Photochemical Perfluoroalkylation with Pyridine N-Oxides: Mechanistic Insights and Performance on a Kilogram Scale

Ruthenium-Catalyzed Meta-Selective Trifluoroisopropylation of Arenes

This work reports the mild and efficient Ru-catalyzed trifluoroisopropylation of arenes using 2-bromo-1,1,1-trifluoropropane. Various bioactive molecules, such as purine and nucleoside derivatives, were well-suited for this transformation, affording the corresponding products in moderate-to-good yields. This method provides an efficient strategy for synthesizing trifluoroisopropyl molecules for drug discovery.

Review and Theoretical Analysis of Fluorinated Radicals in Direct CAr-H Functionalization of (Hetero)arenes

We highlight key contributions in the field of direct radical CAr- H (hetero)aromatic functionalization involving fluorinated radicals. A compilation of Functional Group Transfer Reagents and their diverse activation mechanisms leading to the release of radicals are discussed. The substrate scope for each radical is analyzed and classified into three categories according to the electronic properties of the substrates. Density functional theory computational analysis provides insights into the chemical reactivity of several fluorinated radicals through their electrophilicity and nucleophilicity parameters. Theoretical analysis of their reduction potentials also highlights the remarkable correlation between electrophilicity and oxidizing ability. It is also established that highly fluorinated radicals (e.g. ⋅OCF3) are capable of engaging in single-electron transfer (SET) processes rather than radical addition, which is in good agreement with experimental literature data. A reactivity scale, based on activation barrier of addition of these radicals to benzene is also elaborated using the high accuracy DLPNO-(U)CCSD(T) method.

Trifluoroethylation and Pentafluoropropylation of C(sp3)-H Bonds

Polyfluorinated substituents often enhance effectiveness, improve the stability within metabolic processes, and boost the lipophilicity of biologically active compounds. However, methods for their introduction into aliphatic carbon chains remain very limited. A potentially general route to integrate the fluorinated scaffolds into organic molecules involves insertion of fluorine-containing carbenes into C(sp3)-H bonds. The electron-withdrawing characteristics of perfluoroalkyl groups enhances the reactivity of these carbenes which should enable the functionalization of unactivated C(sp3)-H bonds. Curiously, it appears that use of perfluoroalkyl-containing carbenes in alkane C-H functionalization is exceedingly rare. This concept describes photolysis, enzymatic catalysis, and transition metal catalysis as three primary approaches to C(sp3)-H functionalization by trifluoromethylcarbene and its homologues.

Ruthenium(II) complexes with phosphonate-substituted phenanthroline ligands as reusable photoredox catalysts

Ru(II) complexes with polypyridyl ligands (2,2'-bipyridine = bpy, 1,10-phenanthroline = phen) play a central role in the development of photocatalytic organic reactions. In this work, we synthesized four mixed-ligand [Ru(phen)(bpy)2]2+-type complexes (Ru-Pcat-A) bearing two phosphonate substituents P(O)(OH)(OR) (R = H, Et) attached to the phen core at positions 3,8 (Ru-3,8PH and Ru-3,8PHEt) and 4,7 (Ru-4,7PH and Ru-4,7PHEt) of the heterocycle in high yields (87-99%) and characterized them using spectral methods. Single crystal X-ray diffraction was employed to determine the coordination mode of the ditopic phen ligand in Ru-4,7PH. This complex exists as the neutral species and forms a 1D hydrogen-bonded framework in the crystals. The light absorption characteristics were found to be similar for all complexes prepared in this work. However, the emission maxima in aqueous solutions were significantly affected by the substitution of the heterocycle, ranging from 629 nm for Ru-4,7PH to 661 nm for Ru-3,8PHEt. The emission quantum yields in Ar-saturated deionized water showed a strong dependence on the substitution pattern of the phen ligand, with maximal values reaching approximately 0.11 for Ru-4,7PHEt and Ru-4,7PH, which is twice as high as that of the classical [Ru(bpy)3]2+ complex (Ru-bpy). The photocatalytic performance of Ru-Pcat-A was investigated using visible light photoredox catalytic transformations of tertiary amines. With Ru-Pcat-A, we achieved the phosphonylation of N-aryl-1,2,3,4-tetrahydroisoquinolines (THIQs) and cyanation of THIQs and N,N-dimethylaniline in methanol, while a mixture of nitromethane/methanol (1 : 1 v/v) proved to be the optimal solvent for conducting the nitromethylation of THIQs. In the majority of the studied reactions, Ru-4,7PHEt exhibited greater efficiency compared to Ru-bpy, and it could be easily separated from the products using water extraction and reused in the next catalytic cycle. We successfully performed seven consecutive nitromethylation and phosphonylation of N-phenyl-1,2,3,4-tetrahydroisoquinoline using the recycled homogeneous photoredox catalyst.

Photochemical Difluoromethylation of Quinoxalin-2(1H)-ones with Difluoroacetic Anhydride and Pyridine N-Oxide

A novel photochemical difluoromethylation of quinoxalin-2(1H)-ones under catalyst-free conditions was achieved with difluoroacetic anhydride and pyridine N-oxide. The green and mild reaction conditions as well as readily attainable difluoroacetic anhydride provide a useful protocol to prepare C3-difluoromethylated quinoxalin-2(1H)-ones.

Current State of Microflow Trifluoromethylation Reactions

The trifluoromethyl group is a powerful structural motif in drugs and polymers; thus, developing trifluoromethylation reactions is an important area of research in organic chemistry. Over the past few decades, significant progress has been made in developing new methods for the trifluoromethylation of organic molecules, ranging from nucleophilic and electrophilic approaches to transition-metal catalysis, photocatalysis, and electrolytic reactions. While these reactions were initially developed in batch systems, more recent microflow versions are highly attractive for industrial applications owing to their scalability, safety, and time efficiency. In this review, we discuss the current state of microflow trifluoromethylation. Approaches for microflow trifluoromethylation based on different trifluoromethylation reagents are described, including continuous flow, flow photochemical, microfluidic electrochemical reactions, and large-scale microflow reactions.

Understanding and Controlling Fluorinated Diacyl Peroxides and Fluoroalkyl Radicals in Alkene Fluoroalkylations

The demand for practical methods for the synthesis of novel fluoroalkyl molecules is increasing owing to their diverse applications. Our group has achieved efficient difunctionalizing fluoroalkylations of alkenes using fluorinated carboxylic anhydrides as user-friendly fluoroalkyl sources. Fluorinated diacyl peroxide, prepared in situ from carboxylic anhydrides, enables the development of novel reactions when used as a radical fluoroalkylating reagent. In this account, we aim to provide an in-depth understanding of the structure, bonding, and reactivity of fluorinated diacyl peroxides and radicals as well as their control in fluoroalkylation reactions. In the first part of this account, the physical properties and reactivity of diacyl peroxides and fluoroalkyl radicals are described. In the subsequent part, we categorize the reactions into copper-catalyzed and metal-free methods utilizing the oxidizing properties of fluorinated diacyl peroxides. We also outline examples and mechanisms.

Regioselective C-H Trifluoromethylation and Its Related Reactions of (Hetero)aromatic Compounds

Fluorinated functional groups, including trifluoromethyl group, play important roles in the development of drugs, agrochemicals, and organic functional materials. Therefore, the development of highly effective and practical reactions to introduce fluorinated functional groups into (hetero)aromatic compounds is highly desirable. We have achieved several regioselective C-H trifluoromethylation and related reactions by electrophilic and nucleophilic activation of six-membered heteroaromatic compounds and steric protection of aromatic compounds. These reactions proceed in good to excellent yields, even on a gram scale, with high functional group tolerance, and are applicable to the regioselective trifluoromethylation of drug molecules. In this personal account, the background of the introduction reactions of fluorinated functional groups, our reaction designs to achieve regioselective C-H trifluoromethylation and the related reactions of (hetero)aromatic compounds are explained.

Pentafluorocyclopropanation of (Hetero)arenes Using Sulfonium Salts: Applications in Late-Stage Functionalization

The evaluation of the pentafluorocyclopropyl group as a chemotype in crop protection and medicinal chemistry has been hampered in the past by the lack of suitable methodologies that enable the practical incorporation of this moiety into advanced synthetic intermediates. Herein, we report the gram-scale synthesis of an unprecedented sulfonium salt, 5-(pentafluorocyclopropyl)dibenzothiophenium triflate, and its use as a versatile reagent for the photoinduced C-H pentafluorocyclopropylation of a broad series of non-previously functionalized (hetero)arenes through a radical mediated mechanism. The scope and potential benefits of the protocol developed are further demonstrated by the late-stage introduction of the pentafluorocyclopropyl unit into biologically relevant molecules and widely used pharmaceuticals.

Pyridine N-Oxide-Promoted Cobalt-Catalyzed Dioxygen-Mediated Methane Oxidation

The partial oxidation of methane with O₂ is significant due to its potential of providing abundant chemical feedstock. Only a few examples realized this type of reaction in homogeneous solvent systems, most of which are in low efficiency. Herein, we present a pyridine N-oxide-promoted cobalt-catalyzed O₂-mediated methane oxidation to produce methylene bis(trifluoroacetate) with productivity over 500 mol_ester mol_metal^-1 h^-1.

Scale-Up of Photochemical Reactions: Transitioning from Lab Scale to Industrial Production

In the past two decades, we have witnessed a rapid emergence of new and powerful photochemical and photocatalytic synthetic methods. Although these methods have been used mostly on a small scale, there is a growing need for efficient scale-up of photochemistry in the chemical industry. This review summarizes and contextualizes the advancements made in the past decade regarding the scale-up of photo-mediated synthetic transformations. Simple scale-up concepts and important fundamental photochemical laws have been provided along with a discussion concerning suitable reactor designs that should facilitate scale-up of this challenging class of organic reactions.

Photocatalytic Late-Stage C-H Functionalization

The emergence of modern photocatalysis, characterized by mildness and selectivity, has significantly spurred innovative late-stage C-H functionalization approaches that make use of low energy photons as a controllable energy source. Compared to traditional late-stage functionalization strategies, photocatalysis paves the way toward complementary and/or previously unattainable regio- and chemoselectivities. Merging the compelling benefits of photocatalysis with the late-stage functionalization workflow offers a potentially unmatched arsenal to tackle drug development campaigns and beyond. This Review highlights the photocatalytic late-stage C-H functionalization strategies of small-molecule drugs, agrochemicals, and natural products, classified according to the targeted C-H bond and the newly formed one. Emphasis is devoted to identifying, describing, and comparing the main mechanistic scenarios. The Review draws a critical comparison between established ionic chemistry and photocatalyzed radical-based manifolds. The Review aims to establish the current state-of-the-art and illustrate the key unsolved challenges to be addressed in the future. The authors aim to introduce the general readership to the main approaches toward photocatalytic late-stage C-H functionalization, and specialist practitioners to the critical evaluation of the current methodologies, potential for improvement, and future uncharted directions.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Membrane-based TBADT recovery as a strategy to increase the sustainability of continuous-flow photocatalytic HAT transformations

Photocatalytic hydrogen atom transfer (HAT) processes have been the object of numerous studies showcasing the potential of the homogeneous photocatalyst tetrabutylammonium decatungstate (TBADT) for the functionalization of C(sp³)-H bonds. However, to translate these studies into large-scale industrial processes, careful considerations of catalyst loading, cost, and removal are required. This work presents organic solvent nanofiltration (OSN) as an answer to reduce TBADT consumption, increase its turnover number and lower its concentration in the product solution, thus enabling large-scale photocatalytic HAT-based transformations. The operating parameters for a suitable membrane for TBADT recovery in acetonitrile were optimized. Continuous photocatalytic C(sp³)-H alkylation and amination reactions were carried out with in-line TBADT recovery via two OSN steps. Promisingly, the observed product yields for the reactions with in-line catalyst recycling are comparable to those of reactions performed with pristine TBADT, therefore highlighting that not only catalyst recovery (>99%, TON > 8400) is a possibility, but also that it does not happen at the expense of reaction performance.

Photoredox Activation of Anhydrides for the Solvent-Controlled Switchable Synthesis of gem-Difluoro Compounds

The incorporation of the gem-difluoromethylene (CF₂ ) group into organic frameworks is highly sought due to the influence of this unit on the physicochemical and pharmacological properties of molecules. Herein we report an operationally simple, mild, and switchable protocol to access various gem-difluoro compounds that employs chlorodifloroacetic anhydride (CDFAA) as a low-cost and versatile fluoroalkylating reagent. Detailed mechanistic studies revealed that electron-transfer photocatalysis triggers mesolytic cleavage of a C-Cl bond generating a gem-difluoroalkyl radical. In the presence of alkene, this radical species acts as a unique intermediate that, under solvent-controlled reaction conditions, delivers a wide range of gem-difluorinated γ-lactams, γ-lactones, and promotes oxy-perfluoroalkylation. These protocols are flow- and batch-scalable, possess excellent chemo- and regioselectivity, and can be used for the late-stage diversification of complex molecules.

Visible-Light-Induced Photocatalyst-Free Radical Trifluoromethylation

An attractive, versatile, and operationally simple, visible-light-induced, transition-metal-free, photocatalyst-free, and oxidant-free trifluoromethylation has been demonstrated. Triflic anhydride (Tf₂O), being inexpensive and readily available, was chosen as the radical trifluoromethyl source. Thianthrene was used as a recyclable Tf₂O-activating reagent, and a high-yielding and scalable trifluoromethylation reaction was achieved. Density functional theory and mechanistic studies showed that a free radical homolytic process excited by visible light is involved in this reaction, generating a key trifluoromethyl radical intermediate.

Recent Advances in Employing Catalytic Donors and Acceptors in Electron Donor-Acceptor Complex Photochemistry

Electron donor-acceptor (EDA) complexes provide a means to initiate radical reactions under visible light irradiation using substrates that do not absorb visible light individually. Catalytic approaches to complex formation are vital for advancing this synthetic strategy as it decouples the complexation and photogeneration of radicals from substrate functionalization, a limitation inherent to stoichiometric approaches that restricts structural diversity. This Synopsis highlights recent developments in EDA complex photochemistry in which either the donor or acceptor are employed catalytically.

Upcycling to Sustainably Reuse Plastics

Plastics are now indispensable in daily lives. However, the pollution from plastics is also increasingly becoming a serious environmental issue. Recent years have seen more sustainable approaches and technologies, commonly known as upcycling, to transform plastics into value-added materials and chemical feedstocks. In this review, the latest research on upcycling is presented, with a greater focus on the use of renewable energy as well as the more selective methods to repurpose synthetic polymers. First, thermal upcycling approaches are briefly introduced, including the redeployment of plastics for construction uses, 3D printing precursors, and lightweight materials. Then, some of the latest novel strategies to deconstruct condensation polymers to monomers for repolymerization or introduce vulnerable linkers to make the plastics more degradable are discussed. Subsequently, the review will explore the breakthroughs in plastics upcycling by heterogeneous and homogeneous photocatalysis, as well as electrocatalysis, which transform plastics into more versatile fine chemicals and materials while simultaneously mitigating global climate change. In addition, some of the biotechnological advances in the discovery and engineering of microbes that can decompose plastics are also presented. Finally, the current challenges and outlook for future plastics upcycling are discussed to stimulate global cooperation in this field.

TFA-Promoted Intermolecular Friedel-Crafts Alkylation of Arenes with 2,2,2-Trifluoroethylaryl Sulfoxides

The classical Pummerer rearrangement of 2,2,2-trifluoroethylaryl sulfoxide with trifluoracetic anhydride (TFAA) affords the S , O -acetal efficiently. In the presence of trifluoracetic acid (TFA) as the co-solvent, the S , O -acetal can regenerate reactive thionium intermediate of Pummerer rearrangement. When employing arenes as nucleophiles, this strategy produces corresponding 1-thiyl-2,2,2-trifluoroethyl arenes with excellent yields under metal-free conditions.

Fluorine-Containing Prolines: Synthetic Strategies, Applications, and Opportunities

Fluorinated prolines play an important role in peptide studies, protein engineering, medicinal chemistry, drug discovery, and agrochemistry. Since the first synthesis of 4-fluoroprolines by Gottlieb and Witkop in 1965, their popularity started to grow exponentially. For example, during the past two decades, all isomeric trifluoromethyl-substituted prolines have been synthesized. In this Perspective, chemical properties and applications of fluorinated prolines are discussed. Synthetic approaches to all known fluorine-containing prolines are also discussed and analyzed. This analysis unexpectedly revealed an unsolved problem: in strict contrast to fluoro- and trifluoromethyl-substituted prolines, the corresponding analogues with fluoromethyl and difluoromethyl groups are mostly unknown. At the end of the paper, structures of several interesting, yet unknown, fluorinated prolines are disclosed─a good opportunity for chemists to make them.

Technological Innovations in Photochemistry for Organic Synthesis: Flow Chemistry, High-Throughput Experimentation, Scale-up, and Photoelectrochemistry

Photoinduced chemical transformations have received in recent years a tremendous amount of attention, providing a plethora of opportunities to synthetic organic chemists. However, performing a photochemical transformation can be quite a challenge because of various issues related to the delivery of photons. These challenges have barred the widespread adoption of photochemical steps in the chemical industry. However, in the past decade, several technological innovations have led to more reproducible, selective, and scalable photoinduced reactions. Herein, we provide a comprehensive overview of these exciting technological advances, including flow chemistry, high-throughput experimentation, reactor design and scale-up, and the combination of photo- and electro-chemistry.

Photons or Electrons? A Critical Comparison of Electrochemistry and Photoredox Catalysis for Organic Synthesis

Redox processes are at the heart of synthetic methods that rely on either electrochemistry or photoredox catalysis, but how do electrochemistry and photoredox catalysis compare? Both approaches provide access to high energy intermediates (e.g., radicals) that enable bond formations not constrained by the rules of ionic or 2 electron (e) mechanisms. Instead, they enable 1e mechanisms capable of bypassing electronic or steric limitations and protecting group requirements, thus enabling synthetic chemists to disconnect molecules in new and different ways. However, while providing access to similar intermediates, electrochemistry and photoredox catalysis differ in several physical chemistry principles. Understanding those differences can be key to designing new transformations and forging new bond disconnections. This review aims to highlight these differences and similarities between electrochemistry and photoredox catalysis by comparing their underlying physical chemistry principles and describing their impact on electrochemical and photochemical methods.

Accelerated and Scalable C(sp3)-H Amination via Decatungstate Photocatalysis Using a Flow Photoreactor Equipped with High-Intensity LEDs

Carbon-nitrogen bonds are ubiquitous in biologically active compounds, prompting synthetic chemists to design various methodologies for their preparation. Arguably, the ideal synthetic approach is to be able to directly convert omnipresent C-H bonds in organic molecules, enabling even late-stage functionalization of complex organic scaffolds. While this approach has been thoroughly investigated for C(sp2)-H bonds, only few examples have been reported for the direct amination of aliphatic C(sp3)-H bonds. Herein, we report the use of a newly developed flow photoreactor equipped with high intensity chip-on-board LED technology (144 W optical power) to trigger the regioselective and scalable C(sp3)-H amination via decatungstate photocatalysis. This high-intensity reactor platform enables simultaneously fast results gathering and scalability in a single device, thus bridging the gap between academic discovery (mmol scale) and industrial production (>2 kg/day productivity). The photocatalytic transformation is amenable to the conversion of both activated and nonactivated hydrocarbons, leading to protected hydrazine products by reaction with azodicarboxylates. We further validated the robustness of our manifold by designing telescoped flow approaches for the synthesis of pyrazoles, phthalazinones and free amines.

A Photosensitizer-Free Radical Cascade for Synthesizing CF3-Containing Polycyclic Quinazolinones with Visible Light

Herein, we report an efficient photoinduced radical tandem trifluoromethylation/cyclization reaction of N-cyanamide alkenes for the synthesis of functionalized quinazolinones. Importantly, the reaction is carried out under mild conditions without any additional photosensitizer, metal, or extra additives. A series of trifluoromethyl quinazolinones were prepared efficiently with good yields and excellent functional group tolerance. Preliminary mechanistic experiments were conducted to indicate that the transformation proceeds via a possible mechanism involving photoexcited EDA complex and chain propagation.

Recent Advances in Transition-Metal Mediated Trifluoromethylation Reactions

Fluorine compounds are known for their abundance in more than 20% of pharmaceutical and agrochemical products mainly due to the enhanced lipophilicity, metabolic stability and pharmacokinetic properties of organofluorides. Consequently,...

A photoinduced transient activating strategy for late-stage chemoselective C(sp3)–H trifluoromethylation of azines

The direct functionalization of C(sp³)–H bonds is an ultimately ideal synthetic strategy with high atom economy and step efficiency. However, the direct trifluoromethylation of electron-deficient heteroaryl adjacent C(sp³)–H bonds remains a formidable challenge. We have described a transient activating strategy involving a Tf-shift process and π–π stacking interaction for catalyst-free direct benzylic C(sp³)–H trifluoromethylation of azines, such as pyridine, pyrimidine, quinoline, dihydropyridinone, tetrahydroisoquinoline and tetrahydroquinazoline, with an air-stable crystalline imidazolium sulfonate reagent IMDN-Tf. This bench-stable cationic reagent offers a scalable and practical protocol for the late-stage modification of drug molecules with high site selectivity, which avoids the prefunctionalization and the use of stoichiometric metals and strong oxidants. Furthermore, comprehensive mechanistic studies revealed the determining effect of π–π stacking for the activation of azinylic C(sp³)–H bonds.

Late-stage C(sp³)–H functionalization of unactivated azines: the traceless Tf switching process offers ample opportunities for site-selective derivatization of heteroaryls, allowing for the rapid increase of molecular complexity.

Iron-catalyzed regioselective synthesis of (E)-vinyl sulfones mediated by unprotected hydroxylamines

An Fe-catalyzed unprotected hydroxylamine mediated Heck-type coupling between sulfinic acids and alkenes furnished structurally important (E)-vinyl sulfones with moderate to good yields, high atom-economy and regioselectivity.

Photochemical and electrochemical regioselective cross-dehydrogenative C(sp2)–H sulfenylation and selenylation of substituted benzo[a]phenazin-5-ols

The essence of photo- and electrochemistry: sulfenylation and selenylation of substituted benzo[a]phenazin-5-ols through cross-dehydrogenative C(sp2)–H functionalization.

Copper-Catalyzed Direct Perfluoroalkylation of Heteroarenes

An efficient and broadly applicable process is reported for the copper-catalyzed direct perfluoroalkylation of C-H bonds in heteroarenes with commercially available perfluoroalkyl iodides. This reaction is based on a simple combination of copper(I) iodide and 1,10-phenanthroline enabling the easy reduction of perfluoroalkyl iodides to the corresponding radical species that add to a wide range of heteroarenes including benzofurans, benzothiophenes, (aza)indoles, furans and pyrroles. High levels of regioselectivity were obtained in all cases and the efficiency and robustness of this process was highlighted by the direct perfluoroalkylation of furan-containing peptides.

The development of luminescent solar concentrator-based photomicroreactors: a cheap reactor enabling efficient solar-powered photochemistry

Sunlight strikes our planet every day with more energy than we consume in an entire year. Therefore, many researchers have explored ways to efficiently harvest and use sunlight energy for the activation of organic molecules. However, implementation of this energy source in the large-scale production of fine chemicals has been mostly neglected. The use of solar energy for chemical transformations suffers from potential drawbacks including scattering, reflections, cloud shading and poor matches between the solar emission and absorption characteristics of the photochemical reaction. In this account, we provide an overview of our efforts to overcome these issues through the development of Luminescent Solar Concentrator-based PhotoMicroreactors (LSC-PM). Such reactors can efficiently convert solar energy with a broad spectral distribution to concentrated and wavelength-shifted irradiation which matches the absorption maximum of the photocatalyst. Hence, the use of these conceptually new photomicroreactors provides an increased solar light harvesting capacity, enabling efficient solar-powered photochemistry.

1,2-Bis-perfluoroalkylations of alkenes and alkynes with perfluorocarboxylic anhydrides via the formation of perfluoroalkylcopper intermediates

A novel, Cu-mediated protocol toward the 1,2-bis-perfluoroalkyaltion of alkenes/alkynes was developed. The method proceeded with perfluorocarboxylic anhydrides as inexpensive and readily available perfluoroalkyl sources. Diacyl peroxide was generated in situ from the perfluorocarboxylic anhydrides and H₂O₂. The key step in this reaction is the formation of a stable perfluoroalkylcopper intermediate that is achieved with the aid of a bipyridyl ligand. Subsequent reaction of the intermediate with perfluoroalkyl-containing alkyl or vinyl radicals affords the desired products.

Potent Tau Aggregation Inhibitor D-Peptides Selected against Tau-Repeat 2 Using Mirror Image Phage Display

Alzheimer's disease and other Tauopathies are associated with neurofibrillary tangles composed of Tau protein, as well as toxic Tau oligomers. Therefore, inhibitors of pathological Tau aggregation are potentially useful candidates for future therapies targeting Tauopathies. Two hexapeptides within Tau, designated PHF6* (275-VQIINK-280) and PHF6 (306-VQIVYK-311), are known to promote Tau aggregation. Recently, the PHF6* segment has been described as the more potent driver of Tau aggregation. We therefore employed mirror-image phage display with a large peptide library to identify PHF6* fibril binding peptides consisting of D-enantiomeric amino acids. The suitability of D-enantiomeric peptides for in vivo applications, which are protease stable and less immunogenic than L-peptides, has already been demonstrated. The identified D-enantiomeric peptide MMD3 and its retro-inverso form, designated MMD3rev, inhibited in vitro fibrillization of the PHF6* peptide, the repeat domain of Tau as well as full-length Tau. Dynamic light scattering, pelleting assays and atomic force microscopy demonstrated that MMD3 prevents the formation of tau β-sheet-rich fibrils by diverting Tau into large amorphous aggregates. NMR data suggest that the D-enantiomeric peptides bound to Tau monomers with rather low affinity, but ELISA (enzyme-linked immunosorbent assay) data demonstrated binding to PHF6* and full length Tau fibrils. In addition, molecular insight into the binding mode of MMD3 to PHF6* fibrils were gained by in silico modelling. The identified PHF6*-targeting peptides were able to penetrate cells. The study establishes PHF6* fibril binding peptides consisting of D-enantiomeric amino acids as potential molecules for therapeutic and diagnostic applications in AD research.

Radical Trifluoroacetylation of Alkenes Triggered by a Visible-Light-Promoted C-O Bond Fragmentation of Trifluoroacetic Anhydride

We report a mild and operationally simple trifluoroacylation strategy of olefines, that utilizes trifluoroacetic anhydride as a low‐cost and readily available reagent. This light‐mediated process is fundamentally different from conventional methodologies and occurs through a trifluoroacyl radical mechanism promoted by a photocatalyst, which triggers a C−O bond fragmentation. Mechanistic studies (kinetic isotope effects, spectroelectrochemistry, optical spectroscopy, theoretical investigations) highlight the evidence of a fleeting CF₃CO radical under photoredox conditions. The trifluoroacyl radical can be stabilized under CO atmosphere, delivering the trifluoroacetylation product with higher chemical efficiency. Furthermore, the method can be turned into a trifluoromethylation protocol by simply changing the reaction parameters. Beyond simple alkenes, this method allows for chemo‐ and regioselective functionalization of small‐molecule drugs and common pharmacophores.

Annulation of CF3-Imidoyl Sulfoxonium Ylides with 1,3-Dicarbonyl Compounds: Access to 1,2,3-Trisubstituted 5-Trifluoromethylpyrroles

A lithium-bromide-promoted nucleophilic substitution/annulation cascade reaction between CF₃-imidoyl sulfoxonium ylides and 1,3-dicarbonyl compounds has been established, and the corresponding 1,2,3-trisubstituted 5-trifluoromethylpyrroles have been obtained in 27-78% yield. This reaction features a broad substrate scope and generates dimethyl sulfoxide and H₂O as byproducts.