Highly efficient extraction/separation of Cr (VI) by a new family of hydrophobic deep eutectic solvents

A kinetic study of ex-situ soil remediation by nickel extraction using natural deep eutectic solvent

Using natural deep eutectic solvents (NADESs) as a green reagent is a step toward producing environmentally friendly and sustainable technology. This study screened three natural DESs developed using quaternary ammonium salt and organic acid to analyse their capability to extract nickel ions from contaminated mangrove soil, which are ChCl: Acetic Acid (ChCl-AceA), ChCl: Levulinic Acid (ChCl-LevA), and ChCl: Ethylene Glycol(ChCl-Eg) at molar ratio 1:2. The impact of various operating parameters such as washing agent concentration, pH solution, and contact time on the NADES performance in the dissolution of Ni ions batch experiments were performed. The optimal soil washing conditions for metal removal were 30% and 15% concentration, a 1:5 soil-liquid ratio, and pH 2 of ChCl-LevA and ChCl-AceA, respectively. A single removal washing may remove 70.8% and 70.0% Ni ions from the contaminated soil. The dissolution kinetic of Ni ions extraction onto NADES was explained using the linear kinetic pseudo and intraparticle mass transfer diffusion models. The kinetic validation demonstrates a good fit between the experimental and pseudo-second-order Lagergren data. The model's maximum Ni dissolution capacity, Qe are 51.56 mg g-1 and 52.00 mg g-1 of ChCl-LevA and ChCl-AceA, respectively. The synthesised natural-based DES has the potential to be a cost-effective, efficient, green alternative extractant to conventional solvent extraction of heavy metals.

Application of hydrophobic eutectic solvent in efficient biotransformation of total flavonoids of Herba Epimedii

Icaritin, a hydrolysate from total flavonoids of Epimedii (TFE), which has better anti-hepatoma activity than its glycosylated form. In this work, immobilized enzymes 4LP-Tpebgl3@Na-Y and DtRha@ES-107 were used to hydrolyze TFE to prepare icaritin. Five different hydrophobic deep eutectic solvents (HDES) were prepared and the most ideal HDES was successfully selected, which was composed of dodecyl alcohol and thymol with the molar ratio of 2:1. The relative enzyme activity of 4LP-Tpebgl3@Na-Y and DtRha@ES-107 was about 102.4 % and 112.5 %, respectively. In addition, the thermal and binding stability of 4LP-Tpebgl3@Na-Y and DtRha@ES-107 in HDES was not affected negatively. In the biphasic system composed of 50 % (v/v) HDES and Na2HPO4-citric acid buffer (50 mM, pH 5.5), 4LP-Tpebgl3@Na-Y (1.0 U/mL) and TFE (1 g/L) were reacted at 80 °C for 1 h, and then reacted with DtRha@ES-107 (20 U/mL) at 80 °C for 2 h. Finally, TFE was completely converted to 301.8 mg/L icaritin (0.82 mM). After 10 cycles, 4LP-Tpebgl3@Na-Y/DtRha@ES-107 still maintained 84.1 % original activity. In this study, we developed an efficient methodology for icaritin preparation through the integration of enzymatic catalysis and adsorption separation, presenting a viable approach for large-scale, cost-effective production of icaritin.

Deep Eutectic Solvents for Extraction and Preconcentration of Organic and Inorganic Species in Water and Food Samples: A Review

Deep eutectic solvents (DESs) have been developed as green solvents and these are capable as alternatives to conventional solvents used for the extraction of organic and inorganic species from food and water samples. The continuous generation of contaminated waste and increasing concern for the human health and environment have compelled the scientific community to investigate more ecological schemes. In this concern, the use of DESs have developed in one of the chief approach in the field of chemistry. These solvents have appeared as a capable substitute to conventional hazardous solvents and ionic liquids. The DESs has distinctive properties, easy preparation and components availability. It is not only used in scienctific fields but also used in quotidian life. There are many advantages of DESs in analytical chemistry, they are largely used for extraction and determination of inorganic and organic compounds from different samples. In previous a few years, several advanced researches have been focused on the separation and preconcentration of low level of pollutants using DESs as the extractants. This review summarizes the use of DESs in the separation and preconcentration of organic and inorganic species from water and food samples using various microextraction processes.

Developing of an eco-friendly liquid-liquid microextraction method by using menthol-based hydrophobic deep eutectic solvent for determination of basic fuchsin dye: assessment of the greenness profile

Herein, we aimed to develop a new environmentally friendly liquid-liquid microextraction (LLME) method based on hydrophobic deep eutectic solvent (hDES) synthesized using biodegradable dl-menthol and decanoic acid for the spectrophotometric determination of toxic basic fuchsin dye in environmental water samples. The parameters affecting the extraction efficiency such as pH, mole ratio, and volume of hDES (1:2) and type and volume of organic solvent, sample volume, times of vortex, ultrasonic bath and centrifuge, ionic strength, and matrix effect were investigated and optimized. Under optimal conditions, the calibration curve showed linearity in the range of 7.4-167 μg L-1 with a coefficient of determination of 0.9994. The limit of detection, intra-day and inter-day precision, and recovery values were 2.25 μg L-1, 2.46% and 4.45%, and 105 ± 3%, respectively. The preconcentration and enrichment factors were found to be 30 and 61.5, respectively. The proposed hDES-LLME methodology was successfully applied to the environmental water samples to detect toxic BF dye (95-105%). Finally, the ecological impact of the suggested method was evaluated using the analytical eco-scale (PPS:88), complementary green analytical procedure indexe (ComplexGAPI), and the Analytical GREEnness tool (0.63). The assessment results showed that the presented analytical method can be regarded as a green LLME approach for the determination of the BF in water.

Changes of MRGs and ARGs in Acinetobacter sp. SL-1 used for treatment of Cr(VI)-contaminated wastewater with waste molasses as carbon source

Antibiotic resistance genes (ARGs) may be synergistic selected during bio-treatment of chromium-containing wastewater and causing environmental risks through horizontal transfer. This research explored the impact of self-screening bacterium Acinetobacter sp. SL-1 on the treatment of chromium-containing wastewater under varying environmental conditions. The findings indicated that the optimal Cr(VI) removal conditions were an anaerobic environment, 30 °C temperature, 5 g/L waste molasses, 100 mg/L Cr(VI), pH = 7, and a reaction time of 168 h. Under these conditions, the removal of Cr(VI) reached 99.10 %, however, it also developed cross-resistance to tetracycline, gentamicin, clarithromycin, ofloxacin following exposure to Cr(VI). When decrease Cr(VI) concentration to 50 mg/L at pH of 9 with waste molasses as carbon source, the expression of ARGs was down regulated, which decreased the horizontal transfer possibility of ARGs and minimized the potential environmental pollution risk caused by ARGs. The study ultimately emphasized that the treatment of chromium-containing wastewater with waste molasses in conjunction with SL-1 not only effectively eliminates hexavalent chromium but also mitigates the risk of environmental pollution.

Deep eutectic solvents for the determination of endocrine disrupting chemicals

The harmful effects of endocrine disrupting chemicals (EDCs) to humans and other organisms in the environment have been well established over the years, and more studies are ongoing to classify other chemicals that have the potential to alter or disrupt the regular function of the endocrine system. In addition to toxicological studies, analytical detection systems are progressively being improved to facilitate accurate determination of EDCs in biological, environmental and food samples. Recent microextraction methods have focused on the use of green chemicals that are safe for analytical applications, and present very low or no toxicity upon disposal. Deep eutectic solvents (DESs) have emerged as one of the viable alternatives to the conventional hazardous solvents, and their unique properties make them very useful in different applications. Notably, the use of renewable sources to prepare DESs leads to highly biodegradable products that mitigate negative ecological impacts. This review presents an overview of both organic and inorganic EDCs and their ramifications on human health. It also presents the fundamental principles of liquid phase and solid phase microextraction methods, and gives a comprehensive account of the use of DESs for the determination of EDCs in various samples.

The ultramicropore biochar derived from waste distiller's grains for wet-process phosphoric acid purification: Removal performance and mechanisms of Cr(VI)

Solid waste and heavy metal pollution are long-term and challenging subjects in the field of environmental engineering. In this study, we propose a sustainable approach to "treating waste with waste" by utilizing the ultramicropore biochar derived from solid waste distiller's grains as a means to remove Cr(VI) from simulated wastewater and wet phosphoric acid. The biochar prepared in this research exhibit extremely high specific surface areas (up to 2973 m2/g) and a well-developed pore structure, resulting in a maximum Cr(VI) adsorption capacity of 426.0 mg/g and over 99% removal efficiency of Cr(VI). Furthermore, the adsorbent can be reused for up to eight cycles without significant reduction in its Cr(VI) adsorption performance. Mechanistic investigations suggest that the exceptional Cr(VI) adsorption capacity can be attributed to the synergistic effect of electrostatic interaction and reduction adsorption. This study offers an alternative approach for the resource utilization of solid waste distiller's grains, and the prepared biochar holds promise for the removal of Cr(VI) from wastewater and wet-process phosphoric acid.

A review on chromium health hazards and molecular mechanism of chromium bioremediation

Living beings have been devastated by environmental pollution, which has reached its peak. The disastrous pollution of the environment is in large part due to industrial wastes containing toxic pollutants. The widespread use of chromium (Cr (III)/Cr (VI)) in industries, especially tanneries, makes it one of the most dangerous environmental pollutants. Chromium pollution is widespread due to ineffective treatment methods. Bioremediation of chromium (Cr) using bacteria is very thoughtful due to its eco-friendly and cost-effective outcome. In order to counter chromium toxicity, bacteria have numerous mechanisms, such as the ability to absorb, reduce, efflux, or accumulate the metal. In this review article, we focused on chromium toxicity on human and environmental health as well as its bioremediation mechanism.

Sm/Co Magnetic Materials: A Recycling Strategy Using Modifiable Hydrophobic Deep Eutectic Solvents Based on Trioctylphosphine Oxide

Hydrophobic deep eutectic solvents (HDES) are widely used as extractants. Usually, when preparing HDES, only the extraction ability of one component is taken into account, with the second serving as an "inert" component, whose effect on the extraction process is not taken into account. The present study demonstrates the possibility of controlling the selectivity of a hydrophobic deep eutectic solvent based on trioctylphosphine oxide (TOPO) by varying the substance that acts as a hydrogen bond donor, but which does not have an extractive ability. In the course of the work, the influence of the "inert" component on the physicochemical and extraction properties of HDES was confirmed by experimental, spectroscopic, and also calculation methods. A number of phenols with different structural features were chosen as the HDES' hydrogen bond donors to modify: phenol (Ph), para-tert-butylphenol (PTBP) and thymol (Th). Using the example of separation of the Sm/Co pair, the influence of the structure of a hydrogen bond donor on the extraction ability of a hydrophobic deep eutectic solvent was established, where the degree of extraction of Sm (III) increased in the series Th:TOPO < PTBP:TOPO < Ph:TOPO. HDES based on TOPO and phenols can potentially be used to separate Sm and Co from the process leach solutions generated during the hydrometallurgical processing of waste SmCo magnets.

Outstanding Performance of the Deep Eutectic Solvent-Based Aqueous Biphasic System Constructed with Sodium Citrate for a Green Gold Separation

Aqueous biphasic systems (ABSs) that are based on deep eutectic solvents (DESs) are environmentally benign systems to use for metal ion separation. In this work, a series of DESs was synthesized for the first time with PEG 400 as hydrogen bond donors and tetrabutylphonium bromide (P₄Br), tetrabutylammonium bromide (N₄Br), or tetrabutylammonium chloride (N₄Cl) as hydrogen bond acceptors, and then they were combined with citrate (Na₃C₆H₅O₇), which is eco-friendly, to construct an ABS for use in the separation of Au(I) from an aurocyanide solution. Phase diagrams of DESs + Na₃C₆H₅O₇ + H₂O systems were constructed using the experimentally measured data. Multiple factors that affect the efficiency of the gold extraction were studied; these factors were the species of salt or DES and their content, the equilibrium pH, the oscillation time, and the initial gold concentration. Gold(I) is preferentially retained in the DES-rich phase, and the P₄Br:PEG 1:2 + Na₃C₆H₅O₇ + H₂O system has a high extraction efficiency of 100.0% under optimized conditions. FT-IR, NMR, and TEM characterizations and DFT calculations show that the migration of Au(I) from the salt-rich to the DES-rich phase follows an ion exchange mechanism. Specifically, Au(CN)₂^- replaces Br^- in the original P₄Br and generates a stable ion pair with the quaternary phosphonium salt cation, P⁺, and this replacement is driven by electrostatic attractions. A new strong hydrogen bond network simultaneously forms between the anionic Au(CN)₂^- and the -OH group in the PEG 400 component. Finally, the gold of Au(I)-loaded P₄Br:PEG 1:2 can be successfully reduced by sodium borohydride with an efficiency of 100.0%. The strategy to extract gold(I) from alkaline cyanide solutions using an ABS based on DESs as proposed in this work provides a potential platform for developing green technology for recovering gold.

Hydrophobic Deep Eutectic Solvents as Greener Substitutes for Conventional Extraction Media: Examples and Techniques

Deep eutectic solvents (DESs) are multicomponent designer solvents that exist as stable liquids over a wide range of temperatures. Over the last two decades, research has been dedicated to developing noncytotoxic, biodegradable, and biocompatible DESs to replace commercially available toxic organic solvents. However, most of the DESs formulated until now are hydrophilic and disintegrate via dissolution on coming in contact with the aqueous phase. To expand the repertoire of DESs as green solvents, hydrophobic DESs (HDESs) were prepared as an alternative. The hydrophobicity is a consequence of the constituents and can be modified according to the nature of the application. Due to their immiscibility, HDESs induce phase segregation in an aqueous solution and thus can be utilized as an extracting medium for a multitude of compounds. Here, we review literature reporting the usage of HDESs for the extraction of various organic compounds and metal ions from aqueous solutions and absorption of gases like CO₂. We also discuss the techniques currently employed in the extraction processes. We have delineated the limitations that might reduce the applicability of these solvents and also discussed examples of how DESs behave as reaction media. Our review presents the possibility of HDESs being used as substitutes for conventional organic solvents.

Efficient Extraction of Methylene Blue from Aqueous Solution Using Phosphine-Based Deep Eutectic Solvents with Carboxylic Acid

Methylene blue (MB), an organic thiazine dye, has numerous industrial and medical applications. However, MB is a wastewater contaminant that is harmful to humans and aquatic life. Hence, its removal from water bodies is essential. In this work, five novel deep eutectic solvents (DESs) were synthesized using different precursors, screened, and studied for the extraction of methylene blue (MB) from aqueous solution using liquid–liquid extraction. The first, TOP-SA, was synthesized using trioctylphosphine (TOP) as a hydrogen bond acceptor (HBA) and 2-hydroxy benzoic acid as a hydrogen bond donor (HBD). Among these, TOP-SA had the highest MB removal efficiency. The effects of pH, contact time, initial MB concentration, volumetric ratio, temperature, and ionic strength were studied and optimized. A 99.3% removal was achieved in 5 min for a 200 mg dm−3 MB solution mixed in a 1:10 ratio with TOP-SA at 25.0 °C. The structural properties of TOP-SA and its interactions with MB were investigated using FTIR. TOP-SA’s toxicity was investigated using human cells in vitro. TOP-SA was found to be comparatively less toxic and is a more efficient MB remover than other literature reported ionic liquids (ILs).

A Critical Review of Emerging Hydrophobic Deep Eutectic Solvents' Applications in Food Chemistry: Trends and Opportunities

Due to their low cost, biodegradability, and ease of preparation, deep eutectic solvents (DESs) are considered promising green alternatives to conventional solvents, as exploiting green solvents has been a research focus for achieving sustainable development goals. Most DESs in published studies are hydrophilic. On the other hand, the DES's hydrophilicity restricts its practical applicability to just polar molecules, which is a vital disadvantage to this extractant. Hydrophobic DES (HDES) has been developed as a new extractant adept at extracting nonpolar inorganic and organic compounds from aqueous systems. Although there has been little research on HDESs (HDES publications account for <10% of DES), specific intriguing applications have been discovered, requiring investigation and comparisons. As a result, this review covers the applications of emerging HDES in detecting pesticide residues, food additives, contaminants in food packaging, heavy metals, separation and extraction processes in food. According to the available literature, HDESs have the potential to overcome the limitations of hydrophilic DESs and be used in a broader range of applications in food with greater efficiency, which has received little attention. HDES is expected to substitute a lot of harmful organic extractants used for analytical reasons (food chemistry) in the future. Besides, the limitations of HDES were reviewed, and future studies were provided. This will serve as a reference for green chemistry advocates and practitioners in food science who want to minimize pollution and improve efficiency and benefit from the further development of HDESs.

From liquid hot water pretreatment solution to lignin-based hydrophobic deep eutectic solvent for highly efficient extraction of Cr (VI)

Liquid hot water (LHW) pretreatment has been widely investigated attributed to its advantages, such as environmental friendliness, the potential application of dissolved hemicellulose, and no chemical addition. Expanding the portfolio of products that can be made from LHW pretreatment solutions will be critical to enabling a viable LHW-based economy. We provide a one-step method to separate and functionalize lignin from the LHW pretreatment solution. A hydrophobic deep eutectic solvent (hDES) was prepared by using methyltrioctylammonium chloride (MTAC) and the LHW pretreatment solution and directly applied to the extraction of Cr (VI) in an aqueous solution. In the process of forming hDES, the removal rate of liquid hot water lignin (LHWL) was reached 99%. The new LHW-hDES exhibited excellent extraction performance for Cr (VI), the extraction capacity was as high as 198.402 mg g^-1, optimum extraction conditions at the mass of hDES 0.10 g, vortex time 90 s, room temperature, and natural pH. Notably, we have shown that the method of combining the separation and functionalization of lignin in the LHW pretreatment solution, which can provide a way of thinking for the application of the LHW pretreatment solution.

Amine-Based Deep Eutectic Solvents for Alizarin Extraction from Aqueous Media

Alizarin dye is toxic and has a negative influence on human life and the environment. Consequently, the scientific community faces a difficult issue in developing efficient approaches for removing alizarin from water streams. Six distinct deep eutectic solvents (DESs) containing different hydrogen bond acceptors (HBAs), namely trioctylphosphine, trioctylamine and trihexylamine, and two hydrogen bond donors (HBDs), namely salicylic acid and malonic acid, were used to rapidly remove alizarin from high concentration solutions up to 2000 mg/L at room temperature using the liquid–liquid micro-extraction method (LLE). DES-3 had the highest extraction efficiency for alizarin among the other synthesized DESs. The effect of process variables such pH, contact time, dye initial concentration, volume ratio, temperature and salt on alizarin extraction efficiency from water stream was explored, optimized and reported. Statistical analysis was conducted to ensure the accuracy of values for the optimized parameters. For a 1000 mg/L solution of alizarin with a DES/alizarin volume ratio of 1:10 at room temperature, the maximum elimination of 98.02 percent was achieved in 5 min. FTIR was used to analyze the structural properties of DES and the interaction between DES and alizarin. The thermal stability of DES-3 was determined using thermogravimetric analysis (TGA) and indicated that DES-3 has excellent thermal stability up to 320 °C. Human saline was used to test the toxicity of the synthesized DES in vitro. It was determined that synthesized DES is less harmful and more effective at removing alizarin.

Neoteric deep eutectic solvents: history, recent developments, and catalytic applications

Deep eutectic solvents (DESs) are modified versions of ionic liquids (ILs) and are formed by the fusion of polar components (liquids or solids) via hydrogen bonding interactions. DESs are prepared by the simple mixing of two or three cheap constituents (that are capable of self-association) with gentle heating, which leads to a drastic decrease in their melting points. The resultant clear homogeneous mixture consists of cations, anions, as well as neutral molecules; this will contribute both ionic and molecular solvent properties to the DESs. DESs have emerged as alternatives to conventional organic solvents and ILs, which meet different criteria such as availability, low cost, low toxicity, biodegradability, recyclability, ease of preparation method, tunable, and designer physiochemical properties. Many of them have attracted considerable attention and haave been applied in distinct fields of chemistry. To summarize the full-scale development of DESs, this review discusses the history, classifications, various methods of preparation, properties, and some major applications in catalysis in the last three years. This review is expected to be helpful for the further development of DESs based on a summary of the fundamental research in the field.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Treatment of cyanide-bearing wastewater by the N263-TBP synergistic extraction system

In this study, a trioctylmethylammonium chloride (N263)- tributyl phosphate (TBP)-n-octanol-sulfonated kerosene (N263-T) synergistic extraction system and an N263-n-octanol-sulfonated kerosene (N263-O) system were used to treat cyanide (CN)-bearing wastewater. The extraction saturation capacity of the two systems was measured. The influences of the initial pH and phase ratio (O/A) of the two systems on extraction were compared and analyzed. Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, and slope methods were used to analyze the characteristic functional groups in the loaded organic phase, the compositions of the extracted compounds in the extraction reactions and the reaction mechanism. The results indicated that the saturated extraction capacity of the N263-T system, which was much larger than that of the N263-O system, for metal CN complex ions was 4354.31 mg/L. In addition, the N263-T system operated over a wider pH range. The extraction rates of copper (Cu), zinc (Zn), and iron (Fe) ions at pH 14 were 97.4%, 99.1%, and 87.2%, respectively. There was a strong compatibilization effect of TBP on the extraction system. The extraction efficiency of the N263-T system for metal CN complex ions was higher than that of the N263-O system when O/A = 0.4. The saturated loaded N263-T and N263-O systems were stripped by 1 mol/L NaOH +2 mol/L NaSCN solution at O/A = 3. The metal ion concentration in the stripping solution could be enriched to 11996.6 and 8913.3 mg/L for the N263-T and N263-O systems, respectively. During the extraction process, the binding ratios of N263 cations to Cu(CN)₃^2-, Zn(CN)₄^2-, and Fe(CN)₆^3- were 2:1, 2:1, and 3:1, respectively. The binding ratios of TBP to Cu(CN)₃^2-, Zn(CN)₄^2-, and Fe(CN)₆^3- in wastewater were 3:1, 4:1, and 6:1, respectively. The PO group in TBP was linked to the CN group of the metal CN complex ion by hydrogen bonds using the water molecule as a bridge to form a supramolecular anion group, which entered into the organic phase and combined with the N263 cation under the action of ion association.

New low viscous hydrophobic deep eutectic solvents for the ultrasound-assisted dispersive liquid-liquid microextraction of endocrine-disrupting phenols in water, milk and beverage

In the present work, several new hydrophobic deep eutectic solvents (HDESs) were prepared with quaternary ammonium salts as hydrogen bond acceptors (HBAs) and salicylate esters as hydrogen bond donors (HBDs). Then, the obtained HDESs were used as extraction solvents to establish an ultrasound-assisted dispersive liquid-liquid microextraction method combined with high-performance liquid chromatography-ultraviolet detection technique for the determination of four endocrine-disrupting phenols (EDPs) compounds. One of the obtained HDESs composed of tetrabutylammonium chloride (N₄₄₄₄Cl) and methyl salicylate possessed a viscosity of 89.28 mPa•s lower than most reported ionic HDESs (>200 mPa•s), and the low viscous HDES was selected as the optimal extraction solvent. Several key parameters affecting the extraction efficiency were investigated, including the type and volume of HDES, ultrasound time, sample solution pH and salt addition. Under the optimized experimental conditions, the proposed method had good coefficients of determination (R² > 0.9976) in the linear range of 0.5-400 µg•L^-1, the limits of quantification and limits of detection respectively were 0.5-2.5 µg•L^-1 and 0.25-1 µg•L^-1, and the recoveries were in the range of 81.79-109.82%. Finally, the method was used for the preconcentration and determination of EDPs in different samples, including bottled water, tea beverage and milk.

Highly efficient selective extraction of Mo with novel hydrophobic deep eutectic solvents

Recycling of valuable metals from spent catalysts in a green way is gaining extensive interest for economic and environment reasons. In this study, we developed novel hydrophobic deep eutectic solvents to extract Mo from spent catalysts. The hydrophobic DESs have been designed and synthesized by mixing one molar of the quaternary ammonium salt and two molars of various saturated fatty acids with different carbon chain lengths. The extraction ability and extraction mechanism of these DESs were studied, some factors influencing the extraction efficiency, including the structure of hydrogen bond acceptors and hydrogen bond donors, initial aqueous pH, reaction time and temperature, phase ratios were investigated. It is found that the synthesized hydrophobic DESs exhibit excellent extraction performance toward Mo, where the Mo distribution ratio is more than 2200 in the presence of other metals, corresponding to an extraction efficiency of 99% at optimal reaction conditions. This work reveals a distinct class of materials, guiding an effective and green way for spent catalyst treatment.Implications: Novel hydrophobic deep eutectic solvents have been developed to extract Mo from spent catalysts, the synthesized hydrophobic DESs possess several advantages, such as green, low price, low toxicity, and biodegradability. It exhibits excellent extraction performance under an optimized extraction condition. This work reveals a distinct class of materials, guiding a promising way for green and economical utilization of spent catalysts.

Recovery of Rare Earth Elements (REEs) Using Ionic Solvents

Rare earth elements (REEs) are becoming more and more significant as they play crucial roles in many advanced technologies. Therefore, the development of optimized processes for their recovery, whether from primary resources or from secondary sources, has become necessary, including recovery from mine tailings, recycling of end-of-life products and urban and industrial waste. Ionic solvents, including ionic liquids (ILs) and deep-eutectic solvents (DESs), have attracted much attention since they represent an alternative to conventional processes for metal recovery. These systems are used as reactive agents in leaching and extraction processes. The most significant studies reported in the last decade regarding the recovery of REEs are presented in this review.

Novel recyclable acidic hydrophobic deep eutectic solvents for highly efficient extraction of calcium dobesilate in water and urine samples

Deep eutectic solvents (DESs) have been considered to be one of the most promising green alternatives of conventional volatile solvents for liquid-liquid separation. However, acidic hydrophobic DESs have been less studied although they are of great importance for the extraction of compounds which are unstable in alkaline conditions. In this study, a novel family of acidic hydrophobic deep eutectic solvents was designed and prepared from methyl trioctyl ammonium chloride and a series of haloacetic acids. For the first time, the obtained DESs were used for extraction and determination of calcium dobesilate, which is an extensively used medicine for treating vascular diseases, but it can be easily oxidized under alkaline and neutral conditions. The factors influencing extraction process including pH, temperature, extract time, inorganic salts and organic coexistence were systematically investigated. It is found that these DESs exhibited outstanding extraction performance towards calcium dobesilate. The extraction equilibrium time was only 3 min in a wide range of pH (1.2-9.2) at room temperature and the extraction capacity was up to 504 mg/g. The detection limit of calcium dobesilate extracting from water samples was 0.05 μg/L and the limit of quantification was 0.5 μg/L. A variety of inorganic salts with the concentration up to 1.0 mol/L and common coexisting organic compounds, such as glucose and starch, with the concentration more than 1000 times higher than the target analyte had no obvious impact on the extraction efficiency. The relative recovery for real samples ranged from 93.2% to 108.6%. Furthermore, the DESs could be recycled and regenerated through back extraction. After fifteen cycles, the extraction efficiency was still up to 99%. Finally, the extraction and back extraction mechanism was discussed in detail.

Modulating solvation interactions of deep eutectic solvents formed by ammonium salts and carboxylic acids through varying the molar ratio of hydrogen bond donor and acceptor

Deep eutectic solvents (DESs) have gained increasing popularity in separation science due to the fact that their physico-chemical properties can be easily fine-tuned by varying the type or ratio of hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD). While it is well-known that the molar ratio of HBA/HBD affects the melting point of a eutectic mixture, much less is understood regarding its effect on the magnitude of individual solvation interactions. This is largely due to the fact that established solvatochromic dye methods lack sensitivity when the HBA/HBD ratio is varied slightly in a eutectic mixture. Herein, this study is the first to measure the variation of DES solvation interactions with small changes in the molar ratio of HBA/HBD using inverse gas chromatography (IGC). Solute-solvent interactions of three different DES systems comprised of ammonium salts and organic acids were examined. The probe molecules were studied for 18 eutectic mixtures of varied HBA and HBD composition. DES hydrogen bond basicity, hydrogen bond acidity, and dispersive-type interactions exhibited the greatest change when the molar ratio of HBA/HBD was varied in the eutectic mixture. Results from this study demonstrate that the HBA/HBD ratio can be used to modulate the solvation characteristics for this class of DESs in separations and that the stoichiometric ratio of the HBA/HBD is important in ensuring their reproducible preparation.

Study on detoxification and removal mechanisms of hexavalent chromium by microorganisms

Extensive industrial activities have led to an increase of the content of chromium in the environment, which causes serious pollution to the surrounding water, soil and atmosphere. The enrichment of chromium in the environment through the food chain ultimately affects human health. Therefore, the remediation of chromium pollution is crucial to development of human society. A lot of scholars have paid attention to bioremediation technology owing to its environmentally friendly and low-cost. Previous reviews mostly involved pure culture of microorganisms and rarely discussed the optimization of bioreduction conditions. To make up for these shortcomings, we not only introduced in detail the conditions that affect microbial reduction but also innovatively introduced consortium which may be the cornerstone for future treatment of complex field environments. The aim of this study is to summary chromium toxicity, factors affecting microbial remediation, and methods for enhancing bioremediation. However, the actual application of bioremediation technology is still facing a major challenge. This study also put forward the current research problems and proposed future research directions, providing theoretical guidance and scientific basis for the application of bioremediation technology.

Recent Application of Deep Eutectic Solvents as Green Solvent in Dispersive Liquid-Liquid Microextraction of Trace Level Chemical Contaminants in Food and Water

As growing concerns on green, cost-effective, and time-saving chemistry analysis methods, deep eutectic solvents (DESs) are considered to be promising green alternatives to conventional solvents in dispersive liquid-liquid microextraction (DLLME) of trace level chemical contaminants in food and water, due to their biodegradability, low cost, and simple preparation. In the past few years, numerous innovative researches have focused on preconcentration of trace level chemical contaminants using DESs as extractant. In this context, this review aims to summarize the updated state-of-the-art effort dedicated to preconcentration of trace level chemical contaminants in food and water sample using DESs as extractants in DLLME. Furthermore, the major impact factors affecting the preconcentration efficiency and process mechanisms are thoroughly analyzed and discussed. Finally, prospects and challenges in application of DESs as solvents in DLLME to enrich trace level chemical contaminants are extensively elucidated and critically reviewed.