Xanthate modified magnetic activated carbon for efficient removal of cationic dyes and tetracycline hydrochloride from aqueous solutions

Abatement of microbes and organic pollutants using heterostructural nanocomposites of rice straw CQDs with substituted strontium ferrite

Sustainable use of agricultural waste still remains a challenging task. Herein, we used rice straw as a carbon precursor to prepare carbon quantum dots (CQDs) for photocatalytic applications. Nanocomposites of CQDs with Ti4+ and Mg2+ substituted strontium ferrite (Sr0·4Ti0·4Mg0·2Fe2O4.4) nanoparticles (NPs) in varying w:w ratio was synthesized by ultrasonication method. The successful formation of nanocomposites was confirmed by various microscopic and spectroscopic techniques. The photocatalytic and antibacterial activity of NPs, CQDs and nanocomposites was comparatively evaluated using tetracycline hydrochloride, azure B, Staphylococcus aureus and Escherichia coli as model pollutants. The CQDs-Sr0.4Ti0·4Mg0·2Fe2O4.4 nanocomposite with a w:w ratio of 2:1 showed excellent photocatalytic and antibacterial activity, with the degradation and inactivation efficiency ranging from 97.1% to 99.0% in presence of visible light. The increased specific surface area (117.2 m2/g), and reduction in band gap (2.48 eV-2.09 eV) and decreased photoluminescence intensity of nanocomposites all corroborated these results. The impacting experimental parameters such as catalyst dose, pH and contact time were also examined. Quenching experiments confirmed that hydroxyl radicals (HO∙) radicals and holes (h+) played a vital role in the degradation of pollutants. The kinetics of photodegradation was explained by using the Langmuir-Hinshelwood model. Box-Behnken statistical modelling was used to optimize photocatalytic parameters. Results indicated that the nanocomposite of CQDs with Sr0·4Ti0·4Mg0·2Fe2O4.4 can serve as a promising photocatalyst for the removal of pollutants and microbes.

Competitive adsorption of heavy metals onto xanthate-modified sludge hydrochar and its solidification as secondary minerals

In this study, a sulfur-modified magnetic hydrochar was synthesized by grafting thiol-containing groups onto the sludge-derived hydrochar. The modified hydrochar exhibited effective adsorption of Cu2+, Pb2+, Zn2+, and Cd2+ over a wide pH range and in the presence of coexisting ions, and showed almost no secondary leaching in three acidic solutions. In the mult-metal ion system, the modified hydrochar exhibited maximum adsorption capacities were 39.38, 105.74, 26.53, and 38.11 mg g-1 for Cu2+, Pb2+, Zn2+, and Cd2+, respectively. However, the binding capacity and adsorption amount of modified hydrochar for metal ions were lower in the mult-metal ion system compared to the unit-metal ion system. Notably, Pb2+ showed a strong inhibitory effect on the adsorption of other heavy metal ions by modified hydrochar due to strong competition for xanthate functional groups. The Pb2+ occupied the xanthate and native functional groups (-OH, -NH2, and Fe-O etc.), leaving only a small amount of adsorption sites for Cu2+, Zn2+ and Cd2+. Simulation results further supported these findings, indicating that Pb2+ had the highest density profiles near the four functional groups, and the density profiles of the four heavy metals near the xanthate functional groups were greater compared to the other three functional groups. Furthermore, the SEM-EDS, TOF-SIMI, and XPS results indicated that modified hydrochar achieved excellent mineral binding mainly through electrostatic interaction, ion exchange, and chelation. Overall, these results highlight the sulfur-modified magnetic hydrochar as a highly efficient adsorbent for heavy metals in environmental applications.

Optimization of hydrothermal synthesis conditions of Bidens pilosa-derived NiFe2O4@AC for dye adsorption using response surface methodology and Box-Behnken design

The presence of stable and hazardous organic dyes in industrial effluents poses significant risks to both public health and the environment. Activated carbons and biochars are widely used adsorbents for removal of these pollutants, but they often have several disadvantages such as poor recoverability and inseparability from water in the post-adsorption process. Incorporating a magnetic component into activated carbons can address these drawbacks. This study aims to optimizing the production of NiFe2O4-loaded activated carbon (NiFe2O4@AC) derived from a Bidens pilosa biomass source through a hydrothermal method for the adsorption of Rhodamine B (RhB), methyl orange (MO), and methyl red (MR) dyes. Response surface methodology (RSM) and Box-Behnken design (BBD) were applied to analyze the key synthesis factors such as NiFe2O4 loading percentage (10-50%), hydrothermal temperature (120-180 °C), and reaction time (6-18 h). The optimized condition was found at a NiFe2O4 loading of 19.93%, a temperature of 135.55 °C, and a reaction time of 16.54 h. The optimum NiFe2O4@AC demonstrated excellent sorption efficiencies of higher than 92.98-97.10% against all three dyes. This adsorbent was characterized, exhibiting a well-developed porous structure with a high surface area of 973.5 m2 g-1. Kinetic and isotherm were studied with the best fit of pseudo-second-order, and Freundlich or Temkin. Qmax values were determined to be 204.07, 266.16, and 177.70 mg g-1 for RhB, MO, and MR, respectively. By selecting HCl as an elution, NiFe2O4@AC could be efficiently reused for at least 4 cycles. Thus, the Bidens pilosa-derived NiFe2O4@AC can be a promising material for effective and recyclable removal of dye pollutants from wastewater.

Hydrophobic-action-driven removal of six organophosphorus pesticides from tea infusion by modified carbonized bacterial cellulose

The abuse of organophosphorus pesticides (OPPs) in tea planting makes it easy to transfer from tea into its infusion, bringing potential health risks to consumers. Thus, it is essential to adopt reliable techniques to remove OPPs from tea infusion. In this study, three treatment methods were used to modify carbonized bacterial cellulose (CBC) to improve its adsorption performance. Among them, CBC treated by hydrazine hydrate (N-CBC) had the best adsorption effect, whose removal rate for dicrotophos is 13 times that of CBC. The in-depth study of adsorption mechanism proved that hydrophobic interaction dominated the adsorption of OPPs onto N-CBC. The pseudo-second-order kinetic model and Langmuir isotherm model were more suitable to describe the process. Additionally, there were no significant changes in tea infusion quality after N-CBC treatment. This work clarifies that N-CBC benefitted from simple preparation method, excellent adsorption performance and unique adsorption mechanism has potential applications in tea infusion.

Removal of low-concentration tetracycline from water by a two-step process of adsorption enrichment and photocatalytic regeneration

Developing a high-performance method that can effectively control pollution caused by low concentrations of antibiotics is urgently needed. Herein, a novel three-dimensional PPy/Zn₃In₂S₆ nanoflower composites were prepared for the comprehensive treatment of low-concentration tetracycline (Tc) hydrochloride in wastewater based on the adsorption/photocatalysis of Zn₃In₂S₆ and the conductivity of PPy. In this preparation method, adsorption enrichment and photocatalytic regeneration were conducted in two steps, eliminating the dilution and dispersion effects of aqueous solvents on photocatalytic species and antibiotics. Results showed that Zn₃In₂S₆ could effectively adsorb 87.85% of Tc at pH of 4.5 and photocatalytically degrade Tc at pH of 10.5. Although the adsorption capacity of Zn₃In₂S₆ was slightly reduced after being combined with PPy, its photocatalytic efficiency was substantially enhanced. Specifically, 0.5%PPy/Zn₃In₂S₆ could degrade 99.92% of the surface-enriched Tc in 1 h and induce the regeneration of the adsorption sites. Furthermore, the adsorption capacity remained above 85% even after recycling PPy/Zn₃In₂S₆ ten times. The photocatalytic degradation mechanism analysis revealed that the enrichment of Tc on 0.5%PPy/Zn₃In₂S₆ negatively impacts the photocatalytic efficiency, while •O₂^- and •OH radicals were the main oxidative species that played an important role in the photoregeneration process.

Adsorption and Desorption Study of Reusable Magnetic Iron Oxide Nanoparticles Modified with Justicia adhatoda Leaf Extract for the Removal of Textile Dye and Antibiotic

The release of tetracycline hydrochloride (TCH) and methylene blue (MB) dye into the aquatic system uncontrollably caused major environmental and health problems; hence, their prevention required serious attention. Adsorption process is now being researched in order to increase adsorption efficiency and reprocess to alleviate environmental issues. The use of magnetic nanoparticle as an adsorbent for wastewater treatment has a lot of prospective. A magnetic iron oxide nanoparticle surface modified by Vasaka (Justicia adhatoda) leaf extract (JA-MIONs) is used to give a fast removal approach for MB dye and TCH antibiotics. Dynamic light scattering, UV-Vis and band gap measurement, powder X-ray diffraction, Fourier-transform infrared spectroscopy, and transmission electron microscopy were operated to analyse the formation and size of these magnetic nanoparticles. The impacts of different factors such as contact time (30-150 min), adsorbate concentration (10-50 mg/L), pH (4-10), and adsorbent dose (2-10 mg) were explored. Adsorption kinetics and isotherms show that it follows the pseudo-first-order kinetic and the Freundlich isotherm, with maximum adsorption capacities of 76.92 mg/g for MB and 200 mg/g for TCH at 298 K. The reusability of the JA-MIONs eventually exhibited a decline in the adsorption percentage of MB and TCH after five and four times respectively. After the desorption-adsorption cycles, this adsorbent continued to exhibit significant adsorption capacity. This investigation furnished the significant reference data for the synthesis of JA-MIONs as a novel and auspicious adsorbent for the industrial clean-up of toxic dyes and heavily used antibiotics from water.

Photocatalytic degradation of tetracycline hydrochloride by a Fe3O4/g-C3N4/rGO magnetic nanocomposite mechanism: modeling and optimization

The photocatalytic degradation of antibiotics requires a good separation efficiency of photogenerated electron-hole pairs and a wide visible light absorption range. Current studies have discussed the successful preparation of ferroferric oxide/graphite carbon nitride/reduced graphene oxide (Fe₃O₄/g-C₃N₄/rGO). The phase structure and morphology of the Fe₃O₄/g-C₃N₄/rGO composites were characterized by XRD, HR-TEM, SEM, and EDS. The obtained composites were used to degrade tetracycline hydrochloride (TCH) to evaluate its photocatalytic activity. The effects of four variables on the degradation of TCH were analyzed by the response surface method and artificial intelligence (gradient regression tree, random forest, artificial neural network, etc.). The results showed that the graphite carbon nitride in the catalyst maintained its original structure and that the photocatalytic activity was significantly improved. The degradation rate of TCH was 86.7% under the optimal conditions (the Fe₃O₄/g-C₃N₄/rGO dosage was 0.1 g, pH = 7.0, the initial concentration of TCH was 20 mg/L, and the visible light irradiation time was 60 min). At the same time, the degradation rate of TCH changed little after the material was used five times, which indicates that the stability and recyclability of the Fe₃O₄/g-C₃N₄/rGO photocatalyst were excellent. Finally, a possible photocatalytic mechanism of the Fe₃O₄/g-C₃N₄/rGO photocatalyst is proposed in this paper.

Magnetic Luffa-Leaf-Derived Hierarchical Porous Biochar for Efficient Removal of Rhodamine B and Tetracycline Hydrochloride

Luffa leaf (LL) is an agricultural waste produced by loofah. In this work, LL was used as biomass carbon source for biochars for the first time. After carbonization, activation, and chemical co-precipitation treatments, a magnetic lignocellulose-derived hierarchical porous biochar was obtained. The specific surface area and total pore volume were 2565.4 m²/g and 1.4643 cm³/g, and the surface was rich in carbon and oxygen functional groups. The synthetic dye rhodamine B (RhB) and the antibiotic tetracycline hydrochloride (TH) were selected as organic pollutant models to explore the ability to remove organic pollutants, and the results showed good adsorption performances. The maximum adsorption capacities were 1701.7 mg/g for RhB and 1755.9 mg/g for TH, which were higher than most carbon-based adsorbents. After 10 cycles of use, the removal efficiencies were still maintained at more than 70%, showing good stability. This work not only verified the feasibility of lignocellulose LL as a carbon source to prepare biochar but also prepared a magnetic hierarchical porous adsorbent with good performances that can better treat RhB and TH, which provided a new idea and direction for the efficient removal of organic pollutants in water.

The potential of a natural iron ore residue application in the efficient removal of tetracycline hydrochloride from an aqueous solution: insight into the degradation mechanism

In the existing research, most of the heterogeneous catalysts applied in the activation of persulfate to degrade organic pollutants were synthesized from chemical reagents in the laboratory. In this paper, we have obtained a spent iron ore (IO) residue directly collecting from the iron ore plants, and efficiently activating peroxydisulfate (PS) to produce reactive free radicals. The experimental results demonstrated that the IO could effectively activate PS to degrade tetracycline hydrochloride (TCH), with TCH removal rate reaching up to 85.6% within 2 h at room temperature. The TCH removal rate was increased with increasing iron ore dosage, while the more acidic pH condition would be favorable to TCH removal process. The material characterization results demonstrated that the dominant components of IO were Fe₃O₄ and FeOOH. The transformation from Fe(II) to Fe(III) at the surface IO was observed after TCH degradation. What's more, the quenching experiment and EPR detection results confirmed that the sulfate radical (SO₄^•-) and hydroxyl radicals (•OH) would be acting as the main free radicals for TCH degradation. This study could not only explore a novel way to recycle the discarded iron ore, but also further expand its application in an effective activation of PS in an aqueous solution.

Cow Dung-Based Biochar Materials Prepared via Mixed Base and Its Application in the Removal of Organic Pollutants

Cow dung (CD) is a waste product of livestock production. Improper disposal of a large amount of CD will cause environmental pollution. In this work, three biochar materials based on CD (BMCD) were prepared by using three types of base, including KOH, NaOH, and mixed base (MB, a mixture of equal mass NaOH and KOH) as activators to investigate the different physicochemical properties of BMCDs (BMCD-K, BMCD-Na, and BMCD-MB). The objective was to verify the effectiveness of MB activation in the preparation of biochar materials. The results show that MB has an effect on the structural characteristics of BMCDs. In particular, the surface area and total pore volume, the specific surface area, and the total pore volume of BMCD-MB (4081.1 m² g⁻¹ and 3.0118 cm³ g⁻¹) are significantly larger than those of BMCD-K (1784.6 m² g⁻¹ and 1.1142 cm³ g⁻¹) and BMCD-Na (1446.1 m² g⁻¹ and 1.0788 cm³ g⁻¹). While synthetic dye rhodamine B (RhB) and antibiotic tetracycline hydrochloride (TH) were selected as organic pollutant models to explore the adsorption performances, the maximum adsorption capacities of BMCD-K, BMCD-NA and BMCD-MB were 951, 770, and 1241 mg g⁻¹ for RhB, 975, 1051, and 1105 mg g⁻¹ for TH, respectively, which were higher than those of most adsorbents. This study demonstrated that MB can be used as an effective activator for the preparation of biochar materials with enhanced performance.

Efficient Adsorption-Photocatalytic Removal of Tetracycline Hydrochloride over Octahedral MnS

To disclose the effect of crystal plane on the adsorption-photocatalytic activity of MnS, octahedral MnS was prepared via the hydrothermal route to enhance the adsorption and photocatalytic efficiencies of tetracycline hydrochloride (TCH) in visible light region. The optimal MnS treated at 433 K for 16 h could remove 94.83% TCH solution of 260 mg L⁻¹ within 180 min, and its adsorption-photocatalytic efficiency declined to 89.68% after five cycles. Its excellent adsorption-photocatalytic activity and durability were ascribed to the sufficient vacant sites of octahedral structure for TCH adsorption and the feasible band-gap structure for visible-light response. In addition, the band gap structure (1.37 eV) of MnS with a conduction band value of −0.58 eV and a valence band value of 0.79 eV was favorable for the generation of O²⁻, while unsuitable for the formation of OH. Hence, octahedral MnS was a potential material for the removal of antibiotics from wastewater.

Porous activated carbons derived from bamboo pulp black liquor for effective adsorption removal of tetracycline hydrochloride and malachite green from water

As a kind of wastewater produced by papermaking industry, bamboo pulp black liquor (BPBL) discharged into water causes serious environmental problems. In this work, BPBL was successfully converted into porous carbon after activation with potassium hydroxide (KOH) through one-step carbonization, and adsorption properties of porous carbon derived from bamboo pulp black liquor (BLPC) for tetracycline hydrochloride (TCH) and malachite green (MG) were studied. The adsorption capacities of BLPC for TCH and MG are 1047 and 1277 mg/g, respectively, due to its large specific surface area of 1859.08 m²/g. Kinetics and isotherm data are well fitted to the pseudo-second-order rate model and Langmuir model, respectively. Adsorption experiments and characterizations reveal that the adsorption mechanism involved in TCH and MG adsorption on BLPC mainly depends on the synergistic effect of pore filling, H-bonding, π-π interactions and weak electrostatic interactions. In addition, BLPC shows excellent photothermal properties, and the adsorption capacity of TCH and MG on BLPC can reach 584 and 847 mg/g under the irradiation of near infrared lamp for 50 min, respectively. The synthesized BLPC with high adsorption efficiency, good recovery ability, improved adsorption under near-infrared irradiation can be a promising and effective adsorbent for TCH or MG or other pollutes.

Xanthate-Modified Magnetic Fe3O4@SiO2-Based Polyvinyl Alcohol/Chitosan Composite Material for Efficient Removal of Heavy Metal Ions from Water

Chitosan has several shortcomings that limit its practical application for the adsorption of heavy metals: mechanical instability, a challenging separation and recovery process, and low equilibrium capacity. This study describes the synthesis of a magnetic xanthate-modified polyvinyl alcohol and chitosan composite (XMPC) for the efficient removal and recovery of heavy metal ions from aqueous solutions. The XMPC was synthesized from polyvinyl alcohol, chitosan, and magnetic Fe₃O₄@SiO₂ nanoparticles. The XMPC was characterized, and its adsorption performance in removing heavy metal ions was studied under different experimental conditions. The adsorption kinetics fit a pseudo-second-order kinetic model well. This showed that the adsorption of heavy metal ions by the XMPC is a chemical adsorption and is affected by intra-particle diffusion. The equilibrium adsorption isotherm was well described by the Langmuir and Freundlich equations. The XMPC reached adsorption equilibrium at 303 K after approximately 120 min, and the removal rate of Cd(II) ions was 307 mg/g. The composite material can be reused many times and is easily magnetically separated from the solution. This makes the XMPC a promising candidate for widespread application in sewage treatment systems for the removal of heavy metals.

A mild and one-pot method to activate lignin-derived biomass by using boric acid for aqueous tetracycline antibiotics removal in water

A mild and one-pot activation approach of activated carbon was found. The feasibility of boric acid as the activated reagent which was used for the adsorption of four tetracyclines antibiotics (TCs) in water. Boric acid activated carbon (BAC) from bioresource has a much higher removal efficiency than currently reported biochar. The maximum adsorption capacity of BAC is 173.9 mg/g for TCs. BAC is an ecofriendly, nontoxic, and low-cost absorbent from sawdust waste. BAC and TCs could keep coalescing at least 55 days on the surface without stable release. BAC was fully characterized by using scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Raman, zeta potential, and Brunauer-Emmett-Teller analysis; the large surface area and rich pore structure were proved. The interaction between BAC and TCs are hydrogen bond interaction, π-π interaction, and electrostatic interaction. These interactions are also related to the surface charge of BAC and the TCs' species of ions in different pH. Furthermore, the adsorption kinetics and adsorption isotherm of BAC were studied thoroughly. The pseudo-first-order, pseudo-second-order, intra-particle diffusion, Elovich Langmuir, Freundlich, and Dubinin-Radushkevich models were fitted and the physical adsorption process was proved. After the study on adsorption thermodynamics, adsorption exhibits a spontaneous and favorable process.

Oxytetracycline Adsorption from Aqueous Solutions on Commercial and High-Temperature Modified Activated Carbons

The aim of the work was to evaluate the possibility of using commercial and modified activated carbons for the removal of oxytetracycline from aqueous solutions. The kinetics and statics of adsorption as well as the effect of the activated carbon dose and solution pH on the efficiency of the oxytetracycline adsorption were analyzed. Based on the study of oxytetracycline adsorption isotherms, the activated carbons were ranked in the following order: F-300 > WG-12 > Picabiol > ROW08 > WACC 8 × 30 > F-100 > WAZ 0.6–2.4. The most effective activated carbons were characterized by large specific surfaces. The best matching results were obtained for: Redlich–Peterson, Thot and Jovanovic models, and lower for the most frequently used Freundlich and Langmuir models. The adsorption proceeded better from solutions with pH = 6 than with pH = 3 and 10. Two ways of modifying activated carbon were also assessed. A proprietary method of activated carbon modification was proposed. It uses the heating of activated carbon as a result of current flow through its bed. Both carbons modified at 400 °C in the rotary kiln and on the proprietary SEOW (Joule-heat) modification stand enabled to obtain adsorbents with higher and comparable monolayer capacities. The advantage of the proposed modification method is low electricity consumption.