Enhanced aqueous Cr(VI) removal using chitosan-modified magnetic biochars derived from bamboo residues

Exploring nanomaterial-modified biochar for environmental remediation applications

Environmental pollution, particularly from heavy metals and toxic elements, poses a significant threat to both human health and ecological systems. While various remediation technologies exist, there is an urgent need for cost-effective and sustainable solutions. Biochar, a carbon-rich product derived from the pyrolysis of organic matter, has emerged as a promising material for environmental remediation. However, its pristine form has limitations, such as low adsorption capacities, a relatively narrow range of pH adaptability which can limit its effectiveness in diverse environmental conditions, and a tendency to lose adsorption capacity rapidly in the presence of competing ions or organic matters. This review aims to explore the burgeoning field of nanomaterial-modified biochar, which seeks to overcome the limitations of pristine biochar. By incorporating nanomaterials, the adsorptive and reactive properties of biochar can be significantly enhanced. Such modifications, especially biochar supported with metal nanoparticles (biochar-MNPs), have shown promise in various applications, including the removal of heavy metals, organic contaminants, and other inorganic pollutants from aqueous environments, soil, and air. This review provides a comprehensive overview of the synthesis techniques, characterization methods, and applications of biochar-MNPs, as well as discusses their underlying mechanisms for contaminant removal. It also offers insights into the advantages and challenges of using nanomaterial-modified biochar for environmental remediation and suggests directions for future research.

Superior comprehensive performance of modified activated carbon as a hexavalent chromium adsorbent

The presence of hexavalent chromium species (CrVI) in wastewater from manufacturing industries such as electroplating and leather production can pose serious health hazards. To address these concerns, this study developed a novel adsorbent based on activated carbon as the primary material to attract CrVI. Activated carbon has been modified with several other components to improve its comprehensive performance, including adsorption capacity, chemical stability, collectability, and reusability. Specifically, decoration with magnetite nanoparticles made it possible to collect the adsorbent magnetically and reuse it several times. On the one hand, the addition of chitosan not only increased the chemical stability of activated carbon, especially under acidic conditions, but also enhanced the Cr adsorption capacity at pH higher than 4, where adsorption of only activated carbon was significantly decreased, probably because the protonated amino groups attracted chromate anions. In addition, the co-existence of tannic acid did not increase the adsorption capacity significantly but appeared to promote the reductive adsorption of CrVI, where the reduction of CrVI means lowering the toxicity of Cr species. It was demonstrated that activated carbon modified with magnetite, chitosan, and tannic acid exhibited superior comprehensive performance that could be repeatedly used over a wide pH range as compared to the parent activated carbon.

Removal of Cr(VI) by glutaraldehyde-crosslinked chitosan encapsulating microscale zero-valent iron: Synthesis, mechanism, and longevity

Microscale zero-valent iron (mZVI) has shown great potential for groundwater Cr(VI) remediation. However, low Cr(VI) removal capacity caused by passivation restricted the wide use of mZVI. We prepared mZVI/GCS by encapsulating mZVI in a porous glutaraldehyde-crosslinked chitosan matrix, and the formation of the passivation layer was alleviated by reducing the contact between zero-valent iron particles. The average pore diameter of mZVI/GCS was 8.775 nm, which confirmed the mesoporous characteristic of this material. Results of batch experiments demonstrated that mZVI/GCS exhibited high Cr(VI) removal efficiency in a wide range of pH (2-10) and temperature (5-35°C). Common groundwater coexisting ions slightly affected mZVI/GCS. The material showed great reusability, and the average Cr(VI) removal efficiency was 90.41% during eight cycles. In this study, we also conducted kinetics and isotherms analysis. Pseudo-second-order model was the most matched kinetics model. The Cr(VI) adsorption process was fitted by both Langmuir and Freundlich isotherms models, and the maximum Langmuir adsorption capacity of mZVI/GCS reached 243.63 mg/g, which is higher than the adsorption capacities of materials reported in most of the previous studies. Notably, the column capacity for Cr(VI) removal of a mZVI/GCS-packed column was 6.4 times higher than that of a mZVI-packed column in a 50-day experiment. Therefore, mZVI/GCS with a porous structure effectively relieved passivation problems of mZVI and showed practical application prospects as groundwater Cr(VI) remediation material with practical application prospects.

Enhanced Adsorptivity of Hexavalent Chromium in Aqueous Solutions Using CTS@nZVI Modified Wheat Straw-Derived Porous Carbon

Using KOH-modified wheat straw as the precursor, wheat straw biochar was produced through carbonization at 500 °C. Subsequently, a synthetic material containing nano-zero-valent iron (nZVI) was prepared via liquid phase reduction (nZVI-WSPC). To enhance its properties, chitosan (CTS) was used by crosslinking to form the new adsorbent named CTS@nZVI-WSPC. The impact of CTS on parameters such as mass ratio, initial pH value, and adsorbent dosage on the adsorption efficiency of Cr(VI) in solution was investigated through one-factor experiments. Isotherm adsorption and thermodynamic analysis demonstrated that the adsorption of Cr(VI) by CTS@nZVI-WSPC conforms to the Langmuir model, with a maximum adsorption capacity of 147.93 mg/g, and the adsorption process is endothermic. Kinetic analysis revealed that the adsorption process follows a pseudo-second-order kinetic model. The adsorption mechanism, as elucidated by SEM, FTIR, XPS, and XRD, suggests that the process may involve multiple mechanisms, including pore adsorption, electrostatic adsorption, chemical reduction, and surface chelation. The adsorption capacity of Cr(VI) by CTS@nZVI-WSPC remains high after five cycles. The adsorbent is simple to operate, economical, efficient, and reusable, making it a promising candidate for the treatment of Cr(VI) in water.

Novel chitosan-modified biochar prepared from a Chinese herb residue for multiple heavy metals removal: Characterization, performance and mechanism

In this study, the sorption properties of Cr(VI), As(III), and Pb(II) on chitosan-modified magnetic biochar (CMBC) derived from residues of Ligusticum chuanxiong Hort. were investigated. CMBC was found to be a valuable material for removing three heavy metals from water simultaneously. Kinetic analysis suggested Cr(VI), As(III), and Pb(II) were chemisorbed onto CMBC, while isotherm data conformed well to Langmuir model, the maximum adsorption capacity of CMBC was found to be 65.74 mg/g for Cr(VI), 49.32 mg/g for As(III), and 69.45 mg/g for Pb(II). Experiments, characterization, and density functional theory (DFT) calculations were employed to explore the mechanisms. Furthermore, CMBC demonstrated excellent removal rates of over 95% for Cr(VI), 99% for As(III) and Pb(II) from contaminated water bodies. This work shows that CMBC holds significant potential for wastewater treatment of heavy metals and provides an effective solution for the utilization of Chinese herb residues in environmental remediation.

Monodispersed and Organic Amine Modified La(OH)3 Nanocrystals for Superior Advanced Phosphate Removal

Advanced phosphate removal is critical for alleviating the serious and widespread aquatic eutrophication, strongly depending on the development of superior adsorption materials to overcome low chemical affinity and sluggish mass transfer at low phosphate concentrations. Herein, the first synthesis of monodispersed and organic amine modified lanthanum hydroxide nanocrystals (OA-La(OH)3) for advanced phosphate removal by modulating inner Helmholtz plane (IHP), is reported. These OA-La(OH)3 nanocrystals with positively charged surfaces and abundant exposed La sites exhibit specific affinity toward phosphate, delivering a maximum adsorption capacity of 168 mg P g⁻1 and a wide pH adaptability from 3.0 to 11.0, as well as a robust anti-interference performance, far surpassing those of documented phosphate removal materials. The superior phosphate removal performance of OA-La(OH)3 is attributed to its protonated organic amine in IHP, which enhances the electrostatic attraction around the adsorbent-solution interface. Impressively, OA-La(OH)3 can treat ≈5 000 and ≈3 200 bed volumes of simulated and real phosphate-containing wastewater to below extremely strict standard (0.1 mg L⁻1) in a fixed-bed adsorption mode, exhibiting great potential for advanced phosphate removal. This study offers a facile modification strategy to improve phosphate removal performance of nanoscale adsorbents, and sheds light on the structure-reactivity relationship of La-based materials.

A polyfunctionalized carbon framework composite for efficient decontamination of Cr(VI) and polycyclic aromatic nitrides from acidic wastewater

Developing multifunctional engineered adsorbents is an effective strategy for decontaminating the environment from various pollutants. In this study, a polyfunctionalized carbon-framework composite, MSC-CFM, was synthesized. The composite comprises an aromatic carbon framework enriched with various functional groups, including magnetic nanoparticles, hydroxyl, and amino groups. MSC-CFM was used to decontaminate Cr(VI) and polycyclic aromatic nitrides (p-dimethylaminoazobenzene sulfonate (DAS) and diphenyl-4, 4 '-di [sodium (azo-2 -) -1-amino-naphthalene-4-sulfonate] (DANS)) from acidic wastewater. The adsorption capacities of MSC-CFM for Cr(VI), DAS and DANS, quantified using the Langmuir isotherm model, were 161.28, 310.83, and 1566.09 mg/g, respectively. Cr(VI) and PAHs (DAS and DANS) were monolayer adsorbed controlled by chemisorption. MSC-CFM could maintain good adsorption efficiency after up to 6 adsorption and desorption cycles. The presence of polycyclic aromatic nitrides promoted the adsorption of Cr(VI) in the Cr(VI)-DAS/DANS binary systems. Removal of pollutants by MSC-CFM involved a variety of unreported reaction mechanisms, such as electrostatic attraction, redox reaction, anion exchange, intermolecular hydrogen bonding, complexation reaction, π-π interaction, and anion-π interaction. MSC-CFM, enriched with a variety of functional groups, is a promising new material for environmental protection. It has good potential for practical application in treating polluted wastewater.

Comparative effectiveness of carbon nanoparticles and biochar in alleviating copper stress in corn (Zea mays L.)

The application of carbon nanoparticles (CNPs) and biochar in agriculture for improving plant health and soil quality and alleviating metal stress offers alternative approaches to meet the ever-increasing demand for food. However, poor understanding of their roles in improving crop production under Cu stress represents a significant obstacle to their wide application in agriculture. To clarify how CNPs and biochar affect corn (Zea mays L.) seed germination, seedling growth, plant health, and nutrient uptake under different Cu stress levels, soil-less Petri-dish and greenhouse soil-based bioassays were conducted. The results revealed that CNPs and biochar stimulated corn seed germination and seedling growth. Besides, they were effective in immobilizing Cu2+ sorption in sandy soil and alleviating Cu stress for plant growth, as shown by the increased plant height and dry biomass. The plant nutrient uptake efficiency (NUE) was significantly increased by CNPs, with a maximum increase of 63.1% for N and 63.3% for K at the highest Cu2+ stress level (400 mg Cu2+ L-1). In contrast, non-significant effects on NUE were observed with biochar treatments regardless of Cu stress levels. Interestingly, CNPs significantly increased plant uptake of Cu in the Petri dish test, while biochar inhibited plant uptake of Cu under both experimental conditions. Principle component analysis (PCA) and Pearson correlation analysis indicated that CNPs mitigated Cu stress mainly by elevating antioxidant enzyme activities, enhancing plant photochemical efficiency, and increasing plant uptake of N and K, while biochar was more likely to reduce bioavailability and uptake of Cu in the plant. These findings have great implications for the application of CNPs and biochar as plant growth stimulators and de-toxicity agents in agriculture.

In situ carbothermal synthesis of carbonized bacterial cellulose embedded with nano zero-valent iron for removal of Cr(VI)

Carbonized bacterial cellulose embedded with highly dispersed nano zero-valent iron (nZVI), denoted as nZVI@CBC, was prepared through one-step in situ carbothermal treatment of bacterial cellulose adsorbing iron(III) nitrate. The structure characteristics of nZVI@CBC and its performance in removing hexavalent chromium Cr(VI) were investigated. Results showed the formation of nZVI@CBC with a surface area of 409.61 m2/g at 800 °C, with nZVI particles of mean size 28.2 nm well distributed within the fibrous network of CBC. The stability of nZVI was enhanced by its carbon coating, despite some inevitable oxidation of exposed nZVI. Batch experiments demonstrated that nZVI@CBC exhibited superior removal efficiency compared to bare nZVI and CBC. Under optimal conditions, nZVI@CBC exhibited a high Cr(VI) adsorption capacity of up to 372.42 mg/g. Therefore, nZVI@CBC shows promise as an effective adsorbent for remediating Cr(VI) pollution in water.

Conversion of locally available materials to biochar and activated carbon for drinking water treatment

For environmental sustainability and to achieve sustainable development goals (SDGs), drinking water treatment must be done at a reasonable cost with minimal environmental impact. Therefore, treating contaminated drinking water requires materials and approaches that are inexpensive, produced locally, and effortlessly. Hence, locally available materials and their derivatives, such as biochar (BC) and activated carbon (AC) were investigated thoroughly. Several researchers and their findings show that the application of locally accessible materials and their derivatives are capable of the adsorptive removal of organic and inorganic contaminants from drinking water. The application of locally available materials such as lignocellulosic materials/waste and its thermo-chemically derived products, including BC and AC were found effective in the treatment of contaminated drinking water. Thus, this review aims to thoroughly examine the latest developments in the use of locally accessible feedstocks for tailoring BC and AC, as well as their features and applications in the treatment of drinking water. We attempted to explain facts related to the potential mechanisms of BC and AC, such as complexation, co-precipitation, electrostatic interaction, and ion exchange to treat water, thereby achieving a risk-free remediation approach to polluted water. Additionally, this research offers guidance on creating efficient household treatment units based on the health risks associated with customized adsorbents and cost-benefit analyses. Lastly, this review work discusses the current obstacles for using locally accessible materials and their thermo-chemically produced by-products to purify drinking water, as well as the necessity for technological interventions.

New-style electrokinetic-adsorption remediation of cadmium-contaminated soil using double-group electrodes coupled with chitosan-activated carbon composite membranes

Global soil cadmium (Cd(II)) contamination threatens the soil environment, food safety, and human health. Conventional electrokinetic remediation (EKR) and enhancement methods usually operate in strong electric fields, leading to strong side reactions and uneven removal. In this work, to remove Cd(II) from soil effectively in a low-voltage electric field, a new-style electrokinetic-adsorption remediation using double-group electrodes coupled with chitosan-activated carbon composite membranes (DE-EKR-CAC) was developed. Chitosan-activated carbon (CAC) composite membranes were synthesized for easy recovery and reuse of adsorbents. The effects of pH, contact time, initial concentration, and foreign ions on the removal of Cd(II) by the CAC composite membranes were determined. The CAC composite membranes performed well except in a strongly acidic environment (pH = 2.0). The soil pH varied between 3.4 and 5.0 in DE-EKR-CAC, where the CAC composite membranes were applicable. High concentrations of Ca2+ interfered with the adsorption of Cd(II), which means that the selectivity of CAC composite membranes for Cd(II) is not high enough. The Langmuir (R2 = 0.999) and pseudo-second-order kinetic (R2 = 1.0) models revealed the monolayer coverage and chemisorption mechanism, and the maximum adsorption capacity was 40.81 mg/g. Furthermore, SEM, FTIR, and XPS analyses suggest that physical adsorption, complexation of oxygen-containing functional groups, chelation of amino groups, and ion exchange are potential mechanisms for the adsorption of Cd(II) on CAC. DE-EKR-CAC performed better than the group remediated with one set of electrodes, with higher removal efficiencies and more uniform removal. The lowest energy consumption was 3.33 kWh/m3, which is lower than other enhancement methods. Separation of CAC composite membranes from soil is easy, and reuse performance is good. DE-EKR-CAC provides a potential option for Cd(II) removal from soil because of its better performance using low-voltage direct current, low energy consumption, and ease of recycling the adsorbent.

Highly efficient Cr (VI) removal from electroplating wastewater by regenerable copper sulfides: Mechanism and magical induction effect for Cr resource recovery

The current sorbents used to remove Cr (VI) from electroplating wastewater are faced with some challenges including the difficulty in separating, regenerating, and safely disposing of adsorbed Cr species. To address these challenges, CuSx/TiO2 was developed to recover Cr (VI) from electroplating wastewater. CuSx/TiO2 had superior performance in removing Cr (VI), with the rate and capacity of approximately 9.36 mg g-1 h-1 and 68.8 mg g-1 at initial pH 4.0, respectively. Additionally, Cu2+ released from CuSx/TiO2 during Cr (VI) removal would come back to its external surface as the Cu(OH)2 precipitate at initial pH 4.0, which helped to prevent the generation of secondary pollution. The Cu(OH)2 precipitate would be decomposed into CuOx after calcination, which would then be transformed back into CuSx by re-sulfuration for regeneration. Hence, CuSx showed a magical induction effect on Cr (VI) recovery, and Cr (VI) from electroplating wastewater might be gradually enriched as Cr2O3 in the sandwich between CuSx and TiO2 through multiple regenerations and removals, which could be considered as a chromium ore resource for industrial applications when the amount of enriched Cr2O3 reached more than 30 wt%. Overall, CuSx/TiO2 showed great potential as a promising sorbent for Cr (VI) removal from electroplating wastewater.

Fabrication of Chitin microspheres supported sulfidated nano zerovalent iron and their performance in Cr (VI) removal

Sulfidated nanoscale zerovalent iron (S-nZVI) has been extensively studied for the reductive removal of Cr(VI), but its applicability is limited by agglomeration and unexpected efficiency reduction. In this study, chitin microsphere supported sulfidated nanoscale zero-valent iron (S-nZVI@Chi-M) was prepared by in-situ one-step reduction method and used to remove Cr(VI) from water. Compared to chitin and chitosan powder, Chi-M with nanofibrous structure and large surface area performed best in stabilizing S-nZVI with a Fe0 loading content of 3.01 wt%. The S-nZVI particles were homogeneously distributed on the surface of Chi-M, effectively avoiding agglomeration. Compared with bare nanoparticles and supported nZVI, S-nZVI@Chi-M showed significantly enhanced Cr(VI) removal capacity (924.5 mg Cr(VI) for per gram of effective Fe0). The influences of sulfidation degree, dosages, initial Cr(VI) concentration, pH, DO, humic acid and typical ions on Cr(VI) removal kinetics were further studied. S-nZVI@Chi-M could be recycled for at least 4 times with acceptable reactivity. The mechanism investigation results indicated that the Cr(VI) removal was a complex process of reduction, adsorption and co-precipitation under the synergistic effect of Chi-M and S-nZVI. This work provides new ideas for the continuous fabrication of highly reactive nanoparticles, hopefully expanding the application scope of biomass resources in pollution remediation.

Immobilization of cadmium in paddy soil using a novel active silicon-potassium amendment: a field experimental study

The rapid development of industrialization and agriculture has led to extensive environmental issues worldwide such as cadmium (Cd) pollution of paddy soils, posing a potential threat to environmental safety and food health. Therefore, there is an urgent need to reduce the Cd contents in paddy soils. In this study, a newly active silicon-potassium amendment was first prepared from potassium hydroxide-assisted potassium feldspar at a low temperature, and then was used to remediate a contaminated paddy soil by Cd over a long period. The obtained results demonstrated the effectiveness of the applied active silicon-potassium in promoting rice growth in the experimental field. In addition, soil pH values increased to 6.89-7.03, thus decreasing the bioavailability of Cd bioavailability by 8.61-13.7%. The soil enzyme activities and available nutrients (Si, Ca, Mg, N, and P) were also significantly increased. In particular, the Cd contents in the rice grains decreased from 0.279 to 0.179-0.194 mg/kg following the application of the active silicon-potassium amendment, reaching the food crop standard level of China (< 0.2 mg/kg). The detailed remediation mechanisms of the Cd-contaminated paddy soil involved several processes, including ion exchange, ligand complexation, electrostatic attraction, and precipitation. Overall, the active silicon-potassium material is a promising amendment for achieving effective control of Cd-contaminated paddy soils.

Enhanced Reactive Brilliant Blue Removal Using Chitosan-Biochar Hydrogel Beads

To address the challenges associated with the weak affinity and difficult separation of biochar, we developed chitosan-biochar hydrogel beads (CBHBs) as an efficient solution for removing reactive brilliant blue (RBB KN-R) from wastewater. The adsorption behavior and mechanism of RBB KN-R onto CBHBs were extensively studied. Notably, the adsorption capacity of RBB KN-R showed pH-dependence, and the highest adsorption capacity was observed at pH 2. The adsorption process was well fitted with the pseudo-second-order kinetic model and the intraparticle diffusion model. Film diffusion and intraparticle diffusion were both responsible for the adsorption of RBB KN-R onto CBHBs. At 298.15 K, the maximum adsorption capacity qm was determined to be 140.74 mg/g, with higher temperatures favoring the adsorption process. A complex mechanism involving π-π interactions, electrostatic attraction, hydrophobic interaction, and hydrogen bonding was found to contribute to the overall adsorption process. The experimental data discovered the coexisting substances and elevated ionic strength hindered the adsorption capacity. Significantly, after three cycles of adsorption-desorption, the CBHBs maintained an adsorption capacity above 95% for RBB KN-R. These promising results imply that CBHBs are a durable and cost-effective adsorbent for efficient removal of dyes from wastewater.

Removal of methylene blue by porous biochar obtained by KOH activation from bamboo biochar

A series of activated biochar (KBBC-700, KBBC-800 and KBBC-900) which were modified by KOH and pyrolysis at various temperatures from ball-milling bamboo powder were obtained. The physicochemical properties and pore structures of activated biochar were investigated by scanning electron microscopy (SEM), fourier transform infrared spectoscopy (FT-IR), X-ray diffraction (XRD) and N2 adsorption/desorption. The adsorption performance for the removal of methylene blue (MB) was deeply studied. The results showed that KBBC-900 obtained at activation temperature of 900 °C exhibited a great surface area which reached 562 m2/g with 0.460 cm3/g of total pore volume. The enhancement of adsorption capacity could be ascribed to the increase of surface oxygen-containing functional groups, aromatization and mesoporous channels. The adsorption capacity was up to 67.46 mg/g under the optimum adsorption parameters with 2 g/L of adsorbent dose, 11 of initial solution pH and 298 K of the reactive temperature. The adsorption capacity was 70.63% of the first time after the material was recycled for three cycles. The kinetics indicated that the adsorption equilibrium time for MB on KBBC-900 was of about 20 min with the data fitted better to the pseudo-second-order kinetics model. The adsorption process was mainly dominated by chemical adsorption. Meanwhile, the adsorption isotherm showed that the Langmuir model fitted the best, and thermodynamic parameters revealed that the adsorption reaction was the endothermic nature and the spontaneous process. Adsorption of MB mainly attributed to electrostatic interactions, cation-π electron interaction and redox reaction. This study suggested that the activated biochar obtained by KOH activation from bamboo biochar has great potentials in the practical application to remove MB from wastewater.

Removal of Cr(VI) ions from wastewater by Fe3O4-loaded porous sludge biochar

In this work, porous sludge biochar (PSBC) was prepared by molten salt-assisted pyrolysis of municipal sludge, and PSBC loaded with Fe3O4 (Fe3O4@PSBC) was synthesized by chemical precipitation. The effects of pH (2.0-10.0), sorbent dosage (0.1-2 g/L), coexisting ions (Ca2+, Mg2+, Cu2+, Pb2+, Cl-, SiO32-, NO3-, CO32-, SO42-, and PO43-), adsorption temperature (288, 298, and 308 K), initial Cr(VI) ion concentrations (50-150 mg/L), and adsorption time (5-300 min) on the removal of Cr(VI) ions by the sorbent were investigated. The mechanism of the removal of Cr(VI) ions was characterized by scanning electron microscope (SEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The result showed that the removal of Cr(VI) ions on PSBC and Fe3O4@PSBC had a strong dependence on the pH of solution. The maximum adsorption capacity of Cr(VI) ions by PSBC and Fe3O4@PSBC was 162 and 209 mg/g, respectively, at a dosage of 0.4 g/L, pH of 3, and temperature of 298 K. The removal process of Cr(VI) ions could be fitted by the Langmuir isotherm model and pseudo-second-order kinetic model. The breakthrough curves were in good agreement with the theoretical values of the Thomas model. The mechanism of the removal of Cr(VI) ions by Fe3O4@PSBC mainly contain complexation, reduction, and electrostatic interaction. This work proposes a new removal material for Cr(VI)-containing wastewater.

Surface-modified biopolymers for removing mixtures of per- and polyfluoroalkyl substances from water: Screening and removal mechanisms

Green, renewable, and sustainable materials are needed for removing per- and polyfluoroalkyl substances (PFASs) in water. Herein, we synthesized and tested alginate (ALG) and chitosan (CTN) based and polyethyleneimine (PEI) functionalized fibers/aerogels for the adsorption of mixtures of 12 PFASs (9 short- and long-chain PFAAs, GenX, and 2 precursors) from water at an initial concentration of 10 μg/L each. Out of 11 biosorbents, ALGPEI-3 and GTH CTNPEI aerogels had the best sorption performance. Through detailed characterization of the sorbents before and after PFASs sorption, it was revealed that hydrophobic interaction was the dominant mechanism controlling PFASs sorption while electrostatic interactions played a minor role. As a result, both aerogels had fast and superior sorption of relatively hydrophobic PFASs from pH 2 to 10. Even at extreme pH conditions, the aerogels retained their shape perfectly. Based upon the isotherms, the maximum adsorption capacity of ALGPEI-3 and GTH-CTNPEI aerogels towards total PFASs removal was 3045 and 12,133 mg/g, respectively. Although the sorption performance of the GTH-CTNPEI aerogel toward short chain PFAS was less than satisfactory and varied between 70 and 90% in 24 h, it may find its use in removing relatively hydrophobic PFAS at high concentrations in complex and extreme environments.

Bamboo-derived nitrogen-doping magnetic porous hydrochar coactivated by K2FeO4 and CaCO3 for phenol removal: Governing factors and mechanisms

In this study, a novel nitrogen-doped magnetic Fe-Ca codoped biochar for phenol removal was successfully fabricated via a hydrothermal and coactivation pyrolysis method. A series of adsorption process parameters (K₂FeO₄ to CaCO₃ ratio, initial phenol concentration, pH value, adsorption time, adsorbent dosage and ion strength) and adsorption models (kinetic models, isotherms and thermodynamic models) were determined using batch experiments and various analysis techniques (XRD, BET, SEM-EDX, Raman spectroscopy, VSM, FTIR and XPS) to investigate the adsorption mechanism and metal-nitrogen-carbon interaction. The biochar with a ratio of Biochar: K₂FeO₄: CaCO₃ = 3:1:1 exhibited superior properties for adsorption of phenol and had a maximum adsorption capacity of 211.73 mg/g at 298 K, C₀ = 200 mg/L, pH = 6.0 and t = 480 min. These excellent adsorption properties were due to superior physicomechanical properties (a large specific surface area (610.53 m²/g) and pore volume (0.3950 cm³/g), a well-developed pore structure (hierarchical), a high graphitization degree (I_D/I_G = 2.02), the presence of O/N-rich functional groups and Fe-Ox,Ca-Ox, N-doping, as well as synergistic activation by K₂FeO₄ and CaCO₃). The Freundlich and pseudo-second-order models effectively fit the adsorption data, indicating multilayer physicochemical adsorption. Pore filling and π-π interactions were the predominant mechanisms for phenol removal, and H-bonding interactions, Lewis-acid-base interactions, and metal complexation played an important role in enhancing phenol removal. A simple, feasible approach with application potential to organic contaminant/pollutant removal was developed in this study.

Bamboo-derived adsorbents for environmental remediation: A review of recent progress

The bamboo family of plants is one of the fastest-growing species in the world. As such, there is an abundance of bamboo residues available for exploitation, especially in southeast Asian, central African and south American regions. The preparation of efficient adsorbents from bamboo residues is an emerging exploitation pathway. Biochars, activated carbons or raw bamboo fibers embedded with nanoparticles, each class of materials has been shown to be highly efficient in adsorption processes. This review aims to summarize recent findings in the application of bamboo-based adsorbents in the removal of organic, inorganic, or gaseous pollutants. Therefore, this review first discusses the preparation methods and surface modification methodologies and their effects on the adsorbent elemental content and other basic properties. The following sections assess the recent progress in the adsorption of heavy metals, organics, and gaseous substances by bamboo-based adsorbents, focusing on the optimum adsorption capacities, adsorption mechanisms and the optimum-fitting kinetic models and isotherms. Finally, research gaps were identified and directions for future research are proposed.

Adsorption of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar to Sb3+: Application of DFT calculation

The pollution and harm of Sb³⁺ to aquatic systems is a global problem, so Sb³⁺ removal from the water environment to make sure environment safety and human beings wellbeing is of urgency. This study explored the effect of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar (CEBC) on adsorbing Sb³⁺ through batch adsorption experiments. The experiments indicated CEBC's maximum adsorption capacity to Sb³⁺ is 170.15 mg·g^-1. Meanwhile, the capacity of the original biochar (EBC) is only 9.97 mg·g^-1. Compared with EBC, CEBC contains more functional groups, such as CO, -OH and -NH₂. In addition, the pseudo-second-order kinetic model and the Langmuir model are fit to describe the kinetics and isotherms of adsorption of CEBC to Sb³⁺, which suggests that the adsorption of CEBC to Sb³⁺ is dominated by monolayer chemisorption. Density functional theory (DFT) calculations confirmed that the chelation between -NH₂ and Sb³⁺ is of significance in the adsorption process of CEBC. DFT calculations also found that the newly added -OH and CO in EBC have a synergistic enhancement effect on the absorption of Sb³⁺. The mechanism of CEBC absorbing Sb³⁺ includes electrostatic interactions, pore filling, Л-Л interactions, hydrogen bonding, functional group complexation, chelation, and oxidation. CEBC has an excellent anti-interference ability for inorganic anions (NO₃^-, SO₄^2- and Cl^-) and can also use the coexisting HA to improve its adsorption performance. In addition, CEBC has better mitigation of Sb³⁺ on the performance of Sb³⁺ about its secondary release and good reproducibility, which indicates that CEBC is a viable Sb³⁺ adsorbent.

Highly efficient removal of hexavalent chromium by magnetic Fe-C composite from reed straw and electric furnace dust waste

Reed straw and electric furnace dust (EFD) waste were used to prepare magnetic Fe-C composite (EFD&C) by co-precipitation and high-temperature activation method to remove Cr(VI) from water. The magnetic EFD&C owned a large specific surface (536.61 m²/g) and a porous structure (micropores and mesopores), and had an efficient removal capacity for Cr(VI). Under conditions of pH (2), the addition amount of EFD&C (1 g/L), the adsorption time (760 min), and the temperature (45 °C), the maximum adsorption capacity reached 111.94 mg/g. The adsorption mechanism mainly attributed to chemical adsorption (redox), Cr(VI) reduced to Cr(III) by Fe(II) and Fe(0) (from Fe₃O₄ and Fe components in EFD) and surface functional groups of -OH, C = C, C-C and O-C = O (from biochar), and secondary attributed to physical adsorption, Cr(VI) and Cr(III) (from reduced Cr(VI)) adsorbed into the porous structure of EFD&C. This study provided a feasible solution for the preparation of adsorbents for adsorbing heavy metals from iron-containing metallurgical solid waste and biomass waste, which contributed to reducing the environmental pollution and lowering the cost of adsorbent preparation.

The one-step synthesis of a novel metal-organic frameworks for efficient and selective removal of Cr(VI) and Pb(II) from wastewater: Kinetics, thermodynamics and adsorption mechanisms

The removal of Cr(VI) and Pb(II) from wastewater is one of the methods to ensure water safety. However, it is still a difficult point to design efficient and selective adsorbent. In this work, Cr(VI) and Pb(II) were removed from water by a new metal-organic frameworks material (MOF-DFSA) with numerous adsorption sites. The max adsorption capacities of MOF-DFSA were 188.12 mg/g for Cr(VI) after 120 min and 349.09 mg/g for Pb(II) within 30 min. MOF-DFSA showed good selectivity and reusability after four cycles. The adsorption of MOF-DFSA was an irreversible process with multi-site coordination, and an active site adsorbed 1.798 Cr (VI) and 0.395 Pb (II). Kinetic fitting showed that the adsorption was chemisorption and surface diffusion was the main limiting step. Thermodynamic showed that Cr(VI) adsorption was enhanced at higher temperatures by spontaneous processes while Pb(II) was weakened. The chelation and electrostatic interaction of the hydroxyl and nitrogen-containing groups of MOF-DFSA with Cr(VI) and Pb(II) is the predominant mechanism, while the reduction of Cr(VI) also play an important role in adsorption. In conclusion, MOF-DFSA was a sorbent that can be used for the removal of Cr(VI) and Pb(II).

Removal of Methylene Blue from Water Using Magnetic GTL-Derived Biosolids: Study of Adsorption Isotherms and Kinetic Models

Global waste production is significantly rising with the increase in population. Efforts are being made to utilize waste in meaningful ways and increase its economic value. This research makes one such effort by utilizing gas-to-liquid (GTL)-derived biosolids, a significant waste produced from the wastewater treatment process. To understand the surface properties, the biosolid waste (BS) that is activated directly using potassium carbonate, labelled as KBS, has been characterized using scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM-EDS), X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), and Brunauer-Emmett-Teller (BET). The characterization shows that the surface area of BS increased from 0.010 to 156 m²/g upon activation. The EDS and XPS results show an increase in the metal content after activation (especially iron); additionally, XRD revealed the presence of magnetite and potassium iron oxide upon activation. Furthermore, the magnetic field was recorded to be 0.1 mT using a tesla meter. The magnetic properties present in the activated carbon show potential for pollutant removal. Adsorption studies of methylene blue using KBS show a maximum adsorption capacity of 59.27 mg/g; the adsorption process is rapid and reaches equilibrium after 9 h. Modelling using seven different isotherm and kinetic models reveals the best fit for the Langmuir-Freundlich and Diffusion-chemisorptionmodels, respectively. Additional thermodynamic calculations conclude the adsorption system to be exothermic, spontaneous, and favoring physisorption.

Amino-functionalization of lignocellulosic biopolymer to be used as a green and sustainable adsorbent for anionic contaminant removal

In this work, natural biopolymer stemming from lignocellulosic peanut hull biomass was used as a green and low-cost adsorbent to eliminate anionic Congo red (CR) and Cr(VI) ions from aqueous sample. In order to enhance the removal performance, the lignocellulosic biopolymer was subjected to amino-modification by the graft copolymerization of (3-acrylamidopropyl) trimethylammonium chloride and N, N'-methylenebisacrylamide. The property of the prepared amino-functionalized biopolymer (AFB) was examined through FTIR, TG, SEM, particle size analysis, zeta potential determination and XPS. The adsorption efficacy of AFB for CR and Cr(VI) was tested at different pH, contact time and initial concentration. The kinetic, isotherm and thermodynamics investigations revealed that the uptakes of CR and Cr(VI) were the combination processes of chemical and physical interactions, and both endothermic in nature. The AFB exhibited good reusability without significant loss in adsorption capacity after five consecutive cycles. Mechanistic analysis indicated that the quaternary ammonium groups in AFB contributed a lot to the binding of anionic compounds through electrostatic attraction. In addition, n-π and hydrogen bonding while reduction and coordination were also responsible for the removal of CR and Cr(VI), respectively. The present study provides a favorable strategy for the removal of anionic contaminates in water by using green and sustainable lignocellulosic wastes.

One-step preparation of lignin-based magnetic biochar as bifunctional material for the efficient removal of Cr(VI) and Congo red: Performance and practical application

The lignin-based magnetic biochar (LMB) was fabricated with a facile one-step solvothermal method. The spherical Fe₃O₄ was successfully loaded on the lignin-based biochar. LMB could efficiently remove Cr(VI) and Congo red (CR) synergistically with the adsorption of biochar and the catalytic/reduction of Fe₃O₄. LMB showed a removal efficiency of 100 % for Cr(VI) (100 mg/L) at 30 min. The LMB could be a catalyst to activate persulfate (PS) to degrade CR. The LMB + PS system showed a removal efficiency of 94.3 % for CR at 60 min. Moreover, LMB could simultaneously remove 41.5 % of Cr(VI) and 91.5 % of CR in the mixed Cr(VI) and CR solution. The simulated wastewater studies showed that LMB exhibited superior high Cr(VI) (100 %) and CR (82 %) removal efficiencies with the coexistent of anions, cations, and organic matter. LMB can be effectively applied to remove Cr(VI) and CR and purify different contaminated water bodies.

Efficient and selective capture of uranium by polyethyleneimine-modified chitosan composite microspheres from radioactive nuclear waste

Uranium extraction from radioactive nuclear waste is vital for sustainable energy supply and ecological security. Herein, a polyethyleneimine-chitosan composite microspheres n-PEI/ECH-CTS (n = 0.1, 0.2, 0.3, 0.4, 0.5) were synthetized for efficient and selective uranium adsorption. The prepared chitosan microspheres with uniform size, uniform dispersion and good mechanical strength combine cost-effectiveness and environmental benefits. The 0.4-PEI/ECH-CTS exhibits the highest adsorption capacity of 380.65 mg g^-1 within only 4 h due to high nitrogen content of 6.57 mol kg^-1. The DFT calculations confirms that the optimal coordination mode of UO₂²⁺ and 0.4-PEI/ECH-CTS is one UO₂²⁺ chelated with two -NH₂ from two adsorption units, respectively. Adsorption efficiency of U(VI) from simulated nuclear wastewater achieves to 100%, and the K_d value is up to 1.1 × 10⁴ mL g^-1, which is 1.7 × 10⁴-6.1 × 10⁴ times that of coexisting ions. The C_U(VI) reduces in simulated wastewater from 10.98 mg L^-1 to 1 μg L^-1, which is well below the US Environmental Protection Agency uranium limits for drinking water (30 μg L^-1). Besides, 0.4-PEI/ECH-CTS still maintains above 95% adsorption efficiency after seven cycles. In short, the 0.4-PEI/ECH-CTS microspheres integrate high performance, practicality and cost-effectiveness, which has great advantages in practical industrial applications.

Efficient Remediation of Cadmium- and Lead-Contaminated Water by Using Fe-Modified Date Palm Waste Biochar-Based Adsorbents

Heavy metals pollution of water resources is an emerging concern worldwide and seeks immediate attention. Date palm waste was transformed into biochar (BC), which was further modified through Fe-intercalation for the production of magnetic biochar (Fe-BC) in this study. The produced BC and Fe-BC were analyzed for chemical, proximate, surface, and elemental composition. The efficiency of the produced adsorbents to decontaminate the water from Cd²⁺ and Pb²⁺ ions was investigated through kinetics and an isotherm adsorption batch trial. Kinetics adsorption data fit well with the pseudo-second order and power function model, while equilibrium data were described well with the Langmuir and Freundlich isotherms. The maximum adsorption capacity as shown by the Langmuir model was the highest for Fe-BC for both Cd²⁺ (48.44 mg g^-1) and Pb²⁺ (475.14 mg g^-1), compared with that of BC (26.78 mg g^-1 Cd²⁺ and 160.07 mg g^-1 Pb²⁺). Both materials showed higher removal of Pb (36.34% and 99.90% on BC and Fe-BC, respectively) as compared with Cd (5.23% and 12.28% on BC and Fe-BC, respectively) from a binary solution. Overall, Fe-BC was more efficient in adsorbing both of the studied metals from contaminated water. The application of Fe-BC resulted in 89% higher adsorption of Cd²⁺ and 197% higher adsorption of Pb²⁺ from aqueous media as compared to BC. Kinetics and isotherm models as well as SEM-EDS analysis of the post-adsorption adsorbents suggested multiple adsorption mechanisms including chemisorption, pore-diffusion, and electrostatic interactions.

Simultaneous removal of nitrate and heavy metals in a biofilm reactor filled with modified biochar

A biofilm reactor filled with chia seeds gum modified biochar was set up for the simultaneous removal of nitrate, cadmium and zinc from calcium-containing wastewater via denitrification and microbially-induced (calcium) carbonate precipitation. The reactor performance was studied under different conditions of pH, Cd concentration, and hydraulic retention time. The optimal removal efficiency of the reactor for NO₃^--N, Ca²⁺, Cd²⁺, and Zn²⁺ were 99.98, 79.89, 100, and 99.84 %, respectively. 3D-EEM indicated the aromatic compounds confirming the stability of the reactor. FTIR illustrated the presence of -OH, CaCO₃, C-O-C, and C-O-H indicating the precipitation and role of gum in MICP. SEM confirmed that the seed crystal induced the repeated crystallization of free metal ions. XRD showed that heavy metals were removed in the form of CaCO₃, CdCO₃, ZnCO₃, Ca₃(PO₃)₂, Cd₃(PO₃)₂, and Zn₃(PO₃)₂ co-crystallization. SEM-EDS showed the composition and distribution of elements. High-throughput sequencing showed that Curpriavidus sp. GMF1 and Ochrobactrum sp. GMC12 were the dominant bacterial species, with powerful denitrification and MICP mineralization capabilities.

The characterization of a novel magnetic biochar derived from sulfate-reducing sludge and its application for aqueous Cr(Ⅵ) removal through synergistic effects of adsorption and chemical reduction

Removal of heavy metals from the aqueous environment via physiochemical adsorption always remains a great challenge owing to the slow kinetics and low removal capacity for the conventional adsorbent. In this study, the sulfate-reducing bacteria (SRB)-rich anaerobic sludge was pyrolyzed for the preparation of magnetic biochar, i.e. SBC-20-500 (SBC: sulfate-reducing sludge-based biochar; 20 denotes the biochar dosage, namely 8 g dried sludge in 400 mL iron solution which is equal to 20 g/L; 500 represents the pyrolysis temperature, i.e. at 500 °C) with tunable pore structure and surface properties towards efficient removal of chromium (Cr (Ⅵ)). The characterization revealed that magnetic biochar SBC-20-500 exhibited higher surface area and larger pore volume compared to non-magnetic SBC-500. Batch experiments on Cr (Ⅵ) removal were performed under different biochar dosages, pH values, initial Cr (Ⅵ) concentrations and temperatures. The results illustrated that magnetic biochar demonstrated much larger Cr (Ⅵ) adsorption capacity with q_e of 5.3585 mg/g as compared to non-modified one (q_e = 0.7206 mg/g). The maximum Cr (Ⅵ) removal efficiency of SBC-20-500 reached approximately 93.7% within 24 h under the conditions of pH = 3.0, biochar dosage = 0.8 g and initial Cr (Ⅵ) concentration = 50 mg/L. The kinetic and isotherm fitting results suggested that the pseudo-second-order kinetic and Langmuir isotherm model were more suitable for describing the adsorption behavior of Cr (Ⅵ) by SBC-20-500. The XPS and FTIR results confirmed that chemical reduction of Cr (Ⅵ) to Cr (Ⅲ) also played a role in Cr (Ⅵ) removal in the presence of SBC-20-500. Moreover, the Cr (Ⅵ) removal capacity could still achieve 3.50 mg/g even after five adsorption-desorption cycles, indicating the satisfactory reusability of the as-prepared biochar. The results of this study may provide a win-win approach for simultaneous resource recovery from the wasted sulfate-reducing sludge (SRS) and highly-efficient remediation of Cr (Ⅵ)-contaminated environment.

Biofilm response and removal via the coupling of visible-light-driven photocatalysis and biodegradation in an environment of sulfamethoxazole and Cr(VI)

The widespread contamination of water systems with antibiotics and heavy metals has gained much attention. Intimately coupled visible -light-responsive photocatalysis and biodegradation (ICPB) provides a novel approach for removing such mixed pollutants. In ICPB, the photocatalysis products are biodegraded by a protected biofilm, leading to the mineralization of refractory organics. In the present study, the ICPB approach exhibited excellent photocatalytic activity and biodegradation, providing up to ∼1.27 times the degradation rate of sulfamethoxazole (SMX) and 1.16 times the Cr(VI) reduction rate of visible-light-induced photocatalysis . Three-dimensional fluorescence analysis demonstrated the synergistic ICPB effects of photocatalysis and biodegradation for removing SMX and reducing Cr(VI). In addition, the toxicity of the SMX intermediates and Cr(VI) in the ICPB process significantly decreased. The use of MoS₂/CoS₂ photocatalyst accelerated the separation of electrons and holes, with•O₂^- and h⁺ attacking SMX and e^- reducing Cr(VI), providing an effective means for enhancing the removal and mineralization of these mixed pollutants via the ICPB technique. The microbial community results demonstrate that bacteria that are conducive to pollutant removal are were enriched by the acclimation and ICPB operation processes, thus significantly improving the performance of the ICPB system.

Application of chitosan- and alginate-modified biochars in promoting the resistance to paddy soil acidification and immobilization of soil cadmium

To develop more green, practical and efficient biochar amendments for acidic soils, chitosan-modified biochar (CRB) and alginate-modified biochar (ARB) were prepared, and their effects on promoting soil pH buffering capacity (pHBC) and immobilizing cadmium (Cd) in the paddy soils were investigated through indoor incubation experiments. The results of Fourier transform infrared spectroscopy and Boehm titration indicated that the introduction of chitosan and sodium alginate effectively amplified the functional groups of the biochar, and improved acid buffering capacity of the biochar. Since there was a plateau region between pH 4.5 and 5.5 in acid-base titration curve of the CRB, adding this biochar to acidic paddy soils apparently improved the pHBC and enhanced the acidification resistance of the paddy soils. The addition of ARB enhanced the reduction reactions during submerging and weakened the oxidation reactions during draining, thus retarded the decline of paddy soil pH during drainage. Furthermore, the pH of the paddy soils with ARB addition was higher at the end of draining, which reduced the activity of soil Cd. Considering the environmental sustainability of chitosan and sodium alginate and convenience of preparation method, biochars modified with these two materials provided alternatives for acidic paddy soil amelioration and heavy metal immobilization. However, the additional experiments should be conducted under field conditions to confirm practical application effects in the future.

Corncob biochar combined with Bacillus subtilis to reduce Cd availability in low Cd-contaminated soil

Soil contamination by heavy metals such as Cd can pose a risk to the environment and human health. However, Cd is difficult to immobilize at low concentration levels in soil. Individually, Bacillus subtilis and biochar have been shown to be inefficient at immobilizing Cd in soil. In this study, corncob biochar was generated at different pyrolysis temperatures (300 °C-550 °C), and the Cd immobilization efficiency and performance of corncob biochar loaded with B. subtilis (CB@B) and corncob biochar alone (CB) were evaluated in solutions and in soil. The characterization (SEM and FTIR) of CB generated at different pyrolysis temperatures and CB generated at different pyrolysis temperatures in CB@B (300 °C-550 °C) indicated that a superior pore structure and abundant O-functional groups were obtained at a pyrolysis temperature of 400 °C for both CB@B and CB. The X-ray diffraction and X-ray photoelectron spectroscopy results indicate that the formation of Cd compounds was associated with the positive combined biosorption effect of the bacteria and biochar, electronic adsorption, activity of the O-functional groups (C[double bond, length as m-dash]O, COOH, OH, and Si-O-Si), and complexation between extracellular substances and Cd²⁺. Adsorption experiments were conducted in a solution to assess the effects of various operating parameters such as the time, pH, and adsorbent dose. The 400 °C-CB@B and 400 °C-CB samples achieved the largest reductions in the Cd concentration at 81.21% and 5.70%, respectively. Then, CaCl₂ extraction experiments were conducted in soil, and using 0.25%-CB@B, a 55.21% decrease was realized in the Cd concentration after 56 days and a 16.71% increase was realized in soil pH to 8.38. No significant difference was observed in the CB-treated groups, among which 1.0%-CB achieved the largest reduction of 26.08% after 56 days and a 3.20% increase in the soil pH to 7.41. The Tessier sequential extraction method obtained similar trends. Overall, 400 °C-CB@B demonstrated outstanding immobilization efficiency and durability, indicating that it provided a safe and nutrient-rich habitat for B. subtilis to realize a synergistic effect for Cd immobilization.

Study on the Pyrolysis and Adsorption Behavior of Activated Carbon Derived from Waste Polyester Textiles with Different Metal Salts

In this study, the effects of the catalysis of heavy metals on the pyrolysis of waste polyester textiles (WPTs) and the adsorption behaviors of the pyrolysis products of WPTs for Cr(VI) were explored. TG-DTG analysis indicated that the metal ions catalyzed the pyrolysis process by reducing the temperature of the decomposition of WPTs. The surface morphology and pore structure of the carbons were analyzed using SEM and BET. The results demonstrated that Zn-AC possessed the largest specific surface area of 847.87 m²/g. The abundant acidic functional groups on the surface of the activated carbons were proved to be involved in the Cr(VI) adsorption process via FTIR analysis. Cr(VI) adsorption experiments indicated that the adsorption process was more favorable at low pH conditions, and the maximum adsorption capacities of Zn-AC, Fe-AC, and Cu-AC for Cr(VI) were 199.07, 136.25, and 84.47 mg/g, respectively. The FTIR and XPS analyses of the carbons after Cr(VI) adsorption, combined with the adsorption kinetics and isotherm simulations, demonstrated that the adsorption mechanism includes pore filling, an electrostatic effect, a reduction reaction, and complexation. This study showed that metal salts catalyze the pyrolysis processes of WPTs, and the activated carbons derived from waste polyester textiles are promising adsorbents for Cr(VI) removal.

Fate and mechanistic insights into nanoscale zerovalent iron (nZVI) activation of sludge derived biochar reacted with Cr(VI)

While nanoscale zero-valent iron modified biochar (nZVI-BC) have been widely investigated for the removal of heavy metals, the corrosion products of nZVI and their interaction with heavy metals have not been revealed yet. In this paper, nZVI-BC was synthesized and applied for the removal of Cr(VI). Batch experiments indicated that the adsorption of Cr(VI) fit Langmuir isotherm, with the maximum removal capacity at 172.4 mg/g at pH 2.0. SEM-EDS, BET, XRD, FT-IR, Raman and XPS investigation suggested that reduction of Cr(VI) to Cr(III) was the major removal mechanism. pH played an important role on the corrosion of nZVI-BC, at pH 4.5 and 2.0, FeOOH and Fe₃O₄ were detected as the major iron oxide, respectively. Therefore, FeOOH-BC and Fe₃O₄-BC were further prepared and their interaction with Cr were studied. Combining with DFT calculations, it revealed that Fe₃O₄ has higher adsorption capacity and was responsible for the effective removal of Cr(VI) through electrostatic attraction and reduction under acidic conditions. However, Fe₃O₄ will continue to convert to the more stable FeOOH, which is the key to for the subsequent stabilization of the reduced Cr(III). The results showed that the oxide corrosion products of nZVI-BC were subjected to the environment, which will eventually affect the fate and transport of the adsorbed heavy metal.

Efficient adsorption of dyes from aqueous solution using a novel functionalized magnetic biochar: Synthesis, kinetics, isotherms, adsorption mechanism, and reusability

In this study, a novel adsorbent, dodecylbenzene sulfonic acid (DBSA) functionalized magnetic biochar (DBSA-Fe₃O₄@BC), was synthesized and used to efficiently remove dyes from aqueous solution. The results indicated that DBSA-Fe₃O₄@BC exhibited an excellent adsorption capacity for Rhodamine B (RhB), and the maximum adsorption capacity for RhB at 298 K was 367.67 mg/g, which was approximately 2.3-1.2 folds than that of BC, dodecylsulfonic acid functionalized biochar (DSA@BC), DBSA@BC, Fe₃O₄@BC, and DSA-Fe₃O₄@BC. The possible adsorption mechanisms for RhB adsorption by DBSA-Fe₃O₄@BC included pore filling, electrostatic attraction, H bond, and surface complexation. Importantly, structural control presented that the simultaneous introduction of alkyl and phenyl groups significantly enhanced RhB adsorption by DBSA-Fe₃O₄@BC through hydrophobic and π-π interaction. Combined ethanol (EtOH) desorption and H₂O₂ oxidation regeneration, DBSA-Fe₃O₄@BC remained high-performance for RhB adsorption after six cycles (97.44%), indicating its outstanding reusability. In summary, DBSA-Fe₃O₄@BC exhibited a prospective application for dyeing wastewater treatment.

Simultaneous removal of nitrate, tetracycline, and Pb(II) by iron oxidizing strain Zoogloea sp. FY6: Performance and mechanism

Based on the prevalence of combined antibiotics and heavy metals contamination in the aquatic environment, this study utilized a microbial approach to achieve simultaneous removal of nitrate (NO₃^--N), tetracycline (TTC), and Pb(II). Zoogloea sp. FY6 could achieve an optimal NO₃^--N removal efficiency of 91.5% under C/N ratio of 2.0, at a pH of 6.3, and Fe(II) concentration of 20.23 mg L^-1 based on response surface methodology. Additionally, strain FY6 was further found to achieve 89.9 and 81.7% removal of TTC and Pb(II) at 6 h under the optimal conditions. Finally, the results of Fluorescence excitation-emission matrix, X-ray diffraction, Fourier transform infrared spectrometer, and X-ray photoelectron spectroscopy further proved that the biologically formed nanoscale iron oxides and biological action jointly led to the removal of TTC and Pb(II). This study provided a theoretical basis for the application of microbially driven process to remove multi-pollutants in micro-polluted water bodies.

Removal of hexavalent chromium via biochar-based adsorbents: State-of-the-art, challenges, and future perspectives

Chromium originates from geogenic and extensive anthropogenic activities and significantly impacts natural ecosystems and human health. Various methods have been applied to remove hexavalent chromium (Cr(VI)) from aquatic environmental matrices, including adsorption via different adsorbents, which is considered to be the most common and low-cost approach. Biochar materials have been recognized as renewable carbon sorbents, pyrolyzed from various biomass at different temperatures under limited/no oxygen conditions for heavy metals remediation. This review summarizes the sources, chemical speciation & toxicity of Cr(VI) ions, and raw and modified biochar applications for Cr(VI) remediation from various contaminated matrices. Mechanistic understanding of Cr(VI) adsorption using different biochar-based materials through batch and saturated column adsorption experiments is documented. Electrostatic interaction and ion exchange dominate the Cr(VI) adsorption onto the biochar materials in acidic pH media. Cr(VI) ions tend to break down as HCrO₄^-, CrO₄^2-, and Cr₂O₇^2- ions in aqueous solutions. At low pH (∼1-4), the availability of HCrO₄^- ions attributes the electrostatic forces of attraction due to the available functional groups such as -NH₄⁺, -COOH, and -OH₂⁺, which encourages higher adsorption of Cr(VI). Equilibrium isotherm, kinetic, and thermodynamic models help to understand Cr(VI)-biochar interactions and their adsorption mechanism. The adsorption studies of Cr(VI) are summarized through the fixed-bed saturated column experiments and Cr-contaminated real groundwater analysis using biochar-based sorbents for practical applicability. This review highlights the significant challenges in biochar-based material applications as green, renewable, and cost-effective adsorbents for the remediation of Cr(VI). Further recommendations and future scope for the implications of advanced novel biochar materials for Cr(VI) removal and other heavy metals are elegantly discussed.

Cellulose-based aerogel beads for efficient adsorption-reduction-sequestration of Cr(VI)

The reduction and sequestration of toxic Cr(VI) via a one-step process in an aqueous solution is critical to eliminate its environmental risk. In this study, amine functionalized cellulose-based aerogel beads (CGP) was developed for simultaneous and efficient adsorption- reduction- sequestration of Cr(VI). CGP showed a maximum Cr(VI) adsorption capacity of 386.40 mg/g at 25 °C due to its strong electrostatic attraction towards Cr(VI). The simultaneous Cr(VI) adsorption- reduction- sequestration performance of CGP over a wide Cr(VI) concentration range was examined. The mechanism was investigated in-depth via the analysis of adsorption kinetics, XPS spectra, and FTIR spectra. Moreover, the Cr immobilization stability of CGP after adsorption was evaluated in simulated neutral, acidic, and alkaline conditions. The effect of pH, temperature, ionic strength and the presence of interfering ions on CGP adsorption performance were investigated by batch adsorption experiments. Fixed-bed column adsorption study was performed to explore the application potential of CGP beads in a wastewater treatment process.

Applications of functionalized magnetic biochar in environmental remediation: A review

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Efficient Reduction of Cr(VI) with Carbon Quantum Dots

Hexavalent chromium (Cr(VI)) pollution is a global problem, and the reduction of highly toxic Cr(VI) to less toxic Cr(III) is considered to be an effective method to address Cr(VI) pollution. In this study, low-toxicity carbon quantum dots (CQDs) were used to reduce Cr(VI) in wastewater. The results show that CQDs can directly reduce Cr(VI) at pH 2 and can achieve a reduction efficiency of 94% within 120 min. It is observed that under pH higher than 2, CQDs can activate peroxymonosulfate (PMS) to produce reactive oxygen species (ROS) for the reduction of Cr(VI) and the reduction efficiency can reach 99% within 120 min even under neutral conditions. The investigation of the mechanism shows that the hydroxyl groups on the surface of CQDs can be directly oxidized by Cr(VI) because of the higher redox potential of Cr(VI) at pH 2. As the pH increases, the carbonyl groups on the surface of CQDs can activate PMS to generate ROS, O₂ ^•-, and ¹O₂, which result in Cr(VI) being reduced. To facilitate the practical application of CQDs, the treatment of Cr(VI) in real water samples by CQDs was simulated and the method reduced Cr(VI) from an initial concentration of 5 mg/L to only 8 μg/L in 150 min, which is below the California water quality standard of 10 μg/L. The study provides a new method for the removal of Cr(VI) from wastewater and a theoretical basis for practical application.

Trivalent antimony removal using carbonaceous nanomaterial loaded with zero-valent bimetal (iron/copper) and their effect on seed growth

As rapid industrial and social growth, antimony mines are the overexploited, leading to the accumulation of trivalent antimony in the aquatic environment near smelters, which harm human health. To eradicate trivalent antimony from water, an innovative nanomaterial in the form of sludge biochar loaded with zero-valent bimetal was synthesized using a liquid-phase reduction method. The adsorption performance of the nanomaterial for trivalent antimony was investigated based on a series of adsorption experiments using sludge biochar, nano zero-valent iron biochar, and nano zero-valent bimetal biochar. The results showed that the optimal adsorption performance of the three nanomaterials for trivalent antimony, considering the economic practicability, was highlighted at solution pH of 3 and 0.05 g of nanomaterial. Additionally, the maximum adsorption capacity of sludge biochar, nano zero-valent iron biochar, and nano zero-valent bimetal biochar is 3.89 mg g^-1 at 35 °C, 32.01 mg g^-1 at 25 °C, 50.96 mg g^-1 at 25 °C, respectively. The adsorption process of sludge biochar is endothermic, resulting in an increase in the adsorption capacity with increasing temperature, whereas the exothermic reaction contributes to decrease in the adsorption capacity at increasing temperature for the other two carbon nanomaterials. The inhibitory effect of coexisting ions was in the order: Al³⁺ > NH₄⁺ > Na⁺ > K⁺; CO₃^2- > CH₃COO^- > H₂PO₄^- > S^2-. Additionally, nanomaterials promoted seed germination and growth. Investigation of the adsorption mechanism using X-ray photoelectron spectroscopy showed that trivalent antimony was oxidised to pentavalent antimony, and Fe(III) was reduced to Fe(II). The formed primary battery formed by copper ions and iron acclerated electron transfer and improved the adsorption rate. This implied that trivalent antimony could be removed through the synergistic action of the adsorption behaviour and redox reaction. Therefore, the biochar loaded with the zero-valent bimetal serves as a pathway for eradicating trivalent antimony.

Research progress in the removal of heavy metals by modified chitosan

Chitosan and its modifiers have been widely studied for their good biocompatibility and excellent adsorption properties for heavy metal ions. The synthesis and application of modified chitosan, the effects of process variables (such as pH, amount of adsorbent, temperature, contact time, etc.), adsorption kinetics, thermodynamics and the adsorption mechanism on the removal of heavy metal ions are reviewed. The purpose is to provide the latest information about chitosan as adsorbent and to promote the synthesis of modified chitosan and its application in the removal of heavy metals.