Can polymer-degrading microorganisms solve the bottleneck of plastics' environmental challenges?

Biodegradation of polyurethanes by Staphylococcus warneri and by microbial co-culture

With the increasing production and use of polyurethanes (PUs), it is necessary to develop sustainable techniques for the remediation of plastic pollution. The use of microorganisms capable of biodegrading PUs may be an environmentally desirable solution for controlling these plastic contaminants. To contribute to the discovery of alternatives for the mitigation of plastics in the environment, this study aimed to explore the potential of StaphylococcuswarneriUFV_01.21, isolated from the gut of Galleria mellonellalarvae, for biodegradation of PU in pure culture and microbial co-culture with Serratia liquefaciensL135. S. warneri grew using Impranil® PU as the sole carbon source in pure culture and co-culture. With six days of incubation, the biodegradation of Impranil® in Luria Bertani broth was 96, 88 and 76%, while in minimal medium, it was 58, 54 and 42% for S. warneri, S. liquefaciens, and co-culture, respectively. In addition, S. warneri in pure culture or co-culture was able to biodegrade, adhere and form biofilms on the surfaces of Impranil® disks and poly[4,4'-methylenebis (phenyl isocyanate)-alt-1,4-butanediol/di(propylene glycol)/polycaprolactone] (PCLMDI) films. Scanning electron microscopy also revealed biodegradation by detecting the formation of cracks, furrows, pores, and roughness on the surfaces of inoculated PU, both with pure culture and microbial co-culture. This study is the first to demonstrate the potential of S. warneriin PU biodegradation.

Effect of conventional and biodegradable microplastics on earthworms during vermicomposting process

The potential effect of microplastics is an increasingly growing environmental issue. However, very little is known regarding the impact of microplastics on the vermicomposting process. The present study explored the effect of non-biodegradable (low density polyethylene; LDPE) and biodegradable (polybutylene succinate-co-adipate; PBSA) microplastics on earthworm Eisenia fetida during vermicomposting of cow dung. For this, earthworms were exposed to different concentrations (0, 0.5, 1 and 2%) of LDPE and PBSA of 2 mm size. The cow dung supported the growth and hatchlings of earthworms, and the toxicity effect of both LDPE and PBSA microplastics on Eisenia fetida was analyzed. Microplastics decreased the body weight of earthworms and there was no impact on hatchlings. The body weight of earthworm decreased from 0 to 60th day by 18.18% in 0.5% of LDPE treatment, 5.42% in 1% of LDPE, 20.58% in 2% of LDPE, 19.99% in 0.5% of PBSA, 15.09% in 1% of PBSA and 16.36% in 2% of PBSA. The physico-chemical parameters [pH (8.55-8.66), electrical conductivity (0.93-1.02 (S/m), organic matter (77.6-75.8%), total nitrogen (3.95-4.25 mg/kg) and total phosphorus (1.16-1.22 mg/kg)] do not show much significant changes with varying microplastics concentrations. Results of SEM and FTIR-ATR analysis observed the surface damage of earthworms, morphological and biochemical changes at higher concentrations of both LDPE and PBSA. The findings of the present study contribute to a better understanding of microplastics in vermicomposting system.

Mining strategies for isolating plastic-degrading microorganisms

Plastic waste is a growing global pollutant. Plastic degradation by microorganisms has captured attention as an earth-friendly tactic. Although the mechanisms of plastic degradation by bacteria, fungi, and algae have been explored over the past decade, a large knowledge gap still exists regarding the identification, sorting, and cultivation of efficient plastic degraders, primarily because of their uncultivability. Advances in sequencing techniques and bioinformatics have enabled the identification of microbial degraders and related enzymes and genes involved in plastic biodegradation. In this review, we provide an outline of the situation of plastic degradation and summarize the methods for effective microbial identification using multidisciplinary techniques such as multiomics, meta-analysis, and spectroscopy. This review introduces new strategies for controlling plastic pollution in an environmentally friendly manner. Using this information, highly efficient and colonizing plastic degraders can be mined via targeted sorting and cultivation. In addition, based on the recognized rules and plastic degraders, we can perform an in-depth analysis of the associated degradation mechanism, metabolic features, and interactions.

Effect of plastic mulch residue on plant growth performance and soil properties

Plastic mulch is widely utilized for weed control, temperature regulation, soil erosion prevention, disease management, and soil structure improvement, ultimately enhancing crop quality and yield. However, a significant issue with conventional plastic mulches is their low recycling rates, which can cause plastic residue to build up, thereby damaging soil quality and reducing crop yield. The emergence of biodegradable films offers a promising solution to mitigate this issue and reduce soil pollution. However, its potential effects on soil properties and plant performance remain unclear. In this study, low-density polyethylene (LDPE) and poly (butylene succinate-co-butylene adipate) (PBSA) were used to observe the effect of plastic mulch residues on soil properties and plant growth performance via potting experiment. Additionally, the interaction effects of compost and biochar as soil amendments with plastic mulch residues were also evaluated. The result of this study revealed that the type of plastic significantly affected the total nitrogen and magnesium uptake; however, the morphological traits of the tested plant (Japanese mustard spinach) were not significantly affected. The addition of compost and biochar led to a significant increase in both shoot and total dry weight of the plant, indicating a positive effect on its growth. The results of the two-way ANOVA indicated a significant influence of plastic type on dissolved phosphate (PO43-) levels and soil dehydrogenase activity (DHA). The interaction effect (plastic type with soil amendment) was statistically significant only for soil DHA. Neither plastic mulch residues nor soil amendments significantly affected other soil chemical properties. However, long-term experiments to systematically investigate the long-term effects of plastic residues are necessary.

Current advances, challenges and strategies for enhancing the biodegradation of plastic waste

Due to its highly recalcitrant nature, the growing accumulation of plastic waste is becoming an urgent global problem. Biodegradation is one of the best possible approaches for the treatment of plastic waste in an environmentally friendly manner, but our current knowledge on the underlying mechanisms, as well as strategies for the development and enhancement of plastic biodegradation are still limited. This review aims to provide an updated and comprehensive overview of current research on plastic waste biodegradation, focusing on enhancement strategies with ongoing research significance, including the mining of highly efficient plastic-degrading microorganisms/enzymes, utilization of synergistic additives, novel pretreatment approaches, modification via molecular engineering, and construction of bacterial/enzyme consortia systems. Studying these strategies can (i) enrich the high-performance microbial/enzymes toolbox for plastic degradation, (ii) provide methods for recycling and upgrading plastics, as well as (iii) enable further molecular modification and functional optimization of plastic-degrading enzymes to realize economically viable biodegradation of plastics. To the best of our knowledge, this is the first review to discuss in detail strategies to enhance biodegradation of plastics. Finally, some recommendations for future research on plastic biodegradation are listed, hoping to provide the best direction for tackling the plastic waste dilemma in the future.

Micro (nano) plastics uptake, toxicity and detoxification in plants: Challenges and prospects

Plastic pollution has emerged as a global challenge affecting ecosystem health and biodiversity conservation. Terrestrial environments exhibit significantly higher plastic concentrations compared to aquatic systems. Micro/nano plastics (MNPs) have the potential to disrupt soil biology, alter soil properties, and influence soil-borne pathogens and roundworms. However, limited research has explored the presence and impact of MNPs on aquaculture systems. MNPs have been found to inhibit plant and seedling growth and affect gene expression, leading to cytogenotoxicity through increased oxygen radical production. The article discusses the potential phytotoxicity process caused by large-scale microplastics, particularly those unable to penetrate cell pores. It also examines the available data, albeit limited, to assess the potential risks to human health through plant uptake.

Designing biodegradable alternatives to commodity polymers

The development and widespread adoption of commodity polymers changed societal landscapes on a global scale. Without the everyday materials used in packaging, textiles, construction and medicine, our lives would be unrecognisable. Through decades of use, however, the environmental impact of waste plastics has become grimly apparent, leading to sustained pressure from environmentalists, consumers and scientists to deliver replacement materials. The need to reduce the environmental impact of commodity polymers is beyond question, yet the reality of replacing these ubiquitous materials with sustainable alternatives is complex. In this tutorial review, we will explore the concepts of sustainable design and biodegradability, as applied to the design of synthetic polymers intended for use at scale. We will provide an overview of the potential biodegradation pathways available to polymers in different environments, and highlight the importance of considering these pathways when designing new materials. We will identify gaps in our collective understanding of the production, use and fate of biodegradable polymers: from identifying appropriate feedstock materials, to considering changes needed to production and recycling practices, and to improving our understanding of the environmental fate of the materials we produce. We will discuss the current standard methods for the determination of biodegradability, where lengthy experimental timescales often frustrate the development of new materials, and highlight the need to develop better tools and models to assess the degradation rate of polymers in different environments.

Removal of organic and inorganic contaminants from the air, soil, and water by algae

Rapid increases in human populations and development has led to a significant exploitation of natural resources around the world. On the other hand, humans have come to terms with the consequences of their past mistakes and started to address current and future resource utilization challenges. Today's primary challenge is figuring out and implementing eco-friendly, inexpensive, and innovative solutions for conservation issues such as environmental pollution, carbon neutrality, and manufacturing effluent/wastewater treatment, along with xenobiotic contamination of the natural ecosystem. One of the most promising approaches to reduce the environmental contamination load is the utilization of algae for bioremediation. Owing to their significant biosorption capacity to deactivate hazardous chemicals, macro-/microalgae are among the primary microorganisms that can be utilized for phytoremediation as a safe method for curtailing environmental pollution. In recent years, the use of algae to overcome environmental problems has advanced technologically, such as through synthetic biology and high-throughput phenomics, which is increasing the likelihood of attaining sustainability. As the research progresses, there is a promise for a greener future and the preservation of healthy ecosystems by using algae. They might act as a valuable tool in creating new products.

Microplastic stress in plants: effects on plant growth and their remediations

Microplastic (MP) pollution is becoming a global problem due to the resilience, long-term persistence, and robustness of MPs in different ecosystems. In terrestrial ecosystems, plants are exposed to MP stress, thereby affecting overall plant growth and development. This review article has critically analyzed the effects of MP stress in plants. We found that MP stress-induced reduction in plant physical growth is accompanied by two complementary effects: (i) blockage of pores in seed coat or roots to alter water and nutrient uptake, and (ii) induction of drought due to increased soil cracking effects of MPs. Nonetheless, the reduction in physiological growth under MP stress is accompanied by four complementary effects: (i) excessive production of ROS, (ii) alteration in leaf and root ionome, (iii) impaired hormonal regulation, and (iv) decline in chlorophyll and photosynthesis. Considering that, we suggested that targeting the redox regulatory mechanisms could be beneficial in improving tolerance to MPs in plants; however, antioxidant activities are highly dependent on plant species, plant tissue, MP type, and MP dose. MP stress also indirectly reduces plant growth by altering soil productivity. However, MP-induced negative effects vary due to the presence of different surface functional groups and particle sizes. In the end, we suggested the utilization of agronomic approaches, including the application of growth regulators, biochar, and replacing plastic mulch with crop residues, crop diversification, and biological degradation, to ameliorate the effects of MP stress in plants. The efficiency of these methods is also MP-type-specific and dose-dependent.

Specific response of soil properties to microplastics pollution: A review

The soil environment is a critical component of the global ecosystem and is essential for nutrient cycling and energy flow. Various physical, chemical, and biological processes occur in the soil and are affected by environmental factors. Soil is vulnerable to pollutants, especially emerging pollutants, such as microplastics (MPs). MPs pollution has become a significant environmental problem, and its harm to human health and the environment cannot be underestimated. However, most studies on MPs pollution have focused on marine ecosystems, estuaries, lakes, rivers, and other aquatic environments, whereas few considered the effects and hazards of MPs pollution of the soil, especially the responses of different environmental factors to MPs. In addition, when many MPs pollutants produced by agricultural activities (mulching film, organic fertilizer) and atmospheric sedimentation enter the soil environment, it will cause changes in soil pH, organic matter composition, microbial community, enzyme activity, animals and plants and other environmental factors. However, due to the complex and changeable soil environment, the heterogeneity is very strong. The changes of environmental factors may react on the migration, transformation and degradation of MPs, and there are synergistic or antagonistic interactions among different factors. Therefore, it is very important to analyze the specific effects of MPs pollution on soil properties to clarify the environmental behavior and effects of MPs. This review focuses on the source, formation, and influencing factors of MPs pollution in soil and summarizes its effect and influence degree on various soil environmental factors. The results provide research suggestions and theoretical support for preventing or controlling MPs soil pollution.

A review of the effects of environmental hazards on humans, their remediation for sustainable development, and risk assessment

In the race for economic development and prosperity, our earth is becoming more polluted with each passing day. Technological advances in agriculture and rapid industrialization have drastically polluted the two pillars of natural resources, land and water. Toxic chemicals and microbial contaminants/agents created by natural and anthropogenic activities are rapidly becoming environmental hazards (EH) with increased potential to affect the natural environment and human health. This review has attempted to describe the various agents (chemical, biological, and physical) responsible for environmental contamination, remediation methods, and risk assessment techniques (RA). The main focus is on finding ways to mitigate the harmful effects of EHs through the simultaneous application of remediation methods and RA for sustainable development. It is recommended to apply the combination of different remediation methods using RA techniques to promote recycling and reuse of different resources for sustainable development. The report advocates for the development of site-specific, farmer-driven, sequential, and plant-based remediation strategies along with policy support for effective decontamination. This review also focuses on the fact that the lack of knowledge about environmental health is directly related to public health risks and, therefore, focuses on promoting awareness of effective ways to reduce anthropological burden and pollution and on providing valuable data that can be used in environmental monitoring assessments and lead to sustainable development.

Production and Characterization of k-Carrageenan Films Incorporating Cymbopogon winterianus Essential Oil as New Food Packaging Materials

The global production of synthetic plastics from petroleum-based raw ingredients exceeds 150 million metric tons. The environment is threatened by tons of plastic waste, thus endangering wildlife and the public's health. These consequences increased the interest in biodegradable polymers as potential substitutes for traditional packaging materials. This study aimed to produce and characterize k-carrageenan films incorporating Cymbopogon winterianus essential oil, in which citronellal was determined to be the major compound (41.12%). This essential oil presented remarkable antioxidant activity, as measured through DPPH (IC₅₀ = 0.06 ± 0.01%, v/v; AAI = 85.60 ± 13.42) and β-carotene bleaching (IC₅₀ = 3.16 ± 0.48%, v/v) methods. The essential oil also showed antibacterial properties against Listeria monocytogenes LMG 16779 (diameter of inhibition zone = 31.67 ± 5.16 mm and MIC = 8 µL/mL), which were also observed when incorporated in the k-carrageenan films. Moreover, scanning electron microscopy showed the reduction of the biofilms of this bacterium, and even its inactivation, due to visible destruction and loss of integrity when the biofilms were created directly on the developed k-carrageenan films. This study also revealed the quorum sensing inhibition potential of Cymbopogon winterianus essential oil (diameter of violacein production inhibition = 10.93 ± 0.81 mm), where it could impede intercellular communication and, hence, lower violacein synthesis. The produced k-carrageenan films were transparent (>90%) and slightly hydrophobic (water contact angle > 90°). This work demonstrated the viability of using Cymbopogon winterianus essential oil to produce k-carrageenan bioactive films as new food packaging materials. Future work should focus on the scale-up production of these films.

Microplastics in terrestrial ecosystem: Sources and migration in soil environment

Plastics, especially microplastics in soils, are considered a severe environmental issue worldwide. However, globally, the main research focus is on microplastic pollution in the marine environment, the microplastic pollution on soils and sediments remains on the sideline so far. But the fact is that microplastics are omnipresent in terrestrial systems in the form of microbeads in industrial systems and in sewage sludge. Their presence in agricultural soils and sediments is enormously increased due to plastic mulching, plastic greenhouses and compost and extensive use of controlled release fertilizers. Therefore, this review outlines the global scenario regarding plastics and microplastics production, consumption, and possible pathways of penetration into the soil environment. Various mechanisms to restrict and manage the pathways of plastics and microplastics into the soil environment are also discussed. This review also focuses on the challenges and limitations on the use of plastic alternates such as bioplastics and oxo plastics. Also, the knowledge gaps on the source of microplastics in the environment and their deleterious effects on properties of soil, soil health and focused light on their soil trophic transfer in food chains via plants. This review provides a detailed insight on the management and possible control measures to alleviate the potential risk caused by microplastics pollution in the soil environment and the overall ecosystem's health. In spite of the occurrence and fate of microplastics on terrestrial environment, knowledge gaps and challenges for tackling this contamination are also explored which facilitates the policy makers to develop regulatory measures towards the containment of microplastics in living ecosystem.

Microplastics toxicity, detection, and removal from water/wastewater

The world has witnessed massive and preeminent microplastics (MPs) pollution in water bodies due to the inevitable continuous production of plastics for various advantageous chemical and mechanical features. Plastic pollution, particularly contamination by MPs (plastic particles having a diameter lesser than 5 mm), has been a rising environmental concern in recent years due to the inappropriate disposal of plastic trash. This study presents the recent advancements in different technologies for MPs removal in order to gain proper insight into their strengths and weaknesses, thereby orchestrating the preparation for innovation in the field. The production, origin, and global complexity of MPs were discussed. This study also reveals MPs' mode of transportation, its feedstock polymers, toxicities, detection techniques, and the conventional removal strategies of MPs from contaminated systems. Modification of conventional methods vis-à-vis new materials/techniques and other emerging technologies, such as magnetic extraction and sol-gel technique with detailed mechanistic information for the removal of MPs are presented in this study. Conclusively, some future research outlooks for advancing the MPs removal technologies/materials for practical realization are highlighted.

Morpho-biochemical Responses and Disturbed Redox Homeostasis in Barley Under Benzyl-butyl Phthalate Stress

The present study is aimed to address the morphometric consequences, yield attributes, and biochemical responses of barley plants under the stress of an endocrine disruptor i.e., benzyl-butyl phthalate (BBP). The morphometric analyses (plant length, dry weight, and net primary productivity) revealed that the inhibition induced by BBP was concentration- and time-dependent. The seed weight and the number of seeds per spike have also significantly declined with an increase in BBP doses. Similarly, BBP exhibited significant alterations over the control in the biochemical indices viz., pigments, sugars, proteins, proline, malonaldehyde, and hydrogen peroxide contents of barley plants. Furthermore, BBP stress negatively influenced the activities of antioxidative enzymes viz., SOD, POD, CAT, APX, and GR of barley with an increase in doses and exposure durations due to the over-produced reactive oxygen species. The uptake and transport of BBP were determined and observed as a responsible cue for these toxicological implications in barley plants under BBP exposure. The correlation of barley plants' morpho-biochemical responses with BBP uptake and transport was also established using Pearson's correlation. Thus, this study indicated the toxicological behavior of meagerly explored phthalate (i.e., BBP) in the crop plant and these observations can be utilized for the generation of tolerant cultivars.

Single and composite damage mechanisms of soil polyethylene/polyvinyl chloride microplastics to the photosynthetic performance of soybean (Glycine max [L.] merr.)

Introduction

Adverse impacts of soil microplastics (MPs, diameter<5 mm) on vegetative growth and crop production have been widely reported, however, the single and composite damage mechanisms of polyethylene (PE) /polyvinyl chloride (PVC) microplastics (MPs) induced photosynthesis inhibition are still rarely known.

Methods

In this study, two widely distributed MPs, PE and PVC, were added to soils at a dose of 7% (dry soil) to examine the single and composite effects of PE-MPs and PVC-MPs on the photosynthetic performance of soybean.

Results

Results showed PE-MPs, PVC-MPs and the combination of these two contaminants increased malondialdehyde (MDA) content by 21.8-97.9%, while decreased net photosynthesis rate (Pn) by 11.5-22.4% compared to those in non-stressed plants, PVC MPs caused the most severe oxidative stress, while MPs stress resulted in Pn reduction caused by non-stomatal restriction. The reason for this is the single and composite MPs stress resulted in a 6% to 23% reduction in soybean PSII activity RCs reaction centers, along with negative effects on soybean PSII energy uptake, capture, transport, and dissipation. The presence of K-band and L-band also represents an imbalance in the number of electrons on the donor and acceptor side of PSII and a decrease in PSII energy transfer. Similarly, PVC single stress caused greater effects on soybean chloroplast PSII than PE single stress and combined stresses.

Discussion

PE and PVC microplastic stress led to oxidative stress in soybean, which affected the structure and function of photosynthetic PSII in soybean, ultimately leading to a decrease in net photosynthetic rate in soybean.

A versatile tag for simple preparation of cutinase towards enhanced biodegradation of polyethylene terephthalate

Enzymatic degradation of polyethylene terephthalate (PET) suffered from challenges such as complex and costly enzyme preparation, difficult access to PET substrates, poor reusability of free enzymes and sometimes MHET inhibitions. Herein, we propose an "all-in-one" strategy to address these issues with a well-designed elastin-like polypeptides (ELPs) tag. The preparation of the ELPs-tagged cutinase (ET-C) was efficient and easy to scale up by centrifugation, with an activity recovery of 57.55 % and a yield of 160 mg/L. Besides, the activity of the ET-C was 1.3 and 1.66-fold higher in degrading PET micro- and macro-plastics compared to wild-type cutinase. The self-immobilized cutinase (ET-C@SiO₂) obtained by the ELPs-mediated biosilicification exhibited high loading capacity, activity, and thermostability and maintained 77.65 % of the original activity after 10 reuses. Interestingly, the product of the ET-C was TPA, whereas the wild-type was TPA and MHET. This is a simple way to release the intermediates inhibition compared with the existing methods. Our results demonstrated the feasibility of the versatile ELPs tag, which will pave an alternative economic way for scalable PET biodegradation.

Adsorption behavior of aged polybutylece terephthalate microplastics coexisting with Cd(II)-tetracycline

Microplastics (MPs) are one of the emerging classes of pollutants that can be infiltrated into any aqueous solutions from disposed toxic metals and antibiotics, further exacerbating the potential biotoxicity of MPs. However, the research on the interaction between MPs and various pollutants is limited. Therefore, in this study, the changes in toxicity of polybutylece terephthalate (PBT) MPs were assessed following adsorption of heavy metals and antibiotics. The adsorption behavior of Cd(II) and tetracycline (TC) on ultraviolet (UV) light-aged PBT was investigated. The results demonstrated that the Cd(II) adsorption behavior could be described by the pseudo-second-order kinetic and Langmuir isothermal models, while the TC adsorption behavior has well fitted using Elovich and Sips models. The whole adsorption process occurred via either external diffusion or internal diffusion. The interactions between aged PBT and pollutants were evaluated under different environmental conditions, such as solution pH and the concentrations of dissolved organic matter and cations. The amounts of Cd(II) and TC adsorbed were higher in the competitive systems than the single solution, which might attribute to the formation of Cd(II)-TC complexes and aged PBT functional group changes. The results of two-dimensional correlation spectroscopy (2D-COS) describes the sequence of functional group transformation during the uptake of Cd(II)-TC by aged PBT in binary systems. These findings identify a strong interaction between aged PBT and contaminants, establishing the potential fate of aged MPs under natural aquatic environment conditions.