Influence of polymer concentration on the properties of nano-emulsions and nanoparticles obtained by a low-energy method

Multifunctional Dual Enzyme-Responsive Nanostructured Lipid Carriers for Targeting and Enhancing the Treatment of Bacterial Infections

Bacterial infections pose an increasingly worrisome threat to the health of humankind, with antibiotic resistance contributing significantly to this burden. With current conventional antibiotics perpetuating the problem, and a paucity in developing antibiotics, drug delivery systems incorporating nanotechnology appear promising. As such, a dual enzyme-responsive multifunctional nanostructured lipid carrier (NLC) incorporating farnesol (FAN) and triglycerol monostearate (TGMS), was conceptualized for the codelivery of vancomycin (VCM) and antimicrobial peptide (AMP) to enhance the antibacterial activity of VCM. In silico studies and Microscale Thermophoresis demonstrated the strong binding relationships between the NLC constituents and two enzymes that exist in higher concentrations during host infection, namely lipase and a matrix metalloproteinase (MMP). The formulated nanosystem, VCM-AMP-TF-NLCs, had a particle size, polydispersity index, zeta potential, and entrapment efficiency of 149.00 ± 2.97 nm, 0.07 ± 0.01, -5.51 ± 1.21 mV, and 86.20% ± 1.47%, respectively. The NLCs, which showed stability, and biocompatibility, also demonstrated lipase- and MMP-responsiveness. The in vitro antibacterial studies revealed 2-fold and 8-fold reductions in the minimum inhibitory concentration for the NLCs compared to bare VCM, against methicillin-resistant Staphylococcal aureus (MRSA) and Escherichia coli, respectively. Furthermore, in vivo studies revealed that tissues treated with the VCM-AMP-TF-NLCs displayed significantly reduced bacterial burdens (up to 8.73-fold) and less histopathological cellular injury, edema, and necrosis compared to the tissues treated with bare VCM alone. The results support the superiority of the VCM-AMP-TF-NLCs as a multifunctional dual enzyme-responsive NLC compared to bare VCM.

Fine-Tuning the Physicochemical Properties of Poly(lactic Acid) Nanoparticles for the Controlled Release of the BET Inhibitor JQ1: Influence of PVA Concentration

The compounds targeting the bromo and extra terminal domain proteins (BET), such as the JQ1, present potent anti-cancer activity in preclinical models, however, the application of JQ1 at the clinical level is limited by its short half-life, rapid clearance, and non-selective inhibition of BET family proteins, leading to off-target effects and resistance. To address these challenges, the optimization of JQ1 delivery has been accomplished through polylactide (PLA) nanoparticles. PLA derivatives with varying molecular weights were synthesized via ring-opening polymerization using a zinc-based initiator and characterized using thermogravimetric analysis, differential scanning calorimetry, and infrared spectroscopy. PLA nanoparticles (NPs) were subsequently formulated, and the effects of key parameters-including PLA molecular weight, organic phase concentration, and surfactant concentration-on particle size, polydispersity index (PDI), and encapsulation efficiency were systematically investigated. PLA molecular weight and organic phase concentration mainly influenced the NPs size whilst the thermodynamic state of the NPs was unaffected by these two parameters. The surfactant concentration is correlated to the encapsulation efficacy of JQ1 as well as the release profile, suggesting the potential tool that the variation of these parameters represent for customizing the release of JQ1 according to specific needs.

Unveiling the power of liquid chromatography in examining a library of degradable poly(2-oxazoline)s in nanomedicine applications

A library of degradable poly(2-alkyl-2-oxazoline) analogues (dPOx) with different length of the alkyl substituents was characterized in detail by gradient elution liquid chromatography. The hydrophobicity increased with increased side chain length as confirmed by a hydrophobicity row, established by reversed-phase liquid chromatography. Those dPOx were cytocompatible and formed colloidally stable nanoparticle (NP) formulations with positive zeta potential. Dynamic light scattering (DLS) revealed that dPOx with increased hydrophobicity tended to form NPs with increased sizes. NPs created from the most hydrophobic polymer, degradable poly(2-nonyl-2-oxazoline) (dPNonOx), showed tendency for aggregation at pH 5.0, and in the presence of protease in solution, in particular for NPs formulated without surfactant. Liquid chromatography revealed enzymatic degradation of dPNonOx NPs, clearly demonstrating the disappearance of polymer signals and the appearance of hydrophilic degradation products eluting close to the chromatographic void time. The degradation process was confirmed by 1H NMR spectroscopy. dPNonOx NPs containing the anti-inflammatory drug BRP-201 as payload reduced 5-lipoxygenase activity in human neutrophils. Thereby, composition analysis of the resultant NPs, including drug quantification, was also enabled by liquid chromatography. The results indicate the importance of a detailed analysis of the final polymer-based NP formulations by a multimethod approach, including, next to standard applied techniques such as DLS/ELS, the underexplored potential of liquid chromatography. The latter is demonstrated to resolve a fine structure of solution composition, together with an assessment of possible degradation pathways and is versatile in determining hydrophobicity/hydrophilicity of polymer materials. Our study underscores the power of liquid chromatography for characterization of soft matter drug carriers.

Polymer nanoparticles from low-energy nanoemulsions for biomedical applications

The formulation of nanoemulsions by low-energy strategies, particularly by the phase inversion composition method, and the use of these nanoemulsions as templates for the preparation of polymer nanoparticles for biomedical applications are reviewed. The methods of preparation, nature of the components in the formulation, and their impact on the physicochemical properties, drug loading, and drug release are discussed. We highlight the utilization of ethyl cellulose, poly(lactic-co-glycolic acid), and polyurethane/polyurea in the field of nanomedicine as potential drug delivery systems. Advances are still needed to achieve better control over size distribution, nanoparticle concentration, surface functionalization, and the type of polymers that can be processed.

Ultrasound-assisted nanoemulsion of Trachyspermum ammi essential oil and its constituent thymol on toxicity and biochemical aspect of Aedes aegypti

Aedes aegypti is the main vector of yellow fever, chikungunya, Zika, and dengue worldwide and is managed by using chemical insecticides. Though effective, their indiscriminate use brings in associated problems on safety to non-target and the environment. This supports the use of plant-based essential oil (EO) formulations as they are safe to use with limited effect on non-target organisms. Quick volatility and degradation of EO are a hurdle in its use; the present study attempts to develop nanoemulsions (NE) of Trachyspermum ammi EO and its constituent thymol using Tween 80 as surfactant by ultrasonication method. The NE of EO had droplet size ranging from 65 ± 0.7 to 83 ± 0.09 nm and a poly dispersity index (PDI) value of 0.18 ± 0.003 to 0.20 ± 0.07 from 1 to 60 days of storage. The NE of thymol showed a droplet size ranging from 167 ± 1 to 230 ± 1 nm and PDI value of 0.30 ± 0.03 to 0.40 ± 0.008 from 1 to 60 days of storage. The droplet shape of both NEs appeared spherical under a transmission electron microscope (TEM). The larvicidal effect of NEs of EO and thymol was better than BEs (Bulk emulsion) of EO and thymol against Ae. aegypti. Among the NEs, thymol (LC₅₀ 34.89 ppm) had better larvicidal action than EO (LC₅₀ 46.73 ppm). Exposure to NEs of EO and thymol causes the shrinkage of the larval cuticle and inhibited the acetylcholinesterase (AChE) activity in Ae. aegypti. Our findings show the enhanced effect of NEs over BEs which facilitate its use as an alternative control measure for Ae. aegypti.

Pulsatile Controlled Release and Stability Evaluation of Polymeric Particles Containing Piper nigrum Essential Oil and Preservatives

Considerable efforts have been spent on environmentally friendly particles for the encapsulation of essential oils. Polymeric particles were developed to encapsulate the essential oil from Piper nigrum based on gelatin and poly-ε-caprolactone (PCL) carriers. Gas Chromatography ((Flame Ionization Detection (GC/FID) and Mass Spectrometry (GC/MS)), Atomic Force Microscopy (AFM), Nanoparticle Tracking Analysis (NTA), Confocal Laser Scanning Microscopy (CLSM), Attenuated Total Reflectance-Fourier-transform Infrared Spectroscopy (ATR-FTIR), and Ultraviolet-Visible (UV-VIS) spectroscopy were used for the full colloidal system characterization. The essential oil was mainly composed of β-caryophyllene (~35%). The stability of the encapsulated systems was evaluated by Encapsulation Efficiency (EE%), electrical conductivity, turbidity, pH, and organoleptic properties (color and odor) after adding different preservatives. The mixture of phenoxyethanol/isotialzoni-3-one (PNE system) resulted in enhanced stability of approximately 120 and 210 days under constant handling and shelf-life tests, respectively. The developed polymeric system presented a similar controlled release in acidic, neutral, or basic pH, and the release curves suggested a pulsatile release mechanism due to a complexation of essential oil in the PCL matrix. Our results showed that the developed system has potential as an alternative stable product and as a controlling agent, due to the pronounced bioactivity of the encapsulated essential oil.

Microfluidicmixing system for precise PLGA-PEG nanoparticles size control

In this study, a microfluidic device was employed to produce polymeric nanoparticles (NPs) with well-controlled sizes. The influence of several parameters in the synthesis process, namely, polymer concentration, flow rate and flow rate ratio between the aqueous and organic solutions was investigated. To evaluate the NPs size effect, three diameters were selected (30, 50 and 70nm). Their cytocompatibility was demonstrated on endothelial cells and macrophages. Additionally, their efficacy to act as drug carriers was assessed in an in vitro inflammatory scenario. NPs loaded and released diclofenac (DCF) in a size-dependent profile (smaller sizes presented lower DCF content and higher release rate). Moreover, 30nm NPs were the most effective in reducing prostaglandin E₂ concentration. Therefore, this study demonstrates that microfluidics can generate stable NPs with controlled sizes, high monodispersity and enhanced batch-to-batch reproducibility. Indeed, NPs size is a crucial parameter for drug encapsulation, release and overall biological efficacy.

Preparation and characterization of a novel green tea essential oil nanoemulsion and its antifungal mechanism of action against Magnaporthae oryzae

Blast is one of the most devastating fungal diseases of rice caused by Magnaporthe oryzae. Plant essential oil (EO) can function as antifungal agents and are regarded as a safe and acceptable method for plant disease control. However, EOs are unstable and hydrophobic, which limits its use. In the present study, we aimed for the preparation and characterization of a nanoemulsion (NE) from green tea essential oil (GTO) by ultrasonication method and determined the antifungal activity of NE onM. oryzae. The particle size and zeta potential of the NE were 86.98 nm and -15.1 mV, respectively. The chemical composition and functional groups of GTO and NE were studied by using GC-MS analysis, portable Raman spectroscopy, and FTIR coupled with chemometric analysis. GC-MS analysis showed the major components in GTO and NE were n-Hexyl cinnamaldehyde and L-α-Terpineol. Both GTO and NE showed good antioxidant activity and total phenol content. Moreover, the NE showed good antifungal activity againstM. oryzae which was further confirmed by scanning electron microscopy (SEM) examination. Also, confocal Raman micro-spectroscopy (CRM) revealed the antifungal mechanism of GTO and NE on M. oryzae which proves the cell damage. To the best of our knowledge, this is the first study on the antifungal activity of GTO and NE against M. oryzae and also the use of CRM for the evaluation of the chemical changes in single fungal hyphae in a holistic approach. This study suggests that the prepared NE could be a potential candidate for use as a substitute for synthetic fungicides.

Effect of Crystallinity on the Properties of Polycaprolactone Nanoparticles Containing the Dual FLAP/mPEGS-1 Inhibitor BRP-187

Seven polycaprolactones (PCL) with constant hydrophobicity but a varying degree of crystallinity prepared from the constitutional isomers ε-caprolactone (εCL) and δ-caprolactone (δCL) were utilized to formulate nanoparticles (NPs). The aim was to investigate the effect of the crystallinity of the bulk polymers on the enzymatic degradation of the particles. Furthermore, their efficiency to encapsulate the hydrophobic anti-inflammatory drug BRP-187 and the final in vitro performance of the resulting NPs were evaluated. Initially, high-throughput nanoprecipitation was employed for the εCL and δCL homopolymers to screen and establish important formulation parameters (organic solvent, polymer and surfactant concentration). Next, BRP-187-loaded PCL nanoparticles were prepared by batch nanoprecipitation and characterized using dynamic light scattering, scanning electron microscopy and UV-Vis spectroscopy to determine and to compare particle size, polydispersity, zeta potential, drug loading as well as the apparent enzymatic degradation as a function of the copolymer composition. Ultimately, NPs were examined for their potency in vitro in human polymorphonuclear leukocytes to inhibit the BRP-187 target 5-lipoxygenase-activating protein (FLAP). It was evident by Tukey's multi-comparison test that the degree of crystallinity of copolymers directly influenced their apparent enzymatic degradation and consequently their efficiency to inhibit the drug target.

Statistically optimized pentazocine loaded microsphere for the sustained delivery application: Formulation and characterization

Pentazocine (PTZ) is a narcotic analgesic used to manage moderate to severe, acute and chronic pains. In this study, PTZ loaded Ethyl cellulose microsphere has been formulated for sustained release and improved bioavailability of PTZ. These microspheres were fabricated by oil in water emulsion solvent evaporation technique. A three factorial, three levels Box-Behnken design was applied to investigate the influence of different formulation components and process variables on the formulation response using the numeric approach through the design expert^® software. All the formulations were characterized for the morphology, different physicochemical properties and the results were supported with the ANOVA analysis, three dimensional contour graphs and regression equations. The maximum percentage yield was 98.67% with 98% entrapment of PTZ. The mean particle size of the formulations ranges from 50–148μm, which directly relates to the concentration of polymer and inversely proportional to the stirring speed. SEM revealed the spherical shape of PTZ microspheres with porous structures. These are physically, chemically and thermally stable as confirmed through Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD) and thermal gravimetric (TG) analysis respectively. The microspheres provided a sustained release of the PTZ for more than 12 hours, following zero order with fickian and non fickian diffusion. The results indicate that prepared microspheres can be a potential drug delivery system (DDS) for the delivery of PTZ in the management of pains.

Ultrasound assisted formation of essential oil nanoemulsions: Emerging alternative for Culex pipiens pipiens Say (Diptera: Culicidae) and Plodia interpunctella Hübner (Lepidoptera: Pyralidae) management

Over the last years, nanotechnology has contributed to the development of new botanical insecticides formulations based on essential oils (EO), which are safe for the human health and the environment. Nanoemulsions (NEs) can enhance the bioactivity of the EO to prevent the premature volatility and degradation of the active ingredients. In our work, geranium EO (Geranium maculatum L.) was used to develop micro and nanoemulsions adding Tween 80 as surfactant. For NEs formulation, ultrasound was applied and the physicochemical and ultrasound parameters were optimized: oil: surfactant ratio = 1:2, ultrasound power = 65 W, sonication time = 2 min, cycles = 30 on/20 off and ultrasonic probe distance = 3.7 cm. The NEs obtained had 13.58 nm and polydisperse index (PDI) values of 0.069. They were stored at 25 °C and were stable for 60 days. The present study also demonstrated the potential of NEs to enhance the toxicity of geranium EO against larvae of Culex pipiens pipiens (EO LC₅₀ = 80.97 ppm, NEs LC₅₀ = 48.27 ppm) and Plodia interpunctella (EO + β-cypermethrin LD₅₀ = 0.16 μg larvae^-1, NEs + β-cypermethrin LD₅₀ = 0.07 μg larvae^-1). Overall, our findings pointed out that NEs can increase twofold the insecticidal efficacy of EO, and thus, they can be considered further for the development of botanical insecticides.