Recyclable laccase by coprecipitation with aciduric Cu-based MOFs for bisphenol A degradation in an aqueous environment

Immobilization of laccase on magnetic PEGDA-CS inverse opal hydrogel for enhancement of bisphenol A degradation in aqueous solution

Endocrine disruptors such as bisphenol A (BPA) adversely affect the environment and human health. Laccases are used for the efficient biodegradation of various persistent organic pollutants in an environmentally safe manner. However, the direct application of free laccases is generally hindered by short enzyme lifetimes, non-reusability, and the high cost of a single use. In this study, laccases were immobilized on a novel magnetic three-dimensional poly(ethylene glycol) diacrylate (PEGDA)-chitosan (CS) inverse opal hydrogel (LAC@MPEGDA@CS@IOH). The immobilized laccase showed significant improvement in the BPA degradation performance and superior storage stability compared with the free laccase. 91.1% of 100 mg/L BPA was removed by the LAC@MPEGDA@CS@IOH in 3 hr, whereas only 50.6% of BPA was removed by the same amount of the free laccase. Compared with the laccase, the outstanding BPA degradation efficiency of the LAC@MPEGDA@CS@IOH was maintained over a wider range of pH values and temperatures. Moreover, its relative activity of was maintained at 70.4% after 10 cycles, and the system performed well in actual water matrices. This efficient method for preparing immobilized laccases is simple and green, and it can be used to further develop ecofriendly biocatalysts to remove organic pollutants from wastewater.

Solar Energy-Promoted Bisphenol A Degradation with Immobilized Laccase in an Fe3O4-Embedded Metal-Organic Framework

Bisphenol A (BPA) is a well-recognized endocrine-disrupting chemical that poses risks to both human health and the environment. Laccase can effectively biodegrade bisphenol A, but the low environmental temperature (∼25 °C) restricts the biodegradation efficiency. In this study, the enzyme laccase and Fe3O4 with solar-thermal conversion capability were coimmobilized into zeolitic imidazolate framework-8 (Lac@ZIF-8-Fe3O4) to facilitate efficient biodegradation of bisphenol A under simulated solar irradiation. Compared to free laccase, Lac@ZIF-8-Fe3O4 exhibited high activity recovery (115.5%), an ∼39% increased catalytic constant, more effective bisphenol A biodegradation (up to 24-fold) at extensive bisphenol A concentrations (5-100 mg/L), excellent thermal stability (50 °C, 12 h), acid-tolerance (pH 3), and storage ability in 10 days. Simulated solar irradiation (1 kW/m2) increased the temperature of Lac@ZIF-8-Fe3O4 solution (10 μg laccase/mL) from 25 to 42.5 °C within 15 min, resulting in 96.4% biodegradation of bisphenol A within 60 min, nearly double the biodegradation efficiency under dark condition (55.9%). Furthermore, Lac@ZIF-8-Fe3O4 maintained 99.0% biodegradation efficiency even after 12 recycles of use under simulated solar irradiation (5 mg/L bisphenol A, 80 min/cycle). This work has thus offered efficient biocatalysis for integrating solar-energy promotion and enzymatic catalysis in treating environmental BPA pollutants. Further, the experimental findings benefited from the development of more sustainable and high-performance immobilized enzyme preparations for pollutant treatment via solar-thermal promotions.

Enhancing enzymatic catalysis efficiency: Immobilizing laccase on HHSS for synergistic bisphenol A adsorption and biodegradation through optimized external surface utilization

Laccase, a prominent enzyme biomacromolecule, exhibits promising catalytic efficiency in degrading phenolic compounds like bisphenol A (BPA). The laccase immobilized on conventional materials frequently demonstrates restricted loading and suboptimal catalytic performance. Hence, there is a pressing need to optimized external surface utilization to enhance catalytic performance. Herein, we synthesized amino-functionalized modified silica particles with a hierarchical hollow silica spherical (HHSS) structure for laccase immobilization via crosslinking, resulting in HHSS-LE biocatalysts. Through Box-Behnken design (BBD) and response surface methodology (RSM), we achieved a remarkably high enzyme loading of up to 213.102 mg/g. The synergistic effect of adsorption by HHSS and degradation by laccase facilitated efficient removal of BPA. The HHSS-LE demonstrated superior BPA removal capabilities, with efficiencies exceeding 100 % in the 50-200 mg/L BPA concentration range. Compared to MCM-41 and solid silica spheres (SSS), HHSS showed the highest enzyme loading capacity and catalytic activity, underscoring its superior external surface utilization rate per unit mass. Remarkably, the HHSS-LE biocatalyst exhibited remarkable recyclability even after 11 successive cycles of reuse. By preparing high immobilization rate with efficient external surface utilization, this study lays the foundation for the design of universally applicable and efficient enzyme immobilization catalysts.

Bioremediation of organic pollutants by laccase-metal-organic framework composites: A review of current knowledge and future perspective

Immobilized laccases are widely used as green biocatalysts for bioremediation of phenolic pollutants and wastewater treatment. Metal-organic frameworks (MOFs) show potential application for immobilization of laccase. Their unique adsorption properties provide a synergic effect of adsorption and biodegradation. This review focuses on bioremediation of wastewater pollutants using laccase-MOF composites, and summarizes the current knowledge and future perspective of their biodegradation and the enhancement strategies of enzyme immobilization. Mechanistic strategies of preparation of laccase-MOF composites were mainly investigated via physical adsorption, chemical binding, and de novo/co-precipitation approaches. The influence of architecture of MOFs on the efficiency of immobilization and bioremediation were discussed. Moreover, as sustainable technology, the integration of laccases and MOFs into wastewater treatment processes represents a promising approach to address the challenges posed by industrial pollution. The MOF-laccase composites can be promising and reliable alternative to conventional techniques for the treatment of wastewaters containing pharmaceuticals, dyes, and phenolic compounds. The detailed exploration of various immobilization techniques and the influence of MOF architecture on performance provides valuable insights for optimizing these composites, paving the way for future advancements in environmental biotechnology. The findings of this research have the potential to influence industrial wastewater treatment and promoting cleaner treatment processes and contributing to sustainability efforts.

One stone two birds: Recycling of an agri-waste to synthesize laccase-immobilized hierarchically porous magnetic biochar for efficient degradation of aflatoxin B1 in aqueous solutions and corn oil

Aflatoxin B1 (AFB1) contamination of oils is a serious concern for the safety of edible oil consumers. Enzyme-assisted detoxification of AFB1 is an efficient and safe method for decontaminating oils, but pristine enzymes are unstable in oils and require modifications before use. Therefore, we designed a novel and magnetically separable laccase-carrying biocatalyst containing spent-mushroom-substrate (SMS)-derived biochar (BF). Laccase was immobilized on NH2-activated magnetic biochar (BF-NH2) through covalent crosslinking, which provided physicochemical stability to the immobilized enzyme. After 30 days of storage at 4 °C, the immobilized laccase (product named "BF-NH2-Lac") retained ~95 % of its initial activity, while after five repeated cycles of ABTS oxidation, ~85 % activity retention was observed. BF-NH2-Lac was investigated for the oxidative degradation of AFB1, which exhibited superior performance compared to free laccase. Among many tested natural compounds as mediators, p-coumaric acid proved the most efficient in activating laccase for AFB1 degradation. BF-NH2-Lac demonstrated >90 % removal of AFB1 within 5.0 h, while the observed degradation efficiency in corn oil and buffer was comparable. An insight into the adsorptive and degradative removal of AFB1 revealed that AFB1 removal was governed mainly by degradation. The coexistence of multi-mycotoxins did not significantly affect the AFB1 degradation capability of BF-NH2-Lac. Investigation of the degradation products revealed the transformation of AFB1 into non-toxic AFQ1, while corn oil quality remained unaffected after BF-NH2-Lac treatment. Hence, this study holds practical importance for the research, knowledge-base and industrial application of newly proposed immobilized enzyme products.

Covalent organic framework in-situ immobilized laccase for the covalent polymerization removal of sulfamethoxazole in the presence of natural phenols: Prominent enzyme stability and activity

In current water treatment processes, pollutants are typically degraded into small molecules and CO2 for detoxification. This study employed laccase-mediated aggregation of new pollutants with natural phenolic compounds to remove pollutants by forming large molecular substances, effectively sequestering carbon. Free laccase is susceptible to environmental influences, causing deactivation. However, immobilizing laccase onto a carrier enhances enzyme stability. In the experiment, laccase was immobilized onto the covalent organic framework TpPa-1 through an in-situ loading process, resulting in immobilized laccase Lac@TpPa-1. Stability studies revealed that immobilized laccase outperformed free laccase in terms of pH, temperature, and recyclability. Moreover, immobilized laccase was employed for catalyzing the removal of emerging pollutants containing natural phenolic compounds, achieving an 80.53% removal rate with the addition of 0.02 g of laccase within 5 h. Analytical techniques like Fourier-transform ion cyclotron resonance mass spectrometry were used to uncover reaction pathways, demonstrating the presence of radical polymerization and 1, 4 nucleophilic addition. This research utilized TpPa-1 as a carrier for laccase immobilization, promoting oxidation-induced polymerization for efficient pollutant removal. It provides a theoretical foundation for understanding the interplay between emerging pollutants and phenolic compounds in natural environments and enhances the practical application of laccase through immobilization.

Co-Immobilization of Laccase and Mediator into Fe-Doped ZIF-8 Significantly Enhances the Degradation of Organic Pollutants

Co-immobilization of laccase and mediator 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) for wastewater treatment could simultaneously achieve the reusability of laccase and avoid secondary pollution caused by the toxic ABTS. Herein, Fe-induced mineralization was proposed to co-immobilize laccase and ABTS into a metal-organic framework (ZIF-8) within 30 min. Immobilized laccase (Lac@ZIF-8-Fe) prepared at a 1:1 mass ratio of Fe2+ to Zn2+ exhibited enhanced catalytic efficiency (2.6 times), thermal stability, acid tolerance, and reusability compared to free laccase. ABTS was then co-immobilized to form Lac+ABTS@ZIF-8-Fe (ABTS = 261.7 mg/g). Lac@ZIF-8-Fe exhibited significantly enhanced bisphenol A (BPA) removal performance over free laccase due to the local substrate enrichment effect and improved enzyme stability. Moreover, the Lac+ABTS@ZIF-8-Fe exhibited higher BPA removal efficiency than the free laccase+ABTS system, implying the presence of a proximity effect in Lac+ABTS@ZIF-8-Fe. In the successive malachite green (MG) removal, the MG degradation efficiency by Lac@ZIF-8-Fe was maintained at 96.6% at the fifth reuse with only an extra addition of 0.09 mM ABTS in each cycle. As for Lac+ABTS@ZIF-8-Fe, 58.5% of MG was degraded at the fifth cycle without an extra addition of ABTS. Taken together, this research has provided a novel strategy for the design of a co-immobilized laccase and ABTS system for the degradation of organic pollutants.

Graphene oxide dispersed mesoporous ZIF-8-encapsulated laccase for removal of toluidine blue with multiple enhanced stability

The extensive use and discharge of toluidine blue have caused serious problems to the water environment. As a green biocatalyst, laccase has the ability to decolorize the dyes, but it is limited by poor reusability and low stability. Metal-organic frameworks (MOFs) are a good platform for enzyme immobilization. However, due to the weak dispersion of MOFs, the enzyme activity is inevitably inhibited. Herein, we proposed to use graphene oxide (GO) as the dispersion medium of mesoporous ZIF-8 to construct MZIF-8/GO bi-carrier for laccase (FL) immobilization. On account of the narrower bandgap energy of FL@MZIF-8/GO (4.07 eV) than that of FL@MZIF-8 (4.69 eV), electron transport was enhanced which later increased the catalytic activity of the immobilized enzyme. Meanwhile, the improved hydrophilicity characterized by contact angle and full infiltration time further promoted the efficiency of the enzymatic reaction. Benefiting from such regulatory effects of GO, the composite showed excellent storage stability and reusability, as well as multifaceted enhancements including pH, thermal, and solvent adaptation. On the basis of the characterized synergistic effect of adsorption and degradation, FL@MZIF-8/GO was successfully applied to the degradation of toluidine blue (TB) with a removal rate of 94.8%. Even in actual treated wastewater, the highest removal rate still reached more than 80%. Based on the inner mechanism analysis and the universality study, this material is expected to be widely used in the degradation of pollutants in real water under complex environmental conditions.

Metal-organic frameworks for enzyme immobilization and nanozymes: A laccase-focused review

Laccases are natural catalysts with remarkable catalytic activity. However, their application is limited by their lack of stability. Metal-organic frameworks (MOFs) have emerged as a promising alternative for enzyme immobilization. Enzymes can be immobilized in MOFs via two approaches: postsynthetic immobilization and in situ immobilization. In postsynthetic immobilization, an enzyme is embedded after MOF formation by covalent interactions or adsorption. In contrast, in in situ immobilization, a MOF is formed in the presence of an enzyme. Additionally, MOFs have exhibited intrinsic enzyme-like activity. These materials, known as nanozymes when they have the ability to replace enzymes in certain catalytic processes, have multiple key advantages, such as low cost, easy preparation, and large surface areas. This review presents a general overview of the most recent advances in both enzyme@MOF biocatalysts and MOF-based nanozymes in different applications, with a focus on laccase, which is one of the most widely investigated enzymes with excellent industrial potential.

An Up-to-Date Review on the Remediation of Dyes and Phenolic Compounds from Wastewaters Using Enzymes Immobilized on Emerging and Nanostructured Materials: Promises and Challenges

Addressing the critical issue of water pollution, this review article emphasizes the need to remove hazardous dyes and phenolic compounds from wastewater. These pollutants pose severe risks due to their toxic, mutagenic, and carcinogenic properties. The study explores various techniques for the remediation of organic contaminants from wastewater, including an enzymatic approach. A significant challenge in enzymatic wastewater treatment is the loss of enzyme activity and difficulty in recovery post-treatment. To mitigate these issues, this review examines the strategy of immobilizing enzymes on newly developed nanostructured materials like graphene, carbon nanotubes (CNTs), and metal-organic frameworks (MOFs). These materials offer high surface areas, excellent porosity, and ample anchoring sites for effective enzyme immobilization. The review evaluates recent research on enzyme immobilization on these supports and their applications in biocatalytic nanoparticles. It also analyzes the impact of operational factors (e.g., time, pH, and temperature) on dye and phenolic compound removal from wastewater using these enzymes. Despite promising outcomes, this review acknowledges the challenges for large-scale implementation and offers recommendations for future research to tackle these obstacles. This review concludes by suggesting that enzyme immobilization on these emerging materials could present a sustainable, environmentally friendly solution to the escalating water pollution crisis.

Improved stability and activity of laccase through de novo and post-synthesis immobilization on a hierarchically porous metal-organic framework (ZIF-8)

Porous materials such as metal-organic frameworks (MOFs) are considered to be suitable materials for immobilizing enzymes to improve their stability. However, conventional MOFs reduce the enzymes' catalytic activity due to difficulties with mass transfer and diffusing reactants after their micropores are occupied by enzyme molecules. To address these issues, a novel hierarchically structured zeolitic imidazolate framework-8 (HZIF-8) was prepared to study the effects of different laccase immobilization approaches such as the post-synthesis (LAC@HZIF-8-P) and de novo (LAC@HZIF-8-D) immobilization of catalytic activities for removing 2,4-dichlorophenol (2,4-DCP). The results showed higher catalytic activity for the laccase-immobilized LAC@HZIF-8 prepared using different methods than for the LAC@MZIF-8 sample, with 80% of 2,4-DCP removed under optimal conditions. These results could be attributable to the multistage structure of HZIF-8. The LAC@HZIF-8-D sample was stable and superior to LAC@HZIF-8-P, maintaining a 2,4-DCP removal efficiency of 80% after three recycles and demonstrating superior laccase thermostability and storage stability. Moreover, after loading with copper nanoparticles, the LAC@HZIF-8-D approach exhibited a 2,4-DCP removal efficiency of 95%, a promising finding for its potential use in environmental purification.

Laccase encapsulation immobilized in mesoporous ZIF-8 for enhancement bisphenol A degradation

Endocrine disruptors (EDCs) such as bisphenol A (BPA) have many adverse effects on environment and human health. Laccase encapsulation immobilized in mesoporous ZIF-8 was prepared for efficient degradation of BPA. The ZIF-8 (PA) with highly ordered mesopores was synthesized using trimethylacetic acid (PA) as a template agent. On account of the improvement of skeletal stability by cross-linking agent glutaraldehyde, ZIF-8 (PA) realized laccase (FL) immobilization within the mesopores through encapsulation strategy. By replacing the template agent, the effect of pore size on the composite activity and immobilization efficiency by SEM characterization and kinetic analysis were investigated. Based on the physical protection of ZIF-8(PA) on laccase, as well as electrostatic interactions between substances and changes in surface functional groups (e.g. -OH, etc.), multifaceted enhancement including activity, stability, storability were engendered. FL@ZIF-8(PA) could maintain high activity in complex systems at pH 3-11, 10-70 °C or in organic solvent containing system, which exhibited an obvious improvement compared to free laccase and other reported immobilized laccase. Combined with TGA, FT-IR and Zeta potential analysis, the intrinsic mechanism was elaborated in detail. On this basis, FL@ZIF-8(PA) achieved efficient removal of BPA even under adverse conditions (removal rates all above 55% and up to 90.28%), and was suitable for a wide range of initial BPA concentrations. Combined with the DFT calculations on the adsorption energy and differential charge, the mesoporous could not only improve the enrichment performance of BPA on ZIFs, but also enhance the interaction stability. Finally, FL@ZIF-8(PA) was successfully applied to the degradation of BPA in coal industry wastewater. This work provides a new and ultra-high performances material for the organic pollution treatment in wastewater.

Covalent immobilization of lipase on an ionic liquid-functionalized magnetic Cu-based metal-organic framework with boosted catalytic performance in flavor ester synthesis

Enzymatic esterification plays an important role in the fields of chemistry and biotechnology. In this study, lipase was immobilized on an ionic liquid (IL)-modified magnetic metal-organic framework (MOF) and used to synthesize isoamyl acetate. The immobilized lipase (PPL-ILs/Fe₃O₄@MOF) showed 2.1-fold and 1.8-fold higher activity compared to the free and immobilized lipase without ILs (PPL-Fe₃O₄@MOF), respectively. In addition, the anti-denaturant ability and reusability of the PPL-ILs/Fe₃O₄@MOF were also higher than those of other samples. The ester yield reached 75.1% when the biocatalyst was used to synthesize isoamyl acetate in hexane. The synthesized supports supplied a good microenvironment for the immobilized lipase through multiple interactions. Results of the structural analysis showed that the conformation state of lipase molecules changed after immobilization. The magnetism of the prepared biocatalyst makes it easy to recycle so that PPL-ILs/Fe₃O₄@MOF maintained 70.2% of the initial activity after eight cycles. The prepared composite materials exhibited good potential in lipase immobilization with enhanced catalytic ability and stability.

Extension of the alkyl chain length to adjust the properties of laccase-mimicking MOFs for phenolic detection and discrimination

2-Methylimidazole (MIM) is a classic organic ligand that shows excellent thermal stability and chemical robustness and is widely used in ZIFs. Recently, transformations of MOFs have been realized by using metals or ligands. In this study, we propose a new strategy-adjusting MIM by extending the alkyl chain length -to change the properties of related MOFs. Furthermore, we used copper as the metal core to replace zinc to mimic the active sites of laccases (electron transfer between copper and imidazole ring). As a result, the nanostructures transformed from nanoleaves to nanovesicles, which changed the Cu(II)/Cu(I) ratio from 3.7 to 1.7, as well as the lattice constant (decreased the diffraction angle) and enzyme-like activity (inhibition). In addition, we revealed that superoxidase anions were the main factors responsible for its laccase-like activity. We applied it to detect and discriminate phenolics. Laccase-mimicking activity was best at pH 7.0. When compared to protein laccase, the Cu-MeIm nanozyme had a greater Vmax at the same mass concentration. It was used to identify and distinguish phenolics. In the presence of Cu-MeIm nanozymes, the linear range is 0.1-2 mM and the detection limit of 2,4-DCP is 0.034 mM.

Immobilization of laccase on chitosan functionalized halloysite nanotubes for degradation of Bisphenol A in aqueous solution: degradation mechanism and mineralization pathway

As a hazardous organic chemical raw material, Bisphenol A (BPA) has attracted a great deal of scientific and public attention. In this study, the chitosan functionalized halloysite nanotubes immobilized laccase (lac@CS-HNTs) was prepared by simultaneous adsorption-covalent binding method to remove BPA for the first time. We optimized the preparation of lac@CS-NHTs by controlling one-factor variable method and response surface methodology (RSM). The cubic polynomial regression model via Design-Expert 12 was developed to describe the optimal preparation conditions of immobilized laccase. Under the optimal conditions, lac@CS-NHTs obtained the maximum enzyme activity, and the enzyme loading was as high as 60.10 mg/g. The results of batch removal experiment of BPA showed that under the optimum treatment condition, the BPA removal rate of lac@CS-NHTs, FL and heat-inactivated lac@CS-NHTs was 87.31 %, 60.89 % and 24.54 %, respectively, which indicated that the contribution of biodegradation was greater than adsorption. In addition, the relative activity of lac@CS-NHTs dropped to about 44.24 % after 8 cycles of BPA removal, which demonstrated that lac@CS-NHTs have the potential to reduce costs in practical applications. Finally, the possible degradation mechanism and mineralization pathway of BPA were given via High-performance liquid chromatography (HPLC) analysis and gas chromatography-mass spectrometry (GC-MS) analysis.

Adsorption and removal of direct red 31 by Cu-MOF: optimization by response surface

Cu(PABA) is a Cu-based MOF material assembled from Cu²⁺ and the organic ligand p-aminobenzoic acid (PABA). Cu (PABA) was synthesized by a solvothermal method, characterized and applied to the adsorption of direct red 31 dye (DR-31). The effects of pH, DR-31 concentration and temperature on the adsorption performance of Cu(PABA) were investigated. The adsorption kinetics were analyzed by pseudo-first-order, pseudo-second-order and intra-particle diffusion models, and the adsorption equilibrium data was fitted by Langmuir and Freundlich isotherm models. The pseudo-first-order kinetics and Langmuir model satisfactorily described the adsorption kinetics and adsorption equilibrium, respectively. The maximum adsorption capacity of Cu(PABA) for DR-31 dye at room temperature was 1,244.8 mg/g, as calculated using the Langmuir adsorption isotherm model. By response surface methodology (RSM), the optimal adsorption was found at pH value of 10.9, DR-31 dye concentration of 216.6 mg/L, and temperature of 27 °C, and the removal rate was as high as 99.4%. Therefore, Cu(PABA) can be used as an efficient adsorbent for removing DR-31 dye from aqueous solution.

Efficient removal of plastic additives by sunlight active titanium dioxide decorated Cd-Mg ferrite nanocomposite: Green synthesis, kinetics and photoactivity

Large use of flame retardants or additives in plastic industries have caused scientific attention as their leaching from consumer products is indicative of environmental concern. Moreover, plastic additives have proven features of endocrine disruptors, genotoxicity and persistence. Therefore, photodegradation of tetrabromobisphenol A (TBBPA) and bisphenol A (BPA) were explored in water. Seeing environmental safety, titanium dioxide decorated magnesium substituted cadmium ferrite (CdMgFe₂O₄@TiO₂) was synthesized by using plant extract of M. koenigii via co-precipitation. Sharp peaks obtained in PXRD ensured high crystallinity and purity of distorted spherical nanocomposite (5-25 nm). Subsequently, CdMgFe₂O₄@TiO₂ nanocatalyst was evaluated for the effective elimination of plastic additives at variable reaction parameters (pollutant: 2-10 mgL^-1; catalyst: 5-25 mg; pH: 3-7, dark-sunlight). With 20 mg of catalytic dose, CdMgFe₂O₄@TiO₂ showed maximum degradation of 2 mgL^-1 of TBBPA (91%) and BPA (94%) at neutral pH under sunlight. Considerable reduction in persistence of TBBPA (t_1/2:2.4 h) and BPA (t_1/2:2.1 h) indicated admirable photoactivity of CdMgFe₂O₄@TiO₂. Results were supported by BET, zeta potential, band reflectance and photoluminescence analysis that indicated for higher surface area (90 m²g^-1), larger particle stability (-20 mV), lower band gap (1.9 eV) and inhibited charge-pairs recombination in nanocomposite. Degradation consisted of initial Langmuir-adsorption followed by first order kinetics. Scavenger analysis revealed the role of hydroxyl radical in photodegradation studies. Nanocomposite was effective up to eight cycles without any significant loss of activity that advocated its high-sustainability and cost-effectiveness. Overall, with excellent surface characteristics, green synthesized CdMgFe₂O₄@TiO₂ nanocomposite is a promising and alternative photocatalyst for industrial applications.

Efficient degradation of organic pollutants by novel titanium dioxide coupled bismuth oxide nanocomposite: Green synthesis, kinetics and photoactivity

Herein, a green and facile methodology was used for the structural design of semiconductor nanomaterials and employed as efficient photocatalyst to resolve the environmental issues of water pollutants. Titanium oxide coupled with bismuth oxide (TiO₂@Bi₂O₃) nanocomposite was synthesized by employing the seed extract of Sapindus mukorossi (commonly found plant in India) and subsequently used for the elimination of toxic, and persistence industrial pollutants namely bisphenol A (BPA) and methylene blue (MB). Microscopic and spectroscopic techniques revealed particle size of synthesized nanocomposite found less than 50 nm along with high crystallinity. Appearance of stretching vibrations at 459 cm^-1 for Bi-O-Ti in the IR spectra of nanocomposite has established the coupling of TiO₂ with Bi₂O₃. The parameters of degradation were optimized by varying the pollutant concentration, catalytic amount and pH in the presence of natural sunlight. The nanocomposite TiO₂@Bi₂O₃ showed maximum degradation (MB: 94% and BPA: 91%) at a minimum concentration of pollutant (50 mgL^-1) with catalyst amount (35 mg), neutral pH and reduces half-life of pollutants (BPA: 1h, MB: 0.5h). Owing of higher surface area (80 m²g^-1), lower band gap (2.5 eV), and more negative zeta potential value (-40.3 mV) results into excellent photocatalytic properties. The breakage of S-N conjugated system in MB results into rapid degradation as compare to BPA. The degradation followed first-order kinetics and Langmuir adsorption in both the cases. Presence of active radicals during the photocatalysis process was responsible for quick degradation and strongly supported by scavenger analysis. GC-MS analysis revealed the degradation of toxic pollutants into safer metabolites and finally mineralized. Multiple times (n = 8) reusability of green photocatalyst advocated sustainability and appropriate for industrial applications.