Characteristics and sources of volatile organic compounds during high ozone episodes: A case study at a site in the eastern Guanzhong Plain, China

Characteristics and source apportionment of ambient volatile organic compounds and ozone generation sensitivity in urban Jiaozuo, China

In recent years, many cities have taken measures to reduce volatile organic compounds (VOCs), an important precursor of ozone (O3), to alleviate O3 pollution in China. 116 VOC species were measured by online and offline methods in the urban area of Jiaozuo from May to October in 2021 to analyze the compositional characteristics. VOC sources were analyzed by a positive matrix factorization (PMF) model, and the sensitivity of ozone generation was determined by ozone isopleth plotting research (OZIPR) simulation. The results showed that the average volume concentration of total VOCs was 30.54 ppbv and showed a bimodal feature due to the rush-hour traffic in the morning and at nightfall. The most dominant VOC groups were oxygenated VOCs (OVOCs, 29.3%) and alkanes (26.7%), and the most abundant VOC species were acetone and acetylene. However, based on the maximum incremental reactivity (MIR) method, the major VOC groups in terms of ozone formation potential (OFP) contribution were OVOCs (68.09 µg/m3, 31.5%), aromatics (62.90 µg/m3, 29.1%) and alkene/alkynes (54.90 µg/m3, 25.4%). This indicates that the control of OVOCs, aromatics and alkene/alkynes should take priority. Five sources of VOCs were quantified by PMF, including fixed sources of fossil fuel combustion (27.8%), industrial processes (25.9%), vehicle exhaust (19.7%), natural and secondary formation (13.9%) and solvent usage (12.7%). The empirical kinetic modeling approach (EKMA) curve obtained by OZIPR on O3 exceedance days indicated that the O3 sensitivity varied in different months. The results provide theoretical support for O3 pollution prevention and control in Jiaozuo.

Tibetan Plateau is vulnerable to aromatic-related photochemical pollution and health threats: A case study in Lhasa

Anthropogenic aromatics play a key role in photochemical pollution and pose a serious threat to human health. Current knowledge on source characteristics of aromatics in the urban region of the Tibetan Plateau (TP), the "Third Pole" and ecologically sensitive area, remains limited. In this study, an intensive observation of 17 aromatic hydrocarbons was conducted in Lhasa, the cultural and economic center of TP, during the second Tibetan Plateau Scientific Expedition and Research in summer 2020. The results showed that the average concentration of aromatics in Lhasa (7.6 ± 7.4 ppbv) was unexpectedly higher than those in megacities such as Beijing, Shanghai, and Guangzhou. Tripled concentrations and corresponding ozone formation potential during pollution episodes were recorded. Further source apportionment using positive matrix factorization revealed that solvent usage (60.0 %) was the dominant source, which may be due to the extremely low atmospheric pressure. Vehicle exhaust (15.4 %), industrial emissions (12.8 %), fuel evaporation (6.2 %), and burning emissions (5.7 %) were also important sources. The concentration weighted trajectory analysis revealed that the observed high levels of aromatics were mainly driven by local anthropogenic emissions, rather than the regional transport by the Indian summer monsoon. Long-term exposure to aromatics in Lhasa was assessed to pose carcinogenic risks to the population, with the risks of benzene and ethylbenzene 5 times the criteria. Our results suggest that, given the magnified emissions of aromatics in this extreme environment (low atmospheric pressure and strong solar radiation), the implementation of targeted pollution controls is urgently needed to mitigate the aromatic-related photochemical pollution and health threats in TP.

Abundant oxygenated volatile organic compounds and their contribution to photochemical pollution in subtropical Hong Kong

Volatile organic compounds (VOCs), which are ubiquitous pollutants in the urban and regional atmosphere, promote the formation of ozone (O3) and secondary organic aerosols, thereby significantly affecting the air quality and human health. The ambient VOCs at a coastal suburban site in Hong Kong were continuously measured using proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS) from November 2020 to December 2020. 83 VOC species, including 23 CxHy, 53 CxHyO1-3, and 7 nitrogen-containing species, were measured during the campaign, with a mean concentration of 36.75 ppb. Oxygenated VOCs (OVOCs) accounted for most (77.4%) of the measured species, including CxHyO1 (50.7%) and CxHyO2 (25.1%). The measured VOC species exhibited distinct temporal and diurnal variations. High concentrations of isoprene and OVOCs were measured in autumn with more active photochemistry, whereas large evening peaks of aromatics from local and regional primary emissions were prominent in winter. The OH reactivity and O3 formation potential (OFP) of key precursors were quantified. OVOCs contributed about half of the total OH reactivity and OFP, followed by alkenes and aromatics, and the contribution of aromatics increased significantly in winter. The potential source contribution function was used to investigate the potential source regions associated with high VOC concentrations. Through positive matrix factorization analysis, six major sources were identified based on fingerprint molecules. The contributions of biogenic sources and secondary formation to the observed species were notable in late autumn, whereas vehicle emissions and solid fuel combustion had higher contributions in winter. The findings highlight the important role of OVOCs in photochemical pollution and provide valuable insights for the development of effective pollution control strategies.

Spatiotemporal characteristics of ozone and the formation sensitivity over the Fenwei Plain

High surface ozone (O₃) levels affect human and environmental health. The Fenwei Plain (FWP), one of the critical regions for China's "Blue Sky Protection Campaign", has reported severe O₃ pollution. This study investigates the spatiotemporal properties and the causes of O₃ pollution over the FWP using high-resolution data from the TROPOspheric Monitoring Instrument (TROPOMI) from 2019 to 2021. This study characterizes spatial and temporal variations in O₃ concentration by linking O₃ columns and surface monitoring using a trained deep forest machine learning model. O₃ concentrations in summer were 2-3 times higher than those found in winter due to higher temperatures and greater solar irradiation. The spatial distributions of O₃ correlate with the solar radiation showing decreased trends from the northeastern to the southwestern FWP, with the highest O₃ values in Shanxi Province and the lowest in Shaanxi Province. For urban areas, croplands and grasslands, the O₃ photochemistry in summer is NO_x-limited or in the transitional regime, while it is VOC-limited in winter and other seasons. Reducing NO_x emissions would be effective for decreasing O₃ levels in summer, while VOC reductions are necessary for winter. The annual cycle in vegetated areas included both NO_x-limited and transitional regimes, indicating the importance of NO_x controls to protect ecosystems. The O₃ response to limiting precursors shown here is of importance for optimizing control strategies and is illustrated by emission changes during the 2020 COVID-19 outbreak.

Strong relations of peroxyacetyl nitrate (PAN) formation to alkene and nitrous acid during various episodes

Peroxyacetyl nitrate (PAN) is one of the critical secondary pollutants in photochemical smog. This study investigated the relationship between PAN and PAN precursors with the Regional Atmospheric Chemical Mechanism version 2 model in six episodes recorded in Zhengzhou. In all episodes, peroxyacetyl radical (PA) was primarily produced by acetaldehyde oxidation, with more than 70% contributions. In photochemical episodes and photochemical-haze co-occurring episodes (combined episodes), methylglyoxal secondarily contributes 8.1%-10.6% to PA while in haze pollution, the propagation of other radicals to PA is the second most important source (12.0%-19.1%). Among anthropogenic non-methane hydrocarbons, alkene restricted PAN formation as first-generation precursors, with the relative incremental reactivity of PAN (RIR_PAN) more than 0.6 during three-type episodes. Nitrous acid (HONO) also played important role in PAN formation. Especially during photochemical episodes, RIR_PAN(HONO) reached 0.79, which was comparable to the RIR_PAN value of alkene. Through sensitivity analysis of the relative formation of PAN to O₃ (the amount of PAN generated when 100 ppb O₃ formed), HONO was identified as the key precursor of PAN in haze pollution by promoting the oxidation of NMHC, while alkene predominated the relative formation of PAN to O₃ in photochemical and combined pollution through producing acetaldehyde. The sensitivity of PAN to HONO is obviously enhanced with higher NOx/VOC ratios during photochemical and combined pollution.

Integrating ambient carbonyl compounds provides insight into the constrained ozone formation chemistry in Zibo city of the North China Plain

Quantifying the impact of carbonyl compounds (carbonyls) on ozone (O₃) photochemical formation is crucial to formulating targeted O₃ mitigation strategies. To investigate the emission source of ambient carbonyls and their integrated observational constraint on the impact of O₃ formation chemistry, a field campaign was conducted in an industrial city (Zibo) of the North China Plain from August to September 2020. The site-to-site variations of OH reactivity for carbonyls were in accordance with the sequence of Beijiao (BJ, urban, 4.4 s^-1) > Xindian (XD, suburban, 4.2 s^-1) > Tianzhen (TZ, suburban, 1.6 s^-1). A 0-D box model (MCMv3.3.1) was applied to assess the O₃-precursor relationship influenced by measured carbonyls. It was found that without carbonyls constraint, the O₃ photochemical production of the three sites was underestimated to varying degrees, and the biases of overestimating the VOC-limited degree were also identified through a sensitivity test to NO_x emission changes, which may be associated with the reactivity of carbonyls. In addition, the results of the positive matrix factorization (PMF) model indicated that the main source of aldehydes and ketones was secondary formation and background (81.6% for aldehydes, 76.8% for ketones), followed by traffic emission (11.0% for aldehydes, 14.0% for ketones). Incorporated with the box model, we found that biogenic emission contributed the most to the O₃ production at the three sites, followed by traffic emission as well as industry and solvent usage. Meanwhile, the relative incremental reactivity (RIR) values of O₃ precursor groups from diverse VOC emission sources featured consistencies and differences at the three sites, which further highlights the importance of the synergetic mitigation of target O₃ precursors at regional and local scales. This study will help to provide targeted policy-guiding O₃ control strategies for other regions.

Development of Quinary Layered Double Hydroxide-Derived High-Entropy Oxides for Toluene Catalytic Removal

In this work, a novel method for the preparation of high-entropy oxides (HEO) was successfully developed using multivariate composition layered double hydroxides (LDHs) as precursor. Thermal treatment over 600 °C led to the complete transformation of LDHs to single spinel phase HEOs. The performance of the obtained HEO catalysts in the removal of volatile organic compounds (VOCs) was studied with the catalytic oxidation of toluene as the probe reaction. The optimized HEO-600 catalyst showed impressive activity and stability over toluene catalytic oxidation, which resulted from the vast quantity of surface oxygen vacancies and the relative variable metal valence. The T50 and T90 values of HEO-600 were 246 and 254 °C, and the T90 value only presented a slight increase to 265 °C after a 10-cycle test. This work developed a simple way to obtain HEO materials and provide technical support for the application of HEO catalysts for VOCs removal.

Characteristics and sources analysis of ambient volatile organic compounds in a typical industrial park: Implications for ozone formation in 2022 Asian Games

In this study, volatile organic compounds (VOCs) at a major industrial park in Yangtze River Delta Region, China, along with an urban site had been investigated for three years (2018-2020). The daily-mean concentration of total 97 VOCs in the industrial park (224.3 ± 139.1 μg/m³) was about twice that of urban site (112.0 ± 64.2 μg/m³). Halohydrocarbons were predominant VOCs species at both sites accounting for 39.0 % and 32.2 % in industrial and urban sites, respectively. Annual-average concentrations of total VOCs slowed down gradually in industrial park, while that of the urban site increased annually. Evident seasonal and diurnal variations were observed for VOCs concentration in both sites. Higher VOCs concentrations appeared in summer for industrial park, and high concentrations generally appeared at 8:00 and 19:00-20:00 in two sites. Diagnostic ratios of m/p-xylene to ethylbenzene indicated vehicle emissions and solvent volatilization were main sources of VOCs in industrial site during winter. Further positive matrix factorization identified fuel usage and industry source as major sources in industrial park and urban site, respectively. Ozone formation potential calculations showed aromatics contributed most to ozone formation, and benzyl chloride was a key species when its concentration was high. Further empirical kinetic modeling approach revealed ozone formation in industrial park was in VOCs-limited regime. Through air mass trajectory analysis, air pollutants especially ozone from industrial park will be transported to stadiums by northeast wind during the 2022 Asian Games. The reductions in VOCs emissions from industrials are highly recommended for ozone control in 2022 Asian Games.

Research progresses on VOCs emission investigations via surface and satellite observations in China

Volatile organic compounds (VOCs) are important precursors of severe pollution of ozone (O₃) and secondary organic aerosols in China. Fully understanding the VOCs emission is crucial for making regulations to improve air quality. This study reviews the published studies on atmospheric VOCs concentration observations in China and observation-based estimation of China's VOCs emission strengths and emission source structures. The results reveal that direct sampling and stainless-steel-tank sampling are the most commonly used methods for online and offline observations in China, respectively. The GC-MS/FID is the most commonly used VOCs measuring instrument in China (in 60.8% of the studies we summarized). Numerous studies conducted observation campaigns in urban areas (76.2%) than in suburban (17.1%), rural (18.1%), and background areas (14.3%) in China. Moreover, observation sites are largely set in eastern China (83.8%). Though there are published studies reporting observation-based China's VOCs emission investigation, these kinds of studies are still limited, and gaps are found between the results of top-down investigation and bottom-up inventories of VOCs emissions in China. In order to enhance the observation-based VOCs emission investigations in China, this study suggests future improvements including: (1) development of VOCs detection techniques, (2) strengthening of atmospheric VOCs observations, (3) improvement of the accuracy of observation-based VOCs emission estimations, and (4) facilitation of better VOCs emission inventories in China.

Ozone pollution in the plate and logistics capital of China: Insight into the formation, source apportionment, and regional transport

As the logistics and plate capital of China, the sources and regional transport of O₃ in Linyi are different from those in other cities because of the significant differences in industrial structure and geographical location. Twenty-five ozone pollution episodes (OPEs, 52 days) were identified in 2021, with a daily maximum 8-h moving average O₃ concentration (O_3-MDA8) of 184.5 ± 22.5 μg/m³. Oxygenated volatile organic compounds (OVOCs) and aromatics were the dominant contributors to ozone formation potential (OFP), with contributions of approximately 23.5-52.7% and 20.0-40.8%, respectively, followed by alkenes, alkanes, and alkynes. Formaldehyde, an OVOC with high concentrations emitted from the plate industry and vehicles, contributed the most to OFP (22.7 ± 5.5%), although formaldehyde concentrations only accounted for 9.4 ± 2.7% of the total non-methane hydrocarbon (NMHC) concentrations. The source apportionment results indicated that the plate industry was the dominant O₃ contributor (27.0%), followed by other sources (21.6%), vehicle-related sources (18.0%), solvent use (16.9%), liquefied petroleum gas (LPG)/natural gas (NG) (8.8%), and combustion sources (7.7%). Therefore, there is an urgent need to control the plating industry in Linyi to mitigate O₃ pollution. The backward trajectory, potential source contribution function (PSCF), and concentration weighted trajectory (CWT) models were used to identify the air mass pathways and potential source areas of air pollutants during the OPEs. O₃ pollution was predominantly affected by air masses that originated from eastern and local regions, while trajectories from the south contained the highest O₃ concentrations (207.0 μg/m³). The potential source area was from east and south Linyi during the OPEs. Therefore, it is critical to implement regional joint prevention and control measures to lower O₃ concentrations.

Emission characteristics and ozone formation potentials of VOCs from ultra-low-emission waterborne automotive painting

Automotive painting plants are important emission sources of volatile organic compounds (VOCs) that contribute significantly to ground-level ozone (O₃) pollution in atmosphere. Here, we investigated process-specified emission characteristics of VOCs, without or with advanced adsorption/incineration after-treatments, from an ultra-low-emission (ULE) waterborne painting process in a modernized automotive plant. Overall, more than 80 VOCs species were identified and sorted into seven main categories. In the stack emissions without after-treatments, oxygenated VOCs (alcohols, esters, ketones, ethers, etc.) were found to be the most abundant components (48.8%), followed by aromatic (30.9%), alkanes (16.9%) and alkenes (1.2%). Among the different VOCs species discharged to atmosphere (i.e. after adsorption/incineration after-treatments), aromatics demonstrated a predominant contribution (by 60.6%) to the total O₃ formation potentials (OFPs) despite their relatively lower abundance. Trimethylbenzene was identified to have the highest OFPs, and thus should be controlled with peculiar priority. As compared to traditional organic solvent-based painting process, the ULE waterborne process implemented in the target plant allows to reduce the OFPs from 10.7 mg m^-3 to 3 mg m^-3 (or by 72%). Additional monitoring by unmanned aerial vehicle (over more than 3000 sampling points in the plant) confirmed that the instantaneous concentrations of fugitive VOCs were well below the regulated limit value during typical working and non-working days. These findings may provide important reference for reduction of VOCs emissions and O₃ pollution from automotive painting processes.

Characteristics of volatile organic compounds in the metropolitan city of Seoul, South Korea: Diurnal variation, source identification, secondary formation of organic aerosol, and health risk

Atmospheric volatile organic compounds (VOCs) in Seoul, the capital of South Korea, have attracted increased attention owing to their emission, secondary formation, and human health risk. In this study, we collected 24 hourly samples once a month at an urban site in Seoul for a year (a total of 288 samples) using a sequential tube sampler. Analysis results revealed that toluene (9.08 ± 8.99 μg/m³) exhibited the highest annual mean concentration, followed by ethyl acetate (5.55 ± 9.09 μg/m³), m,p-xylenes (2.79 ± 4.57 μg/m³), benzene (2.37 ± 1.55 μg/m³), ethylbenzene (1.81 ± 2.27 μg/m³), and o-xylene (0.91 ± 1.47 μg/m³), indicating that these compounds accounted for 77.8-85.6% of the seasonal mean concentrations of the total (Σ₅₉) VOCs. The concentrations of the Σ₅₉ VOCs were statistically higher in spring and winter than in summer and fall because of meteorological conditions, and the concentrations of individual VOCs were higher during the daytime than nighttime owing to higher human activities during the daytime. The conditional bivariate probability function and concentration weighted trajectory analysis results suggested that domestic effects (e.g., vehicular exhaust and solvents) exhibited a dominant effect on the presence of VOCs in Seoul, as well as long-range atmospheric transport of VOCs. Further, the most important secondary organic aerosol formation potential (SOAFP) compounds included benzene, toluene, ethylbenzene, and m,p,o-xylenes, and the total SOAFP of nine VOCs accounted for 5-29% of the seasonal mean PM_2.5 concentrations. The cancer and non-cancer risks of the selected VOCs were below the tolerable (1 × 10^-4) and acceptable (Hazard quotient: HQ < 1) levels, respectively. Overall, this study highlighted the feasibility of the sequential sampling of VOCs and hybrid receptor modeling to further understand the source-receptor relationship of VOCs.

Spatio-temporal variation of ozone pollution risk and its influencing factors in China based on Geodetector and Geospatial models

Ozone (O₃) has become the primary pollutant in many cities, and high concentrations of O₃ cause significant harm to the ecological environment and human health. This study investigated the spatiotemporal distribution of surface concentrations of ozone over entire China and analyzed the influencing factors based on the geographical detector technique. Moreover, the Pearson correlation analysis was used to analyze the influence of various meteorological factors on ozone concentrations. The results showed that, on the national scale, the daily average O₃ concentration in the cities of China in 2019 was 92.441 μg/m³ and the nonattainment rate of daily average ozone was 7.98%. However, the ozone nonattainment rate was 33.33% in heavily polluted regions. The highest O₃ concentration was observed in summer, and the lowest was observed in spring. The O₃ concentrations in cities across the country showed significant spatial distribution characteristics. Among the five pollutants, the highest correlation was observed between O₃ and PM_2.5 and the lowest was observed between O₃ and SO₂. Among the metrological factors, wind speed and solar radiation are the most influencing factors, and showed positive correlation. Moreover, the annual precipitation is negatively correlated with O₃-8h concentrations. The methods and findings of this paper can be used as an aid for air pollution control programs in different regions for diminishing the risk of exposure to various air pollutants.

Immission levels and identification of sulfur dioxide sources in La Oroya city, Peruvian Andes

La Oroya is a city in the Peruvian Andes that has suffered a serious deterioration in its air quality, especially due to the high rate of sulfur dioxide (SO2) emissions, which underlines the importance of knowing its sources of contamination and variation over the years. In this sense, this study aimed to evaluate the immission levels and determine the sources of SO2 contamination in La Oroya. This analysis was performed using the hourly concentration data of SO2, and meteorological variables (wind speed and direction), which were analyzed for a period of three years (2018-2020). Graphs of time series, wind and pollutant roses, bivariate polar graphs, clustering k-means, nonparametric statistical tests, and the application of the conditional bivariate probability function were performed to analyze the data and identify the emission sources. The mean concentration of SO2 was 264.2 μg m-3 for the study period, where 55.66 and 2.37% of the evaluated days exceeded the guideline values recommended by the World Health Organization and the Peruvian Environmental Quality Standard for air for 24 h, respectively. The results showed a defined pattern for the daily and monthly variations, with peaks in the morning hours (0900-1000 h LT) and at the end of the year (December), respectively. The main sources of SO2 emissions identified were light and heavy vehicles that travel through the Central Highway, the La Oroya Metallurgical Complex, the transit of vehicles within the city, and the diesel-electric locomotives that provide cargo transportation services and tourism passenger transportation. The article attempts to contribute to the development of adequate air quality management policies.

Spatial characteristics of VOCs and their ozone and secondary organic aerosol formation potentials in autumn and winter in the Guanzhong Plain, China

As critical precursors of tropospheric ozone (O₃) and secondary organic aerosol (SOA), volatile organic compounds (VOCs) largely influence air quality in urban environments. In this study, measurements of 102 VOCs at all five major cities in the Guanzhong Plain (GZP) were conducted during Sep.09-Oct. 13, 2017 (autumn) and Nov. 14, 2017-Jan. 19, 2018 (winter) to investigate the characteristics of VOCs and their roles in O₃ and SOA formation. The average concentrations of total VOCs (TVOCs) at Xi'an (XA), Weinan (WN), Xianyang (XY), Tongchuan (TC), and Baoji (BJ) sites were in the range of 55.2-110.2 ppbv in autumn and 42.4-74.3 ppbv in winter. TVOCs concentrations were reduced by 22.4%-43.5% from autumn to winter at XA, WN and BJ. Comparatively low concentrations of TVOCs were observed in XY and TC, ranging from 53.5 to 62.7 ppbv across the sampling period. Alkanes were the major components at all sites, accounting for 26.4%-48.9% of the TVOCs during the sampling campaign, followed by aromatics (4.2%-26.4%). The average concentration of acetylene increased by a factor of up to 4.8 from autumn to winter, indicating the fuel combustion in winter heating period significantly impacted on VOCs composition in the GZP. The OH radical loss rate and maximum incremental reactivity method were employed to determine photochemical reactivities and ozone formation potentials (OFPs) of VOCs, respectively. The VOCs in XA and WN exhibited the highest reactivities in O₃ formation, with the OFP of 168-273 ppbv and the OH loss rates of 19.3-40.8 s^-1. Alkenes and aromatics primarily related to on-road and industrial emissions contributed 57.8%-76.3% to the total OFP. The contribution of aromatics to the SOA formation at all sites reached 94.1%-98.6%. Considering the potential source-area of VOCs, regional transport of VOCs occurred within the GZP cities.

Study of the Treatment of Organic Waste Gas Containing Benzene by a Low Temperature Plasma-Biological Degradation Method

Volatile organic compounds (VOCs) from the pharmaceutical and chemical industries have been a matter of concern for some years in China. Achieving efficient degradation of chlorobenzene (CB) in waste gas is difficult because of its high volatility and molecular stability. A DBD (dielectric barrier discharge) biological method was proposed to treat chlorobenzene, aiming to control high operating costs and prevent secondary pollution. In this investigation, a DBD biological method was introduced to deal with chlorobenzene by optimization of process parameters. The results showed that the degradation efficiency of chlorobenzene was close to 80% at a hydraulic retention time (HRT) of 85 s when the inlet concentration was 700 mg·m−3 for the biological method. The degradation efficiency of chlorobenzene reached 80% under a discharge voltage of 7 kV, an inlet concentration of 700 mg·m−3 and an HRT of 5.5 s. The degradation efficiency of an integrated system can be increased by 15–20% compared with that of a single biological system. Therefore, this method can be used as a new way to address chlorobenzene pollution in the pharmaceutical and chemical industries.

Sources and Seasonal Variance of Ambient Volatile Organic Compounds in the Typical Industrial City of Changzhi, Northern China

Volatile organic compounds (VOCs) emitted from industrial processes, which are major emission sources of air pollutants, could cause significant impacts on air quality. However, studies on the comprehensive analysis from sources contributing to the health risk perspective regarding ambient VOCs in industrial cities are limited. In this study, VOC samples were collected from 15 April 2018 to 19 October 2018 in Changzhi, a typical industrial city in northern China, and a total of 57 VOCs were measured for analysis. The average VOC concentrations were 54.4 µg·m−3, with the highest concentrations in autumn (58.4 µg·m−3). Ambient VOCs in spring, summer and autumn were all dominated by alkanes (66.8%), with contributions of 70.3%, 66.3% and 63.8%, respectively. The top five concentrations of total VOCs were isopentane (19.0%), ethane (9.5%), n-butane (8.1%), benzene (7.9%) and propane (5.2%), indicating that vehicle exhaust and coal combustion are the main sources of VOCs. Source apportionment by principal component analysis showed that vehicle exhaust (27.5%) and coal combustion (23.5%) were the main sources of VOCs in Changzhi, followed by industrial production (17.4%), solvent evaporation (13.5%), liquefied petroleum gas/natural gas leaking (9.5%), and biogenic emissions (8.7%). Sources of coal combustion and vehicle exhaust contributed more VOCs than industrial production. The carcinogenic risks of benzene (3.4 × 10−5) and ethylbenzene (2.2 × 10−6) were higher than the limit levels (1 × 10−6). Coal combustion contributed most (25.3%) to the carcinogenic risks because of its high VOC emissions. In an industrial city such as Changzhi, vehicle exhaust and coal combustion have become major sources of ambient air VOCs owing to the increasingly stringent industrial standards. Therefore, VOCs from vehicle exhaust and coal combustion also need to take into account mitigation measures for VOCs from the perspective of source contribution to health risk.

Ambient ozone pollution at a coal chemical industry city in the border of Loess Plateau and Mu Us Desert: characteristics, sensitivity analysis and control strategies

In this study, ambient ozone (O₃) pollution characteristics and sensitivity analysis were carried out in Yulin, a city in the central area of the Loess Plateau during 2017 to 2019 summer. O₃ concentrations increased for 2017 to 2019. Correlation and statistics analysis indicated high temperature (T > 25 °C, low relative humidity (RH < 60%), and low wind speed (WS < 3 m/s) were favorable for O₃ formation and accumulation, and the O₃ pollution days (MDA8 O₃ > 160 µg/m³) were predominantly observed when the wind was traveling from the easterly and southerly. O₃ concentration in urban area of Yulin was higher than that in background. The pollution air masses from Fenwei Plain increase the level and duration of O₃ pollution. In order to clarify the formation mechanism and source of O₃, online measurements of volatile organic compounds (VOCs) were conducted from 7 July to 10 August in 2019. The average of VOCs concentration was 26 ± 12 ppbv, and large amounts of alkenes followed by aromatics, characteristic pollutants of the coal chemical industry, were detected in the ambient air. To further measure the sensitivity, the observation-based model (OBM) simulation was conducted. Empirical Kinetic Modeling Approach (EKMA) plot and relative incremental reactivity (RIR) value indicated Yulin located on VOCs-limited regime. That implied a slight decrease of NO_x may increase O₃ concentration. When the emission reduction ratio of anthropogenic VOCs/NO_x higher than 1:1, the O₃ will decrease. O₃ control strategies analysis shows that the O₃ targets of 5% and 10% O₃ concentration reductions are achievable through precursor control, but more effort is needed to reach the 30% and 40% reduction control targets.