Adsorption kinetics and thermodynamics of rare earth on Montmorillonite modified by sulfuric acid

Bioengineered FeZn/GA@Cu nanocomposite utilizing spent coffee ground extract and gum arabic: Enhanced nitrate removal via (RSM) and machine learning optimization

This research focused on synthesizing an eco-friendly FeZn/GA@Cu nanocomposite using spent coffee grounds and Gum Arabic (GA). The study aimed to investigate its effectiveness as both a photocatalyst and an adsorbent, specifically for removing nitrates from aqueous solutions. The prepared nanocomposite was characterized using various analytical techniques, including XRD, TGA, FESEM with EDS, TEM, BET, FTIR, zeta potential, UV-DRS, and VSM. The RSM method, an impressive removal efficiency of 95.28 % for nitrate was projected under the specific conditions of an optimal dose of 1.82 g/L, an initial concentration of 60.00 mg/L, a pH level of 5.85, and a reaction duration of 48.90 min. It was ascertained that the peak efficiency of 98.25 % could be achieved with a carefully calibrated dose of 1.94 g/L, an initial concentration of 62.69 mg/L, a pH of 5.16, and a reaction time contained within 45.75 min. The synthesized nanocomposites have shown potential antibacterial activity against gram+ve (Staphylococcus aureus) and gram-ve (Escherichia coli) pathogens. This study suggests that the FeZn/GA@Cu nanocomposite synthesized using spent coffee grounds has potential as a photocatalyst for removing nitrate from aqueous solutions.

Clay-reinforced PVC composites and nanocomposites

Clay-reinforced polyvinyl chloride (PVC) composites and nanocomposites are one of the newest and most important compounds studied and used in various applications, including the biomedical, automotive industry, water treatment, packaging, fire retarding, and construction. The most important clays used in the synthesis of these composites are Bentonite, Montmorillonite, Kaolinite, and Illite. The addition of these nanoclays to the PVC matrix improves mechanical properties, thermal stability, and yellowness index properties. In this chapter, a detailed study of PVC and its properties, types of nanoclays and their properties, modification of nanoclays, production methods of composites, and nanocomposites of PVC/clay, their characterization, and applications have been performed. Herein, the types, properties, and applications of PVC/clay nanocomposites, as well as their challenges and future remarks, are reviewed.

Preparation and application of the thermo-/pH-/ ion-sensitive semi-IPN hydrogel based on chitosan

Chitosan based hydrogels with multiple stimulus responses have broad application prospects in many fields. Considering the advantages of semi interpenetrating network (IPN) technology and the special temperature and ion responsiveness of polymers containing zwitterionic groups, a semi-IPN hydrogel was prepared through in situ free radical polymerization of N,N-dimethyl acrylamide and [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl) ammonium hydroxide with polyethylene glycol dimethacrylate as a crosslinker and carboxymethyl chitosan as filler. The gel mass fraction and swelling ratio were measured, and the preparation conditions were optimized. The result indicated that the hydrogel possessed a unique thermo-/pH-/ ion-sensitive behavior. The swelling ratio increased with the increase of temperature and ion concentration, and showed a decreasing trend with the increase in pH. In addition, the hydrogel was stable when the stimuli changed. Adsorption behavior of the hydrogel to Eosin Y (EY) was systematically investigated. The adsorption process can be described well by the pseudo-second-order kinetic model and Langmuir isotherm model, indicating that it was a chemical adsorption. The experiments indicated that the hydrogel exhibited good antifouling and reusability features. Therefore, the semi-IPN hydrogel with antifouling properties and thermo-/pH-/ion-sensitivity can be easily manufactured is expected to find applications in water treatment fields.

Dewatering behavior and regulation mechanism of montmorillonite nanosheet in aqueous solution

Two-dimensional montmorillonite nanosheet (MMTNS) is desirable building block for fabricating multifunctional materials as due to its extraordinary properties. In practical applications, however, the concentration of MMTNS prepared by exfoliation is normally too low to be used for material assembling. The general thermal-concentration method is effective, however, it can be time-consuming and require a lot of energy. In this case, the remarkable dispersion stability of MMTNS is worth noting. Herein, the extraordinary dispersion stability of MMTNS derived from electrostatic and hydration repulsion was firstly revealed by molecular dynamics (MD) simulation, which caused the poor dewatering of MMTNS. Further, based on the surface and structural chemistry of MMTNS, a series of strategies, involving charge and cross-linked structure regulation on the edge surface, as well as electrical double-layer modulation and calcification modification based on the electrolytes, were proposed to inhibit the dispersion and enhance the aggregation of MMTNS. Intriguingly, a novel chemical, Tetraethylenepentamine (TEPA) was applied in the dewatering of MMTNS. The TEPA not only act as a cross-linker to bond with MMTNS into an easy-to-dewatering 3D network structure, but also act as a switch for effortless viscosity tuning. Meanwhile, the dual function of electrolytes for electrical double layer compression and calcification modification of MMTNS was investigated by DLVO theory and structural analyses. This work offers explicit directions for improving the dewatering performance of MMTNS to meet the requirements of practical implementation.

Magnetic Hydrogel Beads as a Reusable Adsorbent for Highly Efficient and Rapid Removal of Aluminum: Characterization, Response Surface Methodology Optimization, and Evaluation of Isotherms, Kinetics, and Thermodynamic Studies

Biopolymers such as alginate and gelatin have attracted much attention because of their exceptional adsorption properties and biocompatibility. The magnetic hydrogel beads produced and used in this study had a core structure composed of magnetite nanoparticles and gelatin and a shell structure composed of alginate. The combination of the metal-ion binding ability of alginate and the mechanical strength of gelatin in magnetic hydrogel beads presents a new approach for the removal of metal from water sources. The beads were designed for aluminum removal and fully characterized using various methods, including Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy-energy-dispersive X-ray spectroscopy, vibrating sample magnetometry, microcomputed tomography, and dynamic mechanical analysis. Statistical experimental designs were employed to optimize the parameters of the adsorption and recovery processes. Plackett-Burman Design, Box-Behnken Design, and Central Composite Design were used for identifying the significant factors and optimizing the parameters of the adsorption and recovery processes, respectively. The optimum parameters determined for adsorption are as follows: pH: 4, contact time: 30 min, adsorbent amount: 600 mg; recovery time: reagent 1 M HNO3; and contact time: 40 min. The adsorption process was described by using the Langmuir isotherm model. It reveals a homogeneous bead surface and monolayer adsorption with an adsorption capacity of 5.25 mg g-1. Limit of detection and limit of quantification values were calculated as 4.3 and 14 μg L-1, respectively. The adsorption process was described by a pseudo-second-order kinetic model, which assumes that chemisorption is the rate-controlling mechanism. Thermodynamic studies indicate that adsorption is spontaneous and endothermic. The adsorbent was reusable for 10 successive adsorption-desorption cycles with a quantitative adsorption of 98.2% ± 0.3% and a recovery of 99.4% ± 2.6%. The minimum adsorbent dose was determined as 30 g L-1 to achieve quantitative adsorption of aluminum. The effects of the inorganic ions were also investigated. The proposed method was applied to tap water and carboy water samples, and the results indicate that magnetic hydrogel beads can be an effective and reusable bioadsorbent for the detection and removal of aluminum in water samples. The recovery values obtained by using the developed method were quantitative and consistent with the results obtained from the inductively coupled plasma optical emission spectrometer.

Reclamation of real textile wastewater by sequential advanced oxidation and adsorption processes using corn-cob based materials

Wastewater management has become crucial for sustaining biological life in the near future. One of the key aspects is integration of treatment processes aiming reuse of treated water for many purposes instead of water discharge. This study focused on combining two different methods, photo-Fenton-like oxidation, and adsorption, for treatment of real textile wastewater to improve water quality to be reused for irrigation. The real textile wastewater was collected from a local plant and subjected to photo-Fenton-like oxidation and adsorption as hybrid process. The operational parameters were optimized for each step by assessing the water quality according to the domestic regulations for irrigation water. The photo-Fenton-like oxidation itself was not successful to achieve the targeted water quality for reuse whereas adsorption as an additional step made the treated water reusable in terms of organic content. But the treated water still contained a certain amount of salinity due to extreme salt usage in textile processing. It was concluded that the treated water at the end of hybrid process could be used for salinity resistant plants such as sugar beet, barley, and cotton which demonstrates a promising contribution to the circular economy for biomass.

Highly efficient removal of rare earth elements by two-dimensional titanium carbide nanosheets as impacted via water chemistry

The separation and recycling of rare earth elements (REEs) are very important owing to the high demand, limited resource, specific usages, and environmental issues. In this work, two-dimensional Ti3C2Tx MXene was introduced to remove REEs (Nd(III) and La(III)) from water, and its physicochemical properties were conducted by HRTEM, SEM-EDS, XRD, FTIR, and XPS. Various parameters, such as initial pH, REEs initial concentration, contact time, and temperature, were investigated by batch experiment, respectively. Furthermore, the adsorption kinetic and isotherm were examined to analyze the adsorption behavior and adsorption mechanism. Nd(III) and La(III) have a good affinity with Ti3C2Tx MXene surface functional groups (-F, -OH, and containing oxygen groups). The maximum adsorption capacities of Ti3C2Tx MXene for Nd(III) and La(III) were 229.85 mg/g and 175.83 mg/g at T = 333 K, respectively. The adsorption data of Nd(III) on Ti3C2Tx MXene fitted well with the Freundlich isotherms model and pseudo-second-order kinetic model. However, the best fitting for La(III) adsorption on Ti3C2Tx MXene was described by both pseudo-first-order and pseudo-second-order model. Thermodynamic study of Nd(III) and La(III) adsorption on Ti3C2Tx MXene showed that the reaction was a spontaneous and endothermic process. These results indicated Ti3C2Tx MXene had a great potential in extracting REEs from an aqueous solution.

β-CD-Induced Precipitation of Eriochrome Black T Recovered via CTAB-Assisted Foam Fractionation for Adsorption of Trace Cu(II)

In order to remove and reuse the ecotoxic dye Eriochrome black T (EBT) from dyeing wastewater, we used a process called cetyltrimethylammonium bromide (CTAB)-assisted foam fractionation. By optimizing this process with response surface methodology, we achieved an enrichment ratio of 110.3 ± 3.8 and a recovery rate of 99.1 ± 0.3%. Next, we prepared composite particles by adding β-cyclodextrin (β-CD) to the foamate obtained through foam fractionation. These particles had an average diameter of 80.9 μm, an irregular shape, and a specific surface area of 0.15 m²/g. Using these β-CD-CTAB-EBT particles, we were able to effectively remove trace amounts of Cu²⁺ ions (4 mg/L) from the wastewater. The adsorption of these ions followed pseudo-second-order kinetics and Langmuir isotherm models, and the maximal adsorption capacities at different temperatures were 141.4 mg/g at 298.15 K, 143.1 mg/g at 308.15 K, and 144.5 mg/g at 318.15 K. Thermodynamic analysis showed that the mechanism of Cu²⁺ removal via β-CD-CTAB-EBT was spontaneous and endothermic physisorption. Under the optimized conditions, we achieved a removal ratio of 95.3 ± 3.0% for Cu²⁺ ions, and the adsorption capacity remained at 78.3% after four reuse cycles. Overall, these results demonstrate the potential of β-CD-CTAB-EBT particles for the recovery and reuse of EBT in dyeing wastewater.

Highly efficient removal of hexavalent chromium by magnetic Fe-C composite from reed straw and electric furnace dust waste

Reed straw and electric furnace dust (EFD) waste were used to prepare magnetic Fe-C composite (EFD&C) by co-precipitation and high-temperature activation method to remove Cr(VI) from water. The magnetic EFD&C owned a large specific surface (536.61 m²/g) and a porous structure (micropores and mesopores), and had an efficient removal capacity for Cr(VI). Under conditions of pH (2), the addition amount of EFD&C (1 g/L), the adsorption time (760 min), and the temperature (45 °C), the maximum adsorption capacity reached 111.94 mg/g. The adsorption mechanism mainly attributed to chemical adsorption (redox), Cr(VI) reduced to Cr(III) by Fe(II) and Fe(0) (from Fe₃O₄ and Fe components in EFD) and surface functional groups of -OH, C = C, C-C and O-C = O (from biochar), and secondary attributed to physical adsorption, Cr(VI) and Cr(III) (from reduced Cr(VI)) adsorbed into the porous structure of EFD&C. This study provided a feasible solution for the preparation of adsorbents for adsorbing heavy metals from iron-containing metallurgical solid waste and biomass waste, which contributed to reducing the environmental pollution and lowering the cost of adsorbent preparation.

Design of multifunctional C@Fe3O4-MoO3 binary nanocomposite for applications in triphenylmethane textile dye amelioration via ultrasonic adsorption and electrochemical energy storage

In this paper, we present the synthesis of C@Fe₃O₄-MoO₃ binary composite were prepared through the facile hydrothermal process. The ultrasonic aided adsorption efficacy was evaluated by studying triphenylmethane dye's adsorption potential. The ultrasonic aided adsorption capacity towards crystal violet was 993.6 mg/g, which is remarkably higher and best fitted with the Langmuir isotherm model and followed pseudo-second-order kinetics. The electrochemical studies working electrode have been prepared with 80 wt% active material, 10 wt% carbon black, and 10% polyvinylidene difluoride to evaluate energy storage characteristics. The C@Fe₃O₄-MoO₃ demonstrated an excellent specific capacitance of 40.94 F/g with better retention and stability, making it a potential cathode material for next-generation electrochemical energy storage devices.

Co-Utilization of Sewage Sludge and Rice Husk in Ceramsite Preparation with Selective Adsorption Capacity to Pb

Realizing the green recycling of sludge is an important link to effectively solve the problem of sludge disposal. In this paper, sewage sludge (SS) and rice husk (RH) were utilized as raw materials in preparing novel ceramsite (SRC) for the treatment of lead-containing wastewater, and its adsorption mechanism was explored. The results showed that the optimal preparation conditions were 40% RH + 60% SS mixture, a sintering temperature of 1190 °C, and a sintering time of 20 min. The basic properties of SRC met Chinese artificial ceramsite filter material standards for water treatment (CJ/T 299-2008). Under optimum adsorption conditions (pH = 6, 1 g/L SRC dosage, 20 mg/L Pb(NO)3 concentration, 18 h), the removal rate of Pb2+ reached 94.7%, and the equilibrium adsorption capacity was 18.94 mg/g. The adsorption process was more consistent with the pseudo-second-order kinetic model and the Langmuir isotherm model, indicating that the adsorption process was dominated by chemisorption. Thermodynamic parameters (ΔH0 > 0, ΔG0 < 0, ΔS0 > 0) indicated that the adsorption reaction was spontaneous and endothermic. The possible adsorption mechanisms are as follows: (1) SRC is rich in layered mesoporous structure, which provides sufficient reaction sites for Pb adsorption; (2) the sintered lawsonite and muscovite can strongly attract Pb and then form a new phase (Pb10[Si2O7]3(OH)2); (3) Pb2+ can bond with the Si−O- bond in aluminosilicates, and the introduction of Pb elevates the degree of polymerization of aluminosilicates in turn, indicating that the adsorption process is stable.

Azo-functionalized superparamagnetic Fe3O4 nanoparticles: an efficient adsorbent for the removal of bromocresol green from contaminated water

Water contamination is regarded as one of the world's worst tragedies owing to the continual depletion of water resources suitable for drinking and agriculture. Researchers have recently been interested in developing novel and more effective adsorbents for wastewater purification. We report herein a magnetic adsorbent nanomaterial for the removal of the anionic dye bromocresol green (BCG) from wastewater. The adsorbent is based on superparamagnetic iron oxide (cubic Fe₃O₄) nanoparticles (SPIONs) coated with a high-molecular-weight azo dye synthesized via diazo coupling of vitamin B1 with a trisubstituted benzene derivative. The proposed adsorbent was characterized using scanning electron microscopy, FTIR and ¹H-NMR spectroscopy, mass spectrometry, dynamic light scattering, vibrating sample magnetometry, thermal analysis, and X-ray diffraction crystallography. At room temperature and pH 2.0, the synthesized adsorbent showed an average particle size of 65.9 ± 8.0 nm, a high magnetization saturation (65.58 emu g⁻¹), a high equilibrium adsorption capacity (36.91 mg g⁻¹). Adsorption of BCG was found to take place via a physisorption mechanism and followed a pseudo-second-order rate kinetics. Thermodynamic studies revealed that the adsorption process is enthalpy driven by hydrogen bonding and/or van der Waals interactions. After treating water samples with the suggested adsorbent, it can be easily removed from water using a strong external magnetic field.

An efficient adsorbent based on azo-dye-coated superparamagnetic Fe₃O₄ nanoparticles was synthesized for the removal of the anionic dye, bromocresol green, from wastewater.

The Adsorption Characteristics of Uranium(VI) from Aqueous Solution on Leonardite and Leonardite-Derived Humic Acid: A Comparative Study

The humic substance is a low-cost and effective adsorbent with abundant functional groups in remediating uranium (U) (VI)-contaminated water. In this research study, leonardite together with leonardite-derived humic acid (L-HA) was used to eliminate U(VI) from water under diverse temperatures (298, 308, and 318 K). L-HA showed a higher adsorption volume for U(VI) than leonardite. U adsorption was varied with pH and increased with temperature. The adsorption kinetics of L-HA had a higher determination coefficient (R²) for pseudo-second-order (R² > 0.993) and Elovich (R² > 0.987) models, indicating possible chemisorption-assisted adsorption. This was further supported with the activation energies (15.9 and 13.2 kJ/mol for leonardite and L-HA, respectively). Moreover, U(VI) equilibrium adsorption on leonardite was better depicted with the Freundlich model (R² > 0.970), suggesting heterogeneous U(VI) adsorption onto the leonardite surface. However, U(VI) adsorption onto L-HA followed the Langmuir equation (R² > 0.971), which implied the dominant role of monolayer adsorption in controlling the adsorption process. Thermodynamic parameters, including standard entropy change (ΔS⁰ > 0), Gibbs free energy (ΔG⁰ < 0), and standard enthalpy change (ΔH⁰ > 0), suggested a spontaneous and endothermal adsorption process. In addition, ionic species negatively affected U(VI) adsorption by leonardite and L-HA.