Micelles from PEO–PPO–PEO block copolymers as nanocontainers for solubilization of a poorly water soluble drug hydrochlorothiazide

Octa-Arginine-Conjugated Liposomal Nimodipine Incorporated in a Temperature-Responsive Gel for Nasoencephalic Delivery

Nimodipine is the primary clinical drug used to treat cerebral vasospasm following subarachnoid hemorrhage. Currently, tablets have low bioavailability when taken orally, and injections contain ethanol. Therefore, we investigated a new method of nimodipine administration, namely, nasoencephalic administration. Nasal administration of nimodipine was carried out by attaching the cell-penetrating peptide octa-arginine (R8) to liposomes of nimodipine and incorporating it into a temperature-sensitive in situ gel. The prepared liposomes and gels underwent separate evaluations for in vitro characterization. In vitro release exhibited a significant slow-release effect. In vitro toad maxillary cilia model, RPMI 2650 cytotoxicity, and in vivo SD rat pathological histotoxicity experiments showed that all the dosage from the groups had no significant toxicity to toad maxillary cilia, RPMI 2650 cells, and SD rat tissues and organs, and the cilia continued to oscillate up to 694 ± 10.15 min, with the survival rate of the cells being above 85%. A transwell nasal mucosa cell model and an isolated porcine nasal mucosa model were established, and the results showed that the osmolality of the R8-modified nimodipine liposomal gel to nasal mucosal cells and isolated porcine nasal mucosa was 30.41 ± 2.14 and 65.9 ± 7.34 μg/mL, respectively, which was significantly higher than that of the NM-Solution and PEGylated nimodipine liposome gel groups. Animal fluorescence imaging studies revealed that the R8-modified nimodipine liposomal gel displayed increased brain fluorescence intensity compared to the normal liposomal gel. Pharmacokinetic results showed that after transnasal administration, the AUC(0-∞) of the R8-modified nimodipine liposomal gel was 11.662 ± 1.97 μg·mL-1, which was significantly higher than that of the plain nimodipine liposomal gel (5.499 ± 2.89 μg·mL-1). Brain-targeting experiments showed that the brain-targeting efficiencies of the PEGylated nimodipine liposome gel and R8-modified PEGylated nimodipine liposome gels were 20.44 and 33.45, respectively, suggesting that R8/PEG/Lip-NM-TSG significantly increased the brain-targeting of the drug.

Binary Pluronics based mixed micellar systems: Effective solution for improved solubilization of Biochanin A

The present work was carried out to appraise the solubilization of Biochanin (BCA), a natural hydrophobic drug in pure Pluronics (P84, P123 and F127) as well as binary mixed micelles (P84-P123 and F127-P123) followed by an interactional study using various state of art techniques. The critical micelle concentration (CMC) of binary mixtures P84-P123 and F127-P123 was found to be significantly lower than pure Pluronics justifying the candidature of mixed micelles (MMs) as a better solubilizer for BCA. UV-visible studies revealed the enhanced solubility of BCA in P84-P123 (1:2) MMs (3.51 ± 0.087 mg/mL) and F127-P123 (1:2) MMs (2.94 ± 0.046 mg/mL) as compared to micelles of pure Pluronics (10% w/v), P84 (2.25 ± 0.039 mg/mL) and F127 (1.12 ± 0.036 mg/mL). Differential pulse voltammetry (DPV) results demonstrated significantly superior binding of BCA with P84-P123 (1:2) MM (Ka = 2.60 × 105 M-1) as compared to pure P84 (Ka = 1.415 × 105 M-1). Mixed micellization (P84-P123 (1:2)) leads to increase in micellar hydrodynamic diameter (Dh = 16.09 nm) as compared to pure Pluronic P84 micelles (Dh = 15.71 nm) which was further amplified (Dh = 17.69 nm) after BCA loading. Different formulations of pure and MMs were subjected to in vitro drug release and MMs were found to slow down BCA release as compared to pure Pluronics (P84, P123). The results obtained in this study proved that P84-P123 (1:2) MMs are superior and more effective for the solubilization of BCA than pure and other MMs. Thus, the examined MMs hold the potential for advancing the development of solubilization techniques for other hydrophobic drugs with significant pharmacological value.

Block Copolymer Encapsulation of Disarib, an Inhibitor of BCL2 for Improved Chemotherapeutic Potential

A chemical inhibitor of antiapoptotic protein, BCL2, known as Disarib, suffers poor solubility in aqueous environments; thereby limiting its potential as a chemotherapeutic agent. To overcome this limitation and enhance the therapeutic efficacy of Disarib, we have employed the encapsulation of this small molecule inhibitor within P123 copolymer matrix. Micelles were synthesized using a thin-film hydration technique, and a comprehensive analysis was undertaken to evaluate the resulting micelle properties, including morphology, particle size, intermolecular interactions, encapsulation efficiency, and in vitro release characteristics. This assessment utilized various physicochemical techniques including UV spectroscopy, FTIR spectroscopy, dynamic light scattering (DLS), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). Disarib-loaded P123 micelle formulation denoted as P123D exhibited a well-defined particle size of approximately 29.2 nm spherical core-shell morphology. Our investigations revealed a notable encapsulation efficiency of 75%, and we observed a biphasic release pattern for the encapsulated Disarib. Furthermore, our cytotoxicity assessment of P123D micelles against mouse breast adenocarcinoma, mouse lymphoma, and human leukemic cell lines showed 40-45% increase in cytotoxicity compared with the administration of Disarib alone in the breast adenocarcinoma cell line. Enhancement in the cytotoxicity of P123D was found to be higher or limited; however, it is important to observe that the encapsulation method significantly enhanced the aqueous solubility of Disarib as it has the best solubility in dimethyl sulfoxide (DMSO) in the unencapsulated state.

Effect of polylactic acid on the micellization of SDS and CTAB: physicochemical studies on surfactants aggregation

This study reports the aggregation behavior of polylactic acid (PLA) with ionic surfactants e.g. sodium dodecyl sulphate (SDS) and hexadecyltrimethylammonium bromide (CTAB) at different temperatures. Surface tension and conductivity techniques were used to investigate these physicochemical properties. Surface tension measurements were carried out to find out critical micelle concentration (CMC), free energy change of micellization (ΔG m), free energy change of adsorption (ΔG ads) and surface excess concentration (Γ). Conductivity measurements were used to determine CMC, degree of ionization (α) and degree of counter ion binding (β). The values of α and β obtained for SDS were (0.389 and 0.611 respectively), while for CTAB the values of α and β were (0.239 and 0.761 respectively). This type of electrostatic interactions is very important which can be applied in various industrial applications (e.g. pharmaceutical, industrial foaming, oil recovery etc.).

How Kosmotropic and Chaotropic Osmolytes Perturb the Properties of an Aqueous Solution of a Pluronic Block Copolymer?

Poloxamer 407 (P-407) composed of a poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (PEG-PPG-PEG) unit has two distinct microenvironments: the interior core formed by the PPG unit and the exterior shell formed by the PEG unit. In this work, we have used two fluorescent molecules coumarin-153 and 8-anilino-1-naphthalene sulfonic acid (ANS) of contrasting natures to characterize and probe the water dynamics in the core and corona regions of the copolymer by means of spectroscopic techniques, namely, absorption, fluorescence, and time-resolved fluorescence emission spectroscopy and Fourier transform infrared (FTIR) spectroscopy. Changes in the surface morphologies were characterized by using microscopic techniques. Further, two classes of osmolytes kosmotropic (betaine and sarcosine) and chaotropic (urea) known to perturb the water structure were added to aqueous solutions of P-407. Our studies reveal that the addition of kosmotropes decreases the critical micelle temperature (CMT) of the copolymer, whereas the chaotropic osmolyte increases the CMT. Steady-state studies reveal that the addition of the osmolytes to the copolymer increases the polarity of the micelle formed and hence results in the red shift in the ANS absorbance maximum. FTIR spectroscopy reveals that kosmotropes interact with the PEG moiety of the copolymer, whereas the chaotrope interacts with both the PEG and PPG moieties of the copolymer. Solvent relaxation studies produced less changes upon the addition of the kosmotropes, whereas a greater change in the relaxation time was observed in the presence of the chaotrope.

Effect of drug aceclofenac on physicochemical properties of mixed micellar systems

Abstract

In this article, the effect of the drug aceclofenac (ACF) on the properties of three mixed micellar systems are studied. The three systems were pluronic L64 + F127 (nonionic-nonionic), pluronic L64 + CTAB (cetyltrimethyl ammonium bromide), (nonionic-cationic) and L64 + SDS (Sodium dodecyl sulphate), (nonionic-anionic) combinations. The physicochemical parameters were characterized by different techniques such as UV visible spectroscopy, FTIR, conductance, DLS, and SEM. The presence of ACF affected the nonionic-ionic mixed micelles more than the nonionic-nonionic group as evidenced by UV spectroscopy. From the DLS measurement, it was observed that ACF enhanced the size of the single micelle of pluronic L64 from 98 to 168 nm. The size of the cationic mixed micelle with ACF displayed 329 nm and the anionic mixed one showed 291 nm suggesting enhanced entrapment efficiency of their mixed micelle compared to the single micelles. The size was also reconfirmed by SEM analysis. From the conductivity measurements of the two nonionic-ionic micellar systems, the counter ion binding constant β, and the thermodynamic parameters ΔG, ΔH, and ΔS were determined. The negative value of ΔG infers spontaneous binding between ACF and ionic mixed micelles.

Article highlights

Aceclofenac-loaded pluronic F108/L81 mixed polymeric micelles: effect of HLB on solubilization

Pluronic block copolymers have phase behavioural characteristics which are extensively studied for drug delivery applications. In this study, we explored hydrophilic pluronic F108 (HLB = 27), hydrophobic pluronic L81 (HLB = 2) and their mixed micelles acting as solubilising mediums for model drug aceclofenac. The drug solubilisation and interactions have been analysed using UV-visible spectroscopy, Fluorescence spectroscopy, Rheology studies, Fourier-transform infrared spectroscopy, Scanning electron microscope, Dynamic light scattering, Cloud point and partition coefficient measurements. The investigation from UV-spectrophotometry demonstrated that mixed pluronic entrapped greater number of aceclofenac molecules than both the neat pluronics at same concentration. Excimer formation was evidenced from fluorescence spectra with pyrene as a probe. The rheological studies showed difference in viscosity over low shear range. Studies on FTIR demonstrated probable bonding between the aceclofenac and mixed pluronic molecules. The DLS studies on mixed pluronic showed swelling of micellar diameter from 317.6 nm to 413.5 nm. Thermodynamic parameters of the above system revealed higher partition coefficient value for mixed pluronic and spontaneity in drug solubilisation. This study can be exploited to use a hydrophobic copolymeric micelle in mixed pluronic formulation for better drug solubilisation.

Mixed Poloxamer Nanomicelles for the Anticonvulsant Lamotrigine Drug: Solubility, Micellar Characterization, and In-Vitro Release Studies

Recently the applications of Poloxamers in drug development is promising as it facilitated the drug molecule for delivering to the correct place, at the correct time and in the correct amount. Poloxamers can form nanomicelles to encapsulate hydrophobic drugs in order to increase solubility, stability and facilitate delivery at target. In this context, the solubilization of anticonvulsant lamotrigine (LMN) drug in a chain of Poloxamers containing different polyethylene oxide and polypropylene oxide noieties were examined. The results showed better solubilization of LMN in Poloxamers contain low CMTs while poor with Poloxamers having high CMTs. Systematic investigation of two mixed Poloxamer nanomicelles (P407:P403 and P407:P105) for LMN bioavailability at body temperature (37 °C) were investigated. The solubility of LMN was enhanced in mixed P407:P403 nanomicelles with the amount of P403 and reduced in mixed P407:P105 nanomicelles with the amount of P105. LMN encapsulated mixed Poloxamer nanomicelles were found spherical in shape with ~25 nm D_h sizes. The In-Vitro release profiles of mixed Poloxamer nanomicelles demonstrated the biphasic model with initial burst release and then slowly release of LMN. Better biocompatibility of LMN in the mixed P407:P403 nanomicelles was confirmed with stability data. The results of this work were proven the mixed P407:P403 nanomicelles as efficient nanocarriers for LMN.

Effect of curcumin-encapsulated Pluronic® F-127 over duo-species biofilm of Streptococcus mutans and Candida albicans

To assess the effect of curcumin-encapsulated Pluronic^® F-127 (Cur-Plu) during antimicrobial photodynamic therapy (aPDT) over duo-species biofilm of Streptococcus mutans and Candida albicans. Thermal analysis, optical absorption, and fluorescence spectroscopy were evaluated. Minimum inhibitory concentration (MIC) and minimum bactericidal/fungal concentration were obtained. The biofilms were cultured for 48 h at 37 °C and treated according to the groups: P + M + L + (photosensitizer encapsulated with Pluronic^® F-127 + light); P + D + L + (photosensitizer incorporated in 1% DMSO + light); P - M + L + (no Pluronic^® F-127 + light); P - D + L + (1% DMSO + light); P - L + (Milli-Q water + light); P + M + L - (photosensitizer encapsulated with Pluronic^® F-127 no light); P + D + L - (photosensitizer in 1% DMSO, no light); P - M + L - (Pluronic^® F-127 no light); P - D + L - (1% DMSO, no light); P - L - (Milli-Q water, no light; negative control group); CHX (0.2% chlorhexidine, positive control group); and NYS (Nystatin). Dark incubation of 5 min was used. The groups that received aPDT were irradiated by blue LED (460 nm, 15 J/cm²). Cell viability of the biofilms was performed by colony-forming units (CFU/mL) and confocal microscopy. Two-way ANOVA followed by Tukey's post hoc test was used at a significance level of 5%. P + D + L + and P + M + L + groups exhibited better log-reduction for both Candida albicans and Streptococcus mutans biofilms than P - M + L + , P - L + , and P - D + L + experimental groups. Furthermore, P + M + L + and P + D + L + showed greater reduction for Candida albicans than for Streptococcus mutans. aPDT mediated by Cur-Plu can be a potential strategy for biofilm control against duo-species biofilm of Streptococcus mutans and Candida albicans.

Egg White Protein Carrier-Assisted Development of Solid Dispersion for Improved Aqueous Solubility and Permeability of Poorly Water Soluble Hydrochlorothiazide

Hydrochlorothiazide (HTZ) is a first-line drug used in the treatment of hypertension suffered from low oral bioavailability due to poor aqueous solubility and permeability. Hence, lyophilized egg white protein-based solid dispersion (HTZ-EWP SD) was developed to explore its feasibility as a solid dispersion carrier for enhanced aqueous solubility and permeability of HTZ. The HTZ-EWP SD was prepared using the kneading method. HTZ-EWP SD was characterized using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transforms infrared spectroscopy (FT-IR), powder X-ray diffractometer (PXRD), solubility, in vitro dissolution, and ex vivo permeation studies. The physico-chemical evaluation suggested the formation of the solid dispersion. Optimized HTZ-EWP SD4 drastically enhanced (~32-fold) aqueous solubility (~16.12 ± 0.08 mg/mL) over to pure HTZ (~ 0.51 ± 0.03 mg/mL). The dissolution study in phosphate buffer media (pH 6.8) revealed that HTZ-EWP SD4 significantly enhanced the release rate of HTZ (~ 87 %) over to HTZ (~ 25 %). The permeation rate of HTZ from optimized HTZ-EWP SD4 was enhanced significantly (~ 84 %) compared to pure HTZ (~ 24 %). Optimized HTZ-EWP-SD4 enhanced the rate of HTZ dissolution (~ 86 %) in FeSSIF (fed state simulated intestinal fluid), compared to a low dissolution rate (~ 72 %) in FaSSIF (fasted state simulated intestinal fluid) state after 2-h study. Obtained results conclude that lyophilized egg white protein can be utilized as an alternative solid dispersion carrier for enhancing the solubility and permeability of HTZ.

The Impact of Surfactant Composition and Surface Charge of Niosomes on the Oral Absorption of Repaglinide as a BCS II Model Drug

Background

Niosomes, bilayer vesicles formed by the self-assembly of nonionic surfactants, are receiving increasing attention as potential oral drug delivery systems but the impact of niosomal formulation parameters on their oral capability has not been studied systematically. The aim of this study was to investigate the impact of surfactant composition and surface charge of niosomes in enhancing oral bioavailability of repaglinide (REG) as a BCS II model drug.

Methods

Niosomes (13 formulations) from various nonionic surfactants having HLB in the range of 4–28 (Tweens, Spans, Brijs, Myrj, poloxamer 188, TPGS and Labrasol) were prepared and characterized concerning their loading efficiency, hydrodynamic diameter, zeta potential, drug release profile, and stability. The oral pharmacokinetics of the selected formulations were studied in rats (8 in vivo groups).

Results

The results revealed that type of surfactant markedly affected the in vitro and in vivo potentials of niosomes. The C_max and AUC values of REG after administration of the selected niosomes as well as the drug suspension (as control) were in the order of Tween 80> TPGS> Myrj 52> Brij 35> Span 60≈Suspension. Adding stearyl amine as a positive charge-inducing agent to the Tween 80-based niosomes, resulted in an additional increase in drug absorption and values of AUC and C_max were 3.8- and 4.7-fold higher than the drug suspension, respectively.

Conclusion

Cationic Tween 80-based niosomes may represent a promising platform to develop oral delivery systems for BCS II drugs.

pH interferes in photoinhibitory activity of curcumin nanoencapsulated with pluronic® P123 against Staphylococcus aureus

Microbial contamination control is a public health concern and challenge for the food industry. Antimicrobial technologies employing natural agents may be useful in the food industry for these purposes. This work aimed to investigate the effect of photodynamic inactivation using curcumin in Pluronic® P123 nanoparticles (Cur/P123) at different pH and blue LED light against Staphylococcus aureus. Bacterial photoinactivation was conducted using different photosensitizer concentrations and exposure times at pH 5.0, 7.2 and 9.0. A mixture design was applied to evaluate the effects of exposure time (dark and light incubation) on the photoinhibitory effect. S. aureus was completely inactivated at pH 5.0 by combining low concentrations of Cur/P123 (7.80-30.25 μmol/L) and light doses (6.50-37.74 J/cm²). According to the mathematical model, dark incubation had low significance in bacterial inactivation at pH 5.0 and 9.0. No effect in bacterial inactivation was observed at pH 7.2. Cur/P123 with blue LED was effective in inactivating S. aureus. The antimicrobial effect of photodynamic inactivation was also pH-dependent.

Stimuli-responsive In situ gelling system for nose-to-brain drug delivery

The diagnosis and treatment of neurological ailments always remain an utmost challenge for research fraternity due to the presence of BBB. The intranasal route appeared as an attractive and alternative route for brain targeting of therapeutics without the intrusion of BBB and GI exposure. This route directly and effectively delivers the therapeutics to different regions of the brain via olfactory and trigeminal nerve pathways. However, shorter drug retention time and mucociliary clearance curtail the efficiency of the intranasal route. The in situ mucoadhesive gel overthrow the limitations of direct nose-to-brain delivery by not only enhancing nasal residence time but also minimizing the mucociliary clearance and enzymatic degradation. This delivery system further improves the nasal absorption as well as bioavailability of drugs in the brain. The in situ mucoadhesive gel is a controlled and sustained release system that facilitates the absorption of various proteins, peptides and other larger lipophilic and hydrophilic moieties. Owing to multiple benefits, in situ gelling system has been widely explored to target the brain via nasal route. However, very few review works are reported which explains the application of in situ nasal gel for brain delivery of CNS acting moieties. Hence, in this piece of work, we have initially discussed the global statistics of neurological disorders reported by WHO and other reputed organizations, nasal anatomy, mechanism and challenges of nose-to-brain drug delivery. The work mainly focused on the use of different stimuli-responsive polymers, specifically thermoresponsive, pH-responsive, and ion triggered systems for the development of an effective and controlled dosage form, i.e., in situ nasal gel for brain targeting of bioactives. We have also highlighted the origin, structure, nature and phase transition behavior of the smart polymers found suitable for nasal administration, including poloxamer, chitosan, EHEC, xyloglucan, Carbopol, gellan gum and DGG along with their application in the treatment of neurological disorders. The article is aimed to gather all the information of the past 10 years related to the development and application of stimuli-responsive in situ nasal gel for brain drug delivery.

High-Silica Zeolites as Sorbent Media for Adsorption and Pre-Concentration of Pharmaceuticals in Aqueous Solutions

The present work focused on the use of high-silica commercial zeolites as sorbent media for pharmaceuticals in an aqueous matrix. As drug probes, ketoprofen, hydrochlorothiazide, and atenolol were selected, because of their occurrence in surface waters and effluents from wastewater treatment plants. Pharmaceuticals adsorption was evaluated for two Faujasite topology zeolites with Silica/Alumina Ratio 30 and 200. The selected zeolites were demonstrated to be efficient sorbents towards all investigated pharmaceuticals, thanks to their high saturation capacities (from 12 to 32% w/w) and binding constants. These results were corroborated by thermal and structural analyses, which revealed that adsorption occurred inside zeolite’s porosities, causing lattice modifications. Finally, zeolites have been tested as a pre-concentration media in the dispersive-solid phase extraction procedure. Recoveries higher than 95% were gained for ketoprofen and hydrochlorothiazide and approximately 85% for atenolol, at conditions that promoted the dissolution of the neutral solute into a phase mainly organic. The results were obtained by using a short contact time (5 min) and reduced volume of extraction (500 µL), without halogenated solvents. These appealing features make the proposed procedure a cost and time saving method for sample enrichment as well as for the regeneration of exhausted sorbent, rather than the more energetically expensive thermal treatment.

Temperature-Dependent Solubilization of the Hydrophobic Antiepileptic Drug Lamotrigine in Different Pluronic Micelles-A Spectroscopic, Heat Transfer Method, Small-Angle Neutron Scattering, Dynamic Light Scattering, and in Vitro Release Study

Pluronics (tri-block copolymers) have a significant role in the pharmaceutical industry and are being used to enhance the solubility and delivery of hydrophobic drugs in different marketed formulations. However, instability and unsatisfactory drug-loading capacity are the major weak spots of these pluronic micelles. The present research work is designed to solve the existing issues by the solubilization study of hydrophobic drugs in different pluronic micelles at variable temperatures. The solubilization of the hydrophobic antiepileptic drug lamotrigine (LAM) in five different pluronic micelles viz. P84, P85, F127, F108, and F68 was studied at different temperatures, 37, 47, and 57 °C, using UV-visible spectroscopy. The solubilization of LAM in pluronic micelles increased with the increase in temperature. Small-angle neutron scattering (SANS) measurements were used to observe the morphological and structural changes taking place in pluronics by increasing the temperature. The SANS results showed the morphological changes of spherical P84 micelles to prolate ellipsoidal micelles at 57 °C due to remarkable increase in the aggregation number. This morphological conversion was further confirmed by the heat transfer method (HTM) and dynamic light scattering (DLS) measurements. DLS measurements confirmed that LAM-loaded micelles showed a greater hydrodynamic diameter (D h) compared to unloaded micelles, assuring LAM solubilization in the pluronic micelles. The rate of controlled release of LAM from five different pluronic micelles was accessed by using different kinetic models to evaluate the in vitro release profile. This is the first report in which HTM measurements are established for the analysis of morphological changes in the thermoresponsive pluronic micelles in real time. The present work corroborates how we can control the drug-loading capacity, morphological structure of the drug carrier, as well as drug release by simply changing the temperature of pluronic micellar media.

Optimization and Evaluation of Beclomethasone Dipropionate Micelles Incorporated into Biocompatible Hydrogel Using a Sub-Chronic Dermatitis Animal Model

The current study is concerned with the development and characterization of mixed micelles intended for the dermal delivery of beclomethasone dipropionate, which is a topical corticosteroid used in the management of atopic dermatitis. Mixed micelles were prepared using thin-film hydration technique, employing different concentrations of pluronic L121 with either poloxamer P84 or pluronic F127 with different surfactant mixture-to-drug ratios. The prepared formulae were characterized concerning entrapment efficiency, particle size, and zeta potential. Two formulae were chosen for ex vivo skin deposition studies: one formulated using pluronic L121/poloxamer P84 mixture while the other using pluronic L121/pluronic F127 mixture. The optimum formula with the highest dermal deposition was subjected to morphological examination and was formulated as hydroxypropyl methylcellulose hydrogel. The hydrogel was evaluated regarding viscosity and was subjected to ex vivo deposition study in comparison with the commercially available cream Beclozone®. In vivo histopathological study was conducted for both the hydrogel and Beclozone® in order to evaluate their healing efficiency. In vivo histopathological study results showed that the prepared hydrogel successfully treated sub-chronic dermatitis in an animal model within a shorter period of time compared to Beclozone®, resulting in better patient compliance and fewer side effects.

Solubilization and interaction of ciprofloxacin with pluronics and their mixed micelles

The hydrophobic drug ciprofloxacin in the core of mixed micelles of Pluronic F108 and Pluronic L81.

Synergistic Effect of Binary Mixed-Pluronic Systems on Temperature Dependent Self-assembly Process and Drug Solubility

Mixed Pluronic micelles from very hydrophobic and very hydrophilic copolymers were selected to scrutinize the synergistic effect on the self-assembly process as well as the solubilization capacity of ibuprofen. The tendency of mixing behavior between parent copolymers was systematically examined from two perspectives: different block chain lengths at same hydrophilicity (L92 + F108, +F98, +F88, and +F68), as well as various hydrophobicities at the same PPO moiety (L92 + F88, +F87, and +P84). Temperature-dependent micellization in these binary systems was clearly inspected by the combined use of high sensitivity differential scanning calorimeter (HSDSC) and dynamic light scattering (DLS). Changes in heat capacity and size of aggregates at different temperatures during the whole micellization process were simultaneously observed and examined. While distinction of block chain length between parent copolymers increases, the monodispersity of the binary Pluronic systems decreases. However, parent copolymers with distinct PPO moieties do not affirmatively lead to non-cooperative binding, such as the L92 + P84 system. The addition of ibuprofen promotes micellization as well as stabilizes aggregates in the solution. The partial replacement of the hydrophilic Pluronic by a more hydrophobic Pluronic L92 would increase the total hydrophobicity of mixed Pluronics used in the system to substantially enhance the solubility of ibuprofen. The solubility of ibuprofen in the 0.5 wt % L92 + 0.368 wt % P84 system is as high as 4.29 mg/mL, which is 1.4 times more than that of the 0.868 wt % P84 system and 147 times more than that in pure water at 37 °C.

Free-radical reaction synthesis of carbon using nitrogenous organic molecules and CCl4

Carbon could be synthesized by the reaction between CCl₄ and nitrogenous organic molecules (DMF, DMAC, HMTA, DETA, DEA, EN, and NMP).

Chitosan microencapsulation of the dispersed phase of an O/W nanoemulsion to hydrochlorothiazide delivery

In view of biopharmaceutical limitations of hydrochlorothiazide (HCTZ), Trojan-type mucoadhesive systems were proposed, aiming to improve HCTZ pharmacological properties by modulating its release. Nanoemulsions were formed spontaneously by combining medium-chain triglycerides (Lipoid^® S75 and Pluronic^® F68) and high encapsulation efficiency was obtained. The mucoadhesive properties were provided by chitosan and microencapsulation of nanoemulsions in spray-dryer was successfully achieved by using Aerosil^® as wall material. The rapid redispersion of nanoemulsion in simulated fluids led to a fast and complete release of HCTZ in gastric medium. The pharmacodynamics of HCTZ was improved, extending the diuretic activity. Once a simple and low-energy method contributed to obtain stable mucoadhesive nanoemulsions, advantages in terms of production could also be achieved, allowing easy scaling up. This novel mucoadhesive Trojan particulate system of HCTZ showed to be a promising approach to overcome limitations in terms of absorption and consequently improve the therapeutic efficacy.

Effect of nucleoside analogue antimetabolites on the structure of PEO–PPO–PEO micelles investigated by SANS

Changes in properties and internal structures of PEO–PPO–PEO micelles upon adding drug molecules are observed by small-angle scattering techniques.