Matrix solid-phase dispersion combined with gas chromatography–mass spectrometry for the determination of fifteen halogenated flame retardants in mollusks

Efficient Validation Strategies in Environmental Analytical Chemistry: A Focus on Organic Micropollutants in Water Samples

This article critically reviews analytical method validation and quality control applied to the environmental chemistry field. The review focuses on the determination of organic micropollutants (OMPs), specifically emerging contaminants and pesticides, in the aquatic environment. The analytical technique considered is (gas and liquid) chromatography coupled to mass spectrometry (MS), including high-resolution MS for wide-scope screening purposes. An analysis of current research practices outlined in the literature has been performed, and key issues and analytical challenges are identified and critically discussed. It is worth emphasizing the lack of specific guidelines applied to environmental analytical chemistry and the minimal regulation of OMPs in waters, which greatly affect method development and performance, requirements for method validation, and the subsequent application to samples. Finally, a proposal is made for method validation and data reporting, which can be understood as starting points for further discussion with specialists in environmental analytical chemistry.

Approaches to determine pesticides in marine bivalves

Due to agricultural runoff, pesticides end up in aquatic ecosystems and some accumulate in marine bivalves. As filter feeders, bivalves can accumulate high concentrations of chemicals in their tissue representing a potential risk to the health of human and aquatic ecosystems. So far, most of the studies dealing with pesticide contamination in marine bivalves, for example, in the French Atlantic and English Channel coasts, have focused on the old generation of pesticides. Only a few investigated the newly emerging pesticides partly due to methodological challenges. A better understanding of the most sensitive and reliable methods is thus essential for accurately determining a wide variety of environmentally relevant pesticides in marine bivalves. The review highlighted the use of more environmentally friendly and efficient materials such as sorbents and the "quick easy cheap effective rugged safe" extraction procedure to extract pesticides from bivalve matrices, as they appeared to be the most efficient while being the safest. Moreover, this method combined with the high-resolution mass spectrometry (MS) technique offers promising perspectives by highlighting a wide range of pesticides including those that are not usually sought. Finally, recent developments in the field of ultra-high-performance liquid chromatography coupled to MS, such as two-dimensional chromatography and ion mobility spectrometry, will improve the analysis of pesticides in complex matrices.

Analysis, occurrence and removal efficiencies of organophosphate flame retardants (OPFRs) in sludge undergoing anaerobic digestion followed by diverse thermal treatments

Organophosphate flame retardants (OPFRs) are a complex group of contaminants to deal with in sewage sludge, as currently there is a lack of robust analytical methods to measure them and management strategies to remove them. To facilitate quantifications of the occurrence of OPFRs in sludge and to establish their removal efficiencies (REs%) during thermal treatments, a simple, reliable, and rapid sample preparation methodology was developed for the determination of 21 OPFRs in diverse sludge, ash and biochar matrices. Matrix-solid phase dispersion (MSPD) tailored to ultra-performance liquid chromatography (UPLC) coupled to tandem mass spectrometry (MS/MS) was applied. Under optimal conditions, 0.5 g of freeze-dried sample were dispersed in 2 g of Bondesil C₁₈, and 1.5 g of deactivated florisil were used as clean-up sorbent. The target analytes were extracted with 5 mL of acetone. The obtained extract was ready for analysis within 20 min without the need of any further treatment. The proposed methodology was assessed, providing absolute recoveries (Abs%) ranging from 50.4 to 112 % with good method repeatability (RSDs <17.9 %). Method limits of quantification ranged from 0.10 to 14.0 ng g^-1 dry weight (d.w.). The optimized methodology was applied to raw-, digested-, combusted and pyrolyzed sludge samples collected from different waste treatment plants located in Norway, where 16 out of 21 OPFRs were detected in digested sludge samples up to 2186 ng g^-1 (d.w.; sum concentration of OPFRs). Diverse thermal treatments of combustion and dry pyrolysis were assessed for the removal of OPFRs from sludge. Combustion at 300 °C reduced the concentrations of OPFRs by 98 % (in the ashes formed), whereas pyrolysis at temperatures >500 °C effectively removed the OPFRs in the produced biochar. Thermal treatments, in particularly dry pyrolysis, showed potential for achieving zero pollution management and recycling of OPFR contaminated sludge.

Development and application of an in-house library and workflow for gas chromatography-electron ionization-accurate-mass/high-resolution mass spectrometry screening of environmental samples

This work presents an optimized gas chromatography–electron ionization–high-resolution mass spectrometry (GC-EI-HRMS) screening method. Different method parameters affecting data processing with the Agilent Unknowns Analysis SureMass deconvolution software were optimized in order to achieve the best compromise between false positives and false negatives. To this end, an accurate-mass library of 26 model compounds was created. Then, five replicates of mussel extracts were spiked with a mixture of these 26 compounds at two concentration levels (10 and 100 ng/g dry weight in mussel, 50 and 500 ng/mL in extract) and injected in the GC-EI-HRMS system. The results of these experiments showed that accurate mass tolerance and pure weight factor (combination of reverse-forward library search) are the most critical factors. The validation of the developed method afforded screening detection limits in the 2.5–5 ng range for passive sampler extracts and 1–2 ng/g for mussel sample extracts, and limits of quantification in the 0.6–3.2 ng and 0.1–1.8 ng/g range, for the same type of samples, respectively, for 17 model analytes. Once the method was optimized, an accurate-mass HRMS library, containing retention indexes, with ca. 355 spectra of derivatized and non-derivatized compounds was generated. This library (freely available at https://doi.org/10.5281/zenodo.5647960), together with a modified Agilent Pesticides Library of over 800 compounds, was applied to the screening of passive samplers, both of polydimethylsiloxane and polar chemical integrative samplers (POCIS), and mussel samples collected in Galicia (NW Spain), where a total of 75 chemicals could be identified.

Exploring the environmental fate of novel brominated flame retardants in a sediment-water-mudsnail system: Enrichment, removal, metabolism and structural damage

Novel brominated flame retardants (NBFRs) are now ubiquitous in the environment with the extensive production and application. In the present study, pentabromotoluene (PBT), hexabromobenzene (HBB) and decabromodiphenyl ethane (DBDPE) were spiked into the sediments where mudsnails (Bellamya aeruginosa) were cultivated. In the 35-day enrichment process, the highest concentration of the three NBFRs measured in mudsnail is 2.0 mg/kg, 22 mg/kg and 5.2 mg/kg dry weight (dw), respectively. The average enrichment of NBFRs in viscera was about 3 times of pleopod with the same mass. Meanwhile, the parent mudsnails can transfer NBFRs to their offspring. The removal half-life of the three NBFRs was in the range of 2.6 and 5.7 days according to the first-order kinetic equation. Several degradation products of the NBFRs were detected in mudsnail samples, which were exposed to single substance. 2,4,6-tribromotoluene was identified as degradation product of PBT; 1,2,4,5-tetrabromobenzene and 1,2,4-tribromobenzene were identified as debromination products of HBB. Possible degradation pathways were further proposed. Additionally, mudsnails after exposed to 50 mg/kg of NBFRs were observed under a scanning electron microscope, indicating that shrinkage, tissue hyperplasia and perforation occurred on the visceral surface. Such damage might be related to the accumulation of more pollutants in mudsnails viscera. As one of the few studies to explore the biological process of NBFRs, our observation could provide a scientific basis for evaluating the environmental risks of NBFRs to benthic organisms.

Legacy and emerging pollutants in marine bivalves from the Galician coast (NW Spain)

The presence of pollutants in estuary and oceanic systems is a global problem and a serious concern to human and environmental health. Usually, environmental monitoring studies consider classical persistent organic pollutants (POPs). However, the lists of POPs keep continuously growing and new POPs and other emerging pollutants should be considered in new monitoring programs. So, this study aimed to investigate the distribution and profile of classical POPs (polychlorinated biphenyl (PCBs), organochlorine pesticides (OCPs), and polycyclic aromatic hydrocarbons (PAHs)), new POPs and emerging pollutants (polybrominated diphenyl ethers (PBDEs), perfluorinated compounds (PFCs), novel halogenated flame retardants (NFRs) and UV filters) in bivalve mollusc samples (both raft-cultivated and wild mussel, Mytilus galloprovincialis; cockle, Cerestoderma edule; and clam, Ruditapes descussatus) collected in nine Galician Rias during the period February 2012 to February 2013. A predominance of PAHs (6.8-317 ng/g dry weight (dw)) followed by PCBs (0.47-261 ng/g dw), UV filters (1.4-157 ng/g dw), PFCs (0.53-62 ng/g dw), OCPs (0.07-29 ng/g dw), PBDEs (0.31-6.6 ng/g dw) and NFRs (0.07-3.2 ng/g dw) was found in the studied bivalves, being the UV filter octocrylene the compound found at the highest concentration (141 ng/g dw in a cockle sample), while the PAHs chrysene and benzo(b)fluoranthene were the compounds with the highest average concentration (20 and 14 ng/g dw, respectively). Inter-species, temporal and geographical variations on pollutants concentration were assessed by multifactorial analysis of variance. Statistically significant differences among the type of mollusc were observed for levels of organochlorinated and organobrominated pollutants considered (PCBs, OCPs and PBDEs), which were detected at higher concentrations in wild mussel. On the other hand, the main PFCs and UV filters showed a higher detection frequency in cockle samples. Location played significant role for PAHs, PCBs and the main PBDEs, being the most polluted rias those more industrialized and populated, i.e. A Coruña, Ferrol and/or Vigo. Finally, sampling timepoint was also a significant factor for most of the families considered but with different profiles. Thus, PAHs and PCBs showed higher concentrations in both February 2012 and 2013 and lower in August 2012, while the main PBDEs were measured at higher concentrations in November 2012 and lower in February 2012; and the main NFRs, PFCs and UV filters were present at lower levels in February 2013.

Polybrominated diphenyl ethers and alternative halogenated flame retardants in mollusks from the Chinese Bohai Sea: Levels and interspecific differences

Polybrominated diphenyl ethers (PBDEs) and alternative halogenated flame retardants (AHFRs) were measured in eleven mollusk species collected from the Chinese Bohai Sea. PBDEs and AHFRs were detected in all species, and their average total concentrations were in the range of 22.5-355 and 10.0-84.3 ng/g lipid weight, respectively. Decabromodiphenyl ether (BDE-209) and decabromodiphenylethane (DBDPE) were the dominant halogenated flame retardants (HFRs), contributing 22.5% to 73.6% and 3.1% to 38.3% of the total HFRs, respectively. The levels of PBDEs and AHFRs were moderate to high from a global perspective. Interspecific differences in the accumulation of PBDEs and AHFRs were characterized by heat map and cluster analysis. Composition profile differences were also observed, with higher proportions of AHFRs in gastropods than in bivalves. These species-specific differences in concentrations and profiles in mollusks were attributed to different species traits, including feeding habit, trophic level, and metabolic potential.

Characterization of brominated, chlorinated, and phosphate flame retardants in San Francisco Bay, an urban estuary

Flame retardant chemical additives are incorporated into consumer goods to meet flammability standards, and many have been detected in environmental matrices. A uniquely wide-ranging characterization of flame retardants was conducted, including polybrominated diphenyl ethers (PBDEs) and 52 additional brominated, chlorinated, or phosphate analytes, in water, sediment, bivalves, and harbor seal blubber of San Francisco Bay, a highly urbanized estuary once considered a hot spot for PBDE contamination. Among brominated flame retardants, PBDEs remained the dominant contaminants in all matrices, though declines have been observed over the last decade following their phase-out. Hexabromocyclododecane (HBCD) and other hydrophobic, brominated flame retardants were commonly detected at lower levels than PBDEs in sediment and tissue matrices. Dechlorane Plus (DP) and related chlorinated compounds were also detected at lower levels or not at all across all matrices. In contrast, phosphate flame retardants were widely detected in Bay water samples, with highest median concentrations in the order TCPP > TPhP > TBEP > TDCPP > TCEP. Concentrations in Bay water were often higher than in other estuarine and marine environments. Phosphate flame retardants were also widely detected in sediment, in the order TEHP > TCrP > TPhP > TDCPP > TBEP. Several were present in bivalves, with levels of TDCPP comparable to PBDEs. Only four phosphate flame retardants were detected in harbor seal blubber: TCPP, TDCPP, TCEP, and TPhP. Periodic, multi-matrix screening is recommended to track contaminant trends impacted by changes to flammability standards and manufacturing practices, with a particular focus on contaminants like TDCPP and TPhP that were found at levels comparable to thresholds for aquatic toxicity.

Synthetic Phenolic Antioxidants and Their Metabolites in Mollusks from the Chinese Bohai Sea: Occurrence, Temporal Trend, and Human Exposure

Synthetic phenolic antioxidants (SPAs) are a group of chemicals widely used in various daily necessities and industrial supplies. Little is known about the occurrence and bioaccumulation potential of SPAs in marine biota. In this study, five commonly used SPAs and their four metabolites were detected in mollusk samples ( n = 274) collected from the Chinese Bohai Sea during 2006-2016 and the spatiotemporal distribution and bioaccumulation of SPAs in mollusks were examined. The concentrations of 2,6-di- tert-butyl-4-hydroxytoluene (BHT) ranged from 383 to 501000 ng/g (geometric mean: 3450 ng/g), accounting for 79.4% of the total concentrations of SPAs and their metabolites (∑₉SPAs). The mollusk species, Rapana venosa (RAP), contained higher levels of BHT than other species, suggesting that Rap could be used as a potential bioindicator for monitoring of the BHT pollution in the investigated region. The ∑₉SPAs concentrations in mollusks gradually increased with years and a significant positive correlation ( r = 0.900, p < 0.05) was found between ∑₉SPAs concentration and trophic level of the mollusks. The trophic magnification factor value of ∑₉SPAs was calculated as 16.1, suggesting a high biomagnification potential of SPAs in mollusks in the Chinese Bohai Sea. The estimated daily intake of ∑₉SPAs through dietary ingestion of mollusks was up to 602 and 789 ng/kg bw/day for adults and children and teenagers, respectively. The principal component analysis result suggests that there exists a common source for three gallates (OG, DG, and PG), and BHT metabolites in mollusks were mainly derived from degradation of BHT. This is the first study to report the occurrence and bioaccumulation potentials of SPAs and their metabolites in invertebrate species from coastal marine environments.

Temporal Trends of Parabens and Their Metabolites in Mollusks from the Chinese Bohai Sea during 2006-2015: Species-Specific Accumulation and Implications for Human Exposure

Parabens are used as preservatives in many consumer products, and human exposure to these chemicals has been a public concern. In this study, mollusks ( n = 186), collected from the Chinese Bohai Sea during 2006-2015, were analyzed for six parabens and their five metabolites. The total concentration of parabens was in the range of 2.66-299 ng/g dw (geometric mean: 24.1). Methyl paraben and 4-hydroxybenzoic acid were the predominant parent and metabolic parabens, respectively found in mollusks. Mollusk species, Mactra veneriformis, Mytilus edulis, and Cyclina sinensis contained elevated concentrations of both parent and metabolic parabens. A gradual increase in paraben concentrations was found in mollusks collected between 2006 and 2012. Principal component analysis suggested the existence of a common source for these chemicals in mollusks. Consumption of mollusks can contribute to human exposures and we estimated daily intakes of parabens through the consumption of mollusks. This is the first study to report temporal trends and accumulation of parabens and their metabolites in a variety of invertebrate species from coastal marine environments.

Halogenated and organophosphorus flame retardants in European aquaculture samples

This work monitors flame retardants in sediment, mussel and water samples from European fish farms. Polybrominated diphenyl ethers (PBDEs) were detected in 95% of the sediment and mussel samples with mean levels of 8.60±22.6ngg^-1 dw in sediments and 0.07±0.18ngg^-1 dw in mussels. BDE-209 was the main contributor for the sediments and BDE-47 was found in about 60% of the samples of both matrices. Pentabromoethylbenzene (PBEB) and hexabromobenzene (HBB) were detected in 42% of the sediments, but not in mussels. Decabromodiphenyl ethane (DBDPE) was found in about 55% of the samples of both matrices. The same happened for dechloranes in mussels, but they were detected in 92% of the sediments. Syn-DP and anti-DP were always the main contributors. Methoxylated PBDEs (MeO-PBDEs) were detected in all mussels and some sediments, mainly 6-MeO-BDE-47 and 2'-MeO-BDE-68. Organophosphorus flame retardants (OPFRs) were found in all matrices with concentrations of 0.04-92.8ngg^-1 dw in sediment, 0.50-102ngg^-1 dw in mussel and 0.43-867ngl^-1 in water. Only OPFRs were analysed in water samples as halogenated flame retardants and MeO-PBDEs are highly unlikely to be detected in water due to their physicochemical properties. Flame retardants have no application in fish farming so results should reflect the impact of human activity on the farm locations. A large majority of the most contaminated samples were collected from sampling spots that were at urban shores or in enclosed water bodies not completely open to the sea.

Dechlorane Plus induces oxidative stress and decreases cyclooxygenase activity in the blue mussel

Dechlorane Plus (DP) is a chlorinated flame retardant used mainly in electrical wire and cable coating, computer connectors, and plastic roofing materials. Concentrations of DP (syn and anti isomers) are increasingly being reported in aquatic ecosystems worldwide. However, there is exceedingly little information on the exposure-related toxicity of DP in aquatic organisms, especially in bivalves. The objective of this study was to investigate the in vivo and in vitro effects of DP exposure on histopathology, lipid peroxidation (LPO) levels, cyclooxygenase (COX) activity, phagocytosis capacity and efficiency, and DNA strand breakage in the blue mussel (Mytilus edulis) following a 29days exposure (0.001, 0.01, 0.1 and 1.0μg DP/L). Blue mussels accumulated DP in muscle and digestive gland in a dose-dependent manner. LPO levels in gills were found to increase by 82% and 67% at the 0.01 and 1.0μg DP/L doses, respectively, while COX activity in gills decreased by 44% at the 1μg/L dose. No histopathological lesion was found in gonads following DP exposure. Moreover, no change in hemocyte DNA strand breakage, phagocytosis rate, and viability was observed following DP exposure. Present study showed that toxicity of DP may occur primarily via oxidative stress in the blue mussel and potentially other bivalves, and that gills represent the most responsive tissue to this exposure.

State of the art of environmentally friendly sample preparation approaches for determination of PBDEs and metabolites in environmental and biological samples: A critical review

Green chemistry principles for developing methodologies have gained attention in analytical chemistry in recent decades. A growing number of analytical techniques have been proposed for determination of organic persistent pollutants in environmental and biological samples. In this light, the current review aims to present state-of-the-art sample preparation approaches based on green analytical principles proposed for the determination of polybrominated diphenyl ethers (PBDEs) and metabolites (OH-PBDEs and MeO-PBDEs) in environmental and biological samples. Approaches to lower the solvent consumption and accelerate the extraction, such as pressurized liquid extraction, microwave-assisted extraction, and ultrasound-assisted extraction, are discussed in this review. Special attention is paid to miniaturized sample preparation methodologies and strategies proposed to reduce organic solvent consumption. Additionally, extraction techniques based on alternative solvents (surfactants, supercritical fluids, or ionic liquids) are also commented in this work, even though these are scarcely used for determination of PBDEs. In addition to liquid-based extraction techniques, solid-based analytical techniques are also addressed. The development of greener, faster and simpler sample preparation approaches has increased in recent years (2003-2013). Among green extraction techniques, those based on the liquid phase predominate over those based on the solid phase (71% vs. 29%, respectively). For solid samples, solvent assisted extraction techniques are preferred for leaching of PBDEs, and liquid phase microextraction techniques are mostly used for liquid samples. Likewise, green characteristics of the instrumental analysis used after the extraction and clean-up steps are briefly discussed.

Concentrations, bioaccumulation, and human health risk assessment of organochlorine pesticides and heavy metals in edible fish from Wuhan, China

The objective of this study was to determine concentration and bioaccumulation of organochlorine pesticides and heavy metals in edible fish from Wuhan, China, in order to assess health risk to the human via fish consumption. Two edible fish species (Aristichthys nobilis and Hypophthalmichthys molitrix) were collected and analyzed for 11 organochlorine pesticides (OCPs) and eight heavy metals (HMs). Concentrations of ∑HCHs, ∑DDTs, and ∑OCPs in fish samples were in the range of 0.37-111.20, not detected (nd)-123.61, and 2.04-189.04 ng g(-1) (wet weight), respectively. Bioaccumulation factors (BAFs) of OCPs in bighead carp (A. nobilis) were higher than those in silver carp (H. molitrix). Concentrations of ∑HMs in bighead carp and silver carp were 352.48 and 345.20 mg kg(-1) (dw), respectively. Daily exposure of OCPs and HMs for consumers was estimated by comparing estimated daily intake (EDI) with different criteria. The results revealed that the EDIs in our study were all lower than those criteria. Target hazard quotient (THQ) and risk ratio (R) were used to evaluate non-carcinogenic and carcinogenic risks, respectively. As regard to non-carcinogenic effects of the contaminants, hazard quotients (THQ) of OCPs and HMs were both lower than 1.0, implying negligible non-carcinogenic risk via fish consumption in study area. Nevertheless, in view of carcinogenic effects of the contaminants, the total value of risk ratio (R) of OCPs was lower than the threshold of tolerable risk while the total value of risk ratio (R) of HMs was higher than the threshold of tolerable risk due to the high carcinogenic risk ratios of As and Cr, indicating high carcinogenic risks via fish consumption. The results demonstrated that HMs in edible fish from Wuhan, China, especially As and Cr required more attention than OCPs.

Marine natural products

This review covers the literature published in 2013 for marine natural products (MNPs), with 982 citations (644 for the period January to December 2013) referring to compounds isolated from marine microorganisms and phytoplankton, green, brown and red algae, sponges, cnidarians, bryozoans, molluscs, tunicates, echinoderms, mangroves and other intertidal plants and microorganisms. The emphasis is on new compounds (1163 for 2013), together with the relevant biological activities, source organisms and country of origin. Reviews, biosynthetic studies, first syntheses, and syntheses that lead to the revision of structures or stereochemistries, have been included.

Tracing endocrine disrupting chemicals in a coastal lagoon (Sacca di Goro, Italy): sediment contamination and bioaccumulation in Manila clams

The Water Framework Directive, recently amended with new priority substances (2013/39/EU), is meant to regulate the health status of European aquatic environments, including transitional waters. Despite the ecological and economic importance of transitional water bodies and, in particular, of coastal lagoons, a relevant example of this type of environments, little is known about their contamination by priority substances, particularly by endocrine disrupting chemicals (EDCs). In this study, a wide array of priority substances, all with recognised disrupting properties, was investigated in the Sacca di Goro Lagoon (Adriatic Sea, Italy), which receives freshwater from the Po River after draining the most urbanised and industrialised Italian regions. Flame retardants, alkylphenols, bisphenol A, natural and synthetic steroids, personal care products and legacy pollutants were investigated both in sediments and in the clam Ruditapes philippinarum collected from three sites in the lagoon. Sediments showed that most of the chemicals analysed could reach the lagoon ecosystem but their concentrations were below existing quality guidelines. Clams essentially reflected this condition although some concern was raised by polybrominated diphenyl ethers (PBDEs): the limit for the sum of six congeners set for biota in the European Directive (2013/39/EU) to protect human health was exceeded 4-5 times. No significant biota-sediment accumulation factors (BSAFs) were calculated. Nonylphenol, tonalide, PBDE, polychlorinated biphenyls and bisphenol A were the most abundant chemicals in clam tissues.

Matrix solid-phase dispersion of polybrominated diphenyl ethers and their hydroxylated and methoxylated analogues in lettuce, carrot and soil

In the present work, a novel analytical method for the simultaneous determination of ten polybrominated diphenyl ethers (PBDEs), eight methoxylated PBDEs (MeO-PBDEs) and seven hydroxylated PBDEs (OH-PBDEs) in soil, lettuce and carrot samples was developed. The procedure was based on matrix solid-phase dispersion (MSPD) followed by gas chromatography coupled to negative chemical ionization-mass spectrometry (GC-NCI-MS). Under optimum conditions, 0.5g of sample (freeze-dried in the case of lettuce and carrot samples) was dispersed with 0.5g of octadecyl-functionalized silica (C18) and 1.75g of acidified silica (10% H2SO4, w/w) was used as clean-up sorbent. A two-step fractionated elution was carried out. First, PBDEs and MeO-PBDEs were eluted in 75:25% (v/v) n-hexane/dichloromethane mixture and, then, the retained OH-PBDEs were eluted in pure dichloromethane. Both extracts were analyzed by GC-NCI-MS separately, in the case of OH-PBDEs after derivatization with N-methyl-N-(trimethylsilyl) trifluoroacetamide. The developed method was validated in terms of accuracy for soil, lettuce and carrot matrices, spiked at two fortification levels (5 and 25ngg(-1)). After correction with the corresponding surrogate, apparent recovery values (defined as the recovery obtained after correction with the corresponding surrogate) were in the 80-129% range. Precision (as relative standard deviation) in the 1-21% range and method detection limits (MDLs) in the 0.003 and 0.3ngg(-1) range for soil and in the 0.003-0.4ngg(-1) range (dry weight) for lettuce and carrot samples were obtained. For PBDEs the method was also validated with a standard reference material (SRM-2585) of house dust. Finally, the method was applied for the determination of target analytes in soil, lettuce and carrot.

Bioanalytical chromatographic method validation according to current regulations, with a special focus on the non-well defined parameters limit of quantification, robustness and matrix effect

Method validation is a mandatory step in bioanalysis, to evaluate the ability of developed methods in providing reliable results for their routine application. Even if some organisations have developed guidelines to define the different parameters to be included in method validation (FDA, EMA); there are still some ambiguous concepts in validation criteria and methodology that need to be clarified. The methodology to calculate fundamental parameters such as the limit of quantification has been defined in several ways without reaching a harmonised definition, which can lead to very different values depending on the applied criterion. Other parameters such as robustness or ruggedness are usually omitted and when defined there is not an established approach to evaluate them. Especially significant is the case of the matrix effect evaluation which is one of the most critical points to be studied in LC-MS methods but has been traditionally overlooked. Due to the increasing importance of bioanalysis this scenario is no longer acceptable and harmonised criteria involving all the concerned parties should be arisen. The objective of this review is thus to discuss and highlight several essential aspects of method validation, focused in bioanalysis. The overall validation process including common validation parameters (selectivity, linearity range, precision, accuracy, stability…) will be reviewed. Furthermore, the most controversial parameters (limit of quantification, robustness and matrix effect) will be carefully studied and the definitions and methodology proposed by the different regulatory bodies will be compared. This review aims to clarify the methodology to be followed in bioanalytical method validation, facilitating this time consuming step.