Presence, behaviour and removal of selected organic micropollutants through drinking water treatment

pH-Independent Selective Formation of VO2+ Motif Incorporating a Family of Hydrazone Ligands: Synthesis, Structure, and Luminescence-Based Sensing Studies toward Selective Metal Ions

Two new dioxidovanadium(V) compounds with the general formula [VVO2(L)] (L = hydrazone ligand) were synthesized using three different methods (acidic, neutral, and basic media) with either VIVOSO4. 5H2O, [VIVO(acac)2], or NH4VVO3 as the starting material and hydrazone ligands. In both cases, five coordinated V5+ ions adopted distorted square pyramidal geometry through the coordination of two oxido ligands and one hydrazone ligand. In compound 1, the presence of free hydroxyl groups stabilized the molecular species through intramolecular O-H•••N type hydrogen bond interactions. In compound 2, the free amino groups are involved in both intramolecular N-H•••N type and intermolecular N-H•••O type hydrogen bond interactions. Compound 1 showed highly selective luminescence turn-on behavior, along with a 33-nm blue shift in the presence of Al3+ ions in an aqueous medium. The experimental limit of detection (LOD) was found to be 66 nM. Whereas compound 2 showed luminescence quenching behavior in the presence of Fe3+, Al3+, and Cr3+ ions. The LODs were observed to be 312, 408, and 280 nM for Fe3+, Al3+, and Cr3+ ions, respectively. The luminescence response mechanisms of both compounds in the presence of metal ions have been correlated with molecular-level interactions.

Occurrence of pharmaceutical residues in drinking water: a systematic review

The aim of the present paper was to give a complete picture on the drinking water contamination by pharmaceutical residues all over the world. For this purpose, a systematic review was carried out for identifying all available research reporting original data resulting by sampling campaign and analysis of "real" drinking water samples to detect pharmaceutical residues. The investigated databases were PubMed, Scopus, and Web of Science. A total of 124 studies were included; among these, 33 did not find target analytes (all below the limit of detection), while the remaining 91 studies reported the presence for one or more compounds, in concentrations ranging from a few units to a few tens of nanograms. The majority of the studies were performed in Europe and the most represented categories were nonsteroidal anti-inflammatory drugs and analgesics. The most common analytical approach used is the preparation and analysis of the samples by solid-phase extraction and chromatography coupled to mass spectrometry. The main implications resulting from our review are the need for (a) further studies aimed to allow more accurate environmental, wildlife, and human health risk assessments and (b) developing integrated policies promoting less environmentally persistent drugs, the reduction of pharmaceuticals in livestock breeding, and the update of wastewater and drinking water treatment plants for a better removal of drugs and their metabolites.

Endocrine disrupting chemicals in Italian drinking water systems: Insights from a three-year investigation combining chemical and effect-based tools

Drinking water quality can be compromised by endocrine-disrupting chemicals (EDCs). Three phenolic compounds [bisphenol A (BPA), nonylphenol (NP), and 4-octylphenol (OP)] and three hormones [17β-estradiol (E2), estrone (E1), and 17α-ethinylestradiol (EE2)] were analyzed as EDCs potentially occurring in source and drinking water from three full-scale drinking water treatment plants (DWTPs) in the Romagna area (Italy) by a combined approach of HPLC-MS/MS target analysis and effect-based tests for estrogenicity and genotoxicity. The EDC removal efficiency was evaluated at different steps along the treatment process in the most advanced DWTP. NP prevailed in all samples, followed by BPA. Sporadic contamination by OP and E1/E2 appeared only in the source waters; EE2 was never detected. No estrogenic or genotoxic activity was found, except for two samples showing estrogenicity well below the effect-based trigger value suggested for drinking water safety (0.9 ng/L EEQ). BPA and NP levels were largely below the threshold value; however, increases were observed after the intermediate steps of the treatment chain. The good quality of the water relied on the last step, i.e. the activated carbon filtration. DWTPs may represent an extra source of EDCs and monitoring chemical occurrence at all steps of the process is advisable to improve efficiency.

Adsorption on activated carbon combined with ozonation for the removal of contaminants of emerging concern in drinking water

The presence of Contaminants of Emerging Concern (CECs) in drinking water is raising concern for potential negative effects on human health. Ozonation and adsorption on activated carbon are the most suitable processes for CECs removal in drinking water treatment plants (DWTPs). This study aims at evaluating the performance of ozonation and adsorption as in-series processes compared to those of the stand-alone processes, focusing on 18 compounds representative of various CECs families. No CECs spike was performed to evaluate the effectiveness of these processes towards CECs at their environmental concentrations. Adsorption isotherms were performed on water samples collected before and after the full-scale ozonation in a DWTP, testing different combinations of ozone and activated carbon doses. Generally, the combination of the two processes was beneficial (83% average removal) compared to adsorption and ozonation alone (71% and 34% average removal respectively). The effect of ozonation on adsorption depends on CECs reactivity with ozone, since ozonation improves the adsorption performance of poorly-oxidizable CECs, but worsens that of well-oxidizable compounds. The removal of organic matter, investigated by absorbance at 254 nm and fluorescence, by ozonation reduces competition for the subsequent CECs removal by adsorption (up to 20% increase of total CECs adsorption). Finally, the removal of both absorbance and fluorescence seems to be a good proxy variables for total CECs adsorption, with different relationships depending on the presence of ozonation. Conversely, it is not effective for ozonation, since the relationship depends on the reactivity of the specific CEC with ozone.

Modelling micropollutant cycle in Lake Como in a winter scenario: Implications for water use and reuse, ecosystem services, and the EU zero pollution action plan

The fate and effects of 42 pharmaceuticals was studied in Lake Como (Italy), in wastewater treatment plants delivering water to the lake, in two rivers and in potable water obtained from lake water. Lake Como is one of the deepest and largest lakes in Northern Italy, serving important ecosystem services (i.e., drinking water, recreational, industrial, irrigation uses), some of which are currently at risk giving the current water scarcity and climate change scenarios. The highest concentrations measured in lake water were those of diclofenac, followed by carbamazepine, its metabolite, and clarithromycin. The data measured allowed to calibrate and run a fugacity-based lake model, which showed that the most important chemical load generally comes from the advective water from the north of the lake, rather than from the direct wastewater treatment plant (WWTP) discharges. This indicates that only an important reduction of chemical discharge (reduced use or extensive treatment) at a drainage basin level could significantly reduce concentrations in water. This has strong implications on how to implement the EU zero pollution action plan to significantly improve water ecosystem and human health protection.

The sources and bioaccumulation of per- and polyfluoroalkyl substances in animal-derived foods and the potential risk of dietary intake

Per- and polyfluoroalkyl substances (PFAS) have attracted increasing attention due to their environmental persistence and potential toxicity. Diet is one of the main routes of human exposure to PFAS, particularly through the consumption of animal-derived foods (e.g., aquatic products, livestock and poultry, and products derived from them). This review summarizes the source, bioaccumulation, and distribution of PFAS in animal-derived foods and key influential factors. In most environmental media, perfluorooctanoic acid and perfluorooctane sulfonate are the dominant PFAS, with the levels of short-chain PFAS such as perfluorobutyric acid and perfluorohexane sulfonate surpassing them in some watersheds and coastal areas. The presence of PFAS in environmental media is mainly influenced by suspended particulate matter, microbial communities as well as temporal and spatial factors, such as season and location. Linear PFAS with long carbon chains (C ≥ 7) and sulfonic groups tend to accumulate in organisms and contribute significantly to the contamination of animal-derived foods. Furthermore, PFAS, due to their protein affinity, are prone to accumulate in the blood and protein-rich tissues such as the liver and kidney. Species differences in PFAS bioaccumulation are determined by diet, variances in protein content in the blood and tissues and species-specific activity of transport proteins. Carnivorous fish usually show higher PFAS accumulation than omnivorous fish. Poultry typically metabolize PFAS more rapidly than mammals. PFAS exposures in the processing of animal-derived foods are also attributable to the migration of PFAS from food contact materials, especially those in higher-fat content foods. The human health risk assessment of PFAS exposure from animal-derived foods suggests that frequent consumption of aquatic products potentially engender greater risks to women and minors than to adult males. The information and perspectives from this review would help to further identify the toxicity and migration mechanism of PFAS in animal-derived foods and provide information for food safety management.

Modified polymer membranes for the removal of pharmaceutical active compounds in wastewater and its mechanism-A review

Membrane technology can play a suitable role in removing pharmaceutical active compounds since it requires low energy and simple operation. Even though membrane technology has progressed for wastewater applications nowadays, modifying membranes to achieve the strong desired membrane performance is still needed. Thus, this study overviews a comprehensive insight into the application of modified polymer membranes to remove pharmaceutical active compounds from wastewater. Biotoxicity of pharmaceutical active compounds is first prescribed to gain deep insight into how membranes can remove pharmaceutical active compounds from wastewater. Then, the behavior of the diffusion mechanism can be concisely determined using mass transfer factor model that represented by β and B with value up to 2.004 g h mg-1 and 1.833 mg g-1 for organic compounds including pharmaceutical active compounds. The model refers to the adsorption of solute to attach onto acceptor sites of the membrane surface, external mass transport of solute materials from the bulk liquid to the membrane surface, and internal mass transfer to diffuse a solute toward acceptor sites of the membrane surface with evidenced up to 0.999. Different pharmaceutical compounds have different solubility and relates to the membrane hydrophilicity properties and mechanisms. Ultimately, challenges and future recommendations have been presented to view the future need to enhance membrane performance regarding fouling mitigation and recovering compounds. Afterwards, the discussion of this study is projected to play a critical role in advance of better-quality membrane technologies for removing pharmaceutical active compounds from wastewater in an eco-friendly strategy and without damaging the ecosystem.

Contamination of neonicotinoid insecticides in source water and their fate during drinking water treatment in the Dongguan section of the Pearl River

Neonicotinoid insecticides (NEOs) as well as their metabolites are highly mobile on the subsurface and can potentially contaminate drinking water sources; however, their pollution status and fate in the drinking water system remains ambiguous. In this study, six parent NEOs and two characteristic metabolites were measured in drinking water source protection area (source water, n = 52) and two related drinking water treatment plants (DWTPs) (n = 88) located in the Dongguan section of the Pearl River. The ubiquitous of NEOs was observed in source water with the mean concentration of total NEOs (ΣNEOs) at 240 ng/L. Although advanced DWTP (A-DWTP; range: 26 % to 100 %) showed better removals of ΣNEOs and all individual NEOs rather than those in conventional DWTP (C-DWTP; range: -53 % to 28 %), the removals were still low for acetamiprid (ACE, 26 %), thiacloprid (THD, 59 %), thiamethoxam (THM, 56 %) and N-desmethyl-acetamiprid (N-dm-ACE, 45 %) in A-DWTP. Removal rates were positive in chlorination (48 %), final stage of sedimentation (F-Sed, 24 %), and granular activated carbon (GAC) filter effluent (19 %) in A-DWTP. It worthy to note that ΣNEOs has high negative removal rates at the start stage of sedimentation (S-Sed, -83 %), middle stage of sedimentation (M-Sed, -47 %), and sand filter effluent (-42 %) water in C-DWTP, which resulted in negative removals of ΣNEOs (-9.6 %), imidacloprid (IMI, -22 %), clothianidin (CLO, -37 %), flupyradifurone (FLU, -76 %), and N-dm-ACE (-29 %) in C-DWTP. Residual levels of NEOs were high in source water, and their low or negative removals in DWTPs should be highly concerning. Results would fill the existing knowledge gap of NEOs in aquatic environment and provide a scientific dataset for policy-making on pollution control and environmental protection.

Pollution characteristics, ecological and health risks of herbicides in a drinking water source and its inflowing rivers in North China

This study measured the pollution characteristics and ecological and health risks of 19 herbicides found in drinking water sources and their inflowing rivers. The targeted herbicides were prevalent in the study area, but most concentrations were well below 10 ng L-1. Acetochlor and atrazine were the dominant herbicides, although their levels were much lower than previously reported. Total herbicide residual levels were greater in April than in December and increased from upstream to downstream, resulting in the highest pollution levels found in the reservoirs, likely due to herbicides delivered from upstream and dense agricultural planting in the surrounding areas. Only atrazine and ametryn presented moderate ecological risks, while the summed risk quotients (ΣRQs) of each sample were >0.1, indicated that the total herbicide levels represented a moderate risk in all samples. For the human health risks, the risk quotients (RQ) of all target herbicides, the total RQs of each sample, and estimated life-stage RQs were far smaller than the 0.2 threshold, indicating the absence of human health risks when the water was consumed at any stage of life. However, early life stages exhibited 3-6 times higher RQ values than adulthood and should not be overlooked. And crucially, the synergistic or antagonistic effects of mixed herbicides are not well understood, and further research is needed to understand the impact of these herbicides on the ecosystem and human health, particularly possible affects in early life stages, such as infants and children.

Occurrence and environmental risk assessment of 22 pesticides in Brazilian freshwaters

Pesticide contamination in water resources is a global threat. Although usually found at low concentrations, pesticides raise considerable toxicological concerns, mainly when mixtures are considered. The occurrence of 22 pesticides (2,4 D, alachlor, aldicarb, aldrin, atrazine, carbendazim, carbofuran, chlordane, chlorpyrifos, DDT, diuron, glyphosate, lindane, mancozeb, methamidophos, metolachlor, molinate, profenofos, simazine, tebuconazole, terbufos, and trifluralin) was investigated, through consolidated database information, in surface freshwaters of Brazil. Moreover, scenarios of environmental risk assessment considering isolated compounds and mixtures were performed, as well as a meta-analytic approach for toxicity purposes. Pesticides in freshwater have been reported from 719 cities (12.9% of Brazilian cities), where 179 (3.2%) showed pesticide occurrence above the limit of detection or quantification. Considering cities with more than five quantified, 16 cities were prone to environmental risks considering individual risks. However, the number increased to 117 cities when the pesticide mixture was considered. The mixture risk was driven by atrazine, chlorpyrifos, and DDT. The national maximum acceptable concentrations (MAC) for nearly all pesticides are higher than the predicted no-effect concentration (PNEC) for the species evaluated, except aldrin. Our results show the need to consider mixtures in the environmental risk assessment to avoid underestimation and review MAC to protect aquatic ecosystems. The results presented here may guide the revision of the national environmental legislation to ensure the protection of Brazilian aquatic ecosystems.

Organophosphate tri- and diesters in source water supply and drinking water treatment systems of a metropolitan city in China

The water contaminations with organophosphate triesters (tri-OPEs) and diesters (di-OPEs) have recently provoked concern. However, the distributions of these compounds in natural water sources and artificial water treatment facilities are poorly characterized. A comprehensive study was therefore performed to measure their concentrations in a water source, a long-distance water pipeline, and a drinking water treatment plant (DWTP). Eight tri-OPEs and 3 di-OPEs were found to be widely distributed, with total concentrations in source water and pipelines ranging from 290.6 to 843.9 ng/L. The most abundant pollutants were tris(1-chloro-2-propyl) phosphate (TCPP), triethyl phosphate, tri-n-butyl phosphate (TnBP), and diphenyl phosphate (DPhP). Di-OPEs appeared to be removed less efficiently in the DWTP than the parent tri-OPEs, and the elimination efficiencies of tri-OPEs were structure-dependent. Long-distance pipeline transportation had no significant effect on the distributions of tri- and di-OPEs. Statistical analysis suggested that the sources of di-OPEs and the corresponding tri-OPEs differed, as did those of DPhP and di-n-butyl phosphate. A risk analysis indicated that tri-OPEs present limited ecological risks that are mainly due to TnBP and TCPP, and that the human health risks of tri-OPEs are negligible. However, di-OPEs (especially DPhP) may increase these risks. Further studies on the risks posed by di-OPEs in aquatic environments are therefore needed.

Occurrence, fate, seasonal variability, and risk assessment of twelve triazine herbicides and eight related derivatives in source, treated, and tap water of Wuhan, Central China

Triazine herbicides have been widely used, are frequently detected in aqueous environments and soils, and can cause acute or chronic toxicity to living organisms. We collected source water samples (n = 20) originating from the Hanshui River and the Yangtze River of Wuhan section, treated water samples (n = 20), and tap water samples (n = 169) in Wuhan, Central China during 2019 for determination of twelve triazine herbicides and their eight derivatives (collectively defined as TZs) and characterizing their fate during water treatment. Eighteen of the twenty TZs were detected in the source water. Atrazine (ATZ) had the highest concentrations (median: 22.4 ng/L) in the source water samples while DACT had the highest concentrations (median: 31.4 ng/L) in the treated water. "Tryns" (ametryn, prometryn, simetryn, terbutryn) were efficiently removed by conventional water treatment, while other target analytes were not; interestingly, hydroxypropazine and prometon increased significantly accompanied by prometryn disappearance, which implicated potential transformation pathways. In addition, "tryns" might be transformed into "tons" (atraton, prometon, secbumeton, terbumeton) by ozonation. In the tap water samples, diaminochlorotriazine had the highest concentrations (median: 34.9 ng/L) among the target analytes, followed by ATZ (18.3 ng/L), hydroxyatrazine (5.17 ng/L), deethylatrazine (5.00 ng/L), hydroxypropazine (3.20 ng/L), deisopropylatrazine (2.05 ng/L), hydroxydesethylatrazine (1.68 ng/L), and others. The TZs had the highest cumulative concentration in July in the tap water samples (median: 89.7 ng/L). This study found that ozonation in combination with activated carbon was more efficient in removing triazine herbicides, although "tryns" could also be transformed during conventional treatment. Ecological risk assessment showed moderate risks posed by hydroxyterbuthylazine, prometryn, and simetryn; the Hanshui River had higher risks than the Yangtze River, and July had higher risks than February. Human exposure to the TZs via water ingestion was low compared to the reference doses. This study characterized the occurrence of some new emerging TZs in the source water, their fate during drinking water treatment, and their seasonal variability in the tap water.

A critical review over the removal of paracetamol (acetaminophen) from synthetic waters and real wastewaters by direct, hybrid catalytic, and sequential ozonation processes

Paracetamol (PCT) or acetaminophen is a widely prescribed drug to treat fever and mild to moderate pain. The PCT uptake by animals and humans is not complete, being excreted through their urine to contaminate the aquatic/natural environments. Trace amounts of this drug have been found in sewage sludge, hospital wastewaters, wastewater plant treatments, surface waters, and even drinking water. PCT denatures proteins and oxidize lipids in cells with damage of their genetic code. Its toxicity over macrophytes, protozoan, algae, bacteria, and fishes has been reported. Ozonation methods have been proposed as efficient treatments to solve this pollution. This comprehensive and critical review is focused on the application of ozonation processes to remove PCT polluted water from different sources, like natural waters, synthetic waters, and real wastewaters. The fundamentals, operating variables, and best results by direct ozonation and hybrid catalytic ozonation are described, with attention to produced reactive oxygen species and their oxidative action. Single ozonation, catalytic modification of materials, and hybrid non-catalytic processes are detailed as direct ozonation methods. Ozonation with metal-based catalysts and photolytic and photocatalytic ozonation as hybrid catalytic methods are analyzed. Sequential non-biological and biological treatments with ozone and ozonation for wastewater remediation in treatment plants are described. Reaction sequences proposed for PCT mineralization are finally discussed, showing the initial formation of hydroquinone and 2-hydroxy-4-(N-acetyl)-aminophenol and their consecutive evolution to ultimate carboxylic acids like oxalic and oxamic. The ability of the methods to destroy these acids and their iron- and/or copper-complexes explains their mineralization performance.

Role of ammonia-oxidizing microorganisms in the removal of organic micropollutants during simulated riverbank filtration

Biodegradation plays an important role in the removal of organic micropollutants (OMPs) during riverbank filtration (RBF) for drinking water production. The ability of ammonia-oxidizing microorganisms (AOM) to remove OMPs has attracted increasing attention. However, the distribution of AOM in RBF and its role in the degradation of OMPs remains unknown. In this study, the behavior of 128 selected OMPs and the distribution of AOM and their roles in the degradation of OMPs in RBF were explored by column and batch experiments simulating the first meter of the riverbank. The results showed that the selected OMPs were effectively removed (82/128 OMPs, >70% removal) primarily by biodegradation and partly by adsorption. Inefficiently removed OMPs tended to have low molecular weights, low log P, and contain secondary amides, secondary sulfonamides, secondary ketimines, and benzyls. In terms of the microbial communities, the relative abundance of AOM increased from 0.1%-0.2% (inlet_-sand) to 5.3%-5.9% (outlet_-sand), which was dominated by ammonia-oxidizing archaea whose relative abundance increased from 23%-72% (inlet_-sand) to 97% (outlet_-sand). Comammox accounted for 23%-64% in the inlet_-sand and 1% in the outlet_-sand. The abundances of AOM amoA genes kept stable in the inlet_-sand of control columns, while decreased by 78% in the treatment columns, suggesting the inhibition effect of allylthiourea (ATU) on AOM. It is observed that AOM played an important role in the degradation of OMPs, where its inhibition led to the corresponding inhibition of 32 OMPs (5/32 were completely suppressed). In particular, OMPs with low molecular weights and containing primary amides, secondary amides, benzyls, and secondary sulfonamides were more likely to be removed by AOM. This study reveals the vital role of AOM in the removal of OMPs, deepens our understanding of the degradation of OMPs in RBF, and offers valuable insights into the physiochemical properties of OMPs and their AOM co-metabolic potential.

Co-coagulation of micro-nano bubbles (MNBs) for enhanced drinking water treatment: A study on the efficiency and mechanism of a novel cleaning process

MNBs (Micro-nano bubbles) are widely used in cleaning processes for environmental treatments, but few studies have examined the interaction of MNBs with coagulation. In this study, a novel process, i.e., MNBs-coagulation, was developed for enhanced drinking water treatment. The humic acid (HA) removal efficiency was used to evaluate the effectiveness of MNBs-coagulation for drinking water treatment. The hydrolysis component ratio of polymeric aluminum chloride (PACl) with and without MNBs, the complexation strength of HA and PACl, and flocculent functional group characterization were used to analyze the mechanism of the MNBs-coagulation process to enhance drinking water treatment. The results of a Jar test showed that the MNBs-coagulation process could improve the removal efficiency of HA (up to a 27.9% increase in DOC removal). In continuous-flow experiments to remove HA, MNBs-coagulation can increase the removal efficiency of UV₂₅₄ by about 26.5% and with no significant change in turbidity. These results are attributed to the inherent hydroxyl radical generating properties of MNBs, the forced hydrolysis of PACl by MNBs to increase the Al_c percentage, and the ability of MNBs to increase the complexation strength of HA with PACl. At the same time, the MNBs-coagulation process has a strong anti-interference ability, almost no interference from anions and cations such as Cl^-, SO₄^2- and Ca²⁺, and has a good performance in natural surface water. In summary, MNBs-coagulation has strong potential for practical applications to enhance the efficiency of drinking water treatment.

Removal of organic micropollutans by adsorptive membrane

Various emerging organic micropollutants, such as pharmaceuticals, have attracted the interest of the water industry during the last two decades due to their insufficient removal during conventional water and wastewater treatment methods and increasing demand for pharmaceuticals projected to climate change-related impacts and COVID-19, nanosorbents such as carbon nanotubes (CNTs), graphene oxides (GOs), and metallic organic frameworks (MOFs) have recently been extensively explored regarding their potential environmental applications. Due to their unique physicochemical features, the use of these nanoadsorbents for organic micropollutans in water and wastewater treatment processes has been a rapidly growing topic of research in recent literature. Adsorptive membranes, which include these nanosorbents, combine the benefits of adsorption with membrane separation, allowing for high flow rates and faster adsorption/desorption rates, and have received a lot of publicity in recent years. The most recent advances in the fabrication of adsorptive membranes (including homogeneous membranes, mixed matrix membranes, and composite membranes), as well as their basic principles and applications in water and wastewater treatment, are discussed in this review. This paper covers ten years, from 2011 to 2021, and examines over 100 published studies, highlighting that micropollutans can pose a serious threat to surface water environments and that adsorptive membranes are promising, particularly in the adsorption of trace substances with fast kinetics. Membrane fouling, on the other hand, should be given more attention in future studies due to the high costs and restricted reusability.

In Situ Generation of Fouling Resistant Ag/Pd Modified PES Membranes for Treatment of Pharmaceutical Wastewater

In this study, Ag and Pd bimetallic nanoparticles were generated in situ in polyethersulfone (PES) dope solutions, and membranes were fabricated through a phase inversion method. The membranes were characterized for various physical and chemical properties using techniques such as FTIR, SEM, AFM, TEM, EDS, and contact angle measurements. The membranes were then evaluated for their efficiency in rejecting EOCs and resistance to protein fouling. TEM micrographs showed uniform distribution of Ag/Pd nanoparticles within the PES matrix, while SEM images showed uniform, fingerlike structures that were not affected by the presence of embedded nanoparticles. The presence of Ag/Pd nanoparticles resulted in rougher membranes. There was an increase in membrane hydrophilicity with increasing nanoparticles loading, which resulted in improved pure water permeability (37−135 Lm2h−1bar−1). The membranes exhibited poor salt rejection (<15%), making them less susceptible to flux decline due to concentration polarization. With a mean pore radius of 2.39−4.70 nm, the membranes effectively removed carbamazepine, caffeine, sulfamethoxazole, ibuprofen, and naproxen (up to 40%), with size exclusion being the major removal mechanism. Modifying the membranes with Ag/Pd nanoparticles improved their antifouling properties, making them a promising innovation for the treatment of pharmaceutical wastewater.

Are preserved coastal water bodies in Spanish Mediterranean basin impacted by human activity? Water quality evaluation using chemical and biological analyses

The Spanish Mediterranean basin is particularly susceptible to climate change and human activities, making it vulnerable to the influence of anthropogenic contaminants. Therefore, conducting comprehensive and exhaustive water quality assessment in relevant water bodies of this basin is pivotal. In this work, surface water samples from coastal lagoons or estuaries were collected across the Spanish Mediterranean coastline and subjected to target and suspect screening of 1,585 organic micropollutants by liquid chromatography coupled to ion mobility separation and high resolution mass spectrometry. In total, 91 organic micropollutants could be confirmed and 5 were tentatively identified, with pharmaceuticals and pesticides being the most prevalent groups of chemicals. Chemical analysis data was compared with data on bioanalysis of those samples (recurrent aryl hydrocarbon receptor (AhR) activation, and estrogenic receptor (ER) inhibition in wetland samples affected by wastewater streams). The number of identified organic contaminants containing aromatic rings could explain the AhR activation observed. For the ER antagonistic effects, predictions on estrogenic inhibition potency for the detected compounds were used to explain the activities observed. The integration of chemical analysis with bioanalytical observations allowed a comprehensive overview of the quality of the water bodies under study.

Direct and Activated Chlorine Dioxide Oxidation for Micropollutant Abatement: A Review on Kinetics, Reactive Sites, and Degradation Pathway

Recently, ClO2-based oxidation has attracted increasing attention to micropollutant abatement, due to high oxidation potential, low disinfection byproduct (DBPs) formation, and easy technical implementation. However, the kinetics, reactive sites, activation methods, and degradation pathways involved are not fully understood. Therefore, we reviewed current literature on ClO2-based oxidation in micropollutant abatement. In direct ClO2 oxidation, the reactions of micropollutants with ClO2 followed second-order reaction kinetics (kapp = 10−3–106 M−1 s−1 at neutral pH). The kapp depends significantly on the molecular structures of the micropollutant and solution pH. The reactive sites of micropollutants start with certain functional groups with the highest electron densities including piperazine, sulfonyl amido, amino, aniline, pyrazolone, phenol groups, urea group, etc. The one-electron transfer was the dominant micropollutant degradation pathway, followed by indirect oxidation by superoxide anion radical (O2•−) or hydroxyl radical (•OH). In UV-activated ClO2 oxidation, the reactions of micropollutants followed the pseudo-first-order reaction kinetics with the rates of 1.3 × 10−4–12.9 s−1 at pH 7.0. Their degradation pathways include direct ClO2 oxidation, direct UV photolysis, ozonation, •OH-involved reaction, and reactive chlorine species (RCS)-involved reaction. Finally, we identified the research gaps and provided recommendations for further research. Therefore, this review gives a critical evaluation of ClO2-based oxidation in micropollutant abatement, and provides recommendations for further research.

Pilot monitoring scheme of water pollutants in Important Bird and Biodiversity Areas

In this study we have established a monitoring scheme to determine the presence and distribution of widely used pharmaceuticals, pesticides, organophosphate esters (OPEs) and perfluoroalkyl substances (PFAS) in water bodies from Important Bird and Biodiversity Areas (IBAs) from Spain. The monitoring scheme included the georeferenced sampling of rocky mountain, Atlantic forest, riparian forest, Mediterranean forest, agricultural, inland aquatic and coastal aquatic IBAs, with the aim to evaluate the impact of widely used chemicals in those aquatic resources. Water samples were extracted using a generic solid-phase extraction protocol and analyzed by 3 analytical methods based on liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). Quality parameters such as compound recovery, intra and inter-day variation, linearity and limits of detection were calculated in order to validate the methods. In addition, the ionization conditions and the optimization of the most appropriate transitions permitted unequivocal identification. Once the sampling and analytical procedure was set-up, 59 target compounds were monitored in 63 samples. Pharmaceutical, followed by pesticides, OPEs and PFAS were widespread along all IBAs studied at concentrations from 0.5 to 41083 ng/L. Overall, this study highlights the need to monitor the presence of contaminants in areas of high ecological interest to contribute to pollution control and mitigation towards protection of biodiversity.

Rejection of trace organic compounds by membrane processes: mechanisms, challenges, and opportunities

This work critically reviews the application of various membrane separation processes (MSPs) in treating water polluted with trace organic compounds (TOrCs) paying attention to nanofiltration (NF), reverse osmosis (RO), membrane bioreactor (MBR), forward osmosis (FO), and membrane distillation (MD). Furthermore, the focus is on loopholes that exist when investigating mechanisms through which membranes reject/retain TOrCs, with the emphasis on the characteristics of the model TOrCs which would facilitate the identification of all the potential mechanisms of rejection. An explanation is also given as to why it is important to investigate rejection using real water samples, especially when aiming for industrial application of membranes with novel materials. MSPs such as NF and RO are prone to fouling which often leads to lower permeate flux and solute rejection, presumably due to cake-enhanced concentration polarisation (CECP) effects. This review demonstrates why CECP effects are not always the reason behind the observed decline in the rejection of TOrCs by fouled membranes. To mitigate for fouling, researchers have often modified the membrane surfaces by incorporating nanoparticles. This review also attempts to explain why nano-engineered membranes have not seen a breakthrough at industrial scale. Finally, insight is provided into the possibility of harnessing solar and wind energy to drive energy intensive MSPs. Focus is also paid into how low-grade energy could be stored and applied to recover diluted draw solutions in FO mode.

Respiratory Adsorption of Organic Pollutants in Wastewater by Superhydrophobic Phenolic Xerogels

Organogel adsorbents are widely used for the adsorption of hard-to-degrade organic pollutants in wastewater due to their natural affinity to the organic phase in water. In this study, phenolic xerogels (PF) synthesised in the ethylene glycol inorganic acid system are used as a backbone and superhydrophobic phenolic xerogels (ASO-PF) are obtained by grafting aminosilanes onto the PF backbone via the Mannich reaction. The modified ASO-PF not only retains the pore structure of the original PF (up to 90% porosity), but also has excellent superhydrophobic properties (water contact angle up to 153°). Owing to the unique pore structure, ASO-PF has excellent compression properties, cycling 50% compression deformation more than 10 times without being damaged, with a maximum compression deformation of up to 80%. A squeeze-suction-squeeze approach is proposed for selective adsorption of organic pollutants in homogeneous solutions based on the recyclable compression properties of ASO-PF. The ASO-PF is put under negative pressure by squeezing, and when the pressure is released, the adsorbed liquid enters the ASO-PF, where the organic pollutants are retained by the adsorption sites in the skeleton, and then the remaining water is discharged by squeezing. This breathing ASO-PF holds great promise for organic pollutant adsorption and recovery applications.

Oxidative stress and metal homeostasis alterations in Danio rerio (zebrafish) under single and combined carbamazepine, acetamiprid and cadmium exposures

Contaminants of emerging concern (CEC) are routinely detected in aquatic environments, especially pharmaceuticals, such as carbamazepine (CBZ), and neonicotinoid pesticides, like acetamiprid (ACT). CECs can interact with each other and with other legislated contaminants like Cd, resulting in unknown effects. Most studies evaluate only the effects of single contaminant exposures on aquatic biota. Therefore, the aim of the present study was to assess the effects of both single and combined CBZ, ACT and Cd exposures on zebrafish brain and liver oxidative stress parameters and metal homeostasis. The biomarkers catalase (CAT), glutathione-S-transferase (GST), total thiols (TOT), metallothionein (MT) and malondialdehyde (MDA) and the essential elements Ca, Cu, K, Na, Mg, Mn and Zn were evaluated after 96-hour static exposures. CBZ, ACT and Cd single (brain and liver) and combined (liver) treatments resulted in oxidative effects in both fish organs, also leading to metal (Ca, Mg, K, Mn, Zn and Cu) homeostasis alterations. ACT exposure resulted in the greatest adverse effects in the brain, while CBZ was the cause of major element homeostasis and oxidative stress alterations in the liver. Lower LPO levels were observed in the combined treatments compared to single treatments, suggesting interactions and contaminant effect attenuation. This study is the first to evaluate the initial effects of combined CBZ, ACT and Cd exposures in zebrafish, paving the way for further investigations concerning other biomarkers during longer exposure times.

Effective removal of levofloxacin drug and Cr(VI) from water by a composed nanobiosorbent of vanadium pentoxide@chitosan@MOFs

Wastewaters is generally polluted with various inorganic and organic contaminants which require effective multipurpose purification technology. In this respect, a novel V₂O₅@Ch/Cu-TMA nanobiosorbent was constructed via encapsulation of nanoscale metal organic frameworks (Cu-TMA) into vanadium pentoxide-imbedded-chitosan matrix to comprehensively investigate its efficiency in removal of levofloxacin drug (LEVO) (e.g., organic pollutant) and chromium (VI) (e.g., inorganic pollutant) from water. Both LEVO drug and Cr(VI) adsorptions were correlated to pseudo-second order (R² = 1) and Langmuir isotherm (R² = 0.9924 for LEVO and R² = 0.9815 for Cr(VI)). Adsorption of Cr(VI) was confirmed to be spontaneous and endothermic reactions, while LEVO was found to proceed via spontaneous and exothermic reactions based on the thermodynamic parameters. The emerged V₂O₅@Ch/Cu-TMA is regarded as an excellent nanobiosorbent for removal of inorganic contaminant as Cr(VI) from all natural water samples (tap, sea and wastewater) with percentages range 92.43%-96.95% and organic contaminant as LEVO drug from tap and wastewater (91.99%-97.20%).

Fate of Benzophenone, Benzophenone-3 and Caffeine in Lab-Scale Direct River Water Treatment by Hybrid Processes

Emerging microcontaminants benzophenone (BP), benzophenone-3 (BP-3) and caffeine (CF) are widely used anthropogenic markers from a group of pharmaceuticals and personal care products. They have different logD values and charges at neutral pH (2.96 neutral for BP; 3.65 negative and neutral for BP-3; 0.28 and neutral for CF). The goal of this study was to assess the efficacy of coagulation/flocculation/sedimentation (C/F/S), adsorption onto two types of powdered activated carbon (PAC)/sedimentation (PAC/S) and the combination of these two processes in different dosing sequences (PAC/C/F/S) and with/without ultrafiltration (powdered activated carbon/ultrafiltration-PAC/UF, coagulation/UF-CoA/UF) for the removal of selected micropollutants from river water. It was shown that the removal efficiency of benzophenones by coagulation depends on the season, while CF was moderately removed (40-70%). The removal of neutral BP by two PACs unexpectedly differed (near 40% and ˃93%), while the removal of BP-3 was excellent (>95%). PACs were not efficient for the removal of hydrophilic CF. Combined PAC/C/F/S yielded excellent removal for BP and BP-3 regardless of PAC type only when the PAC addition was followed by C/F/S, while C/F/S efficiency for CF diminished. The combination of UF with PAC or coagulant showed also high efficacy for benzophenones, but was negligible for CF removal.