Removal of Cr(VI) from wastewater by artificial zeolite spheres loaded with nano Fe-Al bimetallic oxide in constructed wetland

Preparation of 6-Amino-N-hydroxyhexanamide-Modified Porous Chelating Resin for Adsorption of Heavy Metal Ions

The pollution of water bodies by heavy metal ions has recently become a global concern. In this experiment, a novel chelating resin, D851-6-AHHA, was synthesized by grafting 6-amino-N-hydroxyhexanamide (6-AHHA) onto the (-CH2N-(CH2COOH)2) group of the D851 resin, which contained a hydroxamic acid group, amide group, and some carboxyl groups. This resin was developed for the purpose of removing heavy metal ions, such as Cr(III) and Pb(II), from water. The findings from static adsorption experiments demonstrated the remarkable adsorption effectiveness of D851-6-AHHA resin towards Cr(III) and Pb(II). Specifically, the maximum adsorption capacities for Cr(III) and Pb(II) were determined to be 91.50 mg/g and 611.92 mg/g, respectively. Furthermore, the adsorption kinetics of heavy metal ions by D851-6-AHHA resin followed the quasi-second-order kinetic model, while the adsorption isotherms followed the Langmuir model. These findings suggest that the adsorption process was characterized by monolayer chemisorption. The adsorption mechanism of D851-6-AHHA resin was comprehensively investigated through SEM, XRD, FT-IR, and XPS analyses, revealing a high efficiency of D851-6-AHHA resin in adsorbing Cr(III) and Pb(II). Specifically, the (-C(=O)NHOH) group exhibited a notable affinity for Cr(III) and Pb(II), forming stable multi-elemental ring structures with them. Additionally, dynamic adsorption experiments conducted using fixed-bed setups further validated the effectiveness of D851-6-AHHA resin in removing heavy metal ions from aqueous solutions. In conclusion, the experimental findings underscored the efficacy of D851-6-AHHA resin as a highly efficient adsorbent for remediating water bodies contaminated by heavy metal ions.

Chitosan-based foam composites for hexavalent chromium remediation: Effect of microcellulose and crosslinking agent content

Potentially toxic metal ions, such as hexavalent chromium (Cr6+), present in water concern the population's health due to their persistence, bioaccumulation potential, and high toxicity. Highly porous materials based on polysaccharides are promising technologies for metal removal due to their high surface area, biodegradability, and low toxicity. This study evaluated the effect of concentrations of microcellulose (0.5, 1, and 1.5 %) and glutaraldehyde (1, 2, and 3 %) in the adsorption capacity and mechanical properties of chitosan foams. The developed foams exhibited a three-dimensional structure with interconnected pores. Compared to foams without microcellulose, adding 1.5 % microcellulose increased up to 180 % in maximum stress supported by the foams and up to 135 % in Young's modulus. However, Cr6+ sorption capacity decreased with increasing microcellulose and crosslinking agent content due to the occupation of amino groups. Still, the foams exhibited a highly favorable sorption behavior, and the Sips isotherm model provided the best fit to the experimental data. The maximum sorption capacity reached approximately 1.4 mmol·g-1 at pH 4.0 and 25 °C. The foam structural integrity, enhanced mechanical properties, and efficient sorption capacity make them viable alternatives for environmentally friendly and cost-effective treatment of water contaminated with Cr6+ ions.

Development and trends of constructed wetland substrates over the past 30 years: a literature visualization analysis based on CiteSpace

Constructed wetland substrates (CWSs) have received considerable attention owing to their importance in adsorbing and degrading pollutants, providing growth attachment points for microorganisms, and supporting wetland plants. There are differences in the configurations and functions of constructed wetlands (CWs) for treating different water bodies and sewage, resulting in a wide variety of substrates. Research on the application and mechanism of CWSs is not sufficiently systematic. Therefore, the current research advancements and hotspots must be identified. Hence, we used CiteSpace to analyze 1955 English publications from the core collection database of the Web of Science to assess the current state of the CWS research field. Based on the cooperative network analysis, the roles of various countries, institutions, and authors in research on CWSs were reviewed. Keyword co-occurrence and cluster analyses were used to discuss the transformation of CWSs from removing traditional pollutants to emerging pollutants and the transition from incorporating natural substrates to artificial substrates. Finally, we underscored the need for more emphasis to be placed on the collocation and application of the CWSs at different latitudes. Furthermore, the substrate micro-interface process and its effects on the interaction patterns of pollutants and microorganisms should be thoroughly investigated to provide theoretical guidance for the development of wetland applications and mechanisms.

The potential of zeolite nanocomposites in removing microplastics, ammonia, and trace metals from wastewater and their role in phytoremediation

Nanocomposites are emerging as a new generation of materials that can be used to combat water pollution. Zeolite-based nanocomposites consisting of combinations of metals, metal oxides, carbon materials, and polymers are particularly effective for separating and adsorbing multiple contaminants from water. This review presents the potential of zeolite-based nanocomposites for eliminating a range of toxic organic and inorganic substances, dyes, heavy metals, microplastics, and ammonia from water. The review emphasizes that nanocomposites offer enhanced mechanical, catalytic, adsorptive, and porosity properties necessary for sustainable water purification techniques compared to individual composite materials. The adsorption potential of several zeolite-metal/metal oxide/polymer-based composites for heavy metals, anionic/cationic dyes, microplastics, ammonia, and other organic contaminants ranges between approximately 81 and over 99%. However, zeolite substrates or zeolite-amended soil have limited benefits for hyperaccumulators, which have been utilized for phytoremediation. Further research is needed to evaluate the potential of zeolite-based composites for phytoremediation. Additionally, the development of nanocomposites with enhanced adsorption capacity would be necessary for more effective removal of pollutants.

Fe(II)/LXQ-10 bifunctional resin materials for boosting synergistic adsorption/oxidation of benzene in industrial waste gas

A series of adsorption/oxidation bifunctional material with different Fe(II) loading amounts was prepared by using ultrahigh crosslinking adsorption resin (LXQ-10) as a carrier and FeCl2 as an impregnating solution. The bifunctional material was characterized by BET, SEM, XRD, XPS, and EPR. The effects of Fe loading, reaction temperature, and space velocity on benzene adsorption efficiency were investigated using self-made experimental equipment to explore the optimal reaction condition. The adsorption results were fitted and analyzed by using four typical models: the quasi-first-order kinetic model, the quasi-second-order kinetic model, Elovich's kinetic model, and the Weber and Morris kinetic model. The quasi-first-order kinetic model had the highest R2 value (0.998) and the best applicability. The fitting effect of the Freundlich equation (R2 = 0.997) was better than that of the Langmuir equation (R2 = 0.919). Furthermore, the effects of Fe loading, H2O2 concentration, benzene inlet concentration, and temperature on the catalytic oxidation efficiency of benzene were studied. The catalytic oxidation efficiency of 3-Fe(II)/LXQ-10 was maintained at about 95% at a temperature of 303 K and an H2O2 concentration of 150 mmol/L. Compared with the adsorption efficiency, the catalytic oxidation efficiency of bifunctional resin materials in a heterogeneous Fenton system was remarkably improved and had excellent stability. A possible migration and transformation path during benzene removal was proposed according to the results of the analysis of GC-MS intermediates. This study provided a novel process for the adsorption and oxidative degradation of VOCs.

Enhanced effect and mechanism of nano Fe-Ca bimetallic oxide modified substrate on Cu(II) and Ni(II) removal in constructed wetland

In this study, Fe₂O₃ nanoparticles (Fe₂O₃ NPs) and CaO NPs were loaded on the zeolite sphere carrier to create nano Fe-Ca bimetallic oxide (Fe-Ca-NBMO) modified substrate, which was introduced into constructed wetland (CW) to remove Cu(II) and Ni(II) via constructing "substrate-microorganism" system. Adsorption experiments showed that the equilibrium adsorption capacities of Fe-Ca-NBMO modified substrate for Cu(II) and Ni(II) were respectively 706.48 and 410.59 mg/kg at an initial concentration of 20 mg/L, 2.45 and 2.39 times of gravel. The Cu(II) and Ni(II) removal efficiencies in CW with Fe-Ca-NBMO modified substrate respectively reached 99.7% and 99.9% at an influent concentration of 100 mg/L, significantly higher than those in gravel-based CW (47.0% and 34.3%). Fe-Ca-NBMO modified substrate could promote Cu(II) and Ni(II) removal by increasing electrostatic adsorption, chemical precipitation, as well as the abundances of resistant microorganisms (Geobacter, Desulfuromonas, Zoogloea, Dechloromonas, and Desulfobacter) and functional genes (copA, cusABC, ABC.CD.P, gshB, and exbB). This study provided an effective method to enhance Cu(II) and Ni(II) removal of electroplating wastewater by CW with Fe-Ca-NBMO modified substrate.

A Comprehensive Review of the Current Progress of Chromium Removal Methods from Aqueous Solution

Chromium (Cr) exists in aqueous solution as trivalent (Cr³⁺) and hexavalent (Cr⁶⁺) forms. Cr³⁺ is an essential trace element while Cr⁶⁺ is a dangerous and carcinogenic element, which is of great concern globally due to its extensive applications in various industrial processes such as textiles, manufacturing of inks, dyes, paints, and pigments, electroplating, stainless steel, leather, tanning, and wood preservation, among others. Cr³⁺ in wastewater can be transformed into Cr⁶⁺ when it enters the environment. Therefore, research on Cr remediation from water has attracted much attention recently. A number of methods such as adsorption, electrochemical treatment, physico-chemical methods, biological removal, and membrane filtration have been devised for efficient Cr removal from water. This review comprehensively demonstrated the Cr removal technologies in the literature to date. The advantages and disadvantages of Cr removal methods were also described. Future research directions are suggested and provide the application of adsorbents for Cr removal from waters.

Fe-Al bimetallic oxides functionalized-biochar via ball milling for enhanced adsorption of tetracycline in water

The clusters formed by modified materials on its surface makes the application of functionalized biochars in adsorption face a great challenge. Here, a facile ball milling technology was innovatively proposed to tailor Fe-Al oxides-laden bagasse biochar to fabricate a novel adsorbent (BMFA-BC). Benefited from the increased exposure of Fe-Al oxides and, more importantly, enhanced functional groups by ball milling, the adsorption capacity of BMFA-BC for aqueous tetracycline reached up to 116.6 mg g^-1 at 298 K. And the adsorption performance was temperature-dependent. Characterization analysis, batch sorption (thermodynamics, kinetics, isotherms, chemical factors) as well as data modeling illustrated that this superior adsorption ability could be attributed to π-π conjugation, H-bonding, complexation as well as pore filling. BMFA-BC displayed good adsorption capacity in multiple aqueous environments. The excellent regeneration ability, magnetic susceptibility ensured its viability for sustainable pollutants removal. These superiorities revealed that BMFA-BC was a suitable sorbent for antibiotics elimination.

Zeolite/ZnAl-layer double hydroxides with different Zn/Al ratios and intercalated anions as the substrate of constructed wetlands: synthesis, characterization and purification effect of Hexavalent chromium

The study aimed to synthesize novel zeolite substrates modified with four types of ZnAl-LDHs including Cl-LDHs(1:1), Cl-LDHs(3:1), CO₃-LDHs(1:1), and CO₃-LDHs(3:1); investigate Cr(VI) removal efficiencies in lab-scale constructed wetlands (CWs); and explore the effect of different Zn/Al ratios and intercalated anions on the removal efficiencies of Cr(VI) by modified zeolite. Different ZnAl-LDHs were prepared by co-precipitation method and coated onto the surface of original zeolite. Field emission scanning electron microscope and energy dispersive spectrometer were used to analyze physicochemical properties of zeolite/ZnAl-LDHs. Obtained results confirmed the successful LDHs-coating modification. The results of both X-ray diffraction and Fourier transform infrared suggested that the typical diffraction peak and functional groups of ZnAl-LDHs were detected in modified zeolites, and the peak of CO₃^2- in CO₃-LDHs at 1362 cm^-1 was stronger and sharper than Cl-LDHs. It could be demonstrated by above results that the synthesis crystallinity and coating effect of CO₃-LDHs was better than Cl-LDHs. Furthermore, it could be found that under the condition of same intercalated anion, LDHs with metal molar ratio of 1:1 had better crystallinity than LDHs with metal molar ratio of 3: 1. Subsequent determination of the removal performance of Cr(VI) by purification experiments revealed that zeolite/Cl-LDHs(3:1) showed the best Cr(VI) removal performance, and the removal rate of Cr(VI) was improved by 32.81% compared with the original zeolite, which suggested that could be an efficient substrate of CWs for Cr(VI) removal. The high crystallinity indicated that the structure of LDHs was stable and it was difficult to remove Cr(VI) by ion exchange. The above explained why the Cr(VI) removal efficiency by zeolite/Cl-LDHs is superior to that by zeolite/CO₃-LDHs under the condition of same metal molar ratio. With the increase of metal molar ratio, the charge density of LDHs layers and intercalated anion increased, thus enhancing the electrostatic attraction of LDHs layers to Cr(VI) and the interlayer anion exchange capacity. However, the effect of charge density on Cr(VI) removal efficiency may be greater than crystallinity on removal efficiency, which could be responsible for the fact that zeolite/ZnAl-LDHs(3:1) had better Cr(VI) removal efficiency than zeolite/ZnAl-LDHs(1:1) under the condition of same intercalated anion.

Ultrasonic-assisted preparation of interlaced layered hydrotalcite (U-Fe/Al-LDH) for high-efficiency removal of Cr(VI): Enhancing adsorption-coupled reduction capacity and stability

Cr(VI) contamination in aquatic systems has been a challenge for environmental science researchers. To environmental-friendly, stable, and efficiently remove Cr (VI), a novel layered double hydroxide was prepared through the ultrasonic-assisted co-precipitation method. The ultrasonic-assisted step prevented the Fe²⁺ oxidation, improved the morphology and performance, and finally, the adsorption-coupled reduction capacity and stability were enhanced. By adding U-Fe/Al-LDH (1.0 g/L) for Cr(VI) (100 mg/L), the removal rate reached 82.24%. The removal data were well fitted by the pseudo-second-order kinetic and Langmuir isotherm model. Using U-Fe/Al-LDH can be performed over a wide pH range (2-10), with a theoretical maximum removal capacity of 118.65 mg/g. The Cr(VI) with high toxicity was adsorbed and reduced to low-toxicity Cr(III). In the final phase, stable Cr(III) complex precipitates were generated. After 30 days, the dynamic leaching amounts of total Cr in used U-Fe/Al-LDH-2 were 0.1052 mg/L. Combined with the results of the influence experiment of coexisting anions and oxidants and the SO₄^2- release experiment, the stability of the removal effect and the safety of U-Fe/Al-LDH were proved. In conclusion, U-Fe/Al-LDH-2 is a promising remediation agent and a feasible Cr(VI) removal method for the practical remediation.

Immobilization of chromium enhanced by arbuscular mycorrhizal fungi in semi-aquatic habitats with biochar addition

Arbuscular mycorrhizal fungi (AMF) exhibit great potential in heavy-metal immobilization in semi-aquatic habitats. Under high heavy-metal stress, however, the role of AMF is limited, and the detoxification mechanism of AMF in heavy metals' stabilization remains unclear. This study investigated the effects of AMF on a wetland plant (Iris pseudacorus) and chromium (Cr) immobilization at different water depths in semi-aquatic habitats with biochar addition. Results showed that AMF increased the physiological and photosynthetic functions in I. pseudacorus under Cr exposures. Besides, AMF alleviated the accumulation of reactive oxygen species and lipid peroxidation by enhancing the antioxidant enzyme activities. AMF and biochar significantly decreased Cr concentrations in outlet water and increased Cr accumulation in I. pseudacorus. Besides, biochar also vastly improved Cr accumulation in the substrate under the fluctuating water depth. AMF reduced Cr bioavailability in the substrate, with Cr (Ⅵ) concentrations and acid-soluble forms of Cr decreased by 0.3-64.5% and 19.0-40.8%, respectively. Micro-proton-induced X-ray emission was used to determine element localization and revealed that AMF improved the nutrients uptake by wetland plants and inhibited Cr translocation from roots to shoots. Overall, this study demonstrated that the interaction between AMF and biochar could significantly enhance the immobilization of high Cr concentrations in semi-aquatic habitats.

Comprehensive Review on Zeolite-Based Nanocomposites for Treatment of Effluents from Wastewater

All humans and animals need access to clean water in their daily lives. Unfortunately, we are facing water scarcity in several places around the world, and, intentionally or unintentionally, we are contaminating the water in a number of ways. The rise in population, globalization, and industrialization has simultaneously given rise to the generation of wastewater. The pollutants in wastewater, such as organic contaminants, heavy metals, agrochemicals, radioactive pollutants, etc., can cause various ailments as well as environmental damage. In addition to the existing pollutants, a number of new pollutants are now being produced by developing industries. To address this issue, we require some emerging tools and materials to remove effluents from wastewater. Zeolites are the porous aluminosilicates that have been used for the effective pollutant removal for a long time owing to their extraordinary adsorption and ion-exchange properties, which make them available for the removal of a variety of contaminants. However, zeolite alone shows much less photocatalytic efficiency, therefore, different photoactive materials are being doped with zeolites to enhance their photocatalytic efficiency. The fabrication of zeolite-based composites is emerging due to their powerful results as adsorbents, ion-exchangers, and additional benefits as good photocatalysts. This review highlights the types, synthesis and removal mechanisms of zeolite-based materials for wastewater treatment with the basic knowledge about zeolites and wastewater along with the research gaps, which gives a quality background of worldwide research on this topic for future developments.

Enhanced removal of heavy metals and metalloids by constructed wetlands: A review of approaches and mechanisms

Constructed wetlands (CWs) are increasingly employed to remediate heavy metal and metalloid (HMM)-polluted water. However, the disadvantages of HMM removal by conventional CWs (without enhancement), such as an unstable and unpredictable removal efficiency, hinder the reliability of this technology. The objective of this study was to review research on enhanced CWs for HMM removal. In particular, we performed a bibliometric analysis to evaluate research trends, critical literature, and keyword evolution in recent years. Subsequently, we reviewed various enhanced approaches for the application of CWs for the removal of HMMs, including the use of improved substrates, aquatic macrophytes, microorganisms, bioelectrochemical coupling systems, hybrid CW, external additives, and operation parameters. Furthermore, the main mechanisms underlying HMM removal by these approaches are summarized. Our review clearly reveals that research on the remediation of HMM-polluted water via CW technology is receiving increased attention, with no apparent trends in topics. The selection of appropriate enhanced approaches or operation parameters as well as methodological improvements should be based on the dominant environmental conditions of the CW column and removal mechanisms for the targeted HMMs. Based on the established literature, several suggestions are proposed to guide the optimization of the design and operation of efficient CWs for the treatment of HMM-polluted water.

Adsorption and Reduction of Aqueous Cr by FeS-Modified Fe-Al Layered Double Hydroxide

To remedy the widespread chromium (Cr) pollution in the environment, this study mainly used the ultrasonic-assisted co-precipitation and precipitation methods to prepare FeS-modified Fe-Al-layered double hydroxide (FeS/LDH) composite material. The experimental results showed that FeS/LDH has higher removal efficiency of Cr in aqueous solution and stronger anti-interference ability than unmodified LDH. Under the same reaction conditions, the removal efficiency of total Cr(Cr(T)) using LDH was 34.85%, and the removal efficiency of Cr(VI) was 46.76%. For FeS/LDH, the removal efficiency of Cr(T) and Cr(VI) reached 99.57% and 100%, respectively. The restoration of Cr(T) and Cr(VI) by FeS/LDH satisfied the Langmuir adsorption isotherm. The maximum adsorption capacity of Cr(T) and Cr(VI) achieved 102.9 mg/g and 147.7 mg/g. The efficient removal of Cr by FeS/LDH was mainly based on the triple synergistic effect of anion exchange between Cr(VI) and interlayer anions, redox of Cr(VI) with Fe2+ and S2−, and co-precipitation of Fe3+ and Cr3+.

Materials in constructed wetlands for wastewater remediation: A review

The wastewater treatment industry is constantly evolving to abate emerging contaminants and to meet stringent legislative requirements. The existing technologies need to be modified, or new innovative treatment techniques need to be developed to ensure environmental protection and secure sustainability in the future. Emphasis is mainly on nutrient recovery, energy-efficient systems, zero waste generation, and environmentally friendly techniques. Constructed wetlands (CWs) have evolved as natural, eco-friendly, economical, and low-maintenance alternatives for wastewater remediation. These wetlands employ several materials as adsorbents for the treatment, commonly known as media/substrate. This review paper presents an assessment of various materials that can be used as substrates in CWs for the efficient removal of organic and non-biodegradable pollutants in different types of wastewaters. The effect of pH, mineral composition, specific surface area, and porosity of various natural materials and agricultural and industrial wastes used as media in CWs for wastewater remediation was discussed. The study showed that different substrates like alum sludge, limestone, coal slags, rice husk, and sand had removal efficiency for chemical oxygen demand (COD): 71.8%-82%, total phosphorous (TP): 77%-80%, and total nitrogen (TN): 52%-82% for different types of wastewaters. It also highlights the challenges related to the long-term sustainability of these materials. PRACTITIONER POINTS: Physicochemical characteristics influence the removal efficiency of the materials Life of media is also important along with removal efficiency and cost The sustainability of materials is very crucial for the overall performance of the system.

Gold-silver nanoparticles modified electrochemical sensor array for simultaneous determination of chromium(III) and chromium(VI) in wastewater samples

The oxidation state of ions is a crucial aspect that often has been overlooked when determining the toxicity of chromium (Cr) species in environmental samples. In this study, a novel electrochemical sensor array based on gold-silver nanoparticles modified electrodes was developed for simultaneous determination of the two main chromium species (Cr(III) and (VI)). Specifically, the working electrodes of screen-printed carbon electrodes (SPCEs) were modified with silver-gold bimetallic nanoparticles through electrochemical deposition for detection of Cr(VI). The silver-gold bimetallic nanoparticles were further oxidized to form stable silver-gold bimetallic oxide nanoparticles for the detection of Cr(III). The results showed that the addition of silver with a theoretical value of 1% of gold could contribute to the formation and stabilization of oxides on the surface of gold nanoparticles. After characterization, the two kinds of electrodes were integrated as an electrochemical sensor array for selective and sensitive detection of Cr(VI) and Cr(III). The linear range and limit of detection (LOD, identified by three times of signal-to-noise ratio) were found to be 0.05-5 ppm and 0.1 ppb for Cr(VI), and 0.05-1 ppm and 0.1 ppb for Cr(III), respectively. Finally, the electrochemical sensor array was proven for successful detection of Cr(VI) and Cr(III) in tap water, artificial saliva and artificial sweat samples, and monitoring of Cr(VI) and Cr(III) in chromium-containing wastewater treatment process. Combined with a handheld dual-channel electrochemical device, the simultaneous determination of Cr(VI), Cr(III) and total chromium contents can be easily achieved for various samples.

Cu-Fe embedded cross-linked 3D hydrogel for enhanced reductive removal of Cr(VI): Characterization, performance, and mechanisms

Porous hydrogel, as a high-efficiency adsorbent for heavy metals, suffers the drawbacks of the use of expensive and toxic reagents during the process of preparation, further limiting its application ranges. Besides, the heavy metals couldn't be transformed into nontoxic species, which leads to the environmental pollution risk. Herein, a three-dimensionally (3D) structured Cu-Fe embedded cross-linked cellulose hydrogel (nFeCu-CH) was innovatively fabricated by a novel self-assembly and in-situ reduction method, which exhibited exceptionally enhanced adsorption-reduction property towards Cr(VI) wastewater. The results of degradation experiment exhibited that the removal reaction followed Langmuir-Hinshelwood first order kinetic model and the degradation rate constant decreased with solution pH and initial Cr(VI) concentration, while increased with nFeCu-CH dosage and temperature. Regeneration studies demonstrated that more than 88% of Cr(VI) was removed by nFeCu-CH even after five times of cycling. nFeCu-CH exhibited excellent reductive activity, which had a close connection with the superiority of 3D crosslinked architectures and bimetallic synergistic effect. And 97.1% of Cr(VI) could be removed when nFeCu-CH dosage was 9.5 g/L, pH was 5, initial concentration of Cr(VI) was 20 mg/L and temperature was 303 K. Combined with cellulose hydrogel not only could provide additional active sites, but also could restrain the crystallite growth and agglomeration of nano-metallic particles, leading to the promotion of Cr(VI) removal. In addition, coating with Cu facilitated the generation and transformation of electrons according to the continuous redox cycles of Fe(III)/Fe(II) and Cu(II)/Cu(I), leading to the further improvement of the reductivity of nFeCu-CH. Multiple interaction mechanisms including adsorption, reduction and co-precipitation between nFeCu-CH and Cr(VI) were realized. The current work suggested that nFeCu-CH with highly reactive sites, excellent stability and recyclability was considered as an potential material for remediation of Cr(VI) contaminated wastewater.

Environmental footprint of voltammetric sensors based on screen-printed electrodes: An assessment towards "green" sensor manufacturing

Voltammetric sensors based on screen-printed electrodes (SPEs) await diverse applications in environmental monitoring, food, agricultural and biomedical analysis. However, due to the single-use and disposable characteristics of SPEs and the scale of measurements performed, their environmental impacts should be considered. A life cycle assessment was conducted to evaluate the environmental footprint of SPEs manufactured using various substrate materials (SMs: cotton textile, HDPE plastic, Kraft paper, graphic paper, glass, and ceramic) and electrode materials (EMs: platinum, gold, silver, copper, carbon black, and carbon nanotubes (CNTs)). The greatest environmental impact was observed when cotton textile was used as SM. HDPE plastic demonstrated the least impact (13 out of 19 categories), followed by ceramic, glass and paper. However, considering the end-of-life scenarios and release of microplastics into the environment, ceramic, glass or paper could be the most suitable options for SMs. Amongst the EMs, the replacement of metals, especially noble metals, by carbon-based EMs greatly reduces the environmental footprint of SPEs. Compared with other materials, carbon black was the least impactful on the environment. On the other hand, copper and waste-derived CNTs (WCNTs) showed low impacts except for terrestrial ecotoxicity and human toxicity (non-cancer) potentials. In comparison to commercial CNTs (CCNTs), WCNTs demonstrated lower environmental footprint and comparable voltammetric performance in heavy metal detections, justifying the substitution of CCNTs with WCNTs in commercial applications. In conclusion, a combination of carbon black or WCNTs EMs with ceramic, glass or paper SMs represents the most environmentally friendly SPE configurations for voltammetric sensor arrangement.

Effect of substrate types on contaminant removals, electrochemical characteristics and microbial community in vertical flow constructed wetlands for treatment of urban sewage

The purpose of this study was to investigate the influence of substrates (quartz sand and coke) on the removal of pollutants (COD, NH₄⁺-N and TP), electrochemical characteristics and microbial communities of vertical flow constructed wetlands (VFCW) under high pollutant loads. During operation, the removal rates of COD, NH₄⁺-N and TP by VFCW-C (coke as substrate) were higher than that of VFCW-Q (quartz sand as substrate) by 9.73-19.41%, 5.03%-13.15% and 8.83%-14.58%, respectively. And the resistances of the VFCW-Q and VFCW-C were increased by 1228.9 Ω and 38.3 Ω, while their potentials were dropped from 182.4 mV to 377.9 mV-85.6 mV and 222.0 mV, respectively. The dominant bacteria at the bottoms of VFCW-Q and VFCW-C were individually aerobic denitrifying bacteria (ADNB; 14.98%)/ammonia oxidizing bacteria (AOB; 5.73%) and organics aerobic degrading bacteria (OADB; 12.48%)/ammonia oxidizing bacteria (AOB; 7.24%), while the predominant bacteria at their tops were separately ADNB (11.36%)/OADB (10.52%)/AOB (4.69%) and ADNB (15.09%)/AOB (8.86%) and OADB (3.20%) The removal of pollutants by VFCW-Q and VFCW-C may be mainly attributed to substrate adsorption and microbial degradation.