Characterization of a biosurfactant produced by Pseudomonas cepacia CCT6659 in the presence of industrial wastes and its application in the biodegradation of hydrophobic compounds in soil

Environmental risk substances in soil on seed germination: Chemical species, inhibition performance, and mechanisms

Nowadays, numerous environmental risk substances in soil worldwide have exhibited serious germination inhibition of crop seeds, posing a threat to food supply and security. This review provides a comprehensive summary and discussion of the inhibitory effects of environmental risk substances on seed germination, encompassing heavy metals, microplastics, petroleum hydrocarbons, salinity, phenols, essential oil, agricultural waste, antibiotics, etc. The impacts of species, concentrations, and particle sizes of various environmental risk substances are critically investigated. Furthermore, three primary inhibition mechanisms of environmental risk substances are elucidated: hindering water absorption, inducing oxidative damage, and damaging seed cells/organelles/cell membranes. To address these negative impacts, diverse effective coping measures such as biochar/compost addition, biological remediation, seed priming, coating, and genetic modification are proposed. In brief, this study systematically analyzes the negative effects of environmental risk substances on seed germination, and provides a basis for the comprehensive understanding and future implementation of efficient treatments to address this significant challenge and ensure food security and human survival.

Isolation, characterization, and multimodal evaluation of novel glycolipid biosurfactant derived from Bacillus species: A promising Staphylococcus aureus tyrosyl-tRNA synthetase inhibitor through molecular docking and MD simulations

Glycolipid-based biosurfactants (BSs), known for their intriguing and diverse properties, represent a largely uncharted territory in the realm of potential biomedical applications. This field holds great promise yet remains largely unexplored. This investigation provides new insights into the isolation, characterization, and comprehensive biomedical assessment of a novel glycolipid biosurfactant derived from Bacillus species, meeting the growing demand for understanding its multifaceted impact on various biomedical issues. Within this framework, two glycolipids, BG2A and BG2B, emerged as the most proficient strains in biosurfactant (BS) production. The biosurfactants (BSs) ascertained as glycolipids via thin layer chromatography (TLC) exhibited antimicrobial activity against S. aureus and E. coli. Both isolates exhibited anticancer effects against cervical carcinoma cells and demonstrated significant anti-biofilm activity against V. cholerae. Moreover, molecular docking and molecular dynamics (MD) simulations were employed to explore their antimicrobial resistance properties against Tyrosyl-tRNA synthetase (TyrRS) of Staphylococcus aureus, a well-annotated molecular target. Characterization and interpretation using Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (1H and 13C NMR) confirmed that the BSs produced by each strain were glycolipids. These findings suggest that the isolated BSs can serve as effective agents with antibiofilm, antimicrobial, antioxidant, and anticancer properties, in addition to their considerable antibacterial resistance attributes.

Chemical and biological evaluation of biosurfactant fractions from Wickerhamomyces anomalus CCMA 0358

Biosurfactants (BS) are becoming a solution for today's world since they are considered a reasonable and eco-friendly option for use in products that require surfactants. This study aimed to evaluate the antibacterial activity of purified fractions containing biosurfactants produced by the yeast Wickerhamomyces anomalus CCMA 0358 using waste cooking oil (WCO) as substrate. Mixed fractions were separated and characterized by TLC, MPLC, GC-MS, LC-OMS, LC-SQMS, FTIR, 1H, 13C, DEPT 135, COSY, HSQC, and HMBC. The results confirmed the presence of palmitic acid and oleic acid fatty acids, derived from the core biosurfactant structure; however, the core could not be identified. The crude biosurfactant and its purified fractions were evaluated against pathogenic bacteria, and the purified fractions of the biosurfactant are more efficient at inhibitory and bactericidal activities than the crude biosurfactant. To the best of our knowledge, this is the first study that evaluated the antimicrobial activity of purified fractions of biosurfactants produced by the species Wickerhamomyces anomalus. Therefore, the purification of biosurfactants can emerge as an interesting alternative to increase the bioactivity of the compounds and ensure greater efficiency and biotechnological employability. KEY POINTS: • Successful production of a biosurfactant using a renewed carbon source. • Evaluation of the antimicrobial activity of purified fractions of BS. • Separated fractions of the BS are more efficient against bacteria than the crude BS.

Microbial surfactants: characteristics, production and broader application prospects in environment and industry

Microbial surfactants are green molecules with high surface activities having the most promising advantages over chemical surfactants including their ability to efficiently reducing surface and interfacial tension, nontoxic emulsion-based formulations, biocompatibility, biodegradability, simplicity of preparation from low cost materials such as residual by-products and renewable resources at large scales, effectiveness and stabilization under extreme conditions and broad spectrum antagonism of pathogens to be part of the biocontrol strategy. Thus, biosurfactants are universal tools of great current interest. The present work describes the major types and microbial origin of surfactants and their production optimization from agro-industrial wastes in the batch shake-flasks and bioreactor systems through solid-state and submerged fermentation industries. Various downstream strategies that had been developed to extract and purify biosurfactants are discussed. Further, the physicochemical properties and functional characteristics of biosurfactants open new future prospects for the development of efficient and eco-friendly commercially successful biotechnological product compounds with diverse potential applications in environment, industry, biomedicine, nanotechnology and energy-saving technology as well.

Biotechnological potential of microbial bio-surfactants, their significance, and diverse applications

Globally, there is a huge demand for chemically available surfactants in many industries, irrespective of their detrimental impact on the environment. Naturally occurring green sustainable substances have been proven to be the best alternative for reducing reliance on chemical surfactants and promoting long-lasting sustainable development. The most frequently utilized green active biosurfactants, which are made by bacteria, yeast, and fungi, are discussed in this review. These biosurfactants are commonly originated from contaminated sites, the marine ecosystem, and the natural environment, and it holds great potential for environmental sustainability. In this review, we described the importance of biosurfactants for the environment, including their biodegradability, low toxicity, environmental compatibility, and stability at a wide pH range. In this review, we have also described the various techniques that have been utilized to characterize and screen the generation of microbial biosurfactants. Also, we reviewed the potential of biosurfactants and its emerging applications in the foods, cosmetics, pharmaceuticals, and agricultural industries. In addition, we also discussed the ways to overcome problems with expensive costs such as low-cost substrate media formulation, gravitational techniques, and solvent-free foam fractionation for extraction that could be employed during biosurfactant production on a larger scale.

In vitro nematicidal and acaricidal effect of biosurfactants produced by Bacillus against the root-knot nematode Nacobbus aberrans and the dust mite Tyrophagus putrescentiae

In the present study, the nematicidal and acaricidal activity of three biosurfactants (BS) produced by strains of the Bacillus genus was evaluated. The BS produced by the Bacillus ROSS2 strain presented a mortality of 39.29% in juveniles (J2) of Nacobbus aberrans at a concentration of 30 mg/mL, this same strain is the one that presented the highest mortality in Tyrophagus putrescentiae, which was 57.97% at a concentration of 39 mg/mL. The BS were qualitatively identified by thin layer chromatography and are lipid in nature based on the retention factor (Rf). While the GC-MS analysis identified two main compounds that are 4,7-Methano-1H-indene-2,6-dicarboxylic acid, 3a,4,7,7a-tetrahydro-1, and Methyl 4-(pyrrol-1-yl)-1,2,5-oxadiazole-3-carboxylate1, which is the polar part indicated by the presence of dicarboxylic acid and carboxylate groups; while the non-polar portion can be interpreted as a hydrocarbon chain of variable length. Based on the present results, BS can be an alternative for the biocontrol of the root-knot nematode N. aberrans and the mite T. putrescentiae.

Use of surfactants in biodegradation of hydrophobic compounds: A review

Industrial development has led to immense emission and accumulation of hydrophobic organic compounds (HOC) in the environment. Primarily, they include petroleum hydrocarbons, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). The extensive use of hydrophobic pesticides in agriculture led to the contamination of soil, air and water. Many of the hydrophobic substances are dangerous for the biota due to their high toxicity and carcinogenic and mutagenic activity. In addition to their widespread use, the possible adverse effects are also determined by their resistance to decomposition, including the biological one, which defines their long-term persistence in soil, water and other media. The impact of HOC on ecosystems poses a potential threat not only to the environment but also to human health. Numerous studies were devoted to the remediation of soils polluted with HOC. The approaches to remediation can be conditionally divided into mechanical, chemical and bio-methods, with the former two being widely used in the past. Bioremediation methods proved more efficient and, as a rule, more cost-effective and environmentally friendly. In recent years, the good efficiency of solubilizing agents in bioremediation processes has been demonstrated. Various surfactants have become widely popular due to their ability to increase desorption, water solubility and microbial bioavailability of HOC. In this brief review, state-of-the-art literature data on the biodegradation of hydrophobic organic compounds using surfactants were considered.

Anti-oxidative property of xylolipid produced by Lactococcus lactis LNH70 and its potential use as fruit juice preservative

In the present study, 20 lactic acid bacteria (LAB) were isolated from different fruit juices, milk, and milk products. Based on preliminary screening methods like emulsification index, oil displacement method, hemolysis, and reduction in surface tension, strain LNH70 was selected for further studies. Further, it was evaluated for preliminary probiotic characteristics, identified by 16 s rRNA sequencing as Lactococcus lactis, submitted to NCBI, and an accession number was obtained (MH174454). In addition, LNH70 was found to tolerate over wide range of temperatures (10-45 °C), pH (3-10), NaCl (up to 9%), bile (0.7%), and phenol (0.1%) concentrations. Further, optimization studies at flask level revealed that lactose as carbon source, peptone as organic nitrogen, and inorganic nitrogen (ammonium sulfate) enhanced biosurfactant production. Chemical composition of purified biosurfactant obtained from LNH70 was characterized by various physico-chemical analytical techniques and identified as xylolipid. Xylolipid biosurfactant exhibited anti-adhesion activity against food borne pathogens in in vitro conditions. Its anti-oxidative property by 1, 1-diphenyl-2-picrylhydrazyl (DPPH), 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid (ABTS), and ferric reducing antioxidant power (FRAP) radical scavenging activity was found in range of 60.76 ± 0.5 to 83.50 ± 0.73%. Furthermore, xylolipid (0.05, 0.1, 0.3 mg/mL) when used for its potential as orange and pineapple juices preservation revealed miniature changes in the physico-chemical parameters evaluated in this study. However, the microbial population slightly lowered when xylolipid was used at 0.3 mg/mL after 5th day. Hence, this study supports the potential use of biosurfactant from L. lactis for its application as food preservative.

The release of petroleum hydrocarbons from a saline-sodic soil by the new biosurfactant-producing strain of Bacillus sp

Adsorption of old-aged petroleum hydrocarbons to the soil solid phase, which causes biosurfactant loss of performance, is among the limiting factors for the remediation of the saline-sodic soils contaminated with petroleum. Therefore, to find a functional biosurfactant in oil-contaminated saline-sodic soils, the efficiency of 39 bacteria isolated from petroleum-contaminated soils was evaluated. The strains were cultured in the Bushnell-Haas medium, and the produced biosurfactants and bioemulsifiers in this medium were extracted using chloroform/methanol and ethyl acetate extraction methods, respectively. Their partial purification was performed by column chromatography, and eventually, their performance in releasing TPH from the contaminated soil was evaluated. The soil test results revealed that the highest TPH releases due to the effects of the biosurfactants and bioemulsifier produced from SHA302, SH21, and SH72 isolates were 42.4% ± 0.2, 21.6% ± 0.15 and 24.3% ± 0.91, respectively. Based on the 16S rRNA gene sequence, the SHA302 strain showed 93.98% phylogenetic similarity with Bacillus pumilus strain ATCC 7061. The Fourier transform infrared spectroscopy and thin-layer chromatography results proved that the biosurfactants produced by isolates SHA302, SH21 and SH72 showed lipopeptide, glycolipoprotein and glycoprotein natures, respectively. The performance of the biosurfactant produced by SHA302 isolate indicated that it could be used as a good candidate for releasing TPH from saline-sodic soils with old contamination and facilitating the degradation of hydrocarbons.

Impacts of groundwater level fluctuation on soil microbial community, alkane degradation efficiency and alkane-degrading gene diversity in the critical zone: Evidence from an accelerated water table fluctuation simulation

Petroleum hydrocarbons are hazardous to ecosystems and human health, commonly containing n-alkanes and polycyclic aromatic hydrocarbons. Previous researches have studied alkane degraders and degrading genes under aerobic or anaerobic conditions, but seldom discussed them in the intermittent saturation zone which is a connective area between the vadose zone and the groundwater aquifer with periodic alteration of oxygen and moisture. The present study investigated the difference in alkane degradation efficiency, bacterial community, and alkane degrading gene diversity in aerobic, anaerobic, and aerobic-anaerobic fluctuated treatments. All biotic treatments achieved over 90% of n-alkane removal after 120 days of incubation. The removal efficiencies of n-alkanes with a carbon chain length from 16 to 25 were much higher in anaerobic scenarios than those in aerobic scenarios, explained by different dominant microbes between aerobic and anaerobic conditions. The highest removal efficiency was found in fluctuation treatments, indicating an accelerated n-alkane biodegradation under aerobic-anaerobic alternation. In addition, the copy numbers of the 16S rRNA gene and two alkB genes (alkB-P and alkB-R) declined dramatically when switched from aerobic to anaerobic scenarios and oppositely from anaerobic to aerobic conditions. This suggested that water level fluctuation could notably change the presence of aerobic alkane degrading genes. Our results suggested that alkane degradation efficiency, soil microbial community, and alkane-degrading genes were all driven by water level fluctuation in the intermittent saturation zone, helping better understand the effects of seasonal water table fluctuation on the biodegradation of petroleum hydrocarbons in the subsurface environment.

Response of soil microbial communities to petroleum hydrocarbons at a multi-contaminated industrial site in Lanzhou, China

Total petroleum hydrocarbon (TPH) contamination poses threats to ecological systems and human health. Many studies have reported its negative impacts on soil microbes, but limited information is known about microbial change and response to multiple TPH contamination events. In this study, we investigated TPH contamination level, microbial community structure and functional genes at a multi-contaminated industrial site in Lanzhou, where a benzene spill accident caused the drinking water crisis in 2014. TPHs distribution in soils and groundwater indicated multiple TPH contamination events in history, and identified the spill location where high TPH level (6549 mg kg^-1) and high ratio of low-molecular-weight TPHs (>80%) were observed. In contrast, TPH level was moderate (349 mg kg^-1) and the proportion of low-molecular-weight TPHs was 44% in soils with a long TPH contamination history. After the spill accident, soil bacterial communities became significant diverse (p = 0.047), but the dominant microbes remained the same as Pseudomonadaceae and Comamonadaceae. The abundance of hydrocarbon-degradation related genes increased by 10-1000 folds at the site where the spill accident occurred in multi-contaminated areas and was significantly related to 2-ring PAHs. Such changes of microbial community and hydrocarbon-degradation related genes together indicated the resilience of soil indigenous microbes toward multiple contamination events. Our results proved the significant change of bacterial community and huge shift of hydrocarbon-degradation related genes after the spill accident (multiple contamination events), and provided a deep insight into microbial response at industrial sites with a long period of contamination history.

Biosurfactant Production by Bacillus amyloliquefaciens C11 and Streptomyces lavendulae C27 Isolated from a Biopurification System for Environmental Applications

Biosurfactant-producing bacteria can be found in contaminated environments such as biopurification systems (BPS) for pesticide treatments. A total of 18 isolates were screened to determine their ability to produce extracellular biosurfactants, using olive oil as the main carbon source. Out of the eighteen isolates, two strains (C11 and C27) were selected for biosurfactant production. The emulsification activities of the C11 and C27 strains using sunflower oil was 58.4 and 53.7%, respectively, and 46.6 and 48.0% using olive oil. Using molecular techniques and MALDI-TOF, the strains were identified as Bacillus amyloliquefaciens (C11) and Streptomyces lavendulae (C27). The submerged cultivation of the two selected strains was carried out in a 1 L stirred-tank bioreactor. The maximum biosurfactant production, indicated by the lowest surface tension measurement, was similar (46 and 45 mN/m) for both strains, independent of the fact that the biomass of the B. amyloliquefaciens C11 strain was 50% lower than the biomass of the S. lavendulae C27 strain. The partially purified biosurfactants produced by B. amyloliquefaciens C11 and S. lavendulae C27 were characterized as a lipopeptide and a glycolipid, respectively. These outcomes highlight the potential of the selected biosurfactant-producing microorganisms for improving pesticides’ bioavailability and therefore the degradational efficacy of BPS.

A critical review on the development of wax inhibiting agent in facilitating remediation process of contaminated groundwater

Transportation of crude oil and refined petroleum is the main function of pipeline system in petroleum industry. Unfortunately, wax precipitation has become a serious problem for the petroleum industry where it causes pipeline blockage and eventually results in operational catastrophe. Up-to-date, the technique used to mitigate wax deposition by injecting chemical wax inhibiting agent remains a debate amongst researchers. This review addresses the evolution of chemical wax inhibitor generations started from polymer-based in the early 1980s, followed by biosurfactant-based in the late 1990s and finally plant-based or agricultural-based in recent years. Pivoting to environmental impact, petroleum industry is amidst finding a green wax inhibiting agent to solve wax deposition problem that occurs during the transportation of crude oil whilst facilitating the remediation process of contaminated groundwater.

Study on a Strain of Lysinibacillus sp. with the Potential to Improve the Quality of Oil Sands

A strain of Lysinibacillus sp., named as Y316, can degrade heavy fractions such as resins and asphaltenes in oil sand. We used Y316 to degrade oil sand samples for 35 days. After bacterial degradation, the oil sand degradation efficiency was 5.88%, while the degradation efficiency of the control group was only 0.29% under the same conditions. Compared with the control group, the saturated content of oil sand in the degradation group increased from 9.56 to 14.39%. After degradation, the resin and asphaltene fractions decreased by 5.34 and 4.77%, respectively. The results of the vaporizable fraction analysis also confirmed the degradation of heavy fractions and the formation of light fractions. After 35 days of degradation, the vaporizable fractions of saturates increased by 3.76 times. The results indicate that Y316 has great significance for improving the quality of oil sands and assisting in oil sand exploitation.

Potential biodegradation of Tapis Light Crude Petroleum Oil, using palm oil mill effluent final discharge as biostimulant for isolated halotolerant Bacillus strains

Petroleum hydrocarbon pollution in marine waters has been an extremely significant environmental and health issue worldwide. This study aims at constructing an efficient indigenous bacterial consortium to biodegrade Tapis Light Crude Petroleum Oil (TLCO). The local agro-industrial wastewater of palm oil mill effluent final discharge (POME FD) was used as biostimulant to enhance the biodegradation efficiency. In this study, three TLCO degrading bacteria were isolated from seawater samples collected. Molecular identification using 16S rRNA genes sequencing was done and results show that these isolated strains belong to: Bacillus tropicus, Bacillus licheniformis and Bacillus subtilis. Bacterial consortium tested using four different concentrations of POME FD (0.1, 0.25, 0.5, and 1%) as biostimulant and TLCO (0.5 and 1.0%) degradation capability was investigated. The residual TLCO in culture medium after 40 days was analysed. The results confirmed that POME FD dosage of 0.25% is optimum for the bacterial consortium and can degrade 99.85% of TLCO at 0.5%. However, TLCO degradation with POME FD dosage (0.25%) in TLCO (1.0%) was found optimum, with biodegradation reaching up to 95.23% in 40 days. This study is a beginning for the future development of a consortium of petroleum hydrocarbon degrading bacteria to mitigate oil spills in the Malaysian shoreline.

A review on new aspects of lipopeptide biosurfactant: Types, production, properties and its application in the bioremediation process

Nowadays, the worldwide search regarding renewable products from natural resources is increasing due to the toxicity of chemical counterparts. Biosurfactants are surface-active compounds that contain several physiological functions that are used in industries like food, pharmaceutical, petroleum and agriculture. Microbial lipopeptides have gained more attention among the researchers for their low toxicity, efficient action and good biodegradability when compared with other surfactants. Because of their versatile properties, lipopeptide compounds are utilized in the remediation of organic and inorganic pollutants. This review presented a depth evaluation of lipopeptide surfactants in the bioremediation process and their properties to maintain a sustainable environment. Lipopeptide can acts as a replacement to chemical surfactants only if they meet industrial-scale production and low-cost substrates. This review also demonstrated the production of a lipopeptide biosurfactant from a low-cost substrate and depicted plausible techniques to manage the substrate residues to determine its ability in the different applications particularly in the bioremediation process.

Bioremediation of Total Petroleum Hydrocarbons (TPH) by Bioaugmentation and Biostimulation in Water with Floating Oil Spill Containment Booms as Bioreactor Basin

A crude oil spill is a common issue during offshore oil drilling, transport and transfer to onshore. Second, the production of petroleum refinery effluent is known to cause pollution due to its toxic effluent discharge. Sea habitats and onshore soil biota are affected by total petroleum hydrocarbons (TPH) as a pollutant in their natural environment. Crude oil pollution in seawater, estuaries and beaches requires an efficient process of cleaning. To remove crude oil pollutants from seawater, various physicochemical and biological treatment methods have been applied worldwide. A biological treatment method using bacteria, fungi and algae has recently gained a lot of attention due to its efficiency and lower cost. This review introduces various studies related to the bioremediation of crude oil, TPH and related petroleum products by bioaugmentation and biostimulation or both together. Bioremediation studies mentioned in this paper can be used for treatment such as emulsified residual spilled oil in seawater with floating oil spill containment booms as an enclosed basin such as a bioreactor, for petroleum hydrocarbons as a pollutant that will help environmental researchers solve these problems and completely clean-up oil spills in seawater.

Investigation of biosurfactants produced by three indigenous bacterial strains, their growth kinetics and their anthracene and fluorene tolerance

The study explored the polycyclic aromatic hydrocarbon tolerance of indigenous biosurfactant producing microorganisms. Three bacterial species were isolated from crude oil contaminated sites of Haldia, West Bengal. The three species were screened for biosurfactant production and identified by 16S rRNA sequencing as Brevundimonas sp. IITISM 11, Pseudomonas sp. IITISM 19 and Pseudomonas sp. IITISM 24. The strains showed emulsification activities of 51%, 57% and 63%, respectively. The purified biosurfactants were characterised using FT-IR, GC-MS and NMR spectroscopy and found to have structural similarities to glycolipopeptides, cyclic lipopeptides and glycolipids. The biosurfactants produced were found to be stable under a wide range of temperature (0-100 °C), pH (4-12) and salinity (up to 20% NaCl). Moreover, the strains displayed tolerance to high concentrations (275 mg/L) of anthracene and fluorene and showed a good amount of cell surface hydrophobicity with different hydrocarbons. The study reports the production and characterisation of biosurfactant by Brevundimonas sp. for the first time. Additionally, the kinetic parameters of the bacterial strains grown on up to 300 mg/L concentration of anthracene and fluorene, ranged between 0.0131 and 0.0156 µ_max (h^-1), while the K_s(mg/L) ranged between 59.28 and 102.66 for Monod's Model. For Haldane-Andrew's model, µ_max (h^-1) varied between 0.0168 and 0.0198. The inhibition constant was highest for Pseudomonas sp. IITISM 19 on anthracene and Brevundimonas sp. IITISM 11 on fluorene. The findings of the study suggest that indigenous biosurfactant producing strains have tolerance to high PAH concentrations and can be exploited for bioremediation purposes.

Enhancement of ethylbenzene removal from contaminated gas and corresponding mechanisms in biotrickling filters by a biosurfactant from piggery wastewater

This study prepared a biosurfactant by using piggery wastewater to enhance ethylbenzene removal from contaminated gas in a biotrickling filter (BTF). Experiments were conducted to investigate the enhancement of ethylbenzene removal and the biofilm characteristics in present of the biosurfactant. Results demonstrated that the optimal biosurfactant concentration was 0.1 CMC and the corresponding ethylbenzene removal rate was 87.2%, much higher than that (68.9%) achieved in free of biosurfactant. The inlet ethylbenzene concentration and the empty bed residence time (EBRT) affected ethylbenzene removal as well. In present of 0.1 CMC of biosurfactant, ethylbenzene removal rate decreased from 87.2% to 72.2% with the increasing inlet ethylbenzene from 1000 to 2200 mg/m³, and decreased from 91.1% to 42.7% with the EBRT shorten from 30 to 7.5 s. For the enhancement mechanisms of ethylbenzene removal in BTF, the biosurfactant changed the contents of extracellular polymers (EPS) and decreased negative surface charge of the biofilm in the BTF, which improved the mass transfer of ethylbenzene to biofilm and facilitated the aggregation of microbes, and further improved the removal of ethylbenzene. All in all, the biosurfactant would be a feasible way to enhance the removal of ethylbenzene by the BTF.

Characterization and application of rhamnolipid from Pseudomonas plecoglossicida BP03

The production of rhamnolipid (glycolipid) biosurfactant was achieved under optimized conditions from newly isolated bacteria (Pseudomonas plecoglossicida BP03) from rice mill effluent. The isolated biosurfactant was structurally characterized using FTIR and NMR spectroscopic studies. The obtained biosurfactant (1·39 g l^-1 ) showed a variety of applications including larvicidal and pupicidal activity against malarial vector (Anopheles sunadicus). It also exhibited antimicrobial activity against human pathogens, and possessed potent anti-biofilm activity against Staphylococcus aureus, Bacillus subtilis and Aeromonas hydrophila. The obtained biosurfactant showed a dose-dependent inhibition of exopolymeric substance (EPS) and growth curve in S. aureus. Furthermore, the cytotoxicity assays revealed that the biosurfactant exhibit a cytotoxic potency against the human fibroblastic sarcoma cells Ht-1080. An in silco analysis was also performed using Schrodinger maestro 9.3 against surface protein (SasG) of S. aureus, and the resultant analysis revealed an interactive docking score of -3·4 kcal mol^-1 . The obtained result indicates that the synthesized economically viable biosurfactant ensures excellent applications towards various fields.

Structural and Physicochemical Characterization of Rhamnolipids produced by Pseudomonas aeruginosa P6

Rhamnolipids are important biosurfactants for application in bioremediation, enhanced oil recovery, pharmaceutical, and detergent industry. In this study, rhamnolipids extracted from P. aeruginosa P6 were characterized to determine their potential fields of application. Thin-layer chromatographic analysis of the produced rhamnolipids indicated the production of two homologues: mono- and di-rhamnolipids, whose structures were verified by 1H and 13C nuclear magnetic resonance spectroscopy. Additionally, high performance liquid chromatography-mass spectrometry identified seven different rhamnolipid congeners, of which a significantly high proportion was di-rhamnolipids reaching 80.16%. Rha-Rha-C10-C10 was confirmed as the principal compound of the rhamnolipid mixture (24.30%). The rhamnolipids were capable of lowering surface tension of water to 36 mN/m at a critical micelle concentration of 0.2 g/L, and exhibited a great emulsifying activity (E24 = 63%). In addition, they showed excellent stability at pH ranges 4-8, NaCl concentrations up to 9% (w/v) and temperatures ranging from 20 to 100 °C and even after autoclaving. These results suggest that rhamnolipids, produced by P. aeruginosa P6 using the cheap substrate glycerol, are propitious for biotechnology use in extreme and complex environments, like oil reservoirs and hydrocarbon contaminated soil. Moreover, P. aeruginosa P6 may be considered, in its wild type form, as a promising industrial producer of di-RLs, which have superior characteristics for potential applications and offer outstanding commercial benefits.

Recent advancements in the production of rhamnolipid biosurfactants by Pseudomonas aeruginosa

Rhamnolipid (RL) biosurfactant which is produced by Pseudomonas species is one of the most effective surface-active agents investigated in the literature. Over the years, many efforts have been made and an array of techniques has been developed for the isolation of RL produced strains as well as RL homolog characterization. Reports show that RL productivity by the best-known producer, Pseudomonas aeruginosa, is very diverse, from less than 1 gr/l to more than 200 g L-1. There are some major parameters that can affect RL productivity. These are culture conditions, medium composition, the mode of operation (batch, fed-batch and continuous), bioengineering/gene manipulation and finally extraction methods. The present paper seeks to provide a comprehensive overview on the production of rhamnolipid biosurfactant by different species of Pseudomonas bacteria. In addition, we have extensively reviewed their potential for possible future applications.

Valorization of xylose-rich hydrolysate from rice straw, an agroresidue, through biosurfactant production by the soil bacterium Serratia nematodiphila

Biosurfactants, amphiphilic compounds that reduce interfacial tension in oil-aqueous mixtures, are used in the petroleum, pharmaceutical, food, and agriculture industries. Fermentative production of biosurfactants requires expensive sugar or lipid substrates. Lignocellulosic biomass is a relatively cheap and abundant agricultural residue that can be used as an alternative substrate. Currently, several million tonnes of rice and wheat straw are generated globally as agricultural residues, most of which is disposed by open-field burning thereby leading to severe environmental pollution. This study aimed to produce biosurfactants in xylose-rich hydrolysates generated from rice straw. The hydrolysate is also a byproduct of 2G biofuel processes that often goes underutilized. A soil bacterium capable of growing and producing biosurfactants in rice straw hydrolysates, which typically contain growth-inhibitory compounds such as furfural and hydroxymethyl furfural, was isolated. Interestingly, the organism, identified as Serratia nematodiphila, exhibited higher glycolipid formation (4.5 ± 0.6 gL^-1) in xylose-rich hydrolysate than in glucose-rich enzymatic hydrolysate (3.1 ± 0.2 gL^-1) despite the higher bacterial cell density observed with the latter. The biosurfactants were thermostable and possessed promising emulsifying property and anti-microbial activity against bacteria and yeast. Further optimization of C:N resulted in a 2.8-fold increase in glycolipid production from xylose-rich hydrolysates. This study demonstrates the production of glycolipid biosurfactants from lignocellulosic biomass, a low-cost substrate and offers a plausible strategy for the management of these residues. Further, it also provides insights into the generation of additional high-value compounds in a bioethanol biorefinery to improve its commercial feasibility.

Identification and Characterization of Lipopeptide Biosurfactant Producing Microbacterium sp Isolated from Brackish River Water

BACKGROUND

Bioremediation has taken its call for removing pollutants for years. The oilcontaminated surroundings are majorly hazardous for sustaining life, but a great contribution to nature in the form of microorganisms. The complex carbon-hydrogen chain has served as classic raw material to chemical industries, which has perked up the hydrocarbon waste. Microbial remediation has been thus, focused to deal with the lacuna, where the new addition to this category is Microbacterium species.

OBJECTIVES

The identification and characterization of lipopeptide biosurfactant producing Microbacterium spp. isolated from brackish river water.

METHODS

The strain was isolated from an oil-contaminated lake. The strain was tested with all the other isolated species for oil degradation using screening protocols such as haemolysis, oil spread assay, BATH, E24, etc. The produced biosurfactant was extracted by acid precipitation, followed by solvent recovery. The strain with maximum potential was sequenced and was subjected to phylogeny assessment using in silico tools.

RESULTS

Novel Microbacterium species produce the extracellular biosurfactant. The surface tension of Microbacterium was found to be 32mN/m, indicates its powerful surface tension-reducing property. The strain was optimized for the production of biosurfactant and the best results were obtained with sucrose (2%) and yeast extract (3%) medium at 7 pH and 40°C temperature.

CONCLUSION

The isolate was confirmed to be a novel Microbacterium species that could produce 0.461 gm biosurfactant in 100 ml of the medium throughout a life cycle and novel strain of isolate was deposited to NCBI as Microbacterium spp. ANSKSLAB01 using an accession number: KU179507.

Potential Food Application of a Biosurfactant Produced by Saccharomyces cerevisiae URM 6670

Biosurfactants have aroused considerable interest due to the possibility of acquiring useful products that are tolerant to processing techniques used in industries. Some yeasts synthesize biosurfactants that offer antioxidant activity and thermal resistance and have no risk of toxicity or pathogenicity, demonstrating potential use in food formulations. The aim of the present study was to assess the use of a biosurfactant produced by Saccharomyces cerevisiae URM 6670 to replace egg yolk in a cookie formulation. The yeast was grown in a medium containing 1% waste soybean oil and 1% corn steep liquor. The biosurfactant was isolated using a novel method and was structurally characterized using FT-IR, NMR, and GC/FID. Thermal stability was determined using thermogravimetry (TG)/differential scanning calorimetry (DSC) and antioxidant activity was investigated using three methods. Cytotoxicity tests were performed using the MTT assay with mouse fibroblast and macrophage lines. In the final step, the biosurfactant was incorporated into the formulation of a cookie dough replacing egg yolk. The physical properties and texture profile were analyzed before and after baking. The surface and interfacial tensions of the culture medium after the production process were 26.64 ± 0.06 and 9.12 ± 0.04 mN/m, respectively, and the biosurfactant concentration was 5.84 ± 0.17 g/L after isolation. In the structural characterization by NMR and FT-IR, the biosurfactant from S. cerevisiae exhibited a glycolipid structure, with the fatty acid profile revealing a high percentage of linoleic acid (50.58%). The thermal analysis demonstrated stability at the industrial application temperature, with the negligible loss of mass at temperatures of up to 200°C. The biosurfactant was non-toxic to the fibroblast and macrophage cell lines, with cell inhibition less than 15%. The incorporation of the biosurfactant into the cookie dough did not alter the physical or physicochemical properties of the product after baking. In the analysis of the texture profile before baking, the substitution of egg yolk with the biosurfactant did not alter the properties of firmness, cohesiveness, or elasticity compared to the standard formulation. Therefore, the biosurfactant produced by S. cerevisiae URM 6670 has potential applications in the food industry as a replacement for egg yolk.

Microbial Surfactants: The Next Generation Multifunctional Biomolecules for Applications in the Petroleum Industry and Its Associated Environmental Remediation

Surfactants are a broad category of tensio-active biomolecules with multifunctional properties applications in diverse industrial sectors and processes. Surfactants are produced synthetically and biologically. The biologically derived surfactants (biosurfactants) are produced from microorganisms, with Pseudomonas aeruginosa, Bacillus subtilis Candida albicans, and Acinetobacter calcoaceticus as dominant species. Rhamnolipids, sophorolipids, mannosylerithritol lipids, surfactin, and emulsan are well known in terms of their biotechnological applications. Biosurfactants can compete with synthetic surfactants in terms of performance, with established advantages over synthetic ones, including eco-friendliness, biodegradability, low toxicity, and stability over a wide variability of environmental factors. However, at present, synthetic surfactants are a preferred option in different industrial applications because of their availability in commercial quantities, unlike biosurfactants. The usage of synthetic surfactants introduces new species of recalcitrant pollutants into the environment and leads to undesired results when a wrong selection of surfactants is made. Substituting synthetic surfactants with biosurfactants resolves these drawbacks, thus interest has been intensified in biosurfactant applications in a wide range of industries hitherto considered as experimental fields. This review, therefore, intends to offer an overview of diverse applications in which biosurfactants have been found to be useful, with emphases on petroleum biotechnology, environmental remediation, and the agriculture sector. The application of biosurfactants in these settings would lead to industrial growth and environmental sustainability.

Effect of biosurfactant derived from Vibrio natriegens MK3 against Vibrio harveyi biofilm and virulence

Vibrio harveyi is a marine luminous pathogen, which causes biofilm-mediated infections, pressures the search for an innovative alternate approach to strive against vibriosis in aquaculture. This study anticipated to explore the effect of glycolipid biosurfactant as an antipathogenic against V. harveyi to control vibriosis. In this study, 27 bacterial strains were isolated from marine soil sediments. Out of these, 11 strains exhibited surfactant activity and the strain MK3 showed high emulsification index. The potent strain was identified as Vibrio natriegens and named as V. natriegens MK3. The extracted biosurfactant was purified using high-performance liquid chromatography and it was efficient to decrease the surface tension of the growth medium up to 21 mN/m. The functional group and composition of the biosurfactant were determined by Fourier-transform infrared spectroscopy and nuclear magnetic resonance spectroscopy spectral studies and the nature of the biosurfactant was identified as glycolipid. The surfactant was capable of reducing the biofilm formation, bioluminescence, extracellular polysaccharide synthesis, and quorum sensing in marine shrimp pathogen V. harveyi. The antagonistic effect of biosurfactant was evaluated against V. harveyi-infected brine shrimp Artemia salina. This study reveals that biosurfactant can be considered for the management of biofilm-related aquatic infections.

The potential application of biosurfactant produced by Pseudomonas aeruginosa TGC01 using crude glycerol on the enzymatic hydrolysis of lignocellulosic material

The production of biosurfactant by Pseudomonas aeruginosa TGC01 using crude glycerol and sodium nitrate as the sole substrate and nitrogen source, respectively, was investigated using two mineral culture media. Two inoculum sizes (5 and 10% v/v) and two volumes of the culture medium (50 and 100 mL) in 500 mL Erlenmeyer flask also were used. Enzymatic hydrolyses of waste office paper (WOP), newspaper (NP) and eucalyptus wood chips (EWC) were carried out using the biosurfactant from P. aeruginosa TGC01. The decrease in volume of the culture medium increased the production of rhamnolipid by 500% in relation to concentration obtained when higher volume of culture medium was used. High quantity biosurfactant was recovered (11 g/L) with desired surface active properties after extraction using chloroform:methanol (v/v). The biosurfactant was able to reduce the water surface tension from 72 to 27 mN/m with a critical micelle concentration (CMC) of 100 mg/L and a stable emulsion index (above 60%) in the enzymatic hydrolysis (pH 4.8 and 50 °C for 4 h). Biosurfactant increased the glucose released in the enzymatic hydrolysis in relation to control (without tensoactive) when WOP (19% increase) and NP (113% increase) were used. The process for NP (18% lignin) was economical, given that the biosurfactant present made a delignification process unnecessary.

Bioprocess optimization and production of biosurfactant from an unexplored substrate: Parthenium hysterophorus

Biosurfactants are one among the best alternative for synthetic surfactants that are exploited by many researchers. Several agro wastes help to reduce the cost biosurfactants by being renewable and economical. The present research focuses on the biosurfactant production from Pseudomonas mosselii utilizing Parthenium hysterophorus as a relatively cheap substrate. P. hysterophorus being a hazardous weed, its eradication is quite tedious. So, the utilization of the weed for useful purposes serves as a choice to overcome the problems posed by the weed. In the study, this weed has been successfully utilized as a substrate and the optimized fermentative production of biosurfactant was done. From one-factor-at a-time analysis it was known that the substrate level of 3% incubation time of 96 h, pH 6.0, temperature 35 °C, glucose and yeast extract was found to be the best C and N sources for a high yield. The extracted biosurfactant was partially purified and characterized using FTIR. The biosurfactant produced from the weed could help to render the milestone for distinct biomedical and other applications.

Isolation and characterization of biosurfactant-producing and diesel oil degrading Pseudomonas sp. CQ2 from Changqing oil field, China

In the present research investigation, 13 indigenous bacteria (from CQ1 to CQ13) were isolated from soil collected from Changqing oil field of Xi'an, China. Four promising biosurfactant producers (CQ1, CQ2, CQ4, and CQ13) were selected through primary screening among these 13 strains, including via drop collapse and oil-spreading methods. However, only the strain CQ2 showed the best biosurfactant production and was further screened by hemolytic assay, cetyl trimethyl ammonium bromide (CTAB), surface tension and emulsifying activity. The bacterium CQ2 has the ability to produce about 3.015 g L-1 of biosurfactant using glucose as the sole carbon source without any optimization. The produced biosurfactant could greatly reduce surface tension from 72.66 to 24.72 mN m-1 with a critical micelle concentration (CMC) of 30 mg L-1 and emulsify diesel oil up to 60.1%. The cell-free broth was found to be stable in wide temperature (4-100 °C), pH (6-12) and salinity (2-20%) ranges for surface and emulsifying activity. This biosurfactant was preliminarily found to be of a glycolipid nature as evident from thin-layer chromatographic (TLC) and Fourier transform infra-red spectroscopic (FTIR) analyses. Moreover, CQ2 was able to degrade 54.7% of diesel oil, which surprisingly could form a substantial amount of bioflocculants during the degradation process. Furthermore, the 16S rDNA sequence using the Genbank BLAST tool revealed that isolated CQ2 was closely related to species of Pseudomonas genus and, thus, was entitled Pseudomonas sp. CQ2. The results of residual diesel oil contents measured by GC-MS showed that C7-C28 hydrocarbons could be degraded by Pseudomonas sp. CQ2. Thus, these findings revealed that CQ2 could be applied for remediation of diesel oil/petroleum-contaminated waters and soils on a large scale.

Anthelmintic efficacy of glycolipid biosurfactant produced by Pseudomonas plecoglossicida: an insight from mutant and transgenic forms of Caenorhabditis elegans

The current research focuses on the production and characterization of glycolipid biosurfactant (GB) from Pseudomonas plecoglossicida and its anthelmintic activity against Caenorhabditis elegans. The GB was purified and characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography and Mass Spectrometry (GC-MS) analysis. Anthelmintic activity of GB was studied at six different pharmacological doses from 10 to 320 µg/mL on C. elegans. Exposure of different developmental stages (L1, L2, L3, L4 and adult) of C. elegans to the GB reduced the survivability of worms in a dose and time-dependent manner. Adult and L4 worms were least susceptible, while L1, L2 and L3 were more susceptible to GB when compared to the untreated control. An increased exposure period drastically reduced the survival rate of worms and reduction in LC₅₀ value. The GB significantly inhibited the development of C. elegans with an IC₅₀ value of 53.14 µg/mL and even reduced the adult body length and egg hatching. Fecundity rate of the worms treated with GB at 20, 40 and 80 µg/mL decreased from 261.90 ± 3.21 to 239.70 ± 5.58, 164.20 ± 5.94 and 44.80 ± 6.22 eggs per worm, respectively. Besides the toxicological effects, prolonged exposure to GB significantly decreased (p ≤ 0.0001) the lifespan of wild type worms under standard laboratory conditions. Additionally, GB was found to be lethal towards ivermectin and albendazole resistant C. elegans strains. Overall, the data indicated that the GB extracted from P. plecoglossicida could be utilized for the control of non-susceptible and resistant gastrointestinal nematodes towards broad spectrum anthelmintic drugs, ivermectin and albendazole.

Toward high-efficiency production of biosurfactant rhamnolipids using sequential fed-batch fermentation based on a fill-and-draw strategy

Rhamnolipids are the most promising biosurfactants, have widespread applications in many fields. However, low yield and productivity in fermentation caused a high production cost and thus prohibited the bulk applications of rhamnolipids in industry. In this study, a sequential fed-batch fermentation process with fill-and-draw operation was developed to improve rhamnolipids production. By utilizing this strategy, the total produced rhamnolipids reached over 150g/L, had a 163% and 102% increase over the traditional batch and fed-batch processes, respectively. This remarkable high production efficiency was achieved by the well-maintained high productivity of 0.4g/Lh for a period of 17 d. Astonishingly, the conversion yield was high as 84%, while this value was only 53.2% and 42.7% in the traditional batch and fed-batch process, respectively. The high-efficiency rhamnolipids production in this sequential fed-batch fermentation could be largely explained by a high presence of cell coupled with the replenishment of nutrients and dilution of toxic byproducts via fill-and-draw operation. In all, this validated fermentation strategy offers a great prospect for high-efficiency production of rhamnolipids in industry.

The role of graphene oxide and graphene oxide-based nanomaterials in the removal of pharmaceuticals from aqueous media: a review

In this review paper, the ill effects of pharmaceuticals (PhAs) on the environment and their adsorption on graphene oxide (GO) and graphene oxide-based (GO-based) nanomaterials have been summarised and discussed. The adsorption of prominent PhAs discussed herein includes beta-blockers (atenolol and propranolol), antibiotics (tetracycline, ciprofloxacin and sulfamethoxazole), pharmaceutically active compounds (carbamazepine) and analgesics such as diclofenac. The adsorption of PhAs strictly depends upon the experimental conditions such as pH, adsorbent and adsorbate concentrations, temperature, ionic strength, etc. To understand the adsorption mechanism and feasibility of the adsorption process, the adsorption isotherms, thermodynamics and kinetic studies were also considered. Except for some cases, GO and its derivatives show excellent adsorption capacities for PhAs, which is crucial for their applications in the environmental pollution cleanup.

Response Surface Methodology for Optimizing the Production of Biosurfactant by Candida tropicalis on Industrial Waste Substrates

Biosurfactant production optimization by Candida tropicalis UCP0996 was studied combining central composite rotational design (CCRD) and response surface methodology (RSM). The factors selected for optimization of the culture conditions were sugarcane molasses, corn steep liquor, waste frying oil concentrations and inoculum size. The response variables were surface tension and biosurfactant yield. All factors studied were important within the ranges investigated. The two empirical forecast models developed through RSM were found to be adequate for describing biosurfactant production with regard to surface tension (R² = 0.99833) and biosurfactant yield (R² = 0.98927) and a very strong, negative, linear correlation was found between the two response variables studied (r = −0.95). The maximum reduction in surface tension and the highest biosurfactant yield were 29.98 mNm⁻¹ and 4.19 gL⁻¹, respectively, which were simultaneously obtained under the optimum conditions of 2.5% waste frying oil, 2.5%, corn steep liquor, 2.5% molasses, and 2% inoculum size. To validate the efficiency of the statistically optimized variables, biosurfactant production was also carried out in 2 and 50 L bioreactors, with yields of 5.87 and 7.36 gL⁻¹, respectively. Finally, the biosurfactant was applied in motor oil dispersion, reaching up to 75% dispersion. Results demonstrated that the CCRD was suitable for identifying the optimum production conditions and that the new biosurfactant is a promising dispersant for application in the oil industry.

Enhanced Soil Remediation via Plant-Based Surfactant Compounds from Acanthophyllum Laxiusculum

In the present study, an aqueous root-extract of Acanthophyllum laxiusculum (AREAL) was evaluated for phenanthrene removal from two samples of contaminated soil. AREAL showed a linear solubilization enhancement for phenanthrene with a weight solubilization ratio of 0.05. Batch soil washing experiments caused the removal of phenanthrene with efficiencies of 96.7 % and 78 % from soils with 0.78 % and 2.73 % organic carbon, respectively. Desorption kinetics of phenanthrene exhibited a two-phase pattern, namely, a rapid release as the initial phase and a slower removal as a subsequent phase. A two-compartment exponential model could adequately represent the two phases of the kinetic pattern of phenanthrene desorption. The rise of pH from acidic to basic levels, decreased phenanthrene removal due to changes in the micelle number of the surfactant phase. Maximum achievable yield of removal was 82 % phenanthrene in a column experiment at defined operational conditions. High removal efficiencies show the potential application of AREAL for improving the bioremediation of polycyclic aromatic hydrocarbons (PAHs) from contaminated soils.

Biosurfactant production by Pseudomonas aeruginosa DSVP20 isolated from petroleum hydrocarbon-contaminated soil and its physicochemical characterization

Among 348 microbial strains isolated from petroleum hydrocarbon-contaminated soil, five were selected for their ability to produce biosurfactant based on battery of screening assay including hemolytic activity, surface tension reduction, drop collapse assay, emulsification activity, and cell surface hydrophobicity studies. Of these, bacterial isolate DSVP20 was identified as Pseudomonas aeruginosa (NCBI GenBank accession no. GQ865644) based on biochemical characterization and the 16S rDNA analysis, and it was found to be a potential candidate for biosurfactant production. Maximum biosurfactant production recorded by P. aeruginosa DSVP20 was 6.7 g/l after 72 h at 150 rpm and at a temperature of 30 °C. Chromatographic analysis and high-performance liquid chromatography-mass spectrometry (HPLC-MS) revealed that it was a glycolipid in nature which was further confirmed by nuclear magnetic resonance (NMR) spectroscopy. Bioremediation studies using purified biosurfactant showed that P. aeruginosa DSVP20 has the ability to degrade eicosane (97%), pristane (75%), and fluoranthene (47%) when studied at different time intervals for a total of 7 days. The results of this study showed that the P. aeruginosa DSVP20 and/or biosurfactant produced by this isolate have the potential role in bioremediation of petroleum hydrocarbon-contaminated soil.