Concurrent fabrication of ZnO-ZnFe2O4 hybrid nanocomposite for enhancing photocatalytic degradation of organic pollutants and its bacterial inactivation

Ultrasensitive detection and photocatalytic degradation of polyketide drug tetracycline in environment and food samples using dual-functional Ag doped zinc ferrite embedded functionalized carbon nanofibers

The efficient degradation and accurate quantification of tetracycline in environment and food samples is pivotal for ensuring public health and safety by monitoring potential contamination and maintaining regulatory standards. Hence, in this study, photocatalytic degradation of tetracycline and its electrochemical detection in environment and food samples based on dual-functional silver-doped zinc ferrite nanoparticles embedded chitosan-functionalized carbon nanofibers fabricated on a screen-printed carbon electrode (AgZFO/CHIT-CNF/SPCE) is presented. A hydrothermal method was used in the synthesis of Ag-doped ZFO, and chitosan was functionalized on the CNF surface using a swift and cost-effective chemical modification process of carboxyl groups. Various techniques, such as XRD, HRTEM, elemental mapping, EIS, XPS, FTIR, VSM, BET, UV-Vis DRS, and Raman spectroscopy were used to analyze the characteristics of the prepared nanocomposite. Cyclic voltammetry and differential pulse voltammetry were used to evaluate the surface-controlled electrocatalytic properties of AgZFO/CHIT-CNF towards tetracycline. Electrochemical tests revealed that the proposed electrode exhibited excellent sensitivity for detecting tetracycline. The fabricated electrode had a low detection limit of 1 nM and a wide linear range (0.2-53.2 μM). The sensor also demonstrated exceptional selectivity, stability, and reusability. The practical feasibility evaluated with real samples, including chicken feed, shrimp, milk, soil, and wastewater, resulted in high recovery values.

In vitro analysis of novel trimetallic (Ag-Cu-Ni TNC) to handle benzene and benzopyrene pollutants in an aqueous environment

In this study, a trimetallic nanocomposite comprising Silver Copper-Nickel (Ag-Cu-Ni TNC) was synthesized and analysed for its efficiency in degrading benzene and benzopyrene, which has five fused benzene rings. Fabrication of trimetallic nanocomposites were characterized using UV spectroscopy, FTIR studies, SEM EDAX, and DLS results. XRD confirmed the cubic crystalline Fcc structure of Ag-Cu-Ni TNC. Photocatalytic degradation analysis revealed that Ag-Cu-Ni TNC has the efficient photocatalytic ability, and the optimum condition required for efficient degradation of benzene and benzopyrene was identified as 2 μg/mL of PAH molecule, 10 μg/mL of Ag-Cu-Ni TNC at pH 5, stirring time of 2 h placed under UV light. Based on these optimum conditions, kinetic and isotherm studies were performed, revealing that the adsorption of benzene and benzopyrene by Ag-Cu-Ni TNC fits well with the Pseudo-second order kinetic model and Freundlich isotherm model. Thus, our study's adsorption of PAH molecule from aqueous solution takes place through chemisorption and involves heterogeneous adsorption phenomena.

The degradation of bisphenol-A organic pollutant using the dispersal of TiO2 nanorods onto the partial reduction of graphene oxide nanosheets

The notion of innovative combinations of semiconducting metal oxides for photocatalytic destruction is a key factor in the removal of environmental contaminants. However, for the first time, the combination was made possible for the aforementioned reason by embedding one-dimensional titanium dioxide (TiO2) semiconductor nanorods on two-dimensional rGO (reduced graphene oxide) nanosheets utilizing hydrothermal and a modified Hummers' method. By applying several sophisticated procedures, the properties of these catalysts were found, and then the degradation of BPA (bisphenol-A) was examined with UV and visible light sources. Further, all the analyses were performed on pure TiO2 material. As a result of the synergistic interaction between TiO2 and rGO, the rGO-TiO2 catalyst produced a favorable photocatalytic outcome. The structural investigation of rGO-TiO2 has confirmed that the TiO2 was in anatase phase along with GO and rGO peaks, and the morphological characterization showed that the TiO2 nanorods were integrated randomly into the rGO nanosheets along with defective sites. Also, adding rGO to TiO2 causes charge separation, and π-π interactions to improve the visible light absorption range. In this study, the main model organic component in the photocatalytic degradation is bisphenol-A (BPA). During visible light irradiation, the OH radicals were finally produced by the redox reactions. Furthermore, the rGO surface adsorbs the phenol molecules due to graphene π-π interactions, thus narrowing the band gap and increasing the efficiency of BPA degradation.

New PMMA-Based Hydroxyapatite/ZnFe2O4/ZnO Composite with Antibacterial Performance and Low Toxicity

Polymethylmethacrylate (PMMA) is the most commonly used bone void filler in orthopedic surgery. However, the biocompatibility and radiopacity of PMMA are insufficient for such applications. In addition to insufficient biocompatibility, the microbial infection of medical implants is one of the frequent causes of failure in bone reconstruction. In the present work, the preparation of a novel PMMA-based hydroxyapatite/ZnFe2O4/ZnO composite with heterophase ZnFe2O4/ZnO NPs as an antimicrobial agent was described. ZnFe2O4/ZnO nanoparticles were produced using the electrical explosion of zinc and iron twisted wires in an oxygen-containing atmosphere. This simple, highly productive, and inexpensive nanoparticle fabrication approach could be readily adapted to different applications. From the findings, the presented composite material showed significant antibacterial activity (more than 99% reduction) against P. aeruginosa, S. aureus, and MRSA, and 100% antifungal activity against C. albicans, as a result of the combined use of both ZnO and ZnFe2O4. The composite showed excellent biocompatibility against the sensitive fibroblast cell line 3T3. The more-than-70% cell viability was observed after 1-3 days incubation of the sample. The developed composite material could be a potential material for the fabrication of 3D-printed implants.

A novel tungsten diselenide nanoparticles for enhanced photocatalytic performance of Cr (VI) reduction and ciprofloxacin (CIP)

Nanoparticles (NPs) fabrication is a significant approach to enhance the visible light response of photocatalysts, to realize inexpensive and more harmful compound removal, at larger scale. The poor electrons and holes separation capability and low light activity of bulk materials can be notably enhanced through developing NPs. From photocatalytic investigation, better performance was received in the tungsten diselenide (WSe2) NPs than that in bare WSe2, exhibiting the action of restrained recombination of charge carriers in the NPs. The photocatalytic Cr(VI) reduction efficiency of WSe2 NPs is 2.7 folds greater than that by bare WSe2. On the other hand, the photocatalytic efficiency follows the order of nano WSe2-3 > nano WSe2-2 > nano WSe2-1 > bare WSe2, nano WSe2-3 is nearly 2.7 folds greater than that of bare WSe2. The results imply the fabrication of WSe2 NPs and it possesses improved visible light utilization. The proposed WSe2 NPs have merged with the three aspects of photocatalytic capability including the visible light activity, the valid separation of photo-response charge carriers and enough surface active sites owing to the nanoscale formed. This research endows conduct on the potential style of NPs for photo-response water environmental remediation.

Water remediation using titanium and zinc oxide nanomaterials through disinfection and photo catalysis process: A review

Various pesticides and organic compounds generated as a result of rapid industrialization and pharmaceutical companies pose a major threat to the environment. Novel photocatalysts based on zinc oxide and titanium oxide exhibit great potential towards absorption of these organic pollutants from wastewater. The photocatalysts possess various extraordinary properties like photocatalytic degradation potential, non-toxic and high stability. However, several limitations are also associated with the applications of these photocatalysts like poor affinity, particle agglomeration, high band gap and recovery issues. Hence, optimization is required to enhance their efficiency and at the same time make them cost effective and sustainable. The review covers the mechanism for water treatment, limitations and development of different modification strategies that improve the removal efficiency of titanium and zinc oxide based photocatalysts. Thus, further research in the field of photocatalysts can be encouraged for carrying out water remediation.