Advances in Anion Receptor Chemistry

Synergistic regulation of chloride anion recognition using a triple-functional sites receptor with two different cationic effectors

The synergistic regulation of the multi-functional sites on one receptor molecule with different cationic effectors for anion recognition is scarce to be well understood from the experiment and theory. In this work, a new anion receptor with three functional zones including ether hole, biurea and double bipyridine groups (EUPR) is designed expecting to enhance the chloride anion recognition together with a rational synthesis path being proposed based on four simple and mature organic reaction steps. The conformational structures of the designed receptor EUPR and the binding behaviors for three kinds of ions (Cl-, Na+, and Ag+) are deeply investigated by using density functional theoretical calculations. It is found that Cl- binding via the hydrogen bond interaction can be significantly enhanced and synergistically regulated by the two kinds of cations and the corresponding conformational changes of receptor EUPR. Especially, the conformational pre-organization of receptor caused by the encapsulation of sodium ion into ether hole is benefit to the binding for Cl- in both thermodynamics and kinetics. Na+ binding, in turn, can ever be enhanced by chloride anion, whereas it seems that Ag+ binding cannot always be enhanced by chloride anion, reflecting an electrical complementary matching and mutual enhancement effect for different counter ions. Moreover, solvent effect calculations indicate that EUPR may be an ideal candidate structure for Cl- recognition by strategy of counter ion enhancement in water. Additionally, a visual study of intermolecular noncovalent interaction (NCI) and molecular electrostatic potential (ESP) are used for the analysis on the nature of interactions between receptor and bound ions.

Recent Advances in Thiourea Based Colorimetric and Fluorescent Chemosensors for Detection of Anions and Neutral Analytes: A Review

Thioureas and their derivatives are organosulfur compounds having excellent biological and non-biological applications. These compounds contain S- and N-, which are nucleophilic and allow for establishing inter-and intramolecular hydrogen bonding. These characteristics make thiourea moiety a very important chemosensor to detect various environmental pollutants. This article covers a broad range of thioureas and their derivatives that are used for highly sensitive, selective, and simple fluorimetric (turn-off and turn-on), and colorimetric chemosensors for the detection and determination of different types of anions, such as CN-, AcO-, F-, ClO- and citrate ions, etc., and neutral analytes such as ATP, DCP, and Amlodipine, etc., in biological, environmental, and agriculture samples. Further, the sensing performances of thioureas-based chemosensors have been compared and discussed, which could help the readers for the future design of organic fluorescent and colorimetric sensors to detect anions and neutral analytes. We hope this study will support the new thoughts to design highly efficient, selective, and sensitive chemosensors to detect different analytes in biological, environmental, and agricultural samples.

On the halide aggregation into the [Au4(PPh3)4]4+ cluster core. Insights from structural, optical and interaction energy analysis in [(Ph3PAu)4X2]2+ and [(Ph3PAu)4X]3+ species (X = Cl-, Br-, I-)

The aggregation of halide atoms into gold clusters offers an interesting scenario for the development of novel metal-based cavities for anion recognition and sensing applications. Thus, further understanding of the different contributing terms leading to efficient cluster-halide aggregation is relevant to guide their synthetic design. In this report, we evaluate the formation of [(Ph3PAu)4X2]2+ and [(Ph3PAu)4X]3+ species (X = Cl-, Br-, I-) in terms of different energy contributions underlying the stabilization of the cluster-halide interaction, and the expected UV-vis absorption profiles as a result of the variation in frontier orbital arrangements. Our results denote that a non-planar Au4 core shape enables enhanced halide aggregation, which is similar for Cl-, Br-, and I-, in comparison to the hypothetical planar Au4 counterparts. The electrostatic nature of the interaction involves a decreasing ion-dipole term along with the series, and for iodine species, higher-order electrostatic contributions become more relevant. Hence, the obtained results help in gaining further understanding of the different stabilizing and destabilizing contributions to suitable cluster-based cavities for the incorporation of different monoatomic anions.

Ammonium halide selective ion pair recognition and extraction with a chalcogen bonding heteroditopic receptor

The first example of a heteroditopic receptor capable of cooperative recognition and extraction of ammonium salt (NH4X) ion-pairs is described. Consisting of a bidentate 3,5-bis-tellurotriazole chalcogen bond donor binding cleft, the appendage of benzo-15-crown-5 (B15C5) substituents to the tellurium centres facilitates binding of the ammonium cation via a co-facial bis-B15C5 sandwich complex, which serves to switch on chalcogen bonding-mediated anion binding potency. Extensive quantitative ion-pair recognition 1H NMR titration studies in CD3CN/CDCl3 (1 : 1, v/v) solvent media reveal impressive ion-pair binding affinities towards a variety of ammonium halide, nitrate and thiocyanate salts, with the heteroditopic receptor displaying notable ammonium halide salt selectivity. The prodigious solution phase NH4X recognition also translates to efficient solid-liquid and liquid-liquid extraction capabilities.

Supramolecular chemistry of liquid-liquid extraction

Liquid-Liquid Extraction (LLE) is a venerable and widely used method for the separation of a targeted solute between two immiscible liquids. In recent years, this method has gained popularity in the supramolecular chemistry community due to the development of various types of synthetic receptors that effectively and selectively bind specific guests in an aqueous medium through different supramolecular interactions. This has eventually led to the development of state-of-the-art extraction technologies for the removal and purification of anions, cations, ion pairs, and small molecules from one liquid phase to another liquid phase, which is an industrially viable method. The focus of this perspective is to furnish a vivid picture of the current understanding of supramolecular interaction-based LLE chemistry. This will not only help to improve separation technology in the chemical, mining, nuclear waste treatment, and medicinal chemistry sectors but is also useful to address the purity issue of the extractable species, which is otherwise difficult. Thus, up-to-date knowledge on this subject will eventually provide opportunities to develop large-scale waste remediation processes and metallurgy applications that can address important real-life problems.

Selective Solid-Liquid Extraction of Lithium Cation Using Tripodal Sulfate-Binding Receptors Driven by Electrostatic Interactions

Owing to the important role of and increasing demand for lithium resources, lithium extraction is crucial. The use of molecular extractants is a promising strategy for selective lithium recovery, in which the interaction between lithium and the designed extractant can be manipulated at the molecular level. Herein, we demonstrate that anion receptors of tripodal hexaureas can selectively extract Li2SO4 solids into water containing DMSO (0.8% water) compared to other alkali metal sulfates. The hexaurea receptor with terminal hexyl chains displays the best Li+ extraction selectivity at 2-fold over Na+ and 12.5-fold over K+. The driving force underpinning selective lithium extraction is due to the combined interactions of Li+-SO42- electrostatics and the ion-dipole interaction of the lithium-receptor (carbonyl groups and N atoms); the latter was found to be cation size dependent, as supported by computational calculations. This work indicates that anion binding receptors could drive selective cation extraction, thus providing new insights into the design of receptors for ion recognition and separation.

Antimicrobial, antioxidant, cell imaging and sensing applications of fluorescein derivatives: A review

Fluorescein itself is a synthetic organic compound and a prominent member of the xanthene dye family. It exhibits strong fluorescence under ultraviolet (UV) or blue light excitation, making it widely used in various applications, including fluorescence microscopy, flow cytometry, immunoassays, and molecular biology techniques. One of the reasons fluorescein derivatives are highly valuable is their tunable fluorescence properties. Through chemical modifications of the fluorescein structure, different functional groups or substituents can be introduce, altering the compound's fluorescence characteristics such as emission wavelength, intensity, and photo stability. This flexibility allows for tailoring of fluorescent probes to specific experimental requirements, enhancing their utility in a range of scientific disciplines. Fluorescein derivatives also possess excellent antimicrobial and antioxidant activity. This review sheds light on the significant impact of fluorescein derivatives as biological active compounds, highlighting their potential in designing new therapeutic agents with antimicrobial properties. Additionally, their role as antioxidants is discussed. A major aspect covered in the review is the application of fluorescein derivatives as powerful cell imaging probes. Their unique fluorescent properties make them valuable tools for visualizing cellular structures and processes, opening up new possibilities for studying cellular dynamics and interactions.

Remote control of anion binding by CH-based receptors

We show that the substitution of tetra(benzimidazole)resorcin[4]arenes with electron withdrawing groups on the upper rim enhances anion binding at the opposite edge by more than three orders of magnitude. Moreover, selective anion binding at either the OH/NH or CH binding sites is demonstrated.

Anion-Binding Properties of Aliphatic Symmetric Squaramide Receptors

Squaramides (SQs), which are very popular for their H-bonding ability, have attracted great interest due to their wide range of applications such as asymmetric synthesis, pharmacology, and anion transportation. In this study, aliphatic symmetric SQs based on cis/trans-1,2-diaminocyclohexane (DACH) substituted with cyclic tertiary amines, synthesized in four steps under simple reaction conditions, were investigated for the first time for their ability to bind Cl-, Br-, and I- anions. The changes in cis/trans geometric isomers and the cyclic ring (pyrrolidine vs piperidine) were found to have a combined effect on the degree of anion binding. The spectroscopic titrations of the SQs with TBA-Cl, TBA-Br, and TBA-I in the range of 0.2 to 20.0 equiv were monitored by 1H NMR, and the analyses of the magnitude of chemical shift differences in the NH peaks of the SQs in course of titration were performed by DynaFit and BindFit programs for the calculation of their Ka values. All symmetric SQs I-IV were found to selectively bind Cl- anion more strongly than Br- anion to varying degrees depending on the SQ derivatives. Especially, SQ IV, which has a symmetric trans-DACH and a pyrrolidine ring, was found to have the highest Cl- anion-binding ability compared to the other SQs. However, the SQs did not show any change in the chemical shift of the NH proton in 1H NMR upon successive addition of TBA-I, indicating that they do not interact with I- anion. The stoichiometries of the complexation behavior of SQs I-IV toward Cl- and Br- anions were also analyzed by Job plots.

What can molecular assembly learn from catalysed assembly in living organisms?

Molecular assembly is the process of organizing individual molecules into larger structures and complex systems. The self-assembly approach is predominantly utilized in creating artificial molecular assemblies, and was believed to be the primary mode of molecular assembly in living organisms as well. However, it has been shown that the assembly of many biological complexes is "catalysed" by other molecules, rather than relying solely on self-assembly. In this review, we summarize these catalysed-assembly (catassembly) phenomena in living organisms and systematically analyse their mechanisms. We then expand on these phenomena and discuss related concepts, including catalysed-disassembly and catalysed-reassembly. Catassembly proves to be an efficient and highly selective strategy for synergistically controlling and manipulating various noncovalent interactions, especially in hierarchical molecular assemblies. Overreliance on self-assembly may, to some extent, hinder the advancement of artificial molecular assembly with powerful features. Furthermore, inspired by the biological catassembly phenomena, we propose guidelines for designing artificial catassembly systems and developing characterization and theoretical methods, and review pioneering works along this new direction. Overall, this approach may broaden and deepen our understanding of molecular assembly, enabling the construction and control of intelligent assembly systems with advanced functionality.

Selective recognition and extraction of iodide from pure water by a tripodal selenoimidazol(ium)-based chalcogen bonding receptor

A selenium-based tripodal chalcogen bond (ChB) donor TPI-3Se is demonstrated for the recognition and extraction of I- from 100% water medium. NMR and ITC studies with the halides reveal that the ChB donor selectively binds with the large, weakly hydrated I-. Interestingly, I- crystallizes out selectively in the presence of other halides supporting the superiority of the selective recognition of I-. The X-ray structure of the ChB-iodide complex manifests both the μ1 and μ2 coordinated interactions, which is rare in the C-Se···I chalcogen bonding. Furthermore, to validate the selective I- binding potency of TPI-3Se in pure water, comparisons are made with its hydrogen and halogen bond donor analogs. The computational analysis also provides the mode of I- recognition by TPI-3Se. Importantly, this receptor is capable of extracting I- from pure water through selenium sigma-hole and I- interaction with a high degree of efficiency (∼70%).

Chemoselective Electrochemical Cleavage of Sulfonimides as a Direct Way to Sulfonamides

A new method for selective cleavage of sulfonimides into sulfonamides in high yields using a simple electrochemical approach is shown. As revealed by the electrochemical study, the aromatic sulfonimides can be selectively cleaved by electrolysis of the starting compound at a given potential (only -0.9 V vs SCE for the nosyl group). The high chemoselectivity was confirmed by preparative electrolysis, and the results were supported with DFT calculations of a set of substances bearing different sulfonimide functions. Moreover, various experimental setups together with other attempts to simplify the procedure were tested. Finally, the removal of the p-nosyl group from the corresponding sulfonimides proceeds smoothly regardless of the number of nosyl groups and the overall shape of the complex molecule. Thus, the method is interesting for use in the field of multifunctional molecules such as calix[n]arenes.

Thiourea-Based Receptors for Anion Recognition and Signaling

This work reports on two thiourea-based receptors with pyridine and amine units including 1-naphthyl (MT1N) and 4-nytrophenyl (MT4N) as signaling units. For both compounds, their affinity and signaling ability toward various anions of different geometry and basicity in DMSO were studied using UV-vis, fluorescence, and 1H NMR techniques. Anion recognition studies revealed that both MT1N and MT4N have, in general, high affinities toward basic anions. In this regard, a higher acidity of the MT4N receptor was demonstrated. Furthermore, MT4N has a higher affinity for fluoride (log K1 = 5.98) than for the other anions and can effectively detect it through colorimetric changes that can be monitored by the UV-vis technique. The interaction between receptors and anions mainly involves the hydrogens of the amino and thiourea groups of the former. Complementary single-crystal X-ray diffraction studies and molecular modeling at the DFT level were also performed.

Colorimetric detection of fluoride and mercury (II) ions using isatin Schiff base skeleton bearing pyridine-2-carboxamidine moiety: Experimental and theoretical studies

An isatin-Schiff base ligand (ISS) bearing a pyridine-2-carboxamidine moiety was synthesized through a facile and convenient method for the highly selective colorimetric detection of Hg+2 and F- ions. The sensing ability of the synthesized ISS sensor toward Hg+2 and F- was established using colorimetric and UV-visible techniques. The developed sensor showed excellent selectivity in the presence of other competing ions for Hg+2 and F-, with a color change from yellow to red. The limits of the detection for sensing Hg+2 and F- were calculated to be 2.9 ×10-6 M and 1.4 ×10-5 M, respectively. Job's plot based on spectroscopic data revealed a 1:1 binding stoichiometry between ISS and Hg+2 or F- ion. Furthermore, the binding mechanism, optimized structures and electronic properties of ISS, ISS-F- adduct and ISS-Hg+2 complex were investigated using density functional theory (DFT) calculations. DFT results indicated a decrease of the HOMO-LUMO energy gap for ISS upon interaction with the F- and Hg+2 species which were in good agreement with the experimental outcomes.

Anion receptor and heavy metal-free redox mediator decorated separator for lithium-sulfur batteries

The adsorption-catalysis synergy for accelerated conversion of polysulfides is critical toward the electrochemical stability of lithium-sulfur battery (LSB). Herein, a non-metallic polymer network with anion receptor units, trifluoromethanesulfonyl (CF3SO2-) substituted aza-ether, was in-situ integrated on PE separator, working as an efficient host for anchoring lithium thiophosphates (LPS) as redox mediators and polysulfides through Lewis acid-base interaction. The anchored LPS on the modified PE separator displayed a robust chemical adsorption ability towards polysulfides through the formation of SS bond. Meanwhile, LPS decreased the energy barrier of Li2S nucleation and promoted redox reaction kinetics. The battery with LPS decorated separator revealed a long cycling lifespan with a per cycle decay of 0.056 % after 600 cycles, and a competitive initial capacity of 889.1 mAh/g when the of sulfur cathode increased to 3 mg cm-2. This work developed a new design strategy to promote the utilization of lithium phosphorus sulfide compounds in LSB.

Anion Recognition in Solution: Insights from Thermodynamics and Ultrafast Structural Dynamics

Anion recognition through noncovalent interactions stands as an emerging field in supramolecular chemistry, exerting a profound influence on the regulation of biological functions. Herein, the thermodynamics of complexation between sodium cyanate (NaOCN) and calix[4]pyrrole was systematically investigated by linear and nonlinear IR spectroscopy, highlighting enthalpy changes as the dominant driving force. The overall orientational relaxation of bound anion can be described by an Arrhenius-type activated process, yielding an activation energy of 15.0 ± 1.0 kJ mol-1. The structural dynamics of contact ion pairs (CIPs) formed between Na+ and OCN- in solution showed a negligible temperature effect, suggesting entropy changes as the principal governing factor. Further analysis revealed that anion recognition in solution is mediated by conformational changes of the receptor and collective rearrangement of hydrogen bond dynamics. This study, framed within the paradigms of thermodynamics and ultrafast structural dynamics, substantially advances our comprehension of the microscopic mechanisms underlying anion recognition in the realm of supramolecular chemistry.

An Insight into Anion Extraction by Amphiphiles: Hydrophobic Microenvironments as a Requirement for the Extractant Selectivity

Coupling of electron-deficient urea units with aliphatic chains gives rise to amphiphilic compounds that bind to phosphate and benzoate anions in the hydrogen bonding competitive solvent (DMSO) with KAss = 6 580 M-1 and KAss = 4 100 M-1, respectively. The anchoring of these receptor moieties to the dendritic support does not result in a loss of anion binding and enables new applications. Due to the formation of a microenvironment in the dendrimer, the high selectivity of the prepared compound toward benzoate is maintained even in the presence of aqueous media during extraction experiments. In the presence of binding sites at 5 mM concentration, the amount of benzoate corresponding to the full binding site occupancy is transferred into the chloroform phase from its 10 mM aqueous solution. A thorough investigation of the extraction behavior of the dendrimer reported here, supported by a series of molecular dynamics simulations, provides new insight into the fundamental principles of extraction of inorganic anions by amphiphiles.

A Carbazole-1,8-Disulfonamide-Derived Cryptand Receptor for Anion Recognition

A novel cryptand-like anion receptor 1 was synthesized in reasonable yield by a one-step condensation reaction. The UV-vis spectroscopic titrations indicated that cryptand 1 bound AcO- in preference to other monovalent anions (including its competing F- and H2PO4-) in CH3CN, generating a 1:1 binding complex with Ka = 51,000 M-1. Moreover, the crystal structures revealed that the acetate ion was encapsulated inside the cryptand's cavity in a 1:1 manner, through multiple N-H···O hydrogen bonds (although having two different crystal forms).

Tripodal Organic Cages with Unconventional CH···O Interactions for Perchlorate Remediation in Water

Perchlorate anions used in industry are harmful pollutants in groundwater. Therefore, selectively binding perchlorate provides solutions for environmental remediation. Here, we synthesized a series of tripodal organic cages with highly preorganized Csp3-H bonds that exhibit selectively binding to perchlorate in organic solvents and water. These cages demonstrated binding affinities to perchlorate of 105-106 M-1 at room temperature, along with high selectivity over competing anions, such as iodide and nitrate. Through single crystal structure analysis and density functional theory calculations, we identified unconventional Csp3-H···O interactions as the primary driving force for perchlorate binding. Additionally, we successfully incorporated this cage into a 3D-printable polymer network, showcasing its efficacy in removing perchlorate from water.

Investigating the Stacking Interactions Responsible for Driving 3D Self-Association of Tricarb Macrocycles

We have investigated the noncovalent forces that play a crucial role in the three-dimensional (3D) self-association of the tricarb macrocycle (composed of alternating triazoles and carbazoles) to understand the multilayer stacks observed through electron microscopy. To explore this idea quantitatively, we have investigated a stacked dimer model of tricarb, where we consider homochiral as well as heterochiral forms of the dimer. We have computed the rotational potential energy surface of the dimer by conducting an angle-dependent scan between the two macrocycles using different levels of theory including the RI-MP2 ab initio method. We observe that dimers oriented at an angle of 60° exhibit the highest stability, while a secondary minimum is observed at an angle of 30°. While density functional theory (DFT) describes the behavior of both minima very close to that obtained with RI-MP2, semiempirical and MM models appear to obtain only a shoulder instead of the second minimum. To further understand the underlying interactions responsible for stabilizing the self-assembly of the macrocycles, we employed energy decomposition analysis (EDA) using SAPT0. This quantitative assessment allowed us to identify the major contributing noncovalent interactions, including electrostatic, exchange-repulsion, dispersion, and induction. Finally, we expanded our study to evaluate the accuracy of the MIM (molecules-in-molecules) fragmentation methodology in capturing the crucial π-stacking interactions. Our benchmarking results using the MIM method accurately replicated the angle-dependent PES results. This shows the efficacy of MIM in predicting the noncovalent interactions responsible for the construction of 3D and other higher-order nanoarchitectures for tricarb and related compounds.

Metal-free synthesis of selenoesters directly from carboxylic acids using bifunctional selenoureas under batch and continuous-flow conditions

A new metal-free method for the synthesis of selenoesters directly from carboxylic acids in a flow reactor is reported. The carboxylic acids, Michael acceptors, and bifunctional selenoureas (source of selenium and nucleophile, activator of carbonyl group) were reacted to obtain selenoesters (up to 70% yield). An evidence-backed plausible mechanism is also presented.

Synthesis of Cu (II) and Zn (II) Complexes of a Quinoline Based Flexible Amide Receptor as Fluorescent Probe for Dihydrogen Phosphate and Hydrogen Sulphate and Their Antibacterial Activity

A novel 8-hydroxy quinoline-derived amide receptor, in conjunction with its Cu (II) and Zn (II) complexes, has been strategically developed to function as remarkably efficient fluorescent receptors with a distinct capability for anion sensing. The comprehensive characterization of the synthesized compounds were achieved through UV-Vis, IR, NMR, and HRMS spectroscopic techniques. Among the Cu (II) and Zn (II) complexes, the latter exhibits superior selectivity for anions, specifically dihydrogen phosphate and hydrogen sulfate, as their tetrabutylammonium salts in a 9:1 acetonitrile-water (v/v) mixture. The Cu (II) complex demonstrates enhanced anion binding compared to the amide ligand, albeit with reduced selectivity. Furthermore, the affinity was evaluated using the Benesi-Hildebrand plot. The binding constants and Limit of Detection (LOD) for both complexes were precisely quantified. The Job plot illustrates a clear 1:1 binding interaction between the metal complexes and the guest anions. Significantly, both metal-complex receptors display a broad spectrum of antibacterial activity, against both gram-positive and gram-negative bacteria. It is worth highlighting that the Zn (II) complexed receptor outperforms the Cu (II) complexed receptor, as evidenced by its considerably lower Minimum Inhibitory Concentration (MIC) value against both bacterial strains.

Photocontrolled activation of doubly o-nitrobenzyl-protected small molecule benzimidazoles leads to cancer cell death

Artificial biomimetic chloride anionophores have shown promising applications as anticancer scaffolds. Importantly, stimuli-responsive chloride transporters that can be selectively activated inside the cancer cells to avoid undesired toxicity to normal, healthy cells are very rare. Particularly, light-responsive systems promise better applicability for photodynamic therapy because of their spatiotemporal controllability, low toxicity, and high tunability. Here, in this work, we report o-nitrobenzyl-linked, benzimidazole-based singly and doubly protected photocaged protransporters 2a, 2b, 3a, and 3b, respectively, and benzimidazole-2-amine-based active transporters 1a-1d. Among the active compounds, trifluoromethyl-based anionophore 1a showed efficient ion transport activity (EC50 = 1.2 ± 0.2 μM). Detailed mechanistic studies revealed Cl-/NO3- antiport as the main ion transport process. Interestingly, double protection with photocages was found to be necessary to achieve the complete "OFF-state" that could be activated by external light. The procarriers were eventually activated inside the MCF-7 cancer cells to induce phototoxic cell death.

π-Stacking among the Anthracenyl Groups of a Copper Complex Resulted in Doubling of Unit Cell Volume To Provide New Polymorphs

Two polymorphs of the 9-N-(3-imidazolylpropylamino)methylanthracene (Hanthraimmida) containing hydrated copper(II)-2,6-pyridinedicarboxylate complex are reported. The two polymorphs have either lamellar or Herringbone arrangements of π-stacks among the anthracenyl groups of organocation. The difference between the two polymorphs originated from having face-to-face stacking arrangements between the two anthracenyl groups of the symmetry independent cations within the unit cell in one of the polymorphs. The π-stacked anthracenyl groups in consecutive layers of the polymorphs are oriented in one direction in the polymorph designated as P1, whereas the polymorph designated as P2 has such orientations in opposite directions. The unit cell volume of the polymorph P2 (Z = 4) has approximately twice the volume of the polymorph P1 (Z = 2); it happend due to coalescence of two unit cells of P1 in the ab-crystallographic plane. A mixed methanol/water solvate of the copper complex is also reported. It has a channel-like arrangement of the cations; has the anions and the solvents within the cation embraced channel-like enclosures. This complex is unstable, once taken out from the methanol solvent, it transforms in real time to P2 by replacements of the methanol molecules by water molecules.

Programmed guest confinement via hierarchical cage to cage transformations

Taking inspiration from Nature, where (bio)molecular geometry variations are exploited to tune a large variety of functions, supramolecular chemistry has continuously developed novel systems in which, as a consequence of a specific stimulus, structural changes occur. Among the different architectures, supramolecular cages have been continuously investigated for their capability to act as functional hosts where guests can be released in a controlled fashion. In this paper, a novel methodology based on the use of phenanthrenequinone is applied to selectively change the binding properties of a tris(2-pyridylmethyl)amine TPMA-based cage. In particular, subcomponent substitution has been used to change structural cage features thus controlling the inclusion ratio of competing guests differing in size or chirality.

Steric Control over the Threading of Pyrophosphonates with One or Two Cyanostar Macrocycles during Pseudorotaxane Formation

The supramolecular recognition of anions is increasingly harnessed to achieve the self-assembly of supramolecular architectures, ranging from cages and polymers to (pseudo)rotaxanes. The cyanostar (CS) macrocycle has previously been shown to form 2 : 1 complexes with organophosphate anions that can be turned into [3]rotaxanes by stoppering. Here we achieved steric control over the assembly of pseudorotaxanes comprising the cyanostar macrocycle and a thread that is based, for the first time, on organo-pyrophosphonates. Subtle differences in steric bulk on the threads allowed formation of either [3]pseudorotaxanes or [2]pseudorotaxanes. We demonstrate that the threading kinetics are governed by the steric demand of the organo-pyrophosphonates and in one case, slows down to the timescale of minutes. Calculations show that the dianions are sterically offset inside the macrocycles. Our findings broaden the scope of cyanostar-anion assemblies and may have relevance for the design of molecular machines whose directionality is a result of relatively slow slipping.

Stimulus-Controlled Anion Binding and Transport by Synthetic Receptors

Anionic species are omnipresent and involved in many important biological processes. A large number of artificial anion receptors has therefore been developed. Some of these are capable of mediating transmembrane transport. However, where transport proteins can respond to stimuli in their surroundings, creation of synthetic receptors with stimuli-responsive functions poses a major challenge. Herein, we give a full overview of the stimulus-controlled anion receptors that have been developed thus far, including their application in membrane transport. In addition to their potential operation as membrane carriers, the use of anion recognition motifs in forming responsive membrane-spanning channels is discussed. With this review article, we intend to increase interest in transmembrane transport among scientists working on host-guest complexes and dynamic functional systems in order to stimulate further developments.

Highly soluble bisurea derivatives for anion recognition

Highly soluble bisurea derivatives having 1,2-phenoxyethane (receptors 2) and 1,2-ethoxyethane (3) moieties as spacer groups were designed and prepared based on previously reported receptors with the 2,2'-binaphthyl group as a spacer (1). The receptors can be prepared in fewer steps from commercially available starting materials. The solubilities and anion recognition abilities were evaluated by UV-vis and NMR spectral methods. Receptors 2 and 3 bearing a flexible linker showed good solubilities in common organic solvents such as CHCl₃, MeCN, 2-butanone, toluene, and THF. Although the anion recognition abilities of receptors 2 and 3 were lower than those of receptors 1, the greatly improved solubilities of receptors 2 and 3 allow the association of anions under more concentrated conditions for the solubilisation of salts such as lithium chloride in organic solvents.

Conformationally Flexible Cleft Receptor for Chloride Anion Transport

The design and synthesis of a cleft-shaped bis-diarylurea receptor for chloride anion transport is reported in this work. The receptor is based on the foldameric nature of N,N'-diphenylurea upon its dimethylation. The bis-diarylurea receptor exhibits a strong and selective affinity for chloride over bromide and iodide anions. A nanomolar quantity of the receptor efficiently transports the chloride across a lipid bilayer membrane as a 1:1 complex (EC₅₀ = 5.23 nm). The work demonstrates the utility of the N,N'-dimethyl-N,N'-diphenylurea scaffold in anion recognition and transport.

An amphiphilic macrocyclic acylhydrazone dimer: Facile synthesis and dual channel detection and removal of phthalate anion

Despite the large number of dicarboxylates' receptors, the dual channel ones capable of recognizing and removing of phthalate anion are rare and the task remains challenging. In this paper, a facilely synthesized amphiphilic macrocyclic acylhydrazone dimer (AMAD) can not only detect phthalate anion selectively, through both color changes and turn-on fluorescence in solution as well as in solid state, but is also able to remove it from either water or organic solvents. The current study paves the way for the search of more multiple functional receptors of dicarboxylates anions.

Selectivity Rule of Cryptands for Anions: Molecular Rigidity and Bonding Site

Cryptands utilize inside CH or NH groups as hydrogen bond (H-bond) donors to capture anions such as halides. In this work, the nature and selectivity of confined hydrogen bonds inside cryptands were computationally analyzed with the energy decomposition scheme based on the block-localized wavefunction method (BLW-ED), aiming at an elucidation of governing factors in the binding between cryptands and anions. It was revealed that the intrinsic strengths of inward hydrogen bonds are dominated by the electrostatic attraction, while the anion preferences (selectivity) of inner CH and NH hydrogen bonds are governed by the Pauli exchange repulsion and electrostatic interaction, respectively. Typical conformers of cages are classified into two groups, including the C_3(h) -symmetrical conformers, in which all halide anions are located near the centroids of cages, and the "semi-open" conformers, which exhibit shifted bonding sites for different halide anions. Accordingly, the difference in governing factors of selectivity is attributed to either the rigidity of cages or the binding site of anions for these two groups. In details, the C₃ conformers of NH cryptands can be enlarged more remarkably than the C_3(h) -symmetrical conformers of CH cryptands as the size of anion (ionic radius) increases, resulting in the relaxation of the Pauli repulsion and a dramatic reduction in electrostatic attraction, which eventually rules the selectivity of NH cryptands for halide anions. By contrary, the CH cryptands are more rigid and cannot effectively reduce the Pauli repulsion, which subsequently governs the anion preference. Unlike C₃ conformers whose rigidity determines the selectivity, semi-open conformers exhibit different binding sites for different anions. From F^- to I^- , the bonding site shifts toward the outside end of the pocket inside the semi-open NH cryptand, leading to the significant reduction of the electrostatic interaction that dominates the anion preference. Differently, binding sites are much less affected by the size of anion inside the semi-open CH cryptand, in which the Pauli exchange repulsion remains the key factor for the selectivity of inner hydrogen bonds.

Stereoselective Assembly of Hydrogen-Bonded Anionic Cages Dictated by Organophosphate-Based Chiral Nodes

Inspired by the signal transduction function of organophosphates in biological systems, bioactive organophosphates were utilized for the first time as chiral nodes to dictate the stereoselective assembly of hydrogen-bonded anionic cages. Phosphonomycin (antibiotics), tenofovir (antivirals), adenosine monophosphate (natural product, AMP) and clindamycin phosphate (antibiotics) were assembled with an achiral bis-monourea ligand, thereby leading to the stereoselective formation of quadruple or triple helicates. The extent of the stereoselectivity could be enhanced by either lowering the temperature or adding stronger-binding cations as templates. With the chiral anionic cages as the host, some enantioselectivity was achieved when binding chiral quaternary ammonium cations.

High-efficiency gold recovery by additive-induced supramolecular polymerization of β-cyclodextrin

Developing an eco-friendly, efficient, and highly selective gold-recovery technology is urgently needed in order to maintain sustainable environments and improve the utilization of resources. Here we report an additive-induced gold recovery paradigm based on precisely controlling the reciprocal transformation and instantaneous assembly of the second-sphere coordinated adducts formed between β-cyclodextrin and tetrabromoaurate anions. The additives initiate a rapid assembly process by co-occupying the binding cavity of β-cyclodextrin along with the tetrabromoaurate anions, leading to the formation of supramolecular polymers that precipitate from aqueous solutions as cocrystals. The efficiency of gold recovery reaches 99.8% when dibutyl carbitol is deployed as the additive. This cocrystallization is highly selective for square-planar tetrabromoaurate anions. In a laboratory-scale gold-recovery protocol, over 94% of gold in electronic waste was recovered at gold concentrations as low as 9.3 ppm. This simple protocol constitutes a promising paradigm for the sustainable recovery of gold, featuring reduced energy consumption, low cost inputs, and the avoidance of environmental pollution.

Cyclo[2]carbazole[2]pyrrole: a preorganized calix[4]pyrrole analogue

A cyclo[2]carbazole[2]pyrrole (2) consisting of two carbazoles and two pyrroles has been synthesized by directly linking the carbazole 1- and 8-carbon atoms to the pyrrole α-carbon atoms. Macrocycle 2 is an extensively conjugated 16-membered macrocyclic ring that is fixed in a pseudo-1,3-alternate conformation. This provides a preorganized anion binding site consisting of two pyrrole subunits. ¹H NMR spectroscopic analysis revealed that only the two diagonally opposed pyrrole NH protons, as opposed to the carbazole protons, take part in anion binding. Nevertheless, cyclo[2]carbazole[2]pyrrole 2 binds representative anions with higher affinity in CD₂Cl₂ than calix[4]pyrrole (1), a well-studied non-conjugated tetrapyrrole macrocycle that binds anions via four pyrrolic NH hydrogen bond interactions. On the basis of computational studies, the higher chloride anion affinity of receptor 2 relative to 1 is rationalized in terms of a larger binding energy and a lower host strain energy associated with anion complexation. In the presence of excess fluoride or bicarbonate anions, compound 2 loses two pyrrolic NH protons to produce a stable dianionic macrocycle [2-2H]^2- displaying a quenched fluorescence.

The strength and selectivity of perfluorinated nano-hoops and buckybowls for anion binding and the nature of anion-π interactions

Perfluorinated cycloparaphenylenes (F-[n]CPP, n = 5-8), boron nitride nanohoop (F-[5]BNNH), and buckybowls (F-BBs) were proposed as anion receptors via anion-π interactions with halide anions (Cl^- , Br^- and I^- ), and remarkable binding strengths up to -294.8 kJ/mol were computationally verified. The energy decomposition approach based on the block-localized wavefunction method, which combines the computational efficiency of molecular orbital theory and the chemical intuition of ab initio valence bond theory, was applied to the above anion-π complexes, in order to elucidate the nature and selectivity of these interactions. The overall attraction is mainly governed by the frozen energy component, in which the electrostatic interaction is included. Remarkable binding strengths with F-[n]CPPs can be attributed to the accumulated anion-π interactions between the anion and each conjugated ring on the hoop, while for F-BBs, additional stability results from the curved frameworks, which distribute electron densities unequally on π-faces. Interestingly, the strongest host was proved to be the F-[5]BNNH, which exhibits the most significant anisotropy of the electrostatic potential surface due to the difference in the electronegativities of nitrogen and boron. The selectivity of each host for anions was explored and the importance of the often-overlooked Pauli exchange repulsion was illustrated. Chloride anion turns out to be the most favorable anion for all receptors, due to the smallest ionic radius and the weakest destabilizing Pauli exchange repulsion.

Molecular Pincers Using a Combination of N-H and C-H Donors for Anion Binding

A naphthalene imide (1) and a naphthalene (2) bearing two pyrrole units have been synthesized, respectively, as anion receptors. It was revealed by ¹H NMR spectral studies carried out in CD₃CN that receptors 1 and 2 bind various anions via hydrogen bonds using both C-H and N-H donors. Compared with receptor 2, receptor 1 shows higher affinity for the test anions because of the enhanced acidity of its pyrrole NH and naphthalene CH hydrogens by the electron-withdrawing imide substituent. Molecular mechanics computations demonstrate that the receptors contact the halide anions via only one of the two respective available N-H and C-H donors whereas they use all four donors for binding of the oxyanions such as dihydrogen phosphate and hydrogen pyrophosphate. Receptor 1, a push-pull conjugated system, displays a strong fluorescence centered at 625 nm, while receptor 2 exhibits an emission with a maximum peak at 408 nm. In contrast, upon exposure of receptors 1 and 2 to the anions in question, their fluorescence was noticeably quenched particularly with relatively basic anions including F^-, H₂PO₄^-, HP₂O₇^3-, and HCO₃^-.

Protonophoric and mitochondrial uncoupling activity of aryl-carbamate substituted fatty acids

Aryl-urea substituted fatty acids are protonophores and mitochondrial uncouplers that utilise a urea-based synthetic anion transport moiety to carry out the protonophoric cycle. Herein we show that replacement of the urea group with carbamate, a functional group not previously reported to possess anion transport activity, produces analogues that retain the activity of their urea counterparts. Thus, the aryl-carbamate substituted fatty acids uncouple oxidative phosphorylation and inhibit ATP production by collapsing the mitochondrial proton gradient. Proton transport proceeds via self-assembly of the deprotonated aryl-carbamates into membrane permeable dimeric species, formed by intermolecular binding of the carboxylate group to the carbamate moiety. These results highlight the anion transport capacity of the carbamate functional group.

Chemically Driven Rotatory Molecular Machines

Molecular machines are at the frontier of biology and chemistry. The ability to control molecular motion and emulating the movement of biological systems are major steps towards the development of responsive and adaptive materials. Amazing progress has been seen for the design of molecular machines including light-induced unidirectional rotation of overcrowded alkenes. However, the feasibility of inducing unidirectional rotation about a single bond as a result of chemical conversion has been a challenging task. In this Review, an overview of approaches towards the design, synthesis, and dynamic properties of different classes of atropisomers which can undergo controlled switching or rotation under the influence of a chemical stimulus is presented. They are categorized as molecular switches, rotors, motors, and autonomous motors according to their type of response. Furthermore, we provide a future perspective and challenges focusing on building sophisticated molecular machines.

Anion-Induced Reversible Actuation of Squaramide-Crosslinked Polymer Gels

Supramolecular anion binding to squaramide crosslinkers in poly(N,N-dimethylacrylamide) gel networks enhances swelling and allows reversible chemically driven actuation. The volume swelling ratio of the gels is shown to depend on both the type of anion and its concentration. ¹H NMR and UV-vis titrations with the squaramide crosslinkers reveal a relationship between anion binding affinity and the concentration-dependent swelling behavior. Gel swelling is shown to be reversible, and by embedding a solid support into rod-shaped gels, soft actuators are fabricated that undergo forward and backward bending motion in response to changing anion concentration. The swelling and bending process, which is accompanied by intense green coloration of the gel, is achieved by using only low amounts of crosslinker. This macroscopic actuation achieved by anion binding to specific molecular entities in the polymer network will open new opportunities in the field of chemically responsive materials.

[2+3] Amide Cages by Oxidation of [2+3] Imine Cages – Revisiting Molecular Hosts for Highly Efficient Nitrate Binding

The pollution of groundwater with nitrate is a serious issue because nitrate can cause several diseases such as methemoglobinemia or cancer. Therefore, selective removal of nitrate by efficient binding to supramolecular hosts is highly desired. Here we describe how to make [2+3] amide cages in very high to quantitative yields by applying an optimized Pinnick oxidation protocol for the conversion of corresponding imine cages. By NMR titration experiments of the eight different [2+3] amide cages with nitrate, chloride and hydrogen sulfate we identified one cage with an unprecedented high selectivity towards nitrate binding vs. chloride (S=705) or hydrogensulfate (S>13500) in CD₂Cl₂/CD₃CN (1 : 3). NMR experiments as well as single‐crystal structure comparison of host‐guest complexes give insight into structure‐property‐relationships.

Calix[4]pyrrole-Based Molecular Capsule: Dihydrogen Phosphate-Promoted 1:2 Fluoride Anion Complexation

A molecular capsule (1) consisting of two calix[4]pyrroles connected via ethylene diamide linkers has been prepared as an anion receptor. ¹H NMR spectroscopic studies carried out in CD₂Cl₂ revealed that receptor 1 recognizes a variety of anions with different binding modes and stoichiometries. For instance, receptor 1 binds fluoride and acetate with 1:2 receptor/anion stoichiometry and other test anions with 1:1 stoichiometry in solution when their respective tetrabutylammonium (TBA⁺) salts were used. In contrast, with tetraethylammnium (TEA⁺) salts, receptor 1 forms 1:2 complexes with chloride and bromide in addition to fluoride, overcoming expected Columbic repulsions between the anions co-bound in close proximity. Receptor 1 is also able to bind oxoanions, such as oxalate (C₂O₄^2-), dihydrogen phosphate (H₂PO₄^-), sulfate (SO₄^2-), and hydrogen pyrophosphate (HP₂O₇^3-), in the form of 1:1 complexes as the result of presumed cooperation between the two calix[4]pyrrole subunits. The selectivity of receptor 1 for fluoride versus dihydrogen phosphate varies depending on their relative concentrations. For instance, in the presence of less than 1.0 equiv of an equimolar mixture of fluoride and dihydrogen phosphate, receptor 1 shows high selectivity for dihydrogen phosphate. In contrast, in the presence of ≥2.0 anion equiv, receptor 1 binds fluoride preferentially, forming a 1:2 complex. Moreover, when treated with F^-, the preformed 1:1 H₂PO₄^- complex of receptor 1 is converted to the corresponding 1:2 receptor/fluoride complex with the release of the prebound dihydrogen phosphate anion. As inferred from gas-phase computations, this seemingly counterintuitive behavior is rationalized in terms of the precomplexed dihydrogen phosphate serving to reduce the reorganization energy required to bind two fluoride anions. The presence of a water molecule in addition to the bound fluoride anions may also favor the formation of the 1:2 F^- complex. The present study provides a new approach for fine-tuning the binding selectivity of polytopic anion receptors.

Achieving Selectivity for Phosphate over Pyrophosphate in Ethanol with Iron(III)-Based Fluorescent Probes

Two iron(III)-based molecular receptors employing 1,2-hydroxypyridinone ligands were developed for phosphate recognition and fluorescence sensing via indicator displacement assay (IDA). The tetra- and pentadentate ligands enable anion recognition by the iron(III) center via its remaining one or two open coordination sites. Weak protective coordination of fluorescein at those sites prevents the formation of μ-oxo dimers in aerated solutions. Its rapid and selective displacement by inorganic phosphate results in a 20-fold increase in the fluorescence of the indicator. Both receptors exhibit high affinity for inorganic phosphate and high selectivity over common competing anions, including halides, acetate, carbonate, and, remarkably, pyrophosphate as well as arsenate. Coordination of phosphate to the iron(III) center was confirmed by ATR-IR and ³¹P NMR spectroscopy.

Imidazolium-Modified Bispyrene-Based Fluorescent Aggregates for Discrimination of Multiple Anions in Aqueous Solution

A great number of anions exist in biological systems and natural environment, and are highly relevant to human health and environment quality. It is necessary to develop simple and effective sensors to differentiate and identify those similar or different anions. Here, an imidazolium-modified bispyrene-based fluorescent amphiphilic probe DPyDIM was synthesized and its aggregates were applied to detect and discriminate various anions. The fluorescent aggregates exhibit ratiometric responses to different types of anions. Moreover, the ratiometric responses to different types of anions are featured with multiple-wavelength cross-reactivity. The collection of fluorescence variation at four typical wavelengths can generate distinct recognition patterns to specific anions. The heat map and principal component analysis results verify that this single fluorescent sensor system can effectively and sensitively identify 16 kinds of anions that belong to phosphorus-containing, sulfur-containing anions, and anionic surfactants. The cross-reactive sensing of the amphiphilic fluorescent aggregates was attributed to the different influences on the aggregation behaviors of the probes by different anions. The present work provides a promising strategy for effective detection and discrimination of multiple anions by employing dynamic fluorescent aggregates as a sensing platform.