Progress toward Commercial Application of Electrochemical Carbon Dioxide Reduction

Selectivity of a Copper Oxide CO2 Reduction Electrocatalyst Shifted by a Bioinspired pH-Sensitive Polymer

A bioinspired polymeric membrane capable of shifting the selectivity of a copper oxide electrocatalyst in the CO2 reduction reaction is described. The membrane is deposited on top of copper oxide thin films from wet deposition techniques under controlled conditions of humidity and self-assembles into an arranged network of micrometer-sized pores throughout the polymer cross-section. The membrane was composed of a block copolymer with a precisely controlled ratio of poly-4-vinylpyridine and poly(methyl methacrylate) blocks (PMMA-b-P4VP). The intrinsic hydrophobicity, together with the porous nature of the membrane's surface, induces a Cassie-Baxter wetting transition above neutral pH, resulting in water repulsion from the catalyst surface. As a consequence, the catalyst's surface is shielded from surrounding water molecules under CO2 electroreduction reaction conditions, and CO2 molecules are preferentially located in the vicinity of the catalytically active area. The CO2 reduction reaction is therefore kinetically favored over the hydrogen evolution reaction (HER).

Turning copper into an efficient and stable CO evolution catalyst beyond noble metals

Using renewable electricity to convert CO2 into CO offers a sustainable route to produce a versatile intermediate to synthesize various chemicals and fuels. For economic CO2-to-CO conversion at scale, however, there exists a trade-off between selectivity and activity, necessitating the delicate design of efficient catalysts to hit the sweet spot. We demonstrate here that copper co-alloyed with isolated antimony and palladium atoms can efficiently activate and convert CO2 molecules into CO. This trimetallic single-atom alloy catalyst (Cu92Sb5Pd3) achieves an outstanding CO selectivity of 100% (±1.5%) at -402 mA cm-2 and a high activity up to -1 A cm-2 in a neutral electrolyte, surpassing numerous state-of-the-art noble metal catalysts. Moreover, it exhibits long-term stability over 528 h at -100 mA cm-2 with an FECO above 95%. Operando spectroscopy and theoretical simulation provide explicit evidence for the charge redistribution between Sb/Pd additions and Cu base, demonstrating that Sb and Pd single atoms synergistically shift the electronic structure of Cu for CO production and suppress hydrogen evolution. Additionally, the collaborative interactions enhance the overall stability of the catalyst. These results showcase that Sb/Pd-doped Cu can steadily carry out efficient CO2 electrolysis under mild conditions, challenging the monopoly of noble metals in large-scale CO2-to-CO conversion.

The spin polarization strategy regulates heterogeneous catalytic activity performance: from fundamentals to applications

In recent years, there has been significant attention towards the development of catalysts that exhibit superior performance and environmentally friendly attributes. This surge in interest is driven by the growing demands for energy utilization and storage as well as environmental preservation. Spin polarization plays a crucial role in catalyst design, comprehension of catalytic mechanisms, and reaction control, offering novel insights for the design of highly efficient catalysts. However, there are still some significant research gaps in the current study of spin catalysis. Therefore, it is urgent to understand how spin polarization impacts catalytic reactions to develop superior performance catalysts. Herein, we present a comprehensive summary of the application of spin polarization in catalysis. Firstly, we summarize the fundamental mechanism of spin polarization in catalytic reactions from two aspects of kinetics and thermodynamics. Additionally, we review the regulation mechanism of spin polarization in various catalytic applications and several approaches to modulate spin polarization. Moreover, we discuss the future development of spin polarization in catalysis and propose several potential avenues for further progress. We aim to improve current catalytic systems through implementing a novel and distinctive spin engineering strategy.

Regulating Spin Density using TEMPOL Molecules for Enhanced CO2-to-Ethylene Conversion by HKUST-1 Framework Derived Electrocatalysts

The selectivity of multicarbon products in the CO2 reduction reaction (CO2RR) depends on the spin alignment of neighboring active sites, which requires a spin catalyst that facilitates electron transfer with antiparallel spins for enhanced C-C coupling. Here, we design a radical-contained spin catalyst (TEMPOL@HKUST-1) to enhance CO2-to-ethylene conversion, in which spin-disordered (SDO) and spin-ordered (SO) phases co-exist to construct an asymmetric spin configuration of neighboring active sites. The replacement of axially coordinated H2O molecules with TEMPOL radicals introduces spin-spin interactions among the Cu(II) centers to form localized SO phases within the original H2O-mediated SDO phases. Therefore, TEMPOL@HKUST-1 derived catalyst exhibited an approximately two-fold enhancement in ethylene selectivity during the CO2RR at -1.8 V versus Ag/AgCl compared to pristine HKUST-1. In situ ATR-SEIRAS spectra indicate that the spin configuration at asymmetric SO/SDO sites significantly reduces the kinetic barrier for *CO intermediate dimerization toward the ethylene product. The performance of the spin catalyst is further improved by spin alignment under a magnetic field, resulting in a maximum ethylene selectivity of more than 50 %. The exploration of the spin-polarized kinetics of the CO2RR provides a promising path for the development of novel spin electrocatalysts with superior performance.

Tuning CuMgAl-Layered Double Hydroxide Nanostructures to Achieve CH4 and C2+ Product Selectivity in CO2 Electroreduction

Electrochemical CO2 reduction reaction (eCO2RR) over Cu-based catalysts is a promising approach for efficiently converting CO2 into value-added chemicals and alternative fuels. However, achieving controllable product selectivity from eCO2RR remains challenging because of the difficulty in controlling the oxidation states of Cu against robust structural reconstructions during the eCO2RR. Herein, we report a novel strategy for tuning the oxidation states of Cu species and achieving eCO2RR product selectivity by adjusting the Cu content in CuMgAl-layered double hydroxide (LDH)-based catalysts. In this strategy, the highly stable Cu2+ species in low-Cu-containing LDHs facilitated the strong adsorption of *CO intermediates and further hydrogenation into CH4. Conversely, the mixed Cu0/Cu+ species in high-Cu-containing LDHs derived from the electroreduction during the eCO2RR accelerated C-C coupling reactions. This strategy to regulate Cu oxidation states using LDH nanostructures with low and high Cu molar ratios produced an excellent eCO2RR performance for CH4 and C2+ products, respectively.

First-Principles Insights into the Selectivity of CO2 Electroreduction over Heterogeneous Single-Atom Catalysts

Heterogeneous metal-nitrogen-carbon (M-N-C) single-atom catalysts (SACs) have garnered considerable attention in the two-electron CO2 reduction reaction (2e-CO2RR). Interestingly, almost M-N-C SACs mainly produce CO, while Sb is one of the few SACs reported so far that can produce HCOOH. Nevertheless, the underlying factors for different selectivities on Sb-N-C SAC remain controversial, and the lack of in-depth understanding of limiting factors hampers further regulations. Here, by using constant-potential first-principles calculations, we revealed that the high HCOOH selectivity of Sb-N-C SAC is mainly attributed to their weak charge accumulation ability. Remarkably, considering the highly tunable geometric structure of M-N-C SACs, we provide that Sb-N-C SAC with the SbN3S1 center is a promising candidate for CO production. Our work provides the mechanism insight into 2e-CO2RR selectivity and further paves the way toward electrocatalyst regulation and design.

Easily constructed porous silver films for efficient catalytic CO2 reduction and Zn-CO2 batteries

For the electroreduction of carbon dioxide into high value-added chemicals, highly active and selective catalysts are crucial, and metallic silver is one of the most intriguing candidate materials available at a reasonable cost. Herein, through a novel two-step operation of Ag paste/SBA-15 coating and HF etching, porous silver films on a commercial carbon paper with a waterproofer (p-Ag/CP) could be easily fabricated on a large scale as highly efficient carbon dioxide reduction reaction (CO2RR) electrocatalysts with a CO Faraday efficiency (FECO) as high as 96.7% at -1.0 V vs. the reversible hydrogen electrode (RHE), and it still reaches up to 90% FECO over applied potentials ranging from -0.8 to -1.1 V vs. the RHE. Meanwhile, the membrane electrode assembly (MEA) utilizing the p-Ag/CP catalyst has achieved a current density, FECO, and stability of ∼60 mA cm-2, >91%, and 11 h, respectively. Furthermore, the assembled aqueous Zn-CO2 battery using p-Ag/CP cathode yielded a peak power density of 0.34 mW cm-2, 75 charge-discharge cycles for 25 h, and 64% FECO at 2.5 mA cm-2. Compared with flat Ag/CP, the significant enhancement in the CO2RR activity of p-Ag/CP was mainly attributed to the distinctive porous structure and an improved three-phase boundary, which is capable of inducing the stabilization of *COOH intermediates, increased active specific surface areas, fast electron transfer kinetic and mass transportation. Further, theoretical calculations revealed that p-Ag/CP possessed an optimized energy barrier for *COOH intermediates.

Enhancing C2+ product selectivity in CO2 electroreduction by enriching intermediates over carbon-based nanoreactors

Electrochemical CO2 reduction reaction (CO2RR) to multicarbon (C2+) products faces challenges of unsatisfactory selectivity and stability. Guided by finite element method (FEM) simulation, a nanoreactor with cavity structure can facilitate C-C coupling by enriching *CO intermediates, thus enhancing the selectivity of C2+ products. We designed a stable carbon-based nanoreactor with cavity structure and Cu active sites. The unique geometric structure endows the carbon-based nanoreactor with a remarkable C2+ product faradaic efficiency (80.5%) and C2+-to-C1 selectivity (8.1) during the CO2 electroreduction. Furthermore, it shows that the carbon shell could efficiently stabilize and highly disperse the Cu active sites for above 20 hours of testing. A remarkable C2+ partial current density of-323 mA cm-2 was also achieved in a flow cell device. In situ Raman spectra and density functional theory (DFT) calculation studies validated that the *COatop intermediates are concentrated in the nanoreactor, which reduces the free energy of C-C coupling. This work unveiled a simple catalyst design strategy that would be applied to improve C2+ product selectivity and stability by rationalizing the geometric structures and components of catalysts.

Advances and challenges in the electrochemical reduction of carbon dioxide

The electrocatalytic carbon dioxide reduction reaction (ECO2RR) is a promising way to realize the transformation of waste into valuable material, which can not only meet the environmental goal of reducing carbon emissions, but also obtain clean energy and valuable industrial products simultaneously. Herein, we first introduce the complex CO2RR mechanisms based on the number of carbons in the product. Since the coupling of C-C bonds is unanimously recognized as the key mechanism step in the ECO2RR for the generation of high-value products, the structural-activity relationship of electrocatalysts is systematically reviewed. Next, we comprehensively classify the latest developments, both experimental and theoretical, in different categories of cutting-edge electrocatalysts and provide theoretical insights on various aspects. Finally, challenges are discussed from the perspectives of both materials and devices to inspire researchers to promote the industrial application of the ECO2RR at the earliest.

Revealing the synergistic effect of Ni single atoms and adjacent 3d metal doped Ni nanoparticles in electrocatalytic CO2 reduction

Herein, we report the successful fabrication of a series of transition metal doped Ni nanoparticles (NPs) coordinated with Ni single atoms in nitrogen-doped carbon nanotubes (denoted as Ni1+NPsM-NCNTs, M = Mn, Fe, Co, Cu and Zn; Ni1 = Ni single atom). X-ray absorption fine structure reveals the coexistence of Ni single atoms with Ni-N4 coordination and NiM NPs. When applied for electrocatalytic CO2RR, the Ni1+NPsM-NCNT compounds show the Faradaic efficiency of CO (FECO) with a volcano-like tendency of Mn < Fe ≈ Co < Zn < Cu, in which the Ni1+NPsCu-NCNT exhibits the highest FECO of 96.92%, a current density of 171.25 mA cm-2 and a sustainable stability over 24 hours at a current density of 100 mA cm-2, outperforming most reported examples in the literature. Detailed experiments and theoretical calculations reveal that for Ni1+NPsCu-NCNTs, the electron transfer from NiCu NPs to Ni single atoms strengthens the adsorption of *COOH intermediates. Moreover, the d-band center of Ni-N in Ni1+NPsCu-NCNT is upshifted, providing stronger binding with the reaction intermediates of *COOH, whereas the NiCu NPs increase the Gibbs free energy change of the Volmer step, suppressing the competitive HER.

Introduction of a Conductive Layer into Flood-Resistant Gas Diffusion Electrodes with Polymer Substrate for an Efficient Electrochemical CO2 Reduction with Copper Oxide

Conversion of atmospheric carbon dioxide (CO2) into valuable feedstocks is a crucial technology, and electrochemical reduction of CO2 is a promising approach that can provide a useful source of ethylene (C2H4). Gas diffusion electrodes (GDEs) placed at the interface of the CO2 gas and electrolyte can achieve high current density through a sufficient supply of dissolved CO2 to the reaction site, making them indispensable in industrial applications. However, conventional GDEs with carbon substrate have suffered from electrolyte flooding and consequent loss of efficiency, posing an obstacle for practical application. While flood-resistant GDEs with hydrophobic polymer substrate have been proposed recently, only conductive materials can be employed as electrocatalysts because of their insulative properties, despite the high activities of oxide materials such as copper oxide. Here, we introduce an aluminum conductive layer in GDE with polymer substrate to enable the use of electrically resistive catalysts. Cuprous oxide (Cu2O) with silver particles was tested as a model material and has shown prolonged stability (>17 h) with high C2H4 Faraday efficiency (>50%) while suppressing flooding. A thorough characterization revealed that the conductive layer makes Cu2O an efficient electrocatalyst, even on the polymer substrate, by providing sufficient electrons through its conduction path. This research significantly expands the scope of electrode design by enabling the incorporation of a wide range of nonelectrically conductive materials on GDEs with polymer substrate.

Electronic Structure Design of Transition Metal-Based Catalysts for Electrochemical Carbon Dioxide Reduction

With the increasingly serious greenhouse effect, the electrochemical carbon dioxide reduction reaction (CO2RR) has garnered widespread attention as it is capable of leveraging renewable energy to convert CO2 into value-added chemicals and fuels. However, the performance of CO2RR can hardly meet expectations because of the diverse intermediates and complicated reaction processes, necessitating the exploitation of highly efficient catalysts. In recent years, with advanced characterization technologies and theoretical simulations, the exploration of catalytic mechanisms has gradually deepened into the electronic structure of catalysts and their interactions with intermediates, which serve as a bridge to facilitate the deeper comprehension of structure-performance relationships. Transition metal-based catalysts (TMCs), extensively applied in electrochemical CO2RR, demonstrate substantial potential for further electronic structure modulation, given their abundance of d electrons. Herein, we discuss the representative feasible strategies to modulate the electronic structure of catalysts, including doping, vacancy, alloying, heterostructure, strain, and phase engineering. These approaches profoundly alter the inherent properties of TMCs and their interaction with intermediates, thereby greatly affecting the reaction rate and pathway of CO2RR. It is believed that the rational electronic structure design and modulation can fundamentally provide viable directions and strategies for the development of advanced catalysts toward efficient electrochemical conversion of CO2 and many other small molecules.

Electrocatalytic Reduction of CO2 to CO by Molecular Cobalt-Polypyridine Diamine Complexes

Cobalt complexes have previously been reported to exhibit high faradaic efficiency in reducing CO2 to CO. Herein, we synthesized capsule-like cobalt-polypyridine diamine complexes [Co(L1)](BF4)2 (1) and [Co(L2) (CH3CN)](BF4)2 (2) as catalysts for the electrocatalytic reduction of CO2. Under catalytic conditions, complexes 1 and 2 demonstrated the electrocatalytic reduction of CO2 to CO in the presence or absence of CH3OH as a proton source. Experimental and computational studies revealed that complexes 1 and 2 undergo two consecutive reversible one-electron reductions on the cobalt core, followed by the addition of CO2 to form a metallocarboxylate intermediate [CoII(L)-CO22-]0. This crucial reaction intermediate, which governs the catalytic cycle, was successfully detected using high resolution mass spectrometry (HRMS). In situ Fourier-transform infrared spectrometer (FTIR) analysis showed that methanol can enhance the rate of carbon-oxygen bond cleavage of the metallocarboxylate intermediate. DFT studies on [CoII(L)-CO22-]0 have suggested that the doubly reduced species attacks CO2 on the C atom through the dz2 orbital, while the interaction with CO2 is further stabilized by the π interaction between the metal dxz or dxz orbital with p orbitals on the O atoms. Further reductions generate a metal carbonyl intermediate [CoI(L)-CO]+, which ultimately releases CO.

Constructing Gold Single-Atom Catalysts on Hierarchical Nitrogen-Doped Carbon Nanocages for Carbon Dioxide Electroreduction to Syngas

Precious-metal single-atom catalysts (SACs), featured by high metal utilization and unique coordination structure for catalysis, demonstrate distinctive performances in the fields of heterogeneous and electrochemical catalysis. Herein, gold SACs are constructed on hierarchical nitrogen-doped carbon nanocages (hNCNC) via a simple impregnation-drying process and first exploited for electrocatalytic carbon dioxide reduction reaction (CO2RR) to produce syngas. The as-constructed Au SAC exhibits the high mass activity of 3319 A g-1 Au at -1.0 V (vs reversible hydrogen electrode, RHE), much superior to the Au nanoparticles supported on hNCNC. The ratio of H2/CO can be conveniently regulated in the range of 0.4-2.2 by changing the applied potential. Theoretical study indicates such a potential-dependent H2/CO ratio is attributed to the different responses of HER and CO2RR on Au single-atom sites coordinating with one N atom at the edges of micropores across the nanocage shells. The catalytic mechanism of the Au active sites is associated with the smooth switch between twofold and fourfold coordination during CO2RR, which much decreases the free energy changes of the rate-determining steps and promotes the reaction activity.

Electrochemical Conversion of CO2 into Formate Boosted by In Situ Reconstruction of Bi-MOF to Bi2O2CO3 Ultrathin Nanosheets

Substantial emissions of CO2 have presented formidable challenges for global climate dynamics. Electrochemical reduction of CO2 to produce formic acid (HCOOH) is considered to be a promising approach for achieving carbon neutrality. Nevertheless, the development of a catalyst exhibiting both high catalytic activity and selectivity toward desired products remains an arduous task. Herein, we report the synthesis of a unique porous bismuth-based MOF (Bi-BTC) through microwave-assisted agitation. The Bi-BTC MOF has a good catalytic performance in electrochemical CO2RR to formate products. At -0.9 V (vs RHE) potential, the Faradaic efficiency of formate can reach 96%, and the current density of the CO2RR is 25 mA/cm2. Bi-BTC also exhibits good electrochemical stability. FEformate and current density were maintained for 24 h with almost no attenuation. It was found that Bi-BTC was reconstructed in the CO2RR process. The shape of nanocolumn before electrolysis is transformed into an ultrathin nanosheet. The soft and hard acid-base theory (HSAB) proves that the reason for the reconfiguration is that the hard base ions (HCO3-) and the intermediate acid (Bi3+) break in the Bi-O bond in Bi-MOF, resulting in the transition of the original column structure of Bi-BTC to Bi2O2CO3 ultrathin nanosheeets. The DFT calculation shows that the restructured Bi2O2CO3 nanosheet exposes a crystal surface structure, which is conducive to lower the activation energy barrier of the electrochemical CO2RR intermediate *OCHO and stabilizing the reaction intermediate. Therefore, it is more beneficial to improve the selectivity of the electrochemical CO2RR to formate formation. This result proves that irreversible reconfiguration of catalyst is beneficial to electrochemical CO2RR. In addition, coupling a Bi-BTC cathode with a stable anode (IrO2) enables battery-driven high-activity CO2RR and an OER with good activity and efficiency.

ClAg14 (C≡Ct Bu)12 Nanoclusters as Efficient and Selective Electrocatalysts Toward Industrially Relevant CO2 Conversion

Atomically precise metal nanoclusters (NCs) have emerged as a promising frontier in the field of electrochemical CO2 reduction reactions (CO2 RR) because of their distinctive catalytic properties. Although numerous metal NCs are developed for CO2 RR, their use in practical applications has suffered from their low-yield synthesis and insufficient catalytic activity. In this study, the large-scale synthesis and electrocatalytic performance of ClAg14 (C≡Ct Bu)12 + NCs, which exhibit remarkable efficiency in catalyzing CO2 -to-CO electroreduction with a CO selectivity of over 99% are reported. The underlying mechanisms behind this extraordinary CO2 RR activity of ClAg14 (C≡Ct Bu)12 + NCs are investigated by a combination of electrokinetic and theoretical studies. These analyses reveal that different active sites, generated through electrochemical activation, have unique adsorption properties for the reaction intermediates, leading to enhanced CO2 RR and suppressed hydrogen production. Furthermore, industrially relevant CO2 -to-CO electroreduction using ClAg14 (C≡Ct Bu)12 + NCs in a zero-gap CO2 electrolyzer, achieving high energy efficiency of 51% and catalyst activity of over 1400 A g-1 at a current density of 400 mA cm-2 is demonstrated.

Theoretical Investigation of the BCN Monolayer and Their Derivatives for Metal-free CO2 Photocatalysis, Capture, and Utilization

In recent years, carbon capture and utilization (CCU) has been explored as an attractive solution to global warming, which is mainly caused by increasing CO2 emission levels. Many functional materials have been developed for removing atmospheric CO2 and converting it to more useful forms of carbon. Traditional metallic photocatalytic species have drawbacks-photocorrosion, low visible-light absorbance, and environmental damage; therefore, metal-free materials have attracted considerable research attention. In particular, boron nitride (BN) possesses unique B-N bonds, characterized by a large difference in the electronegativity of atoms that facilitates CO2 reduction, and catalytic CO2 reduction by boron carbon nitride (BCN) has been demonstrated under visible light; hence, these two materials can be considered potential CO2 reduction photocatalysts. However, further modification of the materials and their applicability to other CCU applications have not been extensively explored. Therefore, we decided to investigate the modification of BCN monolayers, with the aim of ensuring that the properties of the materials are better suited, first, to the requirements of CO2 photocatalysis, and second, to those of carbon capture or other optoelectronic applications. In this study, we considered various novel BCN monolayers, based on modification via metal-free substitutional doping and nitrogen vacancy creation, and performed first-principles density functional theory calculations. The effects of the modifications on band gap tuning, charge transfer, and the CO2 adsorption ability were all studied. Specifically, ON-B13C8N11 and SiC-2 × 2-BC6N were shown to possess excellent properties for photocatalytic CO2 reduction, and OC-2 × 2-BC6N and Nv-4 × 4-BN can be considered for future CO2 capture materials. These results contribute to existing CCU approaches, suggesting that BCN monolayer modification merits further investigation, and offering insights relevant to other photocatalytic applications.

Bioinspired motifs in proton and CO2 reduction with 3d-metal polypyridine complexes

The synthesis of active and efficient catalysts for solar fuel generation is nowadays of high relevance for the scientific community, but at the same time poses great challenges. Critical requirements are mainly associated with the kinetic barriers due to the multi-proton and multi-electron nature of the hydrogen evolution reaction (HER) and the CO2 reduction reaction (CO2RR) as well as to selectivity issues. In this regard, natural enzymes can be a source of inspiration for the design of effective and selective catalysts to target such fundamental reactions. In this Feature Article we review some recent works on molecular catalysts for both the HER and the CO2RR performed in our labs and other research teams which mainly address (i) the role of redox non-innocent ligands, to lower the overpotential for catalysis and control the selectivity, and (ii) the role of internal relays, to assist formation of catalytic intermediates via intramolecular routes. The selected exemplars have been chosen to emphasize that, although the molecular structures and the synthetic motifs are different from those of the active sites of natural enzymes, many affinities in terms of catalytic mechanism and functionality are instead present, which account for the observed remarkable performances under operative conditions. The data discussed herein thus demonstrate the great potential and the privileged role of molecular catalysts towards the design and construction of hybrid photochemical systems for solar energy conversion into fuels.

Effect of Feature Shape and Dimension of a Confinement Geometry on Selectivity of Electrocatalytic CO2 Reduction

The local confinement effect, which can generate a high concentration of hydroxide ions and reaction intermediates near the catalyst surface, is an important strategy for converting CO2 into multi-carbon products in electrocatalytic CO2 reduction. Therefore, understanding how the shape and dimension of the confinement geometry affect the product selectivity is crucial. In this study, we report for the first time the effect of the shape (degree of confinement) and dimension of the confined space on the product selectivity without changing the intrinsic property of Cu. We demonstrate that geometry influences the outcomes of products, such as CH4 , C2 H4 , and EtOH, in different ways: the selectivity of CH4 and EtOH is affected by shape, while the selectivity of C2 H4 is influenced by dimension of geometry predominantly. These phenomena are demonstrated, both experimentally and through simulation, to be induced by the local confinement effect within the confined structure. Our geometry model could serve as basis for designing the confined structures tailored for the production of specific products.

Boron-Doped Nickel-Nitrogen-Carbon Single-Atom Catalyst for Boosting Electrochemical CO2 Reduction

Tuning the coordination environment of the metal center in metal-nitrogen-carbon (M-N-C) single-atom catalysts via heteroatom-doping (oxygen, phosphorus, sulfur, etc.) is effective for promoting electrocatalytic CO2 reduction reaction (CO2 RR). However, few studies are investigated establishing efficient CO2 reduction by introducing boron (B) atoms to regulate the M-N-C structure. Herein, a B-C3 N4 self-sacrifice strategy is developed to synthesize B, N co-coordinated Ni single atom catalyst (Ni-BNC). X-ray absorption spectroscopy and high-angle annular dark field scanning transmission electron microscopy confirm the structure (Ni-N3 B/C). The Ni-BNC catalyst presents a maximum CO Faradaic efficiency (FECO ) of 98.8% and a large CO current density (jCO ) of -62.9 mA cm-2 at -0.75 and -1.05 V versus reversible hydrogen electrode, respectively. Furthermore, FECO could be maintained above 95% in a wide range of potential windows from -0.65 to -1.05 V. In situ experiments and density functional theory calculations demonstrate the Ni-BNC catalyst with B atoms coordinated to the central Ni atoms could significantly reduce the energy barrier for the conversion of *CO2 to *COOH, leading to excellent CO2 RR performance.

Ultrafast Thermal Shock Synthesis and Porosity Engineering of 3D Hierarchical Cu-Bi Nanofoam Electrodes for Highly Selective Electrochemical CO2 Reduction

Massive production of practical metal or alloy based electrocatalysts for electrocatalytic CO2 reduction reaction is usually limited by energy-extensive consumption, poor reproducibility, and weak adhesion on electrode substrates. Herein, we report the ultrafast thermal shock synthesis and porosity engineering of free-standing Cu-Bi bimetallic nanofoam electrocatalysts with 3D hierarchical porous structure and easily adjustable compositions. During the thermal shock process, the rapid heating and cooling steps in several seconds result in strong interaction between metal nanopowders to form multiphase nanocrystallines with abundant grain boundaries and metastable CuBi intermetallic phase. The subsequent porosity engineering process via acid etching and electroreduction creates highly porous Cu-Bi structures that can increase electrochemically active surface area and facilitate mass/charge transfer. Among the Cu-Bi nanofoam electrodes with different Cu/Bi ratios, the Cu4Bi nanofoam exhibited the highest formate selectivity with a Faradaic efficiency of 92.4% at -0.9 V (vs reversible hydrogen electrode) and demonstrated excellent operation stability.

Highly Stable Layered Coordination Polymer Electrocatalyst toward Efficient CO2 -to-CH4 Conversion

Cu2+ -based materials, a class of promising catalysts for the electrocatalytic carbon dioxide reduction reaction (CO2 RR) to value-added chemicals, usually undergo inevitable and uncontrollable reorganization processes during the reaction, resulting in catalyst deactivation or the new active sites formation and bringing great challenges to exploring their structure-performance relationships. Herein, a facile strategy is reported for constructing Cu2+ and 3, 4-ethylenedioxythiophene (EDOT) coordination to stabilize Cu2+ ions to prepare a novel layered coordination polymer (CuPEDOT). CuPEDOT enables selective reduction of CO2 to CH4 with 62.7% Faradaic efficiency at the current density of 354 mA cm-2 in a flow cell, and the catalyst is stable for at least 15 h. In situ spectroscopic characterization and theoretical calculations reveal that CuPEDOT catalyst can maintain the Cu2+ -EDOT coordination structurally stable in CO2 RR and significantly promote the further hydrogenation of *CO intermediates, favoring the formation of CH4 instead of dimerization to C2 products. The strong coordination between EDOT and Cu2+ prevents the reduction of Cu2+ ions during CO2 RR. The finding of this work provides a new perspective on designing molecularly stable, highly active catalysts for CO2 RR.

Breaking Scaling Relations for Highly Efficient Electroreduction of CO2 to CO on Atomically Dispersed Heteronuclear Dual-Atom Catalyst

Conversion of CO2 into value-added products by electrocatalysis provides a promising way to mitigate energy and environmental problems. However, it is greatly limited by the scaling relationship between the adsorption strength of intermediates. Herein, Mn and Ni single-atom catalysts, homonuclear dual-atom catalysts (DACs), and heteronuclear DACs are synthesized. Aberration-corrected annular dark-field scanning transmission electron microscopy (ADF-STEM) and X-ray absorption spectroscopy characterization uncovered the existence of the Mn─Ni pair in Mn─Ni DAC. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy reveal that Mn donated electrons to Ni atoms in Mn─Ni DAC. Consequently, Mn─Ni DAC displays the highest CO Faradaic efficiency of 98.7% at -0.7 V versus reversible hydrogen electrode (vs RHE) with CO partial current density of 16.8 mA cm-2 . Density functional theory calculations disclose that the scaling relationship between the binding strength of intermediates is broken, resulting in superior performance for ECR to CO over Mn─Ni─NC catalyst.

Continuous electroproduction of formate via CO2 reduction on local symmetry-broken single-atom catalysts

Atomic-level coordination engineering is an efficient strategy for tuning the catalytic performance of single-atom catalysts (SACs). However, their rational design has so far been plagued by the lack of a universal correlation between the coordination symmetry and catalytic properties. Herein, we synthesised planar-symmetry-broken CuN3 (PSB-CuN3) SACs through microwave heating for electrocatalytic CO2 reduction. Remarkably, the as-prepared catalysts exhibited a selectivity of 94.3% towards formate at -0.73 V vs. RHE, surpassing the symmetrical CuN4 catalyst (72.4% at -0.93 V vs. RHE). In a flow cell equipped with a PSB-CuN3 electrode, over 90% formate selectivity was maintained at an average current density of 94.4 mA cm-2 during 100 h operation. By combining definitive structural identification with operando X-ray spectroscopy and theoretical calculations, we revealed that the intrinsic local symmetry breaking from planar D4h configuration induces an unconventional dsp hybridisation, and thus a strong correlation between the catalytic activity and microenvironment of metal centre (i.e., coordination number and distortion), with high preference for formate production in CuN3 moiety. The finding opens an avenue for designing efficient SACs with specific local symmetries for selective electrocatalysis.

Atomic high-spin cobalt(II) center for highly selective electrochemical CO reduction to CH3OH

In this work, via engineering the conformation of cobalt active center in cobalt phthalocyanine molecular catalyst, the catalytic efficiency of electrochemical carbon monoxide reduction to methanol can be dramatically tuned. Based on a collection of experimental investigations and density functional theory calculations, it reveals that the electron rearrangement of the Co 3d orbitals of cobalt phthalocyanine from the low-spin state (S = 1/2) to the high-spin state (S = 3/2), induced by molecular conformation change, is responsible for the greatly enhanced CO reduction reaction performance. Operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements disclose accelerated hydrogenation of CORR intermediates, and kinetic isotope effect validates expedited proton-feeding rate over cobalt phthalocyanine with high-spin state. Further natural population analysis and density functional theory calculations demonstrate that the high spin Co2+ can enhance the electron backdonation via the dxz/dyz-2π* bond and weaken the C-O bonding in *CO, promoting hydrogenation of CORR intermediates.

Phase Interface Regulating on Amorphous/Crystalline Bismuth Catalyst for Boosted Electrocatalytic CO2 Reduction to Formate

Electroreduction of carbon dioxide into readily collectable and high-value carbon-based fuels is greatly significant to overcome the energy and environmental crises yet challenging in the development of robust and highly efficient electrocatalysts. Herein, a bismuth (Bi) heterophase electrode with enriched amorphous/crystalline interfaces was fabricated via cathodically in situ transformation of Bi-based metal-phenolic complexes (Bi-tannic acid, Bi-TA). Compared with amorphous or crystalline Bi catalyst, the amorphous/crystalline structure Bi leads to significantly enhanced performance for CO2 electroreduction. In a liquid-phase H-type cell, the Faraday efficiency (FE) of formate formation is over 90% in a wide potential range from -0.8 to -1.3 V, demonstrating a high selectivity toward formate. Moreover, in a flow cell, a large current density reaching 600 mA cm-2 can further be rendered for formate production. Theoretical calculations indicate that the amorphous/crystalline Bi heterophase interface exhibits a favorable adsorption of CO2 and lower energy barriers for the rate-determining step compared with the crystalline Bi counterparts, thus accelerating the reaction process. This work paves the way for the rational design of advanced heterointerface catalysts for CO2 reduction.

Perovskite-Derived Bismuth with I- and Cs+ Dual Modification for High-Efficiency CO2 -to-Formate Electrosynthesis and Al-CO2 Batteries

Bi-based materials are one of the most promising candidates for electrochemical CO2 reduction reaction (CO2 RR) to formate; however, the majority of them still suffer from low current density and stability that essentially constrain their potential applications at the industrial scale. Surface modification represents an effective approach to modulate the electrode microenvironment and the relative binding strength of key intermediates. Herein, it is demonstrated that the surface comodification with halides and alkali metal ions from the conversion of Bi-based halide perovskite nanocrystals is a viable strategy to boost the CO2 RR performance of Bi for formate electrosynthesis. Cs3 Bi2 I9 nanocrystals are prepared by a hot-injection method. The as-prepared products feature well-defined hexagonal shape and uniform size distribution. When used as the precatalyst, Cs3 Bi2 I9 nanocrystals are converted to Cs+ and I- comodified Bi. The resultant catalyst exhibits high formate Faradaic efficiency close to 100%, and remarkable partial current density up to 44 mA cm-2 in an H-cell and up to 276 mA cm-2 in a flow cell. Moreover, Cs3 Bi2 I9 is used as the cathode catalyst and paired with an Al anode in an Al-CO2 battery for simultaneous CO2 valorization and power generation.

Ultrastable Cu-Based Dual-Channel Heterowire for the Switchable Electro-/Photocatalytic Reduction of CO2

Catalytic conversion of CO2 into high value-added chemicals using renewable energy is an attractive strategy for the management of CO2 . However, achieving both efficiency and product selectivity remains a great challenge. Herein, a brand-new family of 1D dual-channel heterowires, Cu NWs@MOFs are constructed by coating metal-organic frameworks (MOFs) on Cu nanowires (Cu NWs) for electro-/photocatalytic CO2 reductions, where Cu NWs act as an electron channel to directionally transmit electrons, and the MOF cover acts as a molecule/photon channel to control the products and/or undertake photoelectric conversion. Through changing the type of MOF cover, the 1D heterowire is switched between electrocatalyst and photocatalyst for the reduction of CO2 with excellent selectivity, adjustable products, and the highest stability among the Cu-based CO2 RR catalysts, which leads to heterometallic MOF covered 1D composite, and especially the first 1D/1D-type Mott-Schottky heterojunction. Considering the diversity of MOF materials, the ultrastable heterowires offer a highly promising and feasible solution for CO2 reduction.

X-ray Tomography Applied to Electrochemical Devices and Electrocatalysis

X-ray computed tomography (CT) is a nondestructive three-dimensional (3D) imaging technique used for studying morphological properties of porous and nonporous materials. In the field of electrocatalysis, X-ray CT is mainly used to quantify the morphology of electrodes and extract information such as porosity, tortuosity, pore-size distribution, and other relevant properties. For electrochemical systems such as fuel cells, electrolyzers, and redox flow batteries, X-ray CT gives the ability to study evolution of critical features of interest in ex situ, in situ, and operando environments. These include catalyst degradation, interface evolution under real conditions, formation of new phases (water and oxygen), and dynamics of transport processes. These studies enable more efficient device and electrode designs that will ultimately contribute to widespread decarbonization efforts.

Dual-Gate Organic Thin-Film Transistor and Multiplexer Chips for the Next Generation of Flexible EG-ISFET Sensor Chips

Ion-sensitive field-effect transistors (ISFETs) are used as elementary devices to build many types of chemical sensors and biosensors. Organic thin-film transistor (OTFT) ISFETs use either small molecules or polymers as semiconductors together with an additive manufacturing process of much lower cost than standard silicon sensors and have the additional advantage of being environmentally friendly. OTFT ISFETs' drawbacks include limited sensitivity and higher variability. In this paper, we propose a novel design technique for integrating extended-gate OTFT ISFETs (OTFT EG-ISFETs) together with dual-gate OTFT multiplexers (MUXs) made in the same process. The achieved results show that our OTFT ISFET sensors are of the state of the art of the literature. Our microsystem architecture enables switching between the different ISFETs implemented in the chip. In the case of sensors with the same gain, we have a fault-tolerant architecture since we are able to replace the faulty sensor with a fault-free one on the chip. For a chip including sensors with different gains, an external processor can select the sensor with the required sensitivity.

Electrochemical Carbon Dioxide Reduction to Ethylene: From Mechanistic Understanding to Catalyst Surface Engineering

Electrochemical carbon dioxide reduction reaction (CO2RR) provides a promising way to convert CO2 to chemicals. The multicarbon (C2+) products, especially ethylene, are of great interest due to their versatile industrial applications. However, selectively reducing CO2 to ethylene is still challenging as the additional energy required for the C-C coupling step results in large overpotential and many competing products. Nonetheless, mechanistic understanding of the key steps and preferred reaction pathways/conditions, as well as rational design of novel catalysts for ethylene production have been regarded as promising approaches to achieving the highly efficient and selective CO2RR. In this review, we first illustrate the key steps for CO2RR to ethylene (e.g., CO2 adsorption/activation, formation of *CO intermediate, C-C coupling step), offering mechanistic understanding of CO2RR conversion to ethylene. Then the alternative reaction pathways and conditions for the formation of ethylene and competitive products (C1 and other C2+ products) are investigated, guiding the further design and development of preferred conditions for ethylene generation. Engineering strategies of Cu-based catalysts for CO2RR-ethylene are further summarized, and the correlations of reaction mechanism/pathways, engineering strategies and selectivity are elaborated. Finally, major challenges and perspectives in the research area of CO2RR are proposed for future development and practical applications.

Challenges for Hybrid Water Electrolysis to Replace the Oxygen Evolution Reaction on an Industrial Scale

To enable a future society based on sun and wind energy, transforming electricity into chemical energy in the form of fuels is crucial. This transformation can be achieved in an electrolyzer performing water splitting, where at the anode, water is oxidized to oxygen-oxygen evolution reaction (OER)-to produce protons and electrons that can be combined at the cathode to form hydrogen-hydrogen evolution reaction (HER). While hydrogen is a desired fuel, the obtained oxygen has no economic value. A techno-economically more suitable alternative is hybrid water electrolysis, where value-added oxidation reactions of abundant organic feedstocks replace the OER. However, tremendous challenges remain for the industrial-scale application of hybrid water electrolysis. Herein, these challenges, including the higher kinetic overpotentials of organic oxidation reactions compared to the OER, the small feedstock availably and product demand of these processes compared to the HER (and carbon dioxide reduction), additional purifications costs, and electrocatalytic challenges to meet the industrially required activities, selectivities, and especially long-term stabilities are critically discussed. It is anticipated that this perspective helps the academic research community to identify industrially relevant research questions concerning hybrid water electrolysis.

Indium Cyanamide for Industrial-Grade CO2 Electroreduction to Formic Acid

Developing industrial-grade electroreduction of CO2 to produce formate (HCOO-)/formic acid (HCOOH) depends on highly active electrocatalysts. However, structural changes due to the inevitable self-reduction of catalysts result in severe long-term stability issues at industrial-grade current density. Herein, linear cyanamide anion ([NCN]2-)-constructed indium cyanamide nanoparticles (InNCN) were investigated for CO2 reduction to HCOO- with a Faradaic efficiency of up to 96% under a partial current density (jformate) of 250 mA cm-2. Bulk electrolysis at a jformate of 400 mA cm-2 requires only -0.72 VRHE applied potential with iR correction. It also achieves continuous production of pure HCOOH at ∼125 mA cm-2 for 160 h. The excellent activity and stability of InNCN are attributed to its unique structural features, including strongly σ-donating [NCN]2- ligands, the potential structural transformation of [N═C═N]2- and [N≡C-N]2-, and the open framework structure. This study affirms metal cyanamides as promising novel materials for electrocatalytic CO2 reduction, broadening the variety of CO2 reduction catalysts and the understanding of structure-activity relationships.

Carbon black supported Ag nanoparticles in zero-gap CO2 electrolysis to CO enabling high mass activity

In this study Ag nanoparticles supported on carbon black (Ag/C) were studied as catalysts for the electrochemical reduction of CO₂ to CO. The nanoparticles were synthesized on three carbon supports, namely Super P, Vulcan and Ketjenblack with surface areas from 50 to 800 m² g^-1 using cysteamine as a linker as proposed by Kim et al., J. Am. Chem. Soc., 2015, 137, 13844. Gas diffusion electrodes were fabricated with all three Ag/Cs and then characterized in a zero-gap electrolyzer. All three supported catalysts achieve high voltage efficiencies, mass activities, and faradaic efficiencies above 80% up to 200 mA cm^-2 with Ag loadings of ∼0.07 mg cm^-2. Using an IrO₂ anode, a partial CO current density of 196 mA cm^-2 at 2.95 V and a mass activity of 3920 mA mg^-1 at a cell voltage of 3.2 V was achieved. When changing the electrolyte from 0.1 M KOH to 0.1 M CsOH, it is possible to achieve 90% FE_CO at 300 mA cm^-2. This results in a mass activity up to 5400 mA mg^-1. Moreover, long-term tests at 300 mA cm^-2 with 0.1 M CsOH resulted in FE_CO remaining above 80% over 11 h. The electrochemical performance did not show a dependence on the carbon support, indicating that mass transport is limiting the cathode, rather than catalyst kinetics. It is worth noting that this may only apply to electrodes with PTFE binders as used in this study, and electrodes with ionomer binders may show a dependence on the catalyst support.

Engineering iron carbide catalyst with aerophilic and electron-rich surface for improved electrochemical CO2 reduction

Highly efficient electrocatalyst for carbon dioxide reduction (CO₂RR) is desirable for converting CO₂ into carbon-based chemicals and reducing anthropogenic carbon emission. Regulating catalyst surface to improve the affinity for CO₂ and the capability of CO₂ activation is the key to high-efficiency CO₂RR. In this work, we develop an iron carbide catalyst encapsulated in nitrogenated carbon (SeN-Fe₃C) with an aerophilic and electron-rich surface by inducing preferential formation of pyridinic-N species and engineering more negatively charged Fe sites. The SeN-Fe₃C exhibits an excellent CO selectivity with a CO Faradaic efficiency (FE) of 92 % at -0.5 V (vs. RHE) and remarkably enhanced CO partial current density as compared to the N-Fe₃C catalyst. Our results demonstrate that Se doping reduces the Fe₃C particle size and improves the dispersion of Fe₃C on nitrogenated carbon. More importantly, the preferential formation of pyridinic-N species induced by Se doping endows the SeN-Fe₃C with an aerophilic surface and improves the affinity of the SeN-Fe₃C for CO₂. Density functional theory (DFT) calculations reveal that the electron-rich surface, which is caused by pyridinic N species and much more negatively charged Fe sites, leads to a high degree of polarization and activation of CO₂ molecule, thus conferring a remarkably improved CO₂RR activity on the SeN-Fe₃C catalyst.

Phase-Inversion Induced 3D Electrode for Direct Acidic Electroreduction CO2 to Formic acid

Direct electrochemical CO₂ reduction to formic acid (FA) instead of formate is a challenging task due to the high acidity of FA and competitive hydrogen evolution reaction. Herein, 3D porous electrode (TDPE) is prepared by a simple phase inversion method, which can electrochemically reduce CO₂ to FA in acidic conditions. Owing to interconnected channels, high porosity, and appropriate wettability, TDPE not only improves mass transport, but also realizes pH gradient to build higher local pH micro-environment under acidic conditions for CO₂ reduction compared with planar electrode and gas diffusion electrode. Kinetic isotopic effect experiments demonstrate that the proton transfer becomes the rate-determining step at the pH of 1.8; however, not significant in neutral solution, suggesting that the proton is aiding the overall kinetics. Maximum FA Faradaic efficiency of 89.2% has been reached at pH 2.7 in a flow cell, generating FA concentration of 0.1 m. Integrating catalyst and gas-liquid partition layer into a single electrode structure by phase inversion method paves a facile avenue for direct production of FA by electrochemical CO₂ reduction.

Pressure dependence in aqueous-based electrochemical CO2 reduction

Electrochemical CO₂ reduction (CO₂R) is an approach to closing the carbon cycle for chemical synthesis. To date, the field has focused on the electrolysis of ambient pressure CO₂. However, industrial CO₂ is pressurized-in capture, transport and storage-and is often in dissolved form. Here, we find that pressurization to 50 bar steers CO₂R pathways toward formate, something seen across widely-employed CO₂R catalysts. By developing operando methods compatible with high pressures, including quantitative operando Raman spectroscopy, we link the high formate selectivity to increased CO₂ coverage on the cathode surface. The interplay of theory and experiments validates the mechanism, and guides us to functionalize the surface of a Cu cathode with a proton-resistant layer to further the pressure-mediated selectivity effect. This work illustrates the value of industrial CO₂ sources as the starting feedstock for sustainable chemical synthesis.

Upcycling air pollutants to fuels and chemicals via electrochemical reduction technology

The intensification of fossil fuel usage results in significant air pollution levels. Efforts have been put into developing efficient technologies capable of converting air pollution into valuable products, including fuels and valuable chemicals (e.g., CO₂ to hydrocarbon and syngas and NO_x to ammonia). Among the strategic efforts to mitigate the excessive concentration of CO₂ and NO_x pollutants in the atmosphere, the electrochemical reduction technology of CO₂ (CO₂RR) and NO_x (NO_xRR) emerges as one of the most promising approaches. It is even more attractive if CO₂RR and NO_xRR are paired with renewables to store intermittent electricity in the form of chemical feedstocks. This review provides an overview of the electrochemical reduction process to convert CO₂ to C₁ and/or C₂₊ chemicals and NO_x to ammonia (NH₃) with a focus on electrocatalysts, electrolytes, electrolyzer, and catalytic reactor designs toward highly selective electrochemical conversion of the desired products. While the attempts in these aspects are enormous, economic consideration and environmental feasibility for actual implementation are not comprehensively provided. We discuss CO₂RR and NO_xRR from the life cycle and techno-economic analyses to perceive the feasibility of the current achievements. The remaining challenges associated with the industrial implementation of electrochemical CO₂ and NO_x reduction are additionally provided.

Revisiting the Role of Discharge Products in Li-CO2 Batteries

Rechargeable lithium-carbon dioxide (Li-CO2 ) batteries are promising devices for CO2 recycling and energy storage. However, thermodynamically stable and electrically insulating discharge products (DPs) (e.g., Li2 CO3 ) deposited at cathodes require rigorous conditions for completed decomposition, resulting in large recharge polarization and poor battery reversibility. Although progress has been achieved in cathode design and electrolyte optimization, the significance of DPs is generally underestimated. Therefore, it is necessary to revisit the role of DPs in Li-CO2 batteries to boost overall battery performance. Here, a critical and systematic review of DPs in Li-CO2 batteries is reported for the first time. Fundamentals of reactions for formation and decomposition of DPs are appraised; impacts on battery performance including overpotential, capacity, and stability are demonstrated; and the necessity of discharge product management is highlighted. Practical in situ/operando technologies are assessed to characterize reaction intermediates and the corresponding DPs for mechanism investigation. Additionally, achievable control measures to boost the decomposition of DPs are evidenced to provide battery design principles and improve the battery performance. Findings from this work will deepen the understanding of electrochemistry of Li-CO2 batteries and promote practical applications.

Stability of Photocathodes: A Review on Principles, Design, and Strategies

Photoelectrochemical devices based on semiconductor photoelectrode can directly convert and store solar energy into chemical fuels. Although the efficient photoelectrodes with commercially valuable solar-to-fuel energy conversion efficiency have been reported over past decades, one of the most enormous challenges is the stability of the photoelectrode due to corrosion during operation. Thus, it is of paramount importance for developing a stable photoelectrode to deploy solar-fuel production. This Review commences with a fundamental understanding of thermodynamics for photoelectrochemical reactions and the fundamentals of photocathodes. Then, the commercial application of photoelectrochemical technology is prospected. We specifically focus on recent strategies for designing photocathodes with long-term stability, including energy band alignment, hole transport/storage/blocking layer, spatial decoupling, grafting molecular catalysts, protective/passivation layer, surface element reconstruction, and solvent effects. Based on the insights gained from these effective strategies, we propose an outlook of key aspects that address the challenges for development of stable photoelectrodes in future work.

Designing reliable and accurate isotope-tracer experiments for CO2 photoreduction

The photoreduction of carbon dioxide (CO₂) into renewable synthetic fuels is an attractive approach for generating alternative energy feedstocks that may compete with and eventually displace fossil fuels. However, it is challenging to accurately trace the products of CO₂ photoreduction on account of the poor conversion efficiency of these reactions and the imperceptible introduced carbon contamination. Isotope-tracing experiments have been used to solve this problem, but they frequently yield false-positive results because of improper experimental execution and, in some cases, insufficient rigor. Thus, it is imperative that accurate and effective strategies for evaluating various potential products of CO₂ photoreduction are developed for the field. Herein, we experimentally demonstrate that the contemporary approach toward isotope-tracing experiments in CO₂ photoreduction is not necessarily rigorous. Several examples of where pitfalls and misunderstandings arise, consequently making isotope product traceability difficult, are demonstrated. Further, we develop and describe standard guidelines for isotope-tracing experiments in CO₂ photoreduction reactions and then verify the procedure using some reported photoreduction systems.

Applications of Metal-Organic Frameworks and Their Derivatives in Electrochemical CO2 Reduction

Electrochemically reducing CO2 to more reduced chemical species is a promising way that not only enables the conversion of intermittent energy resources to stable fuels, but also helps to build a closed-loop anthropogenic carbon cycle. Among various electrocatalysts for electrochemical CO2 reduction, multifunctional metal-organic frameworks (MOFs) have been employed as highly efficient and selective heterogeneous electrocatalysts due to their ultrahigh porosity and topologically diverse structures. Up to now, great progress has been achieved in the design and synthesis of highly active and selective MOF-related catalysts for electrochemical CO2 reduction reaction (CO2RR), and their corresponding reaction mechanisms have been thoroughly studied. In this review, we summarize the recent progress of applying MOFs and their derivatives in CO2RR, with a focus on the design strategies for electrocatalysts and electrolyzers. We first discussed the reaction mechanisms for different CO2RR products and introduced the commonly applied electrolyzer configurations in the current CO2RR system. Then, an overview of several categories of products (CO, HCOOH, CH4, CH3OH, and multi-carbon chemicals) generated from MOFs or their derivatives via CO2RR was discussed. Finally, we offer some insights and perspectives for the future development of MOFs and their derivatives in electrochemical CO2 reduction. We aim to provide new insights into this field and further guide future research for large-scale applications.

Metal functionalization of two-dimensional nanomaterials for electrochemical carbon dioxide reduction

With the mechanical exfoliation of graphene in 2004, researchers around the world have devoted significant efforts to the study of two-dimensional (2D) nanomaterials. Nowadays, 2D nanomaterials are being developed into a large family with varieties of structures and derivatives. Due to their fascinating electronic, chemical, and physical properties, 2D nanomaterials are becoming an important type of catalyst for the electrochemical carbon dioxide reduction reaction (CO₂RR). Here, we review the recent progress in electrochemical CO₂RR using 2D nanomaterial-based catalysts. First, we briefly describe the reaction mechanism of electrochemical CO₂ reduction to single-carbon (C₁) and multi-carbon (C₂₊) products. Then, we discuss the strategies and principles for applying metal materials to functionalize 2D nanomaterials, such as graphene-based materials, metal-organic frameworks (MOFs), and transition metal dichalcogenides (TMDs), as well as applications of resultant materials in the electrocatalytic CO₂RR. Finally, we summarize the present research advances and highlight the current challenges and future opportunities of using metal-functionalized 2D nanomaterials in the electrochemical CO₂RR.

Recent Advances in Electrochemical, Photochemical, and Photoelectrochemical Reduction of CO2 to C2+ Products

Environmental problems such as global warming are one of the most prominent global challenges. Researchers are investigating various methods for decreasing CO₂ emissions. The CO₂ reduction reaction via electrochemical, photochemical, and photoelectrochemical processes has been a popular research topic because the energy it requires can be sourced from renewable sources. The CO₂ reduction reaction converts stable CO₂ molecules into useful products such as CO, CH₄ , C₂ H₄ , and C₂ H₅ OH. To obtain economic benefits from these products, it is important to convert them into hydrocarbons above C₂ . Numerous investigations have demonstrated the uniqueness of the CC coupling reaction of Cu-based catalysts for the conversion of CO₂ into useful hydrocarbons above C₂ for electrocatalysis. Herein, the principle of semiconductors for photocatalysis is briefly introduced, followed by a description of the obstacles for C₂₊ production. This review presents an overview of the mechanism of hydrocarbon formation above C₂ , along with advances in the improvement, direction, and comprehension of the CO₂ reduction reaction via electrochemical, photochemical, and photoelectrochemical processes.

Kinetic Understanding of Catalytic Selectivity and Product Distribution of Electrochemical Carbon Dioxide Reduction Reaction

CO₂ can be electrochemically reduced to different products depending on the nature of catalysts. In this work, we report comprehensive kinetic studies on catalytic selectivity and product distribution of the CO₂ reduction reaction on various metal surfaces. The influences on reaction kinetics can be clearly analyzed from the variation of reaction driving force (binding energy difference) and reaction resistance (reorganization energy). Moreover, the CO₂RR product distributions are further affected by external factors such as electrode potential and solution pH. A potential-mediated mechanism is found to determine the competing two-electron reduction products of CO₂ that shifts from thermodynamics-controlled product formic acid at less negative electrode potentials to kinetic-controlled product CO at more negative electrode potentials. Based on detailed kinetic simulations, a three-parameter descriptor is applied to identify the catalytic selectivity of CO, formate, hydrocarbons/alcohols, as well as side product H₂. The present kinetic study not only well explains the catalytic selectivity and product distribution of experimental results but also provides a fast way for catalyst screening.

Modulation of *CHxO Adsorption to Facilitate Electrocatalytic Reduction of CO2 to CH4 over Cu-Based Catalysts

Copper (Cu) can efficiently catalyze the electrochemical CO₂ reduction reaction (CO₂RR) to produce value-added fuels and chemicals, among which methane (CH₄) has drawn attention due to its high mass energy density. However, the linear scaling relationship between the adsorption energies of *CO and *CH_xO on Cu restricts the selectivity toward CH₄. Alloying a secondary metal in Cu provides a new freedom to break the linear scaling relationship, thus regulating the product distribution. This paper describes a controllable electrodeposition approach to alloying Cu with oxophilic metal (M) to steer the reaction pathway toward CH₄. The optimized La₅Cu₉₅ electrocatalyst exhibits a CH₄ Faradaic efficiency of 64.5%, with the partial current density of 193.5 mA cm^-2. The introduction of oxophilic La could lower the energy barrier for *CO hydrogenation to *CH_xO by strengthening the M-O bond, which would also promote the breakage of the C-O bond in *CH₃O for the formation of CH₄. This work provides a new avenue for the design of Cu-based electrocatalysts to achieve high selectivity in CO₂RR through the modulation of the adsorption behaviors of key intermediates.

Organic Additive-derived Films on Cu Electrodes Promote Electrochemical CO2 Reduction to C2+ Products Under Strongly Acidic Conditions

Electrochemical CO₂ reduction (CO₂ R) at low pH is desired for high CO₂ utilization; the competing hydrogen evolution reaction (HER) remains a challenge. High alkali cation concentration at a high operating current density has recently been used to promote electrochemical CO₂ R at low pH. Herein we report an alternative approach to selective CO₂ R (>70 % Faradaic efficiency for C₂₊ products, FE_C2+ ) at low pH (pH 2; H₃ PO₄ /KH₂ PO₄ ) and low potassium concentration ([K⁺ ]=0.1 M) using organic film-modified polycrystalline copper (Modified-Cu). Such an electrode effectively mitigates HER due to attenuated proton transport. Modified-Cu still achieves high FE_C2+ (45 % with Cu foil /55 % with Cu GDE) under 1.0 M H₃ PO₄ (pH≈1) at low [K⁺ ] (0.1 M), even at low operating current, conditions where HER can otherwise dominate.

Copper-based catalysts for the electrochemical reduction of carbon dioxide: progress and future prospects

There is an urgent need for the development of high performance electrocatalysts for the CO₂ reduction reaction (CO₂RR) to address environmental issues such as global warming and achieve carbon neutral energy systems. In recent years, Cu-based electrocatalysts have attracted significant attention in this regard. The present review introduces fundamental aspects of the electrocatalytic CO₂RR process together with a systematic examination of recent developments in Cu-based electrocatalysts for the electroreduction of CO₂ to various high-value multicarbon products. Current challenges and future trends in the development of advanced Cu-based CO₂RR electrocatalysts providing high activity and selectivity are also discussed.