of surrounding conditions, and thus will be bioavailable again. Therefore, there is a need to investigate thoroughly the long-term fate of NER-PFAS. In this study, a 240-day incubation of perfluorooctanesulfonate (PFOS) and its alternative 6:2 chlorinated polyfluorinated ether sulfonate (F-53B) in a silty clay topsoil was carried out. Solvent extraction, alkaline hydrolysis and sequential chemical degradation were applied on periodically sampled soil to obtain extractable, moderately bound and deeply bound PFAS, respectively. The results confirmed the formation of NER of both compounds but with different preferences of incorporating mechanisms. NER-PFOS was formed predominantly by covalent binding (via head group) and strong adsorption (via tail group). The formation of NER-F-53B was mainly driven by physical entrapment. Both bound compounds within the incubation period showed three-stage behaviors including an initial period with slight release followed by a (re) incorporating stage and a subsequent remobilizing stage. This work provides some first insights on the long-term dynamic behaviors of nonextractable PFAS and will be conducive to their risk assessment and remediation (e.g. estimating potential NER-PFAS level based on their free extractable level, and selecting remediation methods according to their prevailing binding mechanisms).

Highly Efficient Hydrated Electron Utilization and Reductive Destruction of Perfluoroalkyl Substances Induced by Intermolecular Interaction

Perfluoroalkyl substances (PFASs) are highly toxic synthetic chemicals, which are considered the most persistent organic contaminants in the environment. Previous studies have demonstrated that hydrated electron based techniques could completely destruct these compounds. However, in the reactions, alkaline and anaerobic conditions are generally required or surfactants are involved. Herein, we developed a simple binary composite, only including PFAS and hydrated electron source chemical. The system exhibited high efficiency for the utilization of hydrated electrons to decompose PFASs. By comparing the degradation processes of perfluorooctanoic acid (PFOA) in the presence of seven indole derivatives with different chemical properties, we could conclude that the reaction efficiency was dependent on not only the yield of hydrated electrons but also the interaction between PFOA and indole derivative. Among these derivatives, indole showed the highest degradation performance due to its relatively high ability to generate hydrated electrons, and more importantly, indole could form a hydrogen bonding with PFOA to accelerate the electron transfer. Moreover, the novel composite demonstrated high reaction efficiency even with coexisting humic substance and in a wide pH range (4-10). This study would deepen our understanding of the design of hydrated electron based techniques to treat PFAS-containing wastewater.

PFAS Degradation in Ultrapure and Groundwater Using Non-Thermal Plasma

Perfluoroalkyl substances (PFAS) represent one of the most recalcitrant class of compounds of emerging concern and their removal from water is a challenging goal. In this study, we investigated the removal efficiency of three selected PFAS from water, namely, perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA) and pefluorooctanesulfonic acid (PFOS) using a custom-built non-thermal plasma generator. A modified full factorial design (with 2 levels, 3 variables and the central point in which both quadratic terms and interactions between couple of variables were considered) was used to investigate the effect of plasma discharge frequency, distance between the electrodes and water conductivity on treatment efficiency. Then, the plasma treatment running on optimized conditions was used to degrade PFAS at ppb level both individually and in mixture, in ultrapure and groundwater matrices. PFOS 1 ppb exhibited the best degradation reaching complete removal after 30 min of treatment in both water matrices (first order rate constant 0.107 min^-1 in ultrapure water and 0.0633 min^-1 in groundwater), while the degradation rate of PFOA and PFHxA was slower of around 65% and 83%, respectively. During plasma treatment, the production of reactive species in the liquid phase (hydroxyl radical, hydrogen peroxide) and in the gas phase (ozone, NO_x) was investigated. Particular attention was dedicated to the nitrogen balance in solution where, following to NO_x hydrolysis, total nitrogen (TN) was accumulated at the rate of up to 40 mg^N L^-1 h^-1.

Legacy and emerging per- and polyfluoroalkyl substances (PFASs) in multi-media around a landfill in China: Implications for the usage of PFASs alternatives

To date, per- and polyfluoroalkyl substances (PFASs) in environmental media surrounding landfills have not attracted much attention. In this study, six legacy PFASs, six short-chain analogues and five emerging alternatives were investigated in groundwater, surface water and sediment samples taken in the vicinity of a valley-type landfill, which had been in operation for over 20 years. Total PFAS concentrations of 110-236 ng/L, 17.3-163 ng/L and 7.91-164 ng/g dw were detected in the surface water, groundwater and sediment samples, respectively. Overall, perfluorooctanoic acid (PFOA) was the dominant PFAS in surface water, but elevated concentrations of perfluorobutanoic acid (PFBA) and perfluoropentanoic acid (PFPeA) were detected in the surface water samples taken adjacent to the landfill, suggesting that the landfill contributed to these compounds. PFBA was the dominant PFAS in the groundwater and sediments. The concentrations of long-chain perfluoroalkyl carboxylic acids (PFCAs) (C8-C12) in the sediment samples correlated significantly with the TOC, Al₂O₃ and Fe₂O₃ contents. The partitioning behaviors of PFCAs in the water-sediment system varied depending on the CF₂ moiety units. For the long-chain PFCAs, positive correlations between the average LogK_d and the number of CF₂ moieties were found to be statistically significant, whereas negative correlations were observed for the short-chain PFCAs (C4-C7). The ratios of short-chain analogues and emerging alternatives versus their respective legacy PFOA and perfluorooctane sulfonate (PFOS) in surface water suggested an increasing trend of short-chain analogues, such as PFBA. The potential health risks of PFOS and PFOA, determined by calculating the estimated daily intake (EDI), were found to be negligible via the drinking groundwater exposure pathway, but more comprehensive studies on the human health risks of PFASs from landfills are essential.

Endocrine disruption by PFAS: A major concern associated with legacy and replacement substances

Perand poly-fluorinated alkyl substances (PFAS) have been used for decades in a great variety of processes and products by virtue of their exceptional properties, versatility and chemical stability. Nevertheless, it is increasingly recognized that these substances can represent a serious hazard to human health and living organisms due to their persistence, long-range transport potential and tendency to accumulate in biota. For this reason, some efforts have been made across the EU to identify alternative molecules, with a shorter carbon chain and theoretically safer profile, that might replace the previous generation of legacy PFAS. Unfortunately, this strategy has not been entirely successful and serious concerns are still posed by PFAS in different human populations. Among others, an emerging aspect is represented by the adverse effects that both legacy and alternative PFAS can exert on the human endocrine system, with respect to vulnerable target subpopulations. In this review we will briefly summarize PFAS properties, uses and environmental fate, focusing on their effects on human reproductive capacity and fertility, body weight control and obesity as well as thyroid function.

A chemical kinetic model for the decomposition of perfluorinated sulfonic acids

Perfluorinated sulfonic acids (such as perfluorooctanesulfonic, PFOS, and short-chain analogues) are notorious halogenated pollutants that exhibit severe toxicity, even at minute levels. Limited number of experimental studies addressed their thermal decomposition at elevated temperatures. Such scenarios are particularly relevant to open fires and incineration of materials laden with perfluoroalkyl compounds (PFCs). Herein, we construct a detail kinetic model that illustrates major chemical reactions underpinning initial degradation of 1-butanesulfonic acid (CF₃(CF₂)₃SO₂OH), as a model compound of PFOS, and perfluorinated sulfonic acids in general. Reaction rate parameters were estimated based on an accurate density functional theory (DFT) formalism. The kinetic model incorporates four sets of reactions, namely, unimolecular decomposition channels, hydrofluorination, hydrolysis, and fragmentation of the alkyl chain. Results are discussed considering recent experimental measurements. Temperature-dependent profiles for a large array of perfluoroalkyl acyl fluorides, short perfluorinated cuts, and perfluorinated cyclic compounds, are presented. SO₂ emerges as the main sulfur carrier, with a minor contribution from SO₃. HF addition to double carbon bonds in alkenes, and to carbonyl bonds in aldehydic structures signifies a major sink pathway for hydrogen fluoride. Addition of moisture was shown to expedite the destruction of relatively large perfluoroalkyl acyl fluorides into C₁ species. Construction of this model could aid in a better understanding of the fate and chemical transformation of PFCs under a pyrolytic environment pertinent to waste incineration and fluorine mineralization.

Paper product production identified as the main source of per- and polyfluoroalkyl substances (PFAS) in a Norwegian lake: Source and historic emission tracking

The entirety of the sediment bed in lake Tyrifjorden, Norway, is contaminated by per- and polyfluoroalkyl substances (PFAS). A factory producing paper products and a fire station were investigated as possible sources. Fire station emissions were dominated by the eight carbon perfluoroalkyl sulfonic acid (PFSA), perfluorooctanesulfonic acid (PFOS), from aqueous film forming foams. Factory emissions contained PFOS, PFOS precursors (preFOS and SAmPAP), long chained fluorotelomer sulfonates (FTS), and perfluoroalkyl carboxylic acids (PFCA). Concentrations and profiles in sediments and biota indicated that emissions originating from the factory were the main source of pollution in the lake, while no clear indication of fire station emissions was found. Ratios of linear-to branched-PFOS increased with distance from the factory, indicating that isomer profiles can be used to trace a point source. A dated sediment core contained higher concentrations in older sediments and indicated that two different PFAS products have been used at the factory, referred to here as Scotchban and FTS mixture. Modelling, based on the sediment concentrations, indicated that 42-189 tons Scotchban, and 2.4-15.6 tons FTS mixture, were emitted. Production of paper products may be a major PFAS point source, that has generally been overlooked. It is hypothesized that paper fibres released from such facilities are important vectors for PFAS transport in the aquatic environment.

Reductive Defluorination and Mechanochemical Decomposition of Per- and Polyfluoroalkyl Substances (PFASs): From Present Knowledge to Future Remediation Concepts

Over the past two decades, per- and polyfluoroalkyl substances (PFASs) have emerged as worldwide environmental contaminants, calling out for sophisticated treatment, decomposition and remediation strategies. In order to mineralize PFAS pollutants, the incineration of contaminated material is a state-of-the-art process, but more cost-effective and sustainable technologies are inevitable for the future. Within this review, various methods for the reductive defluorination of PFASs were inspected. In addition to this, the role of mechanochemistry is highlighted with regard to its major potential in reductive defluorination reactions and degradation of pollutants. In order to get a comprehensive understanding of the involved reactions, their mechanistic pathways are pointed out. Comparisons between existing PFAS decomposition reactions and reductive approaches are discussed in detail, regarding their applicability in possible remediation processes. This article provides a solid overview of the most recent research methods and offers guidelines for future research directions.

Fate of environmental pollutants: A review

A review of the literature published in 2019 on topics associated with the fate of environmental pollutants is presented. Environmental pollutants covered include pharmaceuticals, antibiotic-resistant bacteria and genes, pesticides and veterinary medicines, personal care products and emerging pollutants, PFAS, microplastics, nanomaterials, heavy metals and radionuclides, nutrients, pathogens and indicator organisms, and oil and hydrocarbons. For each pollutant, the occurrence in the environment and/or their fate in engineered as well as natural systems in matrices including water, soil, wastewater, stormwater, runoff, and/or manure is presented based on the published literature. The review includes current developments in understanding pollutants in natural and engineered systems, and relevant physico-chemical processes, as well as biological processes.

Phototransformation of perfluorooctane sulfonamide on natural clay minerals: A likely source of short chain perfluorocarboxylic acids

In this study, a new phototransformation pathway for perfluorooctane sulfonamide (FOSA) and underlying degradation mechanisms are described. Phototransformation of FOSA in a natural clay mineral (montmorillonite) suspension was compared to that in an aqueous solution. Results showed that the presence of montmorillonite can significantly promote the transformation of FOSA to perfluocarboxylic acids (increasing rate). The phototransformation reaction was found to be initiated by the activation of adsorbed oxygen molecules on the surface of montmorillonite, which generate superoxide anion and hydroxyl radicals. Hydroxyl radicals can then attack FOSA adsorbed onto the surface of montmorillonite, promoting the transformation process. In this reaction, clay minerals played a dual role: providing hydroxyl radicals and concentrating FOSA on their surfaces. This helped to promote the contact and reaction between FOSA and hydroxyl radicals. This study provides the first evidence that heterogeneous oxidation of FOSA at the surface of natural clay minerals may act as an important source of perfluocarboxylic acids (PFCAs), especially short chain PFCAs (i.e. trifluoroacetic acid, TFA).

Effect of Sample Storage on the Quantitative Determination of 29 PFAS: Observation of Analyte Interconversions during Storage

In this study, we measured the effects of sample type and storage temperature on the stability of 29 per- and polyfluorinated alkyl substances (PFAS) in water. Spiked bottled water, surface water, and two types of effluent samples were stored in HDPE containers at +20, 4, and -20 °C over a period of up to 180 days. The analytes studied included C₄ through C₁₄ perfluorinated carboxylates (PFCAs); C₄ through C₁₀ and C₁₂ perfluorinated sulfonates (PFSAs); 4:2, 6:2, and 8:2 fluorotelomer sulfonates (FTS); three perfluorooctane sulfonamides (PFOSA, N-MeFOSA, and N-EtFOSA); two perfluorooctane sulfonamide ethanols (N-MeFOSE and N-EtFOSE); and two perfluorooctane sulfonamide acetic acids (N-MeFOSAA and EtFOSAA). Overall, 10 analytes, PFOA, PFNA, 8:2 FTS, PFOSA, N-MeFOSA, NEtFOSA, N-MeFOSAA, N-EtFOSAA, N-MeFOSE, and N-EtFOSE, showed increasing or decreasing concentration trends under at least one of the experimental conditions investigated. Increases in concentrations of N-MeFOSAA and N-EtFOSAA in surface water and effluent samples at +20 and 4 °C correlated with the decreases in the concentrations of N-MeFOSE and N-EtFOSE, respectively, suggesting analyte interconversion during sample storage. This is the first time such analyte conversion is reported in samples under storage, and this work demonstrates the importance of assessing stability of PFAS in environmentally relevant matrices. The significance of this study extends beyond sample storage for analysis, as toxicological and exposure studies conducted at room temperature also need to consider the significance of analyte degradation through the exposure process.