Micro extraction by packed sorbent coupled to liquid chromatography tandem mass spectrometry for the rapid and sensitive determination of cannabinoids in oral fluids

Recent advances in the chromatographic analysis of endocannabinoids and phytocannabinoids in biological samples

Endocannabinoid system, including endocannabinoid neurotransmitters (eCBs), has gained much attention over the last years due to its involvement with the pathophysiology of diseases and the potential use of Cannabis sativa (marijuana). The identification of eCBs and phytocannabinoids in biological samples for forensic, clinical, or therapeutic drug monitoring purposes constitutes a still significant challenge. In this scoping review, the recent advantages, and limitations of the eCBs and phytocannabinoids quantification in biological samples are described. Published studies from 2018-2023 were searched in 8 databases, and after screening and exclusions, the selected 38 articles had their data tabulated, summarized, and analyzed. The main characteristics of the eCBs and phytocannabinoids analyzed and the potential use of each biological sample were described, indicating gaps in the literature that still need to be explored. Well-established and innovative sample preparation protocols, and chromatographic separations, such as GC, HPLC, and UHPLC, are reviewed highlighting their respective advantages, drawbacks, and challenges. Lastly, future approaches, challenges, and tendencies in the quantification analysis of cannabinoids are discussed.

Coupling Miniaturized Stir Bar Sorptive Dispersive Microextraction to Needle-Based Electrospray Ionization Emitters for Mass Spectrometry: Determination of Tetrahydrocannabinol in Human Saliva as a Proof of Concept

Direct coupling of sample preparation with mass spectrometry (MS) can speed up analysis, enabling faster decision-making. In such combinations, where the analysis time is mainly defined by the extraction procedure, magnetic dispersive solid-phase extraction emerges as a relevant technique because of its rapid workflow. The dispersion and retrieval of the magnetic sorbent are typically uncoupled stages, thus reducing the potential simplicity. Stir bar sorptive dispersive microextraction (SBSDME) is a novel technique that integrates both stages into a single device. Its miniaturization (mSBSDME) makes it more portable and compatible with low-availability samples. This article reports the direct combination of mSBSDME and MS using a needle-based electrospray ionization (NESI) emitter as the interface. This combination is applied to determine tetrahydrocannabinol in saliva samples, a relevant societal problem if the global consumption rates of cannabis are considered. The coupling requires only the transference of the magnet (containing the sorbent and the isolated analyte) from the mSBSDME to the hub of a hypodermic needle, where the online elution occurs. The application of 5 kV on the needle forms an electrospray on its tip, transferring the ionized analyte to the MS inlet. The excellent performance of mSBSDME-NESI-MS/MS relies on the sensitivity (limits of detection as low as 2.25 ng mL-1), the precision (relative standard deviation lower than 15%), and the accuracy (relative recoveries ranged from 87 to 127%) obtained. According to the results, the mSBSDME-NESI-MS/MS technique promises faster and more efficient chemical analysis in MS-based applications.

Detection of Cannabinoids in Oral Fluid Specimens as the Preferred Biological Matrix for a Point-of-Care Biosensor Diagnostic Device

An increasing number of countries have started to decriminalize or legalize the consumption of cannabis for recreational and medical purposes. The active ingredients in cannabis, termed cannabinoids, affect multiple functions in the human body, including coordination, motor skills, memory, response time to external stimuli, and even judgment. Cannabinoids are a unique class of terpeno-phenolic compounds, with 120 molecules discovered so far. There are certain situations when people under the influence of cannabis may be a risk to themselves or the public safety. Over the past two decades, there has been a growing research interest in detecting cannabinoids from various biological matrices. There is a need to develop a rapid, accurate, and reliable method of detecting cannabinoids in oral fluid as it can reveal the recent intake in comparison with urine specimens, which only show a history of consumption. Significant improvements are continuously made in the analytical formats of various technologies, mainly concerning improving their sensitivity, miniaturization, and making them more user-friendly. Additionally, sample collection and pretreatment have been extensively studied, and specific devices for collecting oral fluid specimens have been perfected to allow rapid and effective sample collection. This review presents the recent findings regarding the use of oral fluid specimens as the preferred biological matrix for cannabinoid detection in a point-of-care biosensor diagnostic device. A critical review is presented, discussing the findings from a collection of review and research articles, as well as publicly available data from companies that manufacture oral fluid screening devices. Firstly, the various conventional methods used to detect cannabinoids in biological matrices are presented. Secondly, the detection of cannabinoids using point-of-care biosensors is discussed, emphasizing oral fluid specimens. This review presents the current pressing technological challenges and highlights the gaps where new technological solutions can be implemented.

SPME as a green sample-preparation technique for the monitoring of phytocannabinoids and endocannabinoids in complex matrices

The endocannabinoid system (ECS), particularly its signaling pathways and ligands, has garnered considerable interest in recent years. Along with clinical work investigating the ECS' functions, including its role in the development of neurological and inflammatory conditions, much research has focused on developing analytical protocols enabling the precise monitoring of the levels and metabolism of the most potent ECS ligands: exogenous phytocannabinoids (PCs) and endogenous cannabinoids (endocannabinoids, ECs). Solid-phase microextraction (SPME) is an advanced, non-exhaustive sample-preparation technique that facilitates the precise and efficient isolation of trace amounts of analytes, thus making it appealing for the analysis of PCs and ECs in complex matrices of plant and animal/human origin. In this paper, we review recent forensic medicine and toxicological studies wherein SPME has been applied to monitor levels of PCs and ECs in complex matrices, determine their effects on organism physiology, and assess their role in the development of several diseases.

The Determination of Cannabinoids in Urine Samples Using Microextraction by Packed Sorbent and Gas Chromatography-Mass Spectrometry

Cannabis is the most consumed illicit drug worldwide, and its legal status is a source of concern. This study proposes a rapid procedure for the simultaneous quantification of Δ9-tetrahydrocannabinol (THC), 11-hydroxy-Δ9-tetrahydrocannabinol (11-OH-THC), 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (THC-COOH), cannabidiol (CBD), and cannabinol (CBN) in urine samples. Microextraction by packed sorbent (MEPS) was used to pre-concentrate the analytes, which were detected by gas chromatography–mass spectrometry. The procedure was previously optimized, and the final conditions were: conditioning with 50 µL methanol and 50 µL of water, sample load with two draw–eject cycles, and washing with 310 µL of 0.1% formic acid in water with 5% isopropanol; the elution was made with 35 µL of 0.1% ammonium hydroxide in methanol. This fast extraction procedure allowed quantification in the ranges of 1–400 ng/mL for THC and CBD, 5–400 ng/mL for CBN and 11-OH-THC, and 10–400 ng/mL for THC-COOH with coefficients of determination higher than 0.99. The limits of quantification and detection were between 1 and 10 ng/mL using 0.25 mL of sample. The extraction efficiencies varied between 26 and 85%. This analytical method is the first allowing the for determination of cannabinoids in urine samples using MEPS, a fast, simple, and low-cost alternative to conventional techniques.

Automation System for the Flexible Sample Preparation for Quantification of Δ9-THC-D3, THC-OH and THC-COOH from Serum, Saliva and Urine

In the life sciences, automation solutions are primarily established in the field of drug discovery. However, there is also an increasing need for automated solutions in the field of medical diagnostics, e.g., for the determination of vitamins, medication or drug abuse. While the actual metrological determination is highly automated today, the necessary sample preparation processes are still mainly carried out manually. In the laboratory, flexible solutions are required that can be used to determine different target substances in different matrices. A suitable system based on an automated liquid handler was implemented. It has been tested and validated for the determination of three cannabinoid metabolites in blood, urine and saliva. To extract Δ9-tetrahydrocannabinol-D3 (Δ9-THC-D3), 11-hydroxy-Δ9-tetrahydrocannabinol (THC-OH) and 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (THC-COOH) from serum, urine and saliva both rapidly and cost-effectively, three sample preparation methods automated with a liquid handling robot are presented in this article, the basic framework of which is an identical SPE method so that they can be quickly exchanged against each other when the matrix is changed. If necessary, the three matrices could also be prepared in parallel. For the sensitive detection of analytes, protein precipitation is used when preparing serum before SPE and basic hydrolysis is used for urine to cleave the glucuronide conjugate. Recoveries of developed methods are >77%. Coefficients of variation are <4%. LODs are below 1 ng/mL and a comparison with the manual process shows a significant cost reduction.

A systematic review of quantitative analysis of cannabinoids in oral fluid

Cannabis sativa L. is a substance widely used around the world for recreational and medicinal purposes. Oral fluid has been investigated as an alternative biological matrix for demonstrating the illegal use of cannabis, particularly in situations where its recent use needs to be identified. In the last two decades, many methods have been developed to detect and quantify cannabinoids in oral fluid, especially for Δ⁹ -tetrahydrocannabinol, the primary psychoactive substance of cannabis. However, some aspects must be considered in the use of these techniques, such as cannabinoids recoveries or extraction efficiency from different oral fluid collection devices/containers. Pharmacokinetic studies have shown that the presence of minor cannabinoids and metabolites in the analysis of oral fluid may be valuable in interpreting tests, which indicates the need to improve the sensitivity of detecting low concentrations. The aim of this review is to summarize and to describe the methodologies for the quantitative analysis of cannabinoids in oral fluid that have previously been investigated. A systematic search for articles was performed of four different databases, using the descriptor "cannabinoids and oral fluid". Forty-seven studies that examined quantitative methods were identified. The analytical data described in these articles, including oral fluid collection, sample preparation, cannabinoids recovery and extraction efficiency, detection instruments, and quantification limits, were analyzed. The discussion of these particular features of cannabinoid analysis in oral fluid could help to improve or to develop methods for use in Forensic Toxicology.

Analysis of cannabinoids in conventional and alternative biological matrices by liquid chromatography: Applications and challenges

Cannabis is by far the most widely abused illicit drug globe wide. The analysis of its main psychoactive components in conventional and non-conventional biological matrices has recently gained a great attention in forensic toxicology. Literature states that its abuse causes neurocognitive impairment in the domains of attention and memory, possible macrostructural brain alterations and abnormalities of neural functioning. This suggests the necessity for the development of a sensitive and a reliable analytical method for the detection and quantification of cannabinoids in human biological specimens. In this review, we focus on a number of analytical methods that have, so far, been developed and validated, with particular attention to the new "golden standard" method of forensic analysis, liquid chromatography mass spectrometry or tandem mass spectrometry. In addition, this review provides an overview of the effective and selective methods used for the extraction and isolation of cannabinoids from (i) conventional matrices, such as blood, urine and oral fluid and (ii) alternative biological matrices, such as hair, cerumen and meconium.

Extraction of naturally occurring cannabinoids: an update

INTRODUCTION

Organic molecules that interact with the cannabinoid receptors are called cannabinoids, which can be endogenous, natural or synthetic compounds. They possess similar pharmacological properties as produced by the plant, Cannabis sativa L. Before cannabinoids can be analysed, they need to be extracted from the matrices.

OBJECTIVE

To review literature on the methods and protocols for the extraction of naturally occurring cannabinoids.

METHODOLOGY

An extensive literature search was performed incorporating several databases, notably, Web of Knowledge, PubMed and Google Scholar, and other relevant published materials. The keywords used in the search, in various combinations, with cannabinoids and extraction being present in all combinations, were Cannabis, hemp, cannabinoids, Cannabis sativa, marijuana, and extraction.

RESULTS

In addition to classical maceration with organic solvents, e.g. ethanol, pressurised solvent extraction, solvent heat reflux, Soxhlet extraction, supercritical fluid extraction, ultrasound-assisted extraction and microwave-assisted extraction, are routinely used nowadays for the extraction of cannabinoids from plant materials and cannabis consumer products. For the extraction of cannabinoids from biological samples, e.g. human blood, and also from food and beverages, and wastewater, solid-phase extraction and its variants, as well as liquid-liquid extraction are commonly used. Parameters for extraction can be optimised by response surface methodology or other mathematical modelling tools. There are at least six US patents on extraction of cannabinoids available to date.

CONCLUSIONS

Irrespective of the extraction method, extraction temperature, extraction time and extraction pressure play a vital role in overall yield of extraction. Solvent polarity can also be an important factor in some extraction methods.

A Rapid and Sensitive Method for the Determination of Cannabidiol in Cosmetic Products by Liquid Chromatography–Tandem Mass Spectrometry

Cannabidiol is a phytocannabinoid with proven pharmacological properties that is also used in the cosmetic industry for its sebostatic and antioxidant activities, being considered a new anti-aging ally. An analytical method is proposed for the determination of CBD in cosmetic products by liquid chromatography with tandem mass spectrometry, after leaching the CBD from the cosmetic matrix with ethanol. Low instrumental limits of detection (0.22 ng mL−1) and quantification (0.74 ng mL−1) allow the determination of CBD at trace levels without needing preconcentration, whereas the wide linearity of the method allows the determination of CBD in more concentrated samples without high dilution. The method was successfully applied to the analysis of six cosmetic products and a raw material. The proposed method is suitable for the quality control of cosmetic products containing CBD, being able to quickly and easily determine this compound, ensuring that its concentration in the finished product is the desired one.

Application of Microextraction-Based Techniques for Screening-Controlled Drugs in Forensic Context-A Review

The analysis of controlled drugs in forensic matrices, i.e., urine, blood, plasma, saliva, and hair, is one of the current hot topics in the clinical and toxicological context. The use of microextraction-based approaches has gained considerable notoriety, mainly due to the great simplicity, cost-benefit, and environmental sustainability. For this reason, the application of these innovative techniques has become more relevant than ever in programs for monitoring priority substances such as the main illicit drugs, e.g., opioids, stimulants, cannabinoids, hallucinogens, dissociative drugs, and related compounds. The present contribution aims to make a comprehensive review on the state-of-the art advantages and future trends on the application of microextraction-based techniques for screening-controlled drugs in the forensic context.

Cannabinoids: Recent Updates on Public Perception, Adverse Reactions, Pharmacokinetics, Pretreatment Methods and Their Analysis Methods

Cannabinoids (CBDs) have been traditionally used as a folk medicine. Recently, they have been found to exhibit a high pharmacological potential. However, they are addicted and are often abused by drug users, thereby, becoming a threat to public safety. CBDs and their metabolites are usually found in trace levels in plants or in biological matrices and, are therefore not easy to be detected. Advances have been made toward accurately analyzing CBDs in plants or in biological matrices. This review aims at elucidating on the consumption of CBDs as well as its adverse effects and to provide a comprehensive overview of CBD pretreatment and detection methods. Moreover, novel pretreatment methods such as microextraction, Quick Easy Cheap Effective Rugged Safe and online technology as well as novel analytic methods such as ion-mobility mass spectrometry, application of high resolution mass spectrometry in nontarget screening are summarized. In addition, we discuss and compare the strengths and weaknesses of different methods and suggest their future prospect.

Emerging challenges in the extraction, analysis and bioanalysis of cannabidiol and related compounds

Cannabidiol (CBD) is a bioactive terpenophenolic compound isolated from Cannabis sativa L. It is known to possess several properties of pharmaceutical interest, such as antioxidant, anti-inflammatory, anti-microbial, neuroprotective and anti-convulsant, being it active as a multi-target compound. From a therapeutic point of view, CBD is most commonly used for seizure disorder in children. CBD is present in both medical and fiber-type C. sativa plants, but, unlike Δ⁹-tetrahydrocannabinol (THC), it is a non-psychoactive compound. Non-psychoactive or fiber-type C. sativa (also known as hemp) differs from the medical one, since it contains only low levels of THC and high levels of CBD and related non-psychoactive cannabinoids. In addition to medical Cannabis, which is used for many different therapeutic purposes, a great expansion of the market of hemp plant material and related products has been observed in recent years, due to its usage in many fields, including food, cosmetics and electronic cigarettes liquids (commonly known as e-liquids). In this view, this work is focused on recent advances on sample preparation strategies and analytical methods for the chemical analysis of CBD and related compounds in both C. sativa plant material, its derived products and biological samples. Since sample preparation is considered to be a crucial step in the development of reliable analytical methods for the determination of natural compounds in complex matrices, different extraction methods are discussed. As regards the analysis of CBD and related compounds, the application of both separation and non-separation methods is discussed in detail. The advantages, disadvantages and applicability of the different methodologies currently available are evaluated. The scientific interest in the development of portable devices for the reliable analysis of CBD in vegetable and biological samples is also highlighted.

A review on the recent advances in HPLC, UHPLC and UPLC analyses of naturally occurring cannabinoids (2010-2019)

INTRODUCTION

Organic molecules that bind to cannabinoid receptors are called cannabinoids, and they have similar pharmacological properties like the plant, Cannabis sativa L. Hyphenated liquid chromatography (LC), incorporating high-performance liquid chromatography (HPLC) and ultra-performance liquid chromatography (UPLC, also known as ultrahigh-performance liquid chromatography, UHPLC), usually coupled to an ultraviolet (UV), UV-photodiode array (PDA) or mass spectrometry (MS) detector, has become a popular analytical tool for the analysis of naturally occurring cannabinoids in various matrices.

OBJECTIVE

To review literature on the use of various LC-based analytical methods for the analysis of naturally occurring cannabinoids published since 2010.

METHODOLOGY

A comprehensive literature search was performed utilising several databases, like Web of Knowledge, PubMed and Google Scholar, and other relevant published materials including published books. The keywords used, in various combinations, with cannabinoids being present in all combinations, in the search were Cannabis, hemp, cannabinoids, Cannabis sativa, marijuana, analysis, HPLC, UHPLC, UPLC, quantitative, qualitative and quality control.

RESULTS

Since 2010, several LC methods for the analysis of naturally occurring cannabinoids have been reported. While simple HPLC-UV or HPLC-UV-PDA-based methods were common in cannabinoids analysis, HPLC-MS, HPLC-MS/MS, UPLC (or UHPLC)-UV-PDA, UPLC (or UHPLC)-MS and UPLC (or UHPLC)-MS/MS, were also used frequently. Applications of mathematical and computational models for optimisation of different protocols were observed, and pre-analyses included various environmentally friendly extraction protocols.

CONCLUSIONS

LC-based analysis of naturally occurring cannabinoids has dominated the cannabinoids analysis during the last 10 years, and UPLC and UHPLC methods have been shown to be superior to conventional HPLC methods.

Microextraction on a screw

For the first time, a rapid, efficient, simple, and inexpensive approach for solid phase microextraction on a screw (MES) was developed. MES is a miniaturized form of solid-phase extraction without any backpressure. In this system, analytes were adsorbed on the surface of micro channels of a screw that was coated by polypyrrole (PPy). Based on this procedure, the analytes are adsorbed on the solid phase and then eluted by a desorption solvent. The MES method followed by gas chromatography-mass spectrometry (MES-GC-MS) was applied for the rapid extraction and determination of six polycyclic aromatic hydrocarbons (PAHs) (as model analytes) in well water samples. Several parameters affecting the extraction procedure, including the sampling flow rate, the number of the loading/desorption cycles of the sample, and the volume of the desorption solvent, were evaluated and optimized. Under optimum conditions, the detection limits for the PAHs varied between 0.5 and 1 μg L^-1 and linear ranges varied between 2 and 600 μg L^-1. The results showed good correlation coefficients (R > 0.99) for all of the analytes in the studied calibration range. The relative recovery (RR%) of the desired MES-GC-MS method for the studied PAHs was between 83.0 and 104.0% and the interday and intraday precision (n = 5 days), expressed as relative standard deviation (RSD %), were between 3.9-6.2% and 6.2-8.9%, respectively. To evaluate the matrix effect, the developed method was also applied for preconcentration and determination of the selected PAHs in real water samples, and good results were obtained.

Oral Fluid Drug Testing: Analytical Approaches, Issues and Interpretation of Results

With advances in analytical technology and new research informing result interpretation, oral fluid (OF) testing has gained acceptance over the past decades as an alternative biological matrix for detecting drugs in forensic and clinical settings. OF testing offers simple, rapid, non-invasive, observed specimen collection. This article offers a review of the scientific literature covering analytical methods and interpretation published over the past two decades for amphetamines, cannabis, cocaine, opioids, and benzodiazepines. Several analytical methods have been published for individual drug classes and, increasingly, for multiple drug classes. The method of OF collection can have a significant impact on the resultant drug concentration. Drug concentrations for amphetamines, cannabis, cocaine, opioids, and benzodiazepines are reviewed in the context of the dosing condition and the collection method. Time of last detection is evaluated against several agencies' cutoffs, including the proposed Substance Abuse and Mental Health Services Administration, European Workplace Drug Testing Society and Driving Under the Influence of Drugs, Alcohol and Medicines cutoffs. A significant correlation was frequently observed between matrices (i.e., between OF and plasma or blood concentrations); however, high intra-subject and inter-subject variability precludes prediction of blood concentrations from OF concentrations. This article will assist individuals in understanding the relative merits and limitations of various methods of OF collection, analysis and interpretation.

A review of drug abuse in recently reported cases of driving under the influence of drugs (DUID) in Asia, USA, and Europe

Driving Under the Influence of Drugs (DUID) is considered a serious issue related to the abuse of illegal drugs. DUID cases, including deaths, are being continuously reported in Asia, USA, and Europe. This literature review focuses on illegal drug abuse in recent DUID cases reported in Asia, USA, and Europe. To determine illegal drug abuse in DUID suspects, previous studies collected and analyzed biological samples, such as blood, urine, oral fluids, and hair. In addition, there were forensic autopsies and surveys for investigation of illegal drugs in DUID cases and drivers. In previous studies, ketamine, morphine, methamphetamine (MA), and khat were mainly reported in Asia, whereas amphetamine, benzodiazepines (BZDs), and cannabinoids were mainly reported in USA, and synthetic cannabinoids (SCs), opiates, and cocaine were mainly reported in Europe. Since DUID suspects related to illegal drugs have been frequently reported in Asia, USA, and Europe, there is a need to plan for national monitoring for drivers or motor vehicles to regulate and prevent drug abuse and relevant DUID cases.

Quantitation of Cannabinoids in Breath Samples Using a Novel Derivatization LC–MS/MS Assay with Ultra-High Sensitivity

As the legalization of medical and recreational marijuana use expands, measurement of tetrahydrocannabinol (THC) in human breath has become an area of interest. The presence and concentration of cannabinoids in breath have been shown to correlate with recent marijuana use and may be correlated with impairment. Given the low concentration of THC in human breath, sensitive analytical methods are required to further evaluate its utility and window of detection. This paper describes a novel derivatization method based on an azo coupling reaction that significantly increases the ionization efficiency of cannabinoids for LC–MS/MS analysis. This derivatization reaction allows for a direct derivatization reaction with neat samples and does not require further sample clean-up after derivatization, thus facilitating an easy and rapid “derivatize & shoot” sample preparation. The derivatization assay allowed for limits of quantitation (LOQ’s) in the sub-pg/mL to pg/mL range for the five cannabinoids in breath samples, i.e., only 5~50 femtograms of an analyte was required for quantitation in a single analysis. This ultrahigh sensitivity allowed for the quantitation of cannabinoids in all breath samples collected within 3 hours of smoking cannabis (n = 180). A linear correlation between THC and cannabinol (CBN) in human breath was observed, supporting the hypothesis that CBN is converted from THC during the combustion of cannabis. The derivatization method was also applied to the analysis of cannabinoids in whole blood samples, achieving LOQ’s at ten-pg/mL to sub-ng/mL level. This azo coupling-based derivatization approach provided the needed analytical sensitivity for the analysis of THC in human breath samples using LC–MS/MS and could be a valuable tool for the analysis of other aromatic compounds in the future.

Development of a new method for the analysis of cannabinoids in honey by means of high-performance liquid chromatography coupled with electrospray ionisation-tandem mass spectrometry detection

Fibre-type Cannabis sativa L. (hemp) represents a valuable resource in many different fields, including both the pharmaceutical and food ones. This plant contains non-psychoactive cannabinoids, a class of bioactive compounds biosynthesized in both female and male inflorescences. Among them, cannabidiol (CBD) is the most interesting compound from a medicinal point of view. Indeed, several scientific studies have proved its therapeutic potential in a large number of pathologies, in addition to its biological effects attributable to its antioxidant, neuroprotective and anti-inflammatory properties. The analysis of the amount of cannabinoids in food and food supplements represents a critical issue in the ambit of both the quality assurance and the dietary intake control of these biologically active compounds. In this ambit, a particular attention is necessary for apiary products, since they are widely consumed and they can be produced by bees starting from different floral sources. In the light of all the above, the aim of this study was to develop for the first time a new analytical method based on RP-HPLC with ESI-MS/MS detection for the determination of CBD and related cannabinoids in honey. A quick, easy, cheap, effective, rugged and safe (QuEChERS) extraction procedure with an un-buffered method was selected and optimised as the more suitable protocol. As regards detection, it was carried out by using a linear ion trap quadrupole (QTRAP) mass analyser, operated in the multiple reaction monitoring (MRM) mode. Hemp male inflorescences and pollen were analysed in parallel by means of HPLC-UV/DAD, since bees can transfer pollen into their hives and, consequently, into beehive products. The method developed and validated for the first time in this work was finally applied to the analysis of cannabinoids in honey samples, thus demonstrating to be a useful tool for both quality control and safety assurance.

Cannabis and Its Secondary Metabolites: Their Use as Therapeutic Drugs, Toxicological Aspects, and Analytical Determination

Although the medicinal properties of Cannabis species have been known for centuries, the interest on its main active secondary metabolites as therapeutic alternatives for several pathologies has grown in recent years. This potential use has been a revolution worldwide concerning public health, production, use and sale of cannabis, and has led inclusively to legislation changes in some countries. The scientific advances and concerns of the scientific community have allowed a better understanding of cannabis derivatives as pharmacological options in several conditions, such as appetite stimulation, pain treatment, skin pathologies, anticonvulsant therapy, neurodegenerative diseases, and infectious diseases. However, there is some controversy regarding the legal and ethical implications of their use and routes of administration, also concerning the adverse health consequences and deaths attributed to marijuana consumption, and these represent some of the complexities associated with the use of these compounds as therapeutic drugs. This review comprehends the main secondary metabolites of Cannabis, approaching their therapeutic potential and applications, as well as their potential risks, in order to differentiate the consumption as recreational drugs. There will be also a focus on the analytical methodologies for their analysis, in order to aid health professionals and toxicologists in cases where these compounds are present.

Current trends on microextraction by packed sorbent – fundamentals, application fields, innovative improvements and future applications

MEPS, the acronym of microextraction by packed sorbent, is a simple, fast and user- and environmentally-friendly miniaturization of the popular solid-phase extraction technique (SPE).

A rapid method to determine nine natural cannabinoids in beverages and food derived from Cannabis sativa by liquid chromatography coupled to tandem mass spectrometry on a QTRAP 4000

RATIONALE

Phytocannabinoids are natural compounds produced by Cannabis spp. Some of these compounds show psychotropic effects on humans and are therefore used as drugs of abuse. These compounds are present in food and beverages containing ingredients from hemp, and thus can reach consumers. The Italian Ministry of Health planned to evaluate the intake of cannabinoids from food containing hemp ingredients. Thus, we were asked to develop and validate a multi-residue test method to determine nine phytocannabinoids in beverages and food.

METHODS

Nine natural phytocannabinoids, hereafter called cannabinoids, were cleaned up from food by solid-liquid extraction, while beverages were simply diluted prior to analysis. The cannabinoids were separated by reversed-phase high-performance liquid chromatography, and on-line determination was carried out by tandem mass spectrometry using a 4000 QTRAP mass spectrometer with a TurboIonSpray source, in multiple-reaction monitoring mode, using both positive and negative ionization.

RESULTS

Each compound was determined down to 0.25 ng/mL in solvent. In-house validation was carried out; the mean recoveries ranged from 83.4% to 101.2% in food, and from 84.5% to 104.5% in beverages. The limits of quantification were 20 μg/kg for food and 2 μg/L for beverages.

CONCLUSIONS

A reliable and rapid method for the identification and quantification of the psychotropic Δ⁹ -tetrahydrocannabinol, its non-psychoactive precursor Δ⁹ -tetrahydrocannabinolic acid A, and seven other cannabinoids was developed and validated, to monitor the content of these substances in food and beverages produced using hemp seeds, flour and oil as ingredients.

An Atmospheric Pressure Chemical Ionization MS/MS Assay Using Online Extraction for the Analysis of 11 Cannabinoids and Metabolites in Human Plasma and Urine

BACKGROUND

Although, especially in the United States, there has been a recent surge of legalized cannabis for either recreational or medicinal purposes, surprisingly little is known about clinical dose-response relationships, pharmacodynamic and toxicodynamic effects of cannabinoids such as Δ9-tetrahydrocannabinol (THC). Even less is known about other active cannabinoids.

METHODS

To address this knowledge gap, an online extraction, high-performance liquid chromatography coupled with tandem mass spectrometry method for simultaneous quantification of 11 cannabinoids and metabolites including THC, 11-hydroxy-Δ9-tetrahydrocannabinol, 11-nor-Δ9-tetrahydrocannabinol-9-carboxylic acid, 11-nor-Δ9-tetrahydrocannabinol-9-carboxylic acid glucuronide (THC-C-gluc), cannabinol, cannabidiol, cannabigerol, cannabidivarin, Δ9-tetrahydrocannabivarin (THCV), and 11-nor-9-carboxy-Δ9-tetrahydrocannabivarin (THCV-COOH) was developed and validated in human urine and plasma.

RESULTS

In contrast to atmospheric pressure chemical ionization, electrospray ionization was associated with extensive ion suppression in plasma and urine samples. Thus, the atmospheric pressure chemical ionization assay was validated showing a lower limit of quantification ranging from 0.39 to 3.91 ng/mL depending on study compound and matrix. The upper limit of quantification was 400 ng/mL except for THC-C-gluc with an upper limit of quantification of 2000 ng/mL. The linearity was r > 0.99 for all analyzed calibration curves. Acceptance criteria for intrabatch and interbatch accuracy (85%-115%) and imprecision (<15%) were met for all compounds. In plasma, the only exceptions were THCV (75.3%-121.2% interbatch accuracy) and cannabidivarin (interbatch imprecision, 15.7%-17.2%). In urine, THCV did not meet predefined acceptance criteria for intrabatch accuracy.

CONCLUSIONS

This assay allows for monitoring not only THC and its major metabolites but also major cannabinoids that are of interest for marijuana research and clinical practice.

Development of a simple and sensitive liquid chromatography triple quadrupole mass spectrometry (LC-MS/MS) method for the determination of cannabidiol (CBD), Δ9-tetrahydrocannabinol (THC) and its metabolites in rat whole blood after oral administration of a single high dose of CBD

The investigation of the possible conversion of cannabidiol (CBD) into Δ⁹-tetrahydrocannabinol (THC) in vivo after oral administration of CBD is reported herein since recent publications suggested a rapid conversion in simulated gastric fluid. To this end, single high dose of CBD (50mg/kg) was administered orally to rats and their blood was collected after 3 and 6h. A highly sensitive and selective LC-MS/MS method was developed and fully validated in compliance with the Scientific Working Group of Forensic Toxicology (SWGTOX) standard practices for method validation in forensic toxicology. This method also involved the optimization of cannabinoids and their metabolites extraction in order to remove co-eluting phospholipids and increase the sensitivity of the MS detection. Neither THC nor its metabolites were detected in rat whole blood after 3 or 6h from CBD administration. After oral administration, the amount of CBD dissolved in olive oil was higher than that absorbed from an ethanolic solution. This could be explained by the protection of lipid excipients towards CBD from acidic gastric juice.

A column switching ultrahigh-performance liquid chromatography-tandem mass spectrometry method to determine anandamide and 2-arachidonoylglycerol in plasma samples

This study reports a fast, sensitive, and selective column switching ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method to determine the endocannabinoids (eCBs), anandamide (AEA), and 2-arachidonoylglycerol (2-AG) in plasma samples. This bidimensional system used a restricted access media column (RP-8 ADS, 25 mm × 4 mm × 25 μM) in the first dimension and a core-shell Kinetex C18 (100 mm × 2, 1.7 mm × 1 μM) column in the second dimension, followed by detection in a mass spectrometer triple quadrupole (multiple reactions monitoring mode) operating in the positive mode. RP-8 ADS was used for trace enrichment of eCBs (reverse phase partitioning) and macromolecular matrix size exclusion; the core-shell column was used for the chromatographic separation. The column switching UHPLC-MS/MS method presented a linear range spanning from 0.1 ng mL^-1 (LOQ) to 6 ng mL^-1 for AEA and from 0.04 ng mL^-1 (LOQ) to 10 ng mL^-1 for 2-AG. Excluding the LLOQ values, the precision assays provided coefficients of variation lower than 8% and accuracy with relative standard error values lower than 14%. Neither carryover nor matrix effects were detected. This high-throughput column switching method compared to conventional methods is time saving as it involves fewer steps, consumes less solvent, and presents lower LLOQ. The column switching UHPLC-MS/MS method was successfully applied to determine AEA and 2-AG in plasma samples obtained from Alzheimer's disease patients. Graphical abstract A column switching ultra high-performance liquid chromatography-tandem mass spectrometry method using RP-8 ADS column and core shell column to determine endocannabinoids in plasma samples.

Techniques and technologies for the bioanalysis of Sativex®, metabolites and related compounds

Sativex® is an oromucosal spray indicated for the treatment of moderate-to-severe spasticity in multiple sclerosis and is also an effective analgesic for advanced cancer patients. Sativex contains Δ9-tetrahydrocannabinol (THC) and cannabidiol in an approximately 1:1 ratio. The increasing prevalence of medicinal cannabis products highlights the importance of reliable bioanalysis and re-evaluation of the interpretation of positive test results for THC, as legal implications may arise in workplace, roadside and sports drug testing situations. This article summarizes published research on the bioanalysis of THC and cannabidiol, with particular focus on Sativex. Common screening and confirmatory testing of blood, urine, oral fluid and hair samples are outlined. Correlations between matrices and current analytical pitfalls are also addressed.

Water-compatible imprinted pills for sensitive determination of cannabinoids in urine and oral fluid

A novel molecularly imprinted solid phase extraction (MISPE) methodology followed by liquid chromatography tandem mass spectrometry (LC-MS/MS) has been developed using cylindrical shaped molecularly imprinted pills for detection of Δ(9)-tetrahydrocannabinol (THC), 11-nor-Δ(9)-tetrahydrocannabinol carboxylic acid (THC-COOH), cannabinol (CBN) and cannabidiol (CBD) in urine and oral fluid (OF). The composition of the molecular imprinted polymer (MIP) was optimized based on the screening results of a non-imprinted polymer library (NIP-library). Thus, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross-linker were selected for the preparation of the MIP, using catechin as a mimic template. MISPE pills were incubated with 0.5 mL urine or OF sample for adsorption of analytes. For desorption, the pills were transferred to a vial with 2 mL of methanol:acetic acid (4:1) and sonicated for 15 min. The elution solvent was evaporated and reconstituted in methanol:formic acid (0.1%) 50:50 to inject in LC-MS/MS. The developed method was linear over the range from 1 to 500 ng mL(-1) in urine and from 0.75 to 500 ng mL(-1) in OF for all four analytes. Intra- and inter-day imprecision were <15%. Extraction recovery was 50-111%, process efficiency 15.4-54.5% and matrix effect ranged from -78.0 to -6.1%. Finally, the optimized and validated method was applied to 4 urine and 5 OF specimens. This is the first method for the determination of THC, THC-COOH, CBN and CBD in urine and OF using MISPE technology.

Characterization of the designer drug bk-2C-B (2-amino-1-(bromo-dimethoxyphenyl)ethan-1-one) by gas chromatography/mass spectrometry without and with derivatization with 2,2,2-trichloroethyl chloroformate, liquid chromatography/high-resolution mass spectrometry, and nuclear magnetic resonance

RATIONALE

We describe the analytical characterization of the designer drug bk-2C-B, a cathinone derivative, contained in a seized tablet, in the absence of an analytical standard.

METHODS

The analytical techniques employed include gas chromatography/mass spectrometry (GC/MS), without and with derivatization with 2,2,2-trichloroethyl chloroformate, liquid chromatography/high-resolution-MS (LC/HRMS) with an Orbitrap® analyzer, and nuclear magnetic resonance (NMR). LC/HRMS measurements consisted of accurate mass measurements of MH(+) ionic species under full scan conditions; comparison of experimental and calculated MH(+) isotopic patterns; examination of the isotopic fine structure (IFS) of the M+1, M+2, M+3 isotopic peaks relative to the monoisotopic M+0 peak; study of MH(+) collision-induced dissociation (CID) product ions obtained in fragmentation experiments.

RESULTS

GC/MS analysis gave highly informative EI mass spectra, particularly after the derivatization of bk-2C-B with 2,2,2-trichloroethyl chloroformate. The application of LC/HRMS, allowing for accurate mass measurements at 100,000 resolving power, greatly enhanced analytical capabilities in structural characterization of this new designer drug. HRMS allowed us to obtain the accurate mass measurements of bk-2C-B MH(+) ionic species, with a mass accuracy of 2.19 ppm; fully superimposable experimental and calculated MH(+) isotopic patterns, with RIA1 and RIA2 values <4%; the IFS of the M+1, M+2, M+3 isotopic peaks relative to the monoisotopic M+0 peak completely in accordance with theoretical values. These findings enabled us to obtain the elemental composition formula of the seized drug. Furthermore, characteristic MH(+) CID product ions enabled the characterization of the bk-2C-B molecular structure. The presence of (79)Br and (81)Br isotopes in the substance molecule produced a characteristic isotopic pattern in most MS spectra. Lastly, NMR spectra allowed us to obtain useful information about the position of substituents in the designer drug.

CONCLUSIONS

The combination of all the analytical techniques employed allowed the characterization of the seized psychoactive substance, in spite of the lack of a reference standard.

Impact of oral fluid collection device on cannabinoid stability following smoked cannabis

Evaluation of cannabinoid stability in authentic oral fluid (OF) is critical, as most OF stability studies employed fortified or synthetic OF. Participants (n = 16) smoked a 6.8% delta-9-tetrahydrocannabinol (THC) cigarette, and baseline concentrations of THC, 11-nor-9-carboxy-THC (THCCOOH), cannabidiol (CBD), and cannabinol (CBN) were determined within 24 h in 16 separate pooled samples (collected 1 h before to 10.5 or 13 h after smoking). OF was collected with the StatSure Saliva Sampler™ and Oral-Eze® devices. Oral-Eze samples were re-analyzed after room temperature (RT) storage for 1 week, and for both devices after 4 °C for 1 and 4 weeks, and -20 °C for 4 and 24 weeks. Concentrations ±20% from initial concentrations were considered stable. With the StatSure device, all cannabinoids were within 80-120% median %baseline for all storage conditions. Individual THC, CBD, CBN and THCCOOH pool concentrations were stable in 100%, 100%, 80-94% and >85%, respectively, across storage conditions. With the Oral-Eze device, at RT or refrigerated storage (for 1 and 4 weeks), THC, CBD and THCCOOH were stable in 94-100%, 78-89%, and 93-100% of samples, respectively, while CBN concentrations were 53-79% stable. However, after 24 weeks at -20 °C, stability decreased, especially for CBD, with a median of 56% stability. Overall, the collection devices' elution/stabilizing buffers provided good stability for OF cannabinoids, with the exception of the more labile CBN. To ensure OF cannabinoid concentration accuracy, these data suggest analysis within 4 weeks at 4 °C storage for Oral-Eze collection and within 4 weeks at 4 °C or 24 weeks at -20 °C for StatSure collection. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.