Visible-light-driven photoelectrocatalytic activation of chloride by nanoporous MoS2@BiVO4 photoanode for enhanced degradation of bisphenol A

Acceleration of Fenton-like Reaction by Bimetal-Mediated Sludge Biochar for Tetracycline Removal

The production of sludge biochar (SBC) from residual sludge offers a solution to the challenges associated with sludge disposal and facilitates the reutilization of resources. In the present research, a bimetallic-modified sludge biochar, designated as FeCu-SBC, was synthesized by varying the doping ratios of FeSO4 and CuSO4. This material was intended for the effective degradation of tetracycline (TC) in aqueous environments via the activation of peroxydisulfate. The FeCu2-SBC (90% degradation rate) composite, synthesized through the incorporation of Fe and Cu in a 1:2 ratio with SBC, exhibited a degradation rate of TC, which was 2.7 times higher than that of SBC (32.85% degradation rate) and 1.8 times higher than that of FeCu (50% degradation rate). Research examining the mechanisms involved revealed that FeCu underwent degradation solely through the radical (•OH) pathway, whereas FeCu2-SBC was subject to degradation through both radical (SO4•-) and nonradical (1O2) pathways. This phenomenon was attributed to the distinct π-π, C═O, and defect structures in FeCu2-SBC compared to FeCu, which facilitated the activation process leading to the production of reactive species. This investigation presented a cost-effective approach for producing bimetallic-modified sludge biochar, offering perspectives on determining the crucial elements influencing the streamlined TC degradation pathway.

Two-Dimensional Layered Heterojunctions for Photoelectrocatalysis

Two-dimensional (2D) layered nanomaterial heterostructures, arising from the combination of 2D materials with other low-dimensional species, feature a large surface area to volume ratio, which provides a high density of active sites for catalytic applications and for (photo)electrocatalysis (PEC). Meanwhile, their electronic band structure and high electrical conductivity enable efficient charge transfer (CT) between the active material and the substrate, which is essential for catalytic activity. In recent years, researchers have demonstrated the potential of a range of 2D material interfaces, such as graphene, graphitic carbon nitride (g-C3N4), metal chalcogenides (MCs), and MXenes, for (photo)electrocatalytic applications. For instance, MCs such as MoS2 and WS2 have shown excellent catalytic activity for hydrogen evolution, while graphene and MXenes have been used for the reduction of carbon dioxide to higher value chemicals. However, despite their great potential, there are still major challenges that need to be addressed to fully realize the potential of 2D materials for PEC. For example, their stability under harsh reaction conditions, as well as their scalability for large-scale production are important factors to be considered. Generating heterojunctions (HJs) by combining 2D layered structures with other nanomaterials is a promising method to improve the photoelectrocatalytic properties of the former. In this review, we inspect thoroughly the recent literature, to demonstrate the significant potential that arises from utilizing 2D layered heterostructures in PEC processes across a broad spectrum of applications, from energy conversion and storage to environmental remediation. With the ongoing research and development, it is likely that the potential of these materials will be fully expressed in the near future.

Microwave-Assisted Synthesis of MoS2/BiVO4 Heterojunction for Photocatalytic Degradation of Tetracycline Hydrochloride

Compared with traditional hydrothermal synthesis, microwave-assisted synthesis has the advantages of being faster and more energy efficient. In this work, the MoS₂/BiVO₄ heterojunction photocatalyst was synthesized by the microwave-assisted hydrothermal method within 30 min. The morphology, structure and chemical composition were characterized by X-ray diffraction (XRD), Raman, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and high-resolution transmission electron microscopy (HRTEM). The results of characterizations demonstrated that the synthesized MoS₂/BiVO₄ heterojunction was a spherical structure with dimensions in the nanorange. In addition, the photocatalytic activity of the samples was investigated by degrading tetracycline hydrochloride (TC) under visible light irradiation. Results indicated that the MoS₂/BiVO₄ heterojunction significantly improved the photocatalytic performance compared with BiVO₄ and MoS₂, in which the degradation rate of TC (5 mg L^-1) by compound where the mass ratio of MoS₂/BiVO₄ was 5 wt% (MB5) was 93.7% in 90 min, which was 2.36 times of BiVO₄. The active species capture experiments indicated that •OH, •O₂^- and h⁺ active species play a major role in the degradation of TC. The degradation mechanism and pathway of the photocatalysts were proposed through the analysis of the band structure and element valence state. Therefore, microwave technology provided a quick and efficient way to prepare MoS₂/BiVO₄ heterojunction photocatalytic efficiently.

Integrating Reactive Chlorine Species Generation with H2 Evolution in a Multifunctional Photoelectrochemical System for Low Operational Carbon Emissions Saline Sewage Treatment

Conventional wastewater treatment plants (WWTPs) suffer from high carbon emissions and are inefficient in removing emerging organic pollutants (EOPs). Consequently, we have developed a low operational carbon emissions multifunctional photoelectrochemical (PEC) system for saline sewage treatment to simultaneously remove organic pollutants, ammonia, and bacteria, coupled with H₂ evolution. A reduced BiVO₄ (r-BiVO₄) photoanode with enhanced PEC properties, ascribed to constructing sufficient oxygen vacancies and V⁴⁺ species, was synthesized for the aforementioned technique. The PEC/r-BiVO₄ process could treat saline sewage to meet local WWTPs' discharge standard in 40 min at 2.0 V vs Ag/AgCl and completely degrade carbamazepine (one of EOPs), coupled with 633 μmol of H₂ production; 93.29% reduction in operational carbon emissions and 77.82% decrease in direct emissions were achieved by the PEC/r-BiVO₄ process compared with large-scale WWTPs, attributed to the restrained generation of CH₄ and N₂O. The PEC system activated chloride ions in sewage to generate numerous reactive chlorine species and facilitate ^•OH production, promoting contaminants removal. The PEC system exhibited operational feasibility at varying pH and total suspended solids concentrations and has outstanding reusability and stability, confirming its promising practical potential. This study proposed a novel PEC reaction for reducing operational carbon emissions from saline sewage treatment.

Morphological guided sphere to dendrite BiVO4 for highly efficient organic pollutant removal and photoelectrochemical performance under solar light

Monoclinic BiVO₄ (m-BiVO₄) has been reported as promising phase for solar light driven photocatalysis. However, in the case of morphology guided BiVO₄ with different synthetic conditions maintaining the m-BiVO₄ phase remains a substantial challenge for achieving an efficient photocatalyst driven by solar light. Herein, a simple hydrothermal approach was used to produce well-defined template free m-BiVO₄ dendrites with distinct branches for photo catalytically removal of organic pollutant and photocurrent generation. The development of monoclinic dendrite BiVO₄ was confirmed after comprehensive structural, morphological, and optical examinations. FE-SEM images of m-BiVO₄ revealed transformation of spherical to dendritic morphology with distinct branches by simply changing the HNO₃ to NaOH ratios from 2:1 to 2:2, which are named as BVO 2-1 and BVO 2-2, respectively. The BVO 2-2 dendrites exhibited improved activity of 98% towards methylene blue (MB) photodegradation upon simulated solar light irradiation. The BVO 2-2 dendrites photoelectrode showed an outstanding photocurrent density of 1.4245 mAcm^-2 than that of the BVO 2-1 spherical photoelectrode (0.7367 mAcm^-2). Enhanced photocatalytic and photoelectrochemical action, could be ascribed to the unique morphological changes provides photoactive sites, harvest more light utilization together with higher separation of e^-/h⁺ pairs. Furthermore, photocatalytic mechanism is investigated based on scavenger trapping agent, valence band XPS, UV Visible DRS and PL study. Our findings could pave the way for the development of dendritic nanostructure photocatalysts with improved photocatalytic activity.

Novel assembly of BiVO4@N-Biochar nanocomposite for efficient detoxification of triclosan

The wide spread of antibacterial and antifungal agents demands in growing multifunctional materials to completely eliminate these organic contaminants in water. BiVO₄ (Bismuth vanadate) is a superior catalyst under visible light but suffers with high photoelectron-hole pair recombination rate and poor adsorption capacity which limits its efficiency. Addition of N-doped Biochar (N-Biochar) to BiVO₄ with large specific surface area and high conductivity are anticipated to overcome the problem and promote the catalytic performance. Thus, the present study developed a simple hydrothermal method to prepare BiVO₄@N-Biochar catalyst for efficient detoxification of Triclosan (TCS). The morphological analysis results suggested that BiVO₄ particles were evenly distributed on carbon surface amongst the N-Biochar matrix. Within 60 min of visible light irradiation, nearly 94.6% TCS degradation efficiency was attained by BiVO₄@N-Biochar (k = 0.02154 min^-1) while only 56.7% was attained with pure BiVO₄ (k = 0.00637 min^-1). In addition, LC-MS/MS technique was utilized to determine the TCS degradation products generation in the photodegradation process and pathway was proposed. Furthermore, the E. coli (Escherichia coli) colony forming unit assay was used to determine the biotoxicity of the degradation products in which 72.3 ± 2.6% of detoxification efficiency was achieved and suggested a substantial reduction in biotoxicity during the photodegradation.

Effect of water-oil ratio on the photocatalytic performance of visible light-active BiVO4 nanoparticles prepared by inverse microemulsion-calcination method

Nowadays, nano-photocatalysts (NPs) have become the research focus in the field of photocatalysis due to their excellent photocatalytic activity, and microemulsion is an effective method to prepare high-efficiency nano-photocatalysts. Here, BiVO₄ NPs with high efficiency under visible light were prepared by a combination of reverse microemulsion method and calcination method. XRD, SEM, TEM, XPS, DRS, PL, BET and other characterization tests were used to comprehensively explore the influence of water-oil ratio on the physicochemical properties of the catalysts. The results show that BiVO₄ NPs of monoclinic scheelite with high crystallization degree can be obtained by this method. The microscopic morphology, specific surface area and total pore volume of BiVO₄ NPs are significantly affected by the water-oil ratio. It is difficult to obtain BiVO₄ NPs with small particle size and uniform dispersion under the condition of too low or too high water-oil ratio. Meanwhile, the photogenerated carrier recombination efficiency of the catalyst is significantly improved, thus reducing the photocatalytic activity of the catalyst. Strikingly, the BiVO₄ NPs obtained under the condition of water-oil ratio is 20 exhibited well-dispersed nanospheres with diameters ranging from 80 to 100 nm. It has the highest photocatalytic activity due to its high crystallinity, large specific surface area and total pore volume and relatively low photogenerated carrier recombination efficiency. Under visible light irradiation, the degradation efficiency of RhB can reach 97.69% in 100 min, and the rate constant is 0.03253 min^-1.

Impact of Erbium (Er) and Yttrium (Y) doping on BiVO4 crystal structure towards the enhancement of photoelectrochemical water splitting and photocatalytic performance

An efficient BiVO₄nanocatalyst with Erbium (Er) and Yttrium (Y) doping was synthesized via a facile microwave irradiation route and the obtained materials were further characterized through various techniques such as p-XRD, FT-IR, FE-SEM, HR-TEM, UV-Vis DRS, PL, LSV, and EISanalysis. The obtained results revealed that the rare metals induce the stabilization of the monoclinic-tetragonal crystalline structure with a distinct morphology. The yttrium doped BiVO₄ (Y-BiVO₄) monoclinic-tetragonal exhibited anefficient photoelectrochemical water splitting and photocatalytic performanceare compared to bare BiVO₄. TheY-BiVO₄ indicated increased results of photocurrent of 0.43 mA/cm²and bare BiVO₄0.24 mA/cm². Also, the Y-doped BiVO₄ nanocatalyst showed the maximum photocatalytic activity for the degradation of MB, MO, and RhB. A maximum degradation of 93%, 85%, and 91% was achieved for MB, MO, and RhB respectively, within 180 min under the visible light illumination. The photocatalytic decomposition of acetaldehyde also was performed. The improved photoelectrochemical water splitting and photocatalytic activity are due to the narrowing the bandgap, leading to extending the photoabsorption capability and reducing the recombination rate of photoexcited electron-hole pairs through the formation inner energy state of the rare earth metals. The current study disclosed that the synthesis of nanomaterials with crystal modification could be a prospectivecontender forhydrogen energy production as well as to the photocatalytic degradation of organic pollutants.To the best of our knowledge, both photocatalytic and photoelectrochemical studies were never been reported before for this type of material.

Ultrasensitive electrochemical detection of furazolidone in biological samples using 1D-2D BiVO4@MoS2 hierarchical nano-heterojunction composites armed electrodes

In this work, the hydrothermally synthesized of BiVO₄@MoS₂ hierarchical nano-heterojunction composite is employed as a novel electrocatalyst for electrochemical sensing of Furazolidone (FZE) drug by modifying the glassy carbon electrodes (GCE). The Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy are used to thoroughly investigate the functional groups, vibrational modes, crystal structure, elemental composition and surface topography of the heterojunction composite. The physical characterization results revealed the successful construction of 1D-2D BiVO₄@MoS₂ hierarchical nano-heterojunction composite. When these unique architectures are reinforced on GCE surface, we achieved an enhanced electroactive surface area of 0.154 cm². The electrochemical performance of 1D-2D BiVO₄@MoS₂ is examined though cyclic voltammetry and differential pulse voltammetry (DPV) analysis. The BiVO₄@MoS₂ composites exhibited an excellent electrocatalytic activity in sensing of FZE with superior linear detection ranges of 0.01-14 and 14-614 μM. The limit of detection (LOD) of the BiVO₄@MoS₂ based sensor is determined to be 2.9 nM which is far superior than other reported FZE sensors. Consequently, it is evident from the investigation that the BiVO₄@MoS₂ based FZE sensor can be recommended for analyzing real time samples like human urine and blood serum with appreciable recovery.

Improving Wastewater Treatment by Triboelectric-Photo/Electric Coupling Effect

The ability to meet higher effluent quality requirements and the reduction of energy consumption are the biggest challenges in wastewater treatment worldwide. A large proportion of the energy generated during wastewater treatment processes is neglected and lost in traditional wastewater treatment plants. As a type of energy harvesting system, triboelectric nanogenerators (TENGs) can extensively harvest the microscale energies generated from wastewater treatment procedures and auxiliary devices. This harvested energy can be utilized to improve the removal efficiency of pollutants through photo/electric catalysis, which has considerable potential application value in wastewater treatment plants. This paper gives an overall review of the generated potential energies (e.g., water wave energy, wind energy, and acoustic energy) that can be harvested at various stages of the wastewater treatment process and introduces the application of TENG devices for the collection of these neglected energies during wastewater treatment. Furthermore, the mechanisms and catalytic performances of TENGs coupled with photo/electric catalysis (e.g., electrocatalysis, photoelectric catalysis) are discussed to realize higher pollutant removal efficiencies and lower energy consumption. Then, a thorough, detailed investigation of TENG devices, electrode materials, and their coupled applications is summarized. Finally, the intimate coupling of self-powered photoelectric catalysis and biodegradation is proposed to further improve removal efficiencies in wastewater treatment. This concept is conducive to improving knowledge about the underlying mechanisms and extending applications of TENGs in wastewater treatment to better solve the problems of energy demand in the future.

Removal of Paracetamol from Aqueous Solutions by Photocatalytic Ozonation over TiO2-MexOy Thin Films

Analgesics and nonsteroidal anti-inflammatory drugs (NSAIDs) such as paracetamol, diclofenac, and ibuprofen are frequently encountered in surface and ground water, thereby posing a significant risk to aquatic ecosystems. Our study reports the catalytic performances of nanosystems TiO2-MexOy (Me = Ce, Sn) prepared by the sol-gel method and deposited onto glass slides by a dip-coating approach in the removal of paracetamol from aqueous solutions by catalytic ozonation. The effect of catalyst type and operation parameters on oxidation efficiency was assessed. In addition to improving this process, the present work simplifies it by avoiding the difficult step of catalyst separation. It was found that the thin films were capable of removing all pollutants from target compounds to the oxidation products.

Efficient degradation of bisphenol A with MoS2/BiVO4 hetero-nanoflower as a heterogenous peroxymonosulfate activator under visible-light irradiation

Photocatalyst activated peroxymonosulfate (PMS) under visible-light irradiation to construct a photo-Fenton system has shown great application prospect for environmental remediation. In this study, MoS₂/BiVO₄ heterojunction nanoflowers were successfully synthesized by hydrothermal method and used to activate PMS under visible-light to achieve highly efficient degradation of bisphenol A (BPA). The constructed heterojunction showed excellent catalytic activity, which was attributed to the synergistic effect of effective separation of charge carriers and PMS activation. In the MoS₂/BiVO₄/PMS/vis system, 2-MoS₂/BiVO₄ (2-MB) exhibited the highest degradation rate constant for BPA (0.1747 min^-1), which was 91.9 times of pure MoS₂ and 38.0 times of pure BiVO₄, respectively. The electron paramagnetic resonance (EPR) and radical quenching experiments demonstrated that the oxidative degradation of BPA was mainly participated by SO₄^-, OH, ¹O₂ and h⁺ active species. Through the analysis of energy band structure and element valence state of photocatalyst and the identification of reaction intermediates, the degradation mechanism and degradation pathways were proposed. In addition, MoS₂/BiVO₄ heterojunction showed high catalytic ability for various organic pollutants (herbicides, pesticide intermediates, antibiotics and dyes), and common anions (Cl^-, SO₄^2- and NO₃^-) and humic acid (HA) had little effect on its degradation efficiency. This study has provided a new solution for the use of heterojunction photocatalysts for visible-light assisted PMS activation to achieve highly efficient degradation of organic pollutants.

In-situ fabrication of novel flower like MoS2/CoTiO3 nanorod heterostructures for the recyclable degradation of ciprofloxacin and bisphenol A under sunlight

Effectual degradation of toxic water contaminants is a crucial step in water purification and designing an efficient semiconductor based hybrid structure photocatalyst is a good approach to achieve this. Benefiting from the combination of semiconductors, a series of novel visible-light active flower-like MoS₂/CoTiO₃ nanorod heterostructures with excellent morphological contact interface were prepared through a facile in-situ hydrothermal process. These heterostructures were well characterized and demonstrated high photocatalytic performance for ciprofloxacin (CIP) and bisphenol A (BPA) under sunlight irradiation. Compared to pristine CoTiO₃ and MoS₂, the optimal catalyst (5 wt% MoS₂/CoTiO₃) presented 39.97 and 22.32 times higher activity for CIP degradation and 26.85 and 15.66 times higher activity for BPA degradation, respectively. This improved activity can be accounted for the effective interfacial contact which promotes the efficient charge carriers separation and reduce its recombination. The catalyst exhibited decent stability and was potentially reused for five cycles without significant loss in activity. Furthermore, based on active species scavenging experiments the plausible photodegradation mechanism is discussed in detail.

Ultrasonic role to activate persulfate/chlorite with foamed zero-valent-iron: Sonochemical applications and induced mechanisms

The novel system, consisting of composite oxidants (persulfate/chlorite, S2O82-/ClO2-) and stationary phase activator (zero-valent-iron foam, Fe0f) driven by ultrasonic (US) field, was applied to treat the triphenylmethane derivative effectively even at low temperature (≈ 289 K). By comparisons of sub-systems, the US roles to S2O82-, ClO2-, and Fe0f were seriatim analyzed. US made the reaction order of multi-component system tend to within 1 (leading to de-order reaction), and widened pH activating range of the Fe0f by sonicate-polishing during the process of ClO2- co-activating S2O82-. US and Fe0f were affected by fluid eddy on activating S2O82-/ClO2-. The Fe0f had slight effect on the temperature of US bubble-water interface but the addition of ClO2- lowered it. The partitioning capacity of the above US reactive zone increased during the reaction. US and ClO2- could enrich the kinds of degradation intermediates. The contributions of free radicals (ClOx-based radicals, sulfate radicals (SO4-), and hydroxyl radicals (OH)) and non-free radicals (ClO2, and O = FeIV/V from ionic Fe under "-O-O-" of S2O82- and cyclic adjustment reaction of ClO2-) processes by sonochemical induction were equally important by corresponding detection means. Especially, real-time and online high-resolution mass spectrum by self-developing further confirmed the chain transfers of different free radicals due to US role. The findings expanded the application of sono-persulfate-based systems and improved understanding on activation mechanism.

Efficient catalytic ozonation of bisphenol A by three-dimensional mesoporous CeOx-loaded SBA-16

Herein, we demonstrated the construction of three-dimensional (3D) cerium oxide (CeO_x)/SBA-16 nanocomposites for efficient removal of bisphenol A (BPA) via a catalytic ozonation, with a high BPA mineralization up to 60.9% in 90 min. On one hand, the CeO_x/SBA-16 mesoporous structured materials presented large surface area and uniform pore distribution, which was conducive to the adsorption of transformation by-products (TBPs) and then, the mass transfer. On the other hand, CeO_x/SBA-16 could enhance the ozone utilization efficiency and meanwhile facilitate the formation of OH, the main reactive oxygen species. Through the exploration of dissoluble organic matters and the identification of the reaction intermediates, two BPA degradation pathways were proposed. This approach reported here will benefit the design and construction of mesoporous structured materials for catalytic elimination of hazards to remediate the environment.

Mulberry-like BiVO4 architectures: synthesis, characterization and their application in photocatalysis

Mulberry-like BiVO₄ architectures were prepared by a facile solvothermal route. The obtained architectures showed enhanced light absorption, high photocatalytic properties, good stability and reusability.