Modified bacterial cellulose scaffolds for localized doxorubicin release in human colorectal HT-29 cells

Trilayered nanocellulose-based patches loaded with acyclovir and hyaluronic acid for the treatment of herpetic lesions

This study focuses on the preparation of layered bacterial nanocellulose (BNC) patches for drug delivery and wound healing in the context of herpes labialis. Nanostructured patches were prepared by selective aqueous diffusion of acyclovir (ACV, antiviral drug), hyaluronic acid (HA, skin healing promoter), and glycerol (GLY, plasticizer and humectant) in the BNC network, followed by assembly into trilayered patches with ACV on the central layer of the patch (ACVT) or divided between two layers (ACVH), to modulate drug release. Both patches showed good layers' adhesion and thermal stability (125 °C), UV barrier properties, good static (Young's modulus up to 0.9 GPa (dry) and 0.7 GPa (wet)) and dynamic mechanical performance, and adhesion strength (21 kPa) comparable to or higher than other materials and commercial adhesives for wound healing. In vitro drug dissolution showed faster ACV release from the ACVH patch (77 ± 5 %, 10 min) than from the ACVT one (50 ± 7 %), suggesting efficient drug delivery. ACVH closely resembled a commercial cream formulation in terms of release and permeation profiles. The patches were non-cytotoxic toward L929 fibroblasts, promoting cell adhesion and wound closure (in vitro). These results underscore the dual-action potential of the layered patches for managing herpetic lesions.

Bacterial cellulose films for L-asparaginase delivery to melanoma cells

L-asparaginase (L-ASNase) is an enzyme that catalyzes the hydrolysis of L-asparagine to L-aspartic acid and ammonia and is used to treat acute lymphoblastic leukemia. It is also toxic to the cells of some solid tumors, including melanoma cells. Immobilization of this enzyme can improve its activity against melanoma tumor cells. In this work, the properties of bacterial cellulose (BC) and feasibility of BC films as a new carrier for immobilized L-ASNase were investigated. Different values of growth time were used to obtain BC films with different thicknesses and porosities, which determine the water content and the ability to adsorb and release L-ASNase. Fourier transform infrared spectroscopy confirmed the adsorption of the enzyme on the BC films. The total activity of adsorbed L-ASNase and its release were investigated for films grown for 48, 72 or 96 h. BC films grown for 96 h showed the most pronounced release as described by zero-order and Korsmayer-Peppas models. The release was characterized by controlled diffusion where the drug was released at a constant rate. BC films with immobilized L-ASNase could induce cytotoxicity in A875 human melanoma cells. With further development, immobilization of L-ASNase on BC may become a potent strategy for anticancer drug delivery to superficial tumors.

Protein Immobilization on Bacterial Cellulose for Biomedical Application

New carriers for protein immobilization are objects of interest in various fields of biomedicine. Immobilization is a technique used to stabilize and provide physical support for biological micro- and macromolecules and whole cells. Special efforts have been made to develop new materials for protein immobilization that are non-toxic to both the body and the environment, inexpensive, readily available, and easy to modify. Currently, biodegradable and non-toxic polymers, including cellulose, are widely used for protein immobilization. Bacterial cellulose (BC) is a natural polymer with excellent biocompatibility, purity, high porosity, high water uptake capacity, non-immunogenicity, and ease of production and modification. BC is composed of glucose units and does not contain lignin or hemicellulose, which is an advantage allowing the avoidance of the chemical purification step before use. Recently, BC-protein composites have been developed as wound dressings, tissue engineering scaffolds, three-dimensional (3D) cell culture systems, drug delivery systems, and enzyme immobilization matrices. Proteins or peptides are often added to polymeric scaffolds to improve their biocompatibility and biological, physical-chemical, and mechanical properties. To broaden BC applications, various ex situ and in situ modifications of native BC are used to improve its properties for a specific application. In vivo studies showed that several BC-protein composites exhibited excellent biocompatibility, demonstrated prolonged treatment time, and increased the survival of animals. Today, there are several patents and commercial BC-based composites for wounds and vascular grafts. Therefore, further research on BC-protein composites has great prospects. This review focuses on the major advances in protein immobilization on BC for biomedical applications.

Nanocellulose-based platforms as a multipurpose carrier for drug and bioactive compounds: From active packaging to transdermal and anticancer applications

The nanocellulose has unique characteristics, such as biocompatibility, good mechanical strength, and low cytotoxicity. The nanocellulose crystalline portion is responsible for good mechanical resistance, while the amorphous portion is responsible for flexibility. Such features make it a promising candidate for multiple applications related to the modulation of substance release: targeted cancer therapy, transdermal drug delivery, and controlled-release packaging materials. Thus, in this study, we discussed nanocellulose as a multipurpose material for drug delivery and bioactive compound carriers in controlled delivery systems with varied applications in pharmaceutic fields. Herein, we focus on understanding key factors such as i) polymer-drug interactions and surface modification strategies in controlled release rates, ii) therapeutic efficacy, and iii) biocompatibility aspects. The tunable chemistry surface plays a fundamental approach limiting the quick release of active substances in drug delivery systems. Several works on a pre-clinical stage of investigation were overviewed, reporting robust evidence on nanocellulose to design bioactive compounds/drug delivery carriers based on stimuli-responsive drug release and controlled delivery systems for higher efficiency in cancer therapies, purposing target therapy and reduced side effects. Nanocellulose was also identified as a solid candidate material in active packaging for pharmaceutical products. Cellulose nanocrystals and bacterial cellulose demonstrated strong potential to overcome the challenge of controlled release profile and open novel insights in advanced active packaging materials for pharmaceutics with controlled release of antioxidant and antimicrobial substances. Moreover, the concept overview in this work might be extended in active food packaging technologies to flavor-releasing/absorbing systems or antimicrobial/antioxidant carriers for extending the shelf life of foods.

Bacterial Cellulose-Based Materials as Dressings for Wound Healing

Bacterial cellulose (BC) is produced by several microorganisms as extracellular structures and can be modified by various physicochemical and biological strategies to produce different cellulosic formats. The main advantages of BC for biomedical applications can be summarized thus: easy moldability, purification, and scalability; high biocompatibility; and straightforward tailoring. The presence of a high amount of free hydroxyl residues, linked with water and nanoporous morphology, makes BC polymer an ideal candidate for wound healing. In this frame, acute and chronic wounds, associated with prevalent pathologies, were addressed to find adequate therapeutic strategies. Hence, the main characteristics of different BC structures-such as membranes and films, fibrous and spheroidal, nanocrystals and nanofibers, and different BC blends, as well as recent advances in BC composites with alginate, collagen, chitosan, silk sericin, and some miscellaneous blends-are reported in detail. Moreover, the development of novel antimicrobial BC and drug delivery systems are discussed.

Anticancer properties of bacterial cellulose membrane containing ethanolic extract of Epilobium angustifolium L

Epilobium angustifolium L. is a medicinal plant well known for its anti-inflammatory, antibacterial, antioxidant, and anticancer properties related to its high polyphenols content. In the present study, we evaluated the antiproliferative properties of ethanolic extract of E. angustifolium (EAE) against normal human fibroblasts (HDF) and selected cancer cell lines, including melanoma (A375), breast (MCF7), colon (HT-29), lung (A549) and liver (HepG2). Next, bacterial cellulose (BC) membranes were applied as a matrix for the controlled delivery of the plant extract (BC-EAE) and characterized by thermogravimetry (TG), infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) images. In addition, EAE loading and kinetic release were defined. Finally, the anticancer activity of BC-EAE was evaluated against the HT-29 cell line, which presented the highest sensitivity to the tested plant extract (IC₅₀ = 61.73 ± 6.42 µM). Our study confirmed the biocompatibility of empty BC and the dose and time-dependent cytotoxicity of the released EAE. The plant extract released from BC-2.5%EAE significantly reduced cell viability to 18.16% and 6.15% of the control values and increased number apoptotic/dead cells up to 37.53% and 66.90% after 48 and 72 h of treatment, respectively. In conclusion, our study has shown that BC membranes could be used as a carrier for the delivery of higher doses of anticancer compounds released in a sustained manner in the target tissue.

Development of Genistein Drug Delivery Systems Based on Bacterial Nanocellulose for Potential Colorectal Cancer Chemoprevention: Effect of Nanocellulose Surface Modification on Genistein Adsorption

Genistein is an isoflavone with antioxidant, anti-inflammatory, and anticancer properties. That said, its use in the industry is limited by its low solubility in aqueous systems. In this work, bacterial nanocellulose (BNC) and BNC modified with cetyltrimethylammonium (BNC-CTAB) were evaluated as genistein-encapsulating materials for their controlled release in cancer chemoprevention. Thin films were obtained and characterized by contact angle, AFM, TEM, UV–Vis spectroscopy FTIR, and TGA techniques to verify surface modification and genistein encapsulation. The results show a decrease in hydrophilization degree and an increase in diameter after BNC modification. Furthermore, the affinity of genistein with the encapsulating materials was determined in the context of monolayer and multilayer isotherms, thermodynamic parameters and adsorption kinetics. Spontaneous, endothermic and reversible adsorption processes were found for BNC-GEN and BNC-CTAB-GEN. After two hours, the maximum adsorption capacity corresponded to 4.59 mg GEN∙g⁻¹ BNC and 6.10 mg GEN∙g⁻¹ BNC-CTAB; the latter was a more stable system. Additionally, in vitro release assays performed with simulated gastrointestinal fluids indicated controlled and continuous desorption in gastric and colon fluids, with a release of around 5% and 85%, respectively, for either system. Finally, the IC50 tests made it possible to determine the amounts of films required to achieve therapeutic concentrations for SW480 and SW620 cell lines.

Improved water dispersion and bioavailability of coenzyme Q10 by bacterial cellulose nanofibers

The purpose of this study was to investigate the potential of bacterial cellulose nanofiber suspension (BCNs) as stabilizer in anti-solvent precipitation and its effect on improving bioavailability of coenzyme Q10. Bacterial cellulose (BC) was hydrolyzed by sulfuric acid followed by the oxidation with hydrogen peroxide to prepare BCNs. The suspension of BCNs-loaded CoQ10 (CoQ10-BCNs) were prepared by antisolvent precipitation. The zeta potential of CoQ10-BCNs was about -36.01 mV. The properties of CoQ10, BCNs and CoQ10-BCNs were studied by scanning electron microscopy, transmission electron microscope, Fourier-transform infrared spectroscopy, X-ray diffraction, differential scanning calorimetry and thermo gravimetric analysis. The crystallinity of CoQ10 decreased in CoQ10-BCNs compared with the raw CoQ10, and CoQ10-BCNs have good physicochemical stability. In oral bioavailability studies, the area under curve (AUC) of CoQ10-BCNs was about 3.62 times higher than the raw CoQ10 in rats.

Microbial production and recovery of hybrid biopolymers from wastes for industrial applications- a review

Agro-industrial wastes to be a global concern since agriculture and industrial processes are growing exponentially with the fast increase of the world population. Biopolymers are complex molecules produced by living organisms, but also found in many wastes or derived from wastes. The main drawbacks for the use of polymers are the high costs of the polymer purification processes from waste and the scale-up in the case of biopolymer production by microorganisms. However, the use of biopolymers at industrial scale for the development of products with high added value, such as food or biomedical products, not only can compensate the primary costs of biopolymer production, but also improve local economies and environmental sustainability. The present review describes some of the most relevant aspects related to the synthesis of hybrid materials and nanocomposites based on biopolymers for the development of products with high-added value.

Bacterial Cellulose: Functional Modification and Wound Healing Applications

Significance: Wound dressings are frequently used for wound covering and healing. Ideal wound dressings should provide a moist environment for wounds and actively promote wound healing and skin recovery. The materials used as ideal wound dressings should possess specific properties, thus accelerating skin tissue regeneration process. Recent Advances: Bacterial cellulose (BC) is a natural polymer synthesized by some bacteria. As a kind of natural biopolymer, BC shows good biological activity, biodegradability, and biological adaptability. It has many unique physical, chemical, and biological properties, such as ultrafine nanofiber network, high crystallinity, high water absorption and retention capacity, and high tensile strength and elastic modulus. These excellent properties of BC have laid the foundation for its application as dressing in wound healing. Critical Issues: To optimize the biocompatibility and antimicrobial activity of BC, different methods including microbial fermentation, physical modification, chemical modification, and compound modification have been adopted to modify BC to ensure a better application in wound healing. BC-based wound dressings have been applied in infected wounds, acute traumatic injuries, burns, and diabetic wounds, showing remarkable therapeutic effects on promoting wound healing. Furthermore, there have been some commercial BC-based dressings and they have been utilized in clinical practice. Future Directions: Because of its excellent physicochemical characteristics and biological properties, BC shows high clinical value to be used as a wound dressing for skin tissue regeneration.

Development of dual crosslinked mumio-based hydrogel dressing for wound healing application: Physico-chemistry and antimicrobial activity

In this study, an antimicrobial mumio-based hydrogel dressing was developed for wound healing application. The mechanism of gel formation was achieved via a double crosslink network formation between gelatin (GT) and polyvinyl alcohol (PVA) using polyethylene glycol diglycidyl ether (PEGDE) and borax as crosslinking agents. To enhance the mechanical integrity of the hydrogel matrix, bacterial cellulose (BC) was integrated into the GT-PVA hydrogel to produce a composite gel dressing. The obtained hydrogel was characterized by FTIR, SEM, TGA, and XRD. Gel fraction, in vitro swelling and degradation as well as compressive modulus properties of the gel dressing were investigated as a function of change in PVA and BC ratios. By increasing the ratios of PVA and BC, the composite dressing showed lower swelling but higher mechanical strength. Comparing to other formulations, the gel with 4 %w/v PVA and 1 %w/v BC demonstrated to be most suitable in terms of stability and mechanical properties. In vitro cell cytotoxicity by MTT assay on human alveolar basal epithelial (A549) cell lines validated the gels as non-toxic. In addition, the mumio-based gel was compared to other formulations containing different bioactive agents of beeswax and cinnamon oil, which were tested for microbial growth inhibition effects against different bacteria (S. aureus and K. pneumoniae) and fungi (C. albicans and A. niger) strains. Results suggested that the gel dressing containing combinations of mumio, beeswax and cinnamon oil possess promising future in the inhibition of microbial infection supporting its application as a suitable dressing for wound healing.

Influence of Drying Method and Argon Plasma Modification of Bacterial Nanocellulose on Keratinocyte Adhesion and Growth

Due to its nanostructure, bacterial nanocellulose (BC) has several advantages over plant cellulose, but it exhibits weak cell adhesion. To overcome this drawback, we studied the drying method of BC and subsequent argon plasma modification (PM). BC hydrogels were prepared using the Komagataeibacter sucrofermentans (ATCC 700178) bacteria strain. The hydrogels were transformed into solid samples via air-drying (BC-AD) or lyophilization (BC-L). The sample surfaces were then modified by argon plasma. SEM revealed that compared to BC-AD, the BC-L samples maintained their nanostructure and had higher porosity. After PM, the contact angle decreased while the porosity increased. XPS showed that the O/C ratio was higher after PM. The cell culture experiments revealed that the initial adhesion of human keratinocytes (HaCaT) was supported better on BC-L, while the subsequent growth of these cells and final cell population density were higher on BC-AD. The PM improved the final colonization of both BC-L and BC-AD with HaCaT, leading to formation of continuous cell layers. Our work indicates that the surface modification of BC renders this material highly promising for skin tissue engineering and wound healing.

In Vitro Efficacy of Bacterial Cellulose Dressings Chemisorbed with Antiseptics against Biofilm Formed by Pathogens Isolated from Chronic Wounds

Local administration of antiseptics is required to prevent and fight against biofilm-based infections of chronic wounds. One of the methods used for delivering antiseptics to infected wounds is the application of dressings chemisorbed with antimicrobials. Dressings made of bacterial cellulose (BC) display several features, making them suitable for such a purpose. This work aimed to compare the activity of commonly used antiseptic molecules: octenidine, polyhexanide, povidone-iodine, chlorhexidine, ethacridine lactate, and hypochlorous solutions and to evaluate their usefulness as active substances of BC dressings against 48 bacterial strains (8 species) and 6 yeast strains (1 species). A silver dressing was applied as a control material of proven antimicrobial activity. The methodology applied included the assessment of minimal inhibitory concentrations (MIC) and minimal biofilm eradication concentration (MBEC), the modified disc-diffusion method, and the modified antibiofilm dressing activity measurement (A.D.A.M.) method. While in 96-well plate-based methods (MIC and MBEC assessment), the highest antimicrobial activity was recorded for chlorhexidine, in the modified disc-diffusion method and in the modified A.D.A.M test, povidone-iodine performed the best. In an in vitro setting simulating chronic wound conditions, BC dressings chemisorbed with polyhexanide, octenidine, or povidone-iodine displayed a similar or even higher antibiofilm activity than the control dressing containing silver molecules. If translated into clinical conditions, the obtained results suggest high applicability of BC dressings chemisorbed with antiseptics to eradicate biofilm from chronic wounds.

A comprehensive review on alginate-based delivery systems for the delivery of chemotherapeutic agent: Doxorubicin

Doxorubicin (DOX), an anthracycline drug, is widely used for the treatment of several cancers like osteosarcoma, cervical carcinoma, breast cancer, etc. DOX lacks target specificity; thereby it also affects normal cells thus resulting in several side-effects. A drug delivery system (DDS) can be used to deliver the drug in a controlled and sustained manner at a targeted site within the body. Various DDS like nanoemulsions, polymeric nanoparticles, and liposomes are used for loading DOX. Alginate, a polysaccharide is widely used for fabricating DDS due to its biodegradable and bio-compatible properties. Alginates, in combination with other biomaterials, have been extensively used as a novel drug delivery carrier for DOX. Alginate provides a platform for drug delivery in different forms like hydrogels, nanogels, nanoparticles, microparticles, graphene oxide systems, magnetic systems, etc. Herein, we briefly describe alginate in combination with other materials as a nanocarrier for targeted delivery of DOX for anti-cancer treatment.

Multiple local therapeutics based on nano-hydrogel composites in breast cancer treatment

The locoregional recurrence of breast cancer after tumor resection represents several clinical challenges, and conventional post-surgical adjuvant therapeutics always bring about significant systemic side effects. Thus, the local therapy strategy has received considerable interest in breast cancer treatment, and hydrogels can function as ideal platforms due to their remarkable properties such as good biocompatibility, biodegradability, flexibility, and multifunctionality. The nano-hydrogel composites can further incorporate the advantages of nanomaterials into the hydrogel system, to fabricate hierarchical structures for stimulating controlled multi-stage release of different therapeutic agents and improving the synergistic effects of combination therapy. In this review, the problems of clinical treatments of breast cancer and properties of hydrogels in current biomedical applications are briefly overviewed. The focus is on recent advances in local therapy based on nano-hydrogel composites for both monotherapy (chemotherapy, photothermal and photodynamic therapy) and combination therapy (dual chemotherapy, photothermal chemotherapy, photothermal immunotherapy, radio-chemotherapy). Moreover, the challenges and perspectives in the development of advanced nano-hydrogel systems are also discussed.

Preparation of pH-sensitive chitosan/polyvinylpyrrolidone/α-Fe2O3 nanocomposite for drug delivery application: Emphasis on ameliorating restrictions

Chitosan (CS)/polyvinylpyrrolidone (PVP)/hematite (α-Fe₂O₃) nanocomposites loaded with Doxorubicin (drug model) were synthesized via an oil-in-water emulsification method to develop a biocompatible and pH-sensitive drug nanocarrier for the first time. A hydrogel, including CS, PVP, and α-Fe₂O₃, was fabricated successfully with glutaraldehyde (GA) as the cross-linker. Incorporating α-Fe₂O₃ into CS/PVP hydrogel improved the pH-sensitivity and developed beneficial hydrogel. FTIR and XRD analysis illustrated physical interactions between polymer-polymer, polymer-drug, and crystalline behavior of prepared nanocomposite. These analyses also confirmed chemical bonding in nanocomposite's structure. The FE-SEM analysis showed successful impregnation of α-Fe₂O₃ into CS/PVP matrix and spherical structure. To clarify the size distribution and surface charge of the drug-loaded nanocomposite (CS/PVP/α-Fe₂O₃/Dox), DLS and zeta analyses were conducted. They showed the mean size of nanocomposites at about 247 nm. Drug-loaded CS/PVP/α-Fe₂O₃ nanocomposite and CS/PVP/Dox were studied for their release behavior and kinetics. Furthermore, the effect of α-Fe₂O₃ on release from CS/PVP/α-Fe₂O₃/Dox nanocomposite was investigated. That showed an increase in encapsulation of Doxorubicin and beneficial release behavior such as slow-release and retention effect. The release from this drug-loaded nanocomposite revealed excellent pH-sensitive and controlled release of the drug. Besides, the in vitro cytotoxicity and cell apoptosis were studied to recognize biological properties. These analyses revealed that drug-loaded nanocomposite caused high inhibition to MCF-7 cells in presence of α-Fe₂O₃ and proved the hematite's anti-cancer effect. By and large, this study confirmed CS/PVP/α-Fe₂O₃ nanocomposites as a potential candidate for the controlled pH-sensitive release of the drug.

An in-situ fabrication of bamboo bacterial cellulose/sodium alginate nanocomposite hydrogels as carrier materials for controlled protein drug delivery

Sodium alginate-bacterial cellulose (SA-BC) is a nanocomposite hydrogel with multi-layered porous surfaces fabricated using an in-situ biosynthesis modification method. The enzymatic hydrolysate (EH) of glycerol-pretreated Moso bamboo (MBEH) was the carbon source for glucose substitution to generate SA-bamboo-BC. SA, a natural biological polysaccharide, was combined with BC at dosages of 0.25%, 0.5%, 0.75% and 1% through hydrogen bonding. Compared to the native BC, the addition of 0.75% SA, termed as SA-bamboo-BC-0.75, enhanced the thermal properties. The dynamic swelling/de-swelling were pH-dependent, with an increased swelling ratio (SR) of 613% observed at pH 7.4 but a lower SR of 366% observed at pH 1.2. These differences were attributable to the electrostatic repulsion of -COO^-. Two protein-based model drugs were compared to estimate their drug-release properties. Bovine serum albumin (BSA) was adsorbed on lignin from MBEH through hydrophobic interactions, resulting in poor drug release. Lysozyme (LYZ) exhibited a higher drug release rate (92.79%) over 60 h at pH 7.4 due to the static attraction between LYZ and -COO^- of SA-bamboo-BC-0.75. As such, SA-bamboo-BC nanocomposite hydrogel was shown to possess sufficient swelling, drug-release and biocompatibility for substrate use.

Biotech nanocellulose: A review on progress in product design and today's state of technical and medical applications

Biotech nanocellulose (bacterial nanocellulose, BNC) is a high potential natural polymer. Moreover, it is the only cellulose type that can be produced biotechnologically using microorganisms resulting in hydrogels with high purity, high mechanical strength and an interconnecting micropore system. Recently, the subject of intensive research is to influence this biosynthesis to create function-determining properties. This review reports on the progress in product design and today's state of technical and medical applications. A novel, dynamic, template-based technology, called Mobile Matrix Reservoir Technology (MMR Tech), is highlighted. Thereby, shape, dimensions, surface properties, and nanonetwork structures can be designed in a process-controlled manner. The formed multilayer materials open up new applications in medicine and technology. Especially medical materials for cardiovascular and visceral surgery, and drug delivery systems are developed. The effective production of layer-structured composites and coatings are important for potential applications in the electronics, paper, food and packaging technologies.

Ex-situ modification of bacterial cellulose for immediate and sustained drug release with insights into release mechanism

The release of drug from bacterial cellulose (BC) is tuned to achieve immediate and controlled delivery by using two drying strategies: freeze-drying and oven-drying. Diclofenac sodium (DCF), a hydrophilic drug, was used as the model drug and was loaded in oven-dried BC (BC-OD-DCF) and freeze-dried BC (BC-FD-DCF) to obtain sustained release and burst release, respectively. BC dried by the two methods were characterized and found to possess different structures and morphologies. The crystallinity was found to be higher for BC-OD (86 % for BC-OD and 79 % for BC-FD) while BC-FD offered higher porosity (92 % for BC-FD and 75 % for BC-OD), higher specific surface area (85 m²/g for BC-FD and 35 m²/g for BC-OD) and pore size, which altogether affects the matrix swellability, drug loading and release behaviour. The mathematical modelling of drug release kinetics supports diffusion-driven first-order release from BC-FD-DCF whereas release from BC-OD-DCF shows a super case II transport, where the buffer front travels slowly into the denser oven-dried matrix leading to a controlled release of the drug. The correlation between swelling and cumulative drug release is also discussed.

Efficacy of scaffold-mediated localized chemotherapy in cancer: A systematic review of current research

OBJECTIVE

To assess the efficacy of scaffold-mediated localized chemotherapy in cancer.

METHODS

Databases including PubMed, Cochrane Library, and SCOPUS were searched for articles reporting the use of scaffold-mediated localized drug delivery in cancer. Essential data including scaffold fabrication material and methods, drug dosage and release duration and its effect on the cancer cells were extracted.

RESULTS

15 articles out of 60 screened, fulfilled the eligibility criteria. Among the 15 studies, 5 studies included only cell lines and 2 studies were on mouse models, while 8 studies involved a combination of cell lines and mouse models. Scaffold materials included both synthetic polymers such as poly-lactide, polycaprolactone and natural materials including d-periosteum and human micro-fragmented adipose tissueA wide number of other variables included the fabrication procedure, drugs used, and the methods used to assess the effects on cancer. As a result, it was not possible to make any direct comparison of the efficacy of the therapeutic strategy used in each of these studies.

CONCLUSION

Irrespective of the many variables, a common consensus in all the included studies was that scaffold mediated localized drug delivery effectively reduced cancer cell viability by increasing drug bioavailability to the target tissue, while its localized effect reduced the risk of systemic toxicity.

Process control and scale-up of modified bacterial cellulose production for tailor-made anti-inflammatory drug delivery systems

Bacterial cellulose (BC) has proven its high potential as active wound dressing and drug delivery system in many scientific studies, but the transferability of the methods to efficient manufacturing still needs to be demonstrated. This study presents a technically feasible, straightforward and efficient approach to modify BC according to specific medical requirements, to scale-up the cultivation and to load the active pharmaceutical ingredient of interest. By means of in situ-modification of the network structure using water-soluble poly(ethylene glycol) 400 and 4000 on pilot-scale, up to 41.5 ± 3.0 % higher transparency of the dressing, 40.6 ± 3.8 % increased loading capacity and 9% increased total release of the anti-inflammatory model drug diclofenac sodium could be obtained. Spray loading was investigated as material efficient alternative to absorption loading allowing a significant reduction in loading time.

Bacterial Cellulose-Alginate Composite Beads as Yarrowia lipolytica Cell Carriers for Lactone Production

The demand for natural lactone gamma-decalactone (GDL) has increased in the fields of food and cosmetic products. However, low productivity during bioprocessing limits its industrial production. In this study, a novel composite porous cell carrier, bacterial cellulose-alginate (BC-ALG), was used for long-term biotransformation and production of GDL. The effects of this carrier on biotransformation and related mechanisms were investigated. BC-ALG carriers showed improved mechanical strength over ALG carriers, with their internal embedded cell pattern changed to an interconnected porous structure. In five repeated-batch biotransformation experiments, the maximum concentration of GDL obtained in culture with BC-ALG carriers was 8.37 g/L, approximately 3.7 times higher than that from the medium with an ALG carrier alone. The result indicated that multiple hydrogen bonding interactions at the interface between BC and ALG contributed to the compatibility and stability of BC-ALG carriers. On the basis of the above results, the BC-ALG composite carrier can be considered ideal for immobilisation of cells for the production of GDL on an industrial scale, and has the potential to be utilised in other biological processes.

Chitosan-bacterial cellulose patch of ciprofloxacin for wound dressing: Preparation and characterization studies

Biopolymeric blends based on bacterial cellulose (BC) films modified with low molecular weight chitosan (Chi) were developed for controlled release of ciprofloxacin (Cip). Biophysical studies revealed a compatible and cooperative network between BC and Chi including deep structural changes in the BC matrix shown by spectroscopic and thermal analyses (SEM, roughness analysis, FTIR, XRD, TGA, mechanical properties and water vapor transmission rate). Incorporation of chitosan to BC matrix generated a thickening scaffold with high permeability to water vapor from 0.7 to 3.2 g mm/m² h. Cip loaded onto the BC-Chi film showed a hyperbolic release profile with a 30% decrease in antibiotic release mediated by the presence of Chi. BC-Chi blend films containing Cip tested against Pseudomonas aeruginosa and Staphylococcus aureus showed a synergic effect of chitosan on Cip antimicrobial activity. Besides, in vitro studies revealed the lack of cytotoxicity of BC-Chi-Cip films in human fibroblasts.

Latest Advances on Bacterial Cellulose-Based Materials for Wound Healing, Delivery Systems, and Tissue Engineering

Bacterial cellulose (BC) is a nanocellulose form produced by some nonpathogenic bacteria. BC presents unique physical, chemical, and biological properties that make it a very versatile material and has found application in several fields, namely in food industry, cosmetics, and biomedicine. This review overviews the latest state-of-the-art usage of BC on three important areas of the biomedical field, namely delivery systems, wound dressing and healing materials, and tissue engineering for regenerative medicine. BC will be reviewed as a promising biopolymer for the design and development of innovative materials for the mentioned applications. Overall, BC is shown to be an effective and versatile carrier for delivery systems, a safe and multicustomizable patch or graft for wound dressing and healing applications, and a material that can be further tuned to better adjust for each tissue engineering application, by using different methods.

Melatonin loaded with bacterial cellulose nanofiber by Pickering-emulsion solvent evaporation for enhanced dissolution and bioavailability

The objective of the present work aimed to explore the potential of bacterial cellulose (BC) for oral delivery of melatonin (MLT), a natural hormone that faces problems of low solubility and oral bioavailability. BC was hydrolyzed by sulfuric acid followed by the oxidation to prepare bacterial cellulose nanofiber suspension (BCNs). Melatonin-loaded bacterial cellulose nanofiber suspension (MLT-BCNs) was prepared by emulsion solvent evaporation method. The properties of freeze-dried BCs and MLT-BCNs were studied by Fluorescence microscopy (FM), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermo gravimetric (TG). The results indicated that the fibers in BCNs became short and thin compared with BC, MLT in MLT-BCNs was uniformly distributed, both BCNs and MLT-BCNs have good thermodynamic stability. The MLT-BCNs showed more rapid dissolution MLT rates compared to the commercially available MLT in SGF and SIF, the dissolution of the cumulative release rate was about 2.1 times of the commercially available MLT. The oral bioavailability of MLT-BCNs in rat was about 2.4 times higher than the commercially available MLT. Thus, MLT-BCNs could act as promising delivery with enhanced dissolution and bioavailability for MLT after oral administration.

A new glioblastoma cell trap for implantation after surgical resection

Glioblastoma (GB) is a highly infiltrative tumor, recurring, in 90% of cases, within a few centimeters of the surgical resection cavity, even with adjuvant chemo/radiotherapy. Residual GB cells left in the margins or infiltrating the brain parenchyma shelter behind the extremely fragile and sensitive brain tissue and may favor recurrence. Tools for eliminating these cells without damaging the brain microenvironment are urgently required. We propose a strategy involving the implantation, into the tumor bed after resection, of a scaffold to concentrate and trap these cells, to facilitate their destruction by targeted therapies, such as stereotactic radiosurgery. We used bacterial cellulose (BC), an easily synthesized and modifiable random nanofibrous biomaterial, to make the trap. We showed that the structure of BC membranes was ideal for trapping tumor cells and that BC implants were biocompatible with brain parenchyma. We also demonstrated the visibility of BC on magnetic resonance imaging, making it possible to follow its fate in clinical situations and to define the target volume for stereotactic radiosurgery more precisely. Furthermore, BC membranes can be loaded with chemoattractants, which were released and attracted tumor cells in vitro. This is of particular interest for trapping GB cells infiltrating tissues within a few centimeters of the resection cavity. Our data suggest that BC membranes could be a scaffold of choice for implantation after surgical resection to trap residual GB cells. STATEMENT OF SIGNIFICANCE: Glioblastoma is a highly infiltrative tumor, recurring, in 90% of cases, within a few centimeters of the surgical resection cavity, even with adjuvant chemo/radiotherapy. Residual tumor cells left in the margins or infiltrating the brain parenchyma shelter behind the extremely fragile and sensitive brain tissue and contribute to the risk of recurrence. Finding tools to eliminate these cells without damaging the brain microenvironment is a real challenge. We propose a strategy involving the implantation, into the walls of the surgical resection cavity, of a scaffold to concentrate and trap the residual tumor cells, to facilitate their destruction by targeted therapies, such as stereotactic radiosurgery.

Bacterial cellulose hydrogel loaded with lipid nanoparticles for localized cancer treatment

The use of hybrid materials, where a matrix sustains nanoparticles controlling the release of the chemotherapeutic drug, could be beneficial for the treatment of primary tumors prior or after surgery. This localized chemotherapy would guarantee high drug concentrations at the tumor site while precluding systemic drug exposure minimizing undesirable side effects. We combined bacterial cellulose hydrogel (BC) and nanostructured lipid carriers (NLCs) including doxorubicin (Dox) as a drug model. NLCs loaded with cationic Dox (NLCs-H) or neutral Dox (NLCs-N) were fully characterized and their cell internalization and cytotoxic efficacy were evaluated in vitro against MDA-MB-231 cells. Thereafter, a fixed combination of NLCs-H and NLCs-N loaded into BC (BC-NLCs-NH) was assayed in vivo into an orthotopic breast cancer mouse model. NLCs-H showed low encapsulation efficiency (48%) and fast release of the drug while NLCs-N showed higher encapsulation (97%) and sustained drug release. Both NLCs internalized via endocytic pathway, while allowing a sustained release of the Dox, which in turn rendered IC50 values below of those of free Dox. Taking advantage of the differential drug release, a mixture of NLCs-N and NLCs-H was encapsulated into BC matrix (BC-NLCs-NH) and assayed in vivo, showing a significant reduction of tumor growth, metastasis incidence and local drug toxicities.

Bacterial nanocellulose: the future of controlled drug delivery?

Although bacterial nanocellulose (BNC), a natural nanostructured biopolymer network, offers unique material characteristics, the number of drug-loaded BNC-based carriers in clinical trials or on the market is still low. This report provides an overview of aspects still limiting the broad application of BNC as drug-delivery system and the challenges for its future applications. Continuous large-scale production, storability, the loading and controlled release of critical drugs, for example, with high molar mass or highly lipophilic character as well as the formulation of long-term release systems will be highlighted. Recent achievements toward promoting the application of BNC as drug-delivery system and overcoming these obstacles will be discussed. [Formula: see text].

Hybrid bacterial cellulose–pectin films for delivery of bioactive molecules

Novel biopolymeric films based on bacterial cellulose (BC) modified with high methoxylated pectin (HMP) were developed for drug delivery.

Bacterial cellulose in biomedical applications: A review

Bacterial cellulose (BC) derived materials represents major advances to the current regenerative and diagnostic medicine. BC is a highly pure, biocompatible and versatile material that can be utilized in several applications - individually or in the combination with different components (e.g. biopolymers and nanoparticles) - to provide structural organization and flexible matrixes to distinct finalities. The wide application and importance of BC is described by its common utilization as skin repair treatments in cases of burns, wounds and ulcers. BC membranes accelerate the process of epithelialization and avoid infections. Furthermore, BC biocomposites exhibit the potential to regulate cell adhesion, an important characteristic to scaffolds and grafts; ultra-thin films of BC might be also utilized in the development of diagnostic sensors for its capability in immobilizing several antigens. Therefore, the growing interest in BC derived materials establishes it as a great promise to enhance the quality and functionalities of the current generation of biomedical materials.

Hydrogel Layers on the Surface of Polyester-Based Materials for Improvement of Their Biointeractions and Controlled Release of Proteins

The modification of bioresorbable polyester surfaces in order to alter their biointeractions presents an important problem in biomedical polymer science. In this study, the covalent modification of the surface of poly(lactic acid)-based (PLA-based) films with poly(acryl amide) and sodium alginate hydrogels was performed to change the non-specific polyester interaction with proteins and cells, as well as to make possible the covalent attachment of low-molecular weight ligands and to control protein release. The effect of such modification on the film surface properties was studied. Parameters such as swelling, water contact angle, surface area, and binding capacity of low-molecular weight substances were evaluated and compared. The comparative study of adsorption of model protein (BSA) on the surface of non-modified and modified films was investigated and the protein release was evaluated. Cell viability on the surface of hydrogel-coated films was also tested. The developed approach could be applied for the modification of PLA-based scaffolds for tissue engineering and will be further studied for molecular-imprinting of biomolecules on the surface of polyester-based materials for control of biointeractions.

Alginate/bacterial cellulose nanocomposite beads prepared using Gluconacetobacter xylinus and their application in lipase immobilization

Alginate/bacterial cellulose nanocomposite beads, with well-controlled size and regular spherical shapes, were prepared in a simple manner by entrapping Gluconacetobacter xylinus in barium alginate hydrogel beads, followed by cultivation of the entrapped cells in culture media with a low sodium ion concentration. The entire surface of the alginate hydrogel beads containing the cells was covered with cellulose fibers (∼30nm) after 36h of cultivation. The cellulose crystallinity index of the alginate/bacterial cellulose beads was 0.7, which was slightly lower than that of bacterial cellulose prepared by cultivating dispersed cells. The water vapor sorption capacity of the alginate/bacterial cellulose beads increased significantly from 0.07 to 38.00 (g/g dry bead) as cultivation time increased. These results clearly indicate that alginate/bacterial cellulose beads have a much higher surface area, crystallinity, and water-holding capacity than alginate beads. The immobilization of lipase on the surface of the nanocomposite beads was also investigated as a potential application of this system. The activity and specific activity of lipase immobilized on alginate/bacterial cellulose beads were 2.6- and 3.8-fold higher, respectively, than that of lipase immobilized on cellulose beads. The alginate/bacterial cellulose nanocomposite beads prepared in this study have several potential applications in the biocatalytic, biomedical, and pharmaceutical fields because of their biocompatibility, biodegradability, high crystallinity, and large surface area.

Progress in bacterial cellulose matrices for biotechnological applications

Bacterial cellulose (BC) is an extracellular polymer produced by many microorganisms. The Komagataeibacter genus is the best producer using semi-synthetic media and agricultural wastes. The main advantages of BC are the nanoporous structure, high water content and free hydroxyl groups. Modification of BC can be made by two strategies: in-situ, during the BC production, and ex-situ after BC purification. In bioprocesses, multilayer BC nanocomposites can contain biocatalysts designed to be suitable for outside to inside cell activities. These nanocomposites biocatalysts can (i) increase productivity in bioreactors and bioprocessing, (ii) provide cell activities does not possess without DNA cloning and (iii) provide novel nano-carriers for cell inside activity and bioprocessing. In nanomedicine, BC matrices containing therapeutic molecules can be used for pathologies like skin burns, and implantable therapeutic devices. In nanoelectronics, semiconductors BC-based using salts and synthetic polymers brings novel films showing excellent optical and photochemical properties.