TiO2 on Gold Nanostars Enhances Photocatalytic Water Reduction in the Near-Infrared Regime

In-situ and wavelength-dependent photocatalytic strain evolution of a single Au nanoparticle on a TiO2 film

Photocatalysis is a promising technique due to its capacity to efficiently harvest solar energy and its potential to address the global energy crisis. However, the structure-activity relationships of photocatalyst during wavelength-dependent photocatalytic reactions remains largely unexplored because it is difficult to measure under operating conditions. Here we show the photocatalytic strain evolution of a single Au nanoparticle (AuNP) supported on a TiO2 film by combining three-dimensional (3D) Bragg coherent X-ray diffraction imaging with an external light source. The wavelength-dependent generation of reactive oxygen species (ROS) has significant effects on the structural deformation of the AuNP, leading to its strain evolution. Density functional theory (DFT) calculations are employed to rationalize the induced strain caused by the adsorption of ROS on the AuNP surface. These observations provide insights of how the photocatalytic activity impacts on the structural deformation of AuNP, contributing to the general understanding of the atomic-level catalytic adsorption process.

Plasmonic effect of metal nanoparticles on the photocatalytic properties of TiO2/rGO composite

A comparative study of the plasmon effect of Ag and Au nanoparticles on TiO2/rGO nanocomposite was carried out. The synthesis of Au and Ag nanoparticles was carried out by laser ablation. The morphology and structure of the nanocomposites were studied by EDA, HRTEM, XRD and Raman spectroscopy. It was shown that the absorption capacity of the nanocomposite material was increased in the visible range of the spectrum when Ag and Au nanoparticles were added to TiO2/rGO. This leads to an increase in their photocatalytic activity. The photocurrent generated by NC/Au 10-11films is in 3.8 times and NC/Ag 10-12is in 2 times higher compared to pure TiO2/rGO film. Similar results were obtained from experimental data on the dyes photodegradation. In the presence of plasmon nanoparticles a significant enhancement in the electrical properties of the TiO2/rGO nanocomposite was recorded. The charge carrier transfer resistance in nanocomposites was decreased by almost ∼7 times for NC/Au,10-11and ∼4 times for NC/Ag,10-12films compared to pure TiO2/rGO. In addition, for nanocomposites with Ag or Au nanoparticles, a decrease in the effective electron lifetime was observed. The data obtained allow us to conclude that plasmonic NPs have a synergistic effect in TiO2/rGO nanocomposites, which consists in modifying both their light-harvesting properties and charge-transport characteristics. The results obtained can be used for the design of materials with improved photocatalytic and optoelectronic characteristics.

Plasmonic coupling-boosted photothermal composite photocatalyst for achieving near-infrared photocatalytic hydrogen production

The development of photocatalysts that effectively utilize low-energy photons for efficient photocatalysis still faces a number of challenges. Herein, an efficient NIR-driven system based on WO3-x/ZnIn2S4 (WO3-x/ZIS) prepared by a simple low-temperature water-bath method, and the optimal WO3-x/ZIS-3 composites can reach a hydrogen-production efficiency of 14.05 μmol g-1h-1 under NIR light irradiation. The localized surface plasmon (LSPR) resonance effect in WO3-x quantum dots (QDs) not only broadens the ZIS photo-response range, but also the photothermal effect of WO3-x can increase the local reaction temperature of WO3-x/ZIS composite system, thus enhancing the photothermal-assisted photocatalytic activity. In addition, density functional theory (DFT) calculations show that the difference in work function between WO3-x and ZIS can lead to the formation of interfacial electric field (IEF), which not only promotes the separation and migration efficiency of photogenerated carriers, but also facilitates the photocatalytic water splitting for hydrogen production. This study provides possible directions for the construction of NIR-driven photothermal-assisted photocatalytic hydrogen production system.

Artificial Photosynthetic System with Spatial Dual Reduction Site Enabling Enhanced Solar Hydrogen Production

Although S-scheme artificial photosynthesis shows promise for photocatalytic hydrogen production, traditional methods often overly concentrate on a single reduction site. This limitation results in inadequate redox capability and inefficient charge separation, which hampers the efficiency of the photocatalytic hydrogen evolution reaction. To overcome this limitation, a double S-scheme system is proposed that leverages dual reduction sites, thereby preserving energetic photo-electrons and holes to enhance apparent quantum efficiency. The design features a double S-scheme junction consisting of CdS nanospheres decorated with anatase TiO2 nanoparticles coupled with graphitic C3 N4 . The as-prepared catalyst exhibits a hydrogen evolution rate of 26.84 mmol g-1  h-1 and an apparent quantum efficiency of 40.2% at 365 nm. This enhanced photocatalytic hydrogen evolution is ascribed to the efficient charge separation and transport induced by the double S-scheme. Both theoretical calculations and comprehensive spectroscopy tests (both in situ and ex situ) affirm the efficient charge transport across the catalyst interface. Moreover, substituting the reduction-type catalyst CdS with other similar sulfides like ZnIn2 S4 , ZnS, MoS2 and In2 S3 further confirms the feasibility of the proposed double S-scheme configuration. The findings provide a pathway to designing more effective double S-scheme artificial photosynthetic systems, opening up fresh perspectives in enhancing photocatalytic hydrogen evolution performance.

Multiplex SERS detection of polycyclic aromatic hydrocarbon (PAH) pollutants in water samples using gold nanostars and machine learning analysis

Polycyclic aromatic hydrocarbons (PAHs) have attracted a lot of environmental concern because of their carcinogenic and mutagenic properties, and the fact they can easily contaminate natural resources such as drinking water and river water. This study presents a simple and sensitive point-of-care SERS detection of PAHs combined with machine learning algorithms to predict the PAH content more precisely and accurately in real-life samples such as drinking water and river water. We first synthesized multibranched sharp-spiked surfactant-free gold nanostars (GNSs) that can generate strong surface-enhanced Raman scattering (SERS) signals, which were further coated with cetyltrimethylammonium bromide (CTAB) for long-term stability of the GNSs as well as to trap PAHs. We utilized CTAB-capped GNSs for solution-based 'mix and detect' SERS sensing of various PAHs including pyrene (PY), nitro-pyrene (NP), anthracene (ANT), benzo[a]pyrene (BAP), and triphenylene (TP) spiked in drinking water and river water using a portable Raman module. Very low limits of detection (LOD) were achieved in the nanomolar range for the PAHs investigated. More importantly, the detected SERS signal was reproducible for over 90 days after synthesis. Furthermore, we analyzed the SERS data using artificial intelligence (AI) with machine learning algorithms based on the convolutional neural network (CNN) model in order to discriminate the PAHs in samples more precisely and accurately. Using a CNN classification model, we achieved a high prediction accuracy of 90% in the nanomolar detection range and an f1 score (harmonic mean of precision and recall) of 94%, and using a CNN regression model, achieved an RMSEconc = 1.07 × 10-1 μM. Overall, our SERS platform can be effectively and efficiently used for the accurate detection of PAHs in real-life samples, thus opening up a new, sensitive, selective, and practical approach for point-of-need SERS diagnosis of small molecules in complex practical environments.

Near-Infrared-Driven Nanorocket for Rapid and Ultrasensitive Detection of MicroRNA

Herein, by introducing gold nanostars (AuNSs) as fuel core, a near-infrared-driven nanorocket (NIDNR) with pretty fast walking was exploited for ultrasensitive miRNA detection. Compared with traditional nanomaterials-comprised nanomachines (NMs), the NIDNR possesses much better kinetic and thermodynamic performance owing to the extra photothermal driving force from localized surface plasmon (LSP). Impressively, the whole reaction time of NIDNR down to 15 min was realized, which is almost more than 8 times beyond those of conventional DNA-based NMs. This way, the inherent obstacle of traditional NMs, including long reaction time and low efficiency, could be easily addressed. As a proof of concept, the NIDNR was successfully applied to develop an electrochemical biosensing platform for rapid and sensitive detection of miRNA with an LOD down to 2.95 aM and achieved the real-time assay of real biological samples from human hepatocellular carcinoma cells (MHCC97L) and HeLa, thus providing an innovative insight to design more versatile DNA nanomachines for ultimate application in biosensing platform construction and clinical sample detection.

Epitaxial growth of highly symmetrical branched noble metal-semiconductor heterostructures with efficient plasmon-induced hot-electron transfer

Epitaxial growth is one of the most commonly used strategies to precisely tailor heterostructures with well-defined compositions, morphologies, crystal phases, and interfaces for various applications. However, as epitaxial growth requires a small interfacial lattice mismatch between the components, it remains a challenge for the epitaxial synthesis of heterostructures constructed by materials with large lattice mismatch and/or different chemical bonding, especially the noble metal-semiconductor heterostructures. Here, we develop a noble metal-seeded epitaxial growth strategy to prepare highly symmetrical noble metal-semiconductor branched heterostructures with desired spatial configurations, i.e., twenty CdS (or CdSe) nanorods epitaxially grown on twenty exposed (111) facets of Ag icosahedral nanocrystal, albeit a large lattice mismatch (more than 40%). Importantly, a high quantum yield (QY) of plasmon-induced hot-electron transferred from Ag to CdS was observed in epitaxial Ag-CdS icosapods (18.1%). This work demonstrates that epitaxial growth can be achieved in heterostructures composed of materials with large lattice mismatches. The constructed epitaxial noble metal-semiconductor interfaces could be an ideal platform for investigating the role of interfaces in various physicochemical processes.

Ultra-trace SERS detection of cocaine and heroin using bimetallic gold-silver nanostars (BGNS-Ag)

A rapid, in-field, and reliable method for the detection of illegal drugs of abuse in biological fluids without any sample pretreatment would potentially be helpful for law enforcement, drug control officials, and public healthcare. In this study, we presented a cost-effective and highly reproducible solution-based surface-enhanced Raman scattering (SERS) platform utilizing a portable Raman instrument for fast sensitive SERS detection of illegal drugs, such as cocaine, and heroin in human urine without any sample preprocessing. The SERS platform was constructed for the first time by combining the superior SERS enhancement properties of bimetallic silver-coated gold nanostars (BGNS-Ag) and the advantages of suitable alkaline metal salts such as NaI for SERS signal amplification. The effects of the silver thickness of BGNS-Ag and alkaline salts on the SERS performance were investigated in detail; we observed that the maximum SERS enhancement was obtained for BGNS-Ag with the maximum silver thickness (54 ± 5 nm) in presence of NaI salt. Our SERS platform shows ultra-high sensitivity of cocaine and heroin with a limit of detection (LOD) as low as 10 pg/mL for cocaine and 100 pg/mL for heroin, which was 100 times lower than that of the traditional silver nanoparticle-based illegal drug detection. As a demonstration, the platform was further applied to detect cocaine and heroin spiked in human urine without any sample preprocessing achieving a LOD of 100 pg/mL for cocaine and 1 ng/mL for heroin. Overall, our SERS detection platform shows potential for rapid, onsite, ultra-low-cost portable applications for trace detection of illegal drugs and biomarkers.

A hybrid plasmonic nanoprobe using polyvinylpyrrolidone-capped bimetallic silver-gold nanostars for highly sensitive and reproducible solution-based SERS sensing

Practical solution-based assays using surface-enhanced Raman spectroscopy (SERS) with portable instrumentation are currently of particular interest for rapid, efficient, and low-cost detection of analytes. However, current assays still have limited applicability due to their poor sensitivity and reproducibility. Herein, we demonstrate highly stable polyvinylpyrrolidone (PVP)-capped bimetallic silver-coated gold nanostars (BGNS-Ag-PVP) as a solution-based SERS nanoprobe that is capable of producing a strong, uniform, and reproducible SERS signal using a portable Raman instrument. The developed hybrid BGNS-Ag-PVP nanostructure shows tunable optical properties with improved SERS sensitivity and reproducibility as compared to gold nanostars. We have synthesized bimetallic nanoprobes BGNS-Ag-PVP having three different silvers, referred to as BGNS-Ag-PVP-1, BGNS-Ag-PVP-2, and BGNS-Ag-PVP-3. The SERS performance of BGNS-Ag-PVP was studied using methylene blue (Meb) as a probe molecule, and we achieved a detection limit of up to 10 nM indicating the high sensitivity of the solution-based SERS platform. The application of such bimetallic nanoparticles is demonstrated via the sensitive detection of the antithyroid drug methimazole (Mz) used as a model analyte system. We have achieved a detection limit of 1 nM for Mz spiked with human urine indicating three orders of magnitude lower than previously reported solution-based SERS detection methods. Furthermore, the SERS performance was reproducible over 3 months indicating excellent stability and repeatability. The result illustrates the potential of this solution-based SERS detection platform as a promising sensing tool for analytes such as illicit drugs, and biomarkers that have affinity to bind on nanoprobes.

UV-Visible photo-reactivity of permanently polarized inorganic nanotubes coupled to gold nanoparticles

Hybrid aluminosilicate nanotubes (Imo-CH₃) have the ability to trap small organic molecules inside their hydrophobic internal cavity while being dispersed in water owing to their hydrophilic external surface. They also display a curvature-induced polarization of their wall, which favors reduction outside the nanotubes and oxidation inside. Here, we coupled bare plasmonic gold nanoparticles (GNPs) with Imo-CH₃ and analyzed for the first time the redox reactivity of these hybrid nano-reactors upon UV illumination. We show that the coupling between GNPs and Imo-CH₃ significantly enhances the nanotube photocatalytic activity, with a large part of water reduction occurring directly on the gold surface. The coupling mechanism strongly influences the initial H₂ production rate, which can go from ×10 to more than ×90 as compared to bare Imo-CH₃ depending on the synthesis route of the GNPs. The present results show that this hybrid photocatalytic nano-reactor benefits from a synergy of polarization and confinement effects that facilitate efficient H₂ production.

Hybrid TiO2:Au nanostars based polymeric membranes for photocatalytic degradation of ciprofloxacin in water samples

Antibiotics represent one increasingly harmful type of contaminant of emerging concern in treated and non-treated water. They cause the generation of antibiotic-multiresistant organisms, one of the major challenges in current medicine. Plasmonic-photocatalysis using solar energy represents a promising solution for their removal with low energy consumption. Its successful application requires the improvement of photocatalysts' efficiency under sunlight and the development of robust, durable, and efficient substrates for photocatalysts immobilisation. In this work, hybrid TiO₂:Au nanostars were initially synthesised. Then, two porous membranes were prepared to support this nanocatalyst based on poly (vinylidenefluoride-co-hexafluoropropylene) polymer. Doctor blade and salt leaching casting methods, combined with temperature-induced phase separation, were used to generate membranes with high porosity, 80-90%, which was maintained after nanoparticle incorporation (3, 8 and 10 wt%). The photocatalytic activity of the nanocomposite membranes was tested through the degradation of the antibiotic ciprofloxacin under UV and visible radiation. Salt-leaching membranes containing 10 wt% nanoparticles presented the highest degradation efficiencies, 45% under UV and 35% under visible radiation. In contrast, doctor blade membranes showed 36% and 32% degradation efficiencies, respectively. The reusability of the membranes was assessed in repeated cycles, presenting an average efficiency loss of only 2% after three uses. Finally, the reusability of these membranes was also tested in treated effluent water matrixes, presenting similar, or even better, degradation efficiencies, and a minimum reusability efficiency lost 0-1%. The results demonstrate that these membranes are a promising alternative for the degradation of a wide variety of contaminants under sunlight radiation.

Exploiting the LSPR effect for an enhanced photocatalytic hydrogen evolution reaction

Incorporation of plasmonic metals is one of the most widely adopted strategies for improving the photocatalytic hydrogen evolution reaction (HER) activity of semiconductor photocatalysts. This article summarizes recent advances in the development of plasmonic metal-semiconductor photocatalysts and four localized surface plasmon resonance (LSPR) driven mechanisms by which plasmonic metal nanoparticles can contribute to enhancement of HER activity. In addition, principles for maximizing the contribution of these LSPR driven mechanisms are highlighted to provide insights for future design of plasmonic metal-semiconductor photocatalysts with enhanced HER activity.

Solution-Based Ultra-Sensitive Surface-Enhanced Raman Scattering Detection of the Toxin Bacterial Biomarker Pyocyanin in Biological Fluids Using Sharp-Branched Gold Nanostars

There is a critical need for sensitive rapid point-of-care detection of bacterial infection biomarkers in complex biological fluids with minimal sample preparation, which can improve early-stage diagnosis and prevent several bacterial infections and fatal diseases. A solution-based surface-enhanced Raman scattering (SERS) detection platform has long been sought after for low cost, rapid, and on-site detection of analyte molecules, but current methods still exhibit poor sensitivity. In this study, we have tuned the morphology of the surfactant-free gold nanostars (GNSs) to achieve sharp protruding spikes for maximum SERS enhancement. We have controlled the GNS spike morphologies and optimized SERS performance in the solution phase using para-mercaptobenzoic acid as an SERS probe. To illustrate the potential for point-of-care applications, we have utilized a portable Raman instrument for measurements. For pathogenic agent sensing applications, we demonstrated rapid and sensitive detection of the toxin biomarker pyocyanin (PYO) used as the bacterial biomarker model system. Pyocyanin is a toxic compound produced and secreted by the common water-borne Gram-negative bacterium Pseudomonas aeruginosa, a pathogen known for advanced antibiotic resistance and association with serious diseases such as ventilator-associated pneumonia and cystic fibrosis. The limit of detection (LOD) achieved for PYO was 0.05 nM using sharp branched GNSs. Furthermore, as a proof of strategy, this SERS detection of PYO was performed directly in drinking water, human saliva, and human urine without any sample treatment pre-purification, achieving an LOD of 0.05 nM for drinking water and 0.4 nM for human saliva and urine. This work provides a proof-of-principle demonstration for the high sensitivity detection of the bacterial toxin biomarker with minimal sample preparation: the "mix and detect" detection of the GNS platform is simple, robust, and rapid, taking only 1-2 min for each measurement. Overall, our SERS detection platform shows great potential for point-of-need sensing and point-of-care diagnostics in biological fluids.

Size Effect in Hybrid TiO2:Au Nanostars for Photocatalytic Water Remediation Applications

TiO₂:Au-based photocatalysis represents a promising alternative to remove contaminants of emerging concern (CECs) from wastewater under sunlight irradiation. However, spherical Au nanoparticles, generally used to sensitize TiO₂, still limit the photocatalytic spectral band to the 520 nm region, neglecting a high part of sun radiation. Here, a ligand-free synthesis of TiO₂:Au nanostars is reported, substantially expanding the light absorption spectral region. TiO₂:Au nanostars with different Au component sizes and branching were generated and tested in the degradation of the antibiotic ciprofloxacin. Interestingly, nanoparticles with the smallest branching showed the highest photocatalytic degradation, 83% and 89% under UV and visible radiation, together with a threshold in photocatalytic activity in the red region. The applicability of these multicomponent nanoparticles was further explored with their incorporation into a porous matrix based on PVDF-HFP to open the way for a reusable energy cost-effective system in the photodegradation of polluted waters containing CECs.

Bimetallic Gold Nanostars Having High Aspect Ratio Spikes for Sensitive Surface-Enhanced Raman Scattering Sensing

There has been increasing interest in evolution of plasmonic nanoplatforms based on noble metal nanoparticles to achieve ultrasensitive detection of trace analyte molecules through solution-based surface-enhanced Raman spectroscopy (SERS). This work presents a surfactant-free synthesis method of bimetallic gold nanostars coated with silver (BGNS-Ag) having sharp, high aspect-ratio spikes for achieving ultrahigh detection sensitivity and high reproducibility. Specifically, the unique BGNS-Ag platform combines both the strong SERS enhancement effects of gold nanostar sharp spikes and the high scattering feature of the silver-gold bimetallic structure. To achieve SERS reproducibility, this solution-based SERS measurement requires minimal sample preparation without addition of any external reagents, which can cause irregular aggregation of nanoparticles and reduce the reproducibility of SERS measurements. Moreover, we have streamlined our SERS sensing procedure by using standard well-plates and a portable Raman device for SERS measurements, which could be utilized for rapid on-site detection. This solution-based SERS performance was studied using methylene blue (MB) as a model analyte system. The detection limit of MB was as low as 42 pM, indicating high sensitivity of detection using BGNS-Ag. To illustrate the usefulness for environmental sensing, we showed that the SERS sensor can detect a pesticide, thiram, at a concentration as low as 0.8 nM. This study demonstrated that the BGNS-Ag system could serve as an effective and versatile plasmonic-active platform for reproducible, fast, and in-field detection of small organic analytes at trace levels.

Ultra-high SERS detection of consumable coloring agents using plasmonic gold nanostars with high aspect-ratio spikes

Solution-based SERS detection by using a portable Raman instrument has emerged as an important tool due to its simplicity, and flexibility for rapid and on-site screening of analyte molecules. However, this method has several shortcomings, including poor sensitivity especially for weak-affinity analyte molecules, where there is no close contact between the plasmonic metal surface and analyte molecule. Examples of weak-affinity molecules include pigment molecules that are commonly used as a consumable coloring agent, such as allura red (AR), and sunset yellow (SY). As high consumption of colorant agents has been shown to cause adverse effects on human health, there is a strong need to develop a simple and practical sensing system with high sensitivity for these agents. Here we present a novel, highly sensitive solution-based SERS detection method for AR, and SY by using CTAC capped gold nanostars (GNS) having different aspect ratios (GNS-2, GNS-4, and GNS-5) without utilizing any aggregating agents which can enhance SERS signal however it reduces batch to batch reproducibility. The influence of the aspect ratio of GNS on SERS properties was investigated. We have achieved a limit of detection (LOD) of AR and SY as low as 0.5 and 1 ppb, respectively by using GNS-5 with the advantages of minimal sample preparation by just mixing the analyte solution into a well plate containing GNS solution. In addition, excellent colloidal stability and reproducibility have further enhanced the applicability in real-world samples. Overall, our results evidence that the solution-based SERS detection platform using high aspect-ratio GNS can be applied for practical application to detect pigment molecules in real samples with satisfactory results.

Quantifying Hot Electron Energy Contributions in Plasmonic Photocatalysis Using Electrochemical Surface-Enhanced Raman Spectroscopy

Due to the challenge in measuring hot electron energy under reaction conditions, very few studies focus on experimental determination of hot carrier energy. Here, we adjust the energy state of free electrons in Au nanoparticles to quantify the hot electron energy in plasmonic photocatalysis. Reactant molecules with different reduction potentials such as 4-nitrothiophenol (4-NTP), 4-iodothiophenol (4-ITP), etc. are chosen as molecular probes to investigate the reducing ability of hot electrons. By comparing the voltage required to achieve the same conversion of photo- and electro-reaction pathways, we calibrate the maximum energy efficiency of hot electrons in 4-NTP reduction to be 0.32 eV, which is much lower than the excitation photon energy of 1.96 eV. Our work provides insight into the energy distribution of hot electrons and will be helpful for rational design of highly efficient plasmon-mediated chemical reactions.

Hybrid Plasmonic Nanomaterials for Hydrogen Generation and Carbon Dioxide Reduction

The successful development of artificial photosynthesis requires finding new materials able to efficiently harvest sunlight and catalyze hydrogen generation and carbon dioxide reduction reactions. Plasmonic nanoparticles are promising candidates for these tasks, due to their ability to confine solar energy into molecular regions. Here, we review recent developments in hybrid plasmonic photocatalysis, including the combination of plasmonic nanomaterials with catalytic metals, semiconductors, perovskites, 2D materials, metal-organic frameworks, and electrochemical cells. We perform a quantitative comparison of the demonstrated activity and selectivity of these materials for solar fuel generation in the liquid phase. In this way, we critically assess the state-of-the-art of hybrid plasmonic photocatalysts for solar fuel production, allowing its benchmarking against other existing heterogeneous catalysts. Our analysis allows the identification of the best performing plasmonic systems, useful to design a new generation of plasmonic catalysts.

Efficient pollutant degradation under ultraviolet to near-infrared light irradiation and dark condition using CuSe nanosheets: Mechanistic insight into degradation

The hydrothermally prepared two-dimensional copper selenide nanosheets (2D CuSe NSs) have been employed for the first time to degrade rhodamine B (RhB) in the presence of hydrogen peroxide (H₂O₂) under ultraviolet to near-infrared (NIR) light irradiation and dark condition. The experimental measurements demonstrate that 99.7% RhB is degraded under NIR light irradiation for 120 min. Moreover, the experimental tests clearly demonstrate that the 2D CuSe NSs display excellent ability to degrade RhB under dark condition. The different degradation mechanisms under the light irradiation and dark condition have been revealed by the experimental tests through the investigation of H₂O₂ role and the evaluation of hydroxyl radicals (•OH) and H₂O₂ concentration during the degradation reaction. Under light irradiation, the H₂O₂ traps the photogenerated electrons of the CuSe to generate •OH and hydroxide ion (OH^-), and the holes react with OH^- to produce •OH, making RhB to be degraded efficiently. Under dark conduction, the 2D CuSe NSs react with H₂O₂ to exhibit Fenton-like process to degrade RhB with a degradation rate of 90.0% within 120 min. This work opens a pathway for developing nanostructures with full-solar-responsive and strong near-infrared photocatalytic activity as well as Fenton-like reaction to efficiently degrade pollutants under light irradiation and dark condition.

In situ configuration of dual S-scheme BP/(Ti3C2Tx@TiO2) heterojunction for broadband spectrum solar-driven photocatalytic H2 evolution in pure water

Artificial photocatalysis with high-efficiency is a promising route for storing sustainable energy from water splitting. Whereas it is challenging to broaden the solar-spectrum responsive window for harvesting high level of conversion. Herein, based on the band-matching engineering theory, a design of dual S-Scheme heterojunction system is proposed and established in a BP/(Ti₃C₂T_x@TiO₂) composite photocatalyst. The complementary light response region between TiO₂ and BP realizes the extension of solar energy utilization over a broad absorption window. Furthermore, this specific band-matching configuration endows spatially long-lived charge carriers with greater accumulation on the divided sub-systems, thereby maintaining the sufficient potential energy capacity associated with excellent photocatalytic properties (H₂ evolution rate of 564.8 μmol h^-1 g^-1 and AQE of 2.7% at 380 nm in pure water). This work describes a promising protocol of designing advanced broadband light-activated photocatalytic systems for solar-chemical energy conversion applications.

Controlling morphology evolution of titanium oxide-gold nanourchin for photocatalytic degradation of dyes and photoinactivation of bacteria in the infected wound

We report a one-pot, room-temperature, morphology-controlled synthesis of titanium oxide (TiO_x)-gold nanocomposites (TiO_x-Au NCs) using HAuCl₄ and TiCl₃ as precursors, and catechin as reducing agent. TiO_x-Au NCs have a range of morphologies from star-like to urchin-like shape depending on the concentration of TiCl₃ in the reaction mixture. The urchin-shaped TiO_x-Au NCs exhibited excellent photocatalytic activity toward dye degradation due to strong light absorption, plasmon-induced excitation, high conductivity of the gold, and reduced hole-electron pair recombination. TiO_x-Au NCs have the advantage of a wide range of light absorption and surface plasmon absorption-mediated excitation due to their abundant gold spikes, which enabled the degradation of dyes over 97% in 60 min, using a xenon lamp as a light source. In addition, TiO_x-Au NCs are highly efficient for the photoinactivation of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), and Candida albicans through the photodynamic generation of reactive oxygen species (ROS) and damage to the bacterial membrane. The catechin derivatives on the NCs effectively promoted curing MRSA infected wounds in rats through inducing collagen synthesis, migration of keratinocytes, and neovascularization.

Plasmon Induced Photocatalysts for Light-Driven Nanomotors

Micro/nanomachines (MNMs) correspond to human-made devices with motion in aqueous solutions. There are different routes for powering these devices. Light-driven MNMs are gaining increasing attention as fuel-free devices. On the other hand, Plasmonic nanoparticles (NPs) and their photocatalytic activity have shown great potential for photochemistry reactions. Here we review several photocatalyst nanosystems, with a special emphasis in Plasmon induced photocatalytic reactions, as a novel proposal to be explored by the MNMs community in order to extend the light-driven motion of MNMs harnessing the visible and near-infrared (NIR) light spectrum.

Development of a Structural Comparison Method to Promote Exploration of the Potential Energy Surface in the Global Optimization of Nanoclusters

A structural comparison method (SCM) was created to quantify the structural diversity of nanoclusters and was implemented into a global optimization algorithm to evaluate structural diversity between generated clusters on the fly and promote exploration of the potential energy surface. The SCM evaluated topological differences between clusters using the common neighbor analysis and provided a numerical measure of similarity between the two clusters. The SCM was implemented into a genetic algorithm by integrating it into a new structure + energy fitness operator such that structural diversity of clusters in the population and their energies were used to assign fitness values to clusters. The efficiency of the genetic algorithm with this new fitness operator was benchmarked against several Lennard-Jones clusters (LJ₃₈, LJ₇₅, and LJ₉₈) known to be difficult cases for global optimization algorithms. For LJ₃₈ and LJ₇₅, this new structure + energy fitness operator performed equally well or better than the energy fitness operator. However, the efficiency of locating the global minimum of LJ₉₈ decreased using this new structure + energy fitness operator. Further analysis of the genetic algorithm with this fitness operator showed that the algorithm did indeed promote exploration of the PES of LJ₉₈ as desired but hindered refinement of clusters, preventing it from locating the global minimum even if the energy funnel of the global minimum had been located.

Near-Infrared-Driven Photocatalysts: Design, Construction, and Applications

Photocatalysts, which utilize solar energy to catalyze the oxidation or reduction half reactions, have attracted tremendous interest due to their great potential in addressing increasingly severe global energy and environmental issues. Solar energy utilization plays an important role in determining photocatalytic efficiencies. In the past few decades, many studies have been done to promote photocatalytic efficiencies via extending the absorption of solar energy into near-infrared (NIR) light. This Review comprehensively summarizes the recent progress in NIR-driven photocatalysts, including the strategies to harvest NIR photons and corresponding photocatalytic applications such as the degradation of organic pollutants, water disinfection, water splitting for H₂ and O₂ evolution, CO₂ reduction, etc. The application of NIR-active photocatalysts employed as electrocatalysts is also presented. The subject matter of this Review is designed to present the relationship between material structure and material optical properties as well as the advantage of material modification in photocatalytic reactions. It paves the way for future material design in solar energy-related fields and other energy conversion and storage fields.

Recent Advances in the Design and Photocatalytic Enhanced Performance of Gold Plasmonic Nanostructures Decorated with Non-Titania Based Semiconductor Hetero-Nanoarchitectures

Plasmonic photocatalysts combining metallic nanoparticles and semiconductors have been aimed as versatile alternatives to drive light-assisted catalytic chemical reactions beyond the ultraviolet (UV) regions, and overcome one of the major drawbacks of the most exploited photocatalysts (TiO2 or ZnO). The strong size and morphology dependence of metallic nanostructures to tune their visible to near-infrared (vis-NIR) light harvesting capabilities has been combined with the design of a wide variety of architectures for the semiconductor supports to promote the selective activity of specific crystallographic facets. The search for efficient heterojunctions has been subjected to numerous studies, especially those involving gold nanostructures and titania semiconductors. In the present review, we paid special attention to the most recent advances in the design of gold-semiconductor hetero-nanostructures including emerging metal oxides such as cerium oxide or copper oxide (CeO2 or Cu2O) or metal chalcogenides such as copper sulfide or cadmium sulfides (CuS or CdS). These alternative hybrid materials were thoroughly built in past years to target research fields of strong impact, such as solar energy conversion, water splitting, environmental chemistry, or nanomedicine. Herein, we evaluate the influence of tuning the morphologies of the plasmonic gold nanostructures or the semiconductor interacting structures, and how these variations in geometry, either individual or combined, have a significant influence on the final photocatalytic performance.

Single Particle Approaches to Plasmon-Driven Catalysis

Plasmonic nanoparticles have recently emerged as a promising platform for photocatalysis thanks to their ability to efficiently harvest and convert light into highly energetic charge carriers and heat. The catalytic properties of metallic nanoparticles, however, are typically measured in ensemble experiments. These measurements, while providing statistically significant information, often mask the intrinsic heterogeneity of the catalyst particles and their individual dynamic behavior. For this reason, single particle approaches are now emerging as a powerful tool to unveil the structure-function relationship of plasmonic nanocatalysts. In this Perspective, we highlight two such techniques based on far-field optical microscopy: surface-enhanced Raman spectroscopy and super-resolution fluorescence microscopy. We first discuss their working principles and then show how they are applied to the in-situ study of catalysis and photocatalysis on single plasmonic nanoparticles. To conclude, we provide our vision on how these techniques can be further applied to tackle current open questions in the field of plasmonic chemistry.

Microfluidic Synthesis of Hybrid TiO2-Anisotropic Gold Nanoparticles with Visible and Near-Infrared Activity

Anisotropic gold nanoparticles (AuNPs), with their unique physical and optical properties, are emerging as smart and key nanomaterials and are being exploited in many crucial fields. To further improve their range of action, anisotropic AuNPs have been coupled with semiconductors, mainly TiO₂ (titania), receiving great interest as powerful platforms both in biomedicine and in catalytic applications. Such hybrid nanoparticles show new properties that arise from the synergic action of the components and rely on NP size, morphology, and arrangement. Therefore, continuous advances in design and fabrication of new hybrid titania@gold NPs (TiO₂@AuNPs) are urgent and highly desirable. Here, we propose an effective protocol to produce multibranched AuNPs covered by a controlled TiO₂ thin layer, exploiting a one-pot microfluidic process. The proposed method allows the in-flow and reliable synthesis of titania-functionalized-anisotropic gold nanoparticles by avoiding the use of toxic surfactants and controlling the titania shell formation. TiO₂@AuNPs have been fully characterized in terms of morphology, stability, and biocompatibility, and their activity in photocatalysis has been tested and verified.

Large-area periodic arrays of gold nanostars derived from HEPES-, DMF-, and ascorbic-acid-driven syntheses

With arms radiating from a central core, gold nanostars represent a unique and fascinating class of nanomaterials from which extraordinary plasmonic properties are derived. Despite their relevance to sensing applications, methods for fabricating homogeneous populations of nanostars on large-area planar surfaces in truly periodic arrays is lacking. Herein, the fabrication of nanostar arrays is demonstrated through the formation of hexagonal patterns of near-hemispherical gold seeds and their subsequent exposure to a liquid-state chemical environment that is conducive to colloidal nanostar formation. Three different colloidal nanostar protocols were targeted where HEPES, DMF, and ascorbic acid represent a key reagent in their respective redox chemistries. Only the DMF-driven synthesis proved readily adaptable to the substrate-based platform but nanostar-like structures emerged from the other protocols when synthetic controls such as reaction kinetics, the addition of Ag⁺ ions, and pH adjustments were applied. Because the nanostars were derived from near-hemispherical seeds, they acquired a unique geometry that resembles a conventional nanostar that has been truncated near its midsection. Simulations of plasmonic properties of this geometry reveal that such structures can exhibit maximum near-field intensities that are as much as seven-times greater than the standard nanostar geometry, a finding that is corroborated by surface-enhanced Raman scattering (SERS) measurements showing large enhancement factors. The study adds nanostars to the library of nanostructure geometries that are amenable to large-area periodic arrays and provides a potential pathway for the nanofabrication of SERS substrates with even greater enhancements.

Design-controlled synthesis of IrO2 sub-monolayers on Au nanoflowers: marrying plasmonic and electrocatalytic properties

We develop herein plasmonic-catalytic Au-IrO₂ nanostructures with a morphology optimized for efficient light harvesting and catalytic surface area; the nanoparticles have a nanoflower morphology, with closely spaced Au branches all partially covered by an ultrathin (1 nm) IrO₂ shell. This nanoparticle architecture optimizes optical features due to the interactions of closely spaced plasmonic branches forming electromagnetic hot spots, and the ultra-thin IrO₂ layer maximizes efficient use of this expensive catalyst. This concept was evaluated towards the enhancement of the electrocatalytic performances towards the oxygen evolution reaction (OER) as a model transformation. The OER can play a central role in meeting future energy demands but the performance of conventional electrocatalysts in this reaction is limited by the sluggish OER kinetics. We demonstrate an improvement of the OER performance for one of the most active OER catalysts, IrO₂, by harvesting plasmonic effects from visible light illumination in multimetallic nanoparticles. We find that the OER activity for the Au-IrO₂ nanoflowers can be improved under LSPR excitation, matching best properties reported in the literature. Our simulations and electrocatalytic data demonstrate that the enhancement in OER activities can be attributed to an electronic interaction between Au and IrO₂ and to the activation of Ir-O bonds by LSPR excited hot holes, leading to a change in the reaction mechanism (rate-determinant step) under visible light illumination.

Metal/semiconductor interfaces in nanoscale objects: synthesis, emerging properties and applications of hybrid nanostructures

Hybrid nanostructures, composed of multi-component crystals of various shapes, sizes and compositions are much sought-after functional materials. Pairing the ability to tune each material separately and controllably combine two (or more) domains with defined spatial orientation results in new properties. In this review, we discuss the various synthetic mechanisms for the formation of hybrid nanostructures of various complexities containing at least one metal/semiconductor interface, with a focus on colloidal chemistry. Different synthetic approaches, alongside the underlying kinetic and thermodynamic principles are discussed, and future advancement prospects are evaluated. Furthermore, the proved unique properties are reviewed with emphasis on the connection between the synthetic method and the resulting physical, chemical and optical properties with applications in fields such as photocatalysis.

A novel method for biosynthesis of different polymorphs of TiO2 nanoparticles as a protector for Bacillus thuringiensis from Ultra Violet

Bacillus thuringiensis (Bt) were used for biosynthesis of amorphous TiO2 converted to distinct polymorphs (anatase, rutile, mix) under different temperature conditions. Characterizations of TiO2 nanoparticles were performed by using X-ray diffraction spectroscopy (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and, energy-dispersive X-ray spectroscopy (EDX) analysis. Stability of five formulations under ultraviolet (UV) radiation with spore viability and mortality test on Ephestia kuehniella Zeller larvae were investigated. TiO2(mix) showed the highest viabilities of 79.76% after exposure to ultraviolet (UVA385 nm), while viabilities of non-protected spores under these conditions were 41.32%. The mortality of TiO2(mix), TiO2(anatase), TiO2(rutile), TiO2(amorphous) and free spore formulations on second-instar larvae of Ephestia kuehniella were 73.76%, 71.24%, 57.12%, 51.32%, and 50.32%, respectively on the 10th day of the experiment. The obtained results suggest that TiO2(amorphous) does not increase Bt resistance, but both phases of TiO2 nanoparticles synthesized (anatase and rutile) through the Bacillus thuringiensis and phase mixture can increase the persistence of Bt to the UV light. Furthermore, the combination of both crystalline phases of TiO2(mix) has the highest performance in improving the Bt resistance.

In situ self-assembling Au-DNA complexes for targeted cancer bioimaging and inhibition

Cancer remains one of the most challenging diseases to treat. For accurate cancer diagnosis and targeted therapy, it is important to assess the localization of the affected area of cancers. The general approaches for cancer diagnostics include pathological assessments and imaging. However, these methods only generally assess the tumor area. In this study, by taking advantage of the unique microenvironment of cancers, we effectively utilize in situ self-assembled biosynthetic fluorescent gold nanocluster-DNA (GNC-DNA) complexes to facilitate safe and targeted cancer theranostics. In in vitro and in vivo tumor models, our self-assembling biosynthetic approach allowed for precise bioimaging and inhibited cancer growth after one injection of DNA and gold precursors. These results demonstrate that in situ bioresponsive self-assembling GNC-PTEN (phosphatase and tensin homolog) complexes could be an effective noninvasive technique for accurate cancer bioimaging and treatment, thus providing a safe and promising cancer theranostics platform for cancer therapy.

Plasmon-Enhanced Deuteration under Visible-Light Irradiation

Deuteration has found important applications in synthetic chemistry especially for pharmaceutical developments. However, conventional deuteration methods using transition-metal catalysts or strong bases generally involve harsh reaction conditions, expensive deuterium source, insufficient efficiency, and poor selectivity. Herein, we report an efficient visible-light-driven dehalogenative deuteration of organic halides using plasmonic Au/CdS as photocatalyst and D₂O as deuterium donor. Electron transfer from Au to CdS, which has been confirmed by surface-enhanced Raman spectroscopy, plays a decisive role for the plasmon-mediated dehalogenation. The deuteration is revealed to proceed via a radical pathway in which substrates are first activated by the photoinduced electron transfer to generate aryl radicals, and the radicals are further trapped by D₂O to give deuterated products. Under visible-light irradiation, excellent deuteration efficiency is achieved with high functional group tolerance and a wide range of substrates at room temperature. Compared with bare CdS, the photocatalytic activity increases ∼18 times after the loading of plasmonic Au nanoparticles. This work sheds light on the interfacial charge transfer between plasmonic metals and semiconductors as an important criterion for rational design of visible-light photocatalysts.

Plasmon-promoted electrocatalytic water splitting on metal-semiconductor nanocomposites: the interfacial charge transfer and the real catalytic sites

The interfacial charge transfer and real catalytic sites on metal–semiconductor hybrid catalysts for photoelectrocatalytic water splitting are studied.

Plasmonic metal nanoparticles (NPs) have emerged as promising visible light harvesters to facilitate solar-to-chemical energy conversion via the generation of hot electrons by non-radiative decay of plasmons. As one of the most promising renewable energy production methods for the future, electrocatalytic water splitting is an ideal chemical reaction in which plasmonic NPs can be utilized for direct solar-to-fuel conversion. Due to the rapid carrier recombination on plasmonic NPs, hybrid photocatalysts integrating metals and semiconductors are usually employed to separate the hot electrons and holes. However, an understanding of the catalytic mechanism, which is critical for rational design of plasmonic electrocatalysts, including the interfacial charge transfer pathway and real reactive sites, has been lacking. Herein, we report on the combination of plasmonic Au NPs and semiconductors (Ni and/or Co hydroxides) for plasmon-promoted electrocatalytic water splitting. By using surface-enhanced Raman spectroscopy (SERS), we find a strong spontaneous interfacial charge transfer between Au and NiCo layered double hydroxide (LDH), which facilitates both the oxygen and hydrogen evolution reactions. The real catalytic sites on the hybrid material are confirmed by selective blocking of the metal surface with a thiol molecular monolayer. It is found that the plasmon-promoted oxygen evolution occurs on the LDH semiconductor but surprisingly, the hydrogen evolution sites are mainly located on the Au NP surface. This work demonstrates the critical role of interfacial charge transfer in hot electron-driven water splitting and paves the way for rational design of high-performance plasmonic electrocatalysts.

Core-Shell Gold Nanorod@Layered Double Hydroxide Nanomaterial with Highly Efficient Photothermal Conversion and Its Application in Antibacterial and Tumor Therapy

Photothermal conversion efficiency (η) of gold nanorods (GNRs) can be tuned by enlarging the aspect ratio and forming the core-shell structure. Herein, an easy synthesis method is developed to construct the core-shell GNR@LDH nanostructure with GNRs and layered double hydroxides (LDHs). The interaction between Au and LDHs results some electron deficiency on the surface of Au and the more electrons induce more thermal energy conversion. The η value of GNR@LDH can reach up to 60% under the 808 nm laser irradiation, which is a significant enhanced conversion efficiency compared with the reported GNR-based photothermal therapy materials. CTAB (cetyltrimethyl ammonium bromide) can be replaced totally during the synthesis process, and GNRs maintain a good dispersion in LDHs. This core-shell composite GNR@LDH can be applied in photothermal, antibacterial, tumor therapy and biological imaging with low dosage and nontoxicity.

Enhancing hot electron generation and injection in the near infrared via rational design and controlled synthesis of TiO2-gold nanostructures

Plasmonic nanostructure/semiconductor composites are receiving great interest as powerful photocatalytic platforms able to increase solar energy conversion efficiency compared to more traditional approaches. The possibility to grow a thin titania shell onto the gold nanoparticle, thus substantially increasing the metal-semiconductor area of contact, is expected to be ideal for photocatalytic water reduction, especially if the titania (TiO2) coating displays limited thickness and high crystallinity. We argue however that the morphology of the underlying gold nanoparticle and the quality of the interface are the main drivers of photocatalytic performance. Herein, we show how we can synthesize TiO2-coated gold nanostar- and gold nanorod-based photocatalysts and identify the most important design parameters that one should be focusing on for the optimization of hot electron-based photocatalysts. In addition to nanoparticle morphology and interface quality, we determine that the integrated absorptivity of the plasmon band and the uniformity and crystallinity of the semiconductor shell are important, even though to a lesser extent. These results may prove interesting not only to increase production rates in hydrogen evolution reactions or other chemical conversions, but also to decouple and understand additional mechanisms driving photocatalysis, other than the sequential, hot electron mediated one, as we reported before.

Bi-metal-organic frameworks type II heterostructures for enhanced photocatalytic styrene oxidation

Fabricating heterostructures enhances the photocatalytic performance of metal-organic frameworks (MOFs) due to their excellent light absorption and high efficient charge transfer capacity. In this study, we designed and implemented three-dimensional dendritic UiO-66-NH2@MIL-101(Fe) (UOML) heterostructures as catalysts for photocatalytic styrene oxidation. The UOML catalysts exhibited a well-matched band gap structure and efficient catalytic interface, leading to a remarkable photoexcited carrier separation and catalytic activity. Our results present a promising insight for synthesizing novel MOFs-based catalysts and their applications.